示例#1
0
    def handleStop(self):
        self.runButton.setEnabled(True)
        log.close()
        thm.close(self.thm1)
        thm.close(self.thm2)
        heater.close(self.pwm_1)
        heater.close(self.pwm_2)

        coefficients_center = self.pid_center.getPID()
        coefficients_edge = self.pid_edge.getPID()

        log.createPlot(self.times, self.cent_temps, self.edge_temps,
                       self.heat_time, coefficients_center, coefficients_edge,
                       self.pid_center_val, self.pid_edge_val, self)
        sys.exit()
示例#2
0
    def handleStop(self):
        self.runButton.setEnabled(True)
        self.stopButton.setEnabled(False)
        log.close()
        thm.close(self.thm1)
        thm.close(self.thm2)
        heater.close(self.pwm_1)
        heater.close(self.pwm_2)

        coefficients_center = self.pid_center.getPID()
        coefficients_edge = self.pid_edge.getPID()

        self.outputMessage.append(
            "\nThe process has finished. Please ensure everything is turned off."
        )
        self.outputMessage.update()
        QCoreApplication.processEvents()
        log.createPlot(self.times, self.cent_temps, self.edge_temps,
                       self.heat_time, coefficients_center, coefficients_edge,
                       self.pid_center_val, self.pid_edge_val, self)
示例#3
0
    def handleStop(self):

        #Stop the temperature measruement
        self.process.measuring = False
        self.runButton.setEnabled(True)
        self.stopButton.setEnabled(False)

        #Close the thermocouples, the heaters, and the data log
        if (self.process.mode == 'Heating mode'):
            thm.close(self.process.thm1)
            thm.close(self.process.thm2)
            heater.close(self.process.pwm_1)
            heater.close(self.process.pwm_2)

            self.process.coefficients_center = self.process.pid_center.getPID()
            self.process.coefficients_edge = self.process.pid_edge.getPID()
            '''
            self.outputMessage.append("\nThe process has finished. Please ensure everything is turned off.")
            self.outputMessage.update()
            QCoreApplication.processEvents()
            '''
            self.generateMessageBox(
                "REMINDER",
                "The process has finished. Please ENSURE that EVERYTHING has been TURNED OFF."
            )

            self.process.dataLog.createPlot(self)

            self.process.dataLog.close()
        else:
            thm.close(self.process.thm1)
            thm.close(self.process.thm2)
            self.generateMessageBox(
                "REMINDER",
                "The process has finished. Please ENSURE that EVERYTHING has been TURNED OFF."
            )

            self.process.dataLog.createPlotTemp(self)

            self.process.dataLog.close()
示例#4
0
    def handleRun(self):
        '''
        statusTemp = self.checkTemp()
        if(statusTemp == "enter a temperature"):
            self.generateMessageBox("Enter Temperature", "Please enter a temperature value")
        elif(statusTemp == "temperature too high"):
            self.generateMessageBox("Temperature too high", "The temperature value entered is too high. Please enter a value below 200.")
        elif(statusTemp == "invalid temperature"):
            self.generateMessageBox("Invalid temperature", "Please enter a valid temperature")
        elif(statusTemp  == "valid temperature"):
            statusP_center = self.checkP("center")
            statusI_center = self.checkI("center")
            statusD_center = self.checkD("center")

            statusP_edge = self.checkP("edge")
            statusI_edge = self.checkI("edge")
            statusD_edge = self.checkD("edge")

            if(statusP_center == "invalid P"):
                self.generateMessageBox("Invalid center P", "The center P value entered is invalid. Please enter a valid value")
            elif(statusP_center == "enter a P"):
                self.generateMessageBox("Enter center P value", "Please enter a center P value.")

            if(statusI_center == "invalid I"):
                self.generateMessageBox("Invalid center I", "The center I value entered is invalid. Please enter a valid value")
            elif(statusI_center == "enter a I"):
                self.generateMessageBox("Enter center I value", "Please enter a center I value.")

            if(statusD_center == "invalid D"):
                self.generateMessageBox("Invalid D", "The center D value entered is invalid. Please enter a valid value")
            elif(statusD_center == "enter a D"):
                self.generateMessageBox("Enter center D value", "Please enter a center D value.")


            if(statusP_edge == "invalid P"):
                self.generateMessageBox("Invalid edge P", "The edge P value entered is invalid. Please enter a valid value")
            elif(statusP_edge == "enter a P"):
                self.generateMessageBox("Enter edge P value", "Please enter an edge P value.")

            if(statusI_edge == "invalid I"):
                self.generateMessageBox("Invalid edge I", "The edge I value entered is invalid. Please enter a valid value")
            elif(statusI_edge == "enter a I"):
                self.generateMessageBox("Enter edge I value", "Please enter an edge I value.")

            if(statusD_edge == "invalid D"):
                self.generateMessageBox("Invalid D", "The edge D value entered is invalid. Please enter a valid value")
            elif(statusD_edge == "enter a D"):
                self.generateMessageBox("Enter edge D value", "Please enter an edge D value.")

            if(statusP_center == "valid P" and statusI_center == "valid I" and statusD_center == "valid D"):
                center_Valid = True
            else:
                center_Valid = False

            if (statusP_edge == "valid P" and statusI_edge == "valid I" and statusD_edge == "valid D"):
                edge_Valid = True
            else:
                edge_Valid = False

            if(center_Valid == True and edge_Valid == True):
                self.temp = float(self.tempEdit.text())
                self.P_center = float(self.pEdit_center.text())
                self.I_center = float(self.iEdit_center.text())
                self.D_center = float(self.dEdit_center.text())
                self.P_edge = float(self.pEdit_edge.text())
                self.I_edge = float(self.iEdit_edge.text())
                self.D_edge = float(self.dEdit_edge.text())
            '''

        inputStatus = self.checkInput()

        if (inputStatus == True):
            self.data_log_freq = 1

            # The PWM duty used for the initial heating. Generally around 50% for the
            # center and 100% for the edge seems to work. Should be adjusted based on
            # changes to the thermal volume based on empirical results.
            self.pwm_center = 40
            self.pwm_edge = 100

            # Used to suppress Kp as it approaches the setpoint.
            self.limited_kp = 1  # heater.calc_kp(work_temp)

            self.limited_kd = -0.2

            # Time to wait after initial heating for temp to settle
            self.wait_time = 30

            ################################################################################
            ''' DON'T EDIT THESE UNLESS YOU KNOW WHAT YOU'RE DOING '''

            self.log.setup("PID_cartridge_test")

            self.thm1 = thm.setup1()
            self.thm2 = thm.setup2()

            self.pwm_1 = heater.setup1()
            self.pwm_2 = heater.setup2()

            self.pid_edge = pid_setup.pid_setup_edge(self.temp, self.P_edge,
                                                     self.I_edge, self.D_edge)
            self.pid_center = pid_setup.pid_setup_center(
                self.temp, self.P_center, self.I_center, self.D_center)

            self.pid_edge_val = self.pid_edge.getPID()
            self.pid_center_val = self.pid_center.getPID()

            # These variables will have current temp values written to them.
            self.t_center = thm.read(self.thm1)
            self.t_edge = thm.read(self.thm2)

            # These variables store the temperature averaged over the last two values.
            self.t_center_avg = self.t_center
            self.t_edge_avg = self.t_edge

            # Variables used for timekeeping and data plotting.
            self.start_t = time.time()
            self.curr_t = time.time()

            self.times = []
            self.cent_temps = []
            self.edge_temps = []

            self.outputMessage.append("Setup completed, initial heating  ... ")
            self.runButton.setEnabled(False)

            # change
            try:
                # Function stored in heater.py. Algorithm based on empirical results.
                self.heat_time = heater.initial_heating_time(
                    self.t_center, self.t_edge, self.temp, self.thm1,
                    self.thm2)
                heater.change_duty(self.pwm_center, self.pwm_edge, self.pwm_1,
                                   self.pwm_2)
                # This is the initial heating.
                while ((time.time() - self.start_t) < self.heat_time):
                    if ((time.time() - self.curr_t) >= self.data_log_freq):
                        self.t_center = thm.read(self.thm1)
                        self.t_edge = thm.read(self.thm2)

                        self.curr_t = time.time()
                        log.write_line_to_log(self.t_center, self.t_edge,
                                              self.pwm_center, self.pwm_edge,
                                              self.curr_t, self.start_t,
                                              self.cent_temps, self.edge_temps,
                                              self.times, self)

                # Update PWM values to zero.
                self.pwm_center = 0
                self.pwm_edge = 0
                heater.change_duty(self.pwm_center, self.pwm_edge, self.pwm_1,
                                   self.pwm_2)

                print('Initial heating finished...')
                log.write('LINE', round((time.time() - self.start_t), 2),
                          'Initial heating finished at: ')

                self.pid_start_t = time.time()

                # Wait for the temperature to settle.
                while ((time.time() - self.pid_start_t) < self.wait_time):
                    if ((time.time() - self.curr_t) >= self.data_log_freq):
                        self.t_center = thm.read(self.thm1)
                        self.t_edge = thm.read(self.thm2)

                        self.curr_t = time.time()
                        log.write_line_to_log(self.t_center, self.t_edge,
                                              self.pwm_center, self.pwm_edge,
                                              self.curr_t, self.start_t,
                                              self.cent_temps, self.edge_temps,
                                              self.times, self)

                print('PID controller started ...')
                log.write('LINE', round((time.time() - self.start_t), 2),
                          'PID Controller started at: ')

                working = True
                limited = [[False, False], [False, False]]

                while working:
                    self.t_center_last = self.t_center
                    self.t_edge_last = self.t_edge
                    self.t_center = thm.read(self.thm1)
                    self.t_edge = thm.read(self.thm2)

                    if ((time.time() - self.curr_t) >= self.data_log_freq):
                        self.curr_t = time.time()
                        log.write_line_to_log(self.t_center, self.t_edge,
                                              self.pwm_center, self.pwm_edge,
                                              self.curr_t, self.start_t,
                                              self.cent_temps, self.edge_temps,
                                              self.times, self)

                    self.t_center_avg = (self.t_center +
                                         self.t_center_last) / 2.0
                    self.t_edge_avg = (self.t_edge + self.t_edge_last) / 2.0

                    self.pid_center.update(self.t_center_avg)
                    self.pwm_center = self.pid_center.output
                    self.pwm_center = heater.clamp(self.pwm_center, 0, 100)

                    self.pid_edge.update(self.t_edge_avg)
                    self.pwm_edge = self.pid_edge.output
                    self.pwm_edge = heater.clamp(self.pwm_edge, 0, 100)

                    heater.change_duty(self.pwm_center, self.pwm_edge,
                                       self.pwm_1, self.pwm_2)

                    # Suppress Kp once the current temp nears the working temp.
                    if ((limited[0][0] == False)
                            and ((self.temp - self.t_center_avg) < 15)):
                        print("Kp center suppressed ... ")
                        log.write('LINE', 0, 'Kp center suppressed')
                        self.pid_center.setKp(self.limited_kp)
                        limited[0][0] = True

                    if ((limited[1][0] == False)
                            and ((self.temp - self.t_edge_avg) < 15)):
                        print("Kp edge suppressed ... ")
                        log.write('LINE', 0, 'Kp edge suppressed')
                        self.pid_edge.setKp(self.limited_kp)
                        limited[1][0] = True

                    if ((limited[0][1] == False)
                            and ((self.temp - self.t_center_avg) < 1)):
                        print("Kd center suppressed ... ")
                        log.write('LINE', 0, 'Kd center suppressed')
                        self.pid_center.setKd(self.limited_kd)
                        limited[0][1] = True

                    if ((limited[1][1] == False)
                            and ((self.temp - self.t_edge_avg) < 1)):
                        print("Kd edge suppressed ... ")
                        log.write('LINE', 0, 'Kd edge suppressed')
                        self.pid_edge.setKd(self.limited_kd)
                        limited[1][1] = True

            except KeyboardInterrupt:
                log.close()
                thm.close(self.thm1)
                thm.close(self.thm2)
                heater.close(self.pwm_1)
                heater.close(self.pwm_2)

                coefficients_center = self.pid_center.getPID()
                coefficients_edge = self.pid_edge.getPID()

                log.createPlot(self.times, self.cent_temps, self.edge_temps,
                               self.heat_time, coefficients_center,
                               coefficients_edge, self.pid_center_val,
                               self.pid_edge_val, self)
                sys.exit()

            except:
                traceback.print_exc()
                log.close()
                thm.close(self.thm1)
                thm.close(self.thm2)
                heater.close(self.pwm_1)
                heater.close(self.pwm_2)

                sys.exit()
示例#5
0
    def handleRun(self):

        if (self.process.mode == "Heating mode"):

            #Check the validity for the inputs for the PID values
            inputStatus = self.checkInput()

            if (inputStatus == True):
                self.outputMessage.clear()
                self.runButton.setEnabled(False)
                self.stopButton.setEnabled(True)
                self.displayMessage("Setup completed, initial heating  ... ")

                # change
                try:
                    self.process.setup()
                    # Function stored in heater.py. Algorithm based on empirical results.
                    self.process.heat_time = heater.initial_heating_time(
                        self.process)
                    heater.change_duty(self.process)

                    # This is the initial heating.
                    while ((time.time() - self.process.start_t) <
                           self.process.heat_time):
                        if ((time.time() - self.process.curr_t) >=
                                self.process.data_log_freq):
                            self.process.t_center = thm.read(self.process.thm1)
                            self.process.t_edge = thm.read(self.process.thm2)

                            self.process.curr_t = time.time()
                            self.process.dataLog.write_line_to_log(self)

                    # Update PWM values to zero.
                    self.process.pwm_center = 0
                    self.process.pwm_edge = 0
                    heater.change_duty(self.process)

                    self.displayMessage('Initial heating finished...')
                    self.process.dataLog.write(
                        'LINE', round((time.time() - self.process.start_t), 2),
                        'Initial heating finished at: ')

                    self.process.pid_start_t = time.time()

                    # Wait for the temperature to settle.
                    while ((time.time() - self.process.pid_start_t) <
                           self.process.wait_time):
                        if ((time.time() - self.process.curr_t) >=
                                self.process.data_log_freq):
                            self.process.t_center = thm.read(self.process.thm1)
                            self.process.t_edge = thm.read(self.process.thm2)

                            self.process.curr_t = time.time()
                            self.process.dataLog.write_line_to_log(self)

                    self.displayMessage('PID controller started ...')
                    self.process.dataLog.write(
                        'LINE', round((time.time() - self.process.start_t), 2),
                        'PID Controller started at: ')

                    working = True
                    limited = [[False, False], [False, False]]

                    while working:
                        self.process.t_center_last = self.process.t_center
                        self.process.t_edge_last = self.process.t_edge
                        self.process.t_center = thm.read(self.process.thm1)
                        self.process.t_edge = thm.read(self.process.thm2)

                        if ((time.time() - self.process.curr_t) >=
                                self.process.data_log_freq):
                            self.process.curr_t = time.time()
                            self.process.dataLog.write_line_to_log(self)

                        self.process.t_center_avg = (
                            self.process.t_center +
                            self.process.t_center_last) / 2.0
                        self.process.t_edge_avg = (
                            self.process.t_edge +
                            self.process.t_edge_last) / 2.0

                        self.process.pid_center.update(
                            self.process.t_center_avg)
                        self.process.pwm_center = self.process.pid_center.output
                        self.process.pwm_center = heater.clamp(
                            self.process.pwm_center, 0, 100)

                        self.process.pid_edge.update(self.process.t_edge_avg)
                        self.process.pwm_edge = self.process.pid_edge.output
                        self.process.pwm_edge = heater.clamp(
                            self.process.pwm_edge, 0, 100)

                        heater.change_duty(self.process)

                        # Suppress Kp once the current temp nears the working temp.
                        if ((limited[0][0] == False) and
                            ((self.process.temp - self.process.t_center_avg) <
                             15)):
                            self.displayMessage("Kp center suppressed ... ")
                            self.process.dataLog.write('LINE', 0,
                                                       'Kp center suppressed')
                            self.process.pid_center.setKp(
                                self.process.limited_kp)
                            limited[0][0] = True

                        if ((limited[1][0] == False) and
                            ((self.process.temp - self.process.t_edge_avg) <
                             15)):
                            self.displayMessage("Kp edge suppressed ... ")
                            self.process.dataLog.write('LINE', 0,
                                                       'Kp edge suppressed')
                            self.process.pid_edge.setKp(
                                self.process.limited_kp)
                            limited[1][0] = True

                        if ((limited[0][1] == False) and
                            ((self.process.temp - self.process.t_center_avg) <
                             1)):
                            self.displayMessage("Kd center suppressed ... ")
                            self.process.dataLog.write('LINE', 0,
                                                       'Kd center suppressed')
                            self.process.pid_center.setKd(
                                self.process.limited_kd)
                            limited[0][1] = True

                        if ((limited[1][1] == False) and
                            ((self.process.temp - self.process.t_edge_avg) <
                             1)):
                            self.displayMessage(("Kd edge suppressed ... "))
                            self.process.dataLog.write('LINE', 0,
                                                       'Kd edge suppressed')
                            self.process.pid_edge.setKd(
                                self.process.limited_kd)
                            limited[1][1] = True

                        # change
                        if (time.time() - self.process.start_t >= 1000):
                            working = False

                except KeyboardInterrupt:
                    self.process.dataLog.close()
                    thm.close(self.process.thm1)
                    thm.close(self.process.thm2)
                    heater.close(self.process.pwm_1)
                    heater.close(self.process.pwm_2)

                    self.process.coefficients_center = self.process.pid_center.getPID(
                    )
                    self.process.coefficients_edge = self.process.pid_edge.getPID(
                    )

                    self.process.dataLog.createPlot(self)
                    sys.exit()

                except:
                    traceback.print_exc()
                    self.process.dataLog.close()
                    thm.close(self.process.thm1)
                    thm.close(self.process.thm2)
                    heater.close(self.process.pwm_1)
                    heater.close(self.process.pwm_2)
                    sys.exit()

        else:
            #This is for the temperature mode
            self.outputMessage.clear()
            self.process.measuring = True
            self.runTemperatureMeasurement()