def get_trt(in_meta, in_file=None):
"""
Calculate the *total readout time* for an input
:abbr:`EPI (echo-planar imaging)` scan.
There are several procedures to calculate the total
readout time. The basic one is that a ``TotalReadoutTime``
field is set in the JSON sidecar. The following examples
use an ``'epi.nii.gz'`` file-stub which has 90 pixels in the
j-axis encoding direction.
>>> meta = {'TotalReadoutTime': 0.02596}
>>> get_trt(meta)
0.02596
If the *effective echo spacing* :math:`t_\\text{ees}`
(``EffectiveEchoSpacing`` BIDS field) is provided, then the
total readout time can be calculated reading the number
of voxels along the readout direction :math:`T_\\text{ro}`
and the parallel acceleration factor of the EPI :math:`f_\\text{acc}`.
.. math ::
T_\\text{ro} = t_\\text{ees} \\, (N_\\text{PE} / f_\\text{acc} - 1)
>>> meta = {'EffectiveEchoSpacing': 0.00059,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_trt(meta, in_file='epi.nii.gz')
0.02596
Some vendors, like Philips, store different parameter names:
>>> meta = {'WaterFatShift': 8.129,
... 'MagneticFieldStrength': 3,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_trt(meta, in_file='epi.nii.gz')
0.018721183563864822
"""
# Use case 1: TRT is defined
trt = in_meta.get('TotalReadoutTime', None)
if trt is not None:
return trt
# All other cases require the parallel acc and npe (N vox in PE dir)
acc = float(in_meta.get('ParallelReductionFactorInPlane', 1.0))
npe = nb.load(in_file).shape[_get_pe_index(in_meta)]
etl = npe // acc
# Use case 2: TRT is defined
ees = in_meta.get('EffectiveEchoSpacing', None)
if ees is not None:
return ees * (etl - 1)
# Use case 3 (philips scans)
wfs = in_meta.get('WaterFatShift', None)
if wfs is not None:
fstrength = in_meta['MagneticFieldStrength']
wfd_ppm = 3.4 # water-fat diff in ppm
g_ratio_mhz_t = 42.57 # gyromagnetic ratio for proton (1H) in MHz/T
wfs_hz = fstrength * wfd_ppm * g_ratio_mhz_t
return wfs / wfs_hz
raise ValueError('Unknown total-readout time specification')
def get_trt(in_meta, in_file=None):
"""
Calculate the *total readout time* for an input
:abbr:`EPI (echo-planar imaging)` scan.
There are several procedures to calculate the total
readout time. The basic one is that a ``TotalReadoutTime``
field is set in the JSON sidecar. The following examples
use an ``'epi.nii.gz'`` file-stub which has 90 pixels in the
j-axis encoding direction.
>>> meta = {'TotalReadoutTime': 0.02596}
>>> get_trt(meta)
0.02596
If the *effective echo spacing* :math:`t_\\text{ees}`
(``EffectiveEchoSpacing`` BIDS field) is provided, then the
total readout time can be calculated reading the number
of voxels along the readout direction :math:`T_\\text{ro}`
and the parallel acceleration factor of the EPI :math:`f_\\text{acc}`.
.. math ::
T_\\text{ro} = t_\\text{ees} \\, (N_\\text{PE} / f_\\text{acc} - 1)
>>> meta = {'EffectiveEchoSpacing': 0.00059,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_trt(meta, in_file='epi.nii.gz')
0.02596
Some vendors, like Philips, store different parameter names:
>>> meta = {'WaterFatShift': 8.129,
... 'MagneticFieldStrength': 3,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_trt(meta, in_file='epi.nii.gz')
0.018721183563864822
"""
# Use case 1: TRT is defined
trt = in_meta.get('TotalReadoutTime', None)
if trt is not None:
return trt
# All other cases require the parallel acc and npe (N vox in PE dir)
acc = float(in_meta.get('ParallelReductionFactorInPlane', 1.0))
npe = nb.load(in_file).shape[_get_pe_index(in_meta)]
etl = npe // acc
# Use case 2: TRT is defined
ees = in_meta.get('EffectiveEchoSpacing', None)
if ees is not None:
return ees * (etl - 1)
# Use case 3 (philips scans)
wfs = in_meta.get('WaterFatShift', None)
if wfs is not None:
fstrength = in_meta['MagneticFieldStrength']
wfd_ppm = 3.4 # water-fat diff in ppm
g_ratio_mhz_t = 42.57 # gyromagnetic ratio for proton (1H) in MHz/T
wfs_hz = fstrength * wfd_ppm * g_ratio_mhz_t
return wfs / wfs_hz
raise ValueError('Unknown total-readout time specification')
def get_ees(in_meta, in_file=None):
"""
Calculate the *effective echo spacing* :math:`t_\\text{ees}`
for an input :abbr:`EPI (echo-planar imaging)` scan.
There are several procedures to calculate the effective
echo spacing. The basic one is that an ``EffectiveEchoSpacing``
field is set in the JSON sidecar. The following examples
use an ``'epi.nii.gz'`` file-stub which has 90 pixels in the
j-axis encoding direction.
>>> meta = {'EffectiveEchoSpacing': 0.00059,
... 'PhaseEncodingDirection': 'j-'}
>>> get_ees(meta)
0.00059
If the *total readout time* :math:`T_\\text{ro}` (``TotalReadoutTime``
BIDS field) is provided, then the effective echo spacing can be
calculated reading the number of voxels :math:`N_\\text{PE}` along the
readout direction and the parallel acceleration
factor of the EPI
.. math ::
= T_\\text{ro} \\, (N_\\text{PE} / f_\\text{acc} - 1)^{-1}
where :math:`N_y` is the number of pixels along the phase-encoding direction
:math:`y`, and :math:`f_\\text{acc}` is the parallel imaging acceleration factor
(:abbr:`GRAPPA (GeneRalized Autocalibrating Partial Parallel Acquisition)`,
:abbr:`ARC (Autocalibrating Reconstruction for Cartesian imaging)`, etc.).
>>> meta = {'TotalReadoutTime': 0.02596,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_ees(meta, in_file='epi.nii.gz')
0.00059
Some vendors, like Philips, store different parameter names
(see http://dbic.dartmouth.edu/pipermail/mrusers/attachments/\
20141112/eb1d20e6/attachment.pdf):
>>> meta = {'WaterFatShift': 8.129,
... 'MagneticFieldStrength': 3,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_ees(meta, in_file='epi.nii.gz')
0.00041602630141921826
"""
import nibabel as nb
from fmriprep.interfaces.fmap import _get_pe_index
# Use case 1: EES is defined
ees = in_meta.get('EffectiveEchoSpacing', None)
if ees is not None:
return ees
# All other cases require the parallel acc and npe (N vox in PE dir)
acc = float(in_meta.get('ParallelReductionFactorInPlane', 1.0))
npe = nb.load(in_file).shape[_get_pe_index(in_meta)]
etl = npe // acc
# Use case 2: TRT is defined
trt = in_meta.get('TotalReadoutTime', None)
if trt is not None:
return trt / (etl - 1)
# Use case 3 (philips scans)
wfs = in_meta.get('WaterFatShift', None)
if wfs is not None:
fstrength = in_meta['MagneticFieldStrength']
wfd_ppm = 3.4 # water-fat diff in ppm
g_ratio_mhz_t = 42.57 # gyromagnetic ratio for proton (1H) in MHz/T
wfs_hz = fstrength * wfd_ppm * g_ratio_mhz_t
return wfs / (wfs_hz * etl)
raise ValueError('Unknown effective echo-spacing specification')
def get_ees(in_meta, in_file=None):
"""
Calculate the *effective echo spacing* :math:`t_\\text{ees}`
for an input :abbr:`EPI (echo-planar imaging)` scan.
There are several procedures to calculate the effective
echo spacing. The basic one is that an ``EffectiveEchoSpacing``
field is set in the JSON sidecar. The following examples
use an ``'epi.nii.gz'`` file-stub which has 90 pixels in the
j-axis encoding direction.
>>> meta = {'EffectiveEchoSpacing': 0.00059,
... 'PhaseEncodingDirection': 'j-'}
>>> get_ees(meta)
0.00059
If the *total readout time* :math:`T_\\text{ro}` (``TotalReadoutTime``
BIDS field) is provided, then the effective echo spacing can be
calculated reading the number of voxels :math:`N_\\text{PE}` along the
readout direction and the parallel acceleration
factor of the EPI
.. math ::
= T_\\text{ro} \\, (N_\\text{PE} / f_\\text{acc} - 1)^{-1}
where :math:`N_y` is the number of pixels along the phase-encoding direction
:math:`y`, and :math:`f_\\text{acc}` is the parallel imaging acceleration factor
(:abbr:`GRAPPA (GeneRalized Autocalibrating Partial Parallel Acquisition)`,
:abbr:`ARC (Autocalibrating Reconstruction for Cartesian imaging)`, etc.).
>>> meta = {'TotalReadoutTime': 0.02596,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_ees(meta, in_file='epi.nii.gz')
0.00059
Some vendors, like Philips, store different parameter names
(see http://dbic.dartmouth.edu/pipermail/mrusers/attachments/\
20141112/eb1d20e6/attachment.pdf):
>>> meta = {'WaterFatShift': 8.129,
... 'MagneticFieldStrength': 3,
... 'PhaseEncodingDirection': 'j-',
... 'ParallelReductionFactorInPlane': 2}
>>> get_ees(meta, in_file='epi.nii.gz')
0.00041602630141921826
"""
import nibabel as nb
from fmriprep.interfaces.fmap import _get_pe_index
# Use case 1: EES is defined
ees = in_meta.get('EffectiveEchoSpacing', None)
if ees is not None:
return ees
# All other cases require the parallel acc and npe (N vox in PE dir)
acc = float(in_meta.get('ParallelReductionFactorInPlane', 1.0))
npe = nb.load(in_file).shape[_get_pe_index(in_meta)]
etl = npe // acc
# Use case 2: TRT is defined
trt = in_meta.get('TotalReadoutTime', None)
if trt is not None:
return trt / (etl - 1)
# Use case 3 (philips scans)
wfs = in_meta.get('WaterFatShift', None)
if wfs is not None:
fstrength = in_meta['MagneticFieldStrength']
wfd_ppm = 3.4 # water-fat diff in ppm
g_ratio_mhz_t = 42.57 # gyromagnetic ratio for proton (1H) in MHz/T
wfs_hz = fstrength * wfd_ppm * g_ratio_mhz_t
return wfs / (wfs_hz * etl)
raise ValueError('Unknown effective echo-spacing specification')