Python recipe_result示例

示例#1

    recipe.input_value_by_name('additional-idf', add_str_)
    recipe.input_value_by_name('air-speed', _air_speed_)
    recipe.input_value_by_name('comfort-parameters', comfort_par_)
    recipe.input_value_by_name('solarcal-parameters', solar_body_par_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    silent = True if _run > 1 else False
    project_folder = recipe.run(run_settings_,
                                radiance_check=True,
                                openstudio_check=True,
                                silent=silent)

    # load the results
    try:
        env_conds = recipe_result(
            recipe.output_value_by_name('environmental-conditions',
                                        project_folder))
        op_temp = recipe_result(
            recipe.output_value_by_name('temperature', project_folder))
        condition = recipe_result(
            recipe.output_value_by_name('condition', project_folder))
        deg_neut = recipe_result(
            recipe.output_value_by_name('degrees-from-neutral',
                                        project_folder))
        TCP = recipe_result(recipe.output_value_by_name('tcp', project_folder))
        HSP = recipe_result(recipe.output_value_by_name('hsp', project_folder))
        CSP = recipe_result(recipe.output_value_by_name('csp', project_folder))
    except Exception:
        raise Exception(recipe.failure_message(project_folder))

示例#2

文件： HB UTCI Comfort Map.py 项目： ladybug-tools/honeybee-grasshopper-energy

        recipe.input_value_by_name('air-speed-matrices', _wind_speed_)
    else:
        recipe.input_value_by_name('wind-speed', _wind_speed_)
    recipe.input_value_by_name('schedule', schedule_)
    recipe.input_value_by_name('solarcal-parameters', solar_body_par_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    silent = True if _run > 1 else False
    project_folder = recipe.run(run_settings_,
                                radiance_check=True,
                                openstudio_check=True,
                                silent=silent)

    # load the results
    try:
        env_conds = recipe_result(
            recipe.output_value_by_name('environmental-conditions',
                                        project_folder))
        utci = recipe_result(
            recipe.output_value_by_name('utci', project_folder))
        condition = recipe_result(
            recipe.output_value_by_name('condition', project_folder))
        category = recipe_result(
            recipe.output_value_by_name('category', project_folder))
        TCP = recipe_result(recipe.output_value_by_name('tcp', project_folder))
        HSP = recipe_result(recipe.output_value_by_name('hsp', project_folder))
        CSP = recipe_result(recipe.output_value_by_name('csp', project_folder))
    except Exception:
        raise Exception(recipe.failure_message(project_folder))

示例#3

文件： HB Annual Daylight.py 项目： ladybug-tools/honeybee-grasshopper-radiance

try:
    from ladybug_rhino.grasshopper import all_required_inputs, recipe_result
except ImportError as e:
    raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e))

if all_required_inputs(ghenv.Component) and _run:
    # create the recipe and set the input arguments
    recipe = Recipe('annual-daylight')
    recipe.input_value_by_name('model', _model)
    recipe.input_value_by_name('wea', _wea)
    recipe.input_value_by_name('north', north_)
    recipe.input_value_by_name('thresholds', _thresholds_)
    recipe.input_value_by_name('schedule', _schedule_)
    recipe.input_value_by_name('grid-filter', grid_filter_)
    recipe.input_value_by_name('sensor-count', sensor_count_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    project_folder = recipe.run(run_settings_, radiance_check=True)

    # load the results
    results = recipe_result(
        recipe.output_value_by_name('results', project_folder))
    DA = recipe_result(recipe.output_value_by_name('da', project_folder))
    cDA = recipe_result(recipe.output_value_by_name('cda', project_folder))
    UDI = recipe_result(recipe.output_value_by_name('udi', project_folder))
    UDI_low = recipe_result(
        recipe.output_value_by_name('udi-lower', project_folder))
    UDI_up = recipe_result(
        recipe.output_value_by_name('udi-upper', project_folder))

示例#4

文件： HB Point-In-Time Grid-Based.py 项目： ladybug-tools/honeybee-grasshopper-radiance

ghenv.Component.Category = 'HB-Radiance'
ghenv.Component.SubCategory = '3 :: Recipes'
ghenv.Component.AdditionalHelpFromDocStrings = '2'

try:
    from lbt_recipes.recipe import Recipe
except ImportError as e:
    raise ImportError('\nFailed to import lbt_recipes:\n\t{}'.format(e))

try:
    from ladybug_rhino.grasshopper import all_required_inputs, recipe_result
except ImportError as e:
    raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e))


if all_required_inputs(ghenv.Component) and _run:
    # create the recipe and set the input arguments
    recipe = Recipe('point-in-time-grid')
    recipe.input_value_by_name('model', _model)
    recipe.input_value_by_name('sky', _sky)
    recipe.input_value_by_name('metric', _metric_)
    recipe.input_value_by_name('grid-filter', grid_filter_)
    recipe.input_value_by_name('sensor-count', sensor_count_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    project_folder = recipe.run(run_settings_, radiance_check=True)

    # load the results
    results = recipe_result(recipe.output_value_by_name('results', project_folder))

示例#5

文件： HB Annual Irradiance.py 项目： ladybug-tools/honeybee-grasshopper-radiance

try:
    from lbt_recipes.recipe import Recipe
except ImportError as e:
    raise ImportError('\nFailed to import lbt_recipes:\n\t{}'.format(e))

try:
    from ladybug_rhino.grasshopper import all_required_inputs, recipe_result
except ImportError as e:
    raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e))


if all_required_inputs(ghenv.Component) and _run:
    # create the recipe and set the input arguments
    recipe = Recipe('annual-irradiance')
    recipe.input_value_by_name('model', _model)
    recipe.input_value_by_name('wea', _wea)
    recipe.input_value_by_name('north', north_)
    recipe.input_value_by_name('grid-filter', grid_filter_)
    recipe.input_value_by_name('sensor-count', sensor_count_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    project_folder = recipe.run(run_settings_, radiance_check=True)

    # load the results
    results = recipe_result(recipe.output_value_by_name('results', project_folder))
    avg_irr = recipe_result(recipe.output_value_by_name('average-irradiance', project_folder))
    peak_irr = recipe_result(recipe.output_value_by_name('peak-irradiance', project_folder))
    radiation = recipe_result(recipe.output_value_by_name('cumulative-radiation', project_folder))

示例#6

文件： HB PMV Comfort Map.py 项目： coditect/honeybee-grasshopper-energy

    # create the recipe and set the input arguments
    recipe = Recipe('pmv_comfort_map')
    recipe.input_value_by_name('model', _model)
    recipe.input_value_by_name('epw', _epw)
    recipe.input_value_by_name('ddy', _ddy)
    recipe.input_value_by_name('north', north_)
    recipe.input_value_by_name('run-period', run_period_)
    recipe.input_value_by_name('sensor-count', sensor_count_)
    recipe.input_value_by_name('write-set-map', write_set_map_)
    recipe.input_value_by_name('air-speed', _air_speed_)
    recipe.input_value_by_name('met-rate', _met_rate_)
    recipe.input_value_by_name('clo-value', _clo_value_)
    recipe.input_value_by_name('comfort-parameters', comfort_par_)
    recipe.input_value_by_name('solarcal-parameters', solar_body_par_)
    recipe.input_value_by_name('radiance-parameters', radiance_par_)

    # run the recipe
    project_folder = recipe.run(run_settings_,
                                radiance_check=True,
                                openstudio_check=True)

    # load the results
    temperature = recipe_result(
        recipe.output_value_by_name('temperature', project_folder))
    condition = recipe_result(
        recipe.output_value_by_name('condition', project_folder))
    pmv = recipe_result(recipe.output_value_by_name('pmv', project_folder))
    TCP = recipe_result(recipe.output_value_by_name('tcp', project_folder))
    HSP = recipe_result(recipe.output_value_by_name('hsp', project_folder))
    CSP = recipe_result(recipe.output_value_by_name('csp', project_folder))

示例#7

ghenv.Component.AdditionalHelpFromDocStrings = '3'

try:
    from lbt_recipes.recipe import Recipe
except ImportError as e:
    raise ImportError('\nFailed to import lbt_recipes:\n\t{}'.format(e))

try:
    from ladybug_rhino.grasshopper import all_required_inputs, recipe_result
except ImportError as e:
    raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e))

if all_required_inputs(ghenv.Component) and _run:
    # create the recipe and set the input arguments
    recipe = Recipe('direct-sun-hours')
    recipe.input_value_by_name('model', _model)
    recipe.input_value_by_name('wea', _wea)
    recipe.input_value_by_name('timestep', _timestep_)
    recipe.input_value_by_name('north', north_)
    recipe.input_value_by_name('grid-filter', grid_filter_)
    recipe.input_value_by_name('sensor-count', sensor_count_)

    # run the recipe
    project_folder = recipe.run(run_settings_, radiance_check=True)

    # load the results
    results = recipe_result(
        recipe.output_value_by_name('direct-sun-hours', project_folder))
    hours = recipe_result(
        recipe.output_value_by_name('cumulative-sun-hours', project_folder))