def __init__(self, decim=32, sync_check=False, satellite='METEOR-M-1', baseband_file=os.environ['HOME'] + '/METEOR-M-1.dat', frames_file=os.environ['HOME'] + '/METEOR-M-1.hrpt'):
gr.top_block.__init__(self, "Meteor M N1 HRPT Baseband To Frames")
##################################################
# Parameters
##################################################
self.decim = decim
self.sync_check = sync_check
self.satellite = satellite
self.baseband_file = baseband_file
self.frames_file = frames_file
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.sps = sps = sample_rate/sym_rate
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/mn1_hrpt.conf'
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat("satname", 'pll_alpha')
except: saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat("satname", 'clock_alpha')
except: saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.frame_sink = gr.file_sink(gr.sizeof_short*1, frames_file)
self.frame_sink.set_unbuffered(False)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, saved_clock_alpha**2/4.0, 0.5, saved_clock_alpha, max_clock_offset)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short*1, baseband_file, False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.pll = noaa.hrpt_pll_cf(saved_pll_alpha, saved_pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_mn1_hrpt_deframer_0 = poesweather.mn1_hrpt_deframer(sync_check)
self.throttle = gr.throttle(gr.sizeof_short*1, sample_rate*10)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.throttle, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_mn1_hrpt_deframer_0, 0))
self.connect((self.poesweather_mn1_hrpt_deframer_0, 0), (self.frame_sink, 0))
def __init__(self, fs, svn, alpha, fd_range, dump_bins=False):
gr.hier_block2.__init__(self,
"acquisition",
gr.io_signature(1,1, gr.sizeof_gr_complex),
gr.io_signature(3,3, gr.sizeof_float))
fft_size = int( 1e-3*fs)
doppler_range = self.get_doppler_range(fd_range)
agc = gr.agc_cc( 1.0/fs, 1.0, 1.0, 1.0)
s2v = gr.stream_to_vector(gr.sizeof_gr_complex, fft_size)
fft = gr.fft_vcc(fft_size, True, [])
argmax = gr.argmax_fs(fft_size)
max = gr.max_ff(fft_size)
self.connect( self, s2v, fft)
self.connect( (argmax, 0),
gr.short_to_float(),
(self, 0))
self.connect( (argmax,1),
gr.short_to_float(),
gr.add_const_ff(-fd_range),
gr.multiply_const_ff(1e3),
(self,1))
self.connect( max, (self, 2))
# Connect the individual channels to the input and the output.
self.correlators = [ single_channel_correlator( fs, fd, svn, alpha, dump_bins) for fd in doppler_range ]
for (correlator, i) in zip( self.correlators, range(len(self.correlators))):
self.connect( fft, correlator )
self.connect( correlator, (argmax, i) )
self.connect( correlator, (max, i) )
def __init__(self, fs, svn, alpha, fd_range, dump_bins=False):
gr.hier_block2.__init__(self, "acquisition",
gr.io_signature(1, 1, gr.sizeof_gr_complex),
gr.io_signature(3, 3, gr.sizeof_float))
fft_size = int(1e-3 * fs)
doppler_range = self.get_doppler_range(fd_range)
agc = gr.agc_cc(1.0 / fs, 1.0, 1.0, 1.0)
s2v = gr.stream_to_vector(gr.sizeof_gr_complex, fft_size)
fft = gr.fft_vcc(fft_size, True, [])
argmax = gr.argmax_fs(fft_size)
max = gr.max_ff(fft_size)
self.connect(self, s2v, fft)
self.connect((argmax, 0), gr.short_to_float(), (self, 0))
self.connect((argmax, 1), gr.short_to_float(),
gr.add_const_ff(-fd_range), gr.multiply_const_ff(1e3),
(self, 1))
self.connect(max, (self, 2))
# Connect the individual channels to the input and the output.
self.correlators = [
single_channel_correlator(fs, fd, svn, alpha, dump_bins)
for fd in doppler_range
]
for (correlator, i) in zip(self.correlators,
range(len(self.correlators))):
self.connect(fft, correlator)
self.connect(correlator, (argmax, i))
self.connect(correlator, (max, i))
def __init__(self, options):
gr.hier_block2.__init__(self, "transmit_path",
gr.io_signature(0, 0, 0),
gr.io_signature(0, 0, 0))
#Set up usrp block
self.u = usrp.source_c()
adc_rate = self.u.adc_rate() # 64 MS/s
usrp_decim = 16
gain = 65
self.u.set_decim_rate(usrp_decim)
usrp_rate = adc_rate / usrp_decim # 320 kS/s
print usrp_rate
#subdev_spec = usrp.pick_subdev(self.u)
subdev_spec = (0, 0)
mux_value = usrp.determine_rx_mux_value(self.u, subdev_spec)
self.u.set_mux(mux_value)
self.subdev = usrp.selected_subdev(self.u, subdev_spec)
self.subdev.set_gain(gain)
self.subdev.set_auto_tr(False)
self.subdev.set_enable(True)
if not (self.set_freq(915e6)):
print "Failed to set initial frequency"
#set up the rest of the path
deci = 1
self.agc = gr.agc_cc(rate=1e-7,
reference=1.0,
gain=0.001,
max_gain=0.5)
matchtaps = [complex(-1, -1)] * 8 + [complex(
1, 1)] * 8 + [complex(-1, -1)] * 8 + [complex(1, 1)] * 8
#matchtaps = [complex(-1,-1)] * 8 + [complex(1,1)] * 8
self.matchfilter = gr.fir_filter_ccc(1, matchtaps)
reverse = [complex(1, 1)] * (8 / deci) + [complex(
-1, -1)] * (8 / deci) + [complex(
1, 1)] * (8 / deci) + [complex(-1, -1)] * (8 / deci)
#pretaps = matchtaps * 3 + reverse * 4 + matchtaps * 4 + reverse * 8 + matchtaps * 6 + matchtaps * 62
pretaps = matchtaps * 2 + reverse * 2 + matchtaps * 2 + reverse * 4 + matchtaps * 3 + matchtaps * 31
#pretaps = matchtaps * 3 + reverse * 8 + matchtaps * 6 + matchtaps * 64
self.preamble_filter = gr.fir_filter_ccc(1, pretaps)
self.c_f = gr.complex_to_real()
self.c_f2 = gr.complex_to_real()
self.lock = howto.lock_time(32, 5, 32)
self.pd = howto.find_pre_ff(55, 200)
self.dec = symbols_decoder()
self.vect = gr.vector_sink_f()
#self.connect(self.u, self.agc, self.matchfilter, self.c_f, (self.lock, 0), self.dec, self.vect)
#self.connect(self.agc, self.preamble_filter, self.c_f2, self.pd, (self.lock, 1))
self.connect(self.u, self.agc, self.matchfilter, self.c_f, self.vect)
def __init__(self, options):
gr.hier_block2.__init__(self, "transmit_path",
gr.io_signature(0, 0, 0),
gr.io_signature(0, 0, 0))
#Set up usrp block
self.u = usrp.source_c()
adc_rate = self.u.adc_rate() # 64 MS/s
usrp_decim = 16
gain = 65
self.u.set_decim_rate(usrp_decim)
usrp_rate = adc_rate / usrp_decim # 320 kS/s
print usrp_rate
#subdev_spec = usrp.pick_subdev(self.u)
subdev_spec = (0,0)
mux_value = usrp.determine_rx_mux_value(self.u, subdev_spec)
self.u.set_mux(mux_value)
self.subdev = usrp.selected_subdev(self.u, subdev_spec)
self.subdev.set_gain(gain)
self.subdev.set_auto_tr(False)
self.subdev.set_enable(True)
if not(self.set_freq(915e6)):
print "Failed to set initial frequency"
#set up the rest of the path
deci = 1
self.agc = gr.agc_cc( rate = 1e-7, reference = 1.0, gain = 0.001, max_gain = 0.5)
matchtaps = [complex(-1,-1)] * 8 + [complex(1,1)] * 8 + [complex(-1,-1)]* 8 + [complex(1,1)]* 8
#matchtaps = [complex(-1,-1)] * 8 + [complex(1,1)] * 8
self.matchfilter = gr.fir_filter_ccc(1, matchtaps)
reverse = [complex(1,1)] * (8 / deci) + [complex(-1,-1)] * (8 / deci) + [complex(1,1)]* (8 / deci) + [complex(-1,-1)]* (8 / deci)
#pretaps = matchtaps * 3 + reverse * 4 + matchtaps * 4 + reverse * 8 + matchtaps * 6 + matchtaps * 62
pretaps = matchtaps * 2 + reverse * 2 + matchtaps * 2 + reverse * 4 + matchtaps * 3 + matchtaps * 31
#pretaps = matchtaps * 3 + reverse * 8 + matchtaps * 6 + matchtaps * 64
self.preamble_filter = gr.fir_filter_ccc(1, pretaps)
self.c_f = gr.complex_to_real()
self.c_f2 = gr.complex_to_real()
self.lock = howto.lock_time(32, 5, 32)
self.pd = howto.find_pre_ff(55, 200)
self.dec = symbols_decoder()
self.vect = gr.vector_sink_f()
#self.connect(self.u, self.agc, self.matchfilter, self.c_f, (self.lock, 0), self.dec, self.vect)
#self.connect(self.agc, self.preamble_filter, self.c_f2, self.pd, (self.lock, 1))
self.connect(self.u, self.agc, self.matchfilter, self.c_f, self.vect)
def __init__(self):
gr.hier_block2.__init__(self,
"proto_transceiver",
gr.io_signature(1, 1, gr.sizeof_gr_complex),
gr.io_signature(1, 1, gr.sizeof_gr_complex))
#file sinks for debugging
self.agc_out = gr.file_sink(itemsize = gr.sizeof_gr_complex,
filename = "agc.dat")
#########################
#uplink blocks
q_encoder = gr.msg_queue(100)
self.tx_encoder = rfidbts.pie_encoder(samples_per_delimiter = 8,
samples_per_tari = 16,
samples_per_pw = 8,
samples_per_trcal = 53,
samples_per_data1 = 32)
self.tx_encoder.set_encoder_queue(q_encoder)
rfidbts.cvar.rfid_mac.set_encoder_queue(q_encoder)
####################################
#downlink blocks
q_blocker = gr.msg_queue(100)
frame_size_rn16 = int((32 + 32 + 12) * 8 + int(75*0.4*1.024))
self.TX_blocker = rfidbts.receive_gate(threshold = 0.15, #bit above the noise floor
off_max = 15) #should not be in the off state for more than 13 us
self.TX_blocker.set_gate_queue(q_blocker)
rfidbts.cvar.rfid_mac.set_gate_queue(q_blocker)
self.blocker = gr.dc_blocker_cc(D = 5,
long_form = True)
self.agc = gr.agc_cc(rate = 5e-1,
reference = 0.707,
gain = 100.0,
max_gain = 1000.0)
self.search = preamble_search(frame_size_rn16)
self.half_symbols = symbol_mapper()
# self.decoder = binary_diff_decoder()
self.decoder = rfidbts.orthogonal_decode()
self.framer = rfidbts.packetizer()
#frame the rn16 and send to message queue
#####################################
#connect uplink
self.connect(self.tx_encoder, self)
#####################################
#connect downlink
self.connect(self,
self.TX_blocker,
self.blocker,
self.agc,
self.search,
self.half_symbols,
self.decoder,
self.framer)
self.connect(self.agc, self.agc_out)
def __init__(self, principal_gui, options):
gr.hier_block2.__init__(self, "bpsk_demod",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature
#Enter the parameters of modulation
self._samples_per_symbol = options.samples_per_symbol
self.verbose = options.verbose
self._gray_code =_def_gray_code
if self._samples_per_symbol < 2:
raise TypeError, "samples_per_symbol must be >= 2, is %r" % (self._samples_per_symbol,)
arity = pow(2,self.bits_per_symbol())
# Automatic gain control
#self.agc = gr.agc2_cc(0.6e-1, 1e-3, 1, 1, 100)
self.agc = gr.agc_cc(1e-5, 1.0,1.0,1.0)
#self.agc = gr.feedforward_agc_cc(16, 2.0)
# RRC data filter
ntaps = 11 * self._samples_per_symbol
self.rrc_taps = gr.firdes.root_raised_cosine(
1.0, # gain
self._samples_per_symbol, # sampling rate
1.0, # symbol rate
0.35, # excess bandwidth (roll-off factor)
ntaps)
self.rrc_filter=gr.interp_fir_filter_ccf(1, self.rrc_taps)
self._costas = digital.costas_loop_cc(6.28/100.0, 2)
self.gr_null_sink = gr.null_sink(gr.sizeof_float*1)
self.connect((self._costas, 1), (self.gr_null_sink, 0))
self._mm = digital.clock_recovery_mm_cc(self._samples_per_symbol, # Initial samples/symbol
1e-06, # Second order gain
0.5, # Initial symbol phase
0.001, # First order gain
0.0001) # Maximum timing offset
if self.verbose:
self._print_verbage()
# Do differential decoding based on phase change of symbols
#self.diffdec = gr.diff_phasor_cc()
# Connect and Initialize base class
self.connect(self, self.agc, self.rrc_filter, (self._costas,0), self._mm, self)
def __init__(self, input_filename="usrp.dat", output_filename="frames.dat", decim=32, pll_alpha=0.01, clock_alpha=0.01): gr.top_block.__init__(self, "Hrpt Demod") ################################################## # Parameters ################################################## self.input_filename = input_filename self.output_filename = output_filename self.decim = decim self.pll_alpha = pll_alpha self.clock_alpha = clock_alpha ################################################## # Variables ################################################## self.sym_rate = sym_rate = 600*1109 self.sample_rate = sample_rate = 4e6 self.sps = sps = sample_rate/sym_rate self.max_clock_offset = max_clock_offset = 100e-6 self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate self.hs = hs = int(sps/2.0) ################################################## # Blocks ################################################## self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset) self.noaa_hrpt_deframer_0 = noaa.hrpt_deframer() self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000) self.gr_file_sink_0 = gr.file_sink(gr.sizeof_short*1, output_filename) self.gr_file_sink_0.set_unbuffered(False) self.file_source = gr.file_source(gr.sizeof_short*1, input_filename, False) self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset) self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb() self.decoder = noaa.hrpt_decoder(True,False) self.cs2cf = gr.interleaved_short_to_complex() self.agc = gr.agc_cc(1e-5, 1.0, 1.0/32768.0, 1.0) ################################################## # Connections ################################################## self.connect((self.file_source, 0), (self.cs2cf, 0)) self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0)) self.connect((self.cs2cf, 0), (self.agc, 0)) self.connect((self.agc, 0), (self.pll, 0)) self.connect((self.noaa_hrpt_deframer_0, 0), (self.gr_file_sink_0, 0)) self.connect((self.noaa_hrpt_deframer_0, 0), (self.decoder, 0)) self.connect((self.gr_moving_average_xx_0, 0), (self.digital_clock_recovery_mm_xx_0, 0)) self.connect((self.digital_clock_recovery_mm_xx_0, 0), (self.digital_binary_slicer_fb_0, 0)) self.connect((self.digital_binary_slicer_fb_0, 0), (self.noaa_hrpt_deframer_0, 0))
def __init__(self):
gr.hier_block2.__init__(self, "proto_transceiver",
gr.io_signature(1, 1, gr.sizeof_gr_complex),
gr.io_signature(1, 1, gr.sizeof_gr_complex))
#file sinks for debugging
self.agc_out = gr.file_sink(itemsize=gr.sizeof_gr_complex,
filename="agc.dat")
#########################
#uplink blocks
q_encoder = gr.msg_queue(100)
self.tx_encoder = rfidbts.pie_encoder(samples_per_delimiter=8,
samples_per_tari=16,
samples_per_pw=8,
samples_per_trcal=53,
samples_per_data1=32)
self.tx_encoder.set_encoder_queue(q_encoder)
rfidbts.cvar.rfid_mac.set_encoder_queue(q_encoder)
####################################
#downlink blocks
q_blocker = gr.msg_queue(100)
frame_size_rn16 = int((32 + 32 + 12) * 8 + int(75 * 0.4 * 1.024))
self.TX_blocker = rfidbts.receive_gate(
threshold=0.15, #bit above the noise floor
off_max=15) #should not be in the off state for more than 13 us
self.TX_blocker.set_gate_queue(q_blocker)
rfidbts.cvar.rfid_mac.set_gate_queue(q_blocker)
self.blocker = gr.dc_blocker_cc(D=5, long_form=True)
self.agc = gr.agc_cc(rate=5e-1,
reference=0.707,
gain=100.0,
max_gain=1000.0)
self.search = preamble_search(frame_size_rn16)
self.half_symbols = symbol_mapper()
# self.decoder = binary_diff_decoder()
self.decoder = rfidbts.orthogonal_decode()
self.framer = rfidbts.packetizer()
#frame the rn16 and send to message queue
#####################################
#connect uplink
self.connect(self.tx_encoder, self)
#####################################
#connect downlink
self.connect(self, self.TX_blocker, self.blocker, self.agc,
self.search, self.half_symbols, self.decoder, self.framer)
self.connect(self.agc, self.agc_out)
def __init__(self, options):
gr.top_block.__init__(self)
self.options = options
(dev_rate, channel_rate, audio_rate,
channel_pass, channel_stop, demod) = demod_params[options.modulation]
DEV = uhd_src(options.args, # UHD device address
options.spec, # device subdev spec
options.antenna, # device antenna
dev_rate, # device sample rate
options.gain, # Receiver gain
options.calibration) # Frequency offset
DEV.tune(options.frequency)
if_rate = DEV.rate()
channel_decim = int(if_rate // channel_rate)
audio_decim = int(channel_rate // audio_rate)
CHAN_taps = optfir.low_pass(1.0, # Filter gain
if_rate, # Sample rate
channel_pass, # One sided modulation bandwidth
channel_stop, # One sided channel bandwidth
0.1, # Passband ripple
60) # Stopband attenuation
CHAN = gr.freq_xlating_fir_filter_ccf(channel_decim, # Decimation rate
CHAN_taps, # Filter taps
0.0, # Offset frequency
if_rate) # Sample rate
RFSQL = gr.pwr_squelch_cc(options.rf_squelch, # Power threshold
125.0/channel_rate, # Time constant
int(channel_rate/20), # 50ms rise/fall
False) # Zero, not gate output
AGC = gr.agc_cc(1.0/channel_rate, # Time constant
1.0, # Reference power
1.0, # Initial gain
1.0) # Maximum gain
DEMOD = demod(channel_rate, audio_decim)
# From RF to audio
#self.connect(DEV, CHAN, RFSQL, AGC, DEMOD)
self.connect(DEV, CHAN, DEMOD)
# Optionally add CTCSS and RSAMP if needed
tail = DEMOD
if options.ctcss != None and options.ctcss > 60.0:
CTCSS = gr.ctcss_squelch_ff(audio_rate, # Sample rate
options.ctcss) # Squelch tone
self.connect(DEMOD, CTCSS)
tail = CTCSS
if options.output_rate != audio_rate:
out_lcm = gru.lcm(audio_rate, options.output_rate)
out_interp = int(out_lcm // audio_rate)
out_decim = int(out_lcm // options.output_rate)
RSAMP = blks2.rational_resampler_fff(out_interp, out_decim)
self.connect(tail, RSAMP)
tail = RSAMP
# Send to audio output device
AUDIO = audio.sink(int(options.output_rate),
options.audio_output)
self.connect(tail, AUDIO)
# Direct asynchronous notifications to callback function
if self.options.show_async_msg:
self.async_msgq = gr.msg_queue(0)
self.async_src = uhd.amsg_source("", self.async_msgq)
self.async_rcv = gru.msgq_runner(self.async_msgq, self.async_callback)
def __init__(self, devid="type=b100", rdsfile="rds_fifo", gain=35.0, freq=101.1e6, xmlport=13777, arate=int(48e3), mute=-15.0, ftune=0, ant="J1", subdev="A:0", ahw="pulse", deemph=75.0e-6, prenames='["UWRF","89.3","950","WEVR"]', prefreqs="[88.715e6,89.3e6,950.735e6,106.317e6]", volume=1.0):
grc_wxgui.top_block_gui.__init__(self, title="Simple FM (Stereo) Receiver")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.devid = devid
self.rdsfile = rdsfile
self.gain = gain
self.freq = freq
self.xmlport = xmlport
self.arate = arate
self.mute = mute
self.ftune = ftune
self.ant = ant
self.subdev = subdev
self.ahw = ahw
self.deemph = deemph
self.prenames = prenames
self.prefreqs = prefreqs
self.volume = volume
##################################################
# Variables
##################################################
self.pthresh = pthresh = 350
self.preselect = preselect = eval(prefreqs)[0]
self.pilot_level = pilot_level = 0
self.ifreq = ifreq = freq
self.stpilotdet = stpilotdet = True if (pilot_level > pthresh) else False
self.stereo = stereo = True
self.rf_pwr_lvl = rf_pwr_lvl = 0
self.cur_freq = cur_freq = simple_fm_helper.freq_select(ifreq,preselect)
self.vol = vol = volume
self.variable_static_text_0 = variable_static_text_0 = 10.0*math.log(rf_pwr_lvl+1.0e-11)/math.log(10)
self.tone_med = tone_med = 5
self.tone_low = tone_low = 5
self.tone_high = tone_high = 5
self.stereo_0 = stereo_0 = stpilotdet
self.st_enabled = st_enabled = 1 if (stereo == True and pilot_level > pthresh) else 0
self.squelch_probe = squelch_probe = 0
self.sq_thresh = sq_thresh = mute
self.samp_rate = samp_rate = 250e3
self.rtext_0 = rtext_0 = cur_freq
self.record = record = False
self.rdsrate = rdsrate = 25e3
self.osmo_taps = osmo_taps = firdes.low_pass(1.0,1.00e6,95e3,20e3,firdes.WIN_HAMMING,6.76)
self.mod_reset = mod_reset = 0
self.igain = igain = gain
self.fine = fine = ftune
self.farate = farate = arate
self.dm = dm = deemph
self.discrim_dc = discrim_dc = 0
self.capture_file = capture_file = "capture.wav"
self.asrate = asrate = 125e3
##################################################
# Blocks
##################################################
_sq_thresh_sizer = wx.BoxSizer(wx.VERTICAL)
self._sq_thresh_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_sq_thresh_sizer,
value=self.sq_thresh,
callback=self.set_sq_thresh,
label="Mute Level",
converter=forms.float_converter(),
proportion=0,
)
self._sq_thresh_slider = forms.slider(
parent=self.GetWin(),
sizer=_sq_thresh_sizer,
value=self.sq_thresh,
callback=self.set_sq_thresh,
minimum=-30.0,
maximum=-5.0,
num_steps=40,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_sq_thresh_sizer, 1, 5, 1, 1)
self.input_power = gr.probe_avg_mag_sqrd_c(sq_thresh, 1.0/(samp_rate/10))
self.dc_level = gr.probe_signal_f()
_vol_sizer = wx.BoxSizer(wx.VERTICAL)
self._vol_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_vol_sizer,
value=self.vol,
callback=self.set_vol,
label="Volume",
converter=forms.float_converter(),
proportion=0,
)
self._vol_slider = forms.slider(
parent=self.GetWin(),
sizer=_vol_sizer,
value=self.vol,
callback=self.set_vol,
minimum=0,
maximum=11,
num_steps=110,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_vol_sizer, 0, 3, 1, 1)
_tone_med_sizer = wx.BoxSizer(wx.VERTICAL)
self._tone_med_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_tone_med_sizer,
value=self.tone_med,
callback=self.set_tone_med,
label="1Khz-4Khz",
converter=forms.float_converter(),
proportion=0,
)
self._tone_med_slider = forms.slider(
parent=self.GetWin(),
sizer=_tone_med_sizer,
value=self.tone_med,
callback=self.set_tone_med,
minimum=0,
maximum=10,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_tone_med_sizer, 1, 3, 1, 1)
_tone_low_sizer = wx.BoxSizer(wx.VERTICAL)
self._tone_low_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_tone_low_sizer,
value=self.tone_low,
callback=self.set_tone_low,
label="0-1Khz",
converter=forms.float_converter(),
proportion=0,
)
self._tone_low_slider = forms.slider(
parent=self.GetWin(),
sizer=_tone_low_sizer,
value=self.tone_low,
callback=self.set_tone_low,
minimum=0,
maximum=10,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_tone_low_sizer, 1, 2, 1, 1)
_tone_high_sizer = wx.BoxSizer(wx.VERTICAL)
self._tone_high_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_tone_high_sizer,
value=self.tone_high,
callback=self.set_tone_high,
label="4Khz-15Khz",
converter=forms.float_converter(),
proportion=0,
)
self._tone_high_slider = forms.slider(
parent=self.GetWin(),
sizer=_tone_high_sizer,
value=self.tone_high,
callback=self.set_tone_high,
minimum=0,
maximum=10,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_tone_high_sizer, 1, 4, 1, 1)
def _squelch_probe_probe():
while True:
val = self.input_power.unmuted()
try: self.set_squelch_probe(val)
except AttributeError, e: pass
time.sleep(1.0/(10))
_squelch_probe_thread = threading.Thread(target=_squelch_probe_probe)
_squelch_probe_thread.daemon = True
_squelch_probe_thread.start()
self._record_check_box = forms.check_box(
parent=self.GetWin(),
value=self.record,
callback=self.set_record,
label="Record Audio",
true=True,
false=False,
)
self.GridAdd(self._record_check_box, 2, 2, 1, 1)
self.pilot_probe = gr.probe_signal_f()
_fine_sizer = wx.BoxSizer(wx.VERTICAL)
self._fine_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_fine_sizer,
value=self.fine,
callback=self.set_fine,
label="Fine Tuning",
converter=forms.float_converter(),
proportion=0,
)
self._fine_slider = forms.slider(
parent=self.GetWin(),
sizer=_fine_sizer,
value=self.fine,
callback=self.set_fine,
minimum=-50.0e3,
maximum=50.e03,
num_steps=400,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_fine_sizer, 1, 0, 1, 1)
def _discrim_dc_probe():
while True:
val = self.dc_level.level()
try: self.set_discrim_dc(val)
except AttributeError, e: pass
time.sleep(1.0/(2.5))
_discrim_dc_thread = threading.Thread(target=_discrim_dc_probe)
_discrim_dc_thread.daemon = True
_discrim_dc_thread.start()
self._capture_file_text_box = forms.text_box(
parent=self.GetWin(),
value=self.capture_file,
callback=self.set_capture_file,
label="Record Filename",
converter=forms.str_converter(),
)
self.GridAdd(self._capture_file_text_box, 2, 0, 1, 2)
self.Main = self.Main = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.Main.AddPage(grc_wxgui.Panel(self.Main), "L/R")
self.Main.AddPage(grc_wxgui.Panel(self.Main), "FM Demod Spectrum")
self.Add(self.Main)
self.wxgui_waterfallsink2_0 = waterfallsink2.waterfall_sink_c(
self.GetWin(),
baseband_freq=0,
dynamic_range=100,
ref_level=0,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=512,
fft_rate=15,
average=False,
avg_alpha=None,
title="Waterfall Plot",
)
self.Add(self.wxgui_waterfallsink2_0.win)
self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
self.Main.GetPage(0).GetWin(),
title="Audio Channels (L and R)",
sample_rate=farate,
v_scale=0,
v_offset=0,
t_scale=0,
ac_couple=False,
xy_mode=False,
num_inputs=2,
trig_mode=gr.gr_TRIG_MODE_AUTO,
y_axis_label="Rel. Audio Level",
)
self.Main.GetPage(0).Add(self.wxgui_scopesink2_0.win)
self.wxgui_fftsink2_0 = fftsink2.fft_sink_f(
self.Main.GetPage(1).GetWin(),
baseband_freq=0,
y_per_div=10,
y_divs=10,
ref_level=0,
ref_scale=2.0,
sample_rate=asrate,
fft_size=1024,
fft_rate=6,
average=True,
avg_alpha=0.1,
title="FM Demod Spectrum",
peak_hold=False,
)
self.Main.GetPage(1).Add(self.wxgui_fftsink2_0.win)
self._variable_static_text_0_static_text = forms.static_text(
parent=self.GetWin(),
value=self.variable_static_text_0,
callback=self.set_variable_static_text_0,
label="RF Power ",
converter=forms.float_converter(formatter=lambda x: "%4.1f" % x),
)
self.GridAdd(self._variable_static_text_0_static_text, 0, 2, 1, 1)
self._stereo_0_check_box = forms.check_box(
parent=self.GetWin(),
value=self.stereo_0,
callback=self.set_stereo_0,
label="Stereo Detect",
true=True,
false=False,
)
self.GridAdd(self._stereo_0_check_box, 2, 5, 1, 1)
self._stereo_check_box = forms.check_box(
parent=self.GetWin(),
value=self.stereo,
callback=self.set_stereo,
label="Stereo",
true=True,
false=False,
)
self.GridAdd(self._stereo_check_box, 2, 4, 1, 1)
self.rtl2832_source_0 = baz.rtl_source_c(defer_creation=True)
self.rtl2832_source_0.set_verbose(True)
self.rtl2832_source_0.set_vid(0x0)
self.rtl2832_source_0.set_pid(0x0)
self.rtl2832_source_0.set_tuner_name("")
self.rtl2832_source_0.set_default_timeout(0)
self.rtl2832_source_0.set_use_buffer(True)
self.rtl2832_source_0.set_fir_coefficients(([]))
if self.rtl2832_source_0.create() == False: raise Exception("Failed to create RTL2832 Source: rtl2832_source_0")
self.rtl2832_source_0.set_sample_rate(1.0e6)
self.rtl2832_source_0.set_frequency(cur_freq+200e3)
self.rtl2832_source_0.set_auto_gain_mode(False)
self.rtl2832_source_0.set_relative_gain(True)
self.rtl2832_source_0.set_gain(gain)
self._rtext_0_static_text = forms.static_text(
parent=self.GetWin(),
value=self.rtext_0,
callback=self.set_rtext_0,
label="CURRENT FREQUENCY>>",
converter=forms.float_converter(),
)
self.GridAdd(self._rtext_0_static_text, 0, 1, 1, 1)
def _rf_pwr_lvl_probe():
while True:
val = self.input_power.level()
try: self.set_rf_pwr_lvl(val)
except AttributeError, e: pass
time.sleep(1.0/(2))
_rf_pwr_lvl_thread = threading.Thread(target=_rf_pwr_lvl_probe)
_rf_pwr_lvl_thread.daemon = True
_rf_pwr_lvl_thread.start()
self._preselect_chooser = forms.radio_buttons(
parent=self.GetWin(),
value=self.preselect,
callback=self.set_preselect,
label='preselect',
choices=eval(prefreqs),
labels=eval(prenames),
style=wx.RA_HORIZONTAL,
)
self.GridAdd(self._preselect_chooser, 0, 4, 1, 1)
def _pilot_level_probe():
while True:
val = self.pilot_probe.level()
try: self.set_pilot_level(val)
except AttributeError, e: pass
time.sleep(1.0/(5))
_pilot_level_thread = threading.Thread(target=_pilot_level_probe)
_pilot_level_thread.daemon = True
_pilot_level_thread.start()
self.low_pass_filter_3 = gr.fir_filter_fff(1, firdes.low_pass(
3, asrate/500, 10, 3, firdes.WIN_HAMMING, 6.76))
self.low_pass_filter_2 = gr.fir_filter_fff(10, firdes.low_pass(
3, asrate/50, 100, 30, firdes.WIN_HAMMING, 6.76))
self.low_pass_filter_1 = gr.fir_filter_fff(10, firdes.low_pass(
3, asrate/5, 1e3, 200, firdes.WIN_HAMMING, 6.76))
self.low_pass_filter_0 = gr.fir_filter_fff(5, firdes.low_pass(
3, asrate, 10e3, 2e3, firdes.WIN_HAMMING, 6.76))
_igain_sizer = wx.BoxSizer(wx.VERTICAL)
self._igain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_igain_sizer,
value=self.igain,
callback=self.set_igain,
label="RF Gain",
converter=forms.float_converter(),
proportion=0,
)
self._igain_slider = forms.slider(
parent=self.GetWin(),
sizer=_igain_sizer,
value=self.igain,
callback=self.set_igain,
minimum=0,
maximum=50,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_igain_sizer, 1, 1, 1, 1)
_ifreq_sizer = wx.BoxSizer(wx.VERTICAL)
self._ifreq_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_ifreq_sizer,
value=self.ifreq,
callback=self.set_ifreq,
label="Center Frequency",
converter=forms.float_converter(),
proportion=0,
)
self._ifreq_slider = forms.slider(
parent=self.GetWin(),
sizer=_ifreq_sizer,
value=self.ifreq,
callback=self.set_ifreq,
minimum=88.1e6,
maximum=108.1e6,
num_steps=200,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_ifreq_sizer, 0, 0, 1, 1)
self.gr_wavfile_sink_0 = gr.wavfile_sink("/dev/null" if record == False else capture_file, 2, int(farate), 16)
self.gr_sub_xx_0 = gr.sub_ff(1)
self.gr_single_pole_iir_filter_xx_1 = gr.single_pole_iir_filter_ff(2.5/(asrate/500), 1)
self.gr_single_pole_iir_filter_xx_0 = gr.single_pole_iir_filter_ff(1.0/(asrate/3), 1)
self.gr_multiply_xx_1 = gr.multiply_vff(1)
self.gr_multiply_xx_0_0 = gr.multiply_vff(1)
self.gr_multiply_xx_0 = gr.multiply_vff(1)
self.gr_multiply_const_vxx_3 = gr.multiply_const_vff((3.16e3 if st_enabled else 0, ))
self.gr_multiply_const_vxx_2 = gr.multiply_const_vff((1.0 if st_enabled else 1.414, ))
self.gr_multiply_const_vxx_1_0 = gr.multiply_const_vff((0 if st_enabled else 1, ))
self.gr_multiply_const_vxx_1 = gr.multiply_const_vff((0 if squelch_probe == 0 else 1.0, ))
self.gr_multiply_const_vxx_0_0 = gr.multiply_const_vff((vol*1.5*10.0, ))
self.gr_multiply_const_vxx_0 = gr.multiply_const_vff((vol*1.5*10.0 if st_enabled else 0, ))
self.gr_keep_one_in_n_0 = gr.keep_one_in_n(gr.sizeof_float*1, int(asrate/3))
self.gr_freq_xlating_fir_filter_xxx_0 = gr.freq_xlating_fir_filter_ccc(4, (osmo_taps), 200e3+fine+(-12e3*discrim_dc), 1.0e6)
self.gr_fractional_interpolator_xx_0_0 = gr.fractional_interpolator_ff(0, asrate/farate)
self.gr_fractional_interpolator_xx_0 = gr.fractional_interpolator_ff(0, asrate/farate)
self.gr_fft_filter_xxx_1_0_0 = gr.fft_filter_fff(1, (firdes.band_pass(tone_high/10.0,asrate,3.5e3,15.0e3,5.0e3,firdes.WIN_HAMMING)), 1)
self.gr_fft_filter_xxx_1_0 = gr.fft_filter_fff(1, (firdes.band_pass(tone_med/10.0,asrate,1.0e3,4.0e3,2.0e3,firdes.WIN_HAMMING)), 1)
self.gr_fft_filter_xxx_1 = gr.fft_filter_fff(1, (firdes.low_pass(tone_low/10.0,asrate,1.2e3,500,firdes.WIN_HAMMING)), 1)
self.gr_fft_filter_xxx_0_0_0 = gr.fft_filter_fff(1, (firdes.band_pass(tone_high/10.0,asrate,3.5e3,13.5e3,3.5e3,firdes.WIN_HAMMING)), 1)
self.gr_fft_filter_xxx_0_0 = gr.fft_filter_fff(1, (firdes.band_pass(tone_med/10.0,asrate,1.0e3,4.0e3,2.0e3,firdes.WIN_HAMMING)), 1)
self.gr_fft_filter_xxx_0 = gr.fft_filter_fff(1, (firdes.low_pass(tone_low/10.0,asrate,1.2e3,500,firdes.WIN_HAMMING)), 1)
self.gr_divide_xx_0 = gr.divide_ff(1)
self.gr_agc_xx_1 = gr.agc_cc(1e-2, 0.35, 1.0, 5000)
self.gr_add_xx_2_0 = gr.add_vff(1)
self.gr_add_xx_2 = gr.add_vff(1)
self.gr_add_xx_1 = gr.add_vff(1)
self.gr_add_xx_0 = gr.add_vff(1)
self.gr_add_const_vxx_0 = gr.add_const_vff((1.0e-7, ))
self._dm_chooser = forms.radio_buttons(
parent=self.GetWin(),
value=self.dm,
callback=self.set_dm,
label="FM Deemphasis",
choices=[75.0e-6, 50.0e-6],
labels=["NA", "EU"],
style=wx.RA_HORIZONTAL,
)
self.GridAdd(self._dm_chooser, 0, 5, 1, 1)
self.blks2_wfm_rcv_0 = blks2.wfm_rcv(
quad_rate=samp_rate,
audio_decimation=2,
)
self.blks2_fm_deemph_0_0 = blks2.fm_deemph(fs=farate, tau=deemph)
self.blks2_fm_deemph_0 = blks2.fm_deemph(fs=farate, tau=deemph)
self.band_pass_filter_2_0 = gr.fir_filter_fff(1, firdes.band_pass(
20, asrate, 17.5e3, 17.9e3, 250, firdes.WIN_HAMMING, 6.76))
self.band_pass_filter_2 = gr.fir_filter_fff(1, firdes.band_pass(
10, asrate, 18.8e3, 19.2e3, 350, firdes.WIN_HAMMING, 6.76))
self.band_pass_filter_0_0 = gr.fir_filter_fff(1, firdes.band_pass(
1, asrate, 38e3-(15e3), 38e3+(15e3), 4.0e3, firdes.WIN_HAMMING, 6.76))
self.audio_sink_0 = audio.sink(int(farate), "" if ahw == "Default" else ahw, True)
##################################################
# Connections
##################################################
self.connect((self.gr_add_xx_1, 0), (self.gr_fractional_interpolator_xx_0, 0))
self.connect((self.gr_sub_xx_0, 0), (self.gr_fractional_interpolator_xx_0_0, 0))
self.connect((self.band_pass_filter_0_0, 0), (self.gr_multiply_xx_1, 0))
self.connect((self.gr_multiply_const_vxx_1_0, 0), (self.gr_add_xx_0, 0))
self.connect((self.band_pass_filter_2_0, 0), (self.gr_multiply_xx_0, 0))
self.connect((self.band_pass_filter_2_0, 0), (self.gr_multiply_xx_0, 1))
self.connect((self.gr_multiply_xx_0_0, 0), (self.gr_divide_xx_0, 0))
self.connect((self.gr_divide_xx_0, 0), (self.gr_single_pole_iir_filter_xx_0, 0))
self.connect((self.gr_multiply_xx_0, 0), (self.gr_add_const_vxx_0, 0))
self.connect((self.gr_add_const_vxx_0, 0), (self.gr_divide_xx_0, 1))
self.connect((self.gr_single_pole_iir_filter_xx_0, 0), (self.gr_keep_one_in_n_0, 0))
self.connect((self.gr_keep_one_in_n_0, 0), (self.pilot_probe, 0))
self.connect((self.band_pass_filter_2, 0), (self.gr_multiply_xx_1, 2))
self.connect((self.band_pass_filter_2, 0), (self.gr_multiply_xx_0_0, 0))
self.connect((self.gr_multiply_const_vxx_2, 0), (self.gr_add_xx_1, 0))
self.connect((self.gr_multiply_const_vxx_2, 0), (self.gr_sub_xx_0, 0))
self.connect((self.gr_multiply_const_vxx_3, 0), (self.gr_sub_xx_0, 1))
self.connect((self.gr_multiply_const_vxx_3, 0), (self.gr_add_xx_1, 1))
self.connect((self.gr_fractional_interpolator_xx_0, 0), (self.gr_multiply_const_vxx_0_0, 0))
self.connect((self.gr_fractional_interpolator_xx_0_0, 0), (self.gr_multiply_const_vxx_0, 0))
self.connect((self.band_pass_filter_2, 0), (self.gr_multiply_xx_1, 1))
self.connect((self.gr_multiply_xx_1, 0), (self.gr_fft_filter_xxx_0, 0))
self.connect((self.gr_fft_filter_xxx_1, 0), (self.gr_add_xx_2, 0))
self.connect((self.gr_fft_filter_xxx_1_0, 0), (self.gr_add_xx_2, 1))
self.connect((self.gr_fft_filter_xxx_1_0_0, 0), (self.gr_add_xx_2, 2))
self.connect((self.gr_add_xx_2, 0), (self.gr_multiply_const_vxx_2, 0))
self.connect((self.gr_add_xx_2_0, 0), (self.gr_multiply_const_vxx_3, 0))
self.connect((self.gr_fft_filter_xxx_0, 0), (self.gr_add_xx_2_0, 0))
self.connect((self.gr_fft_filter_xxx_0_0, 0), (self.gr_add_xx_2_0, 1))
self.connect((self.gr_multiply_xx_1, 0), (self.gr_fft_filter_xxx_0_0, 0))
self.connect((self.gr_fft_filter_xxx_0_0_0, 0), (self.gr_add_xx_2_0, 2))
self.connect((self.gr_multiply_xx_1, 0), (self.gr_fft_filter_xxx_0_0_0, 0))
self.connect((self.blks2_fm_deemph_0, 0), (self.gr_multiply_const_vxx_1_0, 0))
self.connect((self.blks2_fm_deemph_0, 0), (self.gr_wavfile_sink_0, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.gr_fft_filter_xxx_1, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.gr_fft_filter_xxx_1_0, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.gr_fft_filter_xxx_1_0_0, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.wxgui_fftsink2_0, 0))
self.connect((self.gr_multiply_const_vxx_0_0, 0), (self.blks2_fm_deemph_0, 0))
self.connect((self.gr_add_xx_0, 0), (self.audio_sink_0, 1))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.blks2_fm_deemph_0_0, 0))
self.connect((self.blks2_fm_deemph_0_0, 0), (self.gr_add_xx_0, 1))
self.connect((self.band_pass_filter_2, 0), (self.gr_multiply_xx_0_0, 1))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.band_pass_filter_2, 0))
self.connect((self.blks2_fm_deemph_0, 0), (self.audio_sink_0, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.band_pass_filter_2_0, 0))
self.connect((self.gr_multiply_const_vxx_1, 0), (self.band_pass_filter_0_0, 0))
self.connect((self.gr_add_xx_0, 0), (self.gr_wavfile_sink_0, 1))
self.connect((self.blks2_fm_deemph_0, 0), (self.wxgui_scopesink2_0, 0))
self.connect((self.gr_add_xx_0, 0), (self.wxgui_scopesink2_0, 1))
self.connect((self.blks2_wfm_rcv_0, 0), (self.gr_multiply_const_vxx_1, 0))
self.connect((self.gr_agc_xx_1, 0), (self.blks2_wfm_rcv_0, 0))
self.connect((self.gr_freq_xlating_fir_filter_xxx_0, 0), (self.gr_agc_xx_1, 0))
self.connect((self.gr_freq_xlating_fir_filter_xxx_0, 0), (self.input_power, 0))
self.connect((self.blks2_wfm_rcv_0, 0), (self.low_pass_filter_0, 0))
self.connect((self.low_pass_filter_0, 0), (self.low_pass_filter_1, 0))
self.connect((self.low_pass_filter_1, 0), (self.low_pass_filter_2, 0))
self.connect((self.low_pass_filter_2, 0), (self.low_pass_filter_3, 0))
self.connect((self.gr_single_pole_iir_filter_xx_1, 0), (self.dc_level, 0))
self.connect((self.low_pass_filter_3, 0), (self.gr_single_pole_iir_filter_xx_1, 0))
self.connect((self.rtl2832_source_0, 0), (self.gr_freq_xlating_fir_filter_xxx_0, 0))
self.connect((self.gr_freq_xlating_fir_filter_xxx_0, 0), (self.wxgui_waterfallsink2_0, 0))
def __init__(self):
gr.top_block.__init__(self)
usage=("%prog: [options] output_filename.\nSpecial output_filename" + \
"\"sdl\" will use video_sink_sdl as realtime output window. " + \
"You then need to have gr-video-sdl installed.\n" +\
"Make sure your input capture file containes interleaved " + \
"shorts not complex floats")
parser = OptionParser(option_class=eng_option, usage=usage)
parser.add_option("-a", "--args", type="string", default="",
help="UHD device address args [default=%default]")
parser.add_option("", "--spec", type="string", default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A", "--antenna", type="string", default=None,
help="select Rx Antenna where appropriate")
parser.add_option("-s", "--samp-rate", type="eng_float", default=1e6,
help="set sample rate")
parser.add_option("-c", "--contrast", type="eng_float", default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b", "--brightness", type="eng_float", default=0.0,
help="set brightness (default is 0)")
parser.add_option("-i", "--in-filename", type="string", default=None,
help="Use input file as source. samples must be " + \
"interleaved shorts \n Use usrp_rx_file.py or " + \
"usrp_rx_cfile.py --output-shorts.\n Special " + \
"name \"usrp\" results in realtime capturing " + \
"and processing using usrp.\n" + \
"You then probably need a decimation factor of 64 or higher.")
parser.add_option("-f", "--freq", type="eng_float", default=519.25e6,
help="set frequency to FREQ.\nNote that the frequency of the video carrier is not at the middle of the TV channel", metavar="FREQ")
parser.add_option("-g", "--gain", type="eng_float", default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-p", "--pal", action="store_true", default=False,
help="PAL video format (this is the default)")
parser.add_option("-n", "--ntsc", action="store_true", default=False,
help="NTSC video format")
parser.add_option("-r", "--repeat", action="store_false", default=True,
help="repeat in_file in a loop")
parser.add_option("-N", "--nframes", type="eng_float", default=None,
help="number of frames to collect [default=+inf]")
parser.add_option("", "--freq-min", type="eng_float", default=50.25e6,
help="Set a minimum frequency [default=%default]")
parser.add_option("", "--freq-max", type="eng_float", default=900.25e6,
help="Set a maximum frequency [default=%default]")
(options, args) = parser.parse_args ()
if not (len(args) == 1):
parser.print_help()
sys.stderr.write('You must specify the output. FILENAME or sdl \n');
sys.exit(1)
filename = args[0]
self.tv_freq_min = options.freq_min
self.tv_freq_max = options.freq_max
if options.in_filename is None:
parser.print_help()
sys.stderr.write('You must specify the input -i FILENAME or -i usrp\n');
raise SystemExit, 1
if not (filename=="sdl"):
options.repeat=False
input_rate = options.samp_rate
print "video sample rate %s" % (eng_notation.num_to_str(input_rate))
if not (options.in_filename=="usrp"):
# file is data source, capture with usr_rx_csfile.py
self.filesource = gr.file_source(gr.sizeof_short,
options.in_filename,
options.repeat)
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource,self.istoc)
self.src=self.istoc
else:
if options.freq is None:
parser.print_help()
sys.stderr.write('You must specify the frequency with -f FREQ\n');
raise SystemExit, 1
# build the graph
self.u = uhd.usrp_source(device_addr=options.args, stream_args=uhd.stream_args('fc32'))
# Set the subdevice spec
if(options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if(options.antenna):
self.u.set_antenna(options.antenna, 0)
self.u.set_samp_rate(input_rate)
dev_rate = self.u.get_samp_rate()
self.src=self.u
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.u.get_gain_range()
options.gain = float(g.start()+g.stop())/2.0
self.u.set_gain(options.gain)
r = self.u.set_center_freq(options.freq)
if not r:
sys.stderr.write('Failed to set frequency\n')
raise SystemExit, 1
self.agc = gr.agc_cc(1e-7,1.0,1.0) #1e-7
self.am_demod = gr.complex_to_mag ()
self.set_blacklevel = gr.add_const_ff(options.brightness +255.0)
self.invert_and_scale = gr.multiply_const_ff (-options.contrast *128.0*255.0/(200.0))
self.f2uc = gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal=True #set default to PAL
if options.pal:
lines_per_frame=625.0
frames_per_sec=25.0
show_width=768
elif options.ntsc:
lines_per_frame=525.0
frames_per_sec=29.97002997
show_width=640
width=int(input_rate/(lines_per_frame*frames_per_sec))
height=int(lines_per_frame)
if filename=="sdl":
#Here comes the tv screen, you have to build and install
#gr-video-sdl for this (subproject of gnuradio, only in cvs
#for now)
try:
video_sink = video_sdl.sink_uc(frames_per_sec, width, height, 0,
show_width,height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst=video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " +str(width)+ "x" + str(height) + " gray:" +filename
print "(Use the spacebar to advance to next frames)"
file_sink=gr.file_sink(gr.sizeof_char, filename)
self.dst =file_sink
if options.nframes is None:
self.connect(self.src, self.agc)
else:
self.head = gr.head(gr.sizeof_gr_complex, int(options.nframes*width*height))
self.connect(self.src, self.head, self.agc)
self.connect (self.agc, self.am_demod, self.invert_and_scale,
self.set_blacklevel, self.f2uc, self.dst)
def __init__(self, gain=25, clock_alpha=0.005, pll_alpha=0.005, deframer_sync_check=True, deframer_insync_frames=2, deframer_outsync_frames=5, viterbi_sync_threshold=0.1, viterbi_sync_check=True, viterbi_insync_frames=5, viterbi_outsync_frames=20, satellite='MeteorMN1', decim=400, freq=137.1e6, frames_file=os.environ['HOME'] + '/meteor_lrpt_frames.cadu', baseband_file=os.environ['HOME'] + '/meteor_lrpt_baseband.dat', symb_rate=72e3):
grc_wxgui.top_block_gui.__init__(self, title="USRP2 MN1 LRPT Receiver")
##################################################
# Parameters
##################################################
self.gain = gain
self.clock_alpha = clock_alpha
self.pll_alpha = pll_alpha
self.deframer_sync_check = deframer_sync_check
self.deframer_insync_frames = deframer_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.viterbi_sync_threshold = viterbi_sync_threshold
self.viterbi_sync_check = viterbi_sync_check
self.viterbi_insync_frames = viterbi_insync_frames
self.viterbi_outsync_frames = viterbi_outsync_frames
self.satellite = satellite
self.decim = decim
self.freq = freq
self.frames_file = frames_file
self.baseband_file = baseband_file
self.symb_rate = symb_rate
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6/decim_tb
self.viterbi_sync_threshold_text = viterbi_sync_threshold_text = viterbi_sync_threshold
self.viterbi_sync_after_text = viterbi_sync_after_text = viterbi_insync_frames
self.viterbi_outofsync_after_text = viterbi_outofsync_after_text = viterbi_outsync_frames
self.viterbi_node_sync_text = viterbi_node_sync_text = viterbi_sync_check
self.sps = sps = samp_rate/symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Viterbi decoder")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._viterbi_sync_threshold_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_threshold_text,
callback=self.set_viterbi_sync_threshold_text,
label="Viterbi node sync threshold [BER]",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_threshold_text_static_text, 3, 0, 1, 1)
self._viterbi_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_after_text,
callback=self.set_viterbi_sync_after_text,
label="Valid frames for Viterbi decoder sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_after_text_static_text, 4, 0, 1, 1)
self._viterbi_outofsync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_outofsync_after_text,
callback=self.set_viterbi_outofsync_after_text,
label="Invalid frames for Viterbi decoder out of sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_outofsync_after_text_static_text, 5, 0, 1, 1)
self._viterbi_node_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_node_sync_text,
callback=self.set_viterbi_node_sync_text,
label="Viterbi node sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_node_sync_text_static_text, 2, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).Add(self._baseband_file_text_inf_static_text)
##################################################
# Blocks
##################################################
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(sps, clock_alpha_sl*clock_alpha_sl/4.0, 0.5, clock_alpha_sl, 0.05)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(pll_alpha_sl, pll_alpha_sl*pll_alpha_sl/4.0, 0.07, -0.07, 4)
self.gr_file_sink_0_1 = gr.file_sink(gr.sizeof_short*2, baseband_file)
self.gr_float_to_complex_0 = gr.float_to_complex(1)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vcc((1, ))
self.gr_null_sink_0 = gr.null_sink(gr.sizeof_gr_complex*1)
self.gr_short_to_float_0 = gr.short_to_float()
self.gr_short_to_float_0_0 = gr.short_to_float()
self.gr_vector_to_streams_0 = gr.vector_to_streams(gr.sizeof_short*1, 2)
self.root_raised_cosine_filter_0 = gr.fir_filter_ccf(1, firdes.root_raised_cosine(
1, samp_rate, symb_rate, 0.25, int(11*samp_rate/symb_rate)))
self.usrp2_source_xxxx2_0 = usrp2.source_16sc()
self.usrp2_source_xxxx2_0.set_decim(decim_tb)
self.usrp2_source_xxxx2_0.set_center_freq(freq_tb)
self.usrp2_source_xxxx2_0.set_gain(gain_tb)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=10,
ref_level=15,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_fftsink2 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=15,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="RRC filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink2.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="QPSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_float_to_complex_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.gr_null_sink_0, 0))
self.connect((self.root_raised_cosine_filter_0, 0), (self.wxgui_fftsink2, 0))
self.connect((self.gr_short_to_float_0, 0), (self.gr_float_to_complex_0, 0))
self.connect((self.gr_short_to_float_0_0, 0), (self.gr_float_to_complex_0, 1))
self.connect((self.usrp2_source_xxxx2_0, 0), (self.gr_file_sink_0_1, 0))
self.connect((self.usrp2_source_xxxx2_0, 0), (self.gr_vector_to_streams_0, 0))
self.connect((self.gr_vector_to_streams_0, 1), (self.gr_short_to_float_0_0, 0))
self.connect((self.gr_vector_to_streams_0, 0), (self.gr_short_to_float_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.root_raised_cosine_filter_0, 0))
self.connect((self.gr_float_to_complex_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_multiply_const_vxx_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.root_raised_cosine_filter_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.wxgui_scopesink2_1, 0))
def __init__(
self,
deframer_insync_frames=2,
viterbi_insync_frames=5,
deframer_outsync_frames=5,
viterbi_outsync_frames=20,
viterbi_sync_check=True,
viterbi_sync_threshold=0.1,
deframer_sync_check=True,
pll_alpha=0.005,
freq=1691.02e6,
gain=23,
side="A",
decim=25,
symb_rate=(3500e3 / 3 + 3500e3) / 2,
frames_file=os.environ['HOME'] + '/MetOp-AHRPT_cadu_frames.cadu',
clock_alpha=0.05,
baseband_file='/home/martin/GNURadioData/USRPSamples/AHRPT_MetOp-A_20100306_0758UTC_U2_d25.sam',
satellite='MetOp'):
grc_wxgui.top_block_gui.__init__(
self, title="MetOp AHRPT Receiver from baseband file")
##################################################
# Parameters
##################################################
self.deframer_insync_frames = deframer_insync_frames
self.viterbi_insync_frames = viterbi_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.viterbi_outsync_frames = viterbi_outsync_frames
self.viterbi_sync_check = viterbi_sync_check
self.viterbi_sync_threshold = viterbi_sync_threshold
self.deframer_sync_check = deframer_sync_check
self.pll_alpha = pll_alpha
self.freq = freq
self.gain = gain
self.side = side
self.decim = decim
self.symb_rate = symb_rate
self.frames_file = frames_file
self.clock_alpha = clock_alpha
self.baseband_file = baseband_file
self.satellite = satellite
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6 / decim_tb
self.viterbi_sync_threshold_text = viterbi_sync_threshold_text = viterbi_sync_threshold
self.viterbi_sync_after_text = viterbi_sync_after_text = viterbi_insync_frames
self.viterbi_outofsync_after_text = viterbi_outofsync_after_text = viterbi_outsync_frames
self.viterbi_node_sync_text = viterbi_node_sync_text = viterbi_sync_check
self.sps = sps = samp_rate / symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S",
localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = 'no output file'
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb),
"PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Viterbi decoder")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._viterbi_sync_threshold_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_threshold_text,
callback=self.set_viterbi_sync_threshold_text,
label="Viterbi node sync threshold [BER]",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_sync_threshold_text_static_text, 3, 0, 1, 1)
self._viterbi_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_after_text,
callback=self.set_viterbi_sync_after_text,
label="Valid frames for Viterbi decoder sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_sync_after_text_static_text, 4, 0, 1, 1)
self._viterbi_outofsync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_outofsync_after_text,
callback=self.set_viterbi_outofsync_after_text,
label="Invalid frames for Viterbi decoder out of sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_outofsync_after_text_static_text, 5, 0, 1, 1)
self._viterbi_node_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_node_sync_text,
callback=self.set_viterbi_node_sync_text,
label="Viterbi node sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_node_sync_text_static_text, 2, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0,
1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1,
1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._frames_file_text_inf_static_text,
3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._datetime_text_static_text, 1, 0,
1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(
self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.cs2cf = gr.interleaved_short_to_complex()
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0 / 32767.0, 1.0)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(
sps, clock_alpha_sl * clock_alpha_sl / 4.0, 0.5, clock_alpha_sl,
0.05)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(
pll_alpha_sl, pll_alpha_sl * pll_alpha_sl / 4.0, 0.07, -0.07, 4)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short * 1,
baseband_file, True)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vcc((1, ))
self.gr_null_sink_0 = gr.null_sink(gr.sizeof_gr_complex * 1)
self.gr_throttle_0 = gr.throttle(gr.sizeof_short * 1, samp_rate * 2)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="QPSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1 / samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_multiply_const_vxx_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_throttle_0, 0), (self.cs2cf, 0))
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
self.connect((self.cs2cf, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0),
(self.wxgui_scopesink2_1, 0))
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_multiply_const_vxx_0, 0),
(self.gr_null_sink_0, 0))
def __init__(self,frame,panel,vbox,argv):
stdgui2.std_top_block.__init__ (self,frame,panel,vbox,argv)
usage="%prog: [options] [input_filename]. \n If you don't specify an input filename the usrp will be used as source\n " \
"Make sure your input capture file containes interleaved shorts not complex floats"
parser=OptionParser(option_class=eng_option, usage=usage)
parser.add_option("-a", "--args", type="string", default="",
help="UHD device address args [default=%default]")
parser.add_option("", "--spec", type="string", default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A", "--antenna", type="string", default=None,
help="select Rx Antenna where appropriate")
parser.add_option("-s", "--samp-rate", type="eng_float", default=1e6,
help="set sample rate")
parser.add_option("-f", "--freq", type="eng_float", default=519.25e6,
help="set frequency to FREQ", metavar="FREQ")
parser.add_option("-g", "--gain", type="eng_float", default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-c", "--contrast", type="eng_float", default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b", "--brightness", type="eng_float", default=0.0,
help="set brightness (default is 0)")
parser.add_option("-p", "--pal", action="store_true", default=False,
help="PAL video format (this is the default)")
parser.add_option("-n", "--ntsc", action="store_true", default=False,
help="NTSC video format")
parser.add_option("-o", "--out-filename", type="string", default="sdl",
help="For example out_raw_uchar.gray. If you don't specify an output filename you will get a video_sink_sdl realtime output window. You then need to have gr-video-sdl installed)")
parser.add_option("-r", "--repeat", action="store_false", default=True,
help="repeat file in a loop")
parser.add_option("", "--freq-min", type="eng_float", default=50.25e6,
help="Set a minimum frequency [default=%default]")
parser.add_option("", "--freq-max", type="eng_float", default=900.25e6,
help="Set a maximum frequency [default=%default]")
(options, args) = parser.parse_args()
if not ((len(args) == 1) or (len(args) == 0)):
parser.print_help()
sys.exit(1)
if len(args) == 1:
filename = args[0]
else:
filename = None
self.frame = frame
self.panel = panel
self.contrast = options.contrast
self.brightness = options.brightness
self.state = "FREQ"
self.freq = 0
self.tv_freq_min = options.freq_min
self.tv_freq_max = options.freq_max
# build graph
self.u=None
if not (options.out_filename=="sdl"):
options.repeat=False
usrp_rate = options.samp_rate
if not ((filename is None) or (filename=="usrp")):
# file is data source
self.filesource = gr.file_source(gr.sizeof_short,filename,options.repeat)
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource,self.istoc)
self.src=self.istoc
options.gain=0.0
self.gain=0.0
else: # use a UHD device
self.u = uhd.usrp_source(device_addr=options.args, stream_args=uhd.stream_args('fc32'))
# Set the subdevice spec
if(options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if(options.antenna):
self.u.set_antenna(options.antenna, 0)
self.u.set_samp_rate(usrp_rate)
dev_rate = self.u.get_samp_rate()
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.u.get_gain_range()
options.gain = float(g.start()+g.stop())/2.0
self.src=self.u
self.gain = options.gain
f2uc=gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal=True #set default to PAL
if options.pal:
lines_per_frame=625.0
frames_per_sec=25.0
show_width=768
elif options.ntsc:
lines_per_frame=525.0
frames_per_sec=29.97002997
show_width=640
width=int(usrp_rate/(lines_per_frame*frames_per_sec))
height=int(lines_per_frame)
if (options.out_filename=="sdl"):
#Here comes the tv screen, you have to build and install
#gr-video-sdl for this (subproject of gnuradio, only in cvs
#for now)
try:
video_sink = video_sdl.sink_uc ( frames_per_sec, width, height, 0,
show_width, height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst=video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " +str(width)+ "x" + str(height) \
+ " gray:" + options.out_filename
print "(Use the spacebar to advance to next frames)"
options.repeat=False
file_sink=gr.file_sink(gr.sizeof_char, options.out_filename)
self.dst =file_sink
self.agc=gr.agc_cc(1e-7,1.0,1.0) #1e-7
self.am_demod = gr.complex_to_mag ()
self.set_blacklevel=gr.add_const_ff(0.0)
self.invert_and_scale = gr.multiply_const_ff (0.0) #-self.contrast *128.0*255.0/(200.0)
# now wire it all together
#sample_rate=options.width*options.height*options.framerate
process_type='do_no_sync'
if process_type=='do_no_sync':
self.connect (self.src, self.agc,self.am_demod,
self.invert_and_scale, self.set_blacklevel,
f2uc,self.dst)
elif process_type=='do_tv_sync_adv':
#defaults: gr.tv_sync_adv (double sampling_freq, unsigned
#int tv_format,bool output_active_video_only=false, bool
#do_invert=false, double wanted_black_level=0.0, double
#wanted_white_level=255.0, double avg_alpha=0.1, double
#initial_gain=1.0, double initial_offset=0.0,bool
#debug=false)
#note, this block is not yet in cvs
self.tv_sync_adv=gr.tv_sync_adv(usrp_rate, 0, False, False,
0.0, 255.0, 0.01, 1.0, 0.0, False)
self.connect (self.src, self.am_demod, self.invert_and_scale,
self.tv_sync_adv, s2f, f2uc, self.dst)
elif process_type=='do_nullsink':
#self.connect (self.src, self.am_demod,self.invert_and_scale,f2uc,video_sink)
c2r=gr.complex_to_real()
nullsink=gr.null_sink(gr.sizeof_float)
self.connect (self.src, c2r,nullsink) #video_sink)
elif process_type=='do_tv_sync_corr':
frame_size=width*height #int(usrp_rate/25.0)
nframes=10# 32
search_window=20*nframes
debug=False
video_alpha=0.3 #0.1
corr_alpha=0.3
#Note: this block is not yet in cvs
tv_corr=gr.tv_correlator_ff(frame_size,nframes, search_window,
video_alpha, corr_alpha,debug)
shift=gr.add_const_ff(-0.7)
self.connect (self.src, self.agc, self.am_demod, tv_corr,
self.invert_and_scale, self.set_blacklevel,
f2uc, self.dst)
else: # process_type=='do_test_image':
src_vertical_bars = gr.sig_source_f (usrp_rate, gr.GR_SIN_WAVE,
10.0 *usrp_rate/320, 255,128)
self.connect(src_vertical_bars, f2uc, self.dst)
self._build_gui(vbox, usrp_rate, usrp_rate, usrp_rate)
frange = self.u.get_freq_range()
if(frange.start() > self.tv_freq_max or frange.stop() < self.tv_freq_min):
sys.stderr.write("Radio does not support required frequency range.\n")
sys.exit(1)
if(options.freq < self.tv_freq_min or options.freq > self.tv_freq_max):
sys.stderr.write("Requested frequency is outside of required frequency range.\n")
sys.exit(1)
# set initial values
self.set_gain(options.gain)
self.set_contrast(self.contrast)
self.set_brightness(options.brightness)
if not(self.set_freq(options.freq)):
self._set_status_msg("Failed to set initial frequency")
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.config_filename = config_filename = "usrp_rx_hrpt.cfg"
self._decim_config = ConfigParser.ConfigParser()
self._decim_config.read(config_filename)
try:
decim = self._decim_config.getfloat("usrp", "decim")
except:
decim = 16
self.decim = decim
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 64e6 / decim
self.sps = sps = sample_rate / sym_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try:
side = self._side_config.get("usrp", "side")
except:
side = "A"
self.side = side
self._saved_sync_alpha_config = ConfigParser.ConfigParser()
self._saved_sync_alpha_config.read(config_filename)
try:
saved_sync_alpha = self._saved_sync_alpha_config.getfloat("demod", "sync_alpha")
except:
saved_sync_alpha = 0.05
self.saved_sync_alpha = saved_sync_alpha
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat("demod", "pll_alpha")
except:
saved_pll_alpha = 0.05
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try:
saved_gain = self._saved_gain_config.getfloat("usrp", "gain")
except:
saved_gain = 35
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try:
saved_freq = self._saved_freq_config.getfloat("usrp", "freq")
except:
saved_freq = 1698e6
self.saved_freq = saved_freq
self.hs = hs = int(sps / 2.0)
self.sync_alpha = sync_alpha = saved_sync_alpha
self.side_text = side_text = side
self.pll_alpha = pll_alpha = saved_pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try:
output_filename = self._output_filename_config.get("output", "filename")
except:
output_filename = "frames.dat"
self.output_filename = output_filename
self.mf_taps = mf_taps = [-0.5 / hs] * hs + [0.5 / hs] * hs
self.max_sync_offset = max_sync_offset = 0.01
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.decim_text = decim_text = decim
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "RX")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Demod")
self.GridAdd(self.displays, 2, 0, 1, 4)
##################################################
# Controls
##################################################
_sync_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._sync_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_sync_alpha_sizer,
value=self.sync_alpha,
callback=self.set_sync_alpha,
label="SYNC Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._sync_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_sync_alpha_sizer,
value=self.sync_alpha,
callback=self.set_sync_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_sync_alpha_sizer, 0, 3, 1, 1)
self._side_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.side_text,
callback=self.set_side_text,
label="USRP Side",
converter=forms.str_converter(),
)
self.GridAdd(self._side_text_static_text, 1, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 0, 2, 1, 1)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="RX Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 0, 1, 1, 1)
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_text_box, 0, 0, 1, 1)
self._decim_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.decim_text,
callback=self.set_decim_text,
label="Decimation",
converter=forms.float_converter(),
)
self.GridAdd(self._decim_text_static_text, 1, 1, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder()
self.deframer = noaa.hrpt_deframer()
self.frame_sink = gr.file_sink(gr.sizeof_short * 1, output_filename)
self.gr_fir_filter_xxx_0 = gr.fir_filter_ccc(1, (mf_taps))
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha ** 2 / 4.0, max_carrier_offset)
self.pll_scope = scopesink2.scope_sink_f(
self.displays.GetPage(1).GetWin(),
title="Demod Waveform",
sample_rate=sample_rate,
v_scale=0.5,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.pll_scope.win, 0, 0, 1, 1)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=8,
ref_level=-5,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=True,
avg_alpha=0.1,
title="RX Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).GridAdd(self.rx_fft.win, 0, 0, 1, 1)
self.rx_scope = scopesink2.scope_sink_c(
self.displays.GetPage(0).GetWin(),
title="RX Waveform",
sample_rate=sample_rate,
v_scale=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(0).GridAdd(self.rx_scope.win, 1, 0, 1, 1)
self.sync = noaa.hrpt_sync_fb(sync_alpha, sync_alpha ** 2 / 4.0, sps, max_sync_offset)
self.usrp_source = grc_usrp.simple_source_c(which=0, side=side, rx_ant="RXA")
self.usrp_source.set_decim_rate(decim)
self.usrp_source.set_frequency(freq, verbose=True)
self.usrp_source.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.sync, 0), (self.deframer, 0))
self.connect((self.pll, 0), (self.sync, 0))
self.connect((self.pll, 0), (self.pll_scope, 0))
self.connect((self.agc, 0), (self.rx_scope, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.agc, 0), (self.gr_fir_filter_xxx_0, 0))
self.connect((self.gr_fir_filter_xxx_0, 0), (self.pll, 0))
self.connect((self.usrp_source, 0), (self.agc, 0))
def __init__(self):
gr.top_block.__init__(self, "USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 4e6
self.sps = sps = sample_rate/sym_rate
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/config.conf'
self._pll_alpha_config = ConfigParser.ConfigParser()
self._pll_alpha_config.read(config_filename)
try: pll_alpha = self._pll_alpha_config.getfloat('usrp_rx_hrpt', 'pll_alpha')
except: pll_alpha = 0.01
self.pll_alpha = pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try: output_filename = self._output_filename_config.get('usrp_rx_hrpt', 'filename')
except: output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
self._gain_config = ConfigParser.ConfigParser()
self._gain_config.read(config_filename)
try: gain = self._gain_config.getfloat('usrp_rx_hrpt', 'gain')
except: gain = 35
self.gain = gain
self._freq_config = ConfigParser.ConfigParser()
self._freq_config.read(config_filename)
try: freq = self._freq_config.getfloat('usrp_rx_hrpt', 'freq')
except: freq = 1698e6
self.freq = freq
self._clock_alpha_config = ConfigParser.ConfigParser()
self._clock_alpha_config.read(config_filename)
try: clock_alpha = self._clock_alpha_config.getfloat('usrp_rx_hrpt', 'clock_alpha')
except: clock_alpha = 0.01
self.clock_alpha = clock_alpha
##################################################
# Blocks
##################################################
self.throttle = gr.throttle(gr.sizeof_short*1, 2*sample_rate)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_file_source_0 = gr.file_source(gr.sizeof_short*1, "input_filename", False)
self.frame_sink = gr.file_sink(gr.sizeof_short*1, output_filename)
self.frame_sink.set_unbuffered(False)
self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
self.deframer = noaa.hrpt_deframer()
self.decoder = noaa.hrpt_decoder(True,True)
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
##################################################
# Connections
##################################################
self.connect((self.gr_moving_average_xx_0, 0), (self.digital_clock_recovery_mm_xx_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.throttle, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.digital_clock_recovery_mm_xx_0, 0), (self.digital_binary_slicer_fb_0, 0))
self.connect((self.digital_binary_slicer_fb_0, 0), (self.deframer, 0))
def __init__(self,
frames_file=os.environ['HOME'] + '/NOAA-XX.hrpt',
decim=32,
satellite='NOAA-XX',
baseband_file=os.environ['HOME'] + '/NOAA-XX.dat',
sync_check=False):
grc_wxgui.top_block_gui.__init__(self,
title="NOAA HRPT Baseband To Frames")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.frames_file = frames_file
self.decim = decim
self.satellite = satellite
self.baseband_file = baseband_file
self.sync_check = sync_check
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 64e6 / decim
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/noaa_hrpt.conf'
self.sps = sps = sample_rate / sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat(
"satname", 'pll_alpha')
except:
saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try:
saved_clock_alpha = self._saved_clock_alpha_config.getfloat(
"satname", 'clock_alpha')
except:
saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.sync_check_txt = sync_check_txt = sync_check
self.satname_txt = satname_txt = satellite
self.pll_alpha = pll_alpha = saved_pll_alpha
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.hs = hs = int(sps / 2.0)
self.frames_file_txt = frames_file_txt = frames_file
self.decim_txt = decim_txt = decim
self.clock_alpha = clock_alpha = saved_clock_alpha
self.baseband_file_txt = baseband_file_txt = baseband_file
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays),
"NOAA HRPT Spectrum")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Information")
self.Add(self.displays)
##################################################
# Controls
##################################################
self._sync_check_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.sync_check_txt,
callback=self.set_sync_check_txt,
label="Sync check",
converter=forms.int_converter(),
)
self.GridAdd(self._sync_check_txt_static_text, 0, 3, 1, 1)
self._satname_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.satname_txt,
callback=self.set_satname_txt,
label="Satellite",
converter=forms.str_converter(),
)
self.GridAdd(self._satname_txt_static_text, 0, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 1, 0, 1, 1)
self._frames_file_txt_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.frames_file_txt,
callback=self.set_frames_file_txt,
label="Frames output filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._frames_file_txt_static_text, 2,
0, 1, 1)
self._decim_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.decim_txt,
callback=self.set_decim_txt,
label="Decimation",
converter=forms.str_converter(),
)
self.GridAdd(self._decim_txt_static_text, 0, 1, 1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 1, 1, 1, 1)
self._baseband_file_txt_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.baseband_file_txt,
callback=self.set_baseband_file_txt,
label="Baseband filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._baseband_file_txt_static_text,
1, 0, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True, False)
self.frame_sink = gr.file_sink(gr.sizeof_short * 1,
"/home/jerry/NOAA-XX.hrpt")
self.frame_sink.set_unbuffered(False)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.gr_file_source_0 = gr.file_source(
gr.sizeof_short * 1,
"/home/jerry/hrpt/baseband/NOAA-18/2011-01-07T132821-NOAA-18.dat",
False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex(
)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.poesweather_noaa_hrpt_deframer_0 = poesweather.noaa_hrpt_deframer(
sync_check)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=45,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="NOAA HRPT Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).Add(self.rx_fft.win)
self.throttle = gr.throttle(gr.sizeof_short * 1, sample_rate * 10)
##################################################
# Connections
##################################################
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.agc, 0))
self.connect((self.throttle, 0),
(self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0),
(self.frame_sink, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0),
(self.decoder, 0))
self.connect((self.gr_binary_slicer_fb_0, 0),
(self.poesweather_noaa_hrpt_deframer_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP LRIT Receiver")
##################################################
# Variables
##################################################
self.config_filename = config_filename = "usrp_rx_lrit.cfg"
self._saved_decim_config = ConfigParser.ConfigParser()
self._saved_decim_config.read(config_filename)
try: saved_decim = self._saved_decim_config.getint("main", "decim")
except: saved_decim = 160
self.saved_decim = saved_decim
self.decim = decim = saved_decim
self.symbol_rate = symbol_rate = 293e3
self._saved_gain_mu_config = ConfigParser.ConfigParser()
self._saved_gain_mu_config.read(config_filename)
try: saved_gain_mu = self._saved_gain_mu_config.getfloat("main", "gain_mu")
except: saved_gain_mu = 0.005
self.saved_gain_mu = saved_gain_mu
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try: saved_gain = self._saved_gain_config.getfloat("main", "gain")
except: saved_gain = 33
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try: saved_freq = self._saved_freq_config.getfloat("main", "freq")
except: saved_freq = 137e6
self.saved_freq = saved_freq
self._saved_costas_alpha_config = ConfigParser.ConfigParser()
self._saved_costas_alpha_config.read(config_filename)
try: saved_costas_alpha = self._saved_costas_alpha_config.getfloat("main", "costas_alpha")
except: saved_costas_alpha = 0.005
self.saved_costas_alpha = saved_costas_alpha
self.samp_rate = samp_rate = 64e6/decim
self.sps = sps = samp_rate/symbol_rate
self.gain_mu = gain_mu = saved_gain_mu
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.costas_alpha = costas_alpha = saved_costas_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "USRP RX")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Costas Output")
self.GridAdd(self.displays, 2, 0, 1, 3)
##################################################
# Controls
##################################################
self._decim_text_box = forms.text_box(
parent=self.GetWin(),
value=self.decim,
callback=self.set_decim,
label="Decim",
converter=forms.int_converter(),
)
self.GridAdd(self._decim_text_box, 0, 0, 1, 1)
_gain_mu_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_mu_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
label="Gain Mu",
converter=forms.float_converter(),
proportion=0,
)
self._gain_mu_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_mu_sizer, 1, 1, 1, 1)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=115,
num_steps=115,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 0, 1, 1, 1)
_freq_sizer = wx.BoxSizer(wx.VERTICAL)
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_freq_sizer,
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
proportion=0,
)
self._freq_slider = forms.slider(
parent=self.GetWin(),
sizer=_freq_sizer,
value=self.freq,
callback=self.set_freq,
minimum=135e6,
maximum=139e6,
num_steps=400,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_freq_sizer, 0, 2, 1, 1)
_costas_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._costas_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
label="Costas Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._costas_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_costas_alpha_sizer, 1, 0, 1, 1)
##################################################
# Blocks
##################################################
self.gr_add_const_vxx_0 = gr.add_const_vff((48.0, ))
self.gr_agc_xx_0 = gr.agc_cc(1e-6, 1.0, 1.0/32767.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_char_to_float_0 = gr.char_to_float()
self.gr_complex_to_real_0 = gr.complex_to_real(1)
self.gr_file_sink_0 = gr.file_sink(gr.sizeof_char*1, "bits.dat")
self.gr_file_source_0 = gr.file_source(gr.sizeof_gr_complex*1, "lrit.dat", False)
self.gr_float_to_char_0 = gr.float_to_char()
self.gr_mpsk_receiver_cc_0 = gr.mpsk_receiver_cc(2, 0, costas_alpha, costas_alpha*costas_alpha/4.0, -0.05, 0.05, 0.5, gain_mu, sps, gain_mu*gain_mu/4.0, 0.05)
self.gr_probe_mpsk_snr_c_0 = grc_blks2.probe_mpsk_snr_c(
type='snr',
alpha=0.0001,
probe_rate=10,
)
self.gr_throttle_0 = gr.throttle(gr.sizeof_gr_complex*1, samp_rate)
self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=10,
y_divs=10,
ref_level=50,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=False,
avg_alpha=None,
title="Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).GridAdd(self.wxgui_fftsink2_0.win, 0, 0, 1, 1)
self.wxgui_numbersink2_0 = numbersink2.number_sink_f(
self.displays.GetPage(1).GetWin(),
unit="dB",
minval=0,
maxval=30,
factor=1.0,
decimal_places=1,
ref_level=0,
sample_rate=10,
number_rate=10,
average=False,
avg_alpha=None,
label="SNR",
peak_hold=False,
show_gauge=True,
)
self.displays.GetPage(1).GridAdd(self.wxgui_numbersink2_0.win, 2, 0, 1, 1)
self.wxgui_scopesink2_0 = scopesink2.scope_sink_c(
self.displays.GetPage(0).GetWin(),
title="Waveform",
sample_rate=samp_rate,
v_scale=0.5,
t_scale=20.0/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.displays.GetPage(0).GridAdd(self.wxgui_scopesink2_0.win, 1, 0, 1, 1)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.displays.GetPage(1).GetWin(),
title="Scope Plot",
sample_rate=samp_rate,
v_scale=0.4,
t_scale=20.0/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.wxgui_scopesink2_1.win, 0, 0, 1, 1)
##################################################
# Connections
##################################################
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_scopesink2_0, 0))
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
self.connect((self.gr_throttle_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_probe_mpsk_snr_c_0, 0), (self.wxgui_numbersink2_0, 0))
self.connect((self.gr_mpsk_receiver_cc_0, 0), (self.gr_probe_mpsk_snr_c_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.gr_mpsk_receiver_cc_0, 0))
self.connect((self.gr_mpsk_receiver_cc_0, 0), (self.wxgui_scopesink2_1, 0))
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_fftsink2_0, 0))
self.connect((self.gr_mpsk_receiver_cc_0, 0), (self.gr_complex_to_real_0, 0))
self.connect((self.gr_complex_to_real_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.gr_char_to_float_0, 0))
self.connect((self.gr_char_to_float_0, 0), (self.gr_add_const_vxx_0, 0))
self.connect((self.gr_add_const_vxx_0, 0), (self.gr_float_to_char_0, 0))
self.connect((self.gr_float_to_char_0, 0), (self.gr_file_sink_0, 0))
def __init__(self, satellite='NOAAxx', decim=50, baseband_file="/home/martin/GNURadioData/hrpt/baseband/HRPT_NOAA19_2010-09-10_12-35-34_UTC_U2_d50.sam", frames_file=os.environ['HOME'] + '/noaa_hrpt_frames.hmf', deframer_outsync_frames=5, deframer_insync_frames=2, clock_alpha=0.005, gain_mu=0.005, pll_alpha=0.005, pll_beta=0.00001, deframer_sync_check=True, symb_rate=600*1109):
grc_wxgui.top_block_gui.__init__(self, title="NOAA HRPT Receiver from baseband file")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.satellite = satellite
self.decim = decim
self.baseband_file = baseband_file
self.frames_file = frames_file
self.deframer_outsync_frames = deframer_outsync_frames
self.deframer_insync_frames = deframer_insync_frames
self.clock_alpha = clock_alpha
self.gain_mu = gain_mu
self.pll_alpha = pll_alpha
self.pll_beta = pll_beta
self.deframer_sync_check = deframer_sync_check
self.symb_rate = symb_rate
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6/decim_tb
self.sps = sps = samp_rate/symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_beta_sl = pll_beta_sl = pll_beta
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.hs = hs = int(sps/2.0)
self.gain_mu_sl = gain_mu_sl = gain_mu
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Input baseband")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
_pll_beta_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_beta_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_beta_sl_sizer,
value=self.pll_beta_sl,
callback=self.set_pll_beta_sl,
label="PLL Beta",
converter=forms.float_converter(),
proportion=0,
)
self._pll_beta_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_beta_sl_sizer,
value=self.pll_beta_sl,
callback=self.set_pll_beta_sl,
minimum=0.000001,
maximum=0.001,
num_steps=1000,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_beta_sl_sizer, 2, 0, 1, 1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
_gain_mu_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_mu_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_gain_mu_sl_sizer,
value=self.gain_mu_sl,
callback=self.set_gain_mu_sl,
label="Gain MU",
converter=forms.float_converter(),
proportion=0,
)
self._gain_mu_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_gain_mu_sl_sizer,
value=self.gain_mu_sl,
callback=self.set_gain_mu_sl,
minimum=0.0001,
maximum=0.01,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_gain_mu_sl_sizer, 1, 2, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.cs2cf = gr.interleaved_short_to_complex()
self.gr_agc_xx_0_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(sps/2.0, clock_alpha**2/4.0, 0.5, gain_mu_sl, max_clock_offset)
self.gr_complex_to_real_0 = gr.complex_to_real(1)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(pll_alpha_sl, pll_beta_sl, 0.07, -0.07, 2)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short*1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short*1, baseband_file, False)
self.gr_moving_average_xx_0 = gr.moving_average_cc(hs, 1.0/hs, 4000)
self.gr_throttle_0 = gr.throttle(gr.sizeof_short*1, samp_rate*2)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True,False)
self.poesweather_univ_hrpt_deframer_0 = poesweather.univ_hrpt_deframer(deframer_sync_check, 11090, deframer_insync_frames, deframer_outsync_frames)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=50,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="PSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
trig_mode=gr.gr_TRIG_MODE_AUTO,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
self.connect((self.gr_throttle_0, 0), (self.cs2cf, 0))
self.connect((self.cs2cf, 0), (self.gr_agc_xx_0_0, 0))
self.connect((self.cs2cf, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_complex_to_real_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0), (self.gr_file_sink_0_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_univ_hrpt_deframer_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0), (self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_agc_xx_0_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_complex_to_real_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.wxgui_scopesink2_1, 0))
def __init__(self):
gr.top_block.__init__(self, "Usrp Rx Hrpt Nogui")
##################################################
# Variables
##################################################
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self._decim_config = ConfigParser.ConfigParser()
self._decim_config.read(config_filename)
try:
decim = self._decim_config.getfloat('usrp_rx_hrpt', 'decim')
except:
decim = 32
self.decim = decim
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 64e6 / decim
self.sps = sps = sample_rate / sym_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try:
side = self._side_config.get('usrp_rx_hrpt', 'side')
except:
side = 'A'
self.side = side
self._pll_alpha_config = ConfigParser.ConfigParser()
self._pll_alpha_config.read(config_filename)
try:
pll_alpha = self._pll_alpha_config.getfloat(
'usrp_rx_hrpt', 'pll_alpha')
except:
pll_alpha = 0.01
self.pll_alpha = pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try:
output_filename = self._output_filename_config.get(
'usrp_rx_hrpt', 'filename')
except:
output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.hs = hs = int(sps / 2.0)
self._gain_config = ConfigParser.ConfigParser()
self._gain_config.read(config_filename)
try:
gain = self._gain_config.getfloat('usrp_rx_hrpt', 'gain')
except:
gain = 35
self.gain = gain
self._freq_config = ConfigParser.ConfigParser()
self._freq_config.read(config_filename)
try:
freq = self._freq_config.getfloat('usrp_rx_hrpt', 'freq')
except:
freq = 1698e6
self.freq = freq
self._clock_alpha_config = ConfigParser.ConfigParser()
self._clock_alpha_config.read(config_filename)
try:
clock_alpha = self._clock_alpha_config.getfloat(
'usrp_rx_hrpt', 'clock_alpha')
except:
clock_alpha = 0.01
self.clock_alpha = clock_alpha
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True, True)
self.deframer = noaa.hrpt_deframer()
self.frame_sink = gr.file_sink(gr.sizeof_short * 1, output_filename)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.usrp_source = grc_usrp.simple_source_c(which=0,
side=side,
rx_ant="RXA")
self.usrp_source.set_decim_rate(decim)
self.usrp_source.set_frequency(freq, verbose=True)
self.usrp_source.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.usrp_source, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.deframer, 0))
def __init__(self):
gr.top_block.__init__(self, "Usrp Rx Hrpt Nogui")
##################################################
# Variables
##################################################
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/config.conf'
self._decim_config = ConfigParser.ConfigParser()
self._decim_config.read(config_filename)
try: decim = self._decim_config.getfloat('usrp_rx_hrpt', 'decim')
except: decim = 32
self.decim = decim
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.sps = sps = sample_rate/sym_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try: side = self._side_config.get('usrp_rx_hrpt', 'side')
except: side = 'A'
self.side = side
self._pll_alpha_config = ConfigParser.ConfigParser()
self._pll_alpha_config.read(config_filename)
try: pll_alpha = self._pll_alpha_config.getfloat('usrp_rx_hrpt', 'pll_alpha')
except: pll_alpha = 0.01
self.pll_alpha = pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try: output_filename = self._output_filename_config.get('usrp_rx_hrpt', 'filename')
except: output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
self._gain_config = ConfigParser.ConfigParser()
self._gain_config.read(config_filename)
try: gain = self._gain_config.getfloat('usrp_rx_hrpt', 'gain')
except: gain = 35
self.gain = gain
self._freq_config = ConfigParser.ConfigParser()
self._freq_config.read(config_filename)
try: freq = self._freq_config.getfloat('usrp_rx_hrpt', 'freq')
except: freq = 1698e6
self.freq = freq
self._clock_alpha_config = ConfigParser.ConfigParser()
self._clock_alpha_config.read(config_filename)
try: clock_alpha = self._clock_alpha_config.getfloat('usrp_rx_hrpt', 'clock_alpha')
except: clock_alpha = 0.01
self.clock_alpha = clock_alpha
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True,True)
self.deframer = noaa.hrpt_deframer()
self.frame_sink = gr.file_sink(gr.sizeof_short*1, output_filename)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.usrp_source = grc_usrp.simple_source_c(which=0, side=side, rx_ant="RXA")
self.usrp_source.set_decim_rate(decim)
self.usrp_source.set_frequency(freq, verbose=True)
self.usrp_source.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.usrp_source, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.deframer, 0))
def __init__(self, deframer_insync_frames=2, deframer_sync_check=True, viterbi_insync_frames=5, deframer_outsync_frames=5, viterbi_outsync_frames=20, viterbi_sync_check=True, viterbi_sync_threshold=0.1, satellite='GOES-LRIT', freq=1691.02e6, gain=23, decim=108, side="A", pll_alpha=0.005, symb_rate=293883, clock_alpha=0.005):
grc_wxgui.top_block_gui.__init__(self, title="USRP LRIT Receiver - check signal quality")
##################################################
# Parameters
##################################################
self.deframer_insync_frames = deframer_insync_frames
self.deframer_sync_check = deframer_sync_check
self.viterbi_insync_frames = viterbi_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.viterbi_outsync_frames = viterbi_outsync_frames
self.viterbi_sync_check = viterbi_sync_check
self.viterbi_sync_threshold = viterbi_sync_threshold
self.satellite = satellite
self.freq = freq
self.gain = gain
self.decim = decim
self.side = side
self.pll_alpha = pll_alpha
self.symb_rate = symb_rate
self.clock_alpha = clock_alpha
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 64e6/decim_tb
self.viterbi_sync_threshold_text = viterbi_sync_threshold_text = viterbi_sync_threshold
self.viterbi_sync_after_text = viterbi_sync_after_text = viterbi_insync_frames
self.viterbi_outofsync_after_text = viterbi_outofsync_after_text = viterbi_outsync_frames
self.viterbi_node_sync_text = viterbi_node_sync_text = viterbi_sync_check
self.sps = sps = samp_rate/symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = 'no output file'
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = 'no output file'
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Viterbi decoder")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._viterbi_sync_threshold_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_threshold_text,
callback=self.set_viterbi_sync_threshold_text,
label="Viterbi node sync threshold [BER]",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_threshold_text_static_text, 3, 0, 1, 1)
self._viterbi_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_after_text,
callback=self.set_viterbi_sync_after_text,
label="Valid frames for Viterbi decoder sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_after_text_static_text, 4, 0, 1, 1)
self._viterbi_outofsync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_outofsync_after_text,
callback=self.set_viterbi_outofsync_after_text,
label="Invalid frames for Viterbi decoder out of sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_outofsync_after_text_static_text, 5, 0, 1, 1)
self._viterbi_node_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_node_sync_text,
callback=self.set_viterbi_node_sync_text,
label="Viterbi node sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_node_sync_text_static_text, 2, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.fec_decode_viterbi_bpsk_fb_0 = fec.decode_viterbi_bpsk_fb(viterbi_sync_check, viterbi_sync_threshold, viterbi_insync_frames, viterbi_outsync_frames, viterbi_outsync_frames*3)
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(sps, clock_alpha_sl*clock_alpha_sl/4.0, 0.5, clock_alpha_sl, 0.05)
self.gr_complex_to_real_0 = gr.complex_to_real(1)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(pll_alpha_sl, pll_alpha_sl*pll_alpha_sl/4.0, 0.07, -0.07, 2)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vcc((1, ))
self.gr_null_sink_0 = gr.null_sink(gr.sizeof_char*1)
self.gr_packed_to_unpacked_xx_0 = gr.packed_to_unpacked_bb(1, gr.GR_MSB_FIRST)
self.poesweather_metop_cadu_deframer_0 = poesweather.metop_cadu_deframer(True, 1024, deframer_insync_frames, deframer_outsync_frames)
self.root_raised_cosine_filter_0 = gr.fir_filter_ccf(1, firdes.root_raised_cosine(
1, samp_rate, symb_rate, 0.25, int(11*samp_rate/symb_rate)))
self.usrp_simple_source = grc_usrp.simple_source_c(which=0, side=side, rx_ant="RXA")
self.usrp_simple_source.set_decim_rate(decim_tb)
self.usrp_simple_source.set_frequency(freq_tb, verbose=True)
self.usrp_simple_source.set_gain(gain_tb)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=2,
y_divs=10,
ref_level=12,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_fftsink2 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=2,
y_divs=10,
ref_level=12,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="RRC filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink2.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="BPSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.usrp_simple_source, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.root_raised_cosine_filter_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.gr_complex_to_real_0, 0))
self.connect((self.fec_decode_viterbi_bpsk_fb_0, 0), (self.gr_packed_to_unpacked_xx_0, 0))
self.connect((self.gr_packed_to_unpacked_xx_0, 0), (self.poesweather_metop_cadu_deframer_0, 0))
self.connect((self.gr_complex_to_real_0, 0), (self.fec_decode_viterbi_bpsk_fb_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_multiply_const_vxx_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.root_raised_cosine_filter_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.wxgui_scopesink2_1, 0))
self.connect((self.root_raised_cosine_filter_0, 0), (self.wxgui_fftsink2, 0))
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.poesweather_metop_cadu_deframer_0, 0), (self.gr_null_sink_0, 0))
def __init__(self, decim=160):
grc_wxgui.top_block_gui.__init__(
self, title="LRIT Receiver (from capture file)")
##################################################
# Parameters
##################################################
self.decim = decim
##################################################
# Variables
##################################################
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self.symbol_rate = symbol_rate = 293e3
self._saved_gain_mu_config = ConfigParser.ConfigParser()
self._saved_gain_mu_config.read(config_filename)
try:
saved_gain_mu = self._saved_gain_mu_config.getfloat(
'usrp_rx_lrit', 'gain_mu')
except:
saved_gain_mu = 0.2
self.saved_gain_mu = saved_gain_mu
self._saved_costas_alpha_config = ConfigParser.ConfigParser()
self._saved_costas_alpha_config.read(config_filename)
try:
saved_costas_alpha = self._saved_costas_alpha_config.getfloat(
'usrp_rx_lrit', 'costas_alpha')
except:
saved_costas_alpha = 0.2
self.saved_costas_alpha = saved_costas_alpha
self.sample_rate = sample_rate = 64e6 / decim
self.sps = sps = sample_rate / symbol_rate
self.gain_mu = gain_mu = saved_gain_mu
self.costas_alpha = costas_alpha = saved_costas_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "USRP RX")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "RRC Filter")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "PLL")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "MM")
self.GridAdd(self.displays, 1, 0, 1, 2)
##################################################
# Controls
##################################################
_gain_mu_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_mu_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
label="Gain Mu",
converter=forms.float_converter(),
proportion=0,
)
self._gain_mu_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_mu_sizer, 0, 1, 1, 1)
_costas_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._costas_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
label="Costas Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._costas_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_costas_alpha_sizer, 0, 0, 1, 1)
##################################################
# Blocks
##################################################
self.costas = gr.costas_loop_cc(costas_alpha, (costas_alpha**2) / 4.0,
50e-6 * sps, -50e-6 * sps, 2)
self.costas_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(2).GetWin(),
baseband_freq=0,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=None,
title="PLL Spectrum",
peak_hold=False,
win=window.hanning,
)
self.displays.GetPage(2).GridAdd(self.costas_spectrum.win, 0, 0, 1, 1)
self.costas_spectrum_0 = fftsink2.fft_sink_c(
self.displays.GetPage(3).GetWin(),
baseband_freq=0,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=symbol_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=None,
title="Bit Sync Spectrum",
peak_hold=False,
win=window.hanning,
)
self.displays.GetPage(3).GridAdd(self.costas_spectrum_0.win, 0, 0, 1,
1)
self.costas_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(2).GetWin(),
title="PLL Waveform",
sample_rate=sample_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(2).GridAdd(self.costas_waveform.win, 1, 0, 1, 1)
self.gr_agc_xx_0 = gr.agc_cc(1e-6, 1.0, 1.0 / 32767.0, 1.0)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(
sps, (gain_mu**2) / 4.0, 0.5, gain_mu, 50e-6)
self.gr_file_source_0 = gr.file_source(gr.sizeof_gr_complex * 1,
"lrit.dat", False)
self.gr_throttle_0 = gr.throttle(gr.sizeof_gr_complex * 1, sample_rate)
self.mm_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(3).GetWin(),
title="Constellation",
sample_rate=symbol_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / symbol_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.displays.GetPage(3).GridAdd(self.mm_waveform.win, 1, 0, 1, 1)
self.rrc = gr.fir_filter_ccf(
1,
firdes.root_raised_cosine(1, sample_rate, symbol_rate, 0.25,
int(11 * sample_rate / symbol_rate)))
self.rrc_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(1).GetWin(),
baseband_freq=0,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=None,
title="RRC Spectrum",
peak_hold=False,
win=window.hanning,
)
self.displays.GetPage(1).GridAdd(self.rrc_spectrum.win, 0, 0, 1, 1)
self.rx_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=50,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=True,
avg_alpha=None,
title="Baseband Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).GridAdd(self.rx_spectrum.win, 0, 0, 1, 1)
self.rx_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(0).GetWin(),
title="Baseband Waveform",
sample_rate=sample_rate,
v_scale=0,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(0).GridAdd(self.rx_waveform.win, 1, 0, 1, 1)
self.rx_waveform_0 = scopesink2.scope_sink_c(
self.displays.GetPage(1).GetWin(),
title="RRC Waveform",
sample_rate=sample_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.rx_waveform_0.win, 1, 0, 1, 1)
##################################################
# Connections
##################################################
self.connect((self.rrc, 0), (self.rx_waveform_0, 0))
self.connect((self.rrc, 0), (self.rrc_spectrum, 0))
self.connect((self.gr_agc_xx_0, 0), (self.rrc, 0))
self.connect((self.gr_throttle_0, 0), (self.rx_waveform, 0))
self.connect((self.gr_throttle_0, 0), (self.rx_spectrum, 0))
self.connect((self.gr_throttle_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
self.connect((self.rrc, 0), (self.costas, 0))
self.connect((self.costas, 0), (self.costas_spectrum, 0))
self.connect((self.costas, 0), (self.costas_waveform, 0))
self.connect((self.costas, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.costas_spectrum_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.mm_waveform, 0))
def __init__(self):
gr.top_block.__init__(self)
usage=("%prog: [options] output_filename.\nSpecial output_filename" + \
"\"sdl\" will use video_sink_sdl as realtime output window. " + \
"You then need to have gr-video-sdl installed.\n" +\
"Make sure your input capture file containes interleaved " + \
"shorts not complex floats")
parser = OptionParser(option_class=eng_option, usage=usage)
parser.add_option("-a",
"--args",
type="string",
default="",
help="UHD device address args [default=%default]")
parser.add_option("",
"--spec",
type="string",
default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A",
"--antenna",
type="string",
default=None,
help="select Rx Antenna where appropriate")
parser.add_option("-s",
"--samp-rate",
type="eng_float",
default=1e6,
help="set sample rate")
parser.add_option("-c",
"--contrast",
type="eng_float",
default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b",
"--brightness",
type="eng_float",
default=0.0,
help="set brightness (default is 0)")
parser.add_option("-i", "--in-filename", type="string", default=None,
help="Use input file as source. samples must be " + \
"interleaved shorts \n Use usrp_rx_file.py or " + \
"usrp_rx_cfile.py --output-shorts.\n Special " + \
"name \"usrp\" results in realtime capturing " + \
"and processing using usrp.\n" + \
"You then probably need a decimation factor of 64 or higher.")
parser.add_option(
"-f",
"--freq",
type="eng_float",
default=519.25e6,
help=
"set frequency to FREQ.\nNote that the frequency of the video carrier is not at the middle of the TV channel",
metavar="FREQ")
parser.add_option("-g",
"--gain",
type="eng_float",
default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-p",
"--pal",
action="store_true",
default=False,
help="PAL video format (this is the default)")
parser.add_option("-n",
"--ntsc",
action="store_true",
default=False,
help="NTSC video format")
parser.add_option("-r",
"--repeat",
action="store_false",
default=True,
help="repeat in_file in a loop")
parser.add_option("-N",
"--nframes",
type="eng_float",
default=None,
help="number of frames to collect [default=+inf]")
parser.add_option("",
"--freq-min",
type="eng_float",
default=50.25e6,
help="Set a minimum frequency [default=%default]")
parser.add_option("",
"--freq-max",
type="eng_float",
default=900.25e6,
help="Set a maximum frequency [default=%default]")
(options, args) = parser.parse_args()
if not (len(args) == 1):
parser.print_help()
sys.stderr.write('You must specify the output. FILENAME or sdl \n')
sys.exit(1)
filename = args[0]
self.tv_freq_min = options.freq_min
self.tv_freq_max = options.freq_max
if options.in_filename is None:
parser.print_help()
sys.stderr.write(
'You must specify the input -i FILENAME or -i usrp\n')
raise SystemExit, 1
if not (filename == "sdl"):
options.repeat = False
input_rate = options.samp_rate
print "video sample rate %s" % (eng_notation.num_to_str(input_rate))
if not (options.in_filename == "usrp"):
# file is data source, capture with usr_rx_csfile.py
self.filesource = gr.file_source(gr.sizeof_short,
options.in_filename,
options.repeat)
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource, self.istoc)
self.src = self.istoc
else:
if options.freq is None:
parser.print_help()
sys.stderr.write(
'You must specify the frequency with -f FREQ\n')
raise SystemExit, 1
# build the graph
self.u = uhd.usrp_source(device_addr=options.args,
stream_args=uhd.stream_args('fc32'))
# Set the subdevice spec
if (options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if (options.antenna):
self.u.set_antenna(options.antenna, 0)
self.u.set_samp_rate(input_rate)
dev_rate = self.u.get_samp_rate()
self.src = self.u
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.u.get_gain_range()
options.gain = float(g.start() + g.stop()) / 2.0
self.u.set_gain(options.gain)
r = self.u.set_center_freq(options.freq)
if not r:
sys.stderr.write('Failed to set frequency\n')
raise SystemExit, 1
self.agc = gr.agc_cc(1e-7, 1.0, 1.0) #1e-7
self.am_demod = gr.complex_to_mag()
self.set_blacklevel = gr.add_const_ff(options.brightness + 255.0)
self.invert_and_scale = gr.multiply_const_ff(-options.contrast *
128.0 * 255.0 / (200.0))
self.f2uc = gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal = True #set default to PAL
if options.pal:
lines_per_frame = 625.0
frames_per_sec = 25.0
show_width = 768
elif options.ntsc:
lines_per_frame = 525.0
frames_per_sec = 29.97002997
show_width = 640
width = int(input_rate / (lines_per_frame * frames_per_sec))
height = int(lines_per_frame)
if filename == "sdl":
#Here comes the tv screen, you have to build and install
#gr-video-sdl for this (subproject of gnuradio, only in cvs
#for now)
try:
video_sink = video_sdl.sink_uc(frames_per_sec, width, height,
0, show_width, height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst = video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " + str(width) + "x" + str(
height) + " gray:" + filename
print "(Use the spacebar to advance to next frames)"
file_sink = gr.file_sink(gr.sizeof_char, filename)
self.dst = file_sink
if options.nframes is None:
self.connect(self.src, self.agc)
else:
self.head = gr.head(gr.sizeof_gr_complex,
int(options.nframes * width * height))
self.connect(self.src, self.head, self.agc)
self.connect(self.agc, self.am_demod, self.invert_and_scale,
self.set_blacklevel, self.f2uc, self.dst)
def __init__(self, options):
gr.hier_block2.__init__(self, "bpsk_demodulator",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
grc_wxgui.top_block_gui.__init__(self, title="Top Block")
self._samples_per_symbol = options.samples_per_symbol
# Number of bits per symbol
self._bits_per_symbol = 1
# Create AGC to scale input to unity
self._agc = gr.agc_cc(1e-5, 1.0, 1.0, 1.0)
# Create RRC with specified excess bandwidth
taps = gr.firdes.root_raised_cosine(1.0, # Gain
self._samples_per_symbol, # Sampling rate
1.0, # Symbol rate
0.35, # Roll-off factor
11*self._samples_per_symbol) # Number of taps
self._rrc = gr.fir_filter_ccf(1, taps)
# Create a Costas loop frequency/phase recovery block
self._costas = digital.costas_loop_cc(6.28/100.0, 2)
self.gr_null_sink_f1 = gr.null_sink(gr.sizeof_float*1)
# Create a M&M bit synchronization retiming block
self._mm = digital.clock_recovery_mm_cc(self._samples_per_symbol, # Initial samples/symbol
1e-06, # Second order gain
0.5, # Initial symbol phase
0.001, # First order gain
0.0001) # Maximum timing offset
# Add an SNR probe on the demodulated constellation
#self._snr_probe = gr.probe_mpsk_snr_c(10.0/symbol_rate)
self._symbol_rate = options.data_rate / self._bits_per_symbol
#self._snr_probe = digital.mpsk_snr_est_cc(0, 10000, 0.001) # 0 at the first mean Simple
self._snr_probe = digital.probe_mpsk_snr_est_c(digital.SNR_EST_M2M4, alpha=10.0/self._symbol_rate)
#self._snr_probe = digital.mpsk_snr_est_cc(digital.SNR_EST_SIMPLE, alpha=10.0/self._symbol_rate)
# Slice the resulting constellation into bits.
# Get inphase channel and make decision about 0
self._c2r = gr.complex_to_real()
self._slicer = digital.binary_slicer_fb()
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 31) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
# self._ber = gr.probe_density_b(1.0/symbol_rate)
self._ber = grc_blks2.error_rate(type='BER',
win_size=1000,
bits_per_symbol=1)
#self.create_number_sink(self._samples_per_symbol)
self.gr_null_sink_f2 = gr.null_sink(gr.sizeof_float*1)
#Create a vector source reference to calculate BER
self._vector_source_ref = gr.vector_source_b(([1,]), True, 1)
#create a comparator
self.comparator = howto.compare_vector_cci((1, 1, 1, 1 ,0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1), (0,0, 1, 1, 0,0), 5, 0, True)
#Connection of blocks
#"""""""""""""""""""""""""""""""""-->_snr_probe-->gr_null_sink_cc
# agc --> _rrc --> costas --> _mm --> _c2r --> _slicer --> _descrambler --> _ber --> gr_null_sink_f2
#"""""""""""""""""""""""""--> gr_null_sink_f1 "" _vector_source_ref-->
#
# self.connect(self, self._agc, self._rrc, self._costas, self._mm,
# self._c2r, self._slicer, self._descrambler, self.comparator, (self._ber, 1))
#
self.connect(self, self._agc, self._rrc, self._costas, self._mm,
self._c2r, self._slicer, self._descrambler, (self._ber, 1))
self.connect((self._costas, 1), (self.gr_null_sink_f1, 0))
self.connect(self._mm, self._snr_probe)
self.connect(self._vector_source_ref, (self._ber,0))
self.connect(self._ber, self.gr_null_sink_f2)
def __init__(self, sync_check=False, decim=32, freq=1698e6, gain=35, side="A", frames_file=os.environ['HOME'] + '/NOAA-XX.hrpt', satellite='NOAA-XX'):
gr.top_block.__init__(self, "USRP NOAA HRPT Receiver")
##################################################
# Parameters
##################################################
self.sync_check = sync_check
self.decim = decim
self.freq = freq
self.gain = gain
self.side = side
self.frames_file = frames_file
self.satellite = satellite
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.samp_rate = samp_rate = 64e6/decim
self.sps = sps = samp_rate/sym_rate
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/noaa_hrpt.conf'
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat("satname", 'pll_alpha')
except: saved_pll_alpha = 0.005
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try: saved_gain = self._saved_gain_config.getfloat("satname", 'gain')
except: saved_gain = gain
self.saved_gain = saved_gain
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat("satname", 'clock_alpha')
except: saved_clock_alpha = 0.001
self.saved_clock_alpha = saved_clock_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.hs = hs = int(sps/2.0)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-5, 1.0, 1.0/32768.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, saved_clock_alpha**2/4.0, 0.5, saved_clock_alpha, max_clock_offset)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short*1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True,False)
self.pll = noaa.hrpt_pll_cf(saved_pll_alpha, saved_pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_noaa_hrpt_deframer_0 = poesweather.noaa_hrpt_deframer(sync_check)
self.usrp_simple_source_x_0 = grc_usrp.simple_source_s(which=0, side=side, rx_ant="RXA")
self.usrp_simple_source_x_0.set_decim_rate(decim)
self.usrp_simple_source_x_0.set_frequency(freq, verbose=True)
self.usrp_simple_source_x_0.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.usrp_simple_source_x_0, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.gr_file_sink_0_0, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_noaa_hrpt_deframer_0, 0))
def __init__(self, options):
gr.top_block.__init__(self)
self.options = options
(dev_rate, channel_rate, audio_rate, channel_pass, channel_stop,
demod) = demod_params[options.modulation]
DEV = uhd_src(
options.args, # UHD device address
options.spec, # device subdev spec
options.antenna, # device antenna
dev_rate, # device sample rate
options.gain, # Receiver gain
options.calibration) # Frequency offset
DEV.tune(options.frequency)
if_rate = DEV.rate()
channel_decim = int(if_rate // channel_rate)
audio_decim = int(channel_rate // audio_rate)
CHAN_taps = optfir.low_pass(
1.0, # Filter gain
if_rate, # Sample rate
channel_pass, # One sided modulation bandwidth
channel_stop, # One sided channel bandwidth
0.1, # Passband ripple
60) # Stopband attenuation
CHAN = gr.freq_xlating_fir_filter_ccf(
channel_decim, # Decimation rate
CHAN_taps, # Filter taps
0.0, # Offset frequency
if_rate) # Sample rate
RFSQL = gr.pwr_squelch_cc(
options.rf_squelch, # Power threshold
125.0 / channel_rate, # Time constant
int(channel_rate / 20), # 50ms rise/fall
False) # Zero, not gate output
AGC = gr.agc_cc(
1.0 / channel_rate, # Time constant
1.0, # Reference power
1.0, # Initial gain
1.0) # Maximum gain
DEMOD = demod(channel_rate, audio_decim)
# From RF to audio
#self.connect(DEV, CHAN, RFSQL, AGC, DEMOD)
self.connect(DEV, CHAN, DEMOD)
# Optionally add CTCSS and RSAMP if needed
tail = DEMOD
if options.ctcss != None and options.ctcss > 60.0:
CTCSS = gr.ctcss_squelch_ff(
audio_rate, # Sample rate
options.ctcss) # Squelch tone
self.connect(DEMOD, CTCSS)
tail = CTCSS
if options.output_rate != audio_rate:
out_lcm = gru.lcm(audio_rate, options.output_rate)
out_interp = int(out_lcm // audio_rate)
out_decim = int(out_lcm // options.output_rate)
RSAMP = blks2.rational_resampler_fff(out_interp, out_decim)
self.connect(tail, RSAMP)
tail = RSAMP
# Send to audio output device
AUDIO = audio.sink(int(options.output_rate), options.audio_output)
self.connect(tail, AUDIO)
def __init__(self):
gr.top_block.__init__(self)
usage="%prog: [options] output_filename. \n Special output_filename \"sdl\" will use video_sink_sdl as realtime output window. " \
"You then need to have gr-video-sdl installed. \n" \
"Make sure your input capture file containes interleaved shorts not complex floats"
parser = OptionParser(option_class=eng_option, usage=usage)
parser.add_option("-R",
"--rx-subdev-spec",
type="subdev",
default=(0, 0),
help="select USRP Rx side A or B (default=A)")
parser.add_option("-c",
"--contrast",
type="eng_float",
default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b",
"--brightness",
type="eng_float",
default=0.0,
help="set brightness (default is 0)")
parser.add_option(
"-d",
"--decim",
type="int",
default=8,
help="set fgpa decimation rate to DECIM [default=%default]")
parser.add_option(
"-i",
"--in-filename",
type="string",
default=None,
help=
"Use input file as source. samples must be interleaved shorts \n "
+ "Use usrp_rx_file.py or usrp_rx_cfile.py --output-shorts. \n"
"Special name \"usrp\" results in realtime capturing and processing using usrp. \n"
+ "You then probably need a decimation factor of 64 or higher.")
parser.add_option(
"-f",
"--freq",
type="eng_float",
default=None,
help=
"set frequency to FREQ.\nNote that the frequency of the video carrier is not at the middle of the TV channel",
metavar="FREQ")
parser.add_option("-g",
"--gain",
type="eng_float",
default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-p",
"--pal",
action="store_true",
default=False,
help="PAL video format (this is the default)")
parser.add_option("-n",
"--ntsc",
action="store_true",
default=False,
help="NTSC video format")
parser.add_option("-r",
"--repeat",
action="store_false",
default=True,
help="repeat in_file in a loop")
parser.add_option("-8",
"--width-8",
action="store_true",
default=False,
help="Enable 8-bit samples across USB")
parser.add_option("-N",
"--nframes",
type="eng_float",
default=None,
help="number of frames to collect [default=+inf]")
parser.add_option("--no-hb",
action="store_true",
default=False,
help="don't use halfband filter in usrp")
(options, args) = parser.parse_args()
if not (len(args) == 1):
parser.print_help()
sys.stderr.write('You must specify the output. FILENAME or sdl \n')
sys.exit(1)
filename = args[0]
if options.in_filename is None:
parser.print_help()
sys.stderr.write(
'You must specify the input -i FILENAME or -i usrp\n')
raise SystemExit, 1
if not (filename == "sdl"):
options.repeat = False
if not (options.in_filename == "usrp"):
self.filesource = gr.file_source(
gr.sizeof_short, options.in_filename, options.repeat
) # file is data source, capture with usr_rx_csfile.py
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource, self.istoc)
self.adc_rate = 64e6
self.src = self.istoc
else:
if options.freq is None:
parser.print_help()
sys.stderr.write(
'You must specify the frequency with -f FREQ\n')
raise SystemExit, 1
if abs(options.freq) < 1e6:
options.freq *= 1e6
if options.no_hb or (options.decim < 8):
self.fpga_filename = "std_4rx_0tx.rbf" #contains 4 Rx paths without halfbands and 0 tx paths
else:
self.fpga_filename = "std_2rxhb_2tx.rbf" # contains 2 Rx paths with halfband filters and 2 tx paths (the default)
# build the graph
self.u = usrp.source_c(decim_rate=options.decim,
fpga_filename=self.fpga_filename)
self.src = self.u
if options.width_8:
sample_width = 8
sample_shift = 8
format = self.u.make_format(sample_width, sample_shift)
r = self.u.set_format(format)
self.adc_rate = self.u.adc_freq()
if options.rx_subdev_spec is None:
options.rx_subdev_spec = usrp.pick_rx_subdevice(self.u)
self.u.set_mux(
usrp.determine_rx_mux_value(self.u, options.rx_subdev_spec))
# determine the daughterboard subdevice we're using
self.subdev = usrp.selected_subdev(self.u, options.rx_subdev_spec)
print "Using RX d'board %s" % (self.subdev.side_and_name(), )
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.subdev.gain_range()
options.gain = float(g[0] + g[1]) / 2
self.subdev.set_gain(options.gain)
r = self.u.tune(0, self.subdev, options.freq)
if not r:
sys.stderr.write('Failed to set frequency\n')
raise SystemExit, 1
input_rate = self.adc_rate / options.decim
print "video sample rate %s" % (eng_notation.num_to_str(input_rate))
self.agc = gr.agc_cc(1e-7, 1.0, 1.0) #1e-7
self.am_demod = gr.complex_to_mag()
self.set_blacklevel = gr.add_const_ff(options.brightness + 255.0)
self.invert_and_scale = gr.multiply_const_ff(-options.contrast *
128.0 * 255.0 / (200.0))
self.f2uc = gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal = True #set default to PAL
if options.pal:
lines_per_frame = 625.0
frames_per_sec = 25.0
show_width = 768
elif options.ntsc:
lines_per_frame = 525.0
frames_per_sec = 29.97002997
show_width = 640
width = int(input_rate / (lines_per_frame * frames_per_sec))
height = int(lines_per_frame)
if filename == "sdl":
#Here comes the tv screen, you have to build and install gr-video-sdl for this (subproject of gnuradio, only in cvs for now)
try:
video_sink = video_sdl.sink_uc(frames_per_sec, width, height,
0, show_width, height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst = video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " + str(width) + "x" + str(
height) + " gray:" + filename
print "(Use the spacebar to advance to next frames)"
file_sink = gr.file_sink(gr.sizeof_char, filename)
self.dst = file_sink
if options.nframes is None:
self.connect(self.src, self.agc)
else:
self.head = gr.head(gr.sizeof_gr_complex,
int(options.nframes * width * height))
self.connect(self.src, self.head, self.agc)
self.connect(self.agc, self.am_demod, self.invert_and_scale,
self.set_blacklevel, self.f2uc, self.dst)
def __init__(self, frames_file=os.environ['HOME'] + '/NOAA-XX.hrpt', decim=32, satellite='NOAA-XX', baseband_file=os.environ['HOME'] + '/NOAA-XX.dat', sync_check=False):
grc_wxgui.top_block_gui.__init__(self, title="NOAA HRPT Baseband To Frames")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.frames_file = frames_file
self.decim = decim
self.satellite = satellite
self.baseband_file = baseband_file
self.sync_check = sync_check
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/noaa_hrpt.conf'
self.sps = sps = sample_rate/sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat("satname", 'pll_alpha')
except: saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat("satname", 'clock_alpha')
except: saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.sync_check_txt = sync_check_txt = sync_check
self.satname_txt = satname_txt = satellite
self.pll_alpha = pll_alpha = saved_pll_alpha
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
self.frames_file_txt = frames_file_txt = frames_file
self.decim_txt = decim_txt = decim
self.clock_alpha = clock_alpha = saved_clock_alpha
self.baseband_file_txt = baseband_file_txt = baseband_file
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "NOAA HRPT Spectrum")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Information")
self.Add(self.displays)
##################################################
# Controls
##################################################
self._sync_check_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.sync_check_txt,
callback=self.set_sync_check_txt,
label="Sync check",
converter=forms.int_converter(),
)
self.GridAdd(self._sync_check_txt_static_text, 0, 3, 1, 1)
self._satname_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.satname_txt,
callback=self.set_satname_txt,
label="Satellite",
converter=forms.str_converter(),
)
self.GridAdd(self._satname_txt_static_text, 0, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 1, 0, 1, 1)
self._frames_file_txt_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.frames_file_txt,
callback=self.set_frames_file_txt,
label="Frames output filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._frames_file_txt_static_text, 2, 0, 1, 1)
self._decim_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.decim_txt,
callback=self.set_decim_txt,
label="Decimation",
converter=forms.str_converter(),
)
self.GridAdd(self._decim_txt_static_text, 0, 1, 1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 1, 1, 1, 1)
self._baseband_file_txt_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.baseband_file_txt,
callback=self.set_baseband_file_txt,
label="Baseband filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._baseband_file_txt_static_text, 1, 0, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True,False)
self.frame_sink = gr.file_sink(gr.sizeof_short*1, "/home/jerry/NOAA-XX.hrpt")
self.frame_sink.set_unbuffered(False)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short*1, "/home/jerry/hrpt/baseband/NOAA-18/2011-01-07T132821-NOAA-18.dat", False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_noaa_hrpt_deframer_0 = poesweather.noaa_hrpt_deframer(sync_check)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=45,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="NOAA HRPT Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).Add(self.rx_fft.win)
self.throttle = gr.throttle(gr.sizeof_short*1, sample_rate*10)
##################################################
# Connections
##################################################
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.throttle, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.frame_sink, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.decoder, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_noaa_hrpt_deframer_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
def __init__(self, input_filename="usrp.dat", decim=32):
grc_wxgui.top_block_gui.__init__(self, title="USRP HRPT Receiver")
##################################################
# Parameters
##################################################
self.input_filename = input_filename
self.decim = decim
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 64e6 / decim
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self.sps = sps = sample_rate / sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat(
'usrp_rx_hrpt', 'pll_alpha')
except:
saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try:
saved_clock_alpha = self._saved_clock_alpha_config.getfloat(
'usrp_rx_hrpt', 'clock_alpha')
except:
saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.pll_alpha = pll_alpha = saved_pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try:
output_filename = self._output_filename_config.get(
'usrp_rx_hrpt', 'filename')
except:
output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.hs = hs = int(sps / 2.0)
self.clock_alpha = clock_alpha = saved_clock_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Spectrum")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Demod")
self.GridAdd(self.displays, 1, 0, 1, 2)
##################################################
# Controls
##################################################
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 0, 0, 1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 0, 1, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True, False)
self.deframer = noaa.hrpt_deframer()
self.demod_scope = scopesink2.scope_sink_f(
self.displays.GetPage(1).GetWin(),
title="Post-Demod",
sample_rate=sym_rate * 2.0,
v_scale=0.5,
v_offset=0,
t_scale=10.0 / sym_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.demod_scope.win, 0, 0, 1, 1)
self.frame_sink = gr.file_sink(gr.sizeof_short * 1, output_filename)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short * 1,
input_filename, False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex(
)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=8,
ref_level=-5,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=True,
avg_alpha=0.1,
title="RX Spectrum",
peak_hold=False,
size=(640, 360),
)
self.displays.GetPage(0).GridAdd(self.rx_fft.win, 0, 0, 1, 1)
self.throttle = gr.throttle(gr.sizeof_short * 1, 2 * sample_rate)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.demod_scope, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.agc, 0))
self.connect((self.throttle, 0),
(self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.deframer, 0))
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 4e6
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self.sps = sps = sample_rate / sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat(
'usrp_rx_hrpt', 'pll_alpha')
except:
saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try:
saved_gain = self._saved_gain_config.getfloat(
'usrp_rx_hrpt', 'gain')
except:
saved_gain = 35
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try:
saved_freq = self._saved_freq_config.getfloat(
'usrp_rx_hrpt', 'freq')
except:
saved_freq = 1698e6
self.saved_freq = saved_freq
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try:
saved_clock_alpha = self._saved_clock_alpha_config.getfloat(
'usrp_rx_hrpt', 'clock_alpha')
except:
saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self._addr_config = ConfigParser.ConfigParser()
self._addr_config.read(config_filename)
try:
addr = self._addr_config.get('usrp_rx_hrpt', 'addr')
except:
addr = ""
self.addr = addr
self.rate_text = rate_text = sample_rate
self.pll_alpha = pll_alpha = saved_pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try:
output_filename = self._output_filename_config.get(
'usrp_rx_hrpt', 'filename')
except:
output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.hs = hs = int(sps / 2.0)
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.clock_alpha = clock_alpha = saved_clock_alpha
self.addr_text = addr_text = addr
##################################################
# Blocks
##################################################
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_text_box, 0, 0, 1, 1)
self.displays = self.displays = wx.Notebook(self.GetWin(),
style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Spectrum")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Demod")
self.GridAdd(self.displays, 2, 0, 1, 4)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 0, 3, 1, 1)
self.uhd_usrp_source_0 = uhd.usrp_source(
device_addr=addr,
io_type=uhd.io_type.COMPLEX_FLOAT32,
num_channels=1,
)
self.uhd_usrp_source_0.set_samp_rate(sample_rate)
self.uhd_usrp_source_0.set_center_freq(freq, 0)
self.uhd_usrp_source_0.set_gain(0, 0)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=8,
ref_level=-5,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=True,
avg_alpha=0.1,
title="RX Spectrum",
peak_hold=False,
size=(640, 360),
)
self.displays.GetPage(0).GridAdd(self.rx_fft.win, 0, 0, 1, 1)
self._rate_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.rate_text,
callback=self.set_rate_text,
label="Baseband Rate",
converter=forms.float_converter(),
)
self.GridAdd(self._rate_text_static_text, 1, 1, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 0, 2, 1, 1)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="RX Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 0, 1, 1, 1)
self.frame_sink = gr.file_sink(gr.sizeof_short * 1, output_filename)
self.frame_sink.set_unbuffered(False)
self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
self.demod_scope = scopesink2.scope_sink_f(
self.displays.GetPage(1).GetWin(),
title="Post-Demod",
sample_rate=sym_rate * 2.0,
v_scale=0.5,
v_offset=0,
t_scale=10.0 / sym_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
trig_mode=gr.gr_TRIG_MODE_AUTO,
y_axis_label="Counts",
)
self.displays.GetPage(1).GridAdd(self.demod_scope.win, 0, 0, 1, 1)
self.deframer = noaa.hrpt_deframer()
self.decoder = noaa.hrpt_decoder(True, True)
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self._addr_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.addr_text,
callback=self.set_addr_text,
label="USRP Addr",
converter=forms.str_converter(),
)
self.GridAdd(self._addr_text_static_text, 1, 0, 1, 1)
##################################################
# Connections
##################################################
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.uhd_usrp_source_0, 0), (self.agc, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.demod_scope, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.digital_clock_recovery_mm_xx_0, 0))
self.connect((self.digital_clock_recovery_mm_xx_0, 0),
(self.digital_binary_slicer_fb_0, 0))
self.connect((self.digital_binary_slicer_fb_0, 0), (self.deframer, 0))
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP LRIT Receiver")
##################################################
# Variables
##################################################
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self._saved_decim_config = ConfigParser.ConfigParser()
self._saved_decim_config.read(config_filename)
try:
saved_decim = self._saved_decim_config.getint(
'usrp_rx_lrit', 'decim')
except:
saved_decim = 160
self.saved_decim = saved_decim
self.decim = decim = saved_decim
self.symbol_rate = symbol_rate = 293e3
self._saved_offset_config = ConfigParser.ConfigParser()
self._saved_offset_config.read(config_filename)
try:
saved_offset = self._saved_offset_config.getfloat(
'usrp_rx_lrit', 'offset')
except:
saved_offset = 0
self.saved_offset = saved_offset
self._saved_gain_mu_config = ConfigParser.ConfigParser()
self._saved_gain_mu_config.read(config_filename)
try:
saved_gain_mu = self._saved_gain_mu_config.getfloat(
'usrp_rx_lrit', 'gain_mu')
except:
saved_gain_mu = 0.005
self.saved_gain_mu = saved_gain_mu
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try:
saved_gain = self._saved_gain_config.getfloat(
'usrp_rx_lrit', 'gain')
except:
saved_gain = 33
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try:
saved_freq = self._saved_freq_config.getfloat(
'usrp_rx_lrit', 'freq')
except:
saved_freq = 1691e6
self.saved_freq = saved_freq
self._saved_costas_alpha_config = ConfigParser.ConfigParser()
self._saved_costas_alpha_config.read(config_filename)
try:
saved_costas_alpha = self._saved_costas_alpha_config.getfloat(
'usrp_rx_lrit', 'costas_alpha')
except:
saved_costas_alpha = 0.005
self.saved_costas_alpha = saved_costas_alpha
self.sample_rate = sample_rate = 64e6 / decim
self.sps = sps = sample_rate / symbol_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try:
side = self._side_config.get('usrp_rx_lrit', 'side')
except:
side = 'A'
self.side = side
self.offset = offset = saved_offset
self.gain_mu = gain_mu = saved_gain_mu
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.costas_alpha = costas_alpha = saved_costas_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "USRP RX")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "RRC")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "PLL")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Const")
self.GridAdd(self.displays, 2, 0, 1, 3)
##################################################
# Controls
##################################################
self._decim_text_box = forms.text_box(
parent=self.GetWin(),
value=self.decim,
callback=self.set_decim,
label="Decim",
converter=forms.int_converter(),
)
self.GridAdd(self._decim_text_box, 0, 2, 1, 1)
_offset_sizer = wx.BoxSizer(wx.VERTICAL)
self._offset_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_offset_sizer,
value=self.offset,
callback=self.set_offset,
label="Offset",
converter=forms.float_converter(),
proportion=0,
)
self._offset_slider = forms.slider(
parent=self.GetWin(),
sizer=_offset_sizer,
value=self.offset,
callback=self.set_offset,
minimum=-50e3,
maximum=50e3,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_offset_sizer, 0, 1, 1, 1)
_gain_mu_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_mu_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
label="Gain Mu",
converter=forms.float_converter(),
proportion=0,
)
self._gain_mu_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_mu_sizer,
value=self.gain_mu,
callback=self.set_gain_mu,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_mu_sizer, 1, 2, 1, 1)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=115,
num_steps=115,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 1, 0, 1, 1)
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_text_box, 0, 0, 1, 1)
_costas_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._costas_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
label="Costas Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._costas_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_costas_alpha_sizer,
value=self.costas_alpha,
callback=self.set_costas_alpha,
minimum=0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_costas_alpha_sizer, 1, 1, 1, 1)
##################################################
# Blocks
##################################################
self.costas = gr.costas_loop_cc(costas_alpha,
(costas_alpha**2.0) / 4.0, 50e-6 * sps,
-50e-6 * sps, 2)
self.costas_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(2).GetWin(),
baseband_freq=freq + offset,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=False,
avg_alpha=None,
title="PLL Spectrum",
peak_hold=False,
)
self.displays.GetPage(2).GridAdd(self.costas_spectrum.win, 0, 0, 1, 1)
self.costas_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(2).GetWin(),
title="PLL Waveform",
sample_rate=sample_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(2).GridAdd(self.costas_waveform.win, 1, 0, 1, 1)
self.gr_agc_xx_0 = gr.agc_cc(1e-6, 1.0, 1.0 / 32767.0, 1.0)
self.mm_const = scopesink2.scope_sink_c(
self.displays.GetPage(3).GetWin(),
title="Constellation",
sample_rate=symbol_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / symbol_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.displays.GetPage(3).GridAdd(self.mm_const.win, 1, 0, 1, 1)
self.mm_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(3).GetWin(),
baseband_freq=0,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=symbol_rate,
fft_size=1024,
fft_rate=15,
average=False,
avg_alpha=None,
title="Bit Sync Spectrum",
peak_hold=False,
)
self.displays.GetPage(3).GridAdd(self.mm_spectrum.win, 0, 0, 1, 1)
self.mm_sync = gr.clock_recovery_mm_cc(sps, (gain_mu**2) / 4.0, 0.5,
gain_mu, 50e-6 * sps)
self.root_raised_cosine_filter_0 = gr.fir_filter_ccf(
1,
firdes.root_raised_cosine(1, sample_rate, symbol_rate, 0.25,
int(11 * sample_rate / symbol_rate)))
self.rrc_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(1).GetWin(),
baseband_freq=freq + offset,
y_per_div=10,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=False,
avg_alpha=None,
title="RRC Spectrum",
peak_hold=False,
)
self.displays.GetPage(1).GridAdd(self.rrc_spectrum.win, 0, 0, 1, 1)
self.rrc_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(1).GetWin(),
title="RRC Waveform",
sample_rate=sample_rate,
v_scale=0.5,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.rrc_waveform.win, 1, 0, 1, 1)
self.rx_spectrum = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=10,
y_divs=10,
ref_level=50,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=30,
average=False,
avg_alpha=None,
title="RX Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).GridAdd(self.rx_spectrum.win, 0, 0, 1, 1)
self.rx_waveform = scopesink2.scope_sink_c(
self.displays.GetPage(0).GetWin(),
title="RX Waveform",
sample_rate=sample_rate,
v_scale=0,
v_offset=0,
t_scale=20.0 / sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(0).GridAdd(self.rx_waveform.win, 1, 0, 1, 1)
self.usrp_simple_source_x_0 = grc_usrp.simple_source_c(which=0,
side=side,
rx_ant="RXA")
self.usrp_simple_source_x_0.set_decim_rate(decim)
self.usrp_simple_source_x_0.set_frequency(freq + offset, verbose=True)
self.usrp_simple_source_x_0.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.gr_agc_xx_0, 0),
(self.root_raised_cosine_filter_0, 0))
self.connect((self.usrp_simple_source_x_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.usrp_simple_source_x_0, 0), (self.rx_spectrum, 0))
self.connect((self.usrp_simple_source_x_0, 0), (self.rx_waveform, 0))
self.connect((self.root_raised_cosine_filter_0, 0),
(self.rrc_waveform, 0))
self.connect((self.root_raised_cosine_filter_0, 0),
(self.rrc_spectrum, 0))
self.connect((self.root_raised_cosine_filter_0, 0), (self.costas, 0))
self.connect((self.costas, 0), (self.costas_spectrum, 0))
self.connect((self.costas, 0), (self.costas_waveform, 0))
self.connect((self.costas, 0), (self.mm_sync, 0))
self.connect((self.mm_sync, 0), (self.mm_spectrum, 0))
self.connect((self.mm_sync, 0), (self.mm_const, 0))
def __init__(self, options):
gr.top_block.__init__(self)
self.options = options
(usrp_decim, channel_decim, audio_decim,
channel_pass, channel_stop, demod) = demod_params[options.modulation]
USRP = usrp_src(options.rx_subdev_spec, # Daugherboard spec
usrp_decim, # IF decimation ratio
options.gain, # Receiver gain
options.calibration) # Frequency offset
USRP.tune(options.frequency)
if_rate = USRP.rate()
channel_rate = if_rate // channel_decim
audio_rate = channel_rate // audio_decim
CHAN_taps = optfir.low_pass(1.0, # Filter gain
if_rate, # Sample rate
channel_pass, # One sided modulation bandwidth
channel_stop, # One sided channel bandwidth
0.1, # Passband ripple
60) # Stopband attenuation
CHAN = gr.freq_xlating_fir_filter_ccf(channel_decim, # Decimation rate
CHAN_taps, # Filter taps
0.0, # Offset frequency
if_rate) # Sample rate
RFSQL = gr.pwr_squelch_cc(options.rf_squelch, # Power threshold
125.0/channel_rate, # Time constant
channel_rate/20, # 50ms rise/fall
False) # Zero, not gate output
AGC = gr.agc_cc(1.0/channel_rate, # Time constant
1.0, # Reference power
1.0, # Initial gain
1.0) # Maximum gain
DEMOD = demod(channel_rate, audio_decim)
# From RF to audio
self.connect(USRP, CHAN, RFSQL, AGC, DEMOD)
# Optionally add CTCSS and RSAMP if needed
tail = DEMOD
if options.ctcss != None and options.ctcss > 60.0:
CTCSS = gr.ctcss_squelch_ff(audio_rate, # Sample rate
options.ctcss) # Squelch tone
self.connect(DEMOD, CTCSS)
tail = CTCSS
if options.output_rate != audio_rate:
out_lcm = gru.lcm(audio_rate, options.output_rate)
out_interp = int(out_lcm // audio_rate)
out_decim = int(out_lcm // options.output_rate)
RSAMP = blks2.rational_resampler_fff(out_interp, out_decim)
self.connect(tail, RSAMP)
tail = RSAMP
# Send to default audio output
AUDIO = audio.sink(options.output_rate, "")
self.connect(tail, AUDIO)
def __init__(self, frame, panel, vbox, argv):
stdgui2.std_top_block.__init__ (self, frame, panel, vbox, argv)
parser=OptionParser(option_class=eng_option)
parser.add_option("-a", "--args", type="string", default="",
help="UHD device address args [default=%default]")
parser.add_option("", "--spec", type="string", default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A", "--antenna", type="string", default=None,
help="select Rx Antenna where appropriate")
parser.add_option("-s", "--samp-rate", type="eng_float", default=1e6,
help="set sample rate (bandwidth) [default=%default]")
parser.add_option("-f", "--freq", type="eng_float", default=1008.0e3,
help="set frequency to FREQ", metavar="FREQ")
parser.add_option("-I", "--use-if-freq", action="store_true", default=False,
help="use intermediate freq (compensates DC problems in quadrature boards)" )
parser.add_option("-g", "--gain", type="eng_float", default=None,
help="set gain in dB (default is maximum)")
parser.add_option("-V", "--volume", type="eng_float", default=None,
help="set volume (default is midpoint)")
parser.add_option("-O", "--audio-output", type="string", default="default",
help="pcm device name. E.g., hw:0,0 or surround51 or /dev/dsp")
(options, args) = parser.parse_args()
if len(args) != 0:
parser.print_help()
sys.exit(1)
self.frame = frame
self.panel = panel
self.use_IF=options.use_if_freq
if self.use_IF:
self.IF_freq=64000.0
else:
self.IF_freq=0.0
self.vol = 0
self.state = "FREQ"
self.freq = 0
# build graph
self.u = uhd.usrp_source(device_addr=options.args, stream_args=uhd.stream_args('fc32'))
# Set the subdevice spec
if(options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if(options.antenna):
self.u.set_antenna(options.antenna, 0)
usrp_rate = 256e3
demod_rate = 64e3
audio_rate = 32e3
chanfilt_decim = int(usrp_rate // demod_rate)
audio_decim = int(demod_rate // audio_rate)
self.u.set_samp_rate(usrp_rate)
dev_rate = self.u.get_samp_rate()
# Resample signal to exactly self.usrp_rate
# FIXME: make one of the follow-on filters an arb resampler
rrate = usrp_rate / dev_rate
self.resamp = blks2.pfb_arb_resampler_ccf(rrate)
chan_filt_coeffs = gr.firdes.low_pass_2 (1, # gain
usrp_rate, # sampling rate
8e3, # passband cutoff
4e3, # transition bw
60) # stopband attenuation
if self.use_IF:
# Turn If to baseband and filter.
self.chan_filt = gr.freq_xlating_fir_filter_ccf (chanfilt_decim,
chan_filt_coeffs,
self.IF_freq,
usrp_rate)
else:
self.chan_filt = gr.fir_filter_ccf (chanfilt_decim, chan_filt_coeffs)
self.agc = gr.agc_cc(0.1, 1, 1, 100000)
self.am_demod = gr.complex_to_mag()
self.volume_control = gr.multiply_const_ff(self.vol)
audio_filt_coeffs = gr.firdes.low_pass_2 (1, # gain
demod_rate, # sampling rate
8e3, # passband cutoff
2e3, # transition bw
60) # stopband attenuation
self.audio_filt=gr.fir_filter_fff(audio_decim, audio_filt_coeffs)
# sound card as final sink
self.audio_sink = audio.sink (int (audio_rate),
options.audio_output,
False) # ok_to_block
# now wire it all together
self.connect (self.u, self.resamp, self.chan_filt, self.agc,
self.am_demod, self.audio_filt,
self.volume_control, self.audio_sink)
self._build_gui(vbox, usrp_rate, demod_rate, audio_rate)
if options.gain is None:
g = self.u.get_gain_range()
# if no gain was specified, use the mid gain
options.gain = (g.start() + g.stop())/2.0
if options.volume is None:
v = self.volume_range()
options.volume = float(v[0]*3+v[1])/4.0
if abs(options.freq) < 1e3:
options.freq *= 1e3
# set initial values
self.set_gain(options.gain)
self.set_vol(options.volume)
if not(self.set_freq(options.freq)):
self._set_status_msg("Failed to set initial frequency")
def __init__(self, parent, ID, title):
wxFrame.__init__(self, parent, ID, title,
wxDefaultPosition)
self.pga = 0
self.pgaMin = -20
self.pgaMax = 0
self.pgaStep = 0.25
# Parsing options
parser = OptionParser(option_class=eng_option,
usage="usage: %prog [options] filename1" \
" [-f frequency2 filename2 [...]]")
parser.add_option("-a", "--agc", action="store_true",
help="enable agc")
parser.add_option("-c", "--clockrate", type="eng_float", default=128e6,
help="set USRP clock rate (128e6)")
parser.add_option("--copy", action="store_true",
help="enable real to imag data copy when in real mode")
parser.add_option("-e", "--encoding", type="choice", choices=["s", "f"],
default="f", help="choose data encoding: [s]igned or [f]loat.")
parser.add_option("-f", "--frequency", type="eng_float",
action="callback", callback=appendFrequency,
help="set output frequency (222.064e6)")
parser.add_option("-g", "--gain", type="float",
help="set output pga gain")
parser.add_option("-l", "--list", action="callback", callback=listUsrp,
help="list USRPs and daugtherboards")
parser.add_option("-m", "--mode", type="eng_float", default=2,
help="mode: 1: real, 2: complex (2)")
parser.add_option("-o", "--osc", action="store_true",
help="enable oscilloscope")
parser.add_option("-r", "--samplingrate", type="eng_float",
default=3.2e6,
help="set input sampling rate (3200000)")
parser.add_option("-s", "--spectrum", action="store_true",
help="enable spectrum analyzer")
# parser.add_option("-t", "--tx", type="choice", choices=["A", "B"],
# default="A", help="choose USRP tx A|B output (A)")
parser.add_option("-u", "--usrp", action="store_true",
help="enable USRP output")
(options, args) = parser.parse_args()
if len(args) == 0 :
options.filename = [ "/dev/stdin" ]
else :
options.filename = args
# Setting default frequency
if options.frequency is None :
options.frequency = [ 222.064e6 ]
if len(options.filename) != len(options.frequency) :
parser.error("Nb input file != nb frequency!")
# Status bar
# self.CreateStatusBar(3, 0)
# msg = "PGA: %.2f dB" % (self.pga * self.pgaStep)
# self.SetStatusText(msg, 1)
# msg = "Freq: %.3f mHz" % (options.frequency[0] / 1000000.0)
# self.SetStatusText(msg, 2)
# Menu bar
menu = wxMenu()
menu.Append(ID_ABOUT, "&About",
"More information about this program")
menu.AppendSeparator()
menu.Append(ID_EXIT, "E&xit", "Terminate the program")
menuBar = wxMenuBar()
menuBar.Append(menu, "&File")
self.SetMenuBar(menuBar)
# Main windows
mainSizer = wxFlexGridSizer(0, 1)
sliderSizer = wxFlexGridSizer(0, 2)
buttonSizer = wxBoxSizer(wxHORIZONTAL)
if options.usrp :
# TX d'board 0
gainLabel = wxStaticText(self, -1, "PGA 0")
gainSlider = wxSlider(self, ID_GAIN_SLIDER0, self.pga,
self.pgaMin / self.pgaStep, self.pgaMax / self.pgaStep,
style = wxSL_HORIZONTAL | wxSL_AUTOTICKS)
gainSlider.SetSize((400, -1))
sliderSizer.Add(gainLabel, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
sliderSizer.Add(gainSlider, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
freqLabel = wxStaticText(self, -1, "Frequency 0")
freqSlider = wxSlider(self, ID_FREQ_SLIDER0,
options.frequency[0] / 16000, 0, 20e3,
style = wxSL_HORIZONTAL | wxSL_AUTOTICKS)
freqSlider.SetSize((400, -1))
sliderSizer.Add(freqLabel, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
sliderSizer.Add(freqSlider, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
if len(options.frequency) > 1 :
# TX d'board 1
gainLabel = wxStaticText(self, -1, "PGA 1")
gainSlider = wxSlider(self, ID_GAIN_SLIDER1, self.pga,
self.pgaMin / self.pgaStep, self.pgaMax / self.pgaStep,
style = wxSL_HORIZONTAL | wxSL_AUTOTICKS)
gainSlider.SetSize((400, -1))
sliderSizer.Add(gainLabel, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
sliderSizer.Add(gainSlider, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
freqLabel = wxStaticText(self, -1, "Frequency 1")
freqSlider = wxSlider(self, ID_FREQ_SLIDER1,
options.frequency[1] / 16000, 0, 20e3,
style = wxSL_HORIZONTAL | wxSL_AUTOTICKS)
freqSlider.SetSize((400, -1))
sliderSizer.Add(freqLabel, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
sliderSizer.Add(freqSlider, 0,
wxALIGN_CENTER_VERTICAL | wxFIXED_MINSIZE, 0)
mainSizer.Add(sliderSizer, 1, wxEXPAND, 0)
start = wxButton(self, ID_START, "Start")
stop = wxButton(self, ID_STOP, "Stop")
buttonSizer.Add(start, 1, wxALIGN_CENTER, 0)
buttonSizer.Add(stop, 1, wxALIGN_CENTER, 0)
mainSizer.Add(buttonSizer, 1, wxEXPAND, 0)
# GnuRadio
self.fg = gr.flow_graph()
if options.mode == 1 :
print "Source: real"
if (options.encoding == "s") :
print "Source encoding: short"
src = gr.file_source(gr.sizeof_short, options.filename[0], 1)
if (options.copy) :
print "Imag: copy"
imag = src
else :
print "Imag: null"
imag = gr.null_source(gr.sizeof_short)
interleaver = gr.interleave(gr.sizeof_short)
self.fg.connect(src, (interleaver, 0))
self.fg.connect(imag, (interleaver, 1))
tail = interleaver
elif (options.encoding == "f") :
print "Source encoding: float"
src = gr.file_source(gr.sizeof_gr_complex,
options.filename[0], 1)
tail = src
elif (options.mode == 2) :
print "Source: complex"
if len(options.frequency) == 1 :
if (options.encoding == "s") :
print "Source encoding: short"
src = gr.file_source(gr.sizeof_short,
options.filename[0], 1)
elif (options.encoding == "f") :
print "Source encoding: float"
src = gr.file_source(gr.sizeof_gr_complex,
options.filename[0], 1)
else :
parser.error("Invalid encoding type for complex data!")
tail = src
elif (len(options.frequency) == 2) :
src0 = gr.file_source(gr.sizeof_gr_complex,
options.filename[0], 1)
src1 = gr.file_source(gr.sizeof_gr_complex,
options.filename[1], 1)
interleaver = gr.interleave(gr.sizeof_gr_complex)
self.fg.connect(src0, (interleaver, 0))
self.fg.connect(src1, (interleaver, 1))
tail = interleaver
else :
parser.error(
"Invalid number of source (> 2) with complex input!")
else :
parser.error("Invalid mode!")
# Interpolation
dac_freq = options.clockrate
interp = int(dac_freq / options.samplingrate)
if interp == 0 :
parser.error("Invalid sampling rate!")
if options.mode == 2 :
print "Input sampling rate: %s complex samples/s" % \
num_to_str(options.samplingrate)
else :
print "Input sampling rate: %s samples/s" % \
num_to_str(options.samplingrate)
print "Interpolation rate: int(%s / %s) = %sx" % \
(num_to_str(dac_freq), num_to_str(options.samplingrate), interp)
if interp > 512 :
factor = gcd(dac_freq / 512, options.samplingrate)
num = int((dac_freq / 512) / factor)
den = int(options.samplingrate / factor)
print "Resampling by %i / %i" % (num, den)
resampler = blks.rational_resampler_ccc(self.fg, num, den)
self.fg.connect(tail, resampler)
tail = resampler
interp = 512
options.samplingrate = dac_freq / 512
# AGC
if options.agc :
agc = gr.agc_cc()
self.fg.connect(tail, agc)
tail = agc
# USRP
if options.usrp :
nchan = len(options.frequency)
if len(options.frequency) == 1 :
if options.mode == 1 :
mux = 0x00000098
elif options.mode == 2 :
mux = 0x00000098
else :
parser.error("Unsupported mode for USRP mux!")
elif len(options.frequency) == 2 :
if options.mode == 1 :
mux = 0x0000ba98
elif options.mode == 2 :
mux = 0x0000ba98
else :
parser.error("Unsupported mode for USRP mux!")
else :
parser.error("Invalid number of frequency [0..2]!")
# if options.tx == "A" :
# mux = 0x00000098
# else :
# mux = 0x00009800
print "Nb channels: ", nchan
print "Mux: 0x%x" % mux
if options.encoding == 's' :
dst = usrp.sink_s(0, interp, nchan, mux)
elif options.encoding == 'f' :
dst = usrp.sink_c(0, interp, nchan, mux)
else :
parser.error("Unsupported data encoding for USRP!")
dst.set_verbose(1)
for i in range(len(options.frequency)) :
if options.gain is None :
print "Setting gain to %f" % dst.pga_max()
dst.set_pga(i << 1, dst.pga_max())
else :
print "Setting gain to %f" % options.gain
dst.set_pga(i << 1, options.gain)
tune = false
for dboard in dst.db:
if (dboard[0].dbid() != -1):
device = dboard[0]
print "Tuning TX d'board %s to %sHz" % \
(device.side_and_name(),
num_to_str(options.frequency[i]))
device.lo_offset = 38e6
(min, max, offset) = device.freq_range()
print " Frequency"
print " Min: %sHz" % num_to_str(min)
print " Max: %sHz" % num_to_str(max)
print " Offset: %sHz" % num_to_str(offset)
#device.set_gain(device.gain_range()[1])
device.set_enable(True)
tune = \
dst.tune(device._which, device,
options.frequency[i] * 128e6 / dac_freq)
if tune:
print " Baseband frequency: %sHz" % \
num_to_str(tune.baseband_freq)
print " DXC frequency: %sHz" % \
num_to_str(tune.dxc_freq)
print " Residual Freqency: %sHz" % \
num_to_str(tune.residual_freq)
print " Inverted: ", \
tune.inverted
mux = usrp.determine_tx_mux_value(dst,
(device._which, 0))
dst.set_mux(mux)
break
else:
print " Failed!"
if not tune:
print " Failed!"
raise SystemExit
# int nunderruns ()
print "USRP"
print " Rx halfband: ", dst.has_rx_halfband()
print " Tx halfband: ", dst.has_tx_halfband()
print " Nb DDC: ", dst.nddc()
print " Nb DUC: ", dst.nduc()
#dst._write_9862(0, 14, 224)
print " DAC frequency: %s samples/s" % num_to_str(dst.dac_freq())
print " Fpga decimation rate: %s -> %s samples/s" % \
(num_to_str(dst.interp_rate()),
num_to_str(dac_freq / dst.interp_rate()))
print " Nb channels:",
if hasattr(dst, "nchannels()") :
print dst.nchannels()
else:
print "N/A"
print " Mux:",
if hasattr(dst, "mux()") :
print "0x%x" % dst.mux()
else :
print "N/A"
print " FPGA master clock frequency:",
if hasattr(dst, "fpga_master_clock_freq()") :
print "%sHz" % num_to_str(dst.fpga_master_clock_freq())
else :
print "N/A"
print " Converter rate:",
if hasattr(dst, "converter_rate()") :
print "%s" % num_to_str(dst.converter_rate())
else :
print "N/A"
print " DAC rate:",
if hasattr(dst, "dac_rate()") :
print "%s sample/s" % num_to_str(dst.dac_rate())
else :
print "N/A"
print " Interp rate: %sx" % num_to_str(dst.interp_rate())
print " DUC frequency 0: %sHz" % num_to_str(dst.tx_freq(0))
print " DUC frequency 1: %sHz" % num_to_str(dst.tx_freq(1))
print " Programmable Gain Amplifier 0: %s dB" % \
num_to_str(dst.pga(0))
print " Programmable Gain Amplifier 1: %s dB" % \
num_to_str(dst.pga(2))
else :
dst = gr.null_sink(gr.sizeof_gr_complex)
# AGC
if options.agc :
agc = gr.agc_cc()
self.fg.connect(tail, agc)
tail = agc
self.fg.connect(tail, dst)
# oscilloscope
if options.osc :
oscPanel = wxPanel(self, -1)
if (options.encoding == "s") :
converter = gr.interleaved_short_to_complex()
self.fg.connect(tail, converter)
signal = converter
elif (options.encoding == "f") :
signal = tail
else :
parser.error("Unsupported data encoding for oscilloscope!")
#block = scope_sink_f(fg, parent, title=label, sample_rate=input_rate)
#return (block, block.win)
oscWin = scopesink.scope_sink_c(self.fg, oscPanel, "Signal",
options.samplingrate)
self.fg.connect(signal, oscWin)
mainSizer.Add(oscPanel, 1, wxEXPAND)
# spectrometer
if options.spectrum :
ymin = 0
ymax = 160
fftPanel = wxPanel(self, -1)
if (options.encoding == "s") :
converter = gr.interleaved_short_to_complex()
self.fg.connect(tail, converter)
signal = converter
elif (options.encoding == "f") :
signal = tail
else :
parser.error("Unsupported data encoding for oscilloscope!")
fftWin = fftsink.fft_sink_c(self.fg, fftPanel,
title="Spectrum",
fft_size=2048,
sample_rate=options.samplingrate,
y_per_div=(ymax - ymin) / 8,
ref_level=ymax,
fft_rate=50,
average=True
)
self.fg.connect(signal, fftWin)
mainSizer.Add(fftPanel, 1, wxEXPAND)
# Events
EVT_MENU(self, ID_ABOUT, self.OnAbout)
EVT_MENU(self, ID_EXIT, self.TimeToQuit)
EVT_SLIDER(self, ID_GAIN_SLIDER0, self.slideEvent)
EVT_SLIDER(self, ID_FREQ_SLIDER0, self.slideEvent)
EVT_SLIDER(self, ID_GAIN_SLIDER1, self.slideEvent)
EVT_SLIDER(self, ID_FREQ_SLIDER1, self.slideEvent)
EVT_BUTTON(self, ID_START, self.onClick)
EVT_BUTTON(self, ID_STOP, self.onClick)
#Layout sizers
self.SetSizer(mainSizer)
self.SetAutoLayout(1)
mainSizer.Fit(self)
self.fg.start()
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.config_filename = config_filename = 'usrp_rx_hrpt.cfg'
self._decim_config = ConfigParser.ConfigParser()
self._decim_config.read(config_filename)
try: decim = self._decim_config.getfloat('usrp', 'decim')
except: decim = 16
self.decim = decim
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.sps = sps = sample_rate/sym_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try: side = self._side_config.get('usrp', 'side')
except: side = 'A'
self.side = side
self._saved_sync_alpha_config = ConfigParser.ConfigParser()
self._saved_sync_alpha_config.read(config_filename)
try: saved_sync_alpha = self._saved_sync_alpha_config.getfloat('demod', 'sync_alpha')
except: saved_sync_alpha = 0.05
self.saved_sync_alpha = saved_sync_alpha
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat('demod', 'pll_alpha')
except: saved_pll_alpha = 0.05
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try: saved_gain = self._saved_gain_config.getfloat('usrp', 'gain')
except: saved_gain = 35
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try: saved_freq = self._saved_freq_config.getfloat('usrp', 'freq')
except: saved_freq = 1698e6
self.saved_freq = saved_freq
self.hs = hs = int(sps/2.0)
self.sync_alpha = sync_alpha = saved_sync_alpha
self.side_text = side_text = side
self.pll_alpha = pll_alpha = saved_pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try: output_filename = self._output_filename_config.get('output', 'filename')
except: output_filename = 'frames.dat'
self.output_filename = output_filename
self.mf_taps = mf_taps = [-0.5/hs,]*hs+[0.5/hs,]*hs
self.max_sync_offset = max_sync_offset = 0.01
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.decim_text = decim_text = decim
##################################################
# Controls
##################################################
_sync_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._sync_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_sync_alpha_sizer,
value=self.sync_alpha,
callback=self.set_sync_alpha,
label="SYNC Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._sync_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_sync_alpha_sizer,
value=self.sync_alpha,
callback=self.set_sync_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_sync_alpha_sizer, 0, 3, 1, 1)
self._side_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.side_text,
callback=self.set_side_text,
label="USRP Side",
converter=forms.str_converter(),
)
self.GridAdd(self._side_text_static_text, 1, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 0, 2, 1, 1)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="RX Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 0, 1, 1, 1)
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_text_box, 0, 0, 1, 1)
self._decim_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.decim_text,
callback=self.set_decim_text,
label="Decimation",
converter=forms.float_converter(),
)
self.GridAdd(self._decim_text_static_text, 1, 1, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder()
self.deframer = noaa.hrpt_deframer()
self.frame_sink = gr.file_sink(gr.sizeof_short*1, output_filename)
self.gr_fir_filter_xxx_0 = gr.fir_filter_ccc(1, (mf_taps))
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.pll_scope = scopesink2.scope_sink_f(
self.GetWin(),
title="Demod Waveform",
sample_rate=sample_rate,
v_scale=0.5,
t_scale=20.0/sample_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.GridAdd(self.pll_scope.win, 2, 0, 1, 4)
self.sync = noaa.hrpt_sync_fb(sync_alpha, sync_alpha**2/4.0, sps, max_sync_offset)
self.usrp_source = grc_usrp.simple_source_c(which=0, side=side, rx_ant="RXA")
self.usrp_source.set_decim_rate(decim)
self.usrp_source.set_frequency(freq, verbose=True)
self.usrp_source.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.gr_fir_filter_xxx_0, 0), (self.pll, 0))
self.connect((self.agc, 0), (self.gr_fir_filter_xxx_0, 0))
self.connect((self.usrp_source, 0), (self.agc, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.pll, 0), (self.pll_scope, 0))
self.connect((self.pll, 0), (self.sync, 0))
self.connect((self.sync, 0), (self.deframer, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
def __init__(self):
gr.top_block.__init__(self, "USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.sample_rate = sample_rate = 4e6
self.sps = sps = sample_rate / sym_rate
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/config.conf'
self._pll_alpha_config = ConfigParser.ConfigParser()
self._pll_alpha_config.read(config_filename)
try:
pll_alpha = self._pll_alpha_config.getfloat(
'usrp_rx_hrpt', 'pll_alpha')
except:
pll_alpha = 0.01
self.pll_alpha = pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try:
output_filename = self._output_filename_config.get(
'usrp_rx_hrpt', 'filename')
except:
output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / sample_rate
self.hs = hs = int(sps / 2.0)
self._gain_config = ConfigParser.ConfigParser()
self._gain_config.read(config_filename)
try:
gain = self._gain_config.getfloat('usrp_rx_hrpt', 'gain')
except:
gain = 35
self.gain = gain
self._freq_config = ConfigParser.ConfigParser()
self._freq_config.read(config_filename)
try:
freq = self._freq_config.getfloat('usrp_rx_hrpt', 'freq')
except:
freq = 1698e6
self.freq = freq
self._clock_alpha_config = ConfigParser.ConfigParser()
self._clock_alpha_config.read(config_filename)
try:
clock_alpha = self._clock_alpha_config.getfloat(
'usrp_rx_hrpt', 'clock_alpha')
except:
clock_alpha = 0.01
self.clock_alpha = clock_alpha
self._addr_config = ConfigParser.ConfigParser()
self._addr_config.read(config_filename)
try:
addr = self._addr_config.get('usrp_rx_hrpt', 'addr')
except:
addr = ""
self.addr = addr
##################################################
# Blocks
##################################################
self.uhd_usrp_source_0 = uhd.usrp_source(
device_addr=addr,
io_type=uhd.io_type.COMPLEX_FLOAT32,
num_channels=1,
)
self.uhd_usrp_source_0.set_samp_rate(sample_rate)
self.uhd_usrp_source_0.set_center_freq(freq, 0)
self.uhd_usrp_source_0.set_gain(0, 0)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.frame_sink = gr.file_sink(gr.sizeof_short * 1, output_filename)
self.frame_sink.set_unbuffered(False)
self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
self.deframer = noaa.hrpt_deframer()
self.decoder = noaa.hrpt_decoder(True, True)
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
##################################################
# Connections
##################################################
self.connect((self.gr_moving_average_xx_0, 0),
(self.digital_clock_recovery_mm_xx_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.uhd_usrp_source_0, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.digital_binary_slicer_fb_0, 0), (self.deframer, 0))
self.connect((self.digital_clock_recovery_mm_xx_0, 0),
(self.digital_binary_slicer_fb_0, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
def test_001(self):
''' Test the complex AGC loop (single rate input) '''
tb = self.tb
expected_result = (
(100.000244140625 + 7.2191943445432116e-07j),
(72.892257690429688 + 52.959323883056641j), (25.089065551757812 +
77.216217041015625j),
(-22.611061096191406 + 69.589706420898438j), (-53.357715606689453 +
38.766635894775391j),
(-59.458671569824219 + 3.4792964243024471e-07j),
(-43.373462677001953 - 31.512666702270508j), (-14.94139289855957 -
45.984889984130859j),
(13.478158950805664 - 41.48150634765625j), (31.838506698608398 -
23.132022857666016j),
(35.519271850585938 - 3.1176801940091536e-07j),
(25.942903518676758 + 18.848621368408203j), (8.9492912292480469 +
27.5430908203125j),
(-8.0852642059326172 + 24.883890151977539j), (-19.131628036499023 +
13.899936676025391j),
(-21.383295059204102 + 3.1281737733479531e-07j),
(-15.650330543518066 - 11.370632171630859j), (-5.4110145568847656 -
16.65339469909668j),
(4.9008159637451172 - 15.083160400390625j), (11.628337860107422 -
8.4484796524047852j),
(13.036135673522949 - 2.288476110834381e-07j),
(9.5726661682128906 + 6.954948902130127j), (3.3216962814331055 +
10.223132133483887j),
(-3.0204284191131592 + 9.2959251403808594j), (-7.1977195739746094 +
5.2294478416442871j),
(-8.1072216033935547 + 1.8976157889483147e-07j),
(-5.9838657379150391 - 4.3475332260131836j), (-2.0879747867584229 -
6.4261269569396973j),
(1.9100792407989502 - 5.8786196708679199j), (4.5814824104309082 -
3.3286411762237549j),
(5.1967458724975586 - 1.3684227440080576e-07j),
(3.8647139072418213 + 2.8078789710998535j), (1.3594740629196167 +
4.1840314865112305j),
(-1.2544282674789429 + 3.8607344627380371j), (-3.0366206169128418 +
2.2062335014343262j),
(-3.4781389236450195 + 1.1194014604143376e-07j),
(-2.6133756637573242 - 1.8987287282943726j), (-0.9293016791343689 -
2.8600969314575195j),
(0.86727333068847656 - 2.6691930294036865j), (2.1243946552276611 -
1.5434627532958984j),
(2.4633183479309082 - 8.6486437567145913e-08j),
(1.8744727373123169 + 1.3618841171264648j), (0.67528903484344482 +
2.0783262252807617j),
(-0.63866174221038818 + 1.965599536895752j), (-1.5857341289520264 +
1.152103066444397j),
(-1.8640764951705933 +
7.6355092915036948e-08j), (-1.4381576776504517 -
1.0448826551437378j),
(-0.52529704570770264 -
1.6166983842849731j), (0.50366902351379395 - 1.5501341819763184j),
(1.26766037940979 - 0.92100900411605835j))
sampling_freq = 100
src1 = gr.sig_source_c(sampling_freq, gr.GR_SIN_WAVE,
sampling_freq * 0.10, 100.0)
dst1 = gr.vector_sink_c()
head = gr.head(gr.sizeof_gr_complex, int(5 * sampling_freq * 0.10))
agc = gr.agc_cc(1e-3, 1, 1, 1000)
tb.connect(src1, head)
tb.connect(head, agc)
tb.connect(agc, dst1)
if test_output == True:
tb.connect(agc,
gr.file_sink(gr.sizeof_gr_complex, "test_agc_cc.dat"))
tb.run()
dst_data = dst1.data()
self.assertComplexTuplesAlmostEqual(expected_result, dst_data, 4)
def __init__(self,
decim=32,
freq=1698e6,
gain=35,
side="A",
frames_file=os.environ['HOME'] + '/NOAA-XX.hrpt',
baseband_file=os.environ['HOME'] + '/NOAA-XX.dat',
satellite='NOAA-XX',
sync_check=False):
gr.top_block.__init__(self, "USRP NOAA HRPT Receiver")
##################################################
# Parameters
##################################################
self.decim = decim
self.freq = freq
self.gain = gain
self.side = side
self.frames_file = frames_file
self.baseband_file = baseband_file
self.satellite = satellite
self.sync_check = sync_check
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.samp_rate = samp_rate = 64e6 / decim
self.sps = sps = samp_rate / sym_rate
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/noaa_hrpt.conf'
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat(
"satname", 'pll_alpha')
except:
saved_pll_alpha = 0.005
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try:
saved_gain = self._saved_gain_config.getfloat("satname", 'gain')
except:
saved_gain = gain
self.saved_gain = saved_gain
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try:
saved_clock_alpha = self._saved_clock_alpha_config.getfloat(
"satname", 'clock_alpha')
except:
saved_clock_alpha = 0.001
self.saved_clock_alpha = saved_clock_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / samp_rate
self.hs = hs = int(sps / 2.0)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-5, 1.0, 1.0 / 32768.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, saved_clock_alpha**2 / 4.0, 0.5, saved_clock_alpha,
max_clock_offset)
self.gr_file_sink_0 = gr.file_sink(gr.sizeof_short * 1, baseband_file)
self.gr_file_sink_0.set_unbuffered(False)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short * 1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex(
)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True, False)
self.pll = noaa.hrpt_pll_cf(saved_pll_alpha, saved_pll_alpha**2 / 4.0,
max_carrier_offset)
self.poesweather_noaa_hrpt_deframer_0 = poesweather.noaa_hrpt_deframer(
sync_check)
self.usrp_simple_source_x_0 = grc_usrp.simple_source_s(which=0,
side=side,
rx_ant="RXA")
self.usrp_simple_source_x_0.set_decim_rate(decim)
self.usrp_simple_source_x_0.set_frequency(freq, verbose=True)
self.usrp_simple_source_x_0.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0),
(self.gr_file_sink_0_0, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0),
(self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0),
(self.poesweather_noaa_hrpt_deframer_0, 0))
self.connect((self.usrp_simple_source_x_0, 0),
(self.gr_file_sink_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.agc, 0))
self.connect((self.usrp_simple_source_x_0, 0),
(self.gr_interleaved_short_to_complex_0, 0))
def __init__(
self,
satellite='NOAAxx',
decim=50,
baseband_file="/home/martin/GNURadioData/hrpt/baseband/HRPT_NOAA19_2010-09-10_12-35-34_UTC_U2_d50.sam",
frames_file=os.environ['HOME'] + '/noaa_hrpt_frames.hmf',
deframer_outsync_frames=5,
deframer_insync_frames=2,
clock_alpha=0.005,
gain_mu=0.005,
pll_alpha=0.005,
pll_beta=0.00001,
deframer_sync_check=True,
symb_rate=600 * 1109):
grc_wxgui.top_block_gui.__init__(
self, title="NOAA HRPT Receiver from baseband file")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.satellite = satellite
self.decim = decim
self.baseband_file = baseband_file
self.frames_file = frames_file
self.deframer_outsync_frames = deframer_outsync_frames
self.deframer_insync_frames = deframer_insync_frames
self.clock_alpha = clock_alpha
self.gain_mu = gain_mu
self.pll_alpha = pll_alpha
self.pll_beta = pll_beta
self.deframer_sync_check = deframer_sync_check
self.symb_rate = symb_rate
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6 / decim_tb
self.sps = sps = samp_rate / symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_beta_sl = pll_beta_sl = pll_beta
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / samp_rate
self.hs = hs = int(sps / 2.0)
self.gain_mu_sl = gain_mu_sl = gain_mu
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S",
localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Input baseband")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb),
"PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0,
1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1,
1)
_pll_beta_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_beta_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_beta_sl_sizer,
value=self.pll_beta_sl,
callback=self.set_pll_beta_sl,
label="PLL Beta",
converter=forms.float_converter(),
proportion=0,
)
self._pll_beta_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_beta_sl_sizer,
value=self.pll_beta_sl,
callback=self.set_pll_beta_sl,
minimum=0.000001,
maximum=0.001,
num_steps=1000,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_beta_sl_sizer, 2, 0, 1, 1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
_gain_mu_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_mu_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_gain_mu_sl_sizer,
value=self.gain_mu_sl,
callback=self.set_gain_mu_sl,
label="Gain MU",
converter=forms.float_converter(),
proportion=0,
)
self._gain_mu_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_gain_mu_sl_sizer,
value=self.gain_mu_sl,
callback=self.set_gain_mu_sl,
minimum=0.0001,
maximum=0.01,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_gain_mu_sl_sizer, 1, 2, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._frames_file_text_inf_static_text,
3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._datetime_text_static_text, 1, 0,
1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.cs2cf = gr.interleaved_short_to_complex()
self.gr_agc_xx_0_0 = gr.agc_cc(10e-6, 1, 1.0 / 32767.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, gain_mu_sl, max_clock_offset)
self.gr_complex_to_real_0 = gr.complex_to_real(1)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(pll_alpha_sl, pll_beta_sl,
0.07, -0.07, 2)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short * 1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short * 1,
baseband_file, False)
self.gr_moving_average_xx_0 = gr.moving_average_cc(hs, 1.0 / hs, 4000)
self.gr_throttle_0 = gr.throttle(gr.sizeof_short * 1, samp_rate * 2)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True, False)
self.poesweather_univ_hrpt_deframer_0 = poesweather.univ_hrpt_deframer(
deframer_sync_check, 11090, deframer_insync_frames,
deframer_outsync_frames)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=50,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="PSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1 / samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
trig_mode=gr.gr_TRIG_MODE_AUTO,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
self.connect((self.gr_throttle_0, 0), (self.cs2cf, 0))
self.connect((self.cs2cf, 0), (self.gr_agc_xx_0_0, 0))
self.connect((self.cs2cf, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_complex_to_real_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0),
(self.gr_file_sink_0_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0),
(self.poesweather_univ_hrpt_deframer_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0),
(self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_agc_xx_0_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0),
(self.gr_moving_average_xx_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_complex_to_real_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.wxgui_scopesink2_1, 0))
def __init__(self, decim=50, satellite='Meteor-M-N1', frames_file=os.environ['HOME'] + '/MN1_hrpt_frames.hmf', baseband_file="/home/martin/GNURadioData/hrpt/baseband/HRPT_Meteor-M-N1_2011-02-27_09-30-46_UTC_U2_d50.sam", symb_rate=600*1109, clock_alpha=0.050, pll_alpha=0.05, deframer_outsync_frames=100, deframer_insync_frames=3, deframer_sync_check=False):
grc_wxgui.top_block_gui.__init__(self, title="Meteor M-N1 HRPT Receiver from baseband file")
_icon_path = "/home/martin/.local/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.decim = decim
self.satellite = satellite
self.frames_file = frames_file
self.baseband_file = baseband_file
self.symb_rate = symb_rate
self.clock_alpha = clock_alpha
self.pll_alpha = pll_alpha
self.deframer_outsync_frames = deframer_outsync_frames
self.deframer_insync_frames = deframer_insync_frames
self.deframer_sync_check = deframer_sync_check
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6/decim_tb
self.sps = sps = samp_rate/symb_rate_tb
self.v = v = True
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.hs = hs = int(sps/2.0)
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Blocks
##################################################
self.rx_ntb = self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Input baseband")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
self.GetWin(),
title="Scope Plot",
sample_rate=samp_rate,
v_scale=0,
v_offset=0,
t_scale=0,
ac_couple=False,
xy_mode=False,
num_inputs=1,
trig_mode=gr.gr_TRIG_MODE_AUTO,
y_axis_label="Counts",
)
self.Add(self.wxgui_scopesink2_0.win)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=50,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self._v_check_box = forms.check_box(
parent=self.GetWin(),
value=self.v,
callback=self.set_v,
label="Open",
true=True,
false=False,
)
self.Add(self._v_check_box)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
self.poesweather_meteor_cadu_deframer_0 = poesweather.meteor_cadu_deframer(deframer_sync_check, 256, deframer_insync_frames, deframer_outsync_frames)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.gr_throttle_0 = gr.throttle(gr.sizeof_short*1, samp_rate*10)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vff((-1, ))
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.gr_file_source_0_0 = gr.file_source(gr.sizeof_short*1, "/home/martin/hrpt/baseband/METEOR-M-1/2011/07/24/METEOR-M-1_2011-07-24T113448_U2d50.sam", False)
self.gr_file_sink_0_0_0 = gr.file_sink(gr.sizeof_char*1, "frames.mn1")
self.gr_file_sink_0_0_0.set_unbuffered(False)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_agc_xx_0_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
self.cs2cf = gr.interleaved_short_to_complex()
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Connections
##################################################
self.connect((self.gr_throttle_0, 0), (self.cs2cf, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.cs2cf, 0), (self.gr_agc_xx_0_0, 0))
self.connect((self.gr_agc_xx_0_0, 0), (self.pll, 0))
self.connect((self.cs2cf, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_multiply_const_vxx_0, 0))
self.connect((self.poesweather_meteor_cadu_deframer_0, 0), (self.gr_file_sink_0_0_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_meteor_cadu_deframer_0, 0))
self.connect((self.gr_file_source_0_0, 0), (self.gr_throttle_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.wxgui_scopesink2_0, 0))
def test_001(self):
''' Test the complex AGC loop (single rate input) '''
fg = self.fg
expected_result = (
(100.000244140625+7.2191943445432116e-07j),
(72.892257690429688+52.959323883056641j),
(25.089065551757812+77.216217041015625j),
(-22.611061096191406+69.589706420898438j),
(-53.357715606689453+38.766635894775391j),
(-59.458671569824219+3.4792964243024471e-07j),
(-43.373462677001953-31.512666702270508j),
(-14.94139289855957-45.984889984130859j),
(13.478158950805664-41.48150634765625j),
(31.838506698608398-23.132022857666016j),
(35.519271850585938-3.1176801940091536e-07j),
(25.942903518676758+18.848621368408203j),
(8.9492912292480469+27.5430908203125j),
(-8.0852642059326172+24.883890151977539j),
(-19.131628036499023+13.899936676025391j),
(-21.383295059204102+3.1281737733479531e-07j),
(-15.650330543518066-11.370632171630859j),
(-5.4110145568847656-16.65339469909668j),
(4.9008159637451172-15.083160400390625j),
(11.628337860107422-8.4484796524047852j),
(13.036135673522949-2.288476110834381e-07j),
(9.5726661682128906+6.954948902130127j),
(3.3216962814331055+10.223132133483887j),
(-3.0204284191131592+9.2959251403808594j),
(-7.1977195739746094+5.2294478416442871j),
(-8.1072216033935547+1.8976157889483147e-07j),
(-5.9838657379150391-4.3475332260131836j),
(-2.0879747867584229-6.4261269569396973j),
(1.9100792407989502-5.8786196708679199j),
(4.5814824104309082-3.3286411762237549j),
(5.1967458724975586-1.3684227440080576e-07j),
(3.8647139072418213+2.8078789710998535j),
(1.3594740629196167+4.1840314865112305j),
(-1.2544282674789429+3.8607344627380371j),
(-3.0366206169128418+2.2062335014343262j),
(-3.4781389236450195+1.1194014604143376e-07j),
(-2.6133756637573242-1.8987287282943726j),
(-0.9293016791343689-2.8600969314575195j),
(0.86727333068847656-2.6691930294036865j),
(2.1243946552276611-1.5434627532958984j),
(2.4633183479309082-8.6486437567145913e-08j),
(1.8744727373123169+1.3618841171264648j),
(0.67528903484344482+2.0783262252807617j),
(-0.63866174221038818+1.965599536895752j),
(-1.5857341289520264+1.152103066444397j),
(-1.8640764951705933+7.6355092915036948e-08j),
(-1.4381576776504517-1.0448826551437378j),
(-0.52529704570770264-1.6166983842849731j),
(0.50366902351379395-1.5501341819763184j),
(1.26766037940979-0.92100900411605835j))
sampling_freq = 100
src1 = gr.sig_source_c (sampling_freq, gr.GR_SIN_WAVE,
sampling_freq * 0.10, 100.0)
dst1 = gr.vector_sink_c ()
head = gr.head (gr.sizeof_gr_complex, int (5*sampling_freq * 0.10))
agc = gr.agc_cc(1e-3, 1, 1, 1000)
fg.connect (src1, head)
fg.connect (head, agc)
fg.connect (agc, dst1)
if test_output == True:
fg.connect (agc, gr.file_sink(gr.sizeof_gr_complex, "test_agc_cc.dat"))
fg.run ()
dst_data = dst1.data ()
self.assertComplexTuplesAlmostEqual (expected_result, dst_data, 4)
def __init__(self,frame,panel,vbox,argv):
stdgui2.std_top_block.__init__ (self,frame,panel,vbox,argv)
usage="%prog: [options] [input_filename]. \n If you don't specify an input filename the usrp will be used as source\n " \
"Make sure your input capture file containes interleaved shorts not complex floats"
parser=OptionParser(option_class=eng_option, usage=usage)
parser.add_option("-a", "--args", type="string", default="",
help="UHD device address args [default=%default]")
parser.add_option("", "--spec", type="string", default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A", "--antenna", type="string", default=None,
help="select Rx Antenna where appropriate")
parser.add_option("-s", "--samp-rate", type="eng_float", default=1e6,
help="set sample rate")
parser.add_option("-f", "--freq", type="eng_float", default=519.25e6,
help="set frequency to FREQ", metavar="FREQ")
parser.add_option("-g", "--gain", type="eng_float", default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-c", "--contrast", type="eng_float", default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b", "--brightness", type="eng_float", default=0.0,
help="set brightness (default is 0)")
parser.add_option("-p", "--pal", action="store_true", default=False,
help="PAL video format (this is the default)")
parser.add_option("-n", "--ntsc", action="store_true", default=False,
help="NTSC video format")
parser.add_option("-o", "--out-filename", type="string", default="sdl",
help="For example out_raw_uchar.gray. If you don't specify an output filename you will get a video_sink_sdl realtime output window. You then need to have gr-video-sdl installed)")
parser.add_option("-r", "--repeat", action="store_false", default=True,
help="repeat file in a loop")
parser.add_option("", "--freq-min", type="eng_float", default=50.25e6,
help="Set a minimum frequency [default=%default]")
parser.add_option("", "--freq-max", type="eng_float", default=900.25e6,
help="Set a maximum frequency [default=%default]")
(options, args) = parser.parse_args()
if not ((len(args) == 1) or (len(args) == 0)):
parser.print_help()
sys.exit(1)
if len(args) == 1:
filename = args[0]
else:
filename = None
self.frame = frame
self.panel = panel
self.contrast = options.contrast
self.brightness = options.brightness
self.state = "FREQ"
self.freq = 0
self.tv_freq_min = options.freq_min
self.tv_freq_max = options.freq_max
# build graph
self.u=None
if not (options.out_filename=="sdl"):
options.repeat=False
usrp_rate = options.samp_rate
if not ((filename is None) or (filename=="usrp")):
# file is data source
self.filesource = gr.file_source(gr.sizeof_short,filename,options.repeat)
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource,self.istoc)
self.src=self.istoc
options.gain=0.0
self.gain=0.0
else: # use a UHD device
self.u = uhd.usrp_source(device_addr=options.args, stream_args=uhd.stream_args('fc32'))
# Set the subdevice spec
if(options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if(options.antenna):
self.u.set_antenna(options.antenna, 0)
self.u.set_samp_rate(usrp_rate)
dev_rate = self.u.get_samp_rate()
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.u.get_gain_range()
options.gain = float(g.start()+g.stop())/2.0
self.src=self.u
self.gain = options.gain
f2uc=gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal=True #set default to PAL
if options.pal:
lines_per_frame=625.0
frames_per_sec=25.0
show_width=768
elif options.ntsc:
lines_per_frame=525.0
frames_per_sec=29.97002997
show_width=640
width=int(usrp_rate/(lines_per_frame*frames_per_sec))
height=int(lines_per_frame)
if (options.out_filename=="sdl"):
#Here comes the tv screen, you have to build and install
#gr-video-sdl for this (subproject of gnuradio, only in cvs
#for now)
try:
video_sink = video_sdl.sink_uc ( frames_per_sec, width, height, 0,
show_width, height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst=video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " +str(width)+ "x" + str(height) \
+ " gray:" + options.out_filename
print "(Use the spacebar to advance to next frames)"
options.repeat=False
file_sink=gr.file_sink(gr.sizeof_char, options.out_filename)
self.dst =file_sink
self.agc=gr.agc_cc(1e-7,1.0,1.0) #1e-7
self.am_demod = gr.complex_to_mag ()
self.set_blacklevel=gr.add_const_ff(0.0)
self.invert_and_scale = gr.multiply_const_ff (0.0) #-self.contrast *128.0*255.0/(200.0)
# now wire it all together
#sample_rate=options.width*options.height*options.framerate
process_type='do_no_sync'
if process_type=='do_no_sync':
self.connect (self.src, self.agc,self.am_demod,
self.invert_and_scale, self.set_blacklevel,
f2uc,self.dst)
elif process_type=='do_tv_sync_adv':
#defaults: gr.tv_sync_adv (double sampling_freq, unsigned
#int tv_format,bool output_active_video_only=false, bool
#do_invert=false, double wanted_black_level=0.0, double
#wanted_white_level=255.0, double avg_alpha=0.1, double
#initial_gain=1.0, double initial_offset=0.0,bool
#debug=false)
#note, this block is not yet in cvs
self.tv_sync_adv=gr.tv_sync_adv(usrp_rate, 0, False, False,
0.0, 255.0, 0.01, 1.0, 0.0, False)
self.connect (self.src, self.am_demod, self.invert_and_scale,
self.tv_sync_adv, s2f, f2uc, self.dst)
elif process_type=='do_nullsink':
#self.connect (self.src, self.am_demod,self.invert_and_scale,f2uc,video_sink)
c2r=gr.complex_to_real()
nullsink=gr.null_sink(gr.sizeof_float)
self.connect (self.src, c2r,nullsink) #video_sink)
elif process_type=='do_tv_sync_corr':
frame_size=width*height #int(usrp_rate/25.0)
nframes=10# 32
search_window=20*nframes
debug=False
video_alpha=0.3 #0.1
corr_alpha=0.3
#Note: this block is not yet in cvs
tv_corr=gr.tv_correlator_ff(frame_size,nframes, search_window,
video_alpha, corr_alpha,debug)
shift=gr.add_const_ff(-0.7)
self.connect (self.src, self.agc, self.am_demod, tv_corr,
self.invert_and_scale, self.set_blacklevel,
f2uc, self.dst)
else: # process_type=='do_test_image':
src_vertical_bars = gr.sig_source_f (usrp_rate, gr.GR_SIN_WAVE,
10.0 *usrp_rate/320, 255,128)
self.connect(src_vertical_bars, f2uc, self.dst)
self._build_gui(vbox, usrp_rate, usrp_rate, usrp_rate)
frange = self.u.get_freq_range()
if(frange.start() > self.tv_freq_max or frange.stop() < self.tv_freq_min):
sys.stderr.write("Radio does not support required frequency range.\n")
sys.exit(1)
if(options.freq < self.tv_freq_min or options.freq > self.tv_freq_max):
sys.stderr.write("Requested frequency is outside of required frequency range.\n")
sys.exit(1)
# set initial values
self.set_gain(options.gain)
self.set_contrast(self.contrast)
self.set_brightness(options.brightness)
if not(self.set_freq(options.freq)):
self._set_status_msg("Failed to set initial frequency")
def __init__(self, frame, panel, vbox, argv):
stdgui2.std_top_block.__init__(self, frame, panel, vbox, argv)
parser = OptionParser(option_class=eng_option)
parser.add_option("-a",
"--args",
type="string",
default="",
help="UHD device address args [default=%default]")
parser.add_option("",
"--spec",
type="string",
default=None,
help="Subdevice of UHD device where appropriate")
parser.add_option("-A",
"--antenna",
type="string",
default=None,
help="select Rx Antenna where appropriate")
parser.add_option(
"-s",
"--samp-rate",
type="eng_float",
default=1e6,
help="set sample rate (bandwidth) [default=%default]")
parser.add_option("-f",
"--freq",
type="eng_float",
default=1008.0e3,
help="set frequency to FREQ",
metavar="FREQ")
parser.add_option(
"-I",
"--use-if-freq",
action="store_true",
default=False,
help=
"use intermediate freq (compensates DC problems in quadrature boards)"
)
parser.add_option("-g",
"--gain",
type="eng_float",
default=None,
help="set gain in dB (default is maximum)")
parser.add_option("-V",
"--volume",
type="eng_float",
default=None,
help="set volume (default is midpoint)")
parser.add_option(
"-O",
"--audio-output",
type="string",
default="",
help="pcm device name. E.g., hw:0,0 or surround51 or /dev/dsp")
(options, args) = parser.parse_args()
if len(args) != 0:
parser.print_help()
sys.exit(1)
self.frame = frame
self.panel = panel
self.use_IF = options.use_if_freq
if self.use_IF:
self.IF_freq = 64000.0
else:
self.IF_freq = 0.0
self.vol = 0
self.state = "FREQ"
self.freq = 0
# build graph
self.u = uhd.usrp_source(device_addr=options.args,
stream_args=uhd.stream_args('fc32'))
usrp_rate = 256e3
demod_rate = 64e3
audio_rate = 32e3
chanfilt_decim = int(usrp_rate // demod_rate)
audio_decim = int(demod_rate // audio_rate)
self.u.set_samp_rate(usrp_rate)
dev_rate = self.u.get_samp_rate()
# Resample signal to exactly self.usrp_rate
# FIXME: make one of the follow-on filters an arb resampler
rrate = usrp_rate / dev_rate
self.resamp = blks2.pfb_arb_resampler_ccf(rrate)
chan_filt_coeffs = gr.firdes.low_pass_2(
1, # gain
usrp_rate, # sampling rate
8e3, # passband cutoff
4e3, # transition bw
60) # stopband attenuation
if self.use_IF:
# Turn If to baseband and filter.
self.chan_filt = gr.freq_xlating_fir_filter_ccf(
chanfilt_decim, chan_filt_coeffs, self.IF_freq, usrp_rate)
else:
self.chan_filt = gr.fir_filter_ccf(chanfilt_decim,
chan_filt_coeffs)
self.agc = gr.agc_cc(0.1, 1, 1, 100000)
self.am_demod = gr.complex_to_mag()
self.volume_control = gr.multiply_const_ff(self.vol)
audio_filt_coeffs = gr.firdes.low_pass_2(
1, # gain
demod_rate, # sampling rate
8e3, # passband cutoff
2e3, # transition bw
60) # stopband attenuation
self.audio_filt = gr.fir_filter_fff(audio_decim, audio_filt_coeffs)
# sound card as final sink
self.audio_sink = audio.sink(int(audio_rate), options.audio_output,
False) # ok_to_block
# now wire it all together
self.connect(self.u, self.resamp, self.chan_filt, self.agc,
self.am_demod, self.audio_filt, self.volume_control,
self.audio_sink)
self._build_gui(vbox, usrp_rate, demod_rate, audio_rate)
if options.gain is None:
g = self.u.get_gain_range()
if True:
# if no gain was specified, use the mid gain
options.gain = (g.start() + g.stop()) / 2.0
options.gain = g.stop()
if options.volume is None:
v = self.volume_range()
options.volume = float(v[0] * 3 + v[1]) / 4.0
if abs(options.freq) < 1e3:
options.freq *= 1e3
# set initial values
self.set_gain(options.gain)
self.set_vol(options.volume)
if not (self.set_freq(options.freq)):
self._set_status_msg("Failed to set initial frequency")
# Set the subdevice spec
if (options.spec):
self.u.set_subdev_spec(options.spec, 0)
# Set the antenna
if (options.antenna):
self.u.set_antenna(options.antenna, 0)
def __init__(self, side="A", gain=35, decim=32, sync_check=False, satellite='METEOR-M-1', frames_file=os.environ['HOME'] + '/METEOR-M-1.hrpt', freq=1700e6):
grc_wxgui.top_block_gui.__init__(self, title="USRP NOAA HRPT Receiver")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.side = side
self.gain = gain
self.decim = decim
self.sync_check = sync_check
self.satellite = satellite
self.frames_file = frames_file
self.freq = freq
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.samp_rate = samp_rate = 64e6/decim
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/mn1_hrpt.conf'
self.sps = sps = samp_rate/sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat("satname", 'pll_alpha')
except: saved_pll_alpha = 0.005
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat("satname", 'clock_alpha')
except: saved_clock_alpha = 0.001
self.saved_clock_alpha = saved_clock_alpha
self.sync_check_txt = sync_check_txt = sync_check
self.side_text = side_text = side
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try: saved_gain = self._saved_gain_config.getfloat("satname", 'gain')
except: saved_gain = gain
self.saved_gain = saved_gain
self.satellite_text = satellite_text = satellite
self.sample_rate_text = sample_rate_text = samp_rate
self.pll_alpha = pll_alpha = saved_pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.hs = hs = int(sps/2.0)
self.gain_slider = gain_slider = gain
self.freq_tb = freq_tb = freq
self.frames_outfile_text = frames_outfile_text = frames_file
self.decim_tb = decim_tb = decim
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha = clock_alpha = saved_clock_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "RX Meteor M N1 HRPT")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Information")
self.Add(self.displays)
##################################################
# Controls
##################################################
self._sync_check_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.sync_check_txt,
callback=self.set_sync_check_txt,
label="Sync check",
converter=forms.float_converter(),
)
self.GridAdd(self._sync_check_txt_static_text, 0, 2, 1, 1)
self._side_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.side_text,
callback=self.set_side_text,
label="USRP Side",
converter=forms.str_converter(),
)
self.GridAdd(self._side_text_static_text, 0, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Satellite",
converter=forms.str_converter(),
)
self.GridAdd(self._satellite_text_static_text, 0, 1, 1, 1)
self._sample_rate_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.sample_rate_text,
callback=self.set_sample_rate_text,
label="Sample rate",
converter=forms.float_converter(),
)
self.displays.GetPage(1).GridAdd(self._sample_rate_text_static_text, 3, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.005,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 2, 1, 1, 1)
_gain_slider_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_slider_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_slider_sizer,
value=self.gain_slider,
callback=self.set_gain_slider,
label="Gain",
converter=forms.int_converter(),
proportion=0,
)
self._gain_slider_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_slider_sizer,
value=self.gain_slider,
callback=self.set_gain_slider,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=int,
proportion=1,
)
self.GridAdd(_gain_slider_sizer, 2, 0, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_outfile_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.frames_outfile_text,
callback=self.set_frames_outfile_text,
label="Frames filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._frames_outfile_text_static_text, 4, 0, 1, 1)
self._decim_tb_text_box = forms.text_box(
parent=self.GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.GridAdd(self._decim_tb_text_box, 1, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Acquisition start",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._datetime_text_static_text, 2, 0, 1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 2, 2, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-5, 1.0, 1.0/32768.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short*1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.gr_rms_xx_0 = gr.rms_cf(0.2)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_mn1_hrpt_deframer_0 = poesweather.mn1_hrpt_deframer(sync_check)
self.usrp_simple_source_x_0 = grc_usrp.simple_source_s(which=0, side=side, rx_ant="RXA")
self.usrp_simple_source_x_0.set_decim_rate(decim)
self.usrp_simple_source_x_0.set_frequency(freq, verbose=True)
self.usrp_simple_source_x_0.set_gain(gain)
self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=45,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Meteor M N1 HRPT FFT Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).Add(self.wxgui_fftsink2_0.win)
self.wxgui_numbersink2_0 = numbersink2.number_sink_f(
self.GetWin(),
unit="Units",
minval=0,
maxval=5000,
factor=1.0,
decimal_places=4,
ref_level=0,
sample_rate=samp_rate,
number_rate=15,
average=True,
avg_alpha=0.07,
label="S-Meter",
peak_hold=False,
show_gauge=True,
)
self.Add(self.wxgui_numbersink2_0.win)
##################################################
# Connections
##################################################
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_mn1_hrpt_deframer_0, 0))
self.connect((self.usrp_simple_source_x_0, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.wxgui_fftsink2_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.gr_rms_xx_0, 0))
self.connect((self.gr_rms_xx_0, 0), (self.wxgui_numbersink2_0, 0))
self.connect((self.poesweather_mn1_hrpt_deframer_0, 0), (self.gr_file_sink_0_0, 0))
def __init__(self,
pll_alpha=0.005,
satellite='NOAA18',
decim=50,
gain=25,
clock_alpha=0.005,
freq=1707e6,
deframer_sync_check=True,
deframer_insync_frames=2,
deframer_outsync_frames=5,
symb_rate=600 * 1109,
baseband_file=os.environ['HOME'] + '/noaa_hrpt_baseband.dat',
frames_file=os.environ['HOME'] + '/noaa_hrpt_frames.hmf'):
grc_wxgui.top_block_gui.__init__(self,
title="USRP2 NOAA HRPT Receiver")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.pll_alpha = pll_alpha
self.satellite = satellite
self.decim = decim
self.gain = gain
self.clock_alpha = clock_alpha
self.freq = freq
self.deframer_sync_check = deframer_sync_check
self.deframer_insync_frames = deframer_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.symb_rate = symb_rate
self.baseband_file = baseband_file
self.frames_file = frames_file
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6 / decim_tb
self.sps = sps = samp_rate / symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / samp_rate
self.hs = hs = int(sps / 2.0)
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S",
localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb),
"PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0,
1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1,
1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._frames_file_text_inf_static_text,
3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._datetime_text_static_text, 1, 0,
1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0 / 32767.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short * 1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_file_sink_0_1 = gr.file_sink(gr.sizeof_short * 2,
baseband_file)
self.gr_file_sink_0_1.set_unbuffered(False)
self.gr_float_to_complex_0 = gr.float_to_complex(1)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.gr_short_to_float_0 = gr.short_to_float()
self.gr_short_to_float_0_0 = gr.short_to_float()
self.gr_vector_to_streams_0 = gr.vector_to_streams(
gr.sizeof_short * 1, 2)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True, False)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.poesweather_univ_hrpt_deframer_0 = poesweather.univ_hrpt_deframer(
deframer_sync_check, 11090, deframer_insync_frames,
deframer_outsync_frames)
self.usrp2_source_xxxx2_0 = usrp2.source_16sc()
self.usrp2_source_xxxx2_0.set_decim(decim_tb)
self.usrp2_source_xxxx2_0.set_center_freq(freq_tb)
self.usrp2_source_xxxx2_0.set_gain(gain_tb)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=10,
ref_level=65,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_float_to_complex_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0),
(self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0),
(self.poesweather_univ_hrpt_deframer_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0),
(self.gr_file_sink_0_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.pll, 0))
self.connect((self.gr_float_to_complex_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_vector_to_streams_0, 0),
(self.gr_short_to_float_0, 0))
self.connect((self.gr_vector_to_streams_0, 1),
(self.gr_short_to_float_0_0, 0))
self.connect((self.usrp2_source_xxxx2_0, 0),
(self.gr_vector_to_streams_0, 0))
self.connect((self.usrp2_source_xxxx2_0, 0),
(self.gr_file_sink_0_1, 0))
self.connect((self.gr_short_to_float_0_0, 0),
(self.gr_float_to_complex_0, 1))
self.connect((self.gr_short_to_float_0, 0),
(self.gr_float_to_complex_0, 0))
def __init__(self, deframer_insync_frames=2, deframer_outsync_frames=5, deframer_sync_check=True, pll_alpha=0.005, baseband_file='/home/martin/GNURadioData/USRPSamples/AHRPT_MetOp-A_20100306_0758UTC_U2_d25.sam', satellite='MetOp', viterbi_sync_threshold=0.1, viterbi_outsync_frames=20, viterbi_insync_frames=5, frames_file=os.environ['HOME'] + '/MetOp-cadu_frames.cadu', clock_alpha=0.05, symb_rate=(3500e3/3+3500e3)/2, symb_rate_0=3*3500/4, viterbi_sync_check=True, decim=24):
grc_wxgui.top_block_gui.__init__(self, title="MetOp AHRPT Receiver from baseband file")
_icon_path = "/home/martin/.local/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.deframer_insync_frames = deframer_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.deframer_sync_check = deframer_sync_check
self.pll_alpha = pll_alpha
self.baseband_file = baseband_file
self.satellite = satellite
self.viterbi_sync_threshold = viterbi_sync_threshold
self.viterbi_outsync_frames = viterbi_outsync_frames
self.viterbi_insync_frames = viterbi_insync_frames
self.frames_file = frames_file
self.clock_alpha = clock_alpha
self.symb_rate = symb_rate
self.symb_rate_0 = symb_rate_0
self.viterbi_sync_check = viterbi_sync_check
self.decim = decim
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6/decim_tb
self.viterbi_sync_threshold_text = viterbi_sync_threshold_text = viterbi_sync_threshold
self.viterbi_sync_after_text = viterbi_sync_after_text = viterbi_insync_frames
self.viterbi_outofsync_after_text = viterbi_outofsync_after_text = viterbi_outsync_frames
self.viterbi_node_sync_text = viterbi_node_sync_text = viterbi_sync_check
self.sps = sps = samp_rate/symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Blocks
##################################################
self.rx_ntb = self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Input")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Viterbi decoder")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
title="QPSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1/samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
trig_mode=gr.gr_TRIG_MODE_AUTO,
y_axis_label="Counts",
)
self.rx_ntb.GetPage(0).Add(self.wxgui_scopesink2_1.win)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=-15,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self._viterbi_sync_threshold_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_threshold_text,
callback=self.set_viterbi_sync_threshold_text,
label="Viterbi node sync threshold [BER]",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_threshold_text_static_text, 3, 0, 1, 1)
self._viterbi_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_after_text,
callback=self.set_viterbi_sync_after_text,
label="Valid frames for Viterbi decoder sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_sync_after_text_static_text, 4, 0, 1, 1)
self._viterbi_outofsync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_outofsync_after_text,
callback=self.set_viterbi_outofsync_after_text,
label="Invalid frames for Viterbi decoder out of sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_outofsync_after_text_static_text, 5, 0, 1, 1)
self._viterbi_node_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_node_sync_text,
callback=self.set_viterbi_node_sync_text,
label="Viterbi node sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._viterbi_node_sync_text_static_text, 2, 0, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
self.poesweather_metop_cadu_deframer_0 = poesweather.metop_cadu_deframer(False, 1024, 5, 25)
self.gr_throttle_0 = gr.throttle(gr.sizeof_short*1, samp_rate*10)
self.gr_packed_to_unpacked_xx_0 = gr.packed_to_unpacked_bb(1, gr.GR_MSB_FIRST)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vcc((0.6, ))
self.gr_file_source_0_0_0_0 = gr.file_source(gr.sizeof_short*1, "/home/martin/hrpt/baseband/METOP-A/2011/07/24/METOP-A_2011-07-24_122614-U2d24.sam", False)
self.gr_file_sink_0 = gr.file_sink(gr.sizeof_char*1, "/home/martin/MetOp-cadu_frames.cadu")
self.gr_file_sink_0.set_unbuffered(False)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(pll_alpha_sl, pll_alpha_sl*pll_alpha_sl/4.0, 0.07, -0.07, 4)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(sps, clock_alpha_sl*clock_alpha_sl/4.0, 0.5, clock_alpha_sl, 0.05)
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self.fec_decode_viterbi_ahrpt_metop_cb_0 = fec.decode_viterbi_ahrpt_metop_cb(True, 0.2, 5, 50, 50)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
self.cs2cf = gr.interleaved_short_to_complex()
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).Add(self._baseband_file_text_inf_static_text)
##################################################
# Connections
##################################################
self.connect((self.gr_throttle_0, 0), (self.cs2cf, 0))
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.wxgui_scopesink2_1, 0))
self.connect((self.gr_agc_xx_0, 0), (self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_multiply_const_vxx_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.cs2cf, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_file_source_0_0_0_0, 0), (self.gr_throttle_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0), (self.fec_decode_viterbi_ahrpt_metop_cb_0, 0))
self.connect((self.fec_decode_viterbi_ahrpt_metop_cb_0, 0), (self.gr_packed_to_unpacked_xx_0, 0))
self.connect((self.poesweather_metop_cadu_deframer_0, 0), (self.gr_file_sink_0, 0))
self.connect((self.gr_packed_to_unpacked_xx_0, 0), (self.poesweather_metop_cadu_deframer_0, 0))
def __init__(self, baseband_file=os.environ['HOME'] + '/NOAA-XX.dat', satellite='NOAA-XX', decim=32, frames_file=os.environ['HOME'] + '/NOAA-XX.hrpt', sync_check=False):
gr.top_block.__init__(self, "NOAA HRPT Baseband To Frames")
##################################################
# Parameters
##################################################
self.baseband_file = baseband_file
self.satellite = satellite
self.decim = decim
self.frames_file = frames_file
self.sync_check = sync_check
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.sps = sps = sample_rate/sym_rate
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/noaa_hrpt.conf'
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat("satname", 'pll_alpha')
except: saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat("satname", 'clock_alpha')
except: saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True,False)
self.frame_sink = gr.file_sink(gr.sizeof_short*1, frames_file)
self.frame_sink.set_unbuffered(False)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, saved_clock_alpha**2/4.0, 0.5, saved_clock_alpha, max_clock_offset)
self.gr_file_source_0 = gr.file_source(gr.sizeof_short*1, baseband_file, False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex()
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.pll = noaa.hrpt_pll_cf(saved_pll_alpha, saved_pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_noaa_hrpt_deframer_0 = poesweather.noaa_hrpt_deframer(sync_check)
self.throttle = gr.throttle(gr.sizeof_short*1, sample_rate*10)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_noaa_hrpt_deframer_0, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.decoder, 0))
self.connect((self.poesweather_noaa_hrpt_deframer_0, 0), (self.frame_sink, 0))
self.connect((self.gr_file_source_0, 0), (self.throttle, 0))
self.connect((self.throttle, 0), (self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
def __init__(self, pll_alpha=0.005, satellite='NOAA18', decim=50, gain=25, clock_alpha=0.005, freq=1707e6, deframer_sync_check=True, deframer_insync_frames=2, deframer_outsync_frames=5, symb_rate=600*1109, baseband_file=os.environ['HOME'] + '/noaa_hrpt_baseband.dat', frames_file=os.environ['HOME'] + '/noaa_hrpt_frames.hmf'):
grc_wxgui.top_block_gui.__init__(self, title="USRP2 NOAA HRPT Receiver")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.pll_alpha = pll_alpha
self.satellite = satellite
self.decim = decim
self.gain = gain
self.clock_alpha = clock_alpha
self.freq = freq
self.deframer_sync_check = deframer_sync_check
self.deframer_insync_frames = deframer_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.symb_rate = symb_rate
self.baseband_file = baseband_file
self.frames_file = frames_file
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 100e6/decim_tb
self.sps = sps = samp_rate/symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/samp_rate
self.hs = hs = int(sps/2.0)
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S", localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = baseband_file
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0, 1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1, 1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._frames_file_text_inf_static_text, 3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._datetime_text_static_text, 1, 0, 1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0/32767.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short*1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_file_sink_0_1 = gr.file_sink(gr.sizeof_short*2, baseband_file)
self.gr_file_sink_0_1.set_unbuffered(False)
self.gr_float_to_complex_0 = gr.float_to_complex(1)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.gr_short_to_float_0 = gr.short_to_float()
self.gr_short_to_float_0_0 = gr.short_to_float()
self.gr_vector_to_streams_0 = gr.vector_to_streams(gr.sizeof_short*1, 2)
self.noaa_hrpt_decoder_0 = noaa.hrpt_decoder(True,False)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.poesweather_univ_hrpt_deframer_0 = poesweather.univ_hrpt_deframer(deframer_sync_check, 11090, deframer_insync_frames, deframer_outsync_frames)
self.usrp2_source_xxxx2_0 = usrp2.source_16sc()
self.usrp2_source_xxxx2_0.set_decim(decim_tb)
self.usrp2_source_xxxx2_0.set_center_freq(freq_tb)
self.usrp2_source_xxxx2_0.set_gain(gain_tb)
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=10,
ref_level=65,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_float_to_complex_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0), (self.noaa_hrpt_decoder_0, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.poesweather_univ_hrpt_deframer_0, 0))
self.connect((self.poesweather_univ_hrpt_deframer_0, 0), (self.gr_file_sink_0_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_agc_xx_0, 0), (self.pll, 0))
self.connect((self.gr_float_to_complex_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_vector_to_streams_0, 0), (self.gr_short_to_float_0, 0))
self.connect((self.gr_vector_to_streams_0, 1), (self.gr_short_to_float_0_0, 0))
self.connect((self.usrp2_source_xxxx2_0, 0), (self.gr_vector_to_streams_0, 0))
self.connect((self.usrp2_source_xxxx2_0, 0), (self.gr_file_sink_0_1, 0))
self.connect((self.gr_short_to_float_0_0, 0), (self.gr_float_to_complex_0, 1))
self.connect((self.gr_short_to_float_0, 0), (self.gr_float_to_complex_0, 0))
def __init__(self,
deframer_insync_frames=2,
viterbi_insync_frames=5,
deframer_outsync_frames=5,
viterbi_outsync_frames=20,
viterbi_sync_check=True,
viterbi_sync_threshold=0.1,
deframer_sync_check=True,
clock_alpha=0.005,
symb_rate=293883,
pll_alpha=0.005,
satellite='GOES-LRIT',
freq=1691.02e6,
gain=23,
decim=108,
side="A",
frames_file=os.environ['HOME'] +
'/GOES-LRIT_cadu_frames.cadu',
baseband_file=os.environ['HOME'] + '/GOES-LRIT_baseband.dat'):
grc_wxgui.top_block_gui.__init__(
self, title="LRIT Receiver from baseband file")
##################################################
# Parameters
##################################################
self.deframer_insync_frames = deframer_insync_frames
self.viterbi_insync_frames = viterbi_insync_frames
self.deframer_outsync_frames = deframer_outsync_frames
self.viterbi_outsync_frames = viterbi_outsync_frames
self.viterbi_sync_check = viterbi_sync_check
self.viterbi_sync_threshold = viterbi_sync_threshold
self.deframer_sync_check = deframer_sync_check
self.clock_alpha = clock_alpha
self.symb_rate = symb_rate
self.pll_alpha = pll_alpha
self.satellite = satellite
self.freq = freq
self.gain = gain
self.decim = decim
self.side = side
self.frames_file = frames_file
self.baseband_file = baseband_file
##################################################
# Variables
##################################################
self.decim_tb = decim_tb = decim
self.symb_rate_tb = symb_rate_tb = symb_rate
self.samp_rate = samp_rate = 64e6 / decim_tb
self.viterbi_sync_threshold_text = viterbi_sync_threshold_text = viterbi_sync_threshold
self.viterbi_sync_after_text = viterbi_sync_after_text = viterbi_insync_frames
self.viterbi_outofsync_after_text = viterbi_outofsync_after_text = viterbi_outsync_frames
self.viterbi_node_sync_text = viterbi_node_sync_text = viterbi_sync_check
self.sps = sps = samp_rate / symb_rate_tb
self.satellite_text = satellite_text = satellite
self.samp_rate_st = samp_rate_st = samp_rate
self.pll_alpha_sl = pll_alpha_sl = pll_alpha
self.gain_tb = gain_tb = gain
self.freq_tb = freq_tb = freq
self.frames_file_text_inf = frames_file_text_inf = frames_file
self.deframer_sync_after_text = deframer_sync_after_text = deframer_insync_frames
self.deframer_nosync_after_text = deframer_nosync_after_text = deframer_outsync_frames
self.deframer_check_sync_text = deframer_check_sync_text = deframer_sync_check
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S",
localtime())
self.clock_alpha_sl = clock_alpha_sl = clock_alpha
self.baseband_file_text_inf = baseband_file_text_inf = 'no output file'
##################################################
# Notebooks
##################################################
self.rx_ntb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "USRP Receiver")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb),
"PLL demodulator and Clock sync")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Viterbi decoder")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Deframer")
self.rx_ntb.AddPage(grc_wxgui.Panel(self.rx_ntb), "Output")
self.Add(self.rx_ntb)
##################################################
# Controls
##################################################
self._decim_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._decim_tb_text_box, 1, 3, 1, 1)
self._symb_rate_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
value=self.symb_rate_tb,
callback=self.set_symb_rate_tb,
label="Symbol rate",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(1).GridAdd(self._symb_rate_tb_text_box, 2, 1, 1, 1)
self._viterbi_sync_threshold_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_threshold_text,
callback=self.set_viterbi_sync_threshold_text,
label="Viterbi node sync threshold [BER]",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_sync_threshold_text_static_text, 3, 0, 1, 1)
self._viterbi_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_sync_after_text,
callback=self.set_viterbi_sync_after_text,
label="Valid frames for Viterbi decoder sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_sync_after_text_static_text, 4, 0, 1, 1)
self._viterbi_outofsync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_outofsync_after_text,
callback=self.set_viterbi_outofsync_after_text,
label="Invalid frames for Viterbi decoder out of sync",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_outofsync_after_text_static_text, 5, 0, 1, 1)
self._viterbi_node_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(2).GetWin(),
value=self.viterbi_node_sync_text,
callback=self.set_viterbi_node_sync_text,
label="Viterbi node sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(2).GridAdd(
self._viterbi_node_sync_text_static_text, 2, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Sat ",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._satellite_text_static_text, 1, 0,
1, 1)
self._samp_rate_st_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.samp_rate_st,
callback=self.set_samp_rate_st,
label="Sample rate",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._samp_rate_st_static_text, 1, 4, 1,
1)
_pll_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_pll_alpha_sl_sizer,
value=self.pll_alpha_sl,
callback=self.set_pll_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_pll_alpha_sl_sizer, 1, 0, 1, 1)
self._gain_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.gain_tb,
callback=self.set_gain_tb,
label="RX gain [dB]",
converter=forms.int_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._gain_tb_text_box, 1, 2, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(0).GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(0).GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.frames_file_text_inf,
callback=self.set_frames_file_text_inf,
label="Frames filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._frames_file_text_inf_static_text,
3, 0, 1, 1)
self._deframer_sync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_sync_after_text,
callback=self.set_deframer_sync_after_text,
label="Deframe sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_sync_after_text_static_text, 3, 0, 1, 1)
self._deframer_nosync_after_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_nosync_after_text,
callback=self.set_deframer_nosync_after_text,
label="Deframer out of sync after",
converter=forms.float_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_nosync_after_text_static_text, 4, 0, 1, 1)
self._deframer_check_sync_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(3).GetWin(),
value=self.deframer_check_sync_text,
callback=self.set_deframer_check_sync_text,
label="Deframer check sync enable",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(3).GridAdd(
self._deframer_check_sync_text_static_text, 2, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Local time of aquisition start",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(self._datetime_text_static_text, 1, 0,
1, 1)
_clock_alpha_sl_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_sl_text_box = forms.text_box(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_sl_slider = forms.slider(
parent=self.rx_ntb.GetPage(1).GetWin(),
sizer=_clock_alpha_sl_sizer,
value=self.clock_alpha_sl,
callback=self.set_clock_alpha_sl,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.rx_ntb.GetPage(1).GridAdd(_clock_alpha_sl_sizer, 1, 1, 1, 1)
self._baseband_file_text_inf_static_text = forms.static_text(
parent=self.rx_ntb.GetPage(4).GetWin(),
value=self.baseband_file_text_inf,
callback=self.set_baseband_file_text_inf,
label="Baseband filename",
converter=forms.str_converter(),
)
self.rx_ntb.GetPage(4).GridAdd(
self._baseband_file_text_inf_static_text, 4, 0, 1, 1)
##################################################
# Blocks
##################################################
self.fec_decode_viterbi_bpsk_fb_0 = fec.decode_viterbi_bpsk_fb(
viterbi_sync_check, viterbi_sync_threshold, viterbi_insync_frames,
viterbi_outsync_frames, viterbi_outsync_frames * 3)
self.gr_agc_xx_0 = gr.agc_cc(10e-6, 1, 1.0 / 32767.0, 1.0)
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_cc(
sps, clock_alpha_sl * clock_alpha_sl / 4.0, 0.5, clock_alpha_sl,
0.05)
self.gr_complex_to_real_0 = gr.complex_to_real(1)
self.gr_costas_loop_cc_0 = gr.costas_loop_cc(
pll_alpha_sl, pll_alpha_sl * pll_alpha_sl / 4.0, 0.07, -0.07, 2)
self.gr_file_source_0 = gr.file_source(
gr.sizeof_gr_complex * 1,
"/home/martin/GNURadioData/lrit/goes_lrit_D108AD64MHz.sam", True)
self.gr_multiply_const_vxx_0 = gr.multiply_const_vcc((1, ))
self.gr_null_sink_0 = gr.null_sink(gr.sizeof_char * 1)
self.gr_packed_to_unpacked_xx_0 = gr.packed_to_unpacked_bb(
1, gr.GR_MSB_FIRST)
self.gr_throttle_0 = gr.throttle(gr.sizeof_gr_complex * 1, samp_rate)
self.poesweather_metop_cadu_deframer_0 = poesweather.metop_cadu_deframer(
True, 1024, deframer_insync_frames, deframer_outsync_frames)
self.root_raised_cosine_filter_0 = gr.fir_filter_ccf(
1,
firdes.root_raised_cosine(1, samp_rate, symb_rate, 0.25,
int(11 * samp_rate / symb_rate)))
self.wxgui_fftsink1 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=2,
y_divs=10,
ref_level=12,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Not filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink1.win)
self.wxgui_fftsink2 = fftsink2.fft_sink_c(
self.rx_ntb.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=2,
y_divs=10,
ref_level=12,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="RRC filtered spectrum",
peak_hold=False,
)
self.rx_ntb.GetPage(0).Add(self.wxgui_fftsink2.win)
self.wxgui_scopesink2_1 = scopesink2.scope_sink_c(
self.rx_ntb.GetPage(1).GetWin(),
title="BPSK constellation diagram",
sample_rate=symb_rate,
v_scale=0.4,
v_offset=0,
t_scale=1 / samp_rate,
ac_couple=False,
xy_mode=True,
num_inputs=1,
)
self.rx_ntb.GetPage(1).Add(self.wxgui_scopesink2_1.win)
##################################################
# Connections
##################################################
self.connect((self.gr_agc_xx_0, 0),
(self.root_raised_cosine_filter_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0),
(self.gr_complex_to_real_0, 0))
self.connect((self.fec_decode_viterbi_bpsk_fb_0, 0),
(self.gr_packed_to_unpacked_xx_0, 0))
self.connect((self.gr_packed_to_unpacked_xx_0, 0),
(self.poesweather_metop_cadu_deframer_0, 0))
self.connect((self.gr_complex_to_real_0, 0),
(self.fec_decode_viterbi_bpsk_fb_0, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_multiply_const_vxx_0, 0))
self.connect((self.gr_costas_loop_cc_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.root_raised_cosine_filter_0, 0),
(self.gr_costas_loop_cc_0, 0))
self.connect((self.gr_multiply_const_vxx_0, 0),
(self.wxgui_scopesink2_1, 0))
self.connect((self.root_raised_cosine_filter_0, 0),
(self.wxgui_fftsink2, 0))
self.connect((self.gr_agc_xx_0, 0), (self.wxgui_fftsink1, 0))
self.connect((self.poesweather_metop_cadu_deframer_0, 0),
(self.gr_null_sink_0, 0))
self.connect((self.gr_throttle_0, 0), (self.gr_agc_xx_0, 0))
self.connect((self.gr_file_source_0, 0), (self.gr_throttle_0, 0))
def __init__(self,frame,panel,vbox,argv):
stdgui2.std_top_block.__init__ (self,frame,panel,vbox,argv)
usage="%prog: [options] [input_filename]. \n If you don't specify an input filename the usrp will be used as source\n " \
"Make sure your input capture file containes interleaved shorts not complex floats"
parser=OptionParser(option_class=eng_option)
parser.add_option("-R", "--rx-subdev-spec", type="subdev", default=None,
help="select USRP Rx side A or B (default=A)")
parser.add_option("-d", "--decim", type="int", default=64,
help="set fgpa decimation rate to DECIM [default=%default]")
parser.add_option("-f", "--freq", type="eng_float", default=519.25e6,
help="set frequency to FREQ", metavar="FREQ")
parser.add_option("-g", "--gain", type="eng_float", default=None,
help="set gain in dB (default is midpoint)")
parser.add_option("-c", "--contrast", type="eng_float", default=1.0,
help="set contrast (default is 1.0)")
parser.add_option("-b", "--brightness", type="eng_float", default=0.0,
help="set brightness (default is 0)")
parser.add_option("-8", "--width-8", action="store_true", default=False,
help="Enable 8-bit samples across USB")
parser.add_option("-p", "--pal", action="store_true", default=False,
help="PAL video format (this is the default)")
parser.add_option("-n", "--ntsc", action="store_true", default=False,
help="NTSC video format")
parser.add_option("-o", "--out-filename", type="string", default="sdl",
help="For example out_raw_uchar.gray. If you don't specify an output filename you will get a video_sink_sdl realtime output window. You then need to have gr-video-sdl installed)")
parser.add_option("-r", "--repeat", action="store_false", default=True,
help="repeat file in a loop")
parser.add_option("-N", "--no-hb", action="store_true", default=False,
help="don't use halfband filter in usrp")
(options, args) = parser.parse_args()
if not ((len(args) == 1) or (len(args) == 0)):
parser.print_help()
sys.exit(1)
if len(args) == 1:
filename = args[0]
else:
filename = None
self.frame = frame
self.panel = panel
self.contrast = options.contrast
self.brightness = options.brightness
self.state = "FREQ"
self.freq = 0
# build graph
self.u=None
usrp_decim = options.decim # 32
if not (options.out_filename=="sdl"):
options.repeat=False
if not ((filename is None) or (filename=="usrp")):
self.filesource = gr.file_source(gr.sizeof_short,filename,options.repeat) # file is data source
self.istoc = gr.interleaved_short_to_complex()
self.connect(self.filesource,self.istoc)
adc_rate=64e6
self.src=self.istoc
options.gain=0.0
self.gain=0.0
else:
if options.no_hb or (options.decim<8):
self.fpga_filename="std_4rx_0tx.rbf" #contains 4 Rx paths without halfbands and 0 tx paths
else:
self.fpga_filename="std_2rxhb_2tx.rbf" # contains 2 Rx paths with halfband filters and 2 tx paths (the default)
self.u = usrp.source_c(0,fpga_filename=self.fpga_filename) # usrp is data source
if options.width_8:
sample_width = 8
sample_shift = 8
format = self.u.make_format(sample_width, sample_shift)
r = self.u.set_format(format)
adc_rate = self.u.adc_rate() # 64 MS/s
self.u.set_decim_rate(usrp_decim)
if options.rx_subdev_spec is None:
options.rx_subdev_spec = pick_subdevice(self.u)
self.u.set_mux(usrp.determine_rx_mux_value(self.u, options.rx_subdev_spec))
self.subdev = usrp.selected_subdev(self.u, options.rx_subdev_spec)
print "Using RX d'board %s" % (self.subdev.side_and_name(),)
if options.gain is None:
# if no gain was specified, use the mid-point in dB
g = self.subdev.gain_range()
options.gain = float(g[0]+g[1])/2
self.src=self.u
usrp_rate = adc_rate / usrp_decim # 320 kS/s
f2uc=gr.float_to_uchar()
# sdl window as final sink
if not (options.pal or options.ntsc):
options.pal=True #set default to PAL
if options.pal:
lines_per_frame=625.0
frames_per_sec=25.0
show_width=768
elif options.ntsc:
lines_per_frame=525.0
frames_per_sec=29.97002997
show_width=640
width=int(usrp_rate/(lines_per_frame*frames_per_sec))
height=int(lines_per_frame)
if (options.out_filename=="sdl"):
#Here comes the tv screen, you have to build and install gr-video-sdl for this (subproject of gnuradio, only in cvs for now)
try:
video_sink = video_sdl.sink_uc ( frames_per_sec, width, height,0,show_width,height)
except:
print "gr-video-sdl is not installed"
print "realtime \"sdl\" video output window is not available"
raise SystemExit, 1
self.dst=video_sink
else:
print "You can use the imagemagick display tool to show the resulting imagesequence"
print "use the following line to show the demodulated TV-signal:"
print "display -depth 8 -size " +str(width)+ "x" + str(height) + " gray:" + options.out_filename
print "(Use the spacebar to advance to next frames)"
options.repeat=False
file_sink=gr.file_sink(gr.sizeof_char, options.out_filename)
self.dst =file_sink
self.agc=gr.agc_cc(1e-7,1.0,1.0) #1e-7
self.am_demod = gr.complex_to_mag ()
self.set_blacklevel=gr.add_const_ff(0.0)
self.invert_and_scale = gr.multiply_const_ff (0.0) #-self.contrast *128.0*255.0/(200.0)
# now wire it all together
#sample_rate=options.width*options.height*options.framerate
process_type='do_no_sync'
if process_type=='do_no_sync':
self.connect (self.src, self.agc,self.am_demod,self.invert_and_scale, self.set_blacklevel,f2uc,self.dst)
elif process_type=='do_tv_sync_adv':
#defaults: gr.tv_sync_adv (double sampling_freq, unsigned int tv_format,bool output_active_video_only=false, bool do_invert=false, double wanted_black_level=0.0, double wanted_white_level=255.0, double avg_alpha=0.1, double initial_gain=1.0, double initial_offset=0.0,bool debug=false)
self.tv_sync_adv=gr.tv_sync_adv(usrp_rate,0,False,False,0.0,255.0,0.01,1.0,0.0,False) #note, this block is not yet in cvs
self.connect (self.src, self.am_demod,self.invert_and_scale,self.tv_sync_adv,s2f,f2uc,self.dst)
elif process_type=='do_nullsink':
#self.connect (self.src, self.am_demod,self.invert_and_scale,f2uc,video_sink)
c2r=gr.complex_to_real()
nullsink=gr.null_sink(gr.sizeof_float)
self.connect (self.src, c2r,nullsink) #video_sink)
elif process_type=='do_tv_sync_corr':
frame_size=width*height #int(usrp_rate/25.0)
nframes=10# 32
search_window=20*nframes
debug=False
video_alpha=0.3 #0.1
corr_alpha=0.3
tv_corr=gr.tv_correlator_ff(frame_size,nframes, search_window, video_alpha, corr_alpha,debug) #Note: this block is not yet in cvs
shift=gr.add_const_ff(-0.7)
self.connect (self.src, self.agc,self.am_demod,tv_corr,self.invert_and_scale, self.set_blacklevel,f2uc,self.dst) #self.agc,
else: # process_type=='do_test_image':
src_vertical_bars = gr.sig_source_f (usrp_rate, gr.GR_SIN_WAVE, 10.0 *usrp_rate/320, 255,128)
self.connect(src_vertical_bars,f2uc,self.dst)
self._build_gui(vbox, usrp_rate, usrp_rate, usrp_rate)
if abs(options.freq) < 1e6:
options.freq *= 1e6
# set initial values
self.set_gain(options.gain)
self.set_contrast(self.contrast)
self.set_brightness(options.brightness)
if not(self.set_freq(options.freq)):
self._set_status_msg("Failed to set initial frequency")
def __init__(self,
if_rate, # Incoming sample rate
symbol_rate, # Original symbol rate
excess_bw, # RRC excess bandwidth, typically 0.35-0.5
costas_alpha, # Costas loop 1st order gain, typically 0.01-0.2
costas_beta, # Costas loop 2nd order gain, typically alpha^2/4.0
costas_max, # Costas loop max frequency offset in radians/sample
mm_gain_mu, # M&M loop 1st order gain, typically 0.001-0.2
mm_gain_omega, # M&M loop 2nd order gain, typically alpha^2/4.0
mm_omega_limit, # M&M loop max timing error
):
gr.hier_block2.__init__(self, "receive_path",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
grc_wxgui.top_block_gui.__init__(self, title="Top Block")
self._if_rate = if_rate
self._sps = int(self._if_rate/symbol_rate)
print "IF sample rate:", n2s(self._if_rate)
print "Symbol rate:", n2s(symbol_rate)
print "Samples/symbol:", self._sps
print "RRC bandwidth:", excess_bw
# Create AGC to scale input to unity
self._agc = gr.agc_cc(1e-5, 1.0, 1.0, 1.0)
# Create RRC with specified excess bandwidth
taps = gr.firdes.root_raised_cosine(1.0, # Gain
self._sps, # Sampling rate
1.0, # Symbol rate
excess_bw, # Roll-off factor
11*self._sps) # Number of taps
self._rrc = gr.fir_filter_ccf(1, taps)
# Create a Costas loop frequency/phase recovery block
print "Costas alpha:", costas_alpha
print "Costas beta:", costas_beta
print "Costas max:", costas_max
self._costas = gr.costas_loop_cc(costas_alpha, # PLL first order gain
costas_beta, # PLL second order gain
costas_max, # Max frequency offset rad/sample
-costas_max, # Min frequency offset rad/sample
2) # BPSK
# Create a M&M bit synchronization retiming block
mm_mu = 0.5
mm_omega = self._sps
print "MM gain mu:", mm_gain_mu
print "MM gain omega:", mm_gain_omega
print "MM omega limit:", mm_omega_limit
self._mm = gr.clock_recovery_mm_cc(mm_omega, # Initial samples/symbol
mm_gain_omega, # Second order gain
mm_mu, # Initial symbol phase
mm_gain_mu, # First order gain
mm_omega_limit) # Maximum timing offset
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0/symbol_rate)
# #Null for recuperate the out of snr
# self.gr_null_sink_0 = gr.null_sink(gr.sizeof_double)
#
# self.connect(self._snr_probe, (self.gr_null_sink_0,0))
self.connect(self._mm, self._snr_probe)
# Slice the resulting constellation into bits.
# Get inphase channel and make decision about 0
self._c2r = gr.complex_to_real()
self._slicer = gr.binary_slicer_fb()
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0/symbol_rate)
# #Null for recuperate the out of ber
# self.gr_null_sink_1 = gr.null_sink(gr.sizeof_double)
#
# self.connect(self._ber, self.gr_null_sink_1)
self.create_number_sink(self._sps)
self.connect((self._snr_probe, 0), (self.wxgui_numbersink2_0, 0))
self.connect((self._ber, 0), (self.wxgui_numbersink2_1, 0))
self.connect(self, self._agc, self._rrc, self._costas, self._mm,
self._c2r, self._slicer, self._descrambler, self._ber)
def __init__(self,
if_rate, # Incoming sample rate
symbol_rate, # Original symbol rate
excess_bw, # RRC excess bandwidth, typically 0.35-0.5
costas_alpha, # Costas loop 1st order gain, typically 0.01-0.2
costas_beta, # Costas loop 2nd order gain, typically alpha^2/4.0
costas_max, # Costas loop max frequency offset in radians/sample
mm_gain_mu, # M&M loop 1st order gain, typically 0.001-0.2
mm_gain_omega, # M&M loop 2nd order gain, typically alpha^2/4.0
mm_omega_limit, # M&M loop max timing error
):
gr.hier_block2.__init__(self, "receive_path",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
self._if_rate = if_rate
self._sps = int(self._if_rate/symbol_rate)
print "IF sample rate:", n2s(self._if_rate)
print "Symbol rate:", n2s(symbol_rate)
print "Samples/symbol:", self._sps
print "RRC bandwidth:", excess_bw
# Create AGC to scale input to unity
self._agc = gr.agc_cc(1e-5, 1.0, 1.0, 1.0)
# Create RRC with specified excess bandwidth
taps = gr.firdes.root_raised_cosine(1.0, # Gain
self._sps, # Sampling rate
1.0, # Symbol rate
excess_bw, # Roll-off factor
11*self._sps) # Number of taps
self._rrc = gr.fir_filter_ccf(1, taps)
# Create a Costas loop frequency/phase recovery block
print "Costas alpha:", costas_alpha
print "Costas beta:", costas_beta
print "Costas max:", costas_max
self._costas = gr.costas_loop_cc(costas_alpha, # PLL first order gain
costas_beta, # PLL second order gain
costas_max, # Max frequency offset rad/sample
-costas_max, # Min frequency offset rad/sample
2) # BPSK
# Create a M&M bit synchronization retiming block
mm_mu = 0.5
mm_omega = self._sps
print "MM gain mu:", mm_gain_mu
print "MM gain omega:", mm_gain_omega
print "MM omega limit:", mm_omega_limit
self._mm = gr.clock_recovery_mm_cc(mm_omega, # Initial samples/symbol
mm_gain_omega, # Second order gain
mm_mu, # Initial symbol phase
mm_gain_mu, # First order gain
mm_omega_limit) # Maximum timing offset
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0/symbol_rate)
self.connect(self._mm, self._snr_probe)
# Slice the resulting constellation into bits.
# Get inphase channel and make decision about 0
self._c2r = gr.complex_to_real()
self._slicer = gr.binary_slicer_fb()
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0/symbol_rate)
self.connect(self, self._agc, self._rrc, self._costas, self._mm,
self._c2r, self._slicer, self._descrambler, self._ber)
def __init__(self,
side="A",
gain=35,
decim=32,
sync_check=False,
satellite='METEOR-M-1',
frames_file=os.environ['HOME'] + '/METEOR-M-1.hrpt',
freq=1700e6):
grc_wxgui.top_block_gui.__init__(self, title="USRP NOAA HRPT Receiver")
_icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))
##################################################
# Parameters
##################################################
self.side = side
self.gain = gain
self.decim = decim
self.sync_check = sync_check
self.satellite = satellite
self.frames_file = frames_file
self.freq = freq
##################################################
# Variables
##################################################
self.sym_rate = sym_rate = 600 * 1109
self.samp_rate = samp_rate = 64e6 / decim
self.config_filename = config_filename = os.environ[
'HOME'] + '/.gnuradio/mn1_hrpt.conf'
self.sps = sps = samp_rate / sym_rate
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try:
saved_pll_alpha = self._saved_pll_alpha_config.getfloat(
"satname", 'pll_alpha')
except:
saved_pll_alpha = 0.005
self.saved_pll_alpha = saved_pll_alpha
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try:
saved_clock_alpha = self._saved_clock_alpha_config.getfloat(
"satname", 'clock_alpha')
except:
saved_clock_alpha = 0.001
self.saved_clock_alpha = saved_clock_alpha
self.sync_check_txt = sync_check_txt = sync_check
self.side_text = side_text = side
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try:
saved_gain = self._saved_gain_config.getfloat("satname", 'gain')
except:
saved_gain = gain
self.saved_gain = saved_gain
self.satellite_text = satellite_text = satellite
self.sample_rate_text = sample_rate_text = samp_rate
self.pll_alpha = pll_alpha = saved_pll_alpha
self.max_clock_offset = max_clock_offset = 0.1
self.max_carrier_offset = max_carrier_offset = 2 * math.pi * 100e3 / samp_rate
self.hs = hs = int(sps / 2.0)
self.gain_slider = gain_slider = gain
self.freq_tb = freq_tb = freq
self.frames_outfile_text = frames_outfile_text = frames_file
self.decim_tb = decim_tb = decim
self.datetime_text = datetime_text = strftime("%A, %B %d %Y %H:%M:%S",
localtime())
self.clock_alpha = clock_alpha = saved_clock_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays),
"RX Meteor M N1 HRPT")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Information")
self.Add(self.displays)
##################################################
# Controls
##################################################
self._sync_check_txt_static_text = forms.static_text(
parent=self.GetWin(),
value=self.sync_check_txt,
callback=self.set_sync_check_txt,
label="Sync check",
converter=forms.float_converter(),
)
self.GridAdd(self._sync_check_txt_static_text, 0, 2, 1, 1)
self._side_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.side_text,
callback=self.set_side_text,
label="USRP Side",
converter=forms.str_converter(),
)
self.GridAdd(self._side_text_static_text, 0, 0, 1, 1)
self._satellite_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.satellite_text,
callback=self.set_satellite_text,
label="Satellite",
converter=forms.str_converter(),
)
self.GridAdd(self._satellite_text_static_text, 0, 1, 1, 1)
self._sample_rate_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.sample_rate_text,
callback=self.set_sample_rate_text,
label="Sample rate",
converter=forms.float_converter(),
)
self.displays.GetPage(1).GridAdd(self._sample_rate_text_static_text, 3,
0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.005,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 2, 1, 1, 1)
_gain_slider_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_slider_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_slider_sizer,
value=self.gain_slider,
callback=self.set_gain_slider,
label="Gain",
converter=forms.int_converter(),
proportion=0,
)
self._gain_slider_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_slider_sizer,
value=self.gain_slider,
callback=self.set_gain_slider,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=int,
proportion=1,
)
self.GridAdd(_gain_slider_sizer, 2, 0, 1, 1)
self._freq_tb_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq_tb,
callback=self.set_freq_tb,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_tb_text_box, 1, 1, 1, 1)
self._frames_outfile_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.frames_outfile_text,
callback=self.set_frames_outfile_text,
label="Frames filename",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._frames_outfile_text_static_text,
4, 0, 1, 1)
self._decim_tb_text_box = forms.text_box(
parent=self.GetWin(),
value=self.decim_tb,
callback=self.set_decim_tb,
label="Decimation",
converter=forms.int_converter(),
)
self.GridAdd(self._decim_tb_text_box, 1, 0, 1, 1)
self._datetime_text_static_text = forms.static_text(
parent=self.displays.GetPage(1).GetWin(),
value=self.datetime_text,
callback=self.set_datetime_text,
label="Acquisition start",
converter=forms.str_converter(),
)
self.displays.GetPage(1).GridAdd(self._datetime_text_static_text, 2, 0,
1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.001,
maximum=0.1,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 2, 2, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-5, 1.0, 1.0 / 32768.0, 1.0)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(
sps / 2.0, clock_alpha**2 / 4.0, 0.5, clock_alpha,
max_clock_offset)
self.gr_file_sink_0_0 = gr.file_sink(gr.sizeof_short * 1, frames_file)
self.gr_file_sink_0_0.set_unbuffered(False)
self.gr_interleaved_short_to_complex_0 = gr.interleaved_short_to_complex(
)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0 / hs, 4000)
self.gr_rms_xx_0 = gr.rms_cf(0.2)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2 / 4.0,
max_carrier_offset)
self.poesweather_mn1_hrpt_deframer_0 = poesweather.mn1_hrpt_deframer(
sync_check)
self.usrp_simple_source_x_0 = grc_usrp.simple_source_s(which=0,
side=side,
rx_ant="RXA")
self.usrp_simple_source_x_0.set_decim_rate(decim)
self.usrp_simple_source_x_0.set_frequency(freq, verbose=True)
self.usrp_simple_source_x_0.set_gain(gain)
self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=0,
y_per_div=5,
y_divs=10,
ref_level=45,
ref_scale=2.0,
sample_rate=samp_rate,
fft_size=1024,
fft_rate=30,
average=True,
avg_alpha=0.1,
title="Meteor M N1 HRPT FFT Spectrum",
peak_hold=False,
)
self.displays.GetPage(0).Add(self.wxgui_fftsink2_0.win)
self.wxgui_numbersink2_0 = numbersink2.number_sink_f(
self.GetWin(),
unit="Units",
minval=0,
maxval=5000,
factor=1.0,
decimal_places=4,
ref_level=0,
sample_rate=samp_rate,
number_rate=15,
average=True,
avg_alpha=0.07,
label="S-Meter",
peak_hold=False,
show_gauge=True,
)
self.Add(self.wxgui_numbersink2_0.win)
##################################################
# Connections
##################################################
self.connect((self.gr_binary_slicer_fb_0, 0),
(self.poesweather_mn1_hrpt_deframer_0, 0))
self.connect((self.usrp_simple_source_x_0, 0),
(self.gr_interleaved_short_to_complex_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.agc, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0),
(self.gr_binary_slicer_fb_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.gr_moving_average_xx_0, 0),
(self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.wxgui_fftsink2_0, 0))
self.connect((self.gr_interleaved_short_to_complex_0, 0),
(self.gr_rms_xx_0, 0))
self.connect((self.gr_rms_xx_0, 0), (self.wxgui_numbersink2_0, 0))
self.connect((self.poesweather_mn1_hrpt_deframer_0, 0),
(self.gr_file_sink_0_0, 0))
def __init__(self):
grc_wxgui.top_block_gui.__init__(self, title="USRP HRPT Receiver")
##################################################
# Variables
##################################################
self.config_filename = config_filename = os.environ['HOME']+'/.gnuradio/config.conf'
self._decim_config = ConfigParser.ConfigParser()
self._decim_config.read(config_filename)
try: decim = self._decim_config.getfloat('usrp_rx_hrpt', 'decim')
except: decim = 32
self.decim = decim
self.sym_rate = sym_rate = 600*1109
self.sample_rate = sample_rate = 64e6/decim
self.sps = sps = sample_rate/sym_rate
self._side_config = ConfigParser.ConfigParser()
self._side_config.read(config_filename)
try: side = self._side_config.get('usrp_rx_hrpt', 'side')
except: side = 'A'
self.side = side
self._saved_pll_alpha_config = ConfigParser.ConfigParser()
self._saved_pll_alpha_config.read(config_filename)
try: saved_pll_alpha = self._saved_pll_alpha_config.getfloat('usrp_rx_hrpt', 'pll_alpha')
except: saved_pll_alpha = 0.01
self.saved_pll_alpha = saved_pll_alpha
self._saved_gain_config = ConfigParser.ConfigParser()
self._saved_gain_config.read(config_filename)
try: saved_gain = self._saved_gain_config.getfloat('usrp_rx_hrpt', 'gain')
except: saved_gain = 35
self.saved_gain = saved_gain
self._saved_freq_config = ConfigParser.ConfigParser()
self._saved_freq_config.read(config_filename)
try: saved_freq = self._saved_freq_config.getfloat('usrp_rx_hrpt', 'freq')
except: saved_freq = 1698e6
self.saved_freq = saved_freq
self._saved_clock_alpha_config = ConfigParser.ConfigParser()
self._saved_clock_alpha_config.read(config_filename)
try: saved_clock_alpha = self._saved_clock_alpha_config.getfloat('usrp_rx_hrpt', 'clock_alpha')
except: saved_clock_alpha = 0.01
self.saved_clock_alpha = saved_clock_alpha
self.side_text = side_text = side
self.pll_alpha = pll_alpha = saved_pll_alpha
self._output_filename_config = ConfigParser.ConfigParser()
self._output_filename_config.read(config_filename)
try: output_filename = self._output_filename_config.get('usrp_rx_hrpt', 'filename')
except: output_filename = 'frames.hrpt'
self.output_filename = output_filename
self.max_clock_offset = max_clock_offset = 100e-6
self.max_carrier_offset = max_carrier_offset = 2*math.pi*100e3/sample_rate
self.hs = hs = int(sps/2.0)
self.gain = gain = saved_gain
self.freq = freq = saved_freq
self.decim_text = decim_text = decim
self.clock_alpha = clock_alpha = saved_clock_alpha
##################################################
# Notebooks
##################################################
self.displays = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Spectrum")
self.displays.AddPage(grc_wxgui.Panel(self.displays), "Demod")
self.GridAdd(self.displays, 2, 0, 1, 4)
##################################################
# Controls
##################################################
self._side_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.side_text,
callback=self.set_side_text,
label="USRP Side",
converter=forms.str_converter(),
)
self.GridAdd(self._side_text_static_text, 1, 0, 1, 1)
_pll_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._pll_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
label="PLL Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._pll_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_pll_alpha_sizer,
value=self.pll_alpha,
callback=self.set_pll_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_pll_alpha_sizer, 0, 2, 1, 1)
_gain_sizer = wx.BoxSizer(wx.VERTICAL)
self._gain_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
label="RX Gain",
converter=forms.float_converter(),
proportion=0,
)
self._gain_slider = forms.slider(
parent=self.GetWin(),
sizer=_gain_sizer,
value=self.gain,
callback=self.set_gain,
minimum=0,
maximum=100,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_gain_sizer, 0, 1, 1, 1)
self._freq_text_box = forms.text_box(
parent=self.GetWin(),
value=self.freq,
callback=self.set_freq,
label="Frequency",
converter=forms.float_converter(),
)
self.GridAdd(self._freq_text_box, 0, 0, 1, 1)
self._decim_text_static_text = forms.static_text(
parent=self.GetWin(),
value=self.decim_text,
callback=self.set_decim_text,
label="Decimation",
converter=forms.float_converter(),
)
self.GridAdd(self._decim_text_static_text, 1, 1, 1, 1)
_clock_alpha_sizer = wx.BoxSizer(wx.VERTICAL)
self._clock_alpha_text_box = forms.text_box(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
label="Clock Alpha",
converter=forms.float_converter(),
proportion=0,
)
self._clock_alpha_slider = forms.slider(
parent=self.GetWin(),
sizer=_clock_alpha_sizer,
value=self.clock_alpha,
callback=self.set_clock_alpha,
minimum=0.0,
maximum=0.5,
num_steps=100,
style=wx.SL_HORIZONTAL,
cast=float,
proportion=1,
)
self.GridAdd(_clock_alpha_sizer, 0, 3, 1, 1)
##################################################
# Blocks
##################################################
self.agc = gr.agc_cc(1e-6, 1.0, 1.0, 1.0)
self.decoder = noaa.hrpt_decoder(True,True)
self.deframer = noaa.hrpt_deframer()
self.demod_scope = scopesink2.scope_sink_f(
self.displays.GetPage(1).GetWin(),
title="Post-Demod",
sample_rate=sym_rate*2.0,
v_scale=0.5,
v_offset=0,
t_scale=10.0/sym_rate,
ac_couple=False,
xy_mode=False,
num_inputs=1,
)
self.displays.GetPage(1).GridAdd(self.demod_scope.win, 0, 0, 1, 1)
self.frame_sink = gr.file_sink(gr.sizeof_short*1, output_filename)
self.gr_binary_slicer_fb_0 = gr.binary_slicer_fb()
self.gr_clock_recovery_mm_xx_0 = gr.clock_recovery_mm_ff(sps/2.0, clock_alpha**2/4.0, 0.5, clock_alpha, max_clock_offset)
self.gr_moving_average_xx_0 = gr.moving_average_ff(hs, 1.0/hs, 4000)
self.pll = noaa.hrpt_pll_cf(pll_alpha, pll_alpha**2/4.0, max_carrier_offset)
self.rx_fft = fftsink2.fft_sink_c(
self.displays.GetPage(0).GetWin(),
baseband_freq=freq,
y_per_div=5,
y_divs=8,
ref_level=-5,
ref_scale=2.0,
sample_rate=sample_rate,
fft_size=1024,
fft_rate=15,
average=True,
avg_alpha=0.1,
title="RX Spectrum",
peak_hold=False,
size=(640, 360),
)
self.displays.GetPage(0).GridAdd(self.rx_fft.win, 0, 0, 1, 1)
self.usrp_source = grc_usrp.simple_source_c(which=0, side=side, rx_ant="RXA")
self.usrp_source.set_decim_rate(decim)
self.usrp_source.set_frequency(freq, verbose=True)
self.usrp_source.set_gain(gain)
##################################################
# Connections
##################################################
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.gr_binary_slicer_fb_0, 0))
self.connect((self.deframer, 0), (self.frame_sink, 0))
self.connect((self.deframer, 0), (self.decoder, 0))
self.connect((self.gr_clock_recovery_mm_xx_0, 0), (self.demod_scope, 0))
self.connect((self.gr_moving_average_xx_0, 0), (self.gr_clock_recovery_mm_xx_0, 0))
self.connect((self.pll, 0), (self.gr_moving_average_xx_0, 0))
self.connect((self.agc, 0), (self.pll, 0))
self.connect((self.usrp_source, 0), (self.agc, 0))
self.connect((self.agc, 0), (self.rx_fft, 0))
self.connect((self.gr_binary_slicer_fb_0, 0), (self.deframer, 0))