def derive(self,
dest=P('Destination'),
afr_dest=A('AFR Destination Airport')):
'''
Requires an ASCII destination parameter recording either the airport's
ICAO or IATA code.
'''
if not dest or dest.array.dtype.type is not np.string_:
if afr_dest:
self.set_flight_attr(afr_dest.value)
return
value = most_common_value(dest.array, threshold=0.45)
if value is None or not value.isalpha():
return
handler = api.get_handler(settings.API_HANDLER)
try:
airport = handler.get_airport(value)
except api.NotFoundError:
self.warning('No destination airport found for %s.', value)
return
self.debug('Detected destination airport: %s', airport)
self.set_flight_attr(airport)
def get_aircraft_info(tail_number):
'''
Fetch aircraft info from configured API handler falling back to file handler if an exception is raised.
:param tail_number: aircraft tail number
:type tail_number: str
:returns: aircraft information dictionary
:rtype: dict
:raises: APIError -- if the aircraft is not found.
'''
handler = api.get_handler(settings.API_HANDLER)
try:
aircraft_info = handler.get_aircraft(tail_number)
except api.APIError:
if settings.API_HANDLER == settings.API_FILE_HANDLER:
raise
message = 'Aircraft information for aircraft %s not found via %s - falling back to %s.'
logger.warning(message, tail_number, settings.API_HANDLER, settings.API_FILE_HANDLER)
handler = api.get_handler(settings.API_FILE_HANDLER)
aircraft_info = handler.get_aircraft(tail_number)
logger.info('Using aircraft_info provided by %s: %s.', handler.__class__.__name__, aircraft_info)
return aircraft_info
def get_aircraft_info(tail_number):
'''
Fetch aircraft info from configured API handler falling back to file handler if an exception is raised.
:param tail_number: aircraft tail number
:type tail_number: str
:returns: aircraft information dictionary
:rtype: dict
:raises: APIError -- if the aircraft is not found.
'''
handler = api.get_handler(settings.API_HANDLER)
try:
aircraft_info = handler.get_aircraft(tail_number)
except api.APIError:
if settings.API_HANDLER == settings.API_FILE_HANDLER:
raise
message = 'Aircraft information for aircraft %s not found via %s - falling back to %s.'
logger.warning(message, tail_number, settings.API_HANDLER, settings.API_FILE_HANDLER)
handler = api.get_handler(settings.API_FILE_HANDLER)
aircraft_info = handler.get_aircraft(tail_number)
logger.info('Using aircraft_info provided by %s: %s.', handler.__class__.__name__, aircraft_info)
return aircraft_info
def lookup_airport(self, lat_source, lon_source):
lat = lat_source.get_first()
lon = lon_source.get_first()
if lat and lon:
handler = api.get_handler(settings.API_HANDLER)
try:
airport = handler.get_nearest_airport(lat.value, lon.value)
except api.NotFoundError:
msg = 'No takeoff airport found near coordinates (%f, %f).'
self.warning(msg, lat.value, lon.value)
# No airport was found, so fall through and try AFR.
else:
codes = airport.get('code', {})
code = codes.get('icao') or codes.get('iata')or codes.get('faa') or 'Unknown'
self.info('Detected takeoff airport: %s from coordinates (%f, %f)', code, lat.value, lon.value)
self.set_flight_attr(airport)
return True # We found an airport, so finish here.
else:
self.warning('No coordinates for looking up takeoff airport.')
def lookup_airport(self, lat_source, lon_source):
lat = lat_source.get_first()
lon = lon_source.get_first()
if lat and lon:
handler = api.get_handler(settings.API_HANDLER)
try:
airport = handler.get_nearest_airport(lat.value, lon.value)
except api.NotFoundError:
msg = 'No takeoff airport found near coordinates (%f, %f).'
self.warning(msg, lat.value, lon.value)
# No airport was found, so fall through and try AFR.
else:
codes = airport.get('code', {})
code = codes.get('icao') or codes.get('iata')or codes.get('faa') or 'Unknown'
self.info('Detected takeoff airport: %s from coordinates (%f, %f)', code, lat.value, lon.value)
self.set_flight_attr(airport)
return True # We found an airport, so finish here.
else:
self.warning('No coordinates for looking up takeoff airport.')
def derive(self,
land_lat=KPV('Latitude At Touchdown'),
land_lon=KPV('Longitude At Touchdown'),
land_afr_apt=A('AFR Landing Airport')):
'''
'''
# 1. If we have latitude and longitude, look for the nearest airport:
if land_lat and land_lon:
lat = land_lat.get_last()
lon = land_lon.get_last()
if lat and lon:
handler = api.get_handler(settings.API_HANDLER)
try:
airport = handler.get_nearest_airport(lat.value, lon.value)
except api.NotFoundError:
msg = 'No landing airport found near coordinates (%f, %f).'
self.warning(msg, lat.value, lon.value)
# No airport was found, so fall through and try AFR.
else:
codes = airport.get('code', {})
code = codes.get('icao') or codes.get('iata')or codes.get('faa') or 'Unknown'
self.info('Detected landing airport: %s from coordinates (%f, %f)', code, lat.value, lon.value)
self.set_flight_attr(airport)
return # We found an airport, so finish here.
else:
self.warning('No coordinates for looking up landing airport.')
# No suitable coordinates, so fall through and try AFR.
# 2. If we have an airport provided in achieved flight record, use it:
if land_afr_apt:
airport = land_afr_apt.value
self.debug('Using landing airport from AFR: %s', airport)
self.set_flight_attr(airport)
return # We found an airport in the AFR, so finish here.
# 3. After all that, we still couldn't determine an airport...
self.error('Unable to determine airport at landing!')
self.set_flight_attr(None)
def derive(self, dest=P('Destination'),
afr_dest=A('AFR Destination Airport')):
'''
Requires an ASCII destination parameter recording either the airport's
ICAO or IATA code.
'''
if not dest or dest.array.dtype.type is not np.string_:
if afr_dest:
self.set_flight_attr(afr_dest.value)
return
value = most_common_value(dest.array, threshold=0.45)
if value is None or not value.isalpha():
return
handler = api.get_handler(settings.API_HANDLER)
try:
airport = handler.get_airport(value)
except api.NotFoundError:
self.warning('No destination airport found for %s.', value)
return
self.debug('Detected destination airport: %s', airport)
self.set_flight_attr(airport)
def _lookup_airport_and_runway(self, _slice, precise, lowest_lat,
lowest_lon, lowest_hdg, appr_ils_freq,
land_afr_apt=None, land_afr_rwy=None,
hint='approach'):
handler = api.get_handler(settings.API_HANDLER)
kwargs = {}
airport, runway = None, None
# A1. If we have latitude and longitude, look for the nearest airport:
if lowest_lat is not None and lowest_lon is not None:
kwargs.update(latitude=lowest_lat, longitude=lowest_lon)
try:
airport = handler.get_nearest_airport(**kwargs)
except api.NotFoundError:
msg = 'No approach airport found near coordinates (%f, %f).'
self.warning(msg, lowest_lat, lowest_lon)
# No airport was found, so fall through and try AFR.
else:
self.debug('Detected approach airport: %s', airport)
else:
# No suitable coordinates, so fall through and try AFR.
self.warning('No coordinates for looking up approach airport.')
# return None, None
# A2. If and we have an airport in achieved flight record, use it:
# NOTE: AFR data is only provided if this approach is a landing.
if not airport and land_afr_apt:
airport = handler.get_airport(land_afr_apt.value['id'])
self.debug('Using approach airport from AFR: %s', airport['name'])
# A3. After all that, we still couldn't determine an airport...
if not airport:
self.error('Unable to determine airport on approach!')
return None, None
if lowest_hdg is not None:
# R1. If we have airport and heading, look for the nearest runway:
if appr_ils_freq:
kwargs['ilsfreq'] = appr_ils_freq
# We already have latitude and longitude in kwargs from looking up
# the airport. If the measurments are not precise, remove them.
if not precise:
kwargs['hint'] = hint
runway = nearest_runway(airport, lowest_hdg, **kwargs)
if not runway:
msg = 'No runway found for airport #%d @ %03.1f deg with %s.'
self.warning(msg, airport['id'], lowest_hdg, kwargs)
# No runway was found, so fall through and try AFR.
if 'ilsfreq' in kwargs:
# This is a trap for airports where the ILS data is not
# available, but the aircraft approached with the ILS
# tuned. A good prompt for an omission in the database.
self.warning('Fix database? No runway but ILS was tuned.')
else:
self.debug('Detected approach runway: %s', runway)
# R2. If we have a runway provided in achieved flight record, use it:
if not runway and land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
# R3. After all that, we still couldn't determine a runway...
if not runway:
self.error('Unable to determine runway on approach!')
return airport, runway
def setUp(self):
self.handler = api.get_handler(settings.API_FILE_HANDLER)
with open(settings.API_FILE_PATHS['airports'], 'rb') as f:
self.airports = yaml.load(f)
def _lookup_airport_and_runway(self,
_slice,
precise,
lowest_lat,
lowest_lon,
lowest_hdg,
appr_ils_freq,
land_afr_apt=None,
land_afr_rwy=None,
hint='approach',
ac_type=aeroplane):
handler = api.get_handler(settings.API_HANDLER)
kwargs = {}
airport, runway, match = None, None, None
# A1. If we have latitude and longitude, look for the nearest airport:
if lowest_lat not in (None, np.ma.masked) and lowest_lon not in (
None, np.ma.masked):
kwargs.update(latitude=lowest_lat, longitude=lowest_lon)
try:
airports = handler.get_nearest_airport(**kwargs)
except (ValueError, TypeError):
self.warning('No coordinates for looking up approach airport.')
except api.NotFoundError:
msg = 'No approach airport found near coordinates (%f, %f).'
self.warning(msg, lowest_lat, lowest_lon)
# No airport was found, so fall through and try AFR.
else:
airport_info = self._evaluate_airports(airports, lowest_lat,
lowest_lon, lowest_hdg,
appr_ils_freq)
if land_afr_apt and land_afr_apt.value['id'] in airport_info:
# use afr airprot
match = airport_info[land_afr_apt.value['id']]
elif land_afr_apt and precise and ac_type != helicopter:
# raise error as afr and flight data do not match
msg = "'%s' provided by AFR is not in list of aiports within range of %s, %s. Aircraft has precise positioning"\
% (land_afr_apt.value['code'], lowest_lat, lowest_lon)
raise AFRMissmatchError(self.name, msg)
elif not land_afr_apt and precise:
# filter by runway coordinates
filtered = [
x for x in airport_info.values()
if x['min_rwy_start_dist'] is not None
]
if filtered:
match = min(filtered,
key=itemgetter('min_rwy_start_dist'))
else:
# filter by runway heading
airport = None
potential_airports = [
x for x in airport_info.values() if x['heading_match']
]
if appr_ils_freq:
# filter by ils frequency
ils_airports = [
x for x in airport_info.values() if x['ils_match']
]
if len(ils_airports) == 1:
potential_airports = [ils_airports[0]]
elif len(ils_airports) > 1:
potential_airports = ils_airports
if len(potential_airports) == 1:
match = potential_airports[0]
elif len(potential_airports) > 1:
# filter by runway distances
filtered = [
x for x in potential_airports
if x['min_rwy_start_dist'] is not None
]
if filtered:
match = min(filtered,
key=itemgetter('min_rwy_start_dist'))
else:
# filter by airport distances
if airports:
airport = min(airports, key=itemgetter('distance'))
if match:
airport = match['airport']
if airport:
self.debug('Detected approach airport: %s', airport)
else:
self.warning(
'Unable to locate Airport from provided coordinates')
else:
# No suitable coordinates, so fall through and try AFR.
self.warning('No coordinates for looking up approach airport.')
# return None, None
# A2. If and we have an airport in achieved flight record, use it:
# NOTE: AFR data is only provided if this approach is a landing.
if not airport and land_afr_apt:
airport = handler.get_airport(land_afr_apt.value['id'])
self.debug('Using approach airport from AFR: %s', airport['name'])
# A3. After all that, we still couldn't determine an airport...
if not airport:
self.error('Unable to determine airport on approach!')
return None, None
if lowest_hdg is not None:
# R1. If we have airport and heading, look for the nearest runway:
if appr_ils_freq:
kwargs['ilsfreq'] = appr_ils_freq
# We already have latitude and longitude in kwargs from looking up
# the airport. If the measurments are not precise, remove them.
if not precise:
kwargs['hint'] = hint
runway = nearest_runway(airport, lowest_hdg, **kwargs)
if not runway:
msg = 'No runway found for airport #%d @ %03.1f deg with %s.'
self.warning(msg, airport['id'], lowest_hdg, kwargs)
# No runway was found, so fall through and try AFR.
if 'ilsfreq' in kwargs:
# This is a trap for airports where the ILS data is not
# available, but the aircraft approached with the ILS
# tuned. A good prompt for an omission in the database.
self.warning('Fix database? No runway but ILS was tuned.')
else:
self.debug('Detected approach runway: %s', runway)
# R2. If we have a runway provided in achieved flight record, use it:
if not runway and land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
# R3. After all that, we still couldn't determine a runway...
if not runway:
self.error('Unable to determine runway on approach!')
return airport, runway
def setUp(self):
self.handler = api.get_handler(settings.API_FILE_HANDLER)
with open(settings.API_FILE_PATHS['airports'], 'rb') as f:
self.airports = yaml.load(f, Loader=yaml.FullLoader)
def setUp(self):
self.handler = api.get_handler(settings.API_HTTP_HANDLER)
def _lookup_airport_and_runway(self, _slice, precise, lowest_lat,
lowest_lon, lowest_hdg, appr_ils_freq,
land_afr_apt=None, land_afr_rwy=None,
hint='approach', ac_type=aeroplane):
handler = api.get_handler(settings.API_HANDLER)
kwargs = {}
airport, runway, match = None, None, None
# A1. If we have latitude and longitude, look for the nearest airport:
if lowest_lat not in (None, np.ma.masked) and lowest_lon not in (None, np.ma.masked):
kwargs.update(latitude=lowest_lat, longitude=lowest_lon)
try:
airports = handler.get_nearest_airport(**kwargs)
except (ValueError, TypeError):
self.warning('No coordinates for looking up approach airport.')
except api.NotFoundError:
msg = 'No approach airport found near coordinates (%f, %f).'
self.warning(msg, lowest_lat, lowest_lon)
# No airport was found, so fall through and try AFR.
else:
airport_info = self._evaluate_airports(airports, lowest_lat, lowest_lon, lowest_hdg, appr_ils_freq)
if land_afr_apt and land_afr_apt.value['id'] in airport_info:
# use afr airprot
match = airport_info[land_afr_apt.value['id']]
elif land_afr_apt and precise and ac_type != helicopter:
# raise error as afr and flight data do not match
msg = "'%s' provided by AFR is not in list of aiports within range of %s, %s. Aircraft has precise positioning"\
% (land_afr_apt.value['code'], lowest_lat, lowest_lon)
raise AFRMissmatchError(self.name, msg)
elif not land_afr_apt and precise:
# filter by runway coordinates
filtered = [x for x in airport_info.values() if x['min_rwy_start_dist'] is not None]
if filtered:
match = min(filtered, key=itemgetter('min_rwy_start_dist'))
else:
# filter by runway heading
airport = None
potential_airports = [x for x in airport_info.values() if x['heading_match']]
if appr_ils_freq:
# filter by ils frequency
ils_airports = [x for x in airport_info.values() if x['ils_match']]
if len(ils_airports) == 1:
potential_airports = [ils_airports[0]]
elif len(ils_airports) > 1:
potential_airports = ils_airports
if len(potential_airports) == 1:
match = potential_airports[0]
elif len(potential_airports) > 1:
# filter by runway distances
filtered = [x for x in potential_airports if x['min_rwy_start_dist'] is not None]
if filtered:
match = min(filtered, key=itemgetter('min_rwy_start_dist'))
else:
# filter by airport distances
if airports:
airport = min(airports, key=itemgetter('distance'))
if match:
airport = match['airport']
if airport:
self.debug('Detected approach airport: %s', airport)
else:
self.warning('Unable to locate Airport from provided coordinates')
else:
# No suitable coordinates, so fall through and try AFR.
self.warning('No coordinates for looking up approach airport.')
# return None, None
# A2. If and we have an airport in achieved flight record, use it:
# NOTE: AFR data is only provided if this approach is a landing.
if not airport and land_afr_apt:
airport = handler.get_airport(land_afr_apt.value['id'])
self.debug('Using approach airport from AFR: %s', airport['name'])
# A3. After all that, we still couldn't determine an airport...
if not airport:
self.error('Unable to determine airport on approach!')
return None, None
if lowest_hdg is not None:
# R1. If we have airport and heading, look for the nearest runway:
if appr_ils_freq:
kwargs['ilsfreq'] = appr_ils_freq
# We already have latitude and longitude in kwargs from looking up
# the airport. If the measurments are not precise, remove them.
if not precise:
kwargs['hint'] = hint
runway = nearest_runway(airport, lowest_hdg, **kwargs)
if not runway:
msg = 'No runway found for airport #%d @ %03.1f deg with %s.'
self.warning(msg, airport['id'], lowest_hdg, kwargs)
# No runway was found, so fall through and try AFR.
if 'ilsfreq' in kwargs:
# This is a trap for airports where the ILS data is not
# available, but the aircraft approached with the ILS
# tuned. A good prompt for an omission in the database.
self.warning('Fix database? No runway but ILS was tuned.')
else:
self.debug('Detected approach runway: %s', runway)
# R2. If we have a runway provided in achieved flight record, use it:
if not runway and land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
# R3. After all that, we still couldn't determine a runway...
if not runway:
self.error('Unable to determine runway on approach!')
return airport, runway
def _lookup_airport_and_runway(self,
_slice,
precise,
lowest_lat,
lowest_lon,
lowest_hdg,
appr_ils_freq,
land_afr_apt=None,
land_afr_rwy=None,
hint='approach'):
handler = api.get_handler(settings.API_HANDLER)
kwargs = {}
airport, runway = None, None
# A1. If we have latitude and longitude, look for the nearest airport:
if lowest_lat is not None and lowest_lon is not None:
kwargs.update(latitude=lowest_lat, longitude=lowest_lon)
try:
airport = handler.get_nearest_airport(**kwargs)
except api.NotFoundError:
msg = 'No approach airport found near coordinates (%f, %f).'
self.warning(msg, lowest_lat, lowest_lon)
# No airport was found, so fall through and try AFR.
else:
self.debug('Detected approach airport: %s', airport)
else:
# No suitable coordinates, so fall through and try AFR.
self.warning('No coordinates for looking up approach airport.')
return None, None
# A2. If and we have an airport in achieved flight record, use it:
# NOTE: AFR data is only provided if this approach is a landing.
if not airport and land_afr_apt:
airport = land_afr_apt.value
self.debug('Using approach airport from AFR: %s', airport)
# A3. After all that, we still couldn't determine an airport...
if not airport:
self.error('Unable to determine airport on approach!')
return None, None
if lowest_hdg is not None:
# R1. If we have airport and heading, look for the nearest runway:
if appr_ils_freq:
kwargs['ilsfreq'] = appr_ils_freq
# We already have latitude and longitude in kwargs from looking up
# the airport. If the measurments are not precise, remove them.
if not precise:
kwargs['hint'] = hint
del kwargs['latitude']
del kwargs['longitude']
runway = nearest_runway(airport, lowest_hdg, **kwargs)
if not runway:
msg = 'No runway found for airport #%d @ %03.1f deg with %s.'
self.warning(msg, airport['id'], lowest_hdg, kwargs)
# No runway was found, so fall through and try AFR.
if 'ilsfreq' in kwargs:
# This is a trap for airports where the ILS data is not
# available, but the aircraft approached with the ILS
# tuned. A good prompt for an omission in the database.
self.warning('Fix database? No runway but ILS was tuned.')
else:
self.debug('Detected approach runway: %s', runway)
# R2. If we have a runway provided in achieved flight record, use it:
if not runway and land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
# R3. After all that, we still couldn't determine a runway...
if not runway:
self.error('Unable to determine runway on approach!')
return airport, runway
def setUp(self):
self.handler = api.get_handler(settings.API_HTTP_HANDLER)
def _find_nearest_airport(self, precise, lowest_lat, lowest_lon,
lowest_hdg, appr_ils_freq, ac_type,
land_afr_apt):
'''
Find the nearest airport from lowest lat and lon.
Returns None if no suitable airport found.
'''
handler = api.get_handler(settings.API_HANDLER)
airport, match = None, None
if lowest_lat in (None, np.ma.masked) or lowest_lon in (None,
np.ma.masked):
self.warning('No coordinates for looking up approach airport.')
return
try:
airports = handler.get_nearest_airport(latitude=lowest_lat,
longitude=lowest_lon)
except (ValueError, TypeError):
self.warning('No coordinates for looking up approach airport.')
return
except api.NotFoundError:
msg = 'No approach airport found near coordinates (%f, %f).'
self.warning(msg, lowest_lat, lowest_lon)
return
airport_info = self._evaluate_airports(airports, lowest_lat,
lowest_lon, lowest_hdg,
appr_ils_freq)
if land_afr_apt and land_afr_apt.value['id'] in airport_info:
match = airport_info[land_afr_apt.value['id']]
elif land_afr_apt and precise and ac_type != helicopter:
# raise error as afr and flight data do not match
msg = "'%s' provided by AFR is not in list of aiports within range of %s, %s. Aircraft has precise positioning"\
% (land_afr_apt.value['code'], lowest_lat, lowest_lon)
raise AFRMissmatchError(self.name, msg)
elif precise:
if ac_type != helicopter:
# filter by runway coordinates
filtered = [
x for x in airport_info.values()
if x['min_rwy_start_dist'] is not None
]
match = min(filtered,
key=itemgetter('min_rwy_start_dist'),
default=None)
else:
# Helicopter can arrive with any heading. Filter by airport distance.
match = min(airport_info.values(),
key=itemgetter('distance'),
default=None)
else:
# Non-precise
# filter by runway heading
potential_airports = [
x for x in airport_info.values() if x['heading_match']
]
if appr_ils_freq:
# filter by ils frequency
ils_airports = [
x for x in airport_info.values() if x['ils_match']
]
if ils_airports:
potential_airports = ils_airports
if len(potential_airports) == 1:
match = potential_airports[0]
elif len(potential_airports) > 1:
# filter by runway distances
filtered = [
x for x in potential_airports
if x['min_rwy_start_dist'] is not None
]
match = min(filtered,
key=itemgetter('min_rwy_start_dist'),
default=None)
else:
# filter by airport distances
if airports:
airport = min(airports, key=itemgetter('distance'))
if match:
airport = match['airport']
if airport:
self.debug('Detected approach airport: %s', airport)
else:
self.warning('Unable to locate Airport from provided coordinates')
return airport
def _lookup_airport_and_runway(self,
_slice,
precise,
lowest_lat,
lowest_lon,
final_lat,
final_lon,
lowest_hdg,
appr_ils_freq,
land_afr_apt=None,
land_afr_rwy=None,
hint='approach',
ac_type=aeroplane):
'''
Determine the Airport and Runway.
For the airport:
1. Find the nearest airport to the coordinates at landing with precise positioning.
2. Use the airport data provided in the achieved flight record if the aircraft
does not have precise positioning.
3. Find the nearest airport to the coordinates at landing without precise
positioning.
4. Use the airport data provided in the achieved flight record as a fallback.
For the runway:
1. Use the runway data provided in the achieved flight record if available and
the aircraft does not have precise positioning.
2. Using airport, heading and coordinates at landing.
3. Use the runway data provided in the achieved flight record if heading is
missing or the runway failed to derive.
'''
airport = self._find_nearest_airport(precise, lowest_lat, lowest_lon,
lowest_hdg, appr_ils_freq,
ac_type, land_afr_apt)
handler = api.get_handler(settings.API_HANDLER)
if airport:
if not precise and land_afr_apt:
# Favour AFR for non-precise aircrafts
airport = handler.get_airport(land_afr_apt.value['id'])
self.debug('Using approach airport from AFR: %s',
airport['name'])
else:
if land_afr_apt:
airport = handler.get_airport(land_afr_apt.value['id'])
self.debug('Using approach airport from AFR: %s',
airport['name'])
else:
self.error('Unable to determine airport on approach!')
return None, None
# Determine RWY
runway = None
if lowest_hdg is not None:
runway = nearest_runway(
airport,
lowest_hdg,
latitude=final_lat if final_lat is not None else lowest_lat,
longitude=final_lon if final_lon is not None else lowest_lon,
ilsfreq=appr_ils_freq,
hint=hint if not precise else None)
if not runway:
msg = (
'No runway found for airport #%d @ %03.1f deg with latitude %s, '
'longitude %s, ilsfreq %s and hint %s.')
self.warning(msg, airport['id'], lowest_hdg, lowest_lat,
lowest_lon, appr_ils_freq,
hint if not precise else None)
if appr_ils_freq:
# This is a trap for airports where the ILS data is not
# available, but the aircraft approached with the ILS
# tuned. A good prompt for an omission in the database.
self.warning('Fix database? No runway but ILS was tuned.')
# No runway was found, so fall through and try AFR.
if land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
else:
self.debug('Detected approach runway: %s', runway)
if not precise:
# Favour AFR RWY info if available
if land_afr_rwy:
runway = land_afr_rwy.value
self.debug('Using approach runway from AFR: %s', runway)
if not runway:
self.error('Unable to determine runway on approach!')
return airport, runway
