def test_facing_ports(
data_regression: DataRegressionFixture,
check: bool = True,
):
dy = 200.0
xs1 = [-500, -300, -100, -90, -80, -55, -35, 200, 210, 240, 500, 650]
pitch = 10.0
N = len(xs1)
xs2 = [-20 + i * pitch for i in range(N // 2)]
xs2 += [400 + i * pitch for i in range(N // 2)]
a1 = 90
a2 = a1 + 180
ports1 = [Port(f"top_{i}", (xs1[i], 0), 0.5, a1) for i in range(N)]
ports2 = [Port(f"bottom_{i}", (xs2[i], dy), 0.5, a2) for i in range(N)]
c = gf.Component("test_facing_ports")
routes = get_bundle(ports1, ports2)
lengths = {}
for i, route in enumerate(routes):
c.add(route.references)
lengths[i] = route.length
if check:
data_regression.check(lengths)
difftest(c)
return c
def test_get_bundle_u_indirect(data_regression: DataRegressionFixture,
angle,
check: bool = True,
dy=-200):
xs1 = [-100, -90, -80, -55, -35] + [200, 210, 240]
axis = "X" if angle in [0, 180] else "Y"
pitch = 10.0
N = len(xs1)
xs2 = [50 + i * pitch for i in range(N)]
a1 = angle
a2 = a1 + 180
if axis == "X":
ports1 = [
Port("top_{}".format(i), (0, xs1[i]), 0.5, a1) for i in range(N)
]
ports2 = [
Port("bottom_{}".format(i), (dy, xs2[i]), 0.5, a2)
for i in range(N)
]
else:
ports1 = [
Port("top_{}".format(i), (xs1[i], 0), 0.5, a1) for i in range(N)
]
ports2 = [
Port("bottom_{}".format(i), (xs2[i], dy), 0.5, a2)
for i in range(N)
]
c = gf.Component(f"test_get_bundle_u_indirect_{angle}_{dy}")
routes = get_bundle(ports1, ports2, bend=gf.components.bend_circular)
lengths = {}
for i, route in enumerate(routes):
c.add(route.references)
lengths[i] = route.length
if check:
data_regression.check(lengths)
difftest(c)
return c
def add_electrical_pads_top_dc(
component: Component,
spacing: Float2 = (0.0, 100.0),
pad_array: ComponentFactory = pad_array_function,
select_ports: Callable = select_ports_electrical,
**kwargs,
) -> Component:
"""connects component electrical ports with pad array at the top
Args:
component:
spacing: component to pad spacing
pad_array:
select_ports: function to select_ports
**kwargs: route settings
"""
c = Component()
cref = c << component
ports = select_ports(cref.ports)
ports_component = list(ports.values())
ports_component = [port.copy() for port in ports_component]
for port in ports_component:
port.orientation = 90
pads = c << pad_array(columns=len(ports))
pads.x = cref.x + spacing[0]
pads.ymin = cref.ymax + spacing[1]
ports_pads = list(pads.ports.values())
ports_component = sort_ports_x(ports_component)
ports_pads = sort_ports_x(ports_pads)
routes = get_bundle(ports_component,
ports_pads,
bend=wire_corner,
**kwargs)
for route in routes:
c.add(route.references)
c.add_ports(cref.ports)
for port in ports_component:
c.ports.pop(port.name)
c.copy_child_info(component)
return c
def test_get_bundle_udirect(data_regression: DataRegressionFixture,
check: bool = True,
dy=200,
angle=270):
xs1 = [-100, -90, -80, -55, -35, 24, 0] + [200, 210, 240]
axis = "X" if angle in [0, 180] else "Y"
pitch = 10.0
N = len(xs1)
xs2 = [70 + i * pitch for i in range(N)]
if axis == "X":
ports1 = [Port(f"top_{i}", (0, xs1[i]), 0.5, angle) for i in range(N)]
ports2 = [
Port(f"bottom_{i}", (dy, xs2[i]), 0.5, angle) for i in range(N)
]
else:
ports1 = [Port(f"top_{i}", (xs1[i], 0), 0.5, angle) for i in range(N)]
ports2 = [
Port(f"bottom_{i}", (xs2[i], dy), 0.5, angle) for i in range(N)
]
c = gf.Component(name="test_get_bundle_udirect")
routes = get_bundle(ports1, ports2, bend=gf.components.bend_circular)
lengths = {}
for i, route in enumerate(routes):
c.add(route.references)
lengths[i] = route.length
if check:
data_regression.check(lengths)
difftest(c)
return c
def test_get_bundle_u_indirect(angle=0):
"""
FIXME: start_straight_length is getting ignored in this case
"""
dy = -200
xs1 = [-100, -90, -80, -55, -35] + [200, 210, 240]
axis = "X" if angle in [0, 180] else "Y"
pitch = 10.0
N = len(xs1)
xs2 = [50 + i * pitch for i in range(N)]
a1 = angle
a2 = a1 + 180
if axis == "X":
ports1 = [Port("top_{}".format(i), (0, xs1[i]), 0.5, a1) for i in range(N)]
ports2 = [Port("bot_{}".format(i), (dy, xs2[i]), 0.5, a2) for i in range(N)]
else:
ports1 = [Port("top_{}".format(i), (xs1[i], 0), 0.5, a1) for i in range(N)]
ports2 = [Port("bot_{}".format(i), (xs2[i], dy), 0.5, a2) for i in range(N)]
c = gf.Component(f"test_get_bundle_u_indirect_{angle}_{dy}")
routes = get_bundle(
ports1,
ports2,
bend=gf.components.bend_circular,
end_straight_length=5,
start_straight_length=1,
)
for route in routes:
c.add(route.references)
return c
def test_get_bundle(data_regression: DataRegressionFixture,
check: bool = True):
xs_top = [-100, -90, -80, 0, 10, 20, 40, 50, 80, 90, 100, 105, 110, 115]
pitch = 127.0
N = len(xs_top)
xs_bottom = [(i - N / 2) * pitch for i in range(N)]
top_ports = [Port(f"top_{i}", (xs_top[i], 0), 0.5, 270) for i in range(N)]
bottom_ports = [
Port(f"bottom_{i}", (xs_bottom[i], -400), 0.5, 90) for i in range(N)
]
c = gf.Component("test_get_bundle")
routes = get_bundle(top_ports, bottom_ports)
lengths = {}
for i, route in enumerate(routes):
c.add(route.references)
lengths[i] = route.length
if check:
data_regression.check(lengths)
difftest(c)
return c
def test_connect_corner(config: str,
data_regression: DataRegressionFixture,
check: bool = True,
N=6) -> Component:
d = 10.0
sep = 5.0
c = Component(name=f"test_connect_corner_{config}")
if config in ["A", "B"]:
a = 100.0
ports_A_TR = [
Port("A_TR_{}".format(i), (d, a / 2 + i * sep), 0.5, 0)
for i in range(N)
]
ports_A_TL = [
Port("A_TL_{}".format(i), (-d, a / 2 + i * sep), 0.5, 180)
for i in range(N)
]
ports_A_BR = [
Port("A_BR_{}".format(i), (d, -a / 2 - i * sep), 0.5, 0)
for i in range(N)
]
ports_A_BL = [
Port("A_BL_{}".format(i), (-d, -a / 2 - i * sep), 0.5, 180)
for i in range(N)
]
ports_A = [ports_A_TR, ports_A_TL, ports_A_BR, ports_A_BL]
ports_B_TR = [
Port("B_TR_{}".format(i), (a / 2 + i * sep, d), 0.5, 90)
for i in range(N)
]
ports_B_TL = [
Port("B_TL_{}".format(i), (-a / 2 - i * sep, d), 0.5, 90)
for i in range(N)
]
ports_B_BR = [
Port("B_BR_{}".format(i), (a / 2 + i * sep, -d), 0.5, 270)
for i in range(N)
]
ports_B_BL = [
Port("B_BL_{}".format(i), (-a / 2 - i * sep, -d), 0.5, 270)
for i in range(N)
]
ports_B = [ports_B_TR, ports_B_TL, ports_B_BR, ports_B_BL]
elif config in ["C", "D"]:
a = N * sep + 2 * d
ports_A_TR = [
Port("A_TR_{}".format(i), (a, d + i * sep), 0.5, 0)
for i in range(N)
]
ports_A_TL = [
Port("A_TL_{}".format(i), (-a, d + i * sep), 0.5, 180)
for i in range(N)
]
ports_A_BR = [
Port("A_BR_{}".format(i), (a, -d - i * sep), 0.5, 0)
for i in range(N)
]
ports_A_BL = [
Port("A_BL_{}".format(i), (-a, -d - i * sep), 0.5, 180)
for i in range(N)
]
ports_A = [ports_A_TR, ports_A_TL, ports_A_BR, ports_A_BL]
ports_B_TR = [
Port("B_TR_{}".format(i), (d + i * sep, a), 0.5, 90)
for i in range(N)
]
ports_B_TL = [
Port("B_TL_{}".format(i), (-d - i * sep, a), 0.5, 90)
for i in range(N)
]
ports_B_BR = [
Port("B_BR_{}".format(i), (d + i * sep, -a), 0.5, 270)
for i in range(N)
]
ports_B_BL = [
Port("B_BL_{}".format(i), (-d - i * sep, -a), 0.5, 270)
for i in range(N)
]
ports_B = [ports_B_TR, ports_B_TL, ports_B_BR, ports_B_BL]
lengths = {}
i = 0
if config in ["A", "C"]:
for ports1, ports2 in zip(ports_A, ports_B):
routes = get_bundle(ports1, ports2)
for route in routes:
c.add(route.references)
lengths[i] = route.length
i += 1
elif config in ["B", "D"]:
for ports1, ports2 in zip(ports_A, ports_B):
routes = get_bundle(ports2, ports1)
for route in routes:
c.add(route.references)
lengths[i] = route.length
i += 1
if check:
data_regression.check(lengths)
difftest(c)
return c
def route_fiber_array(
component: Component,
fiber_spacing: float = TECH.fiber_array_spacing,
grating_coupler: ComponentOrFactory = grating_coupler_te,
bend: ComponentFactory = bend_euler,
straight: ComponentFactory = straight,
taper_factory: ComponentFactory = taper,
fanout_length: Optional[float] = None,
max_y0_optical: None = None,
with_loopback: bool = True,
nlabels_loopback: int = 2,
straight_separation: float = 6.0,
straight_to_grating_spacing: float = 5.0,
optical_routing_type: Optional[int] = None,
connected_port_names: None = None,
nb_optical_ports_lines: int = 1,
force_manhattan: bool = False,
excluded_ports: List[Any] = None,
grating_indices: None = None,
route_filter: Callable = get_route_from_waypoints,
gc_port_name: str = "o1",
gc_rotation: int = -90,
layer_label: Optional[Tuple[int, int]] = (66, 0),
layer_label_loopback: Optional[Tuple[int, int]] = None,
component_name: Optional[str] = None,
x_grating_offset: int = 0,
optical_port_labels: Optional[Tuple[str, ...]] = None,
get_input_label_text_loopback_function:
Callable = get_input_label_text_loopback,
get_input_label_text_function: Callable = get_input_label_text,
get_input_labels_function: Optional[Callable] = get_input_labels,
select_ports: Callable = select_ports_optical,
cross_section: CrossSectionFactory = strip,
**kwargs,
) -> Tuple[List[Union[ComponentReference, Label]],
List[List[ComponentReference]], List[Port]]:
"""Returns component I/O elements for adding grating couplers with a fiber array
Many components are fine with the defaults.
Args:
component: The component to connect.
fiber_spacing: the wanted spacing between the optical I/O
grating_coupler: grating coupler instance, function or list of functions
bend: for bends
straight: straight
fanout_length: target distance between gratings and the southest component port.
If None, automatically calculated.
max_y0_optical: Maximum y coordinate at which the intermediate optical ports can be set.
Usually fine to leave at None.
with_loopback: If True, add compact loopback alignment ports
nlabels_loopback: number of labels of align ports (0: no labels, 1: first port, 2: both ports2)
straight_separation: min separation between routing straights
straight_to_grating_spacing: from align ports
optical_routing_type: There are three options for optical routing
* ``0`` is very basic but can be more compact.
Can also be used in combination with ``connected_port_names``
or to route some components which otherwise fail with type ``1``.
* ``1`` is the standard routing.
* ``2`` uses the optical ports as a guideline for the component's physical size
(instead of using the actual component size).
Useful where the component is large due to metal tracks
* ``None: leads to an automatic decision based on size and number
of I/O of the component.
connected_port_names: only for type 0 optical routing.
Can specify which ports goes to which grating assuming the gratings are ordered from left to right.
e.g ['N0', 'W1','W0','E0','E1', 'N1' ] or [4,1,7,3]
nb_optical_ports_lines: number of lines with I/O grating couplers. One line by default.
WARNING: Only works properly if:
- nb_optical_ports_lines divides the total number of ports
- the components have an equal number of inputs and outputs
force_manhattan: sometimes port linker defaults to an S-bend due to lack of space to do manhattan.
Force manhattan offsets all the ports to replace the s-bend by a straight link.
This fails if multiple ports have the same issue
excluded_ports: ports excluded from routing
grating_indices: allows to fine skip some grating slots
e.g [0,1,4,5] will put two gratings separated by the pitch.
Then there will be two empty grating slots, and after that an additional two gratings.
route_filter: straight and bend factories
gc_port_name: grating_coupler port name, where to route straights
gc_rotation: grating_coupler rotation (deg)
layer_label: for TM labels
component_name: name of component
x_grating_offset: x offset
optical_port_labels: port labels to route_to_fiber_array
select_ports: function to select ports for which to add grating couplers
get_input_label_text_loopback_function: function to get input labels for grating couplers
get_input_label_text_function
Returns:
elements, io_grating_lines, list of ports
"""
x = cross_section(**kwargs)
radius = x.info["radius"]
assert isinstance(
radius,
(int,
float)), f"radius = {radius} {type (radius)} needs to be int or float"
component_name = component_name or component.name
excluded_ports = excluded_ports or []
if optical_port_labels is None:
optical_ports = list(select_ports(component.ports).values())
else:
optical_ports = [component.ports[lbl] for lbl in optical_port_labels]
optical_ports = [p for p in optical_ports if p.name not in excluded_ports]
N = len(optical_ports)
# optical_ports_labels = [p.name for p in optical_ports]
# print(optical_ports_labels)
if N == 0:
return [], [], 0
elements = []
# grating_coupler can either be a component/function
# or a list of components/functions
if isinstance(grating_coupler, list):
grating_couplers = [gf.call_if_func(g) for g in grating_coupler]
grating_coupler = grating_couplers[0]
else:
grating_coupler = gf.call_if_func(grating_coupler)
grating_couplers = [grating_coupler] * N
assert (gc_port_name in grating_coupler.ports
), f"{gc_port_name} not in {list(grating_coupler.ports.keys())}"
if gc_port_name not in grating_coupler.ports:
raise ValueError(
f"{gc_port_name} not in {list(grating_coupler.ports.keys())}")
# Now:
# - grating_coupler is a single grating coupler
# - grating_couplers is a list of grating couplers
# Define the route filter to apply to connection methods
bend90 = bend(cross_section=cross_section, **
kwargs) if callable(bend) else bend
dy = abs(bend90.info.dy)
# `delta_gr_min` Used to avoid crossing between straights in special cases
# This could happen when abs(x_port - x_grating) <= 2 * radius
dy = bend90.info.dy
delta_gr_min = 2 * dy + 1
offset = (N - 1) * fiber_spacing / 2.0
# Get the center along x axis
x_c = round(sum([p.x for p in optical_ports]) / N, 1)
y_min = component.ymin # min([p.y for p in optical_ports])
# Sort the list of optical ports:
direction_ports = direction_ports_from_list_ports(optical_ports)
sep = straight_separation
K = len(optical_ports)
K = K + 1 if K % 2 else K
# Set routing type if not specified
pxs = [p.x for p in optical_ports]
is_big_component = ((K > 2)
or (max(pxs) - min(pxs) > fiber_spacing - delta_gr_min)
or (component.xsize > fiber_spacing))
if optical_routing_type is None:
if not is_big_component:
optical_routing_type = 0
else:
optical_routing_type = 1
# choose the default length if the default fanout distance is not set
def has_p(side):
return len(direction_ports[side]) > 0
list_ew_ports_on_sides = [has_p(side) for side in ["E", "W"]]
list_ns_ports_on_sides = [has_p(side) for side in ["N", "S"]]
has_ew_ports = any(list_ew_ports_on_sides)
has_ns_ports = any(list_ns_ports_on_sides)
is_one_sided_horizontal = False
for side1, side2 in [("E", "W"), ("W", "E")]:
if len(direction_ports[side1]) >= 2:
if all([
len(direction_ports[side]) == 0
for side in ["N", "S", side2]
]):
is_one_sided_horizontal = True
# Compute fanout length if not specified
if fanout_length is None:
fanout_length = dy + 1.0
# We need 3 bends in that case to connect the most bottom port to the
# grating couplers
if has_ew_ports and is_big_component:
# print('big')
fanout_length = max(fanout_length, 3 * dy + 1.0)
if has_ns_ports or is_one_sided_horizontal:
# print('one sided')
fanout_length = max(fanout_length, 2 * dy + 1.0)
if has_ew_ports and not is_big_component:
# print('ew_ports')
fanout_length = max(fanout_length, dy + 1.0)
fanout_length += dy
# use x for grating coupler since we rotate it
y0_optical = y_min - fanout_length - grating_coupler.ports[gc_port_name].x
y0_optical += -K / 2 * sep
y0_optical = round(y0_optical, 1)
if max_y0_optical is not None:
y0_optical = round(min(max_y0_optical, y0_optical), 1)
"""
- First connect half of the north ports going from middle of list
down to first elements
- then connect west ports (top to bottom)
- then connect south ports (left to right)
- then east ports (bottom to top)
- then second half of the north ports (right to left)
"""
ports = []
north_ports = direction_ports["N"]
north_start = north_ports[0:len(north_ports) // 2]
north_finish = north_ports[len(north_ports) // 2:]
west_ports = direction_ports["W"]
west_ports.reverse()
east_ports = direction_ports["E"]
south_ports = direction_ports["S"]
north_finish.reverse() # Sort right to left
north_start.reverse() # Sort right to left
ordered_ports = north_start + west_ports + south_ports + east_ports + north_finish
nb_ports_per_line = N // nb_optical_ports_lines
grating_coupler_si = grating_coupler.size_info
y_gr_gap = (K / (nb_optical_ports_lines) + 1) * sep
gr_coupler_y_sep = grating_coupler_si.height + y_gr_gap + dy
offset = (nb_ports_per_line - 1) * fiber_spacing / 2 - x_grating_offset
io_gratings_lines = [
] # [[gr11, gr12, gr13...], [gr21, gr22, gr23...] ...]
if grating_indices is None:
grating_indices = list(range(nb_ports_per_line))
else:
assert len(grating_indices) == nb_ports_per_line
for j in range(nb_optical_ports_lines):
io_gratings = [
gc.ref(
position=(
x_c - offset + i * fiber_spacing,
y0_optical - j * gr_coupler_y_sep,
),
rotation=gc_rotation,
port_id=gc_port_name,
) for i, gc in zip(grating_indices, grating_couplers)
]
io_gratings_lines += [io_gratings[:]]
ports += [grating.ports[gc_port_name] for grating in io_gratings]
if optical_routing_type == 0:
"""
Basic optical routing, typically fine for small components
No heuristic to avoid collisions between connectors.
If specified ports to connect in a specific order
(i.e if connected_port_names is not None and not empty)
then grab these ports
"""
if connected_port_names:
ordered_ports = [component.ports[i] for i in connected_port_names]
for io_gratings in io_gratings_lines:
for i in range(N):
p0 = io_gratings[i].ports[gc_port_name]
p1 = ordered_ports[i]
waypoints = generate_manhattan_waypoints(
input_port=p0,
output_port=p1,
bend=bend90,
straight=straight,
cross_section=cross_section,
**kwargs,
)
route = route_filter(
waypoints=waypoints,
bend=bend90,
straight=straight,
cross_section=cross_section,
**kwargs,
)
elements.extend(route.references)
elif optical_routing_type in [1, 2]:
route = route_south(
component=component,
optical_routing_type=optical_routing_type,
excluded_ports=excluded_ports,
straight_separation=straight_separation,
io_gratings_lines=io_gratings_lines,
gc_port_name=gc_port_name,
bend=bend,
straight=straight,
taper_factory=taper_factory,
select_ports=select_ports,
cross_section=cross_section,
**kwargs,
)
elems = route.references
to_route = route.ports
elements.extend(elems)
if force_manhattan:
"""
1) find the min x_distance between each grating port and
each component port.
2) If abs(min distance) < 2* bend radius
then offset io_gratings by -min_distance
"""
min_dist = 2 * dy + 10.0
min_dist_threshold = 2 * dy + 1.0
for io_gratings in io_gratings_lines:
for gr in io_gratings:
for p in to_route:
dist = gr.x - p.x
if abs(dist) < abs(min_dist):
min_dist = dist
if abs(min_dist) < min_dist_threshold:
for gr in io_gratings:
gr.movex(-min_dist)
# If the array of gratings is too close, adjust its location
gc_ports_tmp = []
for io_gratings in io_gratings_lines:
gc_ports_tmp += [gc.ports[gc_port_name] for gc in io_gratings]
min_y = get_min_spacing(to_route, gc_ports_tmp, sep=sep, radius=dy)
delta_y = abs(to_route[0].y - gc_ports_tmp[0].y)
if min_y > delta_y:
for io_gratings in io_gratings_lines:
for gr in io_gratings:
gr.translate(0, delta_y - min_y)
# If we add align ports, we need enough space for the bends
end_straight_offset = (straight_separation + 5 if with_loopback else
x.info.get("min_length", 0.1))
if len(io_gratings_lines) == 1:
io_gratings = io_gratings_lines[0]
gc_ports = [gc.ports[gc_port_name] for gc in io_gratings]
routes = get_bundle(
ports1=to_route,
ports2=gc_ports,
separation=sep,
end_straight_offset=end_straight_offset,
straight=straight,
bend=bend90,
cross_section=cross_section,
**kwargs,
)
elements.extend([route.references for route in routes])
else:
for io_gratings in io_gratings_lines:
gc_ports = [gc.ports[gc_port_name] for gc in io_gratings]
nb_gc_ports = len(io_gratings)
nb_ports_to_route = len(to_route)
n0 = nb_ports_to_route / 2
dn = nb_gc_ports / 2
routes = get_bundle(
ports1=to_route[n0 - dn:n0 + dn],
ports2=gc_ports,
separation=sep,
end_straight_offset=end_straight_offset,
bend=bend90,
straight=straight,
radius=radius,
cross_section=cross_section,
**kwargs,
)
elements.extend([route.references for route in routes])
del to_route[n0 - dn:n0 + dn]
if with_loopback:
gca1, gca2 = [
grating_coupler.ref(
position=(
x_c - offset + ii * fiber_spacing,
io_gratings_lines[-1][0].ports[gc_port_name].y,
),
rotation=gc_rotation,
port_id=gc_port_name,
) for ii in [grating_indices[0] - 1, grating_indices[-1] + 1]
]
port0 = gca1.ports[gc_port_name]
port1 = gca2.ports[gc_port_name]
ports.append(port0)
ports.append(port1)
p0 = port0.position
p1 = port1.position
dy = bend90.info.dy
dx = max(2 * dy, fiber_spacing / 2)
gc_east = max([gci.size_info.east for gci in grating_couplers])
y_bot_align_route = gc_east + straight_to_grating_spacing
points = [
p0,
p0 + (0, dy),
p0 + (dx, dy),
p0 + (dx, -y_bot_align_route),
p1 + (-dx, -y_bot_align_route),
p1 + (-dx, dy),
p1 + (0, dy),
p1,
]
elements.extend([gca1, gca2])
route = round_corners(
points=points,
straight=straight,
bend=bend90,
cross_section=cross_section,
**kwargs,
)
elements.extend(route.references)
if nlabels_loopback == 1:
io_gratings_loopback = [gca1]
ordered_ports_loopback = [port0]
if nlabels_loopback == 2:
io_gratings_loopback = [gca1, gca2]
ordered_ports_loopback = [port0, port1]
elif nlabels_loopback > 2:
raise ValueError(
f"Invalid nlabels_loopback = {nlabels_loopback}, "
"valid (0: no labels, 1: first port, 2: both ports2)")
if nlabels_loopback > 0 and get_input_labels_function:
elements.extend(
get_input_labels_function(
io_gratings=io_gratings_loopback,
ordered_ports=ordered_ports_loopback,
component_name=component_name,
layer_label=layer_label_loopback or layer_label,
gc_port_name=gc_port_name,
get_input_label_text_function=
get_input_label_text_loopback_function,
))
if get_input_labels_function:
elements.extend(
get_input_labels_function(
io_gratings=io_gratings,
ordered_ports=ordered_ports,
component_name=component_name,
layer_label=layer_label,
gc_port_name=gc_port_name,
get_input_label_text_function=get_input_label_text_function,
))
return elements, io_gratings_lines, ports
