def test_single_line_config(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
intf1 = Interface(name='GigabitEthernet0/0/0/0', device=dev1, aliases=['PE1_1'])
subif1 = Interface(name='GigabitEthernet0/0/0/1.10', device=dev1, aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'test'
intf1.enabled = True
intf1.mtu = 1492
intf1.vrf = vrf
intf1.mac_address = 'aabb.ccdd.eeff'
intf1.bandwidth = 8192
intf1.load_interval = 33
intf1.unnumbered_intf_ref = 'GigabitEthernet0/0/0/1.10'
intf1.ipv6_autoconf = True
intf1.medium = 'p2p'
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' bandwidth 8192',
' description test',
' vrf test',
' ipv4 point-to-point',
' ipv4 unnumbered GigabitEthernet0/0/0/1.10',
' ipv6 address autoconfig',
' load-interval 33',
' mtu 1492',
' no shutdown',
' mac-address aabb.ccdd.eeff',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'no interface GigabitEthernet0/0/0/0',
]))
def test_single_line_config(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, aliases=['PE1_1'])
intf2 = Interface(name='Ethernet3/9', device=dev1, aliases=['PE1_2'])
subif1 = Interface(name='Ethernet3/6.10',
device=dev1,
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'test'
intf1.enabled = False
# intf1.shutdown = False
intf1.link_up_down_trap_enable = True
intf1.mtu = 1492
intf1.vrf = vrf
intf1.mac_address = 'aabb.ccdd.eeff'
intf1.bandwidth = 8192
intf1.link_status = True
intf1.load_interval = 33
intf1.dhcp = True
intf1.unnumbered_intf_ref = 'Ethernet3/6.10'
intf1.ipv6_autoconf = True
intf1.switchport_mode = 'access'
intf1.medium = 'p2p'
intf1.delay = 11
intf1.access_vlan = '19'
intf1.auto_negotiate = False
# make intf2 as L2 interface
intf1.switchport_enable = True
intf2.enabled = True
intf2.switchport_enable = True
intf2.switchport_mode = 'trunk'
intf2.trunk_add_vlans = '1,2,3'
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet3/7', ' medium p2p', ' bandwidth 8192',
' delay 11', ' description test', ' mtu 1492', ' shutdown',
' snmp trap link-status', ' vrf member test',
' logging event port link-status', ' ip address dhcp',
' ip unnumbered Ethernet3/6.10', ' ipv6 address autoconfig',
' switchport', ' switchport mode access', ' load-interval 33',
' mac-address aabb.ccdd.eeff', ' switchport access vlan 19',
' no speed', ' no duplex', ' exit'
]))
cfgs = intf2.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet3/9', ' no shutdown', ' switchport',
' switchport mode trunk',
' switchport trunk allowed vlan add 1,2,3', ' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False,
attributes={
'mtu': True,
'enabled': True
})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join(
['interface Ethernet3/7', ' no mtu', ' no shutdown', ' exit']))
uncfgs = intf2.build_unconfig(apply=False,
attributes={'trunk_add_vlans': True})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'interface Ethernet3/9',
' switchport trunk allowed vlan remove 1,2,3', ' exit'
]))
def test_all_ethernet(self):
testbed = Testbed()
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Defining attributes section
intf1.description = 'test desc'
intf1.enabled = True
intf1.link_up_down_trap_enable = True
intf1.mtu = 500
intf1.vrf = vrf
intf1.vrf_downstream = 'vrf_downstream_test'
intf1.mac_address = 'aaaa.bbbb.cccc'
intf1.bandwidth = 768
intf1.link_status = True
intf1.load_interval = 30
intf1.encapsulation = 'dot1q'
intf1.first_dot1q = '20'
intf1.second_dot1q = '30'
ipv4a = IPv4Addr(device=dev1)
ipv4a.ipv4 = IPv4Address('192.168.1.1')
ipv4a.prefix_length = '24'
intf1.add_ipv4addr(ipv4a)
ipv4b = IPv4Addr(device=dev1)
ipv4b.ipv4 = IPv4Address('192.168.1.2')
ipv4b.prefix_length = '24'
ipv4b.ipv4_secondary = True
intf1.add_ipv4addr(ipv4b)
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
ipv6b.ipv6_anycast = True
intf1.dhcp = True
intf1.dhcp_client_id = '10'
intf1.dhcp_hostname = 'dhcp-host'
intf1.unnumbered_intf_ref = 'GigabitEthernet0/0/2.20'
intf1.ipv6_unnumbered_intf_ref = 'GigabitEthernet0/0/3.100'
intf1.ipv6_enabled = True
intf1.ipv6_autoconf = True
intf1.ipv6_autoconf_default = True
intf1.medium = "broadcast"
intf1.delay = 100
intf1.port_speed = '1000'
intf1.auto_negotiate = True
intf1.duplex_mode = "full"
intf1.flow_control_receive = True
intf1.flow_control_send = False
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' encapsulation dot1q 20 second-dot1q 30',
' vrf forwarding test downstream vrf_downstream_test',
' description test desc',
' bandwidth 768',
' mtu 500',
' no shutdown',
' snmp trap link-status',
' logging event link-status',
' load-interval 30',
' ipv6 enable',
' ipv6 address autoconfig default',
' ip unnumbered GigabitEthernet0/0/2.20',
' ipv6 unnumbered GigabitEthernet0/0/3.100',
' speed 1000',
' negotiation auto',
' duplex full',
' flowcontrol receive on',
' flowcontrol send off',
' ip address dhcp client-id 10 hostname dhcp-host',
' medium broadcast',
' delay 100',
' ip address 192.168.1.1 255.255.255.0',
' ip address 192.168.1.2 255.255.255.0 secondary',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64 anycast',
' mac-address aaaa.bbbb.cccc',
' exit',
]))
# Check unconfig without attribtues
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface GigabitEthernet0/0/1',
'interface GigabitEthernet0/0/1',
'shutdown',
]))
# Check ipv4 unconfig
uncfg = intf1.build_unconfig(apply=False, attributes="ipv4addr")
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no ip address 192.168.1.1 255.255.255.0',
' no ip address 192.168.1.2 255.255.255.0 secondary',
' exit',
]))
# Check encapsulation unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={
"encapsulation": None,
"first_dot1q": None
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q',
' exit',
]))
