import os
import golly as g
from glife import *
selrect = g.getselrect()
if len(selrect) == 0: g.exit("There is no selection.")
# check that a layer is available for the metafied pattern;
# if metafied layer already exists then we'll use that
layername = "metafied"
metalayer = -1
for i in xrange(g.numlayers()):
if g.getname(i) == layername:
metalayer = i
break
if metalayer < 0 and g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# note that getrule returns canonical rule string
rulestr = g.getrule().split(":")[0]
if (not rulestr.startswith("B")) or (rulestr.find("/S") == -1):
g.exit("This script only works with B*/S* rules.")
# get the current selection
slist = g.getcells(selrect)
selwidth = selrect[2]
selheight = selrect[3]
# create a 2D list of 0s and 1s representing entire selection
livecell = [[0 for y in xrange(selheight)] for x in xrange(selwidth)]
for i in xrange(0, len(slist), 2):
t.put(barwd * (state + 1) - barwd / 2 - twd / 2, -barht - tht - 3)
# --------------------------------------------------------------------
if g.empty(): g.exit("There is no pattern.")
if g.numstates() == 256: g.exit("No room for extra state.")
# check that a layer is available for the histogram
histname = "histogram"
histlayer = -1
for i in xrange(g.numlayers()):
if g.getname(i) == histname:
histlayer = i
break
if histlayer == -1 and g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# use selection rect if it exists, otherwise use pattern bounds
label = "Selection"
r = rect(g.getselrect())
if r.empty:
label = "Pattern"
r = rect(g.getrect())
# count all cell states in r
g.show("Counting cell states...")
counted = 0
totalcells = r.wd * r.ht
statecount = [0] * g.numstates()
oldsecs = time()
else:
popfunc = lambda: g.getpop()
for i in range(numsteps):
g.run(1)
if g.empty():
break
poplist.append(int(popfunc()))
h = int(g.hash(g.getrect()))
if h in hashlist:
break
hashlist.append(h)
layername = "recurrent plot"
poplayer = -1
for i in xrange(g.numlayers()):
if g.getname(i) == layername:
poplayer = i
break
if poplayer == -1 and g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
if poplayer == -1:
poplayer = g.addlayer()
else:
g.setlayer(poplayer)
g.new(layername)
rp_plot(poplist)
g.setlayer(currindex)
startindex = currindex - 1
envindex = currindex - 2
elif currindex + 1 < g.numlayers() \
and g.getname(currindex) == startname \
and g.getname(currindex - 1) == envname :
# switch from starting layer to current layer and continue
currindex += 1
g.setlayer(currindex)
startindex = currindex - 1
envindex = currindex - 2
else:
# start a new envelope using pattern in current layer
if g.numlayers() + 1 > g.maxlayers():
g.exit("You need to delete a couple of layers.")
if g.numlayers() + 2 > g.maxlayers():
g.exit("You need to delete a layer.")
# get current layer's starting pattern
startpatt = g.getcells(g.getrect())
envindex = g.addlayer() # create layer for remembering all live cells
g.setcolors([-1,100,100,100]) # set all states to darkish gray
g.putcells(startpatt) # copy starting pattern into this layer
startindex = g.addlayer() # create layer for starting pattern
g.setcolors([-1,0,255,0]) # set all states to green
g.putcells(startpatt) # copy starting pattern into this layer
import os
import golly as g
from glife import *
selrect = g.getselrect()
if len(selrect) == 0: g.exit("There is no selection.")
# check that a layer is available for the metafied pattern;
# if metafied layer already exists then we'll use that
layername = "metafied"
metalayer = -1
for i in xrange(g.numlayers()):
if g.getname(i) == layername:
metalayer = i
break
if metalayer < 0 and g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# note that getrule returns canonical rule string
rulestr = g.getrule().split(":")[0]
if (not rulestr.startswith("B")) or (rulestr.find("/S") == -1):
g.exit("This script only works with B*/S* rules.")
# get the current selection
slist = g.getcells(selrect)
selwidth = selrect[2]
selheight = selrect[3]
# create a 2D list of 0s and 1s representing entire selection
livecell = [[0 for y in xrange(selheight)] for x in xrange(selwidth)]
for i in xrange(0, len(slist), 2):
def export_icons(iconsection, rulename):
global multi_color_icons
if multi_color_icons:
# prepend a new @COLORS section with the average colors in each icon
iconsection = create_average_colors(iconsection) + iconsection
# replace any illegal filename chars with underscores
filename = rulename.replace("/", "_").replace("\\", "_")
# we will only create/update a .rule file in the user's rules folder
# (ie. we don't modify the supplied Rules folder)
rulepath = g.getdir("rules") + filename + ".rule"
fileexists = os.path.isfile(rulepath)
if fileexists:
# .rule file already exists so replace or add @ICONS section
rulefile = open(rulepath, "rU")
# create a temporary file for writing new rule info
temphdl, temppath = mkstemp()
tempfile = open(temppath, "w")
wroteicons = False
skiplines = False
for line in rulefile:
if line.startswith("@ICONS"):
# replace the existing @ICONS section
tempfile.write(iconsection)
wroteicons = True
skiplines = True
elif line.startswith("@COLORS") and multi_color_icons:
# skip the existing @COLORS section
# (iconsection contains a new @COLORS section)
skiplines = True
elif skiplines and line.startswith("@"):
if wroteicons: tempfile.write("\n")
skiplines = False
if not skiplines:
tempfile.write(line)
if not wroteicons:
# .rule file had no @ICONS section
tempfile.write("\n")
tempfile.write(iconsection)
# close files
rulefile.close()
tempfile.flush()
tempfile.close()
os.close(temphdl)
# remove original .rule file and rename temporary file
os.remove(rulepath)
move(temppath, rulepath)
else:
# .rule file doesn't exist so create it
rulefile = open(rulepath, "w")
rulefile.write("@RULE " + filename + "\n\n")
if not multi_color_icons:
# grayscale icons, so check if Rules/filename.rule exists
# and if so copy any existing @COLORS section
suppliedrule = g.getdir("app") + "Rules/" + filename + ".rule"
if os.path.isfile(suppliedrule):
colordata = get_color_section(suppliedrule)
if len(colordata) > 0:
rulefile.write(colordata)
rulefile.write(iconsection)
rulefile.flush()
rulefile.close()
# create another layer for displaying the new icons
if g.numlayers() < g.maxlayers():
g.addlayer()
g.new("icon test")
g.setrule(rulename)
for i in range(g.numstates() - 1):
g.setcell(i, 0, i + 1)
g.fit()
g.setoption("showicons", True)
g.update()
if fileexists:
g.note("Updated the icon data in " + rulepath)
else:
g.note("Created " + rulepath)
if state > 0:
g.setcell(x+col, y+row, state)
# --------------------------------------------------------------------
def multi_color_icons(iconcolors):
# return True if at least one icon color isn't a shade of gray
for R,G,B in iconcolors:
if R != G or G != B: return True
# grayscale
return False
# --------------------------------------------------------------------
# check that a layer is available
if g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# WARNING: changing this prefix will require same change in icon-exporter.py
layerprefix = "imported icons for "
if g.getname().startswith(layerprefix):
g.exit("You probably meant to run icon-exporter.py.")
g.addlayer()
rulename = g.getrule().split(":")[0]
# search for rulename.rule and import any icon data (also builds iconcolors)
import_icons(rulename)
if len(iconcolors) == 0 and ("-" in rulename) and not (rulename.endswith("-shared")):
# rulename.rule has no icons and rulename contains a hyphen, so
except:
# getrect failed because pattern is too big
g.fit()
# --------------------------------------------------------------------
if g.empty(): g.exit("There is no pattern.")
# check that a layer is available for population plot
layername = "population plot"
poplayer = -1
for i in xrange(g.numlayers()):
if g.getname(i) == layername:
poplayer = i
break
if poplayer == -1 and g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# prompt user for number of steps
numsteps = xlen
s = g.getstring("Enter the number of steps:",
str(numsteps), "Population plotter")
if len(s) > 0: numsteps = int(s)
if numsteps <= 0: g.exit()
# generate pattern for given number of steps
poplist = [ int(g.getpop()) ]
genlist = [ int(g.getgen()) ]
oldsecs = time()
for i in xrange(numsteps):
g.step()
g.setlayer(currindex)
startindex = currindex - 1
envindex = currindex - 2
elif currindex + 1 < g.numlayers() \
and g.getname(currindex) == startname \
and g.getname(currindex - 1) == envname :
# switch from starting layer to current layer and continue
currindex += 1
g.setlayer(currindex)
startindex = currindex - 1
envindex = currindex - 2
else:
# start a new envelope using pattern in current layer
if g.numlayers() + 1 > g.maxlayers():
g.exit("You need to delete a couple of layers.")
if g.numlayers() + 2 > g.maxlayers():
g.exit("You need to delete a layer.")
# get current layer's starting pattern
startpatt = g.getcells(g.getrect())
envindex = g.addlayer() # create layer for remembering all live cells
g.setcolors([-1, 100, 100, 100]) # set all states to darkish gray
g.putcells(startpatt) # copy starting pattern into this layer
startindex = g.addlayer() # create layer for starting pattern
g.setcolors([-1, 0, 255, 0]) # set all states to green
g.putcells(startpatt) # copy starting pattern into this layer
def export_icons(iconsection, rulename):
global multi_color_icons
if multi_color_icons:
# prepend a new @COLORS section with the average colors in each icon
iconsection = create_average_colors(iconsection) + iconsection
# replace any illegal filename chars with underscores
filename = rulename.replace("/","_").replace("\\","_")
# we will only create/update a .rule file in the user's rules folder
# (ie. we don't modify the supplied Rules folder)
rulepath = g.getdir("rules") + filename + ".rule"
fileexists = os.path.isfile(rulepath)
if fileexists:
# .rule file already exists so replace or add @ICONS section
rulefile = open(rulepath,"rU")
# create a temporary file for writing new rule info
temphdl, temppath = mkstemp()
tempfile = open(temppath,"w")
wroteicons = False
skiplines = False
for line in rulefile:
if line.startswith("@ICONS"):
# replace the existing @ICONS section
tempfile.write(iconsection)
wroteicons = True
skiplines = True
elif line.startswith("@COLORS") and multi_color_icons:
# skip the existing @COLORS section
# (iconsection contains a new @COLORS section)
skiplines = True
elif skiplines and line.startswith("@"):
if wroteicons: tempfile.write("\n")
skiplines = False
if not skiplines:
tempfile.write(line)
if not wroteicons:
# .rule file had no @ICONS section
tempfile.write("\n")
tempfile.write(iconsection)
# close files
rulefile.close()
tempfile.flush()
tempfile.close()
os.close(temphdl)
# remove original .rule file and rename temporary file
os.remove(rulepath)
move(temppath, rulepath)
else:
# .rule file doesn't exist so create it
rulefile = open(rulepath,"w")
rulefile.write("@RULE " + filename + "\n\n")
if not multi_color_icons:
# grayscale icons, so check if Rules/filename.rule exists
# and if so copy any existing @COLORS section
suppliedrule = g.getdir("app") + "Rules/" + filename + ".rule"
if os.path.isfile(suppliedrule):
colordata = get_color_section(suppliedrule)
if len(colordata) > 0:
rulefile.write(colordata)
rulefile.write(iconsection)
rulefile.flush()
rulefile.close()
# create another layer for displaying the new icons
if g.numlayers() < g.maxlayers():
g.addlayer()
g.new("icon test")
g.setrule(rulename)
for i in xrange(g.numstates()-1):
g.setcell(i, 0, i+1)
g.fit()
g.setoption("showicons",True)
g.update()
if fileexists:
g.note("Updated the icon data in " + rulepath)
else:
g.note("Created " + rulepath)
# --------------------------------------------------------------------
def multi_color_icons(iconcolors):
# return True if at least one icon color isn't a shade of gray
for R, G, B in iconcolors:
if R != G or G != B: return True
# grayscale
return False
# --------------------------------------------------------------------
# check that a layer is available
if g.numlayers() == g.maxlayers():
g.exit("You need to delete a layer.")
# WARNING: changing this prefix will require same change in icon-exporter.py
layerprefix = "imported icons for "
if g.getname().startswith(layerprefix):
g.exit("You probably meant to run icon-exporter.py.")
g.addlayer()
rulename = g.getrule().split(":")[0]
# search for rulename.rule and import any icon data (also builds iconcolors)
import_icons(rulename)
if len(iconcolors) == 0 and (
"-" in rulename) and not (rulename.endswith("-shared")):
