def generate_inputs(
configuration_file_path: str,
source_path: str = None,
source_path_schema="native",
overwrite: bool = False,
) -> str:
"""
Generates input file for the :class:`FASTOADProblem` specified in configuration_file_path.
:param configuration_file_path: where the path of input file to write is set
:param source_path: path of file data will be taken from
:param source_path_schema: set to 'legacy' if the source file come from legacy FAST
:param overwrite: if True, file will be written even if one already exists
:return: path of generated file
:raise FastFileExistsError: if overwrite==False and configuration_file_path already exists
"""
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
input_file_path = conf.input_file_path
if not overwrite and pth.exists(conf.input_file_path):
raise FastFileExistsError(
"Input file %s not written because it already exists. "
"Use overwrite=True to bypass." % input_file_path,
input_file_path,
)
if source_path_schema == "legacy":
conf.write_needed_inputs(source_path, VariableLegacy1XmlFormatter())
else:
conf.write_needed_inputs(source_path)
_LOGGER.info("Problem inputs written in %s", input_file_path)
return input_file_path
def write_n2(configuration_file_path: str, n2_file_path: str = "n2.html", overwrite: bool = False):
"""
Write the N2 diagram of the problem in file n2.html
:param configuration_file_path:
:param n2_file_path:
:param overwrite:
"""
if not overwrite and pth.exists(n2_file_path):
raise FastFileExistsError(
"N2-diagram file %s not written because it already exists. "
"Use overwrite=True to bypass." % n2_file_path,
n2_file_path,
)
make_parent_dir(n2_file_path)
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem()
problem.setup()
problem.final_setup()
om.n2(problem, outfile=n2_file_path, show_browser=False)
clear_output()
_LOGGER.info("N2 diagram written in %s", pth.abspath(n2_file_path))
def optimization_viewer(configuration_file_path: str):
"""
Displays optimization information and enables its editing
:param configuration_file_path: problem definition
:return: display of the OptimizationViewer
"""
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
viewer = OptimizationViewer()
viewer.load(conf)
return viewer.display()
def _run_problem(
configuration_file_path: str,
overwrite: bool = False,
mode="run_model",
auto_scaling: bool = False,
) -> FASTOADProblem:
"""
Runs problem according to provided file
:param configuration_file_path: problem definition
:param overwrite: if True, output file will be overwritten
:param mode: 'run_model' or 'run_driver'
:param auto_scaling: if True, automatic scaling is performed for design variables and
constraints
:return: the OpenMDAO problem after run
:raise FastFileExistsError: if overwrite==False and output data file of problem already exists
"""
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem(read_inputs=True, auto_scaling=auto_scaling)
outputs_path = pth.normpath(problem.output_file_path)
if not overwrite and pth.exists(outputs_path):
raise FastFileExistsError(
"Problem not run because output file %s already exists. "
"Use overwrite=True to bypass." % outputs_path,
outputs_path,
)
problem.setup()
start_time = time()
if mode == "run_model":
problem.run_model()
problem.optim_failed = False # Actually, we don't know
else:
problem.optim_failed = problem.run_driver()
end_time = time()
computation_time = round(end_time - start_time, 2)
problem.write_outputs()
if problem.optim_failed:
_LOGGER.error("Optimization failed after " + str(computation_time) +
" seconds")
else:
_LOGGER.info("Computation finished after " + str(computation_time) +
" seconds")
_LOGGER.info("Problem outputs written in %s", outputs_path)
return problem
def write_xdsm(
configuration_file_path: str,
xdsm_file_path: str = None,
overwrite: bool = False,
depth: int = 2,
wop_server_url: str = None,
dry_run: bool = False,
):
"""
:param configuration_file_path:
:param xdsm_file_path: the path for HTML file to be written (will overwrite if needed)
:param overwrite: if False, will raise an error if file already exists.
:param depth: the depth analysis for WhatsOpt
:param wop_server_url: URL of WhatsOpt server (if None, ether.onera.fr/whatsopt will be used)
:param dry_run: if True, will run wop without sending any request to the server. Generated
XDSM will be empty. (for test purpose only)
:return: path of generated file.
:raise FastFileExistsError: if overwrite==False and xdsm_file_path already exists
"""
if not xdsm_file_path:
xdsm_file_path = pth.join(pth.dirname(configuration_file_path),
"xdsm.html")
xdsm_file_path = pth.abspath(xdsm_file_path)
if not overwrite and pth.exists(xdsm_file_path):
raise FastFileExistsError(
"XDSM-diagram file %s not written because it already exists. "
"Use overwrite=True to bypass." % xdsm_file_path,
xdsm_file_path,
)
make_parent_dir(xdsm_file_path)
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem()
problem.setup()
problem.final_setup()
fastoad.openmdao.whatsopt.write_xdsm(problem, xdsm_file_path, depth,
wop_server_url, dry_run)
return xdsm_file_path
def write_n2(configuration_file_path: str,
n2_file_path: str = None,
overwrite: bool = False):
"""
Write the N2 diagram of the problem in file n2.html
:param configuration_file_path:
:param n2_file_path: if None, will default to `n2.html`
:param overwrite:
:return: path of generated file.
:raise FastFileExistsError: if overwrite==False and n2_file_path already exists
"""
if not n2_file_path:
n2_file_path = "n2.html"
n2_file_path = pth.abspath(n2_file_path)
if not overwrite and pth.exists(n2_file_path):
raise FastFileExistsError(
"N2-diagram file %s not written because it already exists. "
"Use overwrite=True to bypass." % n2_file_path,
n2_file_path,
)
make_parent_dir(n2_file_path)
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem()
problem.setup()
problem.final_setup()
om.n2(problem, outfile=n2_file_path, show_browser=False)
if InteractiveShell.initialized():
clear_output()
_LOGGER.info("N2 diagram written in %s", pth.abspath(n2_file_path))
return n2_file_path
def write_xdsm(
configuration_file_path: str,
xdsm_file_path: str = None,
overwrite: bool = False,
depth: int = 2,
wop_server_url=None,
api_key=None,
):
"""
:param configuration_file_path:
:param xdsm_file_path:
:param overwrite:
:param depth:
:param wop_server_url:
:param api_key:
:return:
"""
if not xdsm_file_path:
xdsm_file_path = pth.join(pth.dirname(configuration_file_path), "xdsm.html")
xdsm_file_path = pth.abspath(xdsm_file_path)
if not overwrite and pth.exists(xdsm_file_path):
raise FastFileExistsError(
"XDSM-diagram file %s not written because it already exists. "
"Use overwrite=True to bypass." % xdsm_file_path,
xdsm_file_path,
)
make_parent_dir(xdsm_file_path)
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem()
problem.setup()
problem.final_setup()
wop = WhatsOpt(url=wop_server_url, login=False)
try:
ok = wop.login(api_key=api_key, echo=False)
except requests.exceptions.ConnectionError:
if not wop_server_url and wop.url == PROD_URL:
used_url = wop.url
# If connection failed while attempting to reach the wop default URL,
# that is the internal ONERA server, try with the external server
try:
wop = WhatsOpt(url=DEFAULT_WOP_URL)
ok = wop.login(api_key=api_key, echo=False)
except requests.exceptions.ConnectionError:
_LOGGER.warning("Failed to connect to %s and %s", used_url, DEFAULT_WOP_URL)
return
else:
_LOGGER.warning("Failed to connect to %s", wop.url)
return
if ok:
xdsm = wop.push_mda(
problem, {"--xdsm": True, "--name": None, "--dry-run": False, "--depth": depth}
)
generate_xdsm_html(xdsm, xdsm_file_path)
else:
wop.logout()
_LOGGER.warning("Could not login to %s", wop.url)
def list_modules(
configuration_file_path: str = None,
out: Union[IO, str] = None,
overwrite: bool = False,
verbose: bool = False,
force_text_output: bool = False,
):
"""
Writes list of available systems.
If configuration_file_path is given and if it defines paths where there are registered systems,
they will be listed too.
:param configuration_file_path:
:param out: the output stream or a path for the output file (None means sys.stdout)
:param overwrite: if True and out is a file path, the file will be written even if one already
exists
:param verbose: if True, shows detailed information for each system
if False, shows only identifier and path of each system
:param force_text_output: if True, list will be written as text, even if command is used in an
interactive IPython shell (Jupyter notebook). Has no effect in other
shells or if out parameter is not sys.stdout
:raise FastFileExistsError: if overwrite==False and out is a file path and the file exists
"""
if out is None:
out = sys.stdout
if configuration_file_path:
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
conf.load(configuration_file_path)
# As the problem has been configured, BundleLoader now knows additional registered systems
if verbose:
cell_list = _get_detailed_system_list()
else:
cell_list = _get_simple_system_list()
if isinstance(out, str):
if not overwrite and pth.exists(out):
raise FastFileExistsError(
"File %s not written because it already exists. "
"Use overwrite=True to bypass." % out,
out,
)
make_parent_dir(out)
out_file = open(out, "w")
else:
if (
out == sys.stdout
and InteractiveShell.initialized()
and not force_text_output
and not verbose
):
display(HTML(tabulate(cell_list, tablefmt="html")))
return
out_file = out
out_file.write(tabulate(cell_list, tablefmt="grid"))
out_file.write("\n")
if isinstance(out, str):
out_file.close()
_LOGGER.info("System list written in %s", out_file)
def list_variables(
configuration_file_path: str,
out: Union[IO, str] = None,
overwrite: bool = False,
force_text_output: bool = False,
tablefmt: str = "grid",
):
"""
Writes list of variables for the :class:`FASTOADProblem` specified in configuration_file_path.
List is generally written as text. It can be displayed as a scrollable table view if:
- function is used in an interactive IPython shell
- out == sys.stdout
- force_text_output == False
:param configuration_file_path:
:param out: the output stream or a path for the output file (None means sys.stdout)
:param overwrite: if True and out parameter is a file path, the file will be written even if one
already exists
:param force_text_output: if True, list will be written as text, even if command is used in an
interactive IPython shell (Jupyter notebook). Has no effect in other
shells or if out parameter is not sys.stdout
:param tablefmt: The formatting of the requested table. Options are the same as those available
to the tabulate package. See tabulate.tabulate_formats for a complete list.
:raise FastFileExistsError: if overwrite==False and out parameter is a file path and the file
exists
"""
if out is None:
out = sys.stdout
conf = FASTOADProblemConfigurator(configuration_file_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
problem = conf.get_problem()
problem.setup()
# Extracting inputs and outputs
variables = VariableList.from_problem(problem)
variables.sort(key=lambda var: var.name)
input_variables = VariableList([var for var in variables if var.is_input])
output_variables = VariableList([var for var in variables if not var.is_input])
for var in input_variables:
var.metadata["I/O"] = "IN"
for var in output_variables:
var.metadata["I/O"] = "OUT"
variables_df = (
(input_variables + output_variables)
.to_dataframe()[["name", "I/O", "desc"]]
.rename(columns={"name": "NAME", "desc": "DESCRIPTION"})
)
if isinstance(out, str):
if not overwrite and pth.exists(out):
raise FastFileExistsError(
"File %s not written because it already exists. "
"Use overwrite=True to bypass." % out,
out,
)
make_parent_dir(out)
out_file = open(out, "w")
else:
if out == sys.stdout and InteractiveShell.initialized() and not force_text_output:
display(HTML(variables_df.to_html(index=False)))
return
# Here we continue with text output
out_file = out
# For a terminal output, we limit width of NAME column
variables_df["NAME"] = variables_df["NAME"].apply(lambda s: "\n".join(tw.wrap(s, 50)))
# In any case, let's break descriptions that are too long
variables_df["DESCRIPTION"] = variables_df["DESCRIPTION"].apply(
lambda s: "\n".join(tw.wrap(s, 100,))
)
out_file.write(
tabulate(variables_df, headers=variables_df.columns, showindex=False, tablefmt=tablefmt)
)
out_file.write("\n")
if isinstance(out, str):
out_file.close()
_LOGGER.info("Output list written in %s", out_file)
def list_modules(
source_path: Union[List[str], str] = None,
out: Union[IO, str] = None,
overwrite: bool = False,
verbose: bool = False,
force_text_output: bool = False,
):
"""
Writes list of available systems.
If source_path is given and if it defines paths where there are registered systems,
they will be listed too.
:param source_path: either a configuration file path, folder path, or list of folder path
:param out: the output stream or a path for the output file (None means sys.stdout)
:param overwrite: if True and out is a file path, the file will be written even if one already
exists
:param verbose: if True, shows detailed information for each system
if False, shows only identifier and path of each system
:param force_text_output: if True, list will be written as text, even if command is used in an
interactive IPython shell (Jupyter notebook). Has no effect in other
shells or if out parameter is not sys.stdout
:return: path of generated file, or None if no file was generated.
:raise FastFileExistsError: if `overwrite==False` and `out` is a file path and the file exists
"""
if out is None:
out = sys.stdout
if isinstance(source_path, str):
if pth.isfile(source_path):
conf = FASTOADProblemConfigurator(source_path)
conf._set_configuration_modifier(_PROBLEM_CONFIGURATOR)
# As the problem has been configured,
# BundleLoader now knows additional registered systems
elif pth.isdir(source_path):
RegisterOpenMDAOSystem.explore_folder(source_path)
else:
raise FileNotFoundError("Could not find %s" % source_path)
elif isinstance(source_path, Iterable):
for folder_path in source_path:
if not pth.isdir(folder_path):
_LOGGER.warning("SKIPPED %s: folder does not exist.",
folder_path)
else:
RegisterOpenMDAOSystem.explore_folder(folder_path)
elif source_path is not None:
raise RuntimeError("Unexpected type for source_path")
if verbose:
cell_list = _get_detailed_system_list()
else:
cell_list = _get_simple_system_list()
if isinstance(out, str):
out = pth.abspath(out)
if not overwrite and pth.exists(out):
raise FastFileExistsError(
"File %s not written because it already exists. "
"Use overwrite=True to bypass." % out,
out,
)
make_parent_dir(out)
out_file = open(out, "w")
else:
if (out == sys.stdout and InteractiveShell.initialized()
and not force_text_output and not verbose):
display(HTML(tabulate(cell_list, tablefmt="html")))
return None
out_file = out
out_file.write(tabulate(cell_list, tablefmt="grid"))
out_file.write("\n")
if isinstance(out, str):
out_file.close()
_LOGGER.info("System list written in %s", out)
return out
return None