def add_tem_membranes(self, widths, length, pitch, layer):
tem_membranes = Cell('TEM_Membranes')
n = 3
curr_y = 0
for width in widths:
membrane = Path([(-length / 2., 0), (length / 2., 0)],
width=width,
layer=layer)
membrane_cell = Cell('Membrane_w{:.0f}'.format(width * 1000))
membrane_cell.add(membrane)
membrane_array = CellArray(membrane_cell, 1, n, (0, pitch))
membrane_array_cell = Cell('MembraneArray_w{:.0f}'.format(width *
1000))
membrane_array_cell.add(membrane_array)
tem_membranes.add(membrane_array_cell, origin=(0, curr_y))
curr_y += n * pitch
n2 = 5
tem_membranes2 = Cell('Many_TEM_Membranes')
tem_membranes2.add(
CellArray(tem_membranes, 1, n2, (0, n * len(widths) * pitch)))
self.block_up.add(tem_membranes2, origin=(0, -2000))
# self.block_up.add(tem_membranes2, origin=(0, -1400), rotation=90)
self.block_down.add(tem_membranes2, origin=(0, 2000))
def makeYShapes(self, length, width, rotAngle, spacing, Nx, Ny, layers):
if not (type(layers) == list): layers = [layers]
pt1 = np.array((0, -width / 2.))
pt2 = np.array((length, width / 2.))
slit = Cell("Slit")
for l in layers:
rect = Rectangle(pt1, pt2, layer=l)
slit.add(rect)
shape = Cell('Shapes')
shape.add(slit, rotation=0 + rotAngle)
shape.add(slit, rotation=120 + rotAngle)
shape.add(slit, rotation=240 + rotAngle)
# CellArray(slit, Nx, Ny,(length + spacing, pitchV))
xspacing = length + spacing
yspacing = (length + spacing) * np.sin(np.deg2rad(60))
shapearray = CellArray(
shape,
Nx,
Ny / 2, (xspacing, yspacing * 2.),
origin=(-(Nx * xspacing - spacing) / 2.,
-(Ny * yspacing - spacing * np.sin(np.deg2rad(60))) /
2.))
shapearray2 = CellArray(
shape,
Nx,
Ny / 2, (xspacing, yspacing * 2.),
origin=(
xspacing / 2. - (Nx * xspacing - spacing) / 2., yspacing -
(Ny * yspacing - spacing * np.sin(np.deg2rad(60))) / 2.))
allshapes = Cell('All Shapes')
allshapes.add(shapearray)
allshapes.add(shapearray2)
self.add(allshapes)
def makeSlitArray(pitches, spacing, widths, lengths, rotAngle, arrayHeight,
arraySpacing, layers):
'''
Give it a single pitch and width and it will generate an array for all the lengths
'''
if not (type(layers) == list): layers = [layers]
if not (type(pitches) == list): pitches = [pitches]
if not (type(lengths) == list): lengths = [lengths]
if not (type(widths) == list): widths = [widths]
for l in layers:
i = -1
j = -1
manyslits = Cell("SlitArray")
slitarray = Cell("SlitArray")
pitch = pitches[0]
width = widths[0]
j += 1
i = -1
xlength = 0
slit = Cell("Slits")
for length in lengths:
spacing = length / 5. + 0.1
i += 1
pitchV = pitch / np.cos(np.deg2rad(rotAngle))
# widthV = width / np.cos(np.deg2rad(rotAngle))
# Nx = int(arrayWidth / (length + spacing))
Ny = int(arrayHeight / (pitchV))
# Define the slits
if xlength == 0:
translation = (length / 2., 0)
xlength += length
else:
translation = (xlength + spacing + length / 2., 0)
xlength += length + spacing
pt1 = np.array((-length / 2., -width / 2.)) + translation
pt2 = np.array((length / 2., width / 2.)) + translation
rect = Rectangle(pt1, pt2, layer=l)
rect = rect.copy().rotate(rotAngle)
slit.add(rect)
slits = CellArray(slit, 1, Ny, (0, pitchV))
# slits.translate((-(Nx - 1) * (length + spacing) / 2., -(Ny - 1)* (pitchV) / 2.))
slits.translate(
(-slits.bounding_box[1, 0] / 2., -slits.bounding_box[1, 1] / 2.))
slitarray.add(slits)
text = Label('w/p\n%i/%i' % (width * 1000, pitch * 1000), 2)
lblVertOffset = 1.4
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, arrayHeight /
lblVertOffset)))) # Center justify label
slitarray.add(text)
# manyslits.add(slitarray,origin=((arrayWidth + arraySpacing) * i, (arrayHeight + 2.*arraySpacing) * j-arraySpacing/2.))
manyslits.add(slitarray)
# self.add(manyslits, origin=(-i * (arrayWidth + arraySpacing) / 2, -j * (arrayHeight + arraySpacing) / 2))
# self.add(manyslits)
return manyslits
def makeSlitArray3(pitches, spacing, widths, lengths, rotAngle,
arrayHeight, arrayWidth, arraySpacing, layers):
'''
Give it a single pitch and arrays for spacings/widths and it will generate an array for all the combinations
Makes seperate frame for each pitch
'''
if not (type(layers) == list): layers = [layers]
if not (type(pitches) == list): pitches = [pitches]
if not (type(lengths) == list): lengths = [lengths]
if not (type(widths) == list): widths = [widths]
for l in layers:
i = -1
j = -1
manyslits = Cell("SlitArray")
length = lengths[0]
spacing = length / 5. + 0.1 # Set the spacing between arrays
for pitch in pitches:
j += 1
i = -1
for width in widths:
# for pitch in pitches:
i += 1
if i % 3 == 0:
j += 1 # Move to array to next line
i = 0 # Restart at left
pitchV = pitch / np.cos(np.deg2rad(rotAngle))
# widthV = width / np.cos(np.deg2rad(rotAngle))
Nx = int(arrayWidth / (length + spacing))
Ny = int(arrayHeight / (pitchV))
# Define the slits
slit = Cell("Slits")
rect = Rectangle(
(-length / 2., -width / 2.),
(length / 2., width / 2.),
layer=l)
rect = rect.copy().rotate(rotAngle)
slit.add(rect)
slits = CellArray(slit, Nx, Ny,
(length + spacing, pitchV))
slits.translate((-(Nx - 1) * (length + spacing) / 2., -(Ny - 1) * (pitchV) / 2.))
slitarray = Cell("SlitArray")
slitarray.add(slits)
text = Label('w/p/l\n%i/%i/%i' % (width * 1000, pitch * 1000, length * 1000), 2)
lblVertOffset = 1.35
if j % 2 == 0:
text.translate(
tuple(np.array(-text.bounding_box.mean(0)) + np.array((
0, -arrayHeight / lblVertOffset)))) # Center justify label
else:
text.translate(
tuple(np.array(-text.bounding_box.mean(0)) + np.array((
0, arrayHeight / lblVertOffset)))) # Center justify label
slitarray.add(text)
manyslits.add(slitarray,
origin=((arrayWidth + arraySpacing) * i, (
arrayHeight + 2. * arraySpacing) * j - arraySpacing / 2.))
return manyslits
def slit_elongation_array(pitches, spacing, widths, lengths, rot_angle,
array_height, array_spacing, layers):
if not (type(layers) == list):
layers = [layers]
if not (type(pitches) == list):
pitches = [pitches]
if not (type(lengths) == list):
lengths = [lengths]
if not (type(widths) == list):
widths = [widths]
for l in layers:
j = -1
manyslits = Cell("SlitArray")
slitarray = Cell("SlitArray")
pitch = pitches[0]
width = widths[0]
j += 1
i = -1
x_length = 0
slit = Cell("Slits")
for length in lengths:
spacing = length / 5. + 0.1
i += 1
pitch_v = pitch / np.cos(np.deg2rad(rot_angle))
n_y = int(array_height / pitch_v)
# Define the slits
if x_length == 0:
translation = (length / 2., 0)
x_length += length
else:
translation = (x_length + spacing + length / 2., 0)
x_length += length + spacing
pt1 = np.array((-length / 2., -width / 2.)) + translation
pt2 = np.array((length / 2., width / 2.)) + translation
rect = Rectangle(pt1, pt2, layer=l)
rect = rect.copy().rotate(rot_angle)
slit.add(rect)
slits = CellArray(slit, 1, n_y, (0, pitch_v))
slits.translate(
(-slits.bounding_box[1, 0] / 2., -slits.bounding_box[1, 1] / 2.))
slitarray.add(slits)
text = Label('w/p\n%i/%i' % (width * 1000, pitch * 1000), 2)
lbl_vert_offset = 1.4
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, array_height /
lbl_vert_offset)))) # Center justify label
slitarray.add(text)
manyslits.add(slitarray)
return manyslits
def makeArrowShape(self, length, width, rotAngle, spacing, Nx, Ny, layers):
if not (type(layers) == list): layers = [layers]
pt1 = np.array((-width * 0.3, -width / 2.))
pt2 = np.array((length, width / 2.))
slit = Cell("Slit")
for l in layers:
rect = Rectangle(pt1, pt2, layer=l)
slit.add(rect)
shape = Cell('Shapes')
shape.add(slit, rotation=-120)
shape.add(slit, rotation=120)
xspacing = (width + spacing) / np.cos(np.deg2rad(30))
yspacing = (length + spacing / 2.) * np.sin(np.deg2rad(60))
shapearray = CellArray(shape,
Nx,
Ny, (xspacing, yspacing * 2.),
origin=(-(Nx * xspacing - spacing) / 2.,
-(Ny * yspacing - spacing) / 2.))
allshapes = Cell('All Shapes')
allshapes.add(shapearray)
# allshapes.add(shapearray2)
# allshapes.add(shape)
self.add(allshapes)
def makeXShape(self, length, width, rotAngle, spacing, Nx, Ny, layers):
if not (type(layers) == list): layers = [layers]
pt1 = np.array((-length / 2., -width / 2.))
pt2 = np.array((length / 2., width / 2.))
slit = Cell("Slit")
for l in layers:
rect = Rectangle(pt1, pt2, layer=l)
slit.add(rect)
shape = Cell('Shapes')
shape.add(slit, rotation=60)
shape.add(slit, rotation=120)
xspacing = (length + spacing) * np.cos(np.deg2rad(60))
yspacing = (length + spacing) * np.sin(np.deg2rad(60))
shapearray = CellArray(shape,
Nx,
Ny, (xspacing, yspacing),
origin=(-(Nx * xspacing - spacing) / 2.,
-(Ny * yspacing - spacing) / 2.))
# shapearray2 = CellArray(shape, Nx, Ny/2,(xspacing,yspacing*2.),origin=(xspacing/2.-(Nx*xspacing-spacing)/2.,yspacing-(Ny*yspacing-spacing*np.tan(np.deg2rad(60)))/2.))
# shapearray = CellArray(shape, Nx, Ny,(xspacing,yspacing))
# shapearray.rotate(rotAngle)
# shapearray.translate((-shapearray.bounding_box.mean(0)[0]/2.,-shapearray.bounding_box.mean(0)[1]/2.))
allshapes = Cell('All Shapes')
allshapes.add(shapearray)
# allshapes.add(shapearray2)
# allshapes.add(shape)
self.add(allshapes)
def make_shape_array(self,
array_size,
shape_area,
shape_pitch,
type,
layer,
toplabels=False,
sidelabels=False):
num_of_shapes = int(np.ceil(array_size / shape_pitch))
base_cell = Cell('Base')
if 'tris' in type.lower():
triangle_side = np.sqrt(shape_area / np.sqrt(3) * 4)
tri_shape = RegPolygon([0, 0], triangle_side, 3, layer=layer)
tri_cell = Cell('Tri')
tri_cell.add(tri_shape)
if 'right' in type.lower():
base_cell.add(tri_cell, rotation=0)
elif 'left' in type.lower():
base_cell.add(tri_cell, rotation=60)
elif 'down' in type.lower():
base_cell.add(tri_cell, rotation=30)
elif 'up' in type.lower():
base_cell.add(tri_cell, rotation=-30)
elif type.lower() == "circles":
circ_radius = np.sqrt(shape_area / np.pi)
circ = Disk([0, 0], circ_radius, layer=layer)
base_cell.add(circ)
elif type.lower() == 'hexagons':
hex_side = np.sqrt(shape_area / 6. / np.sqrt(3) * 4)
hex_shape = RegPolygon([0, 0], hex_side, 6, layer=layer)
hex_cell = Cell('Hex')
hex_cell.add(hex_shape)
base_cell.add(hex_cell, rotation=0)
shape_array = CellArray(base_cell, num_of_shapes, num_of_shapes,
[shape_pitch, shape_pitch])
shape_array_cell = Cell('Shape Array')
shape_array_cell.add(shape_array)
if toplabels:
text = Label('{}'.format(type), 2)
lblVertOffset = 0.8
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((array_size / 2., array_size /
lblVertOffset)))) # Center justify label
shape_array_cell.add(text)
if sidelabels:
text = Label('a={:.0f}nm2'.format(shape_area * 1000**2), 2)
lblHorizOffset = 1.5
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((-array_size / lblHorizOffset,
array_size / 2.)))) # Center justify label
shape_array_cell.add(text)
return shape_array_cell
def make_shape_array(array_size, shape_area, shape_pitch, type, layer):
num_of_shapes = int(np.ceil(array_size / shape_pitch))
base_cell = Cell('Base')
if type.lower() == "circles":
circ_radius = np.sqrt(shape_area / np.pi)
circ = Disk([0, 0], circ_radius, layer=layer)
base_cell.add(circ)
elif type.lower() == 'tris_down':
triangle_side = np.sqrt(shape_area / np.sqrt(3) * 4)
tri_shape = RegPolygon([0, 0], triangle_side, 3, layer=layer)
tri_cell = Cell('Tri')
tri_cell.add(tri_shape)
base_cell.add(tri_cell, rotation=30)
elif type.lower() == 'tris_up':
triangle_side = np.sqrt(shape_area / np.sqrt(3) * 4)
tri_shape = RegPolygon([0, 0], triangle_side, 3, layer=layer)
tri_cell = Cell('Tri')
tri_cell.add(tri_shape)
base_cell.add(tri_cell, rotation=-30)
elif type.lower() == 'hexagons':
hex_side = np.sqrt(shape_area / 6. / np.sqrt(3) * 4)
hex_shape = RegPolygon([0, 0], hex_side, 6, layer=layer)
hex_cell = Cell('Hex')
hex_cell.add(hex_shape)
base_cell.add(hex_cell, rotation=0)
shape_array = CellArray(base_cell, num_of_shapes, num_of_shapes,
[shape_pitch, shape_pitch])
shape_array_cell = Cell('Shape Array')
shape_array_cell.add(shape_array)
text = Label('{}'.format(type), 2)
lblVertOffset = 0.8
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((array_size / 2.,
array_size / lblVertOffset)))) # Center justify label
shape_array_cell.add(text)
return shape_array_cell
def processCheck_Slits(self, position, arrayWidth, slitWidth, pitch,
length, rotation, layers):
if not (type(layers) == list): layers = [layers]
Nx = int(arrayWidth / pitch)
Ny = 1
for l in layers:
# Define the slits
slit = Cell("Slits")
rect = Rectangle((-slitWidth / 2., -length / 2.),
(slitWidth / 2., length / 2.),
layer=l)
slit.add(rect)
slits = CellArray(slit, Nx, Ny, (pitch, 0))
slits.translate((-(Nx) * (pitch) / 2., 0.))
slits.translate(position)
slitarray = Cell("ProcessCheckingSlits")
slitarray.add(slits)
self.add(slitarray)
def make_branch_array(x_vars, y_vars, stat_vars, var_names, spacing, rot_angle,
array_height, array_width, array_spacing, layers):
if len(var_names) != 3:
raise Exception('Error! Need to have three variable names.')
if not (type(layers) == list):
layers = [layers]
if not (type(x_vars) == list):
x_vars = [x_vars]
if not (type(y_vars) == list):
y_vars = [y_vars]
if not (type(stat_vars) == list):
stat_vars = [stat_vars]
x_var_name = var_names[0]
y_var_name = var_names[1]
stat_var_name = var_names[2]
for l in layers:
j = -1
manybranches = Cell("ManyBranches")
for x_var in x_vars:
j += 1
i = -1
for y_var in y_vars:
i += 1
if i % 3 == 0:
j += 1 # Move to array to next line
i = 0 # Restart at left
var_dict = {
x_var_name: x_var,
y_var_name: y_var,
stat_var_name: stat_vars[0]
}
pitch = var_dict['pitch']
width = var_dict['width']
length = var_dict['length']
branch = make_branch(length,
width,
layers,
rot_angle=rot_angle)
x_spacing = length + pitch
y_spacing = (length + pitch) * np.sin(np.deg2rad(60))
n_x = int(array_width / x_spacing)
n_x2 = int((array_width - x_spacing / 2.) / x_spacing)
n_y = np.round(array_height / 2. / y_spacing)
n_y2 = np.round(
(array_height - y_spacing / 2.) / 2. / y_spacing)
shape_array = CellArray(
branch,
n_x,
n_y, (x_spacing, y_spacing * 2.),
origin=(-(n_x * x_spacing - pitch) / 2.,
-(2. * n_y * y_spacing -
pitch * np.sin(np.deg2rad(60))) / 2.))
if n_x == n_x2:
translation = (x_spacing / 2. -
(n_x2 * x_spacing - pitch) / 2., y_spacing -
(2. * n_y * y_spacing -
pitch * np.sin(np.deg2rad(60))) / 2.)
else:
translation = (-(n_x2 * x_spacing - pitch) / 2.,
y_spacing -
(2. * n_y * y_spacing -
pitch * np.sin(np.deg2rad(60))) / 2.)
shape_array2 = CellArray(branch,
n_x2,
n_y2, (x_spacing, y_spacing * 2.),
origin=translation)
branch_array = Cell(
'BranchArray-{:.2f}/{:.3f}/{:.1f}-lwp'.format(
length, width, spacing))
branch_array.add(shape_array)
branch_array.add(shape_array2)
text = Label(
'w/p/l\n{:.0f}/{:.1f}/{:.1f}'.format(
width * 1000, pitch, length), 2)
lbl_vert_offset = 1.35
if j % 2 == 0:
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, -array_height / lbl_vert_offset)))
) # Center justify label
else:
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, array_height / lbl_vert_offset)))
) # Center justify label
branch_array.add(text)
manybranches.add(
branch_array,
origin=((array_width + array_spacing) * i,
(array_height + 2. * array_spacing) * j -
array_spacing / 2.))
return manybranches
def make_slit_array(x_vars, y_vars, stat_vars, var_names, spacing, rot_angle,
array_height, array_width, array_spacing, layers):
if len(var_names) != 3:
raise Exception('Error! Need to have three variable names.')
if not (type(layers) == list):
layers = [layers]
if not (type(x_vars) == list):
x_vars = [x_vars]
if not (type(y_vars) == list):
y_vars = [y_vars]
if not (type(stat_vars) == list):
stat_vars = [stat_vars]
x_var_name = var_names[0]
y_var_name = var_names[1]
stat_var_name = var_names[2]
for l in layers:
j = -1
manyslits = Cell("SlitArray")
for x_var in x_vars:
j += 1
i = -1
for y_var in y_vars:
i += 1
if i % 3 == 0:
j += 1 # Move to array to next line
i = 0 # Restart at left
var_dict = {
x_var_name: x_var,
y_var_name: y_var,
stat_var_name: stat_vars[0]
}
pitch = var_dict['pitch']
width = var_dict['width']
length = var_dict['length']
pitch_v = pitch / np.cos(np.deg2rad(rot_angle))
# widthV = width / np.cos(np.deg2rad(rotAngle))
n_x = int(array_width / (length + spacing))
n_y = int(array_height / pitch_v)
# Define the slits
slit = Cell("Slits")
rect = Rectangle((-length / 2., -width / 2.),
(length / 2., width / 2.),
layer=l)
rect = rect.copy().rotate(rot_angle)
slit.add(rect)
slits = CellArray(slit, n_x, n_y, (length + spacing, pitch_v))
slits.translate((-(n_x - 1) * (length + spacing) / 2.,
-(n_y - 1) * pitch_v / 2.))
slit_array = Cell("SlitArray")
slit_array.add(slits)
text = Label(
'w/p/l\n%i/%i/%i' %
(width * 1000, pitch * 1000, length * 1000), 2)
lbl_vert_offset = 1.35
if j % 2 == 0:
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, -array_height / lbl_vert_offset)))
) # Center justify label
else:
text.translate(
tuple(
np.array(-text.bounding_box.mean(0)) +
np.array((0, array_height / lbl_vert_offset)))
) # Center justify label
slit_array.add(text)
manyslits.add(slit_array,
origin=((array_width + array_spacing) * i,
(array_height + 2. * array_spacing) * j -
array_spacing / 2.))
return manyslits