示例#1
0
    def _checkAWOLTasks(self):

        self._logger.debug('Checking AWOL tasks...')

        for task in self._schedModule.getRunningList()[:]:
            if not task.getOnRunningListSince():
                self._logger.warning(
                    "Task %s is in the runningList but has no "
                    "onRunningListSince value! Removing from runningList "
                    "and relaunching..." % (task.id))
                task.tearDown()

                # relaunch it
                self._db_moveTask(task, base.TASK_STATUS_RUNNING,
                                  base.TASK_STATUS_QUEUED)
            else:
                runForSecs = int_timestamp(self._getCurrentDateTime()) - \
                             int_timestamp(task.getOnRunningListSince())

                if runForSecs > task._AWOLThresold:
                    self._logger.warning(
                        "Task %s has been running for %d secs. "
                        "Assuming it has died abnormally and forcibly "
                        "calling its tearDown()..." % (task.id, runForSecs))
                    task.tearDown()

                    self._db_moveTask(task,
                                      base.TASK_STATUS_RUNNING,
                                      base.TASK_STATUS_TERMINATED,
                                      setStatus=True)

                    self._logger.info("Task %s terminated." % (task.id))
示例#2
0
文件: server.py 项目: bubbas/indico
    def _checkAWOLTasks(self):

        self._logger.debug('Checking AWOL tasks...')

        for task in self._schedModule.getRunningList()[:]:
            if not task.getOnRunningListSince():
                self._logger.warning("Task %s is in the runningList but has no "
                               "onRunningListSince value! Removing from runningList "
                               "and relaunching..." % (task.id))
                task.tearDown()

                # relaunch it
                self._db_moveTask(
                    task,
                    base.TASK_STATUS_RUNNING,
                    base.TASK_STATUS_QUEUED)
            else:
                runForSecs = int_timestamp(self._getCurrentDateTime()) - \
                             int_timestamp(task.getOnRunningListSince())

                if runForSecs > task._AWOLThresold:
                    self._logger.warning("Task %s has been running for %d secs. "
                                   "Assuming it has died abnormally and forcibly "
                                   "calling its tearDown()..." % (task.id, runForSecs))
                    task.tearDown()

                    self._db_moveTask(
                        task,
                        base.TASK_STATUS_RUNNING,
                        base.TASK_STATUS_TERMINATED,
                        setStatus=True)

                    self._logger.info("Task %s terminated." % (task.id))
示例#3
0
文件: tasks.py 项目: Ictp/indico
    def run(self):
        sm = SyncManager.getDBInstance()

        logger = self.getLogger()

        # go over all the agents
        for agtName, agent in sm.getAllAgents().iteritems():

            # skip agents if they're not active
            if not agent.isActive():
                logger.warning("Agent '%s' is not active - skipping" % agtName)
                continue

            logger.info("Starting agent '%s'" % agtName)
            try:
                dbi = DBMgr.getInstance()
                # pass the current time and a logger
                result = agent.run(int_timestamp(nowutc()), logger=logger, dbi=dbi, task=self)
            except:
                logger.exception("Problem running agent '%s'" % agtName)
                return

            if result:
                logger.info("Acknowledged successful operation")
                agent.acknowledge()
                dbi.commit()
            else:
                logger.info("'Acknowledge' not done - no records?")
            logger.info("Agent '%s' finished" % agtName)
示例#4
0
    def moveTask(self, task, moveFrom, status, occurrence=None, nocheck=False):
        """
        Move a task somewhere
        """
        if not occurrence:
            occurrence = task

        if not nocheck:
            self._assertTaskStatus(task, moveFrom)

        if moveFrom == base.TASK_STATUS_RUNNING:
            # actually remove it from list
            self.removeRunningTask(task)

        elif moveFrom == base.TASK_STATUS_QUEUED:
            idx_timestamp = int_timestamp(task.getStartOn())
            self._waitingQueue.dequeue(idx_timestamp, task)
        elif moveFrom == base.TASK_STATUS_FAILED:
            self._failedIndex.unindex_obj(task)

        # index it either in finished or failed
        # (or queue it up again)
        if status == base.TASK_STATUS_FINISHED:
            self._finishedIndex.index_obj(occurrence)
        elif status in [base.TASK_STATUS_FAILED,
                        base.TASK_STATUS_TERMINATED]:
            self._failedIndex.index_obj(occurrence)
        elif status == base.TASK_STATUS_QUEUED:
            self.addTaskToWaitingQueue(occurrence)
示例#5
0
    def moveTask(self, task, moveFrom, status, occurrence=None, nocheck=False):
        """
        Move a task somewhere
        """
        if not occurrence:
            occurrence = task

        if not nocheck:
            self._assertTaskStatus(task, moveFrom)

        if moveFrom == base.TASK_STATUS_RUNNING:
            # actually remove it from list
            self.removeRunningTask(task)

        elif moveFrom == base.TASK_STATUS_QUEUED:
            idx_timestamp = int_timestamp(task.getStartOn())
            self._waitingQueue.dequeue(idx_timestamp, task)
        elif moveFrom == base.TASK_STATUS_FAILED:
            self._failedIndex.unindex_obj(task)

        # index it either in finished or failed
        # (or queue it up again)
        if status == base.TASK_STATUS_FINISHED:
            self._finishedIndex.index_obj(occurrence)
        elif status in [base.TASK_STATUS_FAILED,
                        base.TASK_STATUS_TERMINATED]:
            self._failedIndex.index_obj(occurrence)
        elif status == base.TASK_STATUS_QUEUED:
            self.addTaskToWaitingQueue(occurrence)
示例#6
0
文件: tasks.py 项目: arturodr/indico
    def run(self):
        sm = SyncManager.getDBInstance()

        logger = self.getLogger()

        # go over all the agents
        for agtName, agent in sm.getAllAgents().iteritems():

            # skip agents if they're not active
            if not agent.isActive():
                logger.warning("Agent '%s' is not active - skipping" % agtName)
                continue

            logger.info("Starting agent '%s'" % agtName)
            try:
                dbi = DBMgr.getInstance()
                # pass the current time and a logger
                result = agent.run(int_timestamp(nowutc()),
                                   logger=logger,
                                   dbi=dbi)
            except:
                logger.exception("Problem running agent '%s'" % agtName)
                return

            if result:
                logger.info("Acknowledged successful operation")
                agent.acknowledge()
                dbi.commit()
            else:
                logger.info("'Acknowledge' not done - no records?")
            logger.info("Agent '%s' finished" % agtName)
示例#7
0
    def _iterateTasks(self):
        """
        Iterate over all the tasks in the waiting queue, blocking
        in case there are none
        """
        while True:

            currentTimestamp = int_timestamp(self._getCurrentDateTime())

            # this will basically abort the transaction, so, make sure
            # everything important before this was committed
            self._readFromDb()

            # print a status message (only in debug mode)
            self._printStatus(mode='debug')

            # move the tasks in the spool to the waiting queue
            try:
                self._processSpool()
            finally:
                # this `finally` makes sure finished tasks are handled
                # even if a shutdown order is sent

                # process tasks that have finished meanwhile
                # (tasks have been running in different processes, so, the sync
                # thas was done above won't hurt)
                self._checkFinishedTasks()

            # get the next task in queue
            res = self._schedModule.peekNextWaitingTask()

            if res:
                # it's actually a timestamp, task tuple
                nextTS, nextTask = res

                self._logger.debug(
                    (nextTS, currentTimestamp, self._getCurrentDateTime()))

                # if it's time to execute the task
                if (nextTS <= currentTimestamp):
                    yield nextTS, nextTask

                    # don't sleep, jump back to the beginning of the cycle
                    continue

            # we assume the task cycle has been completed (if there was one)
            # so, we can just reset the db status (sync)
            self._readFromDb()

            # we also check AWOL tasks from time to time
            if random.random() < self._config.awol_tasks_check_probability:
                self._checkAWOLTasks()

            # if we get here, we have nothing else to do...
            self._sleep('Nothing to do. Sleeping for %d secs...' %
                        self._config.sleep_interval)

            # read from DB again after sleeping
            self._readFromDb()
示例#8
0
文件: server.py 项目: NIIF/indico
    def _taskCycle(self, timestamp, curTask):

        self._db_setTaskRunning(timestamp, curTask)

        # Start a worker subprocess and add it to the worker dict
        delay = int_timestamp(self._getCurrentDateTime()) - timestamp
        self._runningWorkers[curTask.id] = ProcessWorker(curTask.id, self._config, delay)
        self._runningWorkers[curTask.id].start()
示例#9
0
文件: server.py 项目: bubbas/indico
    def _iterateTasks(self):
        """
        Iterate over all the tasks in the waiting queue, blocking
        in case there are none
        """
        while True:

            currentTimestamp = int_timestamp(self._getCurrentDateTime())

            # this will basically abort the transaction, so, make sure
            # everything important before this was committed
            self._readFromDb()

            # print a status message (only in debug mode)
            self._printStatus(mode = 'debug')

            # move the tasks in the spool to the waiting queue
            try:
                self._processSpool()
            finally:
                # this `finally` makes sure finished tasks are handled
                # even if a shutdown order is sent

                # process tasks that have finished meanwhile
                # (tasks have been running in different threads, so, the sync
                # thas was done above won't hurt)
                self._checkFinishedTasks()

            # get the next task in queue
            res = self._schedModule.peekNextWaitingTask()

            if res:
                # it's actually a timestamp, task tuple
                nextTS, nextTask = res

                self._logger.debug((nextTS, currentTimestamp, self._getCurrentDateTime()))

                # if it's time to execute the task
                if  (nextTS <= currentTimestamp):
                    yield nextTS, nextTask

                    # don't sleep, jump back to the beginning of the cycle
                    continue

            # we assume the task cycle has been completed (if there was one)
            # so, we can just reset the db status (sync)
            self._readFromDb()

            # we also check AWOL tasks from time to time
            if random.random() < self._config.awol_tasks_check_probability:
                self._checkAWOLTasks()

            # if we get here, we have nothing else to do...
            self._sleep('Nothing to do. Sleeping for %d secs...' %
                        self._config.sleep_interval)

            # read from DB again after sleeping
            self._readFromDb()
示例#10
0
    def _taskCycle(self, timestamp, curTask):

        self._db_setTaskRunning(timestamp, curTask)

        # Start a worker subprocess and add it to the worker dict
        delay = int_timestamp(self._getCurrentDateTime()) - timestamp
        self._runningWorkers[curTask.id] = ProcessWorker(
            curTask.id, self._config, delay)
        self._runningWorkers[curTask.id].start()
示例#11
0
    def getVars(self):
        tplVars = WTemplated.getVars(self)

        smanager = SyncManager.getDBInstance()

        tplVars["trackData"], tplVars["lastAgentTS"] = self._calculateTrackData(smanager)
        tplVars["agents"] = smanager.getAllAgents()
        tplVars["currentTS"] = int_timestamp(nowutc())
        tplVars["granularity"] = smanager.getGranularity()

        return tplVars
示例#12
0
    def getVars(self):
        tplVars = WTemplated.getVars(self)

        smanager = SyncManager.getDBInstance()

        tplVars['trackData'], tplVars['lastAgentTS'] = \
                              self._calculateTrackData(smanager)
        tplVars['agents'] = smanager.getAllAgents()
        tplVars['currentTS'] = int_timestamp(nowutc())
        tplVars['granularity'] = smanager.getGranularity()

        return tplVars
示例#13
0
文件: chrome.py 项目: bubbas/indico
    def getVars(self):
        tplVars = WTemplated.getVars(self)

        smanager = SyncManager.getDBInstance()

        tplVars['trackData'], tplVars['lastAgentTS'] = \
                              self._calculateTrackData(smanager)
        tplVars['agents'] = smanager.getAllAgents()
        tplVars['currentTS'] = int_timestamp(nowutc())
        tplVars['granularity'] = smanager.getGranularity()

        return tplVars
示例#14
0
    def prepare(self):
        """
        This information will be saved regardless of the task being repeated or not
        """

        curTime = self._getCurrentDateTime()
        tsDiff = int_timestamp(self.getStartOn()) - int_timestamp(curTime)

        if tsDiff > 0:
            self.getLogger().debug('Task %s will wait for some time. (%s) > (%s)' % \
                                   (self.id, self.getStartOn(), curTime))
            base.TimeSource.get().sleep(tsDiff)

        if self.expiryDate and curTime > self.expiryDate:
            self.getLogger().warning(
                'Task %s will not be executed, expiryDate (%s) < current time (%s)' % \
                (self.id, self.expiryDate, curTime))
            return False

        self.startedOn = curTime
        self.running = True
        self.setStatus(base.TASK_STATUS_RUNNING)
示例#15
0
文件: server.py 项目: bubbas/indico
    def _taskCycle(self, timestamp, curTask):

        self._db_setTaskRunning(timestamp, curTask)

        # Start a worker subprocess
        # Add it to the thread dict

        if self._config.multitask_mode == 'processes':
            wclass = ProcessWorker
        else:
            wclass = ThreadWorker
        delay = int_timestamp(self._getCurrentDateTime()) - timestamp
        self._runningWorkers[curTask.id] = wclass(curTask.id, self._config, delay)
        self._runningWorkers[curTask.id].start()
示例#16
0
    def _taskCycle(self, timestamp, curTask):

        self._db_setTaskRunning(timestamp, curTask)

        # Start a worker subprocess
        # Add it to the thread dict

        if self._config.multitask_mode == 'processes':
            wclass = ProcessWorker
        else:
            wclass = ThreadWorker
        delay = int_timestamp(self._getCurrentDateTime()) - timestamp
        self._runningWorkers[curTask.id] = wclass(curTask.id, self._config,
                                                  delay)
        self._runningWorkers[curTask.id].start()
示例#17
0
    def addTaskToWaitingQueue(self, task, index=False):

        if index:
            self._indexTask(task)

        # get an int timestamp
        timestamp = int_timestamp(task.getStartOn())

        self._waitingQueue.enqueue(timestamp, task)

        # make it "officially" queued
        task.setStatus(base.TASK_STATUS_QUEUED)

        logging.getLogger('scheduler').debug(
            'Added %s to waitingQueue..' % task)
示例#18
0
    def changeTaskStartDate(self, oldTS, task):

        newTS = int_timestamp(task.getStartOn())

        # enqueue-dequeue
        try:
            self._waitingQueue.dequeue(oldTS, task)
        except:
            logging.getLogger('scheduler').error(
                "%s was supposed to be changed but it was not "
                "found in the waiting queue!" % task)
            return

        self._waitingQueue.enqueue(newTS, task)

        logging.getLogger('scheduler').info(
            '%s moved from bin %s to %s...' % (task, oldTS, newTS))
示例#19
0
    def changeTaskStartDate(self, oldTS, task):

        newTS = int_timestamp(task.getStartOn())

        # enqueue-dequeue
        try:
            self._waitingQueue.dequeue(oldTS, task)
        except:
            logging.getLogger('scheduler').error(
                "%s was supposed to be changed but it was not "
                "found in the waiting queue!" % task)
            return

        self._waitingQueue.enqueue(newTS, task)

        logging.getLogger('scheduler').info(
            '%s moved from bin %s to %s...' % (task, oldTS, newTS))
示例#20
0
    def requestFinished(self, obj, req):

        sm = SyncManager.getDBInstance()
        cm = ContextManager.get('indico.ext.livesync:actions')
        cm_ids = ContextManager.get('indico.ext.livesync:ids')

        timestamp = int_timestamp(nowutc())

        # if the returned context is a dummy one, there's nothing to do
        if cm.__class__ == DummyDict:
            return

        # Insert the elements from the temporary index
        # into the permanent one (MPT)
        for obj, actions in cm.iteritems():
            objId = cm_ids[obj]
            for action in actions:
                Logger.get('ext.livesync').debug((objId, action))
                # TODO: remove redundant items
            if not sm.objectExcluded(obj):
                sm.add(timestamp, ActionWrapper(timestamp, obj, actions,
                                                objId))
示例#21
0
    def requestFinished(self, obj, req):

        sm = SyncManager.getDBInstance()
        cm = ContextManager.get('indico.ext.livesync:actions')
        cm_ids = ContextManager.get('indico.ext.livesync:ids')

        timestamp = int_timestamp(nowutc())

        # if the returned context is a dummy one, there's nothing to do
        if cm.__class__ == DummyDict:
            return

        # Insert the elements from the temporary index
        # into the permanent one (MPT)
        for obj, actions in cm.iteritems():
            objId = cm_ids[obj]
            for action in actions:
                Logger.get('ext.livesync').debug((objId, action))
                # TODO: remove redundant items
            if not sm.objectExcluded(obj):
                sm.add(timestamp,
                       ActionWrapper(timestamp, obj, actions, objId))
示例#22
0
 def _getAnswer(self):
     self._agent.preActivate(int_timestamp(nowutc()))
     return True
示例#23
0
 def moveTask(self, task, newDate):
     oldTS = int_timestamp(task.getStartOn())
     task.setStartOn(newDate)
     return self._schedMod.spool('change', (oldTS, task))
示例#24
0
文件: base.py 项目: bubbas/indico
 def _nextTS(self):
     time.sleep(1)
     return int_timestamp(nowutc())
示例#25
0
文件: handlers.py 项目: Ictp/indico
 def _getAnswer(self):
     self._agent.preActivate(int_timestamp(nowutc()) / self._sm.getGranularity())
     return True
示例#26
0
文件: base.py 项目: arturodr/indico
 def _nextTS(self):
     time.sleep(1)
     return int_timestamp(nowutc())
示例#27
0
 def _getAnswer(self):
     self._agent.preActivate(
         int_timestamp(nowutc()) / self._sm.getGranularity())
     return True
示例#28
0
 def _getAnswer(self):
     self._agent.preActivate(int_timestamp(nowutc()))
     return True
示例#29
0
 def getIndexingDateTime(self):
     return int_timestamp(self._getCurrentDateTime())