def recordCodes(deviceName):
"""Ask the user what the button press should be called and return as a dict of
name:code key/value pairs. Similar to the Lirc irrecord tool"""
serialDevice = serial.Serial(deviceName)
toy = IrToy(serialDevice)
codes = {}
while True:
try:
input = raw_input
except NameError:
pass
label = input("Please enter a name for the button you will press, or Enter to finish:\n")
if label == "":
break
else:
toy.reset()
print("press the remote control button once for the %s button:" % label)
codes[label] = toy.receive()
serialDevice.close()
return codes
def recordCodes(deviceName):
'''Ask the user what the button press should be called and return as a dict of
name:code key/value pairs. Similar to the Lirc irrecord tool'''
serialDevice = serial.Serial(deviceName)
toy = IrToy(serialDevice)
codes = {}
while True:
try:
input = raw_input
except NameError:
pass
label = input('Please enter a name for the button you will press, or Enter to finish:\n')
if label == '':
break
else:
toy.reset()
print('press the remote control button once for the %s button:' % label)
codes[label] = toy.receive()
serialDevice.close()
return codes
def set_temp(deviceName, jsonFile, temp):
with open(jsonFile, 'r') as inFile:
codes = json.load(inFile)
irCode = codes[temp]
if irCode:
with serial.Serial(deviceName) as serialDevice:
toy = IrToy(serialDevice)
toy.transmit(codes[temp])
logging.debug('response from IR Toy: handshake: %d bytecount: %d complete: %s' % (toy.handshake, toy.byteCount, toy.complete))
def set_temp(deviceName, jsonFile, temp):
with open(jsonFile, 'r') as inFile:
codes = json.load(inFile)
irCode = codes[temp]
if irCode:
with serial.Serial(deviceName) as serialDevice:
toy = IrToy(serialDevice)
toy.transmit(codes[temp])
logging.debug(
'response from IR Toy: handshake: %d bytecount: %d complete: %s'
% (toy.handshake, toy.byteCount, toy.complete))
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode = [
1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0,
25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26,
0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 25, 0,
26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25,
0, 27, 0, 77, 0, 27, 0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0,
24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28, 0, 24, 0, 27,
0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0,
28, 7, 15, 1, 160, 0, 107, 0, 27, 255, 255
] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)
def main():
args = getCommandLineArgs()
device = serial.Serial(args.device)
filename = args.file
with open(filename, 'r') as inFile:
codes = json.load(inFile)
for codeKey in args.commands:
toy = IrToy(device)
toy.transmit(codes[codeKey])
print('code:', codeKey, 'code length:', len(codes[codeKey]),
'handshake:', toy.handshake, 'bytecount:', toy.byteCount,
'complete:', toy.complete)
device.close()
def click(self, control):
cherrypy.response.headers["Content-Type"] = "application/json"
toy = IrToy(device)
toy.transmit(codes[control])
print (
"code:",
control,
"code length:",
len(codes[control]),
"handshake:",
toy.handshake,
"bytecount:",
toy.byteCount,
"complete:",
toy.complete,
)
return simplejson.dumps(dict(response="Recieved and transmitted, %s" % control))
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode=[1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0,
25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26, 0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26,
0, 25, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25, 0, 27, 0, 77, 0, 27,
0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28,
0, 24, 0, 27, 0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0, 28, 7, 15, 1, 160,
0, 107, 0, 27, 255, 255] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)
def send_ir_code(codename="power-on"):
raw_packet = {}
s = serial.Serial(port='/dev/tty.usbmodem00000001', timeout=1)
ir = IrToy(s)
raw_packet[
'UN-JEON/JEONG-JI_18'] = """01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 4E
00 1E 00 4E 00 1E 00 1E 00 1E 00 4E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 4E 00 1E 00 4E
00 1E 00 4E 00 1E FF FF """
# on 18degree
raw_packet[
'UN-JEON/JEONG-JI_OFF'] = """01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 4E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 4E 00 1E
00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E FF FF """
# 끄기?
raw_packet[
'mode-dry'] = """ 01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E 00 4E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E FF FF """
# 모드2
raw_packet = raw_packet[codename].replace(" ",
"").replace("\n", "").replace(
"\t", "").decode('hex')
raw_packet_l = [ord(c) for c in raw_packet]
#name LGE_6711A20015N
bits = 20
#flags SPACE_ENC|CONST_LENGTH
#eps 30
# aeps 100
# header 8576 4224 -> 8567us
# one 640 1664
# zero 640 640
# ptrail 640
# pre_data_bits = 8
pre_data = 0x88
#actually this remote does not send any repeat signals!
# gap = 1000000
# toggle_bit 0
# data = '00347'.encode('hex')
# padding_length = bits - len(data) - 1
# raw_data = pre_data + + data
try:
# ir.reset()
print "ir tr"
ir.transmit(raw_packet_l)
print "ir irmode"
ir.IRMode()
pass
except Exception, e:
pass
def send_ir_code(codename="power-on"):
raw_packet = {}
s = serial.Serial(port='/dev/tty.usbmodem00000001', timeout=1)
ir = IrToy(s)
raw_packet['UN-JEON/JEONG-JI_18'] = """01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 4E
00 1E 00 4E 00 1E 00 1E 00 1E 00 4E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 4E 00 1E 00 4E
00 1E 00 4E 00 1E FF FF """
# on 18degree
raw_packet['UN-JEON/JEONG-JI_OFF'] = """01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 4E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 4E 00 1E
00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E FF FF """
# 끄기?
raw_packet['mode-dry'] = """ 01 92 00 C6 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 4E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E 00 4E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E 00 1E
00 1E 00 1E 00 4E 00 1E FF FF """
# 모드2
raw_packet = raw_packet[codename].replace(" ", "").replace("\n", "").replace("\t", "").decode('hex')
raw_packet_l = [ord(c) for c in raw_packet]
#name LGE_6711A20015N
bits=20
#flags SPACE_ENC|CONST_LENGTH
#eps 30
# aeps 100
# header 8576 4224 -> 8567us
# one 640 1664
# zero 640 640
# ptrail 640
# pre_data_bits = 8
pre_data = 0x88
#actually this remote does not send any repeat signals!
# gap = 1000000
# toggle_bit 0
# data = '00347'.encode('hex')
# padding_length = bits - len(data) - 1
# raw_data = pre_data + + data
try:
# ir.reset()
print "ir tr"
ir.transmit(raw_packet_l)
print "ir irmode"
ir.IRMode()
pass
except Exception, e:
pass
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
class TestIrToy(unittest.TestCase):
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
def testTransmit(self):
# length of code sent must be even
self.assertRaises(ValueError, self.toy.transmit, [10])
# set the expected results from read(): protocol version, handshake ('>' converts to 62),
# byte count transmitted, and completion code.
self.serialMock.setReadCode([bytearray([62]), bytearray([62]), bytearray([0,0,0,1]), b'C', b'S01'])
self.toy.transmit([10,10])
# when transmitting, we expect a reset (five 0x00), 'S' to enter sampling mode, 0x26 for enable handshake,
# 0x25 to enable notify on transmit, 0x24 to enable transmit byte count, and 0x03 to start the transmission,
# then the list of codes to transmit (always ending with 0xff, 0xff), and another reset. See DP link at top of this file for more info.
expectedHistory = [[0x00, 0x00, 0x00, 0x00, 0x00],
'v',
[0x00, 0x00, 0x00, 0x00, 0x00],
'v',
[0x00, 0x00, 0x00, 0x00, 0x00],
b'S', [0x26], [0x25], [0x24], [0x03],
[10, 10, 0xff, 0xff],
[0x00, 0x00, 0x00, 0x00, 0x00],
b'S']
self.assertEqual(self.serialMock.writeHistory, expectedHistory)
def testReceive(self):
# pretend to be receiving the following signals from the IR Toy, must end with 0xff,0xff (same as 255, means no signal)
# or the code will keep recording indefinitely. First element is for the protocol version, since receive() resets the toy
self.serialMock.setReadCode([bytearray([62]), bytearray([1]), bytearray([2]), bytearray([0xff]), bytearray([0xff])])
readSignal = self.toy.receive()
self.assertEqual(readSignal, [1, 2, 0xff, 0xff])
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode=[1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0,
25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26, 0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26,
0, 25, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25, 0, 27, 0, 77, 0, 27,
0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28,
0, 24, 0, 27, 0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0, 28, 7, 15, 1, 160,
0, 107, 0, 27, 255, 255] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
class TestIrToy(unittest.TestCase):
def setUp(self):
self.serialMock = SerialMock()
self.toy = IrToy(self.serialMock)
self.toy.sleepTime = 0
def testTransmit(self):
# length of code sent must be even
self.assertRaises(ValueError, self.toy.transmit, [10])
# set the expected results from read(): protocol version, handshake ('>' converts to 62),
# byte count transmitted, and completion code.
self.serialMock.setReadCode([
bytearray([62]),
bytearray([62]),
bytearray([0, 0, 0, 1]), b'C', b'S01'
])
self.toy.transmit([10, 10])
# when transmitting, we expect a reset (five 0x00), 'S' to enter sampling mode, 0x26 for enable handshake,
# 0x25 to enable notify on transmit, 0x24 to enable transmit byte count, and 0x03 to start the transmission,
# then the list of codes to transmit (always ending with 0xff, 0xff), and another reset. See DP link at top of this file for more info.
expectedHistory = [[0x00, 0x00, 0x00, 0x00, 0x00], 'v',
[0x00, 0x00, 0x00, 0x00, 0x00], 'v',
[0x00, 0x00, 0x00, 0x00, 0x00], b'S', [0x26],
[0x25], [0x24], [0x03], [10, 10, 0xff, 0xff],
[0x00, 0x00, 0x00, 0x00, 0x00], b'S']
self.assertEqual(self.serialMock.writeHistory, expectedHistory)
def testReceive(self):
# pretend to be receiving the following signals from the IR Toy, must end with 0xff,0xff (same as 255, means no signal)
# or the code will keep recording indefinitely. First element is for the protocol version, since receive() resets the toy
self.serialMock.setReadCode([
bytearray([62]),
bytearray([1]),
bytearray([2]),
bytearray([0xff]),
bytearray([0xff])
])
readSignal = self.toy.receive()
self.assertEqual(readSignal, [1, 2, 0xff, 0xff])
def XtestMultipleTransmits(self):
# tracking down a bug that shows itself when we transmit using the same object for more than one transmit. Method
# name starts with X to avoid running with other tests, this one is run manually since you need the IR Toy hardware
# and the pySerial module which isn't necessarily installed by default.
# IR code that causes an issue, any code would probably work for this purpose.
irCode = [
1, 159, 0, 212, 0, 26, 0, 25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 26, 0,
25, 0, 26, 0, 78, 0, 26, 0, 25, 0, 27, 0, 77, 0, 26, 0, 77, 0, 26,
0, 78, 0, 26, 0, 26, 0, 26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 25, 0,
26, 0, 78, 0, 26, 0, 78, 0, 26, 0, 24, 0, 28, 0, 76, 0, 27, 0, 25,
0, 27, 0, 77, 0, 27, 0, 25, 0, 27, 0, 24, 0, 27, 0, 24, 0, 28, 0,
24, 0, 28, 0, 24, 0, 28, 0, 24, 0, 27, 0, 76, 0, 28, 0, 24, 0, 27,
0, 77, 0, 27, 0, 76, 0, 27, 0, 76, 0, 28, 0, 76, 0, 27, 0, 76, 0,
28, 7, 15, 1, 160, 0, 107, 0, 27, 255, 255
] #Onkyo TX-SR508 mute
import serial
serialDevice = serial.Serial('/dev/ttyACM0')
#serialDevice = self.serialMock
# re-using a single object with multiple transmits
toy = IrToy(serialDevice)
for i in range(5):
toy.transmit(irCode)
# using a new object for each transmit
for i in range(5):
toy2 = IrToy(serialDevice)
toy2.transmit(irCode)
