def load_files(gnpy_topology):
""" Load GNPy equipment Library and create network from topology"""
eqpt_library = load_equipment(
'../examples/default_equipment_data/eqpt_config.json')
gnpy_network = network_from_json(topology_to_json(gnpy_topology),
eqpt_library)
return eqpt_library, gnpy_network
def test_target_pch_out_db_global(case):
""" check that per degree attributes are correctly created with global values if none are given
"""
json_network = setup_per_degree(case)
per_degree = {}
for elem in json_network['elements']:
if 'type' in elem.keys() and elem['type'] == 'Roadm' and 'params' in elem.keys() \
and 'per_degree_pch_out_db' in elem['params']:
# records roadms that have a per degree target
per_degree[elem['uid']] = {
k: v
for k, v in elem['params']['per_degree_pch_out_db'].items()
}
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density: db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
data = network_to_json(network)
for elem in data['elements']:
if 'type' in elem.keys() and elem['type'] == 'Roadm':
# check that power target attributes exist and are filled with correct values
# first check that global 'target_pch_out_db' is correctly filled
assert elem['params']['target_pch_out_db'] == equipment['Roadm'][
'default'].target_pch_out_db
for degree, power in elem['params']['per_degree_pch_out_db'].items(
):
if elem['uid'] not in per_degree.keys():
# second: check that per degree 'target_pch_out_db' is correctly filled with global value
# when there was no per degree specification on network input
assert power == equipment['Roadm'][
'default'].target_pch_out_db
else:
if degree not in per_degree[elem['uid']].keys():
# third: check that per degree 'target_pch_out_db' is correctly filled with global value
# on degrees that had no specification when other degrees are filled
assert power == equipment['Roadm'][
'default'].target_pch_out_db
else:
# fourth: check that per degree 'target_pch_out_db' is correctly filled with specified values
assert power == per_degree[elem['uid']][degree]
def test_no_amp_feature(node_uid):
''' Check that booster is not placed on a roadm if fused is specified
test_parser covers partly this behaviour. This test should guaranty that the
feature is preserved even if convert is changed
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(NETWORK_FILE_NAME)
for elem in json_network['elements']:
if elem['uid'] == node_uid:
# replace edfa node by a fused node in the topology
elem['type'] = 'Fused'
elem.pop('type_variety')
elem.pop('operational')
elem['params'] = {'loss': 0}
next_node_uid = next(conn['to_node']
for conn in json_network['connections']
if conn['from_node'] == node_uid)
previous_node_uid = next(conn['from_node']
for conn in json_network['connections']
if conn['to_node'] == node_uid)
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
node = next(nd for nd in network.nodes() if nd.uid == node_uid)
next_node = next(network.successors(node))
previous_node = next(network.predecessors(node))
if not isinstance(node, Fused):
raise AssertionError()
if not node.params.loss == 0.0:
raise AssertionError()
if not next_node_uid == next_node.uid:
raise AssertionError()
if not previous_node_uid == previous_node.uid:
raise AssertionError()
def test_roadm_target_power(prev_node_type, effective_pch_out_db, power_dbm):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
p_total_db = power_dbm + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, power_dbm, p_total_db)
params = {
'request_id': 0,
'trx_type': '',
'trx_mode': '',
'source': 'trx node A',
'destination': 'trx node C',
'bidir': False,
'nodes_list': ['trx node C'],
'loose_list': ['strict'],
'format': '',
'path_bandwidth': 100e9,
'effective_freq_slot': None,
}
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
req.power = db2lin(power_dbm - 30)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
# if previous was an EDFA, power level at ROADM input is enough for the ROADM to apply its
# target power (as specified in equipment ie -20 dBm)
# if it is a Fused, the input power to the ROADM is smaller than the target power, and the
# ROADM cannot apply this target. In this case, it is assumed that the ROADM has 0 dB loss
# so the output power will be the same as the input power, which for this particular case
# corresponds to -22dBm + power_dbm
# next step (for ROADM modelling) will be to apply a minimum loss for ROADMs !
if prev_node_type == 'edfa':
assert el.effective_pch_out_db == effective_pch_out_db
if prev_node_type == 'fused':
# then output power == input_power == effective_pch_out_db + power_dbm
assert effective_pch_out_db + power_dbm == \
pytest.approx(lin2db(carriers_power_in_roadm * 1e3), rel=1e-3)
assert el.effective_pch_out_db == effective_pch_out_db + power_dbm
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)
def test_restrictions(restrictions, equipment):
''' test that restriction is correctly applied if provided in eqpt_config and if no Edfa type
were provided in the network json
'''
# add restrictions
equipment['Roadm']['default'].restrictions = restrictions
# build network
json_network = load_json(NETWORK_FILE_NAME)
network = network_from_json(json_network, equipment)
amp_nodes_nobuild_uid = [
nd.uid for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.predecessors(nd)), Roadm)
]
preamp_nodes_nobuild_uid = [
nd.uid for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.successors(nd)), Roadm)
]
amp_nodes_nobuild = {
nd.uid: nd
for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.predecessors(nd)), Roadm)
}
preamp_nodes_nobuild = {
nd.uid: nd
for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.successors(nd)), Roadm)
}
# roadm dict with restrictions before build
roadms = {nd.uid: nd for nd in network.nodes() if isinstance(nd, Roadm)}
# Build the network once using the default power defined in SI in eqpt config
# power density : db2linp(ower_dbm": 0)/power_dbm": 0 * nb channels as defined by
# spacing, f_min and f_max
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
amp_nodes = [
nd for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.predecessors(nd)), Roadm)
and next(network.predecessors(nd)).restrictions['booster_variety_list']
]
preamp_nodes = [
nd for nd in network.nodes() if isinstance(nd, Edfa)
and isinstance(next(network.successors(nd)), Roadm)
and next(network.successors(nd)).restrictions['preamp_variety_list']
]
# check that previously existing amp are not changed
for amp in amp_nodes:
if amp.uid in amp_nodes_nobuild_uid:
print(amp.uid, amp.params.type_variety)
if not amp.params.type_variety == amp_nodes_nobuild[
amp.uid].params.type_variety:
raise AssertionError()
for amp in preamp_nodes:
if amp.uid in preamp_nodes_nobuild_uid:
if not amp.params.type_variety == preamp_nodes_nobuild[
amp.uid].params.type_variety:
raise AssertionError()
# check that restrictions are correctly applied
for amp in amp_nodes:
if amp.uid not in amp_nodes_nobuild_uid:
# and if roadm had no restrictions before build:
if restrictions['booster_variety_list'] and \
not roadms[next(network.predecessors(amp)).uid]\
.restrictions['booster_variety_list']:
if amp.params.type_variety not in restrictions[
'booster_variety_list']:
raise AssertionError()
for amp in preamp_nodes:
if amp.uid not in preamp_nodes_nobuild_uid:
if restrictions['preamp_variety_list'] and\
not roadms[next(network.successors(amp)).uid].restrictions['preamp_variety_list']:
if amp.params.type_variety not in restrictions[
'preamp_variety_list']:
raise AssertionError()
def test_roadm_target_power(prev_node_type, effective_pch_out_db):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
params = {}
params['request_id'] = 0
params['trx_type'] = ''
params['trx_mode'] = ''
params['source'] = 'trx node A'
params['destination'] = 'trx node C'
params['bidir'] = False
params['nodes_list'] = ['trx node C']
params['loose_list'] = ['strict']
params['format'] = ''
params['path_bandwidth'] = 100e9
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
assert el.effective_pch_out_db == effective_pch_out_db
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)