def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if self.ipxe_enabled:
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
if self.ipxe_enabled:
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe_utils.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
task.driver.boot.validate(task)
node = task.node
# Check the boot_mode, boot_option and disk_label capabilities values.
deploy_utils.validate_capabilities(node)
# Edit early if we are not writing a volume as the validate
# tasks evaluate root device hints.
if not task.driver.storage.should_write_image(task):
LOG.debug('Skipping complete deployment interface validation '
'for node %s as it is set to boot from a remote '
'volume.', node.uuid)
return
# TODO(rameshg87): iscsi_ilo driver uses this method. Remove
# and copy-paste it's contents here once iscsi_ilo deploy driver
# broken down into separate boot and deploy implementations.
validate(task)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
task.driver.boot.validate(task)
node = task.node
# Check the boot_mode, boot_option and disk_label capabilities values.
deploy_utils.validate_capabilities(node)
# Edit early if we are not writing a volume as the validate
# tasks evaluate root device hints.
if not task.driver.storage.should_write_image(task):
LOG.debug(
'Skipping complete deployment interface validation '
'for node %s as it is set to boot from a remote '
'volume.', node.uuid)
return
# TODO(rameshg87): iscsi_ilo driver used to call this function. Remove
# and copy-paste it's contents here.
validate(task)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue, if config option has invalid value.
:raises: IRMCSharedFileSystemNotMounted, if shared file system is
not mounted.
:raises: InvalidParameterValue, if some information is invalid.
:raises: MissingParameterValue if 'kernel_id' and 'ramdisk_id' are
missing in the Glance image, or if 'kernel' and 'ramdisk' are
missing in the Non Glance image.
"""
_check_share_fs_mounted()
iscsi_deploy.validate(task)
d_info = _parse_deploy_info(task.node)
if task.node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info,
props)
deploy_utils.validate_capabilities(task.node)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
# Validate node capabilities
deploy_utils.validate_capabilities(node)
if not task.driver.storage.should_write_image(task):
# NOTE(TheJulia): There is no reason to validate
# image properties if we will not be writing an image
# in a boot from volume case. As such, return to the caller.
LOG.debug(
'Skipping complete deployment interface validation '
'for node %s as it is set to boot from a remote '
'volume.', node.uuid)
return
params = {}
image_source = node.instance_info.get('image_source')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get('image_checksum'):
raise exception.MissingParameterValue(
_("image_source's image_checksum must be provided in "
"instance_info for node %s") % node.uuid)
check_image_size(task, image_source)
# Validate the root device hints
try:
root_device = node.properties.get('root_device')
il_utils.parse_root_device_hints(root_device)
except ValueError as e:
raise exception.InvalidParameterValue(
_('Failed to validate the root device hints for node '
'%(node)s. Error: %(error)s') % {
'node': node.uuid,
'error': e
})
validate_image_proxies(node)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.', {'node': node.uuid})
pxe.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def _validate_common(self, task):
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.") %
node.uuid)
if self.ipxe_enabled:
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# NOTE(zer0c00l): When 'kickstart' boot option is used we need to store
# kickstart and squashfs files in http_root directory. These files
# will be eventually requested by anaconda installer during deployment
# over http(s).
if deploy_utils.get_boot_option(node) == 'kickstart':
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(
_("'kickstart' boot option is set on the node but no HTTP "
"URL or HTTP root was specified."))
if not CONF.anaconda.default_ks_template:
raise exception.MissingParameterValue(
_("'kickstart' boot option is set on the node but no "
"default kickstart template is specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
if self.ipxe_enabled:
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning(
'Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe_utils.validate_boot_parameters_for_trusted_boot(node)
# Check if we have invalid parameters being passed which will not work
# for ramdisk configurations.
if (node.instance_info.get('image_source')
and node.instance_info.get('boot_iso')):
raise exception.InvalidParameterValue(
_("An 'image_source' and 'boot_iso' parameter may not be "
"specified at the same time."))
pxe_utils.parse_driver_info(node)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
if not CONF.deploy.http_url or not CONF.deploy.http_root:
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
# NOTE(TheJulia): So in theory (huge theory here, not put to
# practice or tested), that one can define the kernel as tboot
# and define the actual kernel and ramdisk as appended data.
# Similar to how one can iPXE load the XEN hypervisor.
# tboot mailing list seem to indicate pxe/ipxe support, or
# more specifically avoiding breaking the scenarios of use,
# but there is also no definitive documentation on the subject.
LOG.warning('Trusted boot has been requested for %(node)s in '
'concert with iPXE. This is not a supported '
'configuration for an ironic deployment.',
{'node': node.uuid})
pxe.validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
:param task: a TaskManager instance
:raises: MissingParameterValue if some parameters are missing.
"""
deploy_utils.validate_capabilities(task.node)
_parse_driver_info(task.node)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# Get the boot_mode capability value.
boot_mode = deploy_utils.get_boot_mode_for_deploy(node)
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url or
not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# iPXE and UEFI should not be configured together.
if boot_mode == 'uefi':
LOG.error(_LE("UEFI boot mode is not supported with "
"iPXE boot enabled."))
raise exception.InvalidParameterValue(_(
"Conflict: iPXE is enabled, but cannot be used with node"
"%(node_uuid)s configured to use UEFI boot") %
{'node_uuid': node.uuid})
if boot_mode == 'uefi':
validate_boot_option_for_uefi(node)
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
_parse_driver_info(node)
d_info = _parse_instance_info(node)
if node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
:param task: a TaskManager instance
:raises: MissingParameterValue if some parameters are missing.
"""
deploy_utils.validate_capabilities(task.node)
_parse_driver_info(task.node)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# Get the boot_mode capability value.
boot_mode = deploy_utils.get_boot_mode_for_deploy(node)
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url or
not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# iPXE and UEFI should not be configured together.
if boot_mode == 'uefi':
LOG.error(_LE("UEFI boot mode is not supported with "
"iPXE boot enabled."))
raise exception.InvalidParameterValue(_(
"Conflict: iPXE is enabled, but cannot be used with node"
"%(node_uuid)s configured to use UEFI boot") %
{'node_uuid': node.uuid})
if boot_mode == 'uefi':
validate_boot_option_for_uefi(node)
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
_parse_driver_info(node)
d_info = _parse_instance_info(node)
if node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
# Validate node capabilities
deploy_utils.validate_capabilities(node)
if not task.driver.storage.should_write_image(task):
# NOTE(TheJulia): There is no reason to validate
# image properties if we will not be writing an image
# in a boot from volume case. As such, return to the caller.
LOG.debug('Skipping complete deployment interface validation '
'for node %s as it is set to boot from a remote '
'volume.', node.uuid)
return
params = {}
image_source = node.instance_info.get('image_source')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get('image_checksum'):
raise exception.MissingParameterValue(_(
"image_source's image_checksum must be provided in "
"instance_info for node %s") % node.uuid)
check_image_size(task, image_source)
# Validate the root device hints
try:
root_device = node.properties.get('root_device')
il_utils.parse_root_device_hints(root_device)
except ValueError as e:
raise exception.InvalidParameterValue(
_('Failed to validate the root device hints for node '
'%(node)s. Error: %(error)s') % {'node': node.uuid,
'error': e})
validate_image_proxies(node)
def validate(self, task):
if 'ramdisk_boot' not in task.driver.boot.capabilities:
raise exception.InvalidParameterValue(
message=_('Invalid configuration: The boot interface '
'must have the `ramdisk_boot` capability. '
'You are using an incompatible boot interface.'))
task.driver.boot.validate(task)
# Validate node capabilities
deploy_utils.validate_capabilities(task.node)
def validate(self, task):
if 'ramdisk_boot' not in task.driver.boot.capabilities:
raise exception.InvalidParameterValue(
err=('Invalid configuration: The boot interface '
'must have the `ramdisk_boot` capability. '
'You are using an incompatible boot interface.'))
task.driver.boot.validate(task)
# Validate node capabilities
deploy_utils.validate_capabilities(task.node)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
:param task: a TaskManager instance
:raises: IRMCSharedFileSystemNotMounted, if shared file system is
not mounted.
:raises: InvalidParameterValue, if config option has invalid value.
:raises: MissingParameterValue if some parameters are missing.
"""
_check_share_fs_mounted()
_parse_driver_info(task.node)
deploy_utils.validate_capabilities(task.node)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
node = task.node
# Check the boot_mode and boot_option capabilities values.
deploy_utils.validate_capabilities(node)
boot_mode = deploy_utils.get_boot_mode_for_deploy(task.node)
if CONF.pxe.ipxe_enabled:
if not CONF.pxe.http_url or not CONF.pxe.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP " "root was specified.")
)
# iPXE and UEFI should not be configured together.
if boot_mode == "uefi":
LOG.error(_LE("UEFI boot mode is not supported with " "iPXE boot enabled."))
raise exception.InvalidParameterValue(
_(
"Conflict: iPXE is enabled, but cannot be used with node"
"%(node_uuid)s configured to use UEFI boot"
)
% {"node_uuid": node.uuid}
)
# Check if 'boot_option' is compatible with 'boot_mode' of uefi and
# image being deployed
if boot_mode == "uefi":
validate_boot_option_for_uefi(task.node)
if deploy_utils.is_trusted_boot_requested(task.node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(task.node)
d_info = _parse_deploy_info(node)
iscsi_deploy.validate(task)
if node.driver_internal_info.get("is_whole_disk_image"):
props = []
elif service_utils.is_glance_image(d_info["image_source"]):
props = ["kernel_id", "ramdisk_id"]
else:
props = ["kernel", "ramdisk"]
iscsi_deploy.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
node = task.node
# Check the boot_mode and boot_option capabilities values.
deploy_utils.validate_capabilities(node)
boot_mode = deploy_utils.get_boot_mode_for_deploy(task.node)
if CONF.pxe.ipxe_enabled:
if not CONF.pxe.http_url or not CONF.pxe.http_root:
raise exception.MissingParameterValue(
_("iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# iPXE and UEFI should not be configured together.
if boot_mode == 'uefi':
LOG.error(
_LE("UEFI boot mode is not supported with "
"iPXE boot enabled."))
raise exception.InvalidParameterValue(
_("Conflict: iPXE is enabled, but cannot be used with node"
"%(node_uuid)s configured to use UEFI boot") %
{'node_uuid': node.uuid})
# Check if 'boot_option' is compatible with 'boot_mode' of uefi and
# image being deployed
if boot_mode == 'uefi':
validate_boot_option_for_uefi(task.node)
if deploy_utils.is_trusted_boot_requested(task.node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(task.node)
d_info = _parse_deploy_info(node)
iscsi_deploy.validate(task)
if node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
iscsi_deploy.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the PXE-specific info for booting deploy/instance images.
This method validates the PXE-specific info for booting the
ramdisk and instance on the node. If invalid, raises an
exception; otherwise returns None.
:param task: a task from TaskManager.
:returns: None
:raises: InvalidParameterValue, if some parameters are invalid.
:raises: MissingParameterValue, if some required parameters are
missing.
"""
node = task.node
if not driver_utils.get_node_mac_addresses(task):
raise exception.MissingParameterValue(
_("Node %s does not have any port associated with it.")
% node.uuid)
# TODO(TheJulia): Once ipxe support is remove from the pxe
# interface, this can be removed.
if CONF.pxe.ipxe_enabled:
if (not CONF.deploy.http_url
or not CONF.deploy.http_root):
raise exception.MissingParameterValue(_(
"iPXE boot is enabled but no HTTP URL or HTTP "
"root was specified."))
# Check the trusted_boot capabilities value.
deploy_utils.validate_capabilities(node)
if deploy_utils.is_trusted_boot_requested(node):
# Check if 'boot_option' and boot mode is compatible with
# trusted boot.
validate_boot_parameters_for_trusted_boot(node)
pxe_utils.parse_driver_info(node)
# NOTE(TheJulia): If we're not writing an image, we can skip
# the remainder of this method.
if (not task.driver.storage.should_write_image(task)):
return
d_info = deploy_utils.get_image_instance_info(node)
if (node.driver_internal_info.get('is_whole_disk_image')
or deploy_utils.get_boot_option(node) == 'local'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
params = {}
image_source = node.instance_info.get('image_source')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get('image_checksum'):
raise exception.MissingParameterValue(
_("image_source's image_checksum must be provided in "
"instance_info for node %s") % node.uuid)
check_image_size(task, image_source)
is_whole_disk_image = node.driver_internal_info.get(
'is_whole_disk_image')
# TODO(sirushtim): Remove once IPA has support for partition images.
if is_whole_disk_image is False:
raise exception.InvalidParameterValue(
_("Node %(node)s is configured to use the %(driver)s driver "
"which currently does not support deploying partition "
"images.") % {
'node': node.uuid,
'driver': node.driver
})
# Validate the root device hints
deploy_utils.parse_root_device_hints(node)
# Validate node capabilities
deploy_utils.validate_capabilities(node)
validate_image_proxies(node)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
params = {}
image_source = node.instance_info.get("image_source")
params["instance_info.image_source"] = image_source
error_msg = _("Node %s failed to validate deploy image info. Some " "parameters were missing") % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get("image_checksum"):
raise exception.MissingParameterValue(
_("image_source's image_checksum must be provided in " "instance_info for node %s") % node.uuid
)
check_image_size(task, image_source)
is_whole_disk_image = node.driver_internal_info.get("is_whole_disk_image")
# TODO(sirushtim): Remove once IPA has support for partition images.
if is_whole_disk_image is False:
raise exception.InvalidParameterValue(
_(
"Node %(node)s is configured to use the %(driver)s driver "
"which currently does not support deploying partition "
"images."
)
% {"node": node.uuid, "driver": node.driver}
)
# Validate the root device hints
deploy_utils.parse_root_device_hints(node)
# Validate node capabilities
deploy_utils.validate_capabilities(node)
validate_image_proxies(node)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
params = {}
image_source = node.instance_info.get('image_source')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get('image_checksum'):
raise exception.MissingParameterValue(
_("image_source's image_checksum must be provided in "
"instance_info for node %s") % node.uuid)
check_image_size(task, image_source)
# Validate the root device hints
try:
root_device = node.properties.get('root_device')
il_utils.parse_root_device_hints(root_device)
except ValueError as e:
raise exception.InvalidParameterValue(
_('Failed to validate the root device hints for node '
'%(node)s. Error: %(error)s') % {
'node': node.uuid,
'error': e
})
# Validate node capabilities
deploy_utils.validate_capabilities(node)
validate_image_proxies(node)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
params = {}
image_source = node.instance_info.get('image_source')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
if not node.instance_info.get('image_checksum'):
raise exception.MissingParameterValue(_(
"image_source's image_checksum must be provided in "
"instance_info for node %s") % node.uuid)
check_image_size(task, image_source)
# Validate the root device hints
try:
root_device = node.properties.get('root_device')
il_utils.parse_root_device_hints(root_device)
except ValueError as e:
raise exception.InvalidParameterValue(
_('Failed to validate the root device hints for node '
'%(node)s. Error: %(error)s') % {'node': node.uuid,
'error': e})
# Validate node capabilities
deploy_utils.validate_capabilities(node)
validate_image_proxies(node)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
task.driver.boot.validate(task)
node = task.node
# Check the boot_mode and boot_option capabilities values.
deploy_utils.validate_capabilities(node)
# TODO(rameshg87): iscsi_ilo driver uses this method. Remove
# and copy-paste it's contents here once iscsi_ilo deploy driver
# broken down into separate boot and deploy implementations.
validate(task)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
task.driver.boot.validate(task)
node = task.node
# Check the boot_mode, boot_option and disk_label capabilities values.
deploy_utils.validate_capabilities(node)
# TODO(rameshg87): iscsi_ilo driver uses this method. Remove
# and copy-paste it's contents here once iscsi_ilo deploy driver
# broken down into separate boot and deploy implementations.
validate(task)
def validate(self, task, method, **kwargs):
"""Validates the inputs for a vendor passthru.
If invalid, raises an exception; otherwise returns None.
Valid methods:
* pass_deploy_info
* pass_bootloader_install_info
:param task: a TaskManager instance containing the node to act on.
:param method: method to be validated.
:param kwargs: kwargs containins the method's parameters.
:raises: InvalidParameterValue if any parameters is invalid.
"""
if method == 'pass_deploy_info':
deploy_utils.validate_capabilities(task.node)
get_deploy_info(task.node, **kwargs)
elif method == 'pass_bootloader_install_info':
validate_pass_bootloader_info_input(task, kwargs)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
deploy_utils.validate_capabilities(task.node)
# Validate the root device hints
deploy_utils.get_root_device_for_deploy(task.node)
def validate(self, task, method, **kwargs):
"""Validates the inputs for a vendor passthru.
If invalid, raises an exception; otherwise returns None.
Valid methods:
* pass_deploy_info
* pass_bootloader_install_info
:param task: a TaskManager instance containing the node to act on.
:param method: method to be validated.
:param kwargs: kwargs containins the method's parameters.
:raises: InvalidParameterValue if any parameters is invalid.
"""
if method == 'pass_deploy_info':
deploy_utils.validate_capabilities(task.node)
iscsi_deploy.get_deploy_info(task.node, **kwargs)
elif method == 'pass_bootloader_install_info':
iscsi_deploy.validate_pass_bootloader_info_input(task, kwargs)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue, if some information is invalid.
:raises: MissingParameterValue if 'kernel_id' and 'ramdisk_id' are
missing in the Glance image or 'kernel' and 'ramdisk' not provided
in instance_info for non-Glance image.
"""
iscsi_deploy.validate(task)
node = task.node
d_info = _parse_deploy_info(node)
if node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
iscsi_deploy.validate_image_properties(task.context, d_info, props)
deploy_utils.validate_capabilities(node)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue, if some information is invalid.
:raises: MissingParameterValue if 'kernel_id' and 'ramdisk_id' are
missing in the Glance image or 'kernel' and 'ramdisk' not provided
in instance_info for non-Glance image.
"""
iscsi_deploy.validate(task)
node = task.node
d_info = _parse_deploy_info(node)
if node.driver_internal_info.get('is_whole_disk_image'):
props = []
elif service_utils.is_glance_image(d_info['image_source']):
props = ['kernel_id', 'ramdisk_id']
else:
props = ['kernel', 'ramdisk']
deploy_utils.validate_image_properties(task.context, d_info, props)
deploy_utils.validate_capabilities(node)
def validate(self, task):
"""Validate the deployment information for the task's node.
:param task: a TaskManager instance containing the node to act on.
:raises: InvalidParameterValue.
:raises: MissingParameterValue
"""
task.driver.boot.validate(task)
node = task.node
# Check the boot_mode, boot_option and disk_label capabilities values.
deploy_utils.validate_capabilities(node)
# Edit early if we are not writing a volume as the validate
# tasks evaluate root device hints.
if not task.driver.storage.should_write_image(task):
return
# TODO(rameshg87): iscsi_ilo driver uses this method. Remove
# and copy-paste it's contents here once iscsi_ilo deploy driver
# broken down into separate boot and deploy implementations.
validate(task)
def validate(self, task, method, **kwargs):
"""Validates the inputs for a vendor passthru.
If invalid, raises an exception; otherwise returns None.
Valid methods:
* pass_deploy_info
* pass_bootloader_install_info
:param task: a TaskManager instance containing the node to act on.
:param method: method to be validated.
:param kwargs: kwargs containins the method's parameters.
:raises: InvalidParameterValue if any parameters is invalid.
"""
if method == "pass_deploy_info":
# TODO(rameshg87): Don't validate deploy info if bash ramdisk
# booted during cleaning. It will be handled in pass_deploy_info
# method. Remove the below code once we stop supporting bash
# ramdisk in Ironic.
if task.node.provision_state != states.CLEANWAIT:
deploy_utils.validate_capabilities(task.node)
get_deploy_info(task.node, **kwargs)
elif method == "pass_bootloader_install_info":
validate_pass_bootloader_info_input(task, kwargs)
def validate(self, task, method, **kwargs):
"""Validates the inputs for a vendor passthru.
If invalid, raises an exception; otherwise returns None.
Valid methods:
* pass_deploy_info
* pass_bootloader_install_info
:param task: a TaskManager instance containing the node to act on.
:param method: method to be validated.
:param kwargs: kwargs containins the method's parameters.
:raises: InvalidParameterValue if any parameters is invalid.
"""
if method == 'pass_deploy_info':
# TODO(rameshg87): Don't validate deploy info if bash ramdisk
# booted during cleaning. It will be handled in pass_deploy_info
# method. Remove the below code once we stop supporting bash
# ramdisk in Ironic.
if task.node.provision_state != states.CLEANWAIT:
deploy_utils.validate_capabilities(task.node)
get_deploy_info(task.node, **kwargs)
elif method == 'pass_bootloader_install_info':
validate_pass_bootloader_info_input(task, kwargs)
def validate(self, task):
"""Validate the driver-specific Node deployment info.
This method validates whether the properties of the supplied node
contain the required information for this driver to deploy images to
the node.
:param task: a TaskManager instance
:raises: MissingParameterValue, if any of the required parameters are
missing.
:raises: InvalidParameterValue, if any of the parameters have invalid
value.
"""
if CONF.agent.manage_agent_boot:
task.driver.boot.validate(task)
node = task.node
# Validate node capabilities
deploy_utils.validate_capabilities(node)
if not task.driver.storage.should_write_image(task):
# NOTE(TheJulia): There is no reason to validate
# image properties if we will not be writing an image
# in a boot from volume case. As such, return to the caller.
LOG.debug(
'Skipping complete deployment interface validation '
'for node %s as it is set to boot from a remote '
'volume.', node.uuid)
return
params = {}
image_source = node.instance_info.get('image_source')
image_checksum = node.instance_info.get('image_checksum')
image_disk_format = node.instance_info.get('image_disk_format')
os_hash_algo = node.instance_info.get('image_os_hash_algo')
os_hash_value = node.instance_info.get('image_os_hash_value')
params['instance_info.image_source'] = image_source
error_msg = _('Node %s failed to validate deploy image info. Some '
'parameters were missing') % node.uuid
deploy_utils.check_for_missing_params(params, error_msg)
if not service_utils.is_glance_image(image_source):
def _raise_missing_checksum_exception(node):
raise exception.MissingParameterValue(
_('image_source\'s "image_checksum", or '
'"image_os_hash_algo" and "image_os_hash_value" '
'must be provided in instance_info for '
'node %s') % node.uuid)
if os_hash_value and not os_hash_algo:
# We are missing a piece of information,
# so we still need to raise an error.
_raise_missing_checksum_exception(node)
elif not os_hash_value and os_hash_algo:
# We have the hash setting, but not the hash.
_raise_missing_checksum_exception(node)
elif not os_hash_value and not image_checksum:
# We are lacking the original image_checksum,
# so we raise the error.
_raise_missing_checksum_exception(node)
validate_http_provisioning_configuration(node)
check_image_size(task, image_source, image_disk_format)
# Validate the root device hints
deploy_utils.get_root_device_for_deploy(node)
validate_image_proxies(node)
