class source(gr.basic_block):
"""
docstring for block source
"""
def __init__(self, serial=None):
gr.basic_block.__init__(self,
name="source",
in_sig=None,
out_sig=[numpy.byte])
self.history = []
try:
# self.device = GreatFET(serial_number=serial)
self.device = GreatFET()
except greatfet.errors.DeviceNotFoundError:
raise
self.device.vendor_request_out(vendor_requests.SDIR_START)
def general_work(self, input_items, output_items):
if len(self.history) < len(output_items[0]):
self.history.extend(self.device.device.read(0x81, 0x4000, 1000))
out_len = min(len(output_items[0]), len(self.history))
output_items[0][:out_len] = numpy.array(self.history[:out_len],
dtype=numpy.byte)
self.history = self.history[out_len:]
return out_len
def main():
logfile = 'log.bin'
parser = argparse.ArgumentParser(
description="Utility for experimenting with GreatFET's ADC")
parser.add_argument('-s',
dest='serial',
metavar='<serialnumber>',
type=str,
help="Serial number of device, if multiple devices",
default=None)
parser.add_argument('-f',
dest='filename',
metavar='<filename>',
type=str,
help="Write data to file",
default=logfile)
parser.add_argument('-v',
dest='verbose',
action='store_true',
help="Write data from file")
parser.add_argument('-a',
dest='adc',
action='store_true',
help="Use internal ADC")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(
device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(
args.serial),
file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
if args.adc:
device.vendor_request_out(vendor_requests.ADC_INIT)
#else:
# device.vendor_request_out(vendor_requests.SDIR_RX_START)
while True:
data = device.vendor_request_in(vendor_requests.ADC_READ, length=2)
print('%d' % (data[1] << 8 | data[0]))
time.sleep(1)
if not args.adc:
device.vendor_request_out(vendor_requests.SDIR_RX_STOP)
def main():
parser = argparse.ArgumentParser(description="Drive ADF7242 via SPI")
parser.add_argument('-r', '--read-register', dest='read_reg', metavar='<addr>', default=None,
type=auto_int, help="Read register")
parser.add_argument('-w', '--write-register', dest='write_reg', default=None,
nargs=2, metavar=('<addr>', '<value>'),
type=auto_int, help="Write register")
parser.add_argument('-c', '--command', dest='command', default=None,
type=auto_int, metavar='<command>', help="SPI command")
parser.add_argument('-S', '--status', action='store_true', help='Get status byte')
parser.add_argument('-t', '--temperature', action='store_true', help='Read temperature')
parser.add_argument('--reset', action='store_true', help='Reset ADF7242')
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
args = parser.parse_args()
# Determine whether we're going to log to the stdout, or not at all.
log_function = log_verbose if args.verbose else log_silent
# Create our GreatFET connection.
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
device.vendor_request_out(vendor_requests.SPI_INIT)
if args.reset:
adf7242_command(device, 0xC7)
if args.read_reg:
print('Register value: {:02x}'.format(adf7242_read_reg(device, args.read_reg)))
if args.write_reg:
adf7242_write_reg(device, args.write_reg[0], args.write_reg[1])
if args.command:
adf7242_command(device, args.command)
if args.status:
print('Status: {:02x}'.format(adf7242_status(device)))
if args.temperature:
temp = adf7242_temperature(device)
temp_f = temp * 9 / 5 + 32
print('Temperature: {:0.1f} °F / {:.01f} °C'.format(temp_f, temp))
def main():
logfile = 'log.bin'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(
description="Logic analyzer implementation for GreatFET")
parser.add_argument('-s',
dest='serial',
metavar='<serialnumber>',
type=str,
help="Serial number of device, if multiple devices",
default=None)
parser.add_argument('-f',
dest='filename',
metavar='<filename>',
type=str,
help="Write data to file",
default=logfile)
parser.add_argument('-v',
dest='verbose',
action='store_true',
help="Write data from file")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(
device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(
args.serial),
file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
device.vendor_request_out(vendor_requests.LOGIC_ANALYZER_START)
time.sleep(1)
f = open(args.filename, 'wb')
try:
while True:
d = device.device.read(0x81, 16384, 1000)
f.write(d)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.LOGIC_ANALYZER_STOP)
def main():
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for flashing the GreatFET's onboard SPI flash")
parser.add_argument('-i', '--info', dest='info', action='store_true',
help="Read Jedec information from target")
parser.add_argument('-d', '--dump', dest='dump', metavar='<filename>',
type=str, help="Dump flash into file")
parser.add_argument('-a', '--address', metavar='<n>', default=0,
type=int, help="Flash dump starting address")
parser.add_argument('-l', '--length', metavar='<n>', type=int,default=None,
help="number of bytes to read (default: flash size)")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
args = parser.parse_args()
# If we don't have an option, print our usage.
if not args.info and not args.dump:
parser.print_help()
sys.exit()
# Determine whether we're going to log to the stdout, or not at all.
log_function = log_verbose if args.verbose else log_silent
# Create our GreatFET connection.
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
device.vendor_request_out(vendor_requests.SPI_INIT)
if args.info:
spi_info(device, log_function=log_verbose)
if args.dump:
dump_flash(device, filename=args.dump, address=args.address,
length=args.length, log_function=log_verbose)
def main():
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for flashing the GreatFET's onboard SPI flash")
parser.add_argument('-i', '--info', dest='info', action='store_true',
help="Read Jedec information from target")
parser.add_argument('-d', '--dump', dest='dump', metavar='<filename>',
type=str, help="Dump flash into file")
parser.add_argument('-a', '--address', metavar='<n>', default=0,
type=int, help="Flash dump starting address")
parser.add_argument('-l', '--length', metavar='<n>', type=int,default=None,
help="number of bytes to read (default: flash size)")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
args = parser.parse_args()
# If we don't have an option, print our usage.
if not args.info and not args.dump:
parser.print_help()
sys.exit()
# Determine whether we're going to log to the stdout, or not at all.
log_function = log_verbose if args.verbose else log_silent
# Create our GreatFET connection.
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
device.vendor_request_out(vendor_requests.SPI_INIT)
if args.info:
spi_info(device, log_function=log_verbose)
if args.dump:
dump_flash(device, filename=args.dump, address=args.address,
length=args.length, log_function=log_verbose)
def main():
# Set up a simple argument parser.
parser = argparse.ArgumentParser(
description="Utility for flashing the GreatFET's onboard SPI flash")
parser.add_argument('-s',
dest='serial',
metavar='<serialnumber>',
type=str,
help="Serial number of device, if multiple devices",
default=None)
parser.add_argument('-v',
dest='verbose',
action='store_true',
help="Write data from file")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(
device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(
args.serial),
file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
# 0 - 1024
dac_value = 1024
device.vendor_request_out(vendor_requests.DAC_SET, value=dac_value)
print("DAC value set to", dac_value)
def main():
logfile = 'log.bin'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for flashing the GreatFET's onboard SPI flash")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-f', dest='filename', metavar='<filename>', type=str, help="Write data to file", default=logfile)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
device.vendor_request_out(vendor_requests.LOGIC_ANALYZER_START)
time.sleep(1)
f = open(args.filename, 'wb')
try:
while True:
d = device.device.read(0x81, 16384, 1000)
f.write(d)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.LOGIC_ANALYZER_STOP)
def main():
logfile = 'log.bin'
# logfile = '/tmp/fifo'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for experimenting with GreatFET's ADC")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-f', dest='filename', metavar='<filename>', type=str, help="Write data to file", default=logfile)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
parser.add_argument('-a', dest='adc', action='store_true', help="Use internal ADC")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
if args.adc:
device.vendor_request_out(vendor_requests.ADC_INIT)
else:
device.vendor_request_out(vendor_requests.SDIR_RX_START)
time.sleep(1)
print(device.device)
with open(args.filename, 'wb') as f:
try:
while True:
d = device.device.read(0x81, 0x4000, 1000)
# print(d)
f.write(d)
except KeyboardInterrupt:
pass
if not args.adc:
device.vendor_request_out(vendor_requests.SDIR_RX_STOP)
def main():
logfile = 'log.bin'
# logfile = '/tmp/fifo'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for experimenting with GreatFET's ADC")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-f', dest='filename', metavar='<filename>', type=str, help="Write data to file", default=logfile)
parser.add_argument('-v', dest='verbose', action='store_true', help="Write data from file")
parser.add_argument('-a', dest='adc', action='store_true', help="Use internal ADC")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
if args.adc:
device.vendor_request_out(vendor_requests.ADC_INIT)
else:
device.vendor_request_out(vendor_requests.SDIR_RX_START)
time.sleep(1)
print(device.device)
with open(args.filename, 'wb') as f:
try:
while True:
d = device.device.read(0x81, 0x4000, 1000)
# print(d)
f.write(d)
except KeyboardInterrupt:
pass
if not args.adc:
device.vendor_request_out(vendor_requests.SDIR_RX_STOP)
def main():
logfile = 'log.bin'
# logfile = '/tmp/fifo'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(description="Utility for experimenting with GreatFET's ADC")
parser.add_argument('-s', dest='serial', metavar='<serialnumber>', type=str,
help="Serial number of device, if multiple devices", default=None)
parser.add_argument('-S', dest='samplerate', metavar='<samplerate>', type=int,
help="Sample rate for IR Tx", default=1000000)
parser.add_argument('-f', dest='filename', metavar='<filename>', type=str, help="File to read or write", default=logfile)
parser.add_argument('-r', dest='receive', action='store_true', help="Write data to file")
parser.add_argument('-R', dest='repeat', action='store_true', help="Repeat file data (tx only)")
parser.add_argument('-v', dest='verbose', action='store_true', help="Increase verbosity of logging")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(args.serial), file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
if args.receive:
device.vendor_request_out(vendor_requests.SDIR_RX_START)
time.sleep(1)
with open(args.filename, 'wb') as f:
try:
while True:
d = device.device.read(0x81, 0x4000, 1000)
# print(d)
f.write(d)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.SDIR_RX_STOP)
else:
index = args.samplerate & 0xFFFF
value = (args.samplerate >> 16) & 0xFFFF
device.vendor_request_out(vendor_requests.SDIR_TX_START, value=value, index=index)
time.sleep(1)
with open(args.filename, 'rb') as f:
try:
while True:
data = f.read(0x4000)
if len(data) != 0x4000:
if args.repeat:
print("End of file reached. Looping")
f.seek(0,0)
else:
break
if len(data) == 0:
data = f.read(0x4000)
# print(data[:10])
device.device.write(0x02, data)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.SDIR_TX_STOP)
# GND -> GND
# VBUS -> VCC
# SCK -> CKI
# MOSI -> SDI
from greatfet import GreatFET
from greatfet.protocol import vendor_requests
import bitstring
import time
import math
start_frame = bitstring.Bits('0x00000000')
end_frame = bitstring.Bits('0xffffffff')
gf = GreatFET()
gf.vendor_request_out(vendor_requests.SPI_INIT)
def led_frame(red=0, green=0, blue=0, brightness=0x1f):
frame = bitstring.Bits(length=3, uint=0x7)
frame += bitstring.Bits(length=5, uint=(brightness & 0x1f))
frame += bitstring.Bits(length=8, uint=(blue & 0xff))
frame += bitstring.Bits(length=8, uint=(green & 0xff))
frame += bitstring.Bits(length=8, uint=(red & 0xff))
return frame
def set2pixels(red1=0, blue1=0, green1=0, red2=0, blue2=0, green2=0):
data = start_frame
data += led_frame(red1, blue1, green1)
data += led_frame(red2, blue2, green2)
import sys
import greatfet
from greatfet import GreatFET
from greatfet.protocol import vendor_requests
if __name__ == '__main__':
device = GreatFET()
if not device:
print('No GreatFET devices found!')
sys.exit()
# Print the board's information...
print("Found a {}!".format(device.board_name()))
print(" Board ID: {}".format(device.board_id()))
print(" Firmware version: {}".format(device.firmware_version()))
print(" Part ID: {}".format(device.part_id()))
print(" Serial number: {}".format(device.serial_number()))
# ... and toggle it's third LED, for fun.
device.vendor_request_out(vendor_requests.LED_TOGGLE, 3)
# Dev note: you can still easily use this to test low-level interfaces.
# For example, to send the ENABLE_USB1 request, use:
#
# device.vendor_request_out(vendor_requests.ENABLE_USB1)
#
# where ENABLE_USB1 is just an integer constant.
def main():
logfile = 'log.bin'
# logfile = '/tmp/fifo'
# Set up a simple argument parser.
parser = argparse.ArgumentParser(
description="Utility for experimenting with GreatFET's ADC")
parser.add_argument('-s',
dest='serial',
metavar='<serialnumber>',
type=str,
help="Serial number of device, if multiple devices",
default=None)
parser.add_argument('-S',
dest='samplerate',
metavar='<samplerate>',
type=int,
help="Sample rate for IR Tx",
default=1000000)
parser.add_argument('-f',
dest='filename',
metavar='<filename>',
type=str,
help="File to read or write",
default=logfile)
parser.add_argument('-r',
dest='receive',
action='store_true',
help="Write data to file")
parser.add_argument('-R',
dest='repeat',
action='store_true',
help="Repeat file data (tx only)")
parser.add_argument('-v',
dest='verbose',
action='store_true',
help="Increase verbosity of logging")
args = parser.parse_args()
log_function = log_verbose if args.verbose else log_silent
try:
log_function("Trying to find a GreatFET device...")
device = GreatFET(serial_number=args.serial)
log_function("{} found. (Serial number: {})".format(
device.board_name(), device.serial_number()))
except greatfet.errors.DeviceNotFoundError:
if args.serial:
print("No GreatFET board found matching serial '{}'.".format(
args.serial),
file=sys.stderr)
else:
print("No GreatFET board found!", file=sys.stderr)
sys.exit(errno.ENODEV)
if args.receive:
device.vendor_request_out(vendor_requests.SDIR_RX_START)
time.sleep(1)
with open(args.filename, 'wb') as f:
try:
while True:
d = device.device.read(0x81, 0x4000, 1000)
# print(d)
f.write(d)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.SDIR_RX_STOP)
else:
index = args.samplerate & 0xFFFF
value = (args.samplerate >> 16) & 0xFFFF
device.vendor_request_out(vendor_requests.SDIR_TX_START,
value=value,
index=index)
time.sleep(1)
with open(args.filename, 'rb') as f:
try:
while True:
data = f.read(0x4000)
if len(data) != 0x4000:
if args.repeat:
print("End of file reached. Looping")
f.seek(0, 0)
else:
break
if len(data) == 0:
data = f.read(0x4000)
# print(data[:10])
device.device.write(0x02, data)
except KeyboardInterrupt:
pass
device.vendor_request_out(vendor_requests.SDIR_TX_STOP)