def test1():
try:
scope.lock()
scope.write("*rst")
#vxi_11.vxi_11_connection.abort(scope)
print scope.core.port, scope.abort_channel.port, scope.idn
grablen = 512
loops = 1
averages = 16
mode = "real"
timerange = 1e-5
if mode == "rep":
scope.average_mode(averages)
else:
scope.realtime_mode(grablen)
if 1: #do setup, which should always be done if the scope has been unlocked, since someone else might have used it.
scope.set_edge_trigger(2,
level=0,
slope=-1,
auto_trigger=1,
coupling=scope.ac)
scope.set_timebase(range=timerange)
scope.set_channel(2,
range=5,
offset=2.5,
coupling=scope.dc,
lowpass=0,
impedance=None)
scope.set_channel(3,
range=0.1,
offset=0,
coupling=scope.dc,
lowpass=0,
impedance=None)
sum = None
for i in range(loops):
scope.digitize((2, 3))
scope.wait_for_done(sleep=0.1, max_loops=100)
waveform = Numeric.array(scope.get_current_data((2, 3)))
if sum is None:
sum = waveform
else:
sum += waveform
print i
sum *= (1.0 / loops)
scope.unlock()
g = graphite.Graph()
g.formats = [dots(graphite.green), dots(graphite.red)]
axis = g.axes[graphite.X]
tick = axis.tickMarks[0]
tick.labels = "%.2g"
axis.label.text = "μSeconds"
#tick.spacing = 0.05
#axis.range=[-tick.spacing,plottime]
axis.label.points[0] = (0., -0.1, 0.) #move label closer to axis
axis = g.axes[graphite.Y]
tick = axis.tickMarks[0]
tick.labels = "%+.3f"
axis.label.text = "Volts"
tick.inextent = 0.02
tick.labelStyle = graphite.TextStyle(
hjust=graphite.RIGHT,
vjust=graphite.CENTER,
font=graphite.Font(10, 0, 0, 0, None),
color=graphite.Color(0.00, 0.00, 0.00))
tick.labeldist = -0.01
axis.label.points[0] = (-0.07, 0, 0.) #move label closer to axis
g.top = 25
g.bottom = g.top + 400
g.left = 100
g.right = g.left + 600
d = graphite.Dataset()
d.x = scope.xaxis * 1e6
d.y = sum[0]
g.datasets.append(d)
d = graphite.Dataset()
d.x = scope.xaxis * 1e6
d.y = sum[1]
g.datasets.append(d)
graphite.genOutput(g, 'QD', canvasname="Scope data", size=(800, 500))
#graphite.genOutput(g,'PDF',canvasname="Scope_data", size=(800,500))
except:
scope.unlock_completely()
scope.abort()
traceback.print_exc()
def test1():
try:
scope.lock()
# scope.write("*rst")
# vxi_11.vxi_11_connection.abort(scope)
print scope.core.port, scope.abort_channel.port, scope.idn
#scope.set_edge_trigger(1, level=0.10, slope=1, auto_trigger=0, coupling=scope.dc)
scope.set_edge_trigger(4,
level=0.9,
slope=1,
auto_trigger=0,
coupling=scope.dc)
scope.set_channel(1,
range=1,
offset=0,
coupling=scope.ac,
atten=10.0,
lowpass=0,
impedance=None)
scope.set_channel(2,
range=5,
offset=0,
coupling=scope.dc,
atten=1.0,
lowpass=0,
impedance=None)
scope.set_channel(3,
range=1,
offset=1.2,
coupling=scope.dc,
atten=10.0,
lowpass=1,
impedance=None)
scope.set_channel(4,
range=1,
offset=0.4,
coupling=scope.dc,
atten=1.0,
lowpass=0,
impedance=50)
scope.end_sequential_mode()
plotqd = 1
plotpdf = 0
xrange = None
channels = (1, 2, 3)
if 0: # plot one really slow plot
grablen = 8192
timerange = 1e-2
loops = 1
plotskip = 1
scope.realtime_mode(grablen)
scope.set_timebase(range=timerange,
reference=scope.left,
delay=-2e-8)
#timescale=1e6; timename="μSeconds"
timescale = 1e3
timename = "milliSeconds"
#timescale=1e9; timename="nanoSeconds"
# xrange=[-20,60]
channels = (2, 3)
if 1:
timerange = 2e-7
loops = 1
plotskip = 1
scope.sequential_mode(npoints=80, nsegments=50)
scope.set_timebase(range=timerange,
reference=scope.left,
delay=770e-9)
timescale = 1e9
timename = "nanoSeconds"
channels = (1, 2)
plotqd = 1
plotpdf = 1
if 0:
grablen = 512
timerange = 1e-7
loops = 1
plotskip = 1
scope.realtime_mode(grablen)
scope.set_timebase(range=timerange,
reference=scope.left,
delay=-2e-7)
#timescale=1e6; timename="μSeconds"
timescale = 1e9
timename = "nanoSeconds"
# xrange=[-50,60]
channels = (1, 2, 3, 4)
if 0:
timerange = 2e-7
loops = 1
plotskip = 1
scope.sequential_mode(npoints=50, nsegments=1000)
scope.set_timebase(range=timerange,
reference=scope.left,
delay=-2e-9)
timescale = 1e9
timename = "nanoSeconds"
plotqd = 0
plotpdf = 0
if 0:
timerange = 1e-7
loops = 1
plotskip = 1
scope.set_timebase(range=timerange,
reference=scope.left,
delay=-2e-9)
scope.average_mode(16)
xrange = [-20, 60]
timescale = 1e9
timename = "nanoSeconds"
sum = None
for i in range(loops):
scope.digitize(channels)
scope.wait_for_done(sleep=0.1, max_loops=1000)
waveform = Numeric.array(scope.get_current_data(channels))
if sum is None:
sum = waveform
else:
sum += waveform
try:
# if we have tags, print them as multiples of 1/480 second
times = (scope.get_time_tags() * 480 + 0.5).astype(Numeric.Int)
oops = Numeric.nonzero((times[1:] - times[:-1]) - 1)
print oops
print oops[1:] - oops[:-1]
ranges = []
np = scope.preamble["POINTS"]
for i in oops:
ranges += range((i - 5) * np, (i + 5) * np)
sum = Numeric.take(sum, ranges, -1)
scope.xaxis = Numeric.take(scope.xaxis, ranges, -1)
except exceptions.AssertionError:
pass
sum *= (1.0 / loops)
scope.unlock()
if plotqd or plotpdf:
g = graphite.Graph()
axis = g.axes[graphite.X]
tick = axis.tickMarks[0]
tick.labels = "%.0f"
scope.xaxis *= timescale
axis.label.text = timename
#tick.spacing = 0.05
if xrange is not None:
axis.range = xrange
axis.label.points[0] = (0., -0.1, 0.) # move label closer to axis
axis = g.axes[graphite.Y]
tick = axis.tickMarks[0]
tick.labels = "%+.3f"
axis.label.text = "Volts"
tick.inextent = 0.02
tick.labelStyle = graphite.TextStyle(
hjust=graphite.RIGHT,
vjust=graphite.CENTER,
font=graphite.Font(10, 0, 0, 0, None),
color=graphite.Color(0.00, 0.00, 0.00))
tick.labeldist = -0.01
axis.label.points[0] = (-0.07, 0, 0.) # move label closer to axis
g.top = 25
g.bottom = g.top + 400
g.left = 100
g.right = g.left + 600
for row in sum:
d = graphite.Dataset()
d.x = scope.xaxis[::plotskip]
d.y = row[::plotskip]
g.datasets.append(d)
if plotqd:
g.formats = [
dots(graphite.green),
dots(graphite.red),
dots(graphite.blue),
dots(graphite.orange)
]
graphite.genOutput(g,
'QD',
canvasname="Scope data",
size=(800, 500))
if plotpdf:
g.formats = [
lines(graphite.green),
lines(graphite.red),
lines(graphite.blue),
lines(graphite.orange)
]
graphite.genOutput(g,
'PDF',
canvasname="Scope_data",
size=(800, 500))
except:
scope.clear()
scope.unlock_completely()
scope.abort()
traceback.print_exc()
def test1():
try:
scope.lock()
# scope.write("*rst")
# vxi_11.vxi_11_connection.abort(scope)
print scope.core.port, scope.abort_channel.port, scope.idn
# scope.set_edge_trigger(1, level=0.10, slope=1, auto_trigger=0, coupling=scope.dc)
scope.set_edge_trigger(4, level=0.9, slope=1, auto_trigger=0, coupling=scope.dc)
scope.set_channel(1, range=1, offset=0, coupling=scope.ac, atten=10.0, lowpass=0, impedance=None)
scope.set_channel(2, range=5, offset=0, coupling=scope.dc, atten=1.0, lowpass=0, impedance=None)
scope.set_channel(3, range=1, offset=1.2, coupling=scope.dc, atten=10.0, lowpass=1, impedance=None)
scope.set_channel(4, range=1, offset=0.4, coupling=scope.dc, atten=1.0, lowpass=0, impedance=50)
scope.end_sequential_mode()
plotqd = 1
plotpdf = 0
xrange = None
channels = (1, 2, 3)
if 0: # plot one really slow plot
grablen = 8192
timerange = 1e-2
loops = 1
plotskip = 1
scope.realtime_mode(grablen)
scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-8)
# timescale=1e6; timename="μSeconds"
timescale = 1e3
timename = "milliSeconds"
# timescale=1e9; timename="nanoSeconds"
# xrange=[-20,60]
channels = (2, 3)
if 1:
timerange = 2e-7
loops = 1
plotskip = 1
scope.sequential_mode(npoints=80, nsegments=50)
scope.set_timebase(range=timerange, reference=scope.left, delay=770e-9)
timescale = 1e9
timename = "nanoSeconds"
channels = (1, 2)
plotqd = 1
plotpdf = 1
if 0:
grablen = 512
timerange = 1e-7
loops = 1
plotskip = 1
scope.realtime_mode(grablen)
scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-7)
# timescale=1e6; timename="μSeconds"
timescale = 1e9
timename = "nanoSeconds"
# xrange=[-50,60]
channels = (1, 2, 3, 4)
if 0:
timerange = 2e-7
loops = 1
plotskip = 1
scope.sequential_mode(npoints=50, nsegments=1000)
scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-9)
timescale = 1e9
timename = "nanoSeconds"
plotqd = 0
plotpdf = 0
if 0:
timerange = 1e-7
loops = 1
plotskip = 1
scope.set_timebase(range=timerange, reference=scope.left, delay=-2e-9)
scope.average_mode(16)
xrange = [-20, 60]
timescale = 1e9
timename = "nanoSeconds"
sum = None
for i in range(loops):
scope.digitize(channels)
scope.wait_for_done(sleep=0.1, max_loops=1000)
waveform = Numeric.array(scope.get_current_data(channels))
if sum is None:
sum = waveform
else:
sum += waveform
try:
times = (scope.get_time_tags() * 480 + 0.5).astype(
Numeric.Int
) # if we have tags, print them as multiples of 1/480 second
oops = Numeric.nonzero((times[1:] - times[:-1]) - 1)
print oops
print oops[1:] - oops[:-1]
ranges = []
np = scope.preamble["POINTS"]
for i in oops:
ranges += range((i - 5) * np, (i + 5) * np)
sum = Numeric.take(sum, ranges, -1)
scope.xaxis = Numeric.take(scope.xaxis, ranges, -1)
except exceptions.AssertionError:
pass
sum *= 1.0 / loops
scope.unlock()
if plotqd or plotpdf:
g = graphite.Graph()
axis = g.axes[graphite.X]
tick = axis.tickMarks[0]
tick.labels = "%.0f"
scope.xaxis *= timescale
axis.label.text = timename
# tick.spacing = 0.05
if xrange is not None:
axis.range = xrange
axis.label.points[0] = (0.0, -0.1, 0.0) # move label closer to axis
axis = g.axes[graphite.Y]
tick = axis.tickMarks[0]
tick.labels = "%+.3f"
axis.label.text = "Volts"
tick.inextent = 0.02
tick.labelStyle = graphite.TextStyle(
hjust=graphite.RIGHT,
vjust=graphite.CENTER,
font=graphite.Font(10, 0, 0, 0, None),
color=graphite.Color(0.00, 0.00, 0.00),
)
tick.labeldist = -0.01
axis.label.points[0] = (-0.07, 0, 0.0) # move label closer to axis
g.top = 25
g.bottom = g.top + 400
g.left = 100
g.right = g.left + 600
for row in sum:
d = graphite.Dataset()
d.x = scope.xaxis[::plotskip]
d.y = row[::plotskip]
g.datasets.append(d)
if plotqd:
g.formats = [dots(graphite.green), dots(graphite.red), dots(graphite.blue), dots(graphite.orange)]
graphite.genOutput(g, "QD", canvasname="Scope data", size=(800, 500))
if plotpdf:
g.formats = [lines(graphite.green), lines(graphite.red), lines(graphite.blue), lines(graphite.orange)]
graphite.genOutput(g, "PDF", canvasname="Scope_data", size=(800, 500))
except:
scope.clear()
scope.unlock_completely()
scope.abort()
traceback.print_exc()
def test1():
try:
scope.lock()
scope.write("*rst")
#vxi_11.vxi_11_connection.abort(scope)
print scope.core.port, scope.abort_channel.port, scope.idn
grablen=512; loops=1; averages=16; mode="real"; timerange=1e-5
if mode=="rep":
scope.average_mode(averages)
else:
scope.realtime_mode(grablen)
if 1: #do setup, which should always be done if the scope has been unlocked, since someone else might have used it.
scope.set_edge_trigger(2, level=0, slope=-1, auto_trigger=1, coupling=scope.ac)
scope.set_timebase(range=timerange)
scope.set_channel(2, range=5, offset=2.5, coupling=scope.dc, lowpass=0, impedance=None)
scope.set_channel(3, range=0.1, offset=0, coupling=scope.dc, lowpass=0, impedance=None)
sum=None
for i in range(loops):
scope.digitize((2,3))
scope.wait_for_done(sleep=0.1, max_loops=100)
waveform=Numeric.array( scope.get_current_data((2,3)) )
if sum is None:
sum = waveform
else:
sum += waveform
print i
sum *= (1.0/loops)
scope.unlock()
g=graphite.Graph()
g.formats=[dots(graphite.green), dots(graphite.red)]
axis=g.axes[graphite.X]
tick=axis.tickMarks[0]
tick.labels = "%.2g"
axis.label.text = "μSeconds"
#tick.spacing = 0.05
#axis.range=[-tick.spacing,plottime]
axis.label.points[0]=(0., -0.1, 0.) #move label closer to axis
axis=g.axes[graphite.Y]
tick=axis.tickMarks[0]
tick.labels = "%+.3f"
axis.label.text = "Volts"
tick.inextent= 0.02
tick.labelStyle=graphite.TextStyle(hjust=graphite.RIGHT, vjust=graphite.CENTER,
font=graphite.Font(10,0,0,0,None),
color=graphite.Color(0.00,0.00,0.00))
tick.labeldist=-0.01
axis.label.points[0]=(-0.07, 0, 0.) #move label closer to axis
g.top = 25
g.bottom=g.top+400
g.left=100
g.right=g.left+600
d=graphite.Dataset()
d.x=scope.xaxis*1e6
d.y=sum[0]
g.datasets.append(d)
d=graphite.Dataset()
d.x=scope.xaxis*1e6
d.y=sum[1]
g.datasets.append(d)
graphite.genOutput(g,'QD',canvasname="Scope data", size=(800,500))
#graphite.genOutput(g,'PDF',canvasname="Scope_data", size=(800,500))
except:
scope.unlock_completely()
scope.abort()
traceback.print_exc()