def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Skeinforge', self, '')
self.profileType = settings.MenuButtonDisplay().getFromName(
'Profile Type: ', self)
self.profileSelection = settings.MenuButtonDisplay().getFromName(
'Profile Selection: ', self)
addToProfileMenu(self.profileSelection, self.profileType, self)
settings.LabelDisplay().getFromName('Search:', self)
reprapSearch = settings.HelpPage().getFromNameAfterHTTP(
'github.com/ahmetcemturan/SFACT', 'SFACT Update', self)
skeinforgeSearch = settings.HelpPage().getFromNameAfterHTTP(
'www.reprapfordummies.net/index.php/softwaresection/44-gcode-generators/49-sfact-homepage',
'SFACT Help', self)
skeinforgeSearch.column += 6
webSearch = settings.HelpPage().getFromNameAfterHTTP(
'www.reprap.org', 'Reprap', self)
webSearch.column += 4
versionText = archive.getFileText(archive.getVersionFileName())
self.version = settings.LabelDisplay().getFromName(
'Version: ' + versionText, self)
settings.LabelDisplay().getFromName('', self)
importantFileNames = ['craft', 'profile']
getRadioPluginsAddPluginGroupFrame(archive.getSkeinforgePluginsPath(),
importantFileNames,
getPluginFileNames(), self)
self.executeTitle = 'Skeinforge'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge.skeinforge.html', '', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Skeinforge', self, '')
versionText = gcodec.getFileText(gcodec.getVersionFileName())
self.createdOnLabel = settings.LabelDisplay().getFromName(
'Created On: ' + versionText, self)
self.profileType = settings.MenuButtonDisplay().getFromName(
'Profile Type: ', self)
self.profileSelection = settings.MenuButtonDisplay().getFromName(
'Profile Selection: ', self)
addToProfileMenu(self.profileSelection, self.profileType, self)
settings.LabelDisplay().getFromName('Search:', self)
reprapSearch = settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_reprap.html', 'Reprap', self)
skeinforgeSearch = settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_skeinforge.html', 'Skeinforge',
self)
skeinforgeSearch.column += 2
webSearch = settings.HelpPage().getFromNameAfterHTTP(
'members.axion.net/~enrique/search_web.html', 'Web', self)
webSearch.column += 4
settings.LabelDisplay().getFromName('', self)
importantFileNames = ['craft', 'profile']
getRadioPluginsAddPluginGroupFrame(getPluginsDirectoryPath(),
importantFileNames,
getPluginFileNames(), self)
self.executeTitle = 'Skeinforge'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.skeiniso.html', self)
self.baseNameSynonym = 'behold.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Skeiniso', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skeiniso')
self.activateSkeiniso = settings.BooleanSetting().getFromValue('Activate Skeiniso', self, True )
self.addAnimation()
self.axisRulings = settings.BooleanSetting().getFromValue('Axis Rulings', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Banding -', self )
self.bandHeight = settings.IntSpinUpdate().getFromValue( 0, 'Band Height (layers):', self, 10, 5 )
self.bottomBandBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Band Brightness (ratio):', self, 1.0, 0.7 )
self.bottomLayerBrightness = settings.FloatSpinUpdate().getFromValue( 0.0, 'Bottom Layer Brightness (ratio):', self, 1.0, 1.0 )
self.brightBandStart = settings.MenuButtonDisplay().getFromName('Bright Band Start:', self )
self.fromTheBottom = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Bottom', self, False )
self.fromTheTop = settings.MenuRadio().getFromMenuButtonDisplay( self.brightBandStart, 'From the Top', self, True )
settings.LabelSeparator().getFromRepository(self)
self.drawArrows = settings.BooleanSetting().getFromValue('Draw Arrows', self, False )
self.goAroundExtruderOffTravel = settings.BooleanSetting().getFromValue('Go Around Extruder Off Travel', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layer = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Layer (index):', self, 912345678, 0 )
self.layerExtraSpan = settings.IntSpinUpdate().getSingleIncrementFromValue( - 912345678, 'Layer Extra Span (integer):', self, 912345678, 912345678 )
settings.LabelSeparator().getFromRepository(self)
self.line = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Line (index):', self, 912345678, 0 )
self.mouseMode = settings.MenuButtonDisplay().getFromName('Mouse Mode:', self )
self.displayLine = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'Display Line', self, True )
self.viewMove = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Move', self, False )
self.viewRotate = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Rotate', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Number of Fill Layers -', self )
self.numberOfFillBottomLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Bottom Layers (integer):', self, 5, 1 )
self.numberOfFillTopLayers = settings.IntSpinUpdate().getFromValue( 0, 'Number of Fill Top Layers (integer):', self, 5, 1 )
settings.LabelSeparator().getFromRepository(self)
self.addScaleScreenSlide()
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Viewpoint -', self )
self.viewpointLatitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Latitude (degrees):', self, 180.0, 15.0 )
self.viewpointLongitude = settings.FloatSpin().getFromValue( 0.0, 'Viewpoint Longitude (degrees):', self, 360.0, 210.0 )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Width -', self )
self.widthOfAxisNegativeSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Negative Side (pixels):', self, 10, 2 )
self.widthOfAxisPositiveSide = settings.IntSpinUpdate().getFromValue( 0, 'Width of Axis Positive Side (pixels):', self, 10, 6 )
self.widthOfFillBottomThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Bottom Thread (pixels):', self, 10, 2 )
self.widthOfFillTopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Fill Top Thread (pixels):', self, 10, 2 )
self.widthOfInfillThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Infill Thread (pixels):', self, 10, 1 )
self.widthOfLoopThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Loop Thread (pixels):', self, 10, 2 )
self.widthOfPerimeterInsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Inside Thread (pixels):', self, 10, 8 )
self.widthOfPerimeterOutsideThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Perimeter Outside Thread (pixels):', self, 10, 8 )
self.widthOfRaftThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Raft Thread (pixels):', self, 10, 1 )
self.widthOfSelectionThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Selection Thread (pixels):', self, 10, 6 )
self.widthOfTravelThread = settings.IntSpinUpdate().getFromValue( 0, 'Width of Travel Thread (pixels):', self, 10, 0 )
self.executeTitle = 'Skeiniso'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Skeinforge', self, '')
self.profileType = settings.MenuButtonDisplay().getFromName('Profile Type: ', self )
self.profileType.columnspan = 6
self.profileSelection = settings.MenuButtonDisplay().getFromName('Profile Selection: ', self)
self.profileSelection.columnspan = 6
addToProfileMenu( self.profileSelection, self.profileType, self )
settings.LabelDisplay().getFromName('', self)
importantFileNames = ['craft', 'profile']
getRadioPluginsAddPluginGroupFrame(archive.getSkeinforgePluginsPath(), importantFileNames, getPluginFileNames(), self)
self.executeTitle = 'Skeinforge'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge.skeinforge_tools.craft_plugins.inset.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Inset', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Inset'
)
self.addCustomCodeForTemperatureReading = settings.BooleanSetting(
).getFromValue('Add Custom Code for Temperature Reading', self, True)
self.bridgeWidthMultiplier = settings.FloatSpin().getFromValue(
0.8, 'Bridge Width Multiplier (ratio):', self, 1.2, 1.0)
self.loopOrderChoice = settings.MenuButtonDisplay().getFromName(
'Loop Order Choice:', self)
self.loopOrderAscendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Ascending Area',
self, True)
self.loopOrderDescendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Descending Area',
self, False)
self.overlapRemovalWidthOverPerimeterWidth = settings.FloatSpin(
).getFromValue(0.3,
'Overlap Removal Width over Perimeter Width (ratio):',
self, 0.9, 0.6)
self.turnExtruderHeaterOffAtShutDown = settings.BooleanSetting(
).getFromValue('Turn Extruder Heater Off at Shut Down', self, True)
self.executeTitle = 'Inset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.analyze_plugins.skeinlayer.html', self)
self.baseNameSynonym = 'skeinview.csv'
self.fileNameInput = settings.FileNameInput().getFromFileName( [ ('Gcode text files', '*.gcode') ], 'Open File for Skeinlayer', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Skeinlayer')
self.activateSkeinlayer = settings.BooleanSetting().getFromValue('Activate Skeinlayer', self, True )
self.addAnimation()
self.drawArrows = settings.BooleanSetting().getFromValue('Draw Arrows', self, True )
self.goAroundExtruderOffTravel = settings.BooleanSetting().getFromValue('Go Around Extruder Off Travel', self, False )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Layers -', self )
self.layer = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Layer (index):', self, 912345678, 0 )
self.layerExtraSpan = settings.IntSpinUpdate().getSingleIncrementFromValue( - 3, 'Layer Extra Span (integer):', self, 3, 0 )
settings.LabelSeparator().getFromRepository(self)
self.line = settings.IntSpinNotOnMenu().getSingleIncrementFromValue( 0, 'Line (index):', self, 912345678, 0 )
self.mouseMode = settings.MenuButtonDisplay().getFromName('Mouse Mode:', self )
self.displayLine = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'Display Line', self, True )
self.viewMove = settings.MenuRadio().getFromMenuButtonDisplay( self.mouseMode, 'View Move', self, False )
self.addScaleScreenSlide()
self.showPosition = settings.BooleanSetting().getFromValue('Show Position', self, True )
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Width -', self )
self.widthOfExtrusionThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Extrusion Thread (pixels):', self, 5, 3 )
self.widthOfSelectionThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Selection Thread (pixels):', self, 10, 6 )
self.widthOfTravelThread = settings.IntSpinUpdate().getSingleIncrementFromValue( 0, 'Width of Travel Thread (pixels):', self, 5, 1 )
self.executeTitle = 'Skeinlayer'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool', self, True)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.coolType = settings.MenuButtonDisplay().getFromName('Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbit', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down', self, True)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Alteration Files -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Name of Cool End File:', self, 'cool_end.gcode')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Name of Cool Start File:', self, 'cool_start.gcode')
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge.skeinforge_tools.craft_plugins.cool.html', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://www.bitsfrombytes.com/wiki/index.php?title=Skeinforge_Cool'
)
self.activateCool = settings.BooleanSetting().getFromValue(
'Activate Cool', self, True)
self.coolType = settings.MenuButtonDisplay().getFromName(
'Cool Type:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Orbit', self, True)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(
self.coolType, 'Slow Down', self, False)
self.maximumCool = settings.FloatSpin().getFromValue(
0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.minimumLayerTime = settings.FloatSpin().getFromValue(
0.0, 'Minimum Layer Time (seconds):', self, 120.0, 60.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue(
'Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue(
'Turn Fan Off at Ending', self, True)
self.executeTitle = 'Cool'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.cool.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Cool', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Cool')
self.activateCool = settings.BooleanSetting().getFromValue('Activate Cool.. but use with a fan!', self, False)
settings.LabelDisplay().getFromName('- When To use Cool?-', self )
self.minimumLayerTime = settings.FloatSpin().getFromValue(0.0, 'Use Cool if layer takes shorter than(seconds):', self, 120.0, 10.0)
self.minimumLayerFeedrate = settings.FloatSpin().getFromValue(5.0, 'Do not go slower than (mm/s):', self, 50.0, 15.0)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- What to do if Cool is necessary? -', self )
self.turnFanOnAtBeginning = settings.BooleanSetting().getFromValue('Turn Fan On at Beginning', self, True)
self.turnFanOffAtEnding = settings.BooleanSetting().getFromValue('Turn Fan Off at Ending', self, True)
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- Name of Macro (gmc) Files to execute -', self )
self.nameOfCoolEndFile = settings.StringSetting().getFromValue('Execute when Cool ends:', self, 'cool_end.gmc')
self.nameOfCoolStartFile = settings.StringSetting().getFromValue('Execute when Cool starts:', self, 'cool_start.gmc')
settings.LabelSeparator().getFromRepository(self)
settings.LabelDisplay().getFromName('- How to Cool? -', self )
self.coolType = settings.MenuButtonDisplay().getFromName('Cool by:', self)
self.orbit = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Orbiting around Object', self, False)
self.slowDown = settings.MenuRadio().getFromMenuButtonDisplay(self.coolType, 'Slow Down during print', self, True)
settings.LabelSeparator().getFromRepository(self)
self.maximumCool = settings.FloatSpin().getFromValue(0.0, 'Maximum Cool (Celcius):', self, 10.0, 2.0)
self.bridgeCool = settings.FloatSpin().getFromValue(0.0, 'Bridge Cool (Celcius):', self, 10.0, 1.0)
self.minimumOrbitalRadius = settings.FloatSpin().getFromValue(
0.0, 'Minimum Orbital Radius (millimeters):', self, 20.0, 10.0)
settings.LabelSeparator().getFromRepository(self)
self.orbitalOutset = settings.FloatSpin().getFromValue(1.0, 'Orbital Outset (millimeters):', self, 5.0, 2.0)
self.executeTitle = 'Cool'
def forwardDeclartions():
"Force some functions to be dynamic"
mockRepository = settings.Repository()
settings.addListsToRepository(None, None, mockRepository)
settings.cancelRepository(mockRepository)
settings.getDisplayedDialogFromConstructor(mockRepository)
settings.getProfileBaseName(mockRepository)
settings.getReadRepository(mockRepository)
settings.readSettingsFromText(mockRepository, '')
settings.saveRepository(mockRepository)
settings.startMainLoopFromConstructor(mockRepository)
settings.writeSettings(mockRepository)
settings.writeSettingsPrintMessage(mockRepository)
settings.StringSetting().getFromValue('', mockRepository, '')
settings.StringSetting().getFromValueOnly('', mockRepository, '')
settings.StringSetting().getFromValueOnlyAddToRepository('', mockRepository, '')
settings.FileNameInput().getFromFileName([('','')], '', mockRepository, '')
settings.GridVertical(0, 0).setExecutablesRepository(mockRepository)
settings.HelpPage().setToNameRepository('', mockRepository)
settings.HelpPage().getFromNameAfterWWW('', '', mockRepository)
settings.HelpPage().getFromNameAfterHTTP('', '', mockRepository)
settings.HelpPage().getFromNameSubName('', mockRepository, '')
settings.HelpPageRepository.__init__(settings.HelpPageRepository(), mockRepository)
settings.LabelDisplay().getFromName('', mockRepository)
settings.LabelSeparator().getFromRepository(mockRepository)
settings.MenuButtonDisplay().getFromName('', mockRepository)
settings.Radio().getFromRadio(None, '', mockRepository, False)
settings.WindowPosition().getFromValue(mockRepository, '')
settings.RepositoryDialog(mockRepository, None).addButtons(mockRepository, None)
settings.RepositoryDialog.__init__(RepositoryDialog(), mockRepository, None)
gcodec.Plugins.add(settings.Plugin())
Tkinter.Button.__init__(None, {})
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.export.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue('Activate Export', self, True )
self.alsoSendOutputTo = settings.StringSetting().getFromValue('Also Send Output To:', self, '')
self.commentChoice = settings.MenuButtonDisplay().getFromName('Comment Choice:', self )
self.doNotDeleteComments = settings.MenuRadio().getFromMenuButtonDisplay(self.commentChoice, 'Do Not Delete Comments', self, False)
self.deleteCraftingComments = settings.MenuRadio().getFromMenuButtonDisplay(self.commentChoice, 'Delete Crafting Comments', self, False)
self.deleteAllComments = settings.MenuRadio().getFromMenuButtonDisplay(self.commentChoice, 'Delete All Comments', self, True)
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath(__file__, 'export_plugins')
exportStaticDirectoryPath = os.path.join(exportPluginsFolderPath, 'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(exportPluginsFolderPath)
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(exportStaticDirectoryPath)
self.exportLabel = settings.LabelDisplay().getFromName('Export Operations: ', self)
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio(exportLatentStringVar, 'Do Not Change Output', self, True)
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join(exportPluginsFolderPath, exportPluginFileName)
exportPlugin = settings.RadioCapitalizedButton().getFromPath(exportLatentStringVar, exportPluginFileName, path, self, False)
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio(exportLatentStringVar, exportPluginFileName, self, False)
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append(exportPlugin)
self.fileExtension = settings.StringSetting().getFromValue('File Extension:', self, 'gcode')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue('Save Penultimate Gcode', self, False)
self.executeTitle = 'Export'
def __init__(self):
"Set the default settings, execute title & settings fileName."
settings.addListsToRepository('skeinforge.html', '', self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Skeinforge', self, '')
versionText = gcodec.getFileText(gcodec.getVersionFileName())
self.profileType = settings.MenuButtonDisplay().getFromName(
'Profile Type: ', self)
self.profileSelection = settings.MenuButtonDisplay().getFromName(
'Profile Selection: ', self)
addToProfileMenu(self.profileSelection, self.profileType, self)
settings.LabelDisplay().getFromName('Web Help:', self)
reprapSearch = settings.HelpPage().getFromNameAfterHTTP(
'www.bitsfrombytes.com/wiki/index.php?title=Skeinforge',
'Bfb Wiki', self)
settings.LabelDisplay().getFromName('', self)
importantFileNames = ['craft', 'profile']
getRadioPluginsAddPluginGroupFrame(getPluginsDirectoryPath(),
importantFileNames,
getPluginFileNames(), self)
self.executeTitle = 'Skeinforge'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository('skeinforge_application.skeinforge_plugins.craft_plugins.inset.html', self )
self.fileNameInput = settings.FileNameInput().getFromFileName( fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File for Inset', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute('http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Inset')
# self.addCustomCodeForTemperatureReading = settings.BooleanSetting().getFromValue('Add Custom Code for Temperature Reading', self, True )
self.bridgeWidthMultiplier = settings.FloatSpin().getFromValue( 0.7, 'Bridge Width Multiplier (ratio):', self, 2.0, 1.0 )
self.nozzleDiameter = settings.FloatSpin().getFromValue( 0.1, 'Nozzle Diameter(mm):', self, 1.0, 0.50 )
self.loopOrderChoice = settings.MenuButtonDisplay().getFromName('In case of Conflict Solve:', self )
self.loopOrderAscendingArea = settings.MenuRadio().getFromMenuButtonDisplay( self.loopOrderChoice, 'Prefer Loops', self, True )
self.loopOrderDescendingArea = settings.MenuRadio().getFromMenuButtonDisplay( self.loopOrderChoice, 'Prefer Perimeter', self, False )
self.overlapRemovalWidthOverPerimeterWidth = settings.FloatSpin().getFromValue( 0.5, 'Overlap Removal(Scaler):', self, 1.5, 1.0 )
# self.turnExtruderHeaterOffAtShutDown = settings.BooleanSetting().getFromValue('Turn Extruder Heater Off at Shut Down', self, True )
self.executeTitle = 'Inset'
def __init__(self):
"Set the default settings, execute title & settings fileName."
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.inset.html',
self)
self.baseNameSynonymDictionary = {
'Infill in Direction of Bridge': 'carve.csv',
'Infill Width over Thickness (ratio):': 'fill.csv'
}
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Inset', self, '')
self.openWikiManualHelpPage = settings.HelpPage(
).getOpenFromDocumentationSubName(
'skeinforge_application.skeinforge_plugins.craft_plugins.inset.html'
)
self.addCustomCodeForTemperatureReading = settings.BooleanSetting(
).getFromValue('Add Custom Code for Temperature Reading', self, True)
self.infillInDirectionOfBridge = settings.BooleanSetting(
).getFromValue('Infill in Direction of Bridge', self, True)
self.infillWidthOverThickness = settings.FloatSpin().getFromValue(
1.3, 'Infill Width over Thickness (ratio):', self, 1.7, 1.5)
self.loopOrderChoice = settings.MenuButtonDisplay().getFromName(
'Loop Order Choice:', self)
self.loopOrderAscendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Ascending Area',
self, True)
self.loopOrderDescendingArea = settings.MenuRadio(
).getFromMenuButtonDisplay(self.loopOrderChoice, 'Descending Area',
self, False)
self.overlapRemovalWidthOverEdgeWidth = settings.FloatSpin(
).getFromValue(0.3,
'Overlap Removal Width over Perimeter Width (ratio):',
self, 0.9, 0.6)
self.turnExtruderHeaterOffAtShutDown = settings.BooleanSetting(
).getFromValue('Turn Extruder Heater Off at Shut Down', self, True)
self.volumeFraction = settings.FloatSpin().getFromValue(
0.7, 'Volume Fraction (ratio):', self, 0.9, 0.82)
self.executeTitle = 'Inset'
def __init__(self):
'Set the default settings, execute title & settings fileName.'
skeinforge_profile.addListsToCraftTypeRepository(
'skeinforge_application.skeinforge_plugins.craft_plugins.export.html',
self)
self.fileNameInput = settings.FileNameInput().getFromFileName(
fabmetheus_interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File for Export', self, '')
self.openWikiManualHelpPage = settings.HelpPage().getOpenFromAbsolute(
'http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge_Export')
self.activateExport = settings.BooleanSetting().getFromValue(
'Activate Export', self, True)
self.addExportSuffix = settings.BooleanSetting().getFromValue(
'Add _export to filename (filename_export)', self, True)
self.alsoSendOutputTo = settings.StringSetting().getFromValue(
'Also Send Output To:', self, '')
self.commentChoice = settings.MenuButtonDisplay().getFromName(
'Handling of Comments in G-Code:', self)
self.doNotDeleteComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Do Not Delete Comments', self, False)
self.deleteCraftingComments = settings.MenuRadio(
).getFromMenuButtonDisplay(self.commentChoice,
'Delete Crafting Comments', self, False)
self.deleteAllComments = settings.MenuRadio().getFromMenuButtonDisplay(
self.commentChoice, 'Delete All Comments', self, True)
exportPluginsFolderPath = archive.getAbsoluteFrozenFolderPath(
__file__, 'export_plugins')
exportStaticDirectoryPath = os.path.join(exportPluginsFolderPath,
'static_plugins')
exportPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportPluginsFolderPath)
exportStaticPluginFileNames = archive.getPluginFileNamesFromDirectoryPath(
exportStaticDirectoryPath)
settings.LabelDisplay().getFromName(' ', self)
self.exportLabel = settings.LabelDisplay().getFromName(
'--Export Operations-- ', self)
self.exportPlugins = []
exportLatentStringVar = settings.LatentStringVar()
self.doNotChangeOutput = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, 'Do Not Change Output', self, True)
self.doNotChangeOutput.directoryPath = None
allExportPluginFileNames = exportPluginFileNames + exportStaticPluginFileNames
for exportPluginFileName in allExportPluginFileNames:
exportPlugin = None
if exportPluginFileName in exportPluginFileNames:
path = os.path.join(exportPluginsFolderPath,
exportPluginFileName)
exportPlugin = settings.RadioCapitalizedButton().getFromPath(
exportLatentStringVar, exportPluginFileName, path, self,
False)
exportPlugin.directoryPath = exportPluginsFolderPath
else:
exportPlugin = settings.RadioCapitalized().getFromRadio(
exportLatentStringVar, exportPluginFileName, self, False)
exportPlugin.directoryPath = exportStaticDirectoryPath
self.exportPlugins.append(exportPlugin)
self.fileExtension = settings.StringSetting().getFromValue(
'File Extension (gcode):', self, 'gcode')
self.nameOfReplaceFile = settings.StringSetting().getFromValue(
'Name of Replace File:', self, 'replace.csv')
self.savePenultimateGcode = settings.BooleanSetting().getFromValue(
'Save Penultimate Gcode', self, True)
# settings.LabelDisplay().getFromName(' ', self)
# settings.LabelDisplay().getFromName('--Profile Sharing and Archiving--', self)
# self.archiveProfile = settings.BooleanSetting().getFromValue('Archive Used Profile As Zip', self, False)
# self.exportProfileAsCsv = settings.BooleanSetting().getFromValue('Export Profile Values As CSV File', self, False)
settings.LabelDisplay().getFromName(' ', self)
settings.LabelDisplay().getFromName('--File Name Alterations--', self)
settings.LabelDisplay().getFromName(
'"WARNING" IF ANY OF BELOW CHECKBOXES ARE CHECKED', self)
settings.LabelDisplay().getFromName(
'SFACT WILL NOT WORK FROM WITHIN PRONTERFACE!!', self)
self.addProfileExtension = settings.BooleanSetting().getFromValue(
'Add Profile Extension', self, False)
self.addDescriptiveExtension = settings.BooleanSetting().getFromValue(
'Add Descriptive Extension', self, False)
self.addTimestampExtension = settings.BooleanSetting().getFromValue(
'Add Timestamp Extension', self, False)
self.executeTitle = 'Export'
