def open(self, path, flags):
"""
Open a file for reading/writing, and check permissions.
flags: As described in man 2 open (Linux Programmer's Manual).
ORing of several access flags, including one of os.O_RDONLY,
os.O_WRONLY or os.O_RDWR. All other flags are in os as well.
On success, *may* return an arbitrary Python object, which will be
used as the "fh" argument to all the file operation methods on the
file. Or, may just return None on success.
On failure, should return a negative errno code.
Should return -errno.EACCES if disallowed.
"""
with ewrap("open"):
mode = flag2mode(flags)
logging.debug("open: %s (flags %s) (mode %s)" %
(path, oct(flags), mode))
fh = os.fdopen(os.open("." + path, flags), flag2mode(flags))
if fh is None:
return -ENOENT
context = self.GetContext()
accessflags = flag2accessflag(flags)
#if not fh.stat.check_permission(context['uid'], context['gid'], accessflags):
if not os.access("." + path, accessflags):
return -EACCES
return fh
def open(self, path, flags):
"""
Open a file for reading/writing, and check permissions.
flags: As described in man 2 open (Linux Programmer's Manual).
ORing of several access flags, including one of os.O_RDONLY,
os.O_WRONLY or os.O_RDWR. All other flags are in os as well.
On success, *may* return an arbitrary Python object, which will be
used as the "fh" argument to all the file operation methods on the
file. Or, may just return None on success.
On failure, should return a negative errno code.
Should return -errno.EACCES if disallowed.
"""
with ewrap("open"):
mode = flag2mode(flags)
logging.debug("open: %s (flags %s) (mode %s)" % (path, oct(flags), mode))
fh = os.fdopen(os.open("." + path, flags), flag2mode(flags))
if fh is None:
return -ENOENT
context = self.GetContext()
accessflags = flag2accessflag(flags)
#if not fh.stat.check_permission(context['uid'], context['gid'], accessflags):
if not os.access("." + path, accessflags):
return -EACCES
return fh
def mknod(self, path, mode, rdev):
"""
Creates a non-directory file (or a device node).
mode: Unix file mode flags for the file being created.
rdev: Special properties for creation of character or block special
devices (I've never gotten this to work).
Always 0 for regular files or FIFO buffers.
"""
# Note: mode & 0770000 gives you the non-permission bits.
# Common ones:
# S_IFREG: 0100000 (A regular file)
# S_IFIFO: 010000 (A fifo buffer, created with mkfifo)
# Potential ones (I have never seen them):
# Note that these could be made by copying special devices or sockets
# or using mknod, but I've never gotten FUSE to pass such a request
# along.
# S_IFCHR: 020000 (A character special device, created with mknod)
# S_IFBLK: 060000 (A block special device, created with mknod)
# S_IFSOCK: 0140000 (A socket, created with mkfifo)
# Also note: You can use self.GetContext() to get a dictionary
# {'uid': ?, 'gid': ?}, which tells you the uid/gid of the user
# executing the current syscall. This should be handy when creating
# new files and directories, because they should be owned by this
# user/group.
with ewrap("mknod"):
logging.debug("mknod: %s (mode %s, rdev %s)" %
(path, oct(mode), rdev))
Xmp.mknod(self, path, mode, rdev)
def mknod(self, path, mode, rdev):
"""
Creates a non-directory file (or a device node).
mode: Unix file mode flags for the file being created.
rdev: Special properties for creation of character or block special
devices (I've never gotten this to work).
Always 0 for regular files or FIFO buffers.
"""
# Note: mode & 0770000 gives you the non-permission bits.
# Common ones:
# S_IFREG: 0100000 (A regular file)
# S_IFIFO: 010000 (A fifo buffer, created with mkfifo)
# Potential ones (I have never seen them):
# Note that these could be made by copying special devices or sockets
# or using mknod, but I've never gotten FUSE to pass such a request
# along.
# S_IFCHR: 020000 (A character special device, created with mknod)
# S_IFBLK: 060000 (A block special device, created with mknod)
# S_IFSOCK: 0140000 (A socket, created with mkfifo)
# Also note: You can use self.GetContext() to get a dictionary
# {'uid': ?, 'gid': ?}, which tells you the uid/gid of the user
# executing the current syscall. This should be handy when creating
# new files and directories, because they should be owned by this
# user/group.
with ewrap("mknod"):
logging.debug("mknod: %s (mode %s, rdev %s)" % (path, oct(mode), rdev))
Xmp.mknod(self, path, mode, rdev)
def fgetattr(self, path, fh=None):
"""
Retrieves information about a file (the "stat" of a file).
Same as Fuse.getattr, but may be given a file handle to an open file,
so it can use that instead of having to look up the path.
"""
with ewrap("fgetattr"):
logging.debug("fgetattr: %s (fh %s)" % (path, fh))
return os.fstat(fh.fileno())
def ftruncate(self, path, size, fh=None):
"""
Shrink or expand a file to a given size.
Same as Fuse.truncate, but may be given a file handle to an open file,
so it can use that instead of having to look up the path.
"""
with ewrap("ftruncate"):
logging.debug("ftruncate: %s (size %s, fh %s)" % (path, size, fh))
fh.truncate(size)
def link(self, target, name):
"""
Creates a hard link from name to target. Note that both paths are
relative to the mounted file system. Hard-links across systems are not
supported.
"""
with ewrap("link"):
logging.debug("link: target %s, name: %s" % (target, name))
Xmp.link(self, target, name)
def readlink(self, path):
"""
Get the target of a symlink.
Returns a bytestring with the contents of a symlink (its target).
May also return an int error code.
"""
with ewrap("readlink"):
logging.debug("readlink: %s" % path)
return Xmp.readlink(self, path)
def readlink(self, path):
"""
Get the target of a symlink.
Returns a bytestring with the contents of a symlink (its target).
May also return an int error code.
"""
with ewrap("readlink"):
logging.debug("readlink: %s" % path)
return Xmp.readlink(self, path)
def ftruncate(self, path, size, fh=None):
"""
Shrink or expand a file to a given size.
Same as Fuse.truncate, but may be given a file handle to an open file,
so it can use that instead of having to look up the path.
"""
with ewrap("ftruncate"):
logging.debug("ftruncate: %s (size %s, fh %s)" % (path, size, fh))
fh.truncate(size)
def link(self, target, name):
"""
Creates a hard link from name to target. Note that both paths are
relative to the mounted file system. Hard-links across systems are not
supported.
"""
with ewrap("link"):
logging.debug("link: target %s, name: %s" % (target, name))
Xmp.link(self, target, name)
def fgetattr(self, path, fh=None):
"""
Retrieves information about a file (the "stat" of a file).
Same as Fuse.getattr, but may be given a file handle to an open file,
so it can use that instead of having to look up the path.
"""
with ewrap("fgetattr"):
logging.debug("fgetattr: %s (fh %s)" % (path, fh))
return os.fstat(fh.fileno())
def utime(self, path, times):
"""
Sets the access and modification times on a file.
times: (atime, mtime) pair. Both ints, in seconds since epoch.
Deprecated in favour of utimens.
"""
with ewrap("utime"):
atime, mtime = times
logging.debug("utime: %s (atime %s, mtime %s)" % (path, atime, mtime))
Xmp.utime(self, path, times)
def utime(self, path, times):
"""
Sets the access and modification times on a file.
times: (atime, mtime) pair. Both ints, in seconds since epoch.
Deprecated in favour of utimens.
"""
with ewrap("utime"):
atime, mtime = times
logging.debug("utime: %s (atime %s, mtime %s)" %
(path, atime, mtime))
Xmp.utime(self, path, times)
def flush(self, path, fh=None):
"""
Flush cached data to the file system.
This is NOT an fsync (I think the difference is fsync goes both ways,
while flush is just one-way).
"""
with ewrap("flush"):
logging.debug("flush: %s (fh %s)" % (path, fh))
self._fflush(fh)
# cf. xmp_flush() in fusexmp_fh.c
os.close(os.dup(fh.fileno()))
def mkdir(self, path, mode):
"""
Creates a directory.
mode: Unix file mode flags for the directory being created.
"""
# Note: mode & 0770000 gives you the non-permission bits.
# Should be S_IDIR (040000); I guess you can assume this.
# Also see note about self.GetContext() in mknod.
with ewrap("mkdir"):
logging.debug("mkdir: %s (mode %s)" % (path, oct(mode)))
Xmp.mkdir(self, path, mode)
def flush(self, path, fh=None):
"""
Flush cached data to the file system.
This is NOT an fsync (I think the difference is fsync goes both ways,
while flush is just one-way).
"""
with ewrap("flush"):
logging.debug("flush: %s (fh %s)" % (path, fh))
self._fflush(fh)
# cf. xmp_flush() in fusexmp_fh.c
os.close(os.dup(fh.fileno()))
def mkdir(self, path, mode):
"""
Creates a directory.
mode: Unix file mode flags for the directory being created.
"""
# Note: mode & 0770000 gives you the non-permission bits.
# Should be S_IDIR (040000); I guess you can assume this.
# Also see note about self.GetContext() in mknod.
with ewrap("mkdir"):
logging.debug("mkdir: %s (mode %s)" % (path, oct(mode)))
Xmp.mkdir(self, path, mode)
def fsync(self, path, datasync, fh=None):
"""
Synchronises an open file.
datasync: If True, only flush user data, not metadata.
"""
with ewrap("fsync"):
logging.debug("fsync: %s (datasync %s, fh %s)" % (path, datasync, fh))
self._fflush(fh)
if datasync and hasattr(os, 'fdatasync'):
os.fdatasync(fh.fileno())
else:
os.fsync(fh.fileno())
def fsync(self, path, datasync, fh=None):
"""
Synchronises an open file.
datasync: If True, only flush user data, not metadata.
"""
with ewrap("fsync"):
logging.debug("fsync: %s (datasync %s, fh %s)" %
(path, datasync, fh))
self._fflush(fh)
if datasync and hasattr(os, 'fdatasync'):
os.fdatasync(fh.fileno())
else:
os.fsync(fh.fileno())
def rename(self, old, new):
"""
Moves a file from old to new. (old and new are both full paths, and
may not be in the same directory).
Note that both paths are relative to the mounted file system.
If the operating system needs to move files across systems, it will
manually copy and delete the file, and this method will not be called.
"""
with ewrap("rename"):
logging.debug("rename: target %s, name: %s" % (self.root + old, self.root + new))
Xmp.rename(self, old, new)
self.sha1db.updatePath(self.root + old, self.root + new)
def rename(self, old, new):
"""
Moves a file from old to new. (old and new are both full paths, and
may not be in the same directory).
Note that both paths are relative to the mounted file system.
If the operating system needs to move files across systems, it will
manually copy and delete the file, and this method will not be called.
"""
with ewrap("rename"):
logging.debug("rename: target %s, name: %s" %
(self.root + old, self.root + new))
Xmp.rename(self, old, new)
self.sha1db.updatePath(self.root + old, self.root + new)
def getattr(self, path):
"""
Retrieves information about a file (the "stat" of a file).
Returns a fuse.Stat object containing details about the file or
directory.
Returns -errno.ENOENT if the file is not found, or another negative
errno code if another error occurs.
"""
with ewrap("getattr"):
if os.path.exists("." + path):
logging.debug("getattr: %s" % path)
return Xmp.getattr(self, path)
else:
logging.debug("Skipping getattr for nonexistent path %s" % path)
return -ENOENT
def readdir(self, path, offset):
"""
Generator function. Produces a directory listing.
Yields individual fuse.Direntry objects, one per file in the
directory. Should always yield at least "." and "..".
Should yield nothing if the file is not a directory or does not exist.
(Does not need to raise an error).
offset: I don't know what this does, but I think it allows the OS to
request starting the listing partway through (which I clearly don't
yet support). Seems to always be 0 anyway.
"""
with ewrap("readdir"):
logging.debug("readdir: %s (offset %s)" % (path, offset))
return Xmp.readdir(self, path, offset)
def readdir(self, path, offset):
"""
Generator function. Produces a directory listing.
Yields individual fuse.Direntry objects, one per file in the
directory. Should always yield at least "." and "..".
Should yield nothing if the file is not a directory or does not exist.
(Does not need to raise an error).
offset: I don't know what this does, but I think it allows the OS to
request starting the listing partway through (which I clearly don't
yet support). Seems to always be 0 anyway.
"""
with ewrap("readdir"):
logging.debug("readdir: %s (offset %s)" % (path, offset))
return Xmp.readdir(self, path, offset)
def getattr(self, path):
"""
Retrieves information about a file (the "stat" of a file).
Returns a fuse.Stat object containing details about the file or
directory.
Returns -errno.ENOENT if the file is not found, or another negative
errno code if another error occurs.
"""
with ewrap("getattr"):
if os.path.exists("." + path):
logging.debug("getattr: %s" % path)
return Xmp.getattr(self, path)
else:
logging.debug("Skipping getattr for nonexistent path %s" %
path)
return -ENOENT
def access(self, path, flags):
"""
Checks permissions for accessing a file or directory.
mode: As described in man 2 access (Linux Programmer's Manual).
Either os.F_OK (test for existence of file), or ORing of
os.R_OK, os.W_OK, os.X_OK (test if file is readable, writable and
executable, respectively. Must pass all tests).
Should return 0 for "allowed", or -errno.EACCES if disallowed.
May not always be called. For example, when opening a file, open may
be called and access avoided.
"""
# rewritten to use flag2accessflag and explicitly return 0 in the case of allowed access
with ewrap("access"):
logging.debug("access: %s (flags %s)" % (path, oct(flags)))
if not os.access("." + path, flag2accessflag(flags)):
return -EACCES
else:
return 0
def access(self, path, flags):
"""
Checks permissions for accessing a file or directory.
mode: As described in man 2 access (Linux Programmer's Manual).
Either os.F_OK (test for existence of file), or ORing of
os.R_OK, os.W_OK, os.X_OK (test if file is readable, writable and
executable, respectively. Must pass all tests).
Should return 0 for "allowed", or -errno.EACCES if disallowed.
May not always be called. For example, when opening a file, open may
be called and access avoided.
"""
# rewritten to use flag2accessflag and explicitly return 0 in the case of allowed access
with ewrap("access"):
logging.debug("access: %s (flags %s)" % (path, oct(flags)))
if not os.access("." + path, flag2accessflag(flags)):
return -EACCES
else:
return 0
def statfs(self):
"""
Should return an object with statvfs attributes (f_bsize, f_frsize...).
Eg., the return value of os.statvfs() is such a thing (since py 2.2).
If you are not reusing an existing statvfs object, start with
fuse.StatVFS(), and define the attributes.
To provide usable information (ie., you want sensible df(1)
output, you are suggested to specify the following attributes:
- f_bsize - preferred size of file blocks, in bytes
- f_frsize - fundamental size of file blcoks, in bytes
[if you have no idea, use the same as blocksize]
- f_blocks - total number of blocks in the filesystem
- f_bfree - number of free blocks
- f_files - total number of file inodes
- f_ffree - nunber of free file inodes
"""
with ewrap("statfs"):
return Xmp.statfs(self)
def write(self, path, buf, offset, fh=None):
"""
Write over part of a file.
buf: Byte string containing the text to write.
offset: Offset in bytes from the start of the file to write to.
Does not need to check access rights (operating system will always
call access or open first).
Should only overwrite the part of the file from offset to
offset+len(buf).
Must return an int: the number of bytes successfully written (should
be equal to len(buf) unless an error occured). May also be a negative
int, which is an errno code.
"""
with ewrap("write"):
logging.debug("write: %s (offset %s, fh %s)" % (path, offset, fh))
logging.debug(" buf: %r" % buf)
fh.seek(offset)
fh.write(buf)
return len(buf)
def write(self, path, buf, offset, fh=None):
"""
Write over part of a file.
buf: Byte string containing the text to write.
offset: Offset in bytes from the start of the file to write to.
Does not need to check access rights (operating system will always
call access or open first).
Should only overwrite the part of the file from offset to
offset+len(buf).
Must return an int: the number of bytes successfully written (should
be equal to len(buf) unless an error occured). May also be a negative
int, which is an errno code.
"""
with ewrap("write"):
logging.debug("write: %s (offset %s, fh %s)" % (path, offset, fh))
logging.debug(" buf: %r" % buf)
fh.seek(offset)
fh.write(buf)
return len(buf)
def statfs(self):
"""
Should return an object with statvfs attributes (f_bsize, f_frsize...).
Eg., the return value of os.statvfs() is such a thing (since py 2.2).
If you are not reusing an existing statvfs object, start with
fuse.StatVFS(), and define the attributes.
To provide usable information (ie., you want sensible df(1)
output, you are suggested to specify the following attributes:
- f_bsize - preferred size of file blocks, in bytes
- f_frsize - fundamental size of file blcoks, in bytes
[if you have no idea, use the same as blocksize]
- f_blocks - total number of blocks in the filesystem
- f_bfree - number of free blocks
- f_files - total number of file inodes
- f_ffree - nunber of free file inodes
"""
with ewrap("statfs"):
return Xmp.statfs(self)
def read(self, path, size, offset, fh=None):
"""
Get all or part of the contents of a file.
size: Size in bytes to read.
offset: Offset in bytes from the start of the file to read from.
Does not need to check access rights (operating system will always
call access or open first).
Returns a byte string with the contents of the file, with a length no
greater than 'size'. May also return an int error code.
If the length of the returned string is 0, it indicates the end of the
file, and the OS will not request any more. If the length is nonzero,
the OS may request more bytes later.
To signal that it is NOT the end of file, but no bytes are presently
available (and it is a non-blocking read), return -errno.EAGAIN.
If it is a blocking read, just block until ready.
"""
with ewrap("read"):
logging.debug("read: %s (size %s, offset %s, fh %s)" % (path, size, offset, fh))
fh.seek(offset)
return fh.read(size)
def symlink(self, target, name):
"""
Creates a symbolic link from path to target.
The 'name' is a regular path like any other method (absolute, but
relative to the filesystem root).
The 'target' is special - it works just like any symlink target. It
may be absolute, in which case it is absolute on the user's system,
NOT the mounted filesystem, or it may be relative. It should be
treated as an opaque string - the filesystem implementation should not
ever need to follow it (that is handled by the OS).
Hence, if the operating system creates a link FROM this system TO
another system, it will call this method with a target pointing
outside the filesystem.
If the operating system creates a link FROM some other system TO this
system, it will not touch this system at all (symlinks do not depend
on the target system unless followed).
"""
with ewrap("symlink"):
logging.debug("symlink: target %s, name: %s" % (target, name))
Xmp.symlink(self, target, name)
def release(self, path, flags, fh=None):
"""
Closes an open file. Allows filesystem to clean up.
flags: The same flags the file was opened with (see open).
"""
with ewrap("release"):
logging.debug("release: %s (flags %s, fh %s)" % (path, oct(flags), fh))
fh.close()
if not self._blacklisted(path):
saved = False
count = 0
while (not saved and count < 5):
count += 1
try:
self.sha1db.updateChecksum(self.root + path)
saved = True
except Exception as einst:
logging.warn("Update failed; trying again")
if not saved:
logging.error("Unable to update checksum; quitting")
def read(self, path, size, offset, fh=None):
"""
Get all or part of the contents of a file.
size: Size in bytes to read.
offset: Offset in bytes from the start of the file to read from.
Does not need to check access rights (operating system will always
call access or open first).
Returns a byte string with the contents of the file, with a length no
greater than 'size'. May also return an int error code.
If the length of the returned string is 0, it indicates the end of the
file, and the OS will not request any more. If the length is nonzero,
the OS may request more bytes later.
To signal that it is NOT the end of file, but no bytes are presently
available (and it is a non-blocking read), return -errno.EAGAIN.
If it is a blocking read, just block until ready.
"""
with ewrap("read"):
logging.debug("read: %s (size %s, offset %s, fh %s)" %
(path, size, offset, fh))
fh.seek(offset)
return fh.read(size)
def symlink(self, target, name):
"""
Creates a symbolic link from path to target.
The 'name' is a regular path like any other method (absolute, but
relative to the filesystem root).
The 'target' is special - it works just like any symlink target. It
may be absolute, in which case it is absolute on the user's system,
NOT the mounted filesystem, or it may be relative. It should be
treated as an opaque string - the filesystem implementation should not
ever need to follow it (that is handled by the OS).
Hence, if the operating system creates a link FROM this system TO
another system, it will call this method with a target pointing
outside the filesystem.
If the operating system creates a link FROM some other system TO this
system, it will not touch this system at all (symlinks do not depend
on the target system unless followed).
"""
with ewrap("symlink"):
logging.debug("symlink: target %s, name: %s" % (target, name))
Xmp.symlink(self, target, name)
def release(self, path, flags, fh=None):
"""
Closes an open file. Allows filesystem to clean up.
flags: The same flags the file was opened with (see open).
"""
with ewrap("release"):
logging.debug("release: %s (flags %s, fh %s)" %
(path, oct(flags), fh))
fh.close()
if not self._blacklisted(path):
saved = False
count = 0
while (not saved and count < 5):
count += 1
try:
self.sha1db.updateChecksum(self.root + path)
saved = True
except Exception as einst:
logging.warn("Update failed; trying again")
if not saved:
logging.error("Unable to update checksum; quitting")
def fsinit(self):
"""
Will be called after the command line arguments are successfully
parsed. It doesn't have to exist or do anything, but as options to the
filesystem are not available in __init__, fsinit is more suitable for
the mounting logic than __init__.
To access the command line passed options and nonoption arguments, use
cmdline.
The mountpoint is not stored in cmdline.
"""
with ewrap("fsinit"):
logging.debug("Nonoption arguments: " + str(self.cmdline[1]))
#self.xyz = self.cmdline[0].xyz
#if self.xyz != None:
# logging.debug("xyz set to '" + self.xyz + "'")
#else:
# logging.debug("xyz not set")
Xmp.fsinit(self)
logging.debug("Filesystem %s mounted" % self.root)
def fsinit(self):
"""
Will be called after the command line arguments are successfully
parsed. It doesn't have to exist or do anything, but as options to the
filesystem are not available in __init__, fsinit is more suitable for
the mounting logic than __init__.
To access the command line passed options and nonoption arguments, use
cmdline.
The mountpoint is not stored in cmdline.
"""
with ewrap("fsinit"):
logging.debug("Nonoption arguments: " + str(self.cmdline[1]))
#self.xyz = self.cmdline[0].xyz
#if self.xyz != None:
# logging.debug("xyz set to '" + self.xyz + "'")
#else:
# logging.debug("xyz not set")
Xmp.fsinit(self)
logging.debug("Filesystem %s mounted" % self.root)
def chmod(self, path, mode):
"""Changes the mode of a file or directory."""
with ewrap("chmod"):
logging.debug("chmod: %s (mode %s)" % (path, oct(mode)))
Xmp.chmod(self, path, mode)
def chown(self, path, user, group):
"""Changes the owner of a file or directory."""
with ewrap("chown"):
logging.debug("chown: %s (uid %s, gid %s)" % (path, user, group))
Xmp.chown(self, path, user, group)
def truncate(self, path, len):
# rewritten to ensure file closing
with ewrap("truncate"):
with file("." + path, "a") as f:
f.truncate(len)
def chmod(self, path, mode):
"""Changes the mode of a file or directory."""
with ewrap("chmod"):
logging.debug("chmod: %s (mode %s)" % (path, oct(mode)))
Xmp.chmod(self, path, mode)
def rmdir(self, path):
"""Deletes a directory."""
with ewrap("rmdir"):
logging.debug("rmdir: %s" % path)
Xmp.rmdir(self, path)
def chown(self, path, user, group):
"""Changes the owner of a file or directory."""
with ewrap("chown"):
logging.debug("chown: %s (uid %s, gid %s)" % (path, user, group))
Xmp.chown(self, path, user, group)
def unlink(self, path):
"""Deletes a file."""
with ewrap("unlink"):
logging.debug("unlink: %s" % path)
Xmp.unlink(self, path)
self.sha1db.removeChecksum(self.root + path)
def truncate(self, path, len):
# rewritten to ensure file closing
with ewrap("truncate"):
with file("." + path, "a") as f:
f.truncate(len)
def unlink(self, path):
"""Deletes a file."""
with ewrap("unlink"):
logging.debug("unlink: %s" % path)
Xmp.unlink(self, path)
self.sha1db.removeChecksum(self.root + path)
def rmdir(self, path):
"""Deletes a directory."""
with ewrap("rmdir"):
logging.debug("rmdir: %s" % path)
Xmp.rmdir(self, path)
