def EventSelectionLosses(df, df_trig):
print("TOTAL NUMBER OF EVENT TIME TANKS SET: " +
str(len(set(df_trig['eventTimeTank']))))
print("TOTAL NUMBER OF EVENT TIME TANKS, LIST: " +
str(len(df_trig['eventTimeTank'])))
print("TOTAL NUMBER OF ENTRIES: " + str(len(df_trig)))
df_cleanSiPM = es.SingleSiPMPulses(df_trig)
print("TOTAL NUMBER OF EVENTS W/ ONE PULSE IN EACH SIPM: " +
str(len(set(df_cleanSiPM['eventTimeTank']))))
df_SinglePulses = es.SingleSiPMPulses(
df) #Clusters with a single SiPM pulse
df_cleanSiPMDT = es.SingleSiPMPulsesDeltaT(df_trig, 200)
print(
"TOTAL NUMBER OF EVENTS W/ ONE PULSE IN EACH SIPM, PEAKS WITHIN 200 NS: "
+ str(len(set(df_cleanSiPMDT['eventTimeTank']))))
df_trig_cleanSiPM = df_trig.loc[(df_trig['SiPM1NPulses'] == 1) & (
df_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
df_cleanPrompt = es.NoPromptClusters(df_SinglePulses, 2000)
df_trig_cleanPrompt = es.NoPromptClusters_WholeFile(
df_SinglePulses, df_trig_cleanSiPM, 2000)
print(
"TOTAL NUMBER OF EVENTS W/ ONE PULSE IN EACH SIPM AND NO PROMPT CLUSTER: "
+ str(len(set(df_trig_cleanPrompt['eventTimeTank']))))
#Late burst cut
df_trig_cleanWindow = es.NoBurst_WholeFile(df_cleanPrompt,
df_trig_cleanPrompt, 2000, 150)
print(
"TOTAL NUMBER OF EVENTS W/ CLEAN PROMPT AND NO BURST ABOVE 150 PE AND 2 MICROSECONDS: "
+ str(len(set(df_trig_cleanWindow['eventTimeTank']))))
def WMPlots(Sdf, Bdf, Sdf_trig, Bdf_trig):
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_CleanPrompt = es.NoPromptClusters(Sdf_SinglePulses, 2000)
Sdf_CleanWindow = es.NoBurstClusters(Sdf_CleanPrompt, 2000, 150)
Sdf_LateWindow = Sdf_CleanWindow.loc[(Sdf_CleanWindow["clusterTime"] >
2000)].reset_index(drop=True)
Sdf_trig_goodSiPM = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses'] == 1) & (
Sdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(
Sdf_SinglePulses, Sdf_trig_goodSiPM, 2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_CleanPrompt,
Sdf_trig_CleanPrompt, 2000,
150)
Bdf_SinglePulses = es.SingleSiPMPulses(Bdf)
Bdf_CleanPrompt = es.NoPromptClusters(Bdf_SinglePulses, 2000)
Bdf_CleanWindow = es.NoBurstClusters(Bdf_CleanPrompt, 2000, 150)
Bdf_LateWindow = Bdf_CleanWindow.loc[(Bdf_CleanWindow['clusterTime'] >
2000)].reset_index(drop=True)
Bdf_trig_cleanSiPM = Bdf_trig.loc[(Bdf_trig['SiPM1NPulses'] == 1) & (
Bdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Bdf_trig_cleanPrompt = es.NoPromptClusters_WholeFile(
Bdf_SinglePulses, Bdf_trig_cleanSiPM, 2000)
Bdf_trig_BurstCut = es.NoBurst_WholeFile(Bdf_CleanPrompt,
Bdf_trig_cleanPrompt, 2000, 150)
All_PE = np.hstack(Sdf_LateWindow['hitPE'])
All_T = np.hstack(Sdf_LateWindow['hitT'])
All_ID = np.hstack(Sdf_LateWindow['hitDetID'])
WM = np.where((All_ID == 382) | (All_ID == 393) | (All_ID == 404))[0]
LateTime = np.where(All_T > 12000)[0]
WMDelayed = np.intersect1d(LateTime, WM)
WM_PE = All_PE[WMDelayed]
plt.hist(WM_PE, bins=30, range=(0, 100))
plt.title(
"PE distribution for three WATCHMAN tubes in hit clusters \n (AmBe source data, all preliminary cuts)"
)
plt.xlabel("Hit PE")
plt.show()
#Sdf_Odd = Sdf.loc[(Sdf["clusterChargePointY"]>0.125)&(Sdf["clusterChargePointY"]<0.2)].reset_index(drop=True)
Sdf_Odd = Sdf.loc[(Sdf["clusterChargeBalance"] > 0.9)].reset_index(
drop=True)
HiCB_PE = np.hstack(Sdf_Odd.hitPE)
HiCB_DetID = np.hstack(Sdf_Odd.hitDetID)
plt.hist2d(HiCB_DetID,
HiCB_PE,
bins=(138, 20),
range=[(331, 469), (0, 20)],
cmap=plt.cm.inferno)
plt.colorbar()
plt.title(
"PE distribution for all hits in clusters \n (Central source, $t_{c}>2 \, \mu s$, CB>0.9)"
)
plt.xlabel("Tube ID")
plt.ylabel("PE")
plt.show()
#Sdf_Odd = Sdf.loc[(Sdf["clusterChargePointY"]>0.125)&(Sdf["clusterChargePointY"]<0.2)].reset_index(drop=True)
Sdf_Mid = Sdf.loc[(Sdf["clusterChargeBalance"] > 0.4)
& (Sdf["clusterChargeBalance"] < 0.6)].reset_index(
drop=True)
MidCB_PE = np.hstack(Sdf_Mid.hitPE)
MidCB_DetID = np.hstack(Sdf_Mid.hitDetID)
plt.hist2d(MidCB_DetID,
MidCB_PE,
bins=(138, 20),
range=[(331, 469), (0, 20)],
cmap=plt.cm.inferno)
plt.colorbar()
plt.title(
"PE distribution for all hits in clusters \n (Central source, $t_{c}>2 \, \mu s$, 0.4<CB<0.6)"
)
plt.xlabel("Tube ID")
plt.ylabel("PE")
plt.show()
Sdf_Lo = Sdf.loc[(Sdf["clusterChargeBalance"] < 0.4)].reset_index(
drop=True)
LoCB_PE = np.hstack(Sdf_Lo.hitPE)
LoCB_DetID = np.hstack(Sdf_Lo.hitDetID)
plt.hist2d(LoCB_DetID,
LoCB_PE,
bins=(138, 20),
range=[(331, 469), (0, 20)],
cmap=plt.cm.inferno)
plt.colorbar()
plt.title(
"PE distribution for all hits in clusters \n (Central source, $t_{c}>2 \, \mu s$, CB<0.4)"
)
plt.xlabel("Tube ID")
plt.ylabel("PE")
plt.show()
All_PE = np.hstack(Sdf_Odd['hitPE'])
All_T = np.hstack(Sdf_Odd['hitT'])
All_ID = np.hstack(Sdf_Odd['hitDetID'])
WM = np.where((All_ID == 382) | (All_ID == 393) | (All_ID == 404))[0]
LateTime = np.where(All_T > 12000)[0]
WMDelayed = np.intersect1d(LateTime, WM)
WM_PE = All_PE[WMDelayed]
plt.hist(WM_PE, bins=30, range=(0, 100))
plt.title(
"PE distribution for three WATCHMAN tubes in hit clusters \n (Source, 0.9 < CB < 1.0 clusters only"
)
plt.xlabel("Hit PE")
plt.show()
Sdf_rawLate = Sdf.loc[(Sdf["clusterTime"] > 2000)].reset_index(drop=True)
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Source, $t_{c}>2 \, \mu s$)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 40, 'ybins': 40, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist(Sdf_rawLate, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
labels = {
'title':
'Charge balance parameters in time window \n (Source, $t_{c}>2 \, \mu s$)',
'xlabel': 'Cluster time (ns)',
'ylabel': 'Charge balance'
}
ranges = {
'xbins': 40,
'ybins': 40,
'xrange': [2000, 67000],
'yrange': [0, 1]
}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist(Sdf_rawLate, 'clusterTime', 'clusterChargeBalance', labels,
ranges)
plt.show()
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Central source w/ preliminary cuts, $t_{c}>2 \, \mu s$)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 40, 'ybins': 40, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist(Sdf_LateWindow, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Central background, >2 $\mu$s)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
Bdf_latewindow = Bdf.loc[Bdf['clusterTime'] > 12000]
abp.Make2DHist(Bdf_latewindow, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Central background w\ preliminary cuts, >2 $\mu$s)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist(Bdf_LateWindow, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
#Apply late window and charge balance cuts for data cleaning
Bdf_latewindow = Bdf.loc[Bdf['clusterTime'] > 12000]
Sdf_CleanPromptCB = Sdf_CleanPrompt.loc[
Sdf_CleanPrompt['clusterChargeBalance'] < 0.4].reset_index(drop=True)
def PlotDemo(Sdf, Bdf, Sdf_trig, Bdf_trig):
print("EVENT SELECTION LOSSES FOR CENTRAL SOURCE RUN")
EventSelectionLosses(Sdf, Sdf_trig)
print("EVENT SELECTION LOSSES FOR BKG CENTRAL SOURCE RUN")
EventSelectionLosses(Bdf, Bdf_trig)
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_CleanPrompt = es.NoPromptClusters(Sdf_SinglePulses, 2000)
Sdf_CleanWindow = es.NoBurstClusters(Sdf_CleanPrompt, 2000, 150)
Sdf_CleanWindow_CBClean = Sdf_CleanWindow.loc[
Sdf_CleanWindow['clusterChargeBalance'] < 0.4]
Sdf_trig_goodSiPM = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses'] == 1) & (
Sdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(
Sdf_SinglePulses, Sdf_trig_goodSiPM, 2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_CleanPrompt,
Sdf_trig_CleanPrompt, 2000,
150)
#Line of cuts applied to background clusters
Bdf_SinglePulses = es.SingleSiPMPulses(Bdf)
Bdf_CleanPrompt = es.NoPromptClusters(Bdf_SinglePulses, 2000)
Bdf_CleanWindow = es.NoBurstClusters(Bdf_CleanPrompt, 2000, 150)
Bdf_latewindow = Bdf_CleanWindow.loc[(Bdf_CleanWindow['clusterTime'] >
2000)].reset_index(drop=True)
Bdf_latewindow = Bdf_latewindow.loc[(Bdf_latewindow['clusterChargeBalance']
< 0.4)].reset_index(drop=True)
Bdf_trig_cleanSiPM = Bdf_trig.loc[(Bdf_trig['SiPM1NPulses'] == 1) & (
Bdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Bdf_trig_cleanPrompt = es.NoPromptClusters_WholeFile(
Bdf_SinglePulses, Bdf_trig_cleanSiPM, 2000)
Bdf_trig_BurstCut = es.NoBurst_WholeFile(Bdf_CleanPrompt,
Bdf_trig_cleanPrompt, 2000, 150)
#Special case
Bdf_NoBurstLateWindow = es.NoBurstClusters(Bdf_SinglePulses, 12000, 150)
Bdf_NBlatewindow = Bdf_NoBurstLateWindow.loc[(
Bdf_NoBurstLateWindow['clusterTime'] > 12000)].reset_index(drop=True)
Bdf_NBCBCut = Bdf_NBlatewindow.loc[
Bdf_NBlatewindow['clusterChargeBalance'] < 0.4].reset_index(drop=True)
#Get prompt clusters within a 100 ns window of the mean SiPM single pulse time
Sdf_SPPrompt = es.SiPMCorrelatedPrompts(Sdf_SinglePulses, 100, 1000, 2000)
print("NUMBER OF PROMPT CLUSTERS PASSING SINGLE SIPM PULSE CUTS: " +
str(len(Sdf_SinglePulses.eventTimeTank)))
Sdf_SPPrompt = Sdf_SPPrompt.loc[
Sdf_SPPrompt['clusterChargeBalance'] < 0.4].reset_index(drop=True)
Sdf_SPPrompt_trig = es.SiPMCorrelatedPrompts_WholeFile(
Sdf_SPPrompt, Sdf_trig)
print("NUMBER OF PROMPT CLUSTERS PASSING CORRELATED PROMPT CUTS: " +
str(len(Sdf_SPPrompt.eventTimeTank)))
print("NUMBER OF TRIGS WITH AT LEAST ONE CORRELATED PROMPT: " +
str(len(Sdf_SPPrompt_trig.eventTimeTank)))
MSData = abp.MakeClusterMultiplicityPlot(Sdf_SPPrompt, Sdf_SPPrompt_trig)
#s_bins, s_edges = np.histogram(MSData,bins=20, range=(0,20))
#plt.hist(MSData,bins=20, range=(0,20), label="Source",alpha=0.7)
plt.hist(MSData, bins=100, label="Source", alpha=0.7)
plt.xlabel("False start candidate cluster multiplicity")
plt.title(
"Cluster multiplicity of false starts in source data \n (One pulse each SiPM, cluster within prompt window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
S1Delta, S2Delta = abp.SiPMClusterDifferences(Sdf_SPPrompt, 100)
plt.hist(S1Delta, bins=100, label="S1Time-clusterTime", alpha=0.7)
plt.hist(S2Delta, bins=100, label="S2Time-clusterTime", alpha=0.7)
plt.xlabel("SiPM time - Cluster time (ns)")
plt.title(
"Difference between SiPM peak time and cluster time \n (One pulse each SiPM, cluster within prompt window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
Sdf_SPPromptLoPE = Sdf_SPPrompt.loc[
Sdf_SPPrompt['clusterPE'] < 80].reset_index(drop=True)
print(
"NUMBER OF PROMPT CLUSTERS PASSING CORRELATED PROMPT CUTS LT 80 PE: " +
str(len(Sdf_SPPromptLoPE.eventTimeTank)))
NumTrigs = len(set(Sdf_SPPromptLoPE.eventNumber))
print(
"NUMBER OF TRIGS WITH A PASSING CORRELATED PROMPT CUTS CLUSTER LT 80 PE: "
+ str(NumTrigs))
labels = {
'title':
'Comparison of cluster PE to total SiPM Charge \n (Position 0, AmBe source installed)',
'xlabel': 'Cluster PE',
'ylabel': 'Total SiPM charge [nC]'
}
ranges = {
'xbins': 30,
'ybins': 40,
'xrange': [0, 60],
'yrange': [0, 0.5],
'promptTime': 2000
}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist_PEVsQ(Sdf_SPPrompt, labels, ranges)
plt.show()
plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),
bins=30,
range=(0, 80),
alpha=0.5,
histtype='stepfilled',
linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),
bins=30,
range=(0, 80),
alpha=0.75,
histtype='step',
linewidth=6,
color='green')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"False start candidate PE distribution (AmBe central source data)")
plt.xlabel("Cluster PE")
plt.show()
Sdf_SPPrompt_10N = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterHits'] ==
10].reset_index(drop=True)
Sdf_SPPrompt_11N = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterHits'] ==
11].reset_index(drop=True)
Sdf_SPPrompt_12N = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterHits'] ==
12].reset_index(drop=True)
Sdf_SPPrompt_8N = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterHits'] ==
8].reset_index(drop=True)
Sdf_SPPrompt_9N = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterHits'] ==
9].reset_index(drop=True)
#plt.hist(np.hstack(Sdf_SPPrompt_10N['clusterPE']),bins=30,range=(0,80),alpha=0.5,histtype='stepfilled',linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt_8N['clusterPE']),
bins=30,
range=(0, 80),
label='8 hits',
alpha=0.75,
histtype='step',
linewidth=6,
color='green')
plt.hist(np.hstack(Sdf_SPPrompt_9N['clusterPE']),
bins=30,
range=(0, 80),
label='9 hits',
alpha=0.75,
histtype='step',
linewidth=6,
color='black')
plt.hist(np.hstack(Sdf_SPPrompt_10N['clusterPE']),
bins=30,
range=(0, 80),
label='10 hits',
alpha=0.75,
histtype='step',
linewidth=6,
color='blue')
#plt.hist(np.hstack(Sdf_SPPrompt_11N['clusterPE']),bins=30,range=(0,80),alpha=0.5,histtype='stepfilled',linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt_11N['clusterPE']),
bins=30,
range=(0, 80),
label='11 hits',
alpha=0.75,
histtype='step',
linewidth=6,
color='red')
#plt.hist(np.hstack(Sdf_SPPrompt_12N['clusterPE']),bins=30,range=(0,80),alpha=0.5,histtype='stepfilled',linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt_12N['clusterPE']),
bins=30,
range=(0, 80),
label='12 hits',
alpha=0.75,
histtype='step',
linewidth=6,
color='purple')
#plt.hist(np.hstack(Sdf_SPPrompt_8N['clusterPE']),bins=30,range=(0,80),alpha=0.5,histtype='stepfilled',linewidth=6)
#plt.hist(np.hstack(Sdf_SPPrompt_9N['clusterPE']),bins=30,range=(0,80),alpha=0.5,histtype='stepfilled',linewidth=6)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Cluster PE distribution for clusters of varying nhit")
plt.xlabel("Cluster PE")
plt.show()
labels = {
'title': "Amplitude of SiPM1 hits",
'xlabel': 'Pulse amplitude [V]',
'llabel': 'SiPM1'
}
ranges = {'bins': 160, 'range': (0, 0.3)}
abp.MakeSiPMVariableDistribution(Sdf_trig_goodSiPM, "SiPMhitAmplitude", 1,
labels, ranges, True)
labels = {
'title': "Amplitude of SiPM hits (Runs 1594-1596)",
'xlabel': 'Pulse amplitude [V]',
'llabel': 'SiPM2'
}
abp.MakeSiPMVariableDistribution(Sdf_trig_goodSiPM, "SiPMhitAmplitude", 2,
labels, ranges, False)
plt.show()
labels = {
'title': "Total charge of SiPM1 hits",
'xlabel': 'Pulse charge [nC]',
'llabel': 'SiPM1'
}
ranges = {'bins': 250, 'range': (0, 5.0)}
abp.MakeSiPMVariableDistribution(Sdf_trig_goodSiPM, "SiPMhitQ", 1, labels,
ranges, True)
labels = {
'title': "Total Charge of SiPM hits (Runs 1594-1596)",
'xlabel': 'Pulse charge [nC]',
'llabel': 'SiPM2'
}
abp.MakeSiPMVariableDistribution(Sdf_trig_goodSiPM, "SiPMhitQ", 2, labels,
ranges, False)
plt.show()
labels = {
'title': "Amplitude of SiPM1 hits (No Source)",
'xlabel': 'Pulse amplitude [V]',
'llabel': 'SiPM1'
}
ranges = {'bins': 160, 'range': (0, 0.3)}
abp.MakeSiPMVariableDistribution(Bdf_trig_cleanSiPM, "SiPMhitAmplitude", 1,
labels, ranges, True)
labels = {
'title': "Amplitude of SiPM hits (Runs 1611-1612)",
'xlabel': 'Pulse amplitude [V]',
'llabel': 'SiPM2'
}
abp.MakeSiPMVariableDistribution(Bdf_trig_cleanSiPM, "SiPMhitAmplitude", 2,
labels, ranges, False)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
labels = {
'title': "Charge of SiPM hits (No Source)",
'xlabel': 'Pulse charge [nC]',
'llabel': 'SiPM1'
}
ranges = {'bins': 250, 'range': (0, 5.0)}
abp.MakeSiPMVariableDistribution(Bdf_trig_cleanSiPM, "SiPMhitQ", 1, labels,
ranges, True)
labels = {
'title': "Total charge of SiPM hits (Runs 1611-1612)",
'xlabel': 'Pulse charge [nC]',
'llabel': 'SiPM2'
}
abp.MakeSiPMVariableDistribution(Bdf_trig_cleanSiPM, "SiPMhitQ", 2, labels,
ranges, False)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
labels = {
'title': "Sum of SiPM Charges (Source)",
'xlabel': 'Total SiPM charge [nC]',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Sdf_trig_goodSiPM, "SiPMhitQ", labels, ranges)
plt.show()
labels = {
'title': "Sum of SiPM Charges (No Source)",
'xlabel': 'Total SiPM charge [nC]',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Bdf_trig_cleanSiPM, "SiPMhitQ", labels, ranges)
plt.show()
labels = {
'title': "Sum of SiPM Charges (Source, all preliminary cuts applied)",
'xlabel': 'Total SiPM charge [nC]',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Sdf_trig_CleanWindow, "SiPMhitQ", labels, ranges)
plt.show()
labels = {
'title':
"Sum of SiPM Charges (No Source, all preliminary cuts applied)",
'xlabel': 'Total SiPM charge [nC]',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Bdf_trig_BurstCut, "SiPMhitQ", labels, ranges)
plt.show()
labels = {
'title': "Sum of SiPM Charges \n (Single SiPM pulse cut only)",
'xlabel': 'Total SiPM charge [nC]',
'llabel': 'Source data',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Sdf_trig_goodSiPM, "SiPMhitQ", labels, ranges)
labels = {
'title': "Sum of SiPM Charges \n (Single SiPM pulse cut only)",
'xlabel': 'Total SiPM charge [nC]',
'llabel': 'Background data',
'ylabel': 'Number of acquisitions'
}
abp.SiPMVariableSum(Bdf_trig_cleanSiPM, "SiPMhitQ", labels, ranges)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
labels = {
'title': "Sum of SiPM Charges \n (All preliminary cuts applied)",
'xlabel': 'Total SiPM charge [nC]',
'llabel': 'Source data',
'ylabel': 'Number of acquisitions'
}
ranges = {'bins': 200, 'range': (0, 10.0)}
abp.SiPMVariableSum(Sdf_trig_CleanWindow, "SiPMhitQ", labels, ranges)
labels = {
'title': "Sum of SiPM Charges \n (All preliminary cuts applied)",
'xlabel': 'Total SiPM charge [nC]',
'llabel': 'Background data',
'ylabel': 'Number of acquisitions'
}
abp.SiPMVariableSum(Bdf_trig_BurstCut, "SiPMhitQ", labels, ranges)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.hist(np.hstack(Sdf_SinglePulses['SiPMhitT']),
bins=30,
range=(0, 1500),
alpha=0.5,
histtype='stepfilled',
linewidth=6)
plt.hist(np.hstack(Sdf_SinglePulses['SiPMhitT']),
bins=30,
range=(0, 1500),
alpha=0.75,
histtype='step',
linewidth=6)
plt.title("Distribution of pulse peak times for SiPMs (Prompt window)")
plt.xlabel("Peak time [ns]")
plt.show()
#plt.hist(Sdf_SinglePulses['clusterTime'],,bins=30,range=(0,1500),alpha=0.5,histtype='stepfilled',linewidth=6)
#plt.hist(np.hstack(Sdf_SinglePulses['SiPMhitT']),bins=30,range=(0,1500),alpha=0.75,histtype='step',linewidth=6)
plt.hist(Bdf_SinglePulses['clusterTime'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Bdf_SinglePulses['clusterTime'],
70,
label='No source',
alpha=0.8,
histtype='step',
linewidth=6)
plt.hist(Sdf_SinglePulses['clusterTime'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Sdf_SinglePulses['clusterTime'],
70,
label='Source',
alpha=0.8,
histtype='step',
linewidth=6)
plt.xlabel("Cluster time (ns)")
plt.ylabel("Number of clusters")
plt.title(
"Time distribution of all hit clusters \n AmBe data, (SiPM cut only, central deployment position)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.hist(Bdf_CleanWindow['clusterTime'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Bdf_CleanWindow['clusterTime'],
70,
label='No source',
alpha=0.8,
histtype='step',
linewidth=6)
plt.hist(Sdf_CleanWindow['clusterTime'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Sdf_CleanWindow['clusterTime'],
70,
label='Source',
alpha=0.8,
histtype='step',
linewidth=6)
plt.xlabel("Neutron candidate time (ns)")
plt.ylabel("Number of candidates")
plt.title(
"Time distribution of neutron candidates \n (All preliminary cuts applied, central AmBe data)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.hist(Sdf_CleanWindow['clusterTime'],
35,
range=(15000, 65000),
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Sdf_CleanWindow['clusterTime'],
35,
range=(15000, 65000),
label='Source data',
alpha=0.8,
histtype='step',
linewidth=6)
hist, bin_edges = np.histogram(Sdf_CleanWindow['clusterTime'],
35,
range=(15000, 65000))
bin_lefts = bin_edges[0:len(bin_edges) - 1]
print(len(hist))
print(len(bin_lefts))
bin_width = bin_lefts[1] - bin_lefts[0]
bin_centers = bin_lefts + bin_width / 2.
#try making some nice bins
init_params = [200, 30000, 10000, 10]
popt, pcov = scp.curve_fit(expoPFlat,
bin_centers,
hist,
p0=init_params,
maxfev=6000)
print("WE HERE")
print(popt)
print(pcov)
myy = expoPFlat(bin_centers, popt[0], popt[1], popt[2], popt[3])
myy_line = np.ones(len(bin_centers)) * popt[3]
tau_mean = int(popt[1] / 1000)
tau_unc = int(np.sqrt(pcov[1][1]) / 1000)
plt.plot(bin_centers,
myy,
marker='None',
linewidth=6,
label=r'Best total fit $\tau = %i\pm%i \mu s$' %
(tau_mean, tau_unc),
color='black')
plt.plot(bin_centers,
myy_line,
marker='None',
linewidth=6,
label=r'Flat bkg. fit',
color='gray')
plt.xlabel("Neutron candidate time (ns)")
plt.ylabel("Number of candidates")
plt.title(
"Time distribution of neutron candidates \n (All preliminary cuts applied, AmBe central source data)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Calculate chi^2/ndof
chisq = np.sum(((hist - myy)**2) / hist)
ndof = np.size(hist)
print("CHISQ/NDOF: %s/%s" % (str(chisq), str(ndof)))
#Find the baseline with the bin resolution used in Vincent's plot
plt.hist(Sdf_CleanWindow['clusterTime'],
75,
range=(15000, 65000),
alpha=0.8)
plt.show()
plt.hist(Sdf_CleanWindow['clusterTime'],
75,
range=(15000, 65000),
alpha=0.8)
dhist, dbin_edges = np.histogram(Sdf_CleanWindow['clusterTime'],
75,
range=(15000, 65000))
dbin_lefts = dbin_edges[0:len(dbin_edges) - 1]
dbin_width = dbin_lefts[1] - dbin_lefts[0]
dbin_centers = dbin_lefts + dbin_width / 2.
init_params = [40, 30000, 15000, 5]
popt, pcov = scp.curve_fit(expoPFlat,
dbin_centers,
dhist,
p0=init_params,
maxfev=6000)
print("WE ARE HERE")
print(popt)
print(pcov)
myy = expoPFlat(dbin_centers, popt[0], popt[1], popt[2], popt[3])
myy_line = np.ones(len(dbin_centers)) * popt[3]
flat_bkg = popt[3]
tau_mean = int(popt[1] / 1000)
tau_unc = int(np.sqrt(pcov[1][1]) / 1000)
plt.plot(dbin_centers,
myy,
marker='None',
linewidth=6,
label=r'Best total fit $\tau = %i\pm%i \mu s$' %
(tau_mean, tau_unc),
color='black')
plt.plot(dbin_centers,
myy_line,
marker='None',
linewidth=6,
label=r'Flat bkg. fit',
color='gray')
plt.xlabel("Cluster time (ns)")
plt.ylabel("Number of clusters")
plt.title(
"Time distribution of delayed hit clusters (MCBins) \n (One pulse in each SiPM, no prompt cluster)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Get MC
#mchist,mcbin_lefts = fr.ReadHistFile(MCDELTAT)
#mcrange = np.where(mcbin_lefts<70100)[0]
#mchist = mchist[mcrange]
#mcbin_lefts = mcbin_lefts[mcrange]
mchist, mcbin_lefts = fr.ReadHistFileSimple(MCDELTAT)
print(mchist)
print(mcbin_lefts)
mchist, mcbin_lefts = hu.AggregateBins(mchist, mcbin_lefts, 100, 0, 67000)
mchist_unc = np.sqrt(mchist)
mchist_normed = mchist / np.sum(mchist)
mchist_normed_unc = mchist_unc / np.sum(mchist)
#Plot data over MC range, subtract baseline
dhist, dbin_edges = np.histogram(Sdf_CleanWindow['clusterTime'],
100,
range=(0, 67000))
dbin_lefts = dbin_edges[0:len(dbin_edges) - 1]
dhist_nobkg = dhist - popt[3]
#dhist_nobkg = dhist
neg_bins = np.where(dhist_nobkg < 0)[0]
dhist_nobkg[neg_bins] = 0
dhist_nobkg_unc = np.sqrt(
dhist_nobkg) #TODO: could propagate uncertainty on flat fit too
dhist_nobkg_normed = dhist_nobkg / np.sum(dhist_nobkg)
dhist_nobkg_normed_unc = dhist_nobkg_unc / np.sum(dhist_nobkg)
plt.errorbar(dbin_lefts,
dhist_nobkg_normed,
yerr=dhist_nobkg_normed_unc,
linestyle='None',
marker='o',
label='AmBe source data')
plt.errorbar(mcbin_lefts,
mchist_normed,
yerr=mchist_normed_unc,
marker='o',
linestyle='None',
label='RATPAC MC')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"Comparison of neutron candidate time distribution in central data/MC")
plt.xlabel("Neutron candidate time (ns)")
plt.ylabel("Arb. units")
plt.show()
#CleanEventNumbers = Sdf_CleanPrompt["eventNumber"]
#Return DF with triggers that have no prompt and one of each SiPM pulse
#MSData = abp.MakeClusterMultiplicityPlot(Sdf_CleanPrompt,Sdf_trig_CleanPrompt)
MSData = abp.MakeClusterMultiplicityPlot(Sdf_CleanWindow_CBClean,
Sdf_trig_CleanWindow)
print("NUMBER OF TRIGS: " + str(len(MSData)))
print("NUMBER OF ZERO MULTIPLICITY TRIGS: " +
str(len(np.where(MSData == 0)[0])))
s_bins, s_edges = np.histogram(MSData, bins=20, range=(0, 20))
print("SIGNAL_BINS: " + str(s_bins))
print("SIGNAL_BIN_EDGES: " + str(s_edges))
plt.hist(MSData, bins=20, range=(0, 20), label="Source", alpha=0.7)
plt.xlabel("Delayed cluster multiplicity")
plt.title(
"Cluster multiplicity for delayed window of central source run \n (One pulse each SiPM, no prompt cluster)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.hist(Bdf_NBCBCut['clusterTime'],
100,
range=(12000, 65000),
label='No source',
color='purple',
alpha=0.7)
#plt.hist(Bdf_SinglePulses['clusterTime'],100,label='No source', color='purple',alpha=0.7)
plt.xlabel("Cluster time (ns)")
plt.ylabel("Number of candidates")
plt.title(
"Region to characterize flat background distribution \n (No source data, SiPM cut + Burst cut)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
Bdf_trig_goodSiPM = Bdf_trig.loc[(Bdf_trig['SiPM1NPulses'] == 1) & (
Bdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Bdf_trig_CleanWindow = es.NoBurst_WholeFile(Bdf_SinglePulses,
Bdf_trig_goodSiPM, 12000, 150)
#Bdf_trig_bkgclean = es.FilterByEventNumber(Bdf_trig,CleanBkgNumbers)
#Get cluster multiplicity of late window in events passing prompt criteria
MBData = abp.MakeClusterMultiplicityPlot(Bdf_NBCBCut, Bdf_trig_CleanWindow)
MBData = abp.MakeClusterMultiplicityPlot(Bdf_latewindow, Bdf_trig_BurstCut)
print("NUMBER OF TRIGS: " + str(len(MBData)))
print("NUMBER OF ZERO MULTIPLICITY TRIGS (LATE WINDOW): " +
str(len(np.where(MBData == 0)[0])))
b_bins, b_edges = np.histogram(MBData, bins=20, range=(0, 20))
print("BKG_BINS: " + str(b_bins))
print("BKG_BIN_EDGES: " + str(b_edges))
plt.hist(MBData, bins=20, range=(0, 20), label="No source", alpha=0.7)
plt.xlabel("Delayed cluster multiplicity")
plt.ylabel("Number of acquisitions")
plt.title(
"Cluster multiplicity for delayed window of central source run \n (One pulse each SiPM, no prompt cluster)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Plotting the PE distribution
Sdf_latewindow = Sdf_SinglePulses.loc[(Sdf_SinglePulses['clusterTime'] >
2000)].reset_index(drop=True)
plt.hist(Sdf_CleanWindow['clusterPE'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Sdf_CleanWindow['clusterPE'],
70,
label='Source ($>2 \, \mu s$)',
alpha=0.8,
histtype='step',
linewidth=6)
plt.hist(Bdf_NBCBCut['clusterPE'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Bdf_NBCBCut['clusterPE'],
70,
label='No source ($>12 \, \mu s$)',
alpha=0.8,
histtype='step',
linewidth=6)
plt.xlabel("PE")
plt.ylabel("Number of clusters")
plt.title(
"PE distribution for delayed clusters \n (SiPM cut only, AmBe central data"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Get MC
#mchist,mcbin_lefts = fr.ReadHistFile(MCPE)
mchist, mcbin_lefts = fr.ReadHistFileSimple(MCPE)
mchist, mcbin_lefts = hu.AggregateBins(mchist, mcbin_lefts, 75, 0, 150)
mchist_normed = mchist / np.sum(mchist)
mchist_unc = np.sqrt(mchist)
mchist_normed_unc = mchist_unc / np.sum(mchist)
#Plot data over MC range, subtract baseline
dhist, dbin_edges = np.histogram(Sdf_CleanWindow['clusterPE'],
75,
range=(0, 150))
dbin_lefts = dbin_edges[0:len(dbin_edges) - 1]
dhist_unc = np.sqrt(
dhist) #TODO: could propagate uncertainty on flat fit too
dhist_normed = dhist / np.sum(dhist)
dhist_normed_unc = dhist_unc / np.sum(dhist)
plt.errorbar(dbin_lefts,
dhist_normed,
yerr=dhist_normed_unc,
linestyle='None',
marker='o',
label='AmBe source data')
plt.errorbar(mcbin_lefts,
mchist_normed,
yerr=mchist_normed_unc,
marker='o',
linestyle='None',
label='RATPAC MC')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"Comparison of neutron candidate PE distribution in central data/MC")
plt.xlabel("Neutron candidate PE")
plt.ylabel("Arb. units")
plt.show()
#Same as above, but plotting past 25 PE
mchist, mcbin_lefts = fr.ReadHistFileSimple(MCPE)
mchist, mcbin_lefts = hu.AggregateBins(mchist, mcbin_lefts, 70, 20, 160)
mchist_normed = mchist / np.sum(mchist)
mchist_unc = np.sqrt(mchist)
mchist_normed_unc = mchist_unc / np.sum(mchist)
dhist, dbin_edges = np.histogram(Sdf_CleanWindow['clusterPE'],
70,
range=(20, 160))
dbin_lefts = dbin_edges[0:len(dbin_edges) - 1]
dhist_unc = np.sqrt(dhist)
dhist_normed = dhist / np.sum(dhist)
dhist_normed_unc = dhist_unc / np.sum(dhist)
plt.errorbar(dbin_lefts,
dhist_normed,
yerr=dhist_normed_unc,
linestyle='None',
marker='o',
label='AmBe source data')
plt.errorbar(mcbin_lefts,
mchist_normed,
yerr=mchist_normed_unc,
marker='o',
linestyle='None',
label='RATPAC MC')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"Comparison of neutron candidate PE distribution in central data/MC \n (Preliminary cuts applied except CB cut)"
)
plt.xlabel("Neutron candidate PE")
plt.ylabel("Arb. units")
plt.show()
#Plotting the PE distribution
Bdf_latewindow_CBClean = Bdf_NBlatewindow.loc[
Bdf_NBlatewindow['clusterChargeBalance'] < 0.4]
Sdf_CleanWindow_CBClean = Sdf_CleanWindow.loc[
Sdf_CleanWindow['clusterChargeBalance'] < 0.4]
plt.hist(Sdf_CleanWindow_CBClean['clusterPE'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Sdf_CleanWindow_CBClean['clusterPE'],
70,
label='Source ($>2 \, \mu s$)',
alpha=0.8,
histtype='step',
linewidth=6)
plt.hist(Bdf_latewindow_CBClean['clusterPE'],
70,
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(Bdf_latewindow_CBClean['clusterPE'],
70,
label='No source \n (No tank cut, $>12 \, \mu s$ clusters)',
alpha=0.8,
histtype='step',
linewidth=6)
plt.xlabel("PE")
plt.ylabel("Number of clusters")
plt.title(
"PE distribution for delayed clusters \n (All preliminary cuts applied, AmBe central runs)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Position 0, AmBe source installed)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist(Sdf_CleanWindow, 'clusterPE', 'clusterChargeBalance',
labels, ranges)
plt.show()
labels = {
'title':
'Comparison of total PE to charge balance parameter \n (Position 0, no AmBe source installed, >12 $\mu$s)',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 80], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
Bdf_latewindow = Bdf.loc[Bdf['clusterTime'] > 12000]
abp.Make2DHist(Bdf_latewindow, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
labels = {
'title': 'Comparison of total PE to charge balance parameter',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter',
'llabel': 'No source',
'color': 'Reds'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 150], 'yrange': [0, 1]}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
Bdf_window = Bdf_latewindow.loc[(Bdf_latewindow['clusterPE']<150) & \
(Bdf_latewindow['clusterChargeBalance']>0) & (Bdf_latewindow['clusterChargeBalance']<1)]
Sdf_window = Sdf_CleanWindow.loc[(Sdf_CleanWindow['clusterPE']<150) & \
(Sdf_CleanWindow['clusterChargeBalance']>0) & (Sdf_CleanWindow['clusterChargeBalance']<1)]
abp.MakeKDEPlot(Bdf_window, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
labels = {
'title': 'Comparison of total PE to charge balance parameter',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter',
'llabel': 'No source',
'color': 'Blues'
}
abp.MakeKDEPlot(Sdf_window, 'clusterPE', 'clusterChargeBalance', labels,
ranges)
plt.show()
def PlotDemo(Sdf, Sdf_trig):
#Cuts can be applied to pandas dataframes; EventSelection.py has some cuts defined,
#And some are directly applied here as well. Examples of applying cuts at both the
#Cluster level and trigger level are shown.
#Cluster level cuts
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_PlusCleanSiPMPrompt = es.NoPromptClusters(Sdf_SinglePulses, 2000)
Sdf_PlusNoHighPEClusters = es.NoBurstClusters(Sdf_PlusCleanSiPMPrompt,
2000, 150)
Sdf_PlusGoodCB = Sdf_PlusNoHighPEClusters.loc[
Sdf_PlusNoHighPEClusters['clusterChargeBalance'] < 0.4]
#Trigger level cuts
Sdf_trig_goodSiPM = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses'] == 1) & (
Sdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(
Sdf_SinglePulses, Sdf_trig_goodSiPM, 2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_PlusCleanSiPMPrompt,
Sdf_trig_CleanPrompt, 2000,
150)
Sdf_clean = Sdf_PlusGoodCB
Sdf_trig_clean = Sdf_trig_CleanWindow
#Access hit information in first cluster
print(np.array(Sdf_clean['hitX'][0]))
print(np.array(Sdf_clean['hitY'][0]))
print(np.array(Sdf_clean['hitZ'][0]))
print(np.array(Sdf_clean['hitT'][0]))
print(np.array(Sdf_clean['hitQ'][0]))
print(np.array(Sdf_clean['hitPE'][0]))
#Example of how to filter and only show hits in front-half of tank
front_hits = np.where(np.array(Sdf_clean['hitZ'][0]) > 0)[0]
print(np.array(Sdf_clean['hitX'][0])[front_hits])
print(np.array(Sdf_clean['hitY'][0])[front_hits])
print(np.array(Sdf_clean['hitZ'][0])[front_hits])
print(np.array(Sdf_clean['hitT'][0])[front_hits])
print(np.array(Sdf_clean['hitPE'][0])[front_hits])
#Access some cluster-level information for all clusters and of first cluster
print(Sdf_clean['clusterPE'])
print(Sdf_clean['clusterPE'][0])
print(Sdf_clean['clusterChargeBalance'])
print(Sdf_clean['clusterChargeBalance'][0])
#Simple 1D histogram; plot total PE of all clusters
plt.hist(Sdf_clean['clusterPE'],
bins=30,
range=(0, 80),
alpha=0.75,
histtype='stepfilled',
linewidth=6,
color='blue')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Cluster PE distribution ")
plt.xlabel("Cluster PE")
plt.ylabel("Number of clusters")
plt.show()
#Simple 1D histogram; PE distribution of all hits in all clusters
plt.hist(np.hstack(Sdf_clean['hitPE']),
bins=120,
range=(0, 40),
alpha=0.75,
histtype='stepfilled',
linewidth=6,
color='blue')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Hit PE distribution")
plt.xlabel("Hit PE")
plt.ylabel("Number of hits")
plt.show()
#Simple 1D histogram; the exact same plot as above, but I think the step & stepfilled
#Combo looks nice!
plt.hist(np.hstack(Sdf_clean['hitPE']),
bins=120,
range=(0, 40),
histtype='step',
linewidth=6,
color='blue')
plt.hist(np.hstack(Sdf_clean['hitPE']),
bins=120,
range=(0, 40),
histtype='stepfilled',
linewidth=6,
color='blue',
alpha=0.6)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Hit PE distribution")
plt.xlabel("Hit PE")
plt.ylabel("Number of hits")
plt.show()
#Simple 2D histogram
labels = {
'title': 'Charge balance parameter as a function of cluster PE',
'xlabel': 'Total PE',
'ylabel': 'Charge balance parameter'
}
ranges = {'xbins': 50, 'ybins': 50, 'xrange': [0, 80], 'yrange': [0, 1]}
variables = {'x': 'clusterPE', 'y': 'clusterChargeBalance'}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
plt.hist2d(Sdf_clean[variables['x']],
Sdf_clean[variables['y']],
bins=(ranges['xbins'], ranges['ybins']),
range=[ranges['xrange'], ranges['yrange']],
cmap=plt.cm.inferno)
plt.colorbar()
plt.title(labels['title'])
plt.xlabel(labels['xlabel'])
plt.ylabel(labels['ylabel'])
plt.show()
flist = glob.glob(SIGNAL_DIR+"*.ntuple.root")
mybranches = ['eventNumber','eventTimeTank','clusterTime','clusterChargeBalance','SiPMNum','SiPMhitT','hitX','hitY','hitZ','hitT','hitQ','hitPE','hitDetID','SiPM1NPulses','SiPM2NPulses','clusterPE']
SProcessor = rp.ROOTProcessor(treename="phaseIITankClusterTree")
for f1 in flist:
SProcessor.addROOTFile(f1,branches_to_get=mybranches)
Sdata = SProcessor.getProcessedData()
Sdf = pd.DataFrame(Sdata)
SProcessor = rp.ROOTProcessor(treename="phaseIITriggerTree")
for f1 in flist:
SProcessor.addROOTFile(f1,branches_to_get=mybranches)
Sdata = SProcessor.getProcessedData()
Sdf_trig = pd.DataFrame(Sdata)
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_CleanPrompt = es.NoPromptClusters(Sdf_SinglePulses,2000)
Sdf_CleanWindow = es.NoBurstClusters(Sdf_CleanPrompt,2000,150)
Sdf_LateWindow = Sdf_CleanWindow.loc[(Sdf_CleanWindow["clusterTime"]>2000)].reset_index(drop=True)
Sdf_trig_goodSiPM = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses']==1) & (Sdf_trig['SiPM2NPulses']==1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(Sdf_SinglePulses,Sdf_trig_goodSiPM,2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_CleanPrompt,Sdf_trig_CleanPrompt,2000,150)
Sdf_Mid = Sdf_SinglePulses.loc[(Sdf_SinglePulses["clusterChargeBalance"]>0.4)&(Sdf_SinglePulses["clusterChargeBalance"]<0.6)].reset_index(drop=True)
Sdf_Lo = Sdf_SinglePulses.loc[(Sdf_SinglePulses["clusterChargeBalance"]<0.4)].reset_index(drop=True)
enums = np.arange(10,20,1)
for j in enums:
hp.YVSTheta(Sdf_Lo,j,'hitT','Hit Times (ns)')
hp.YVSTheta(Sdf_Lo,j,'hitPE','Hit PE count')
hp.YVSTheta_Nhit(Sdf_Lo,j)
def EstimateNeutronEfficiency(Sdf, Bdf, Sdf_trig, Bdf_trig):
#First, apply event selection cuts to background data an dform background multiplicity model
Bdf_SinglePulses = es.SingleSiPMPulses(Bdf)
Bdf_CleanPrompt = es.NoPromptClusters(Bdf_SinglePulses, 2000)
Bdf_BurstCut = es.NoBurstClusters(Bdf_CleanPrompt, BKG_WINDOW_START, 150)
Bdf_latewindow = Bdf_BurstCut.loc[(
Bdf_BurstCut['clusterTime'] > BKG_WINDOW_START)].reset_index(drop=True)
Bdf_latewindow = Bdf_latewindow.loc[(Bdf_latewindow['clusterChargeBalance']
< 0.4)].reset_index(drop=True)
Bdf_trig_cleanSiPM = Bdf_trig.loc[(Bdf_trig['SiPM1NPulses'] == 1) & (
Bdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Bdf_trig_cleanPrompt = es.NoPromptClusters_WholeFile(
Bdf_SinglePulses, Bdf_trig_cleanSiPM, 2000)
Bdf_trig_BurstCut = es.NoBurst_WholeFile(Bdf_CleanPrompt,
Bdf_trig_cleanPrompt,
BKG_WINDOW_START, 150)
MBData = abp.MakeClusterMultiplicityPlot(Bdf_latewindow, Bdf_trig_BurstCut)
plt.hist(MBData,
bins=20,
range=(0, 20),
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(MBData, bins=20, range=(0, 20), histtype='step', linewidth=6)
plt.xlabel("Delayed neutron candidate multiplicity")
plt.ylabel("Number of acquisitions")
plt.title(
"Neutron candidate multiplicity, AmBe central background run \n (All preliminary cuts, [2,67] $\mu s$ window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
print("MBData:" + str(MBData))
Bbins, Bbin_edges = np.histogram(MBData, range=(0, 5), bins=5)
print("BINS AND EDGES")
print(Bbins)
print(Bbin_edges)
Bbins_lefts = Bbin_edges[
0:len(Bbin_edges) -
1] #Combine clusters of 19 and 20 at end... negligible effect
Bbins_normed = Bbins / float(np.sum(Bbins))
Bbins_normed_unc = np.sqrt(Bbins) / float(np.sum(Bbins))
zero_bins = np.where(Bbins_normed_unc == 0)[0]
Bbins_normed_unc[zero_bins] = 1.15 / float(np.sum(Bbins))
print("BBins_normed: " + str(Bbins_normed))
init_params = [1]
popt, pcov = scp.curve_fit(mypoisson,
Bbins_lefts,
Bbins_normed,
p0=init_params,
maxfev=6000,
sigma=Bbins_normed_unc)
#init_params = [5000,0.04,100,1]
#popt, pcov = scp.curve_fit(mypoissons, Bbins_lefts,Bbins_normed,p0=init_params, maxfev=6000,sigma=Bbins_normed_unc)
print('BEST FIT POPTS: ' + str(popt))
myy = mypoisson(Bbins_lefts, popt[0])
myy_upper = mypoisson(Bbins_lefts, popt[0] + np.sqrt(pcov[0][0]))
#myy = mypoissons(Bbins_lefts,popt[0],popt[1],popt[2],popt[3])
plt.errorbar(x=Bbins_lefts,
y=Bbins_normed,
yerr=Bbins_normed_unc,
linestyle='None',
marker='o',
label='No source ($t>20 \, \mu s$)')
plt.plot(Bbins_lefts,
myy,
marker='None',
linewidth=6,
label=r'Best poiss. fit $\mu= %s \pm %s$' %
(str(np.round(popt[0], 2)), str(np.round(np.sqrt(pcov[0]), 2))),
color='black')
plt.plot(Bbins_lefts,
myy_upper,
marker='None',
linewidth=6,
label=r'Best poiss. fit upper bound',
color='gray')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Now, apply same event selection cuts to background data and form background multiplicity model
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_CleanPrompt = es.NoPromptClusters(Sdf_SinglePulses,
SIGNAL_WINDOW_START)
Sdf_CleanWindow = es.NoBurstClusters(Sdf_CleanPrompt, SIGNAL_WINDOW_START,
150)
Sdf_CleanWindow_noCB = Sdf_CleanWindow.loc[
Sdf_CleanWindow["clusterChargeBalance"] < 0.4].reset_index(drop=True)
Sdf_trig_SinglePulses = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses'] == 1) & (
Sdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(
Sdf_SinglePulses, Sdf_trig_SinglePulses, 2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_CleanPrompt,
Sdf_trig_CleanPrompt, 2000,
150)
MSData = abp.MakeClusterMultiplicityPlot(Sdf_CleanWindow_noCB,
Sdf_trig_CleanWindow)
plt.hist(MSData,
bins=20,
range=(0, 20),
alpha=0.2,
histtype='stepfilled',
linewidth=6)
plt.hist(MSData, bins=20, range=(0, 20), histtype='step', linewidth=6)
plt.xlabel("Neutron candidate multiplicity")
plt.ylabel("Number of acquisitions")
plt.title(
"Neutron candidate multiplicity, AmBe central source run \n (All preliminary cuts, [2,67] $\mu s$ window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
Sbins, Sbin_edges = np.histogram(MSData, range=(0, 5), bins=5)
print("SIGNAL BINS AND EDGES")
print(Sbins)
print(Sbin_edges)
Sbins_lefts = Sbin_edges[
0:len(Bbin_edges) -
1] #Combine clusters of 19 and 20 at end... negligible effect
Sbins_normed = Sbins / float(np.sum(Sbins))
Sbins_normed_unc = np.sqrt(Sbins) / float(np.sum(Sbins))
zero_bins = np.where(Sbins_normed_unc == 0)[0]
Sbins_normed_unc[zero_bins] = 1.15 / float(np.sum(Sbins))
plt.errorbar(x=Sbins_lefts,
y=Sbins_normed,
yerr=Sbins_normed_unc,
linestyle='None',
marker='o',
label='Source ($t>2 \, \mu s$)',
markersize=12)
plt.errorbar(x=Bbins_lefts,
y=Bbins_normed,
yerr=Bbins_normed_unc,
linestyle='None',
marker='o',
label='No source ($t>20 \, \mu s$)',
markersize=12)
plt.plot(Bbins_lefts,
myy,
marker='None',
linewidth=6,
label=r'Best poiss. fit $\mu= %s \pm %s$' %
(str(np.round(popt[0], 2)), str(np.round(np.sqrt(pcov[0]), 2))),
color='black')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Find best-fit assuming data-driven background model
PLBuilder = plb.ProfileLikelihoodBuilder()
BkgScaleFactor = (67000 - SIGNAL_WINDOW_START) / (
67000 - BKG_WINDOW_START) #Scale mean neutrons per window up by this
PLBuilder.SetBkgMean(BkgScaleFactor * popt[0])
PLBuilder.SetBkgMeanUnc(np.sqrt(pcov[0][0]))
NeutronProbProfile = EffRanges[POSITION_TO_ANALYZE]
#TODO: Also return the multiplicity array to make a histogram
ChiSquare, lowestChiSqProfile = PLBuilder.BuildLikelihoodProfile(
NeutronProbProfile, Sbins_normed, Sbins_normed_unc, NUMTHROWS,
Bbins_normed, Bbins_normed_unc)
print("MINIMUM CHI SQUARE: " + str(np.min(ChiSquare)))
ChiSquare_normed = ChiSquare / np.min(ChiSquare)
plt.errorbar(x=Sbins_lefts + 0.5,
y=Sbins_normed,
yerr=Sbins_normed_unc,
linestyle='None',
marker='o',
label='Source ($t>2 \, \mu s$)',
markersize=12)
#TODO: replace this with the multiplicity histogram returned above
plt.plot(Sbins_lefts + 0.5,
lowestChiSqProfile,
linestyle='None',
marker='o',
label='Data-driven best fit',
markersize=12,
color='blue')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Best fit model profiles to central AmBe source data")
plt.xlabel("Delayed cluster multiplicity")
plt.show()
plt.plot(NeutronProbProfile,
ChiSquare_normed,
marker='None',
linewidth=6,
label='Data-driven model',
color='red')
plt.title(
"Normalized Chi-square test parameter \n as a function of neutron detection efficiency"
)
plt.xlabel("Neutron detection efficiency $\epsilon_{n}$")
plt.ylabel("$\chi^{2}$/$\chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.plot(NeutronProbProfile,
ChiSquare - np.min(ChiSquare),
marker='None',
linewidth=6,
label='Data-driven model',
color='red')
plt.title(
"Chi-square test parameter \n as a function of neutron detection efficiency"
)
plt.xlabel("Neutron detection efficiency $\epsilon_{n}$")
plt.ylabel("$\chi^{2} - \chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Find best-fit assuming uncorrelated background model
PLBuilder2D = plb.ProfileLikelihoodBuilder2D()
neutron_efficiencies = EffRanges[POSITION_TO_ANALYZE]
background_mean = BkgRanges[POSITION_TO_ANALYZE]
PLBuilder2D.SetEffProfile(neutron_efficiencies)
PLBuilder2D.SetBkgMeanProfile(background_mean)
x_var, y_var, ChiSquare, lowestChiSqProfileUncorr = PLBuilder2D.BuildLikelihoodProfile(
Sbins_normed, Sbins_normed_unc, NUMTHROWS)
print("MINIMUM CHI SQUARE: " + str(np.min(ChiSquare)))
plt.errorbar(x=Sbins_lefts,
y=Sbins_normed,
yerr=Sbins_normed_unc,
linestyle='None',
marker='o',
label='Source ($t>2 \, \mu s$)',
markersize=12)
plt.plot(Sbins_lefts,
lowestChiSqProfileUncorr,
linestyle='None',
marker='o',
label='Best fit model profile',
markersize=12)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Best fit MC profile relative to central source data")
plt.xlabel("Delayed cluster multiplicity")
plt.show()
#Look at 2D chi-squared map
chisq_map = pd.DataFrame({
"Neutron detection efficiency":
np.round(x_var, 3),
"Background rate [candidates/trigger]":
np.round(y_var, 3),
"ChiSq":
ChiSquare / np.min(ChiSquare)
})
cmap = chisq_map.pivot(index="Neutron detection efficiency",
columns="Background rate [candidates/trigger]",
values="ChiSq")
ax = sns.heatmap(cmap, vmin=1, vmax=10)
plt.title("$\chi^{2}$/$\chi_{min}^{2}$ for profile likelihood parameters")
plt.show()
chisq_map = pd.DataFrame({
"Neutron detection efficiency":
np.round(x_var, 3),
"Background rate [candidates/trigger]":
np.round(y_var, 3),
"ChiSq":
ChiSquare - np.min(ChiSquare)
})
cmap = chisq_map.pivot(index="Neutron detection efficiency",
columns="Background rate [candidates/trigger]",
values="ChiSq")
ax = sns.heatmap(cmap, vmin=0, vmax=80)
plt.title("$\chi^{2} - \chi_{min}^{2}$ for profile likelihood parameters")
plt.show()
LowestInd = np.where(ChiSquare == np.min(ChiSquare))[0]
best_eff = x_var[LowestInd]
best_mean = y_var[LowestInd]
best_eff_chisquareinds = np.where(x_var == best_eff)[0]
best_eff_chisquares = ChiSquare[best_eff_chisquareinds]
best_eff_bkgmeans = y_var[best_eff_chisquareinds]
plt.plot(best_eff_bkgmeans,
best_eff_chisquares / np.min(ChiSquare),
marker='None',
linewidth=6,
label='Uncorr. bkg. model',
color='blue')
plt.title(
"Normalized Chi-square test parameter as $\lambda_{n}$ varies \n (best-fit detection efficiency $\epsilon_{n}$ fixed)"
)
plt.xlabel("Background mean $\lambda_{n}$ [clusters/trigger]")
plt.ylabel("$\chi^{2}$/$\chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.plot(best_eff_bkgmeans,
best_eff_chisquares - np.min(ChiSquare),
marker='None',
linewidth=6,
label='Uncorr. bkg. model',
color='blue')
plt.title(
"Normalized Chi-square test parameter as $\lambda_{n}$ varies \n (best-fit detection efficiency $\epsilon_{n}$ fixed)"
)
plt.xlabel("Background mean $\lambda_{n}$ [clusters/trigger]")
plt.ylabel("$\chi^{2} - \chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
best_mean_chisquareinds = np.where(y_var == best_mean)[0]
best_mean_chisquares = ChiSquare[best_mean_chisquareinds]
best_mean_efficiencypro = x_var[best_mean_chisquareinds]
plt.plot(best_mean_efficiencypro,
best_mean_chisquares / np.min(ChiSquare),
marker='None',
linewidth=6,
label='Uncorr. bkg. model',
color='blue')
plt.title(
"Normalized Chi-square test parameter as $\epsilon_{n}$ varies \n (best-fit background rate $\lambda_{n}$ fixed)"
)
plt.xlabel("Neutron detection efficiency $\epsilon_{n}$")
plt.ylabel("$\chi^{2}$/$\chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
plt.plot(best_mean_efficiencypro,
best_mean_chisquares - np.min(ChiSquare),
marker='None',
linewidth=6,
label='Uncorr. bkg. model',
color='blue')
plt.title(
"Normalized Chi-square test parameter as $\epsilon_{n}$ varies \n (best-fit background rate $\lambda_{n}$ fixed)"
)
plt.xlabel("Neutron detection efficiency $\epsilon_{n}$")
plt.ylabel("$\chi^{2} - \chi^{2}_{min}$")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
#Compare the two model fits to the signal data
fig = plt.figure()
ax = fig.add_subplot(1, 1, 1)
bin_rights = Sbins_lefts + (Sbins_lefts[1] - Sbins_lefts[0])
ax = abp.NiceBins(ax, Sbins_lefts, bin_rights, lowestChiSqProfileUncorr,
'dark blue', "Uncorr. bkg. best fit")
ax = abp.NiceBins(ax, Sbins_lefts, bin_rights, lowestChiSqProfile,
'dark red', "Data-driven bkg. best fit")
ax.errorbar(x=Sbins_lefts + 0.5,
y=Sbins_normed,
yerr=Sbins_normed_unc,
linestyle='None',
marker='o',
label='AmBe data',
markersize=12,
color='black')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title("Best fit multiplicity distributions to central source data")
plt.xlabel("Neutron candidate multiplicity")
plt.show()
def EstimateDarkRates(Sdf, Sdf_trig):
#Sdf_NoClusterWindow = es.NoBurstClusters(Sdf_CleanPrompt,0,5)
Sdf_trig_NoClusterWindow = es.NoBurst_WholeFile(Sdf, Sdf_trig, 0, 5)
print("SIZE OF DATAFRAME BEFORE BURST CUT: " + str(len(Sdf_trig)))
print("SIZE OF DATAFRAME AFTER BURST CUT: " +
str(len(Sdf_trig_NoClusterWindow)))
All_PE = np.hstack(Sdf_trig_NoClusterWindow['hitPE'])
All_T = np.hstack(Sdf_trig_NoClusterWindow['hitT'])
All_ID = np.hstack(Sdf_trig_NoClusterWindow['hitDetID'])
plt.hist(Sdf["clusterPE"], bins=200, range=(0, 50))
plt.title("cluster PE distribution \n (All acquisitions in tank)")
plt.xlabel("Hit PE")
plt.show()
plt.hist(All_PE, bins=200, range=(0, 50))
plt.title(
"PE distribution for all PMT hits \n (AmBe background run 1718, housing in dark box)"
)
plt.ylabel("Number of hits")
plt.xlabel("Hit PE")
plt.show()
plt.hist(All_T, bins=350, range=(0, 70000))
plt.title(
"Hit time distribution for all PMT hits \n (AmBe background run 1718, housing in dark box)"
)
plt.ylabel("Number of hits")
plt.xlabel("Hit time (ns)")
plt.show()
#Still some prompt activity in window; let's only use the last 50 microseconds
latewin = np.where((All_T > 20000) & (All_T < 70000))[0]
late_PE = All_PE[latewin]
late_T = All_T[latewin]
late_ID = All_ID[latewin]
IDSet = set(late_ID)
Acquisition_Time = (50E-6 * len(Sdf_trig_NoClusterWindow))
print("ACQUISITION TIME IN LATE WINDOW ESTIMATE IS: " +
str(Acquisition_Time))
hit_counts = []
dark_rate = []
print("ALL HIT IDS SEEN: " + str(IDSet))
for theid in IDSet:
IDhits = np.where(late_ID == theid)[0]
IDnumhits = len(late_ID[IDhits])
hit_counts.append(IDnumhits)
dark_rate.append(IDnumhits / Acquisition_Time)
hit_counts = np.array(hit_counts)
dark_rates = np.array(dark_rate)
plt.hist(hit_counts,
bins=30,
histtype='stepfilled',
range=(0, 10000),
linewidth=6)
#plt.hist(hit_counts,bins=30,alpha=0.75,histtype='step',range=(0,10000),linewidth=6)
plt.title(
"Total number of hits for each PMT \n (All PMT hits with $t_{hit}>20 \, \mu s$)"
)
plt.xlabel("Number of hits")
plt.show()
plt.hist(dark_rate, bins=30, histtype='stepfilled', range=(0, 30000))
#plt.hist(dark_rate,bins=30,alpha=0.75,histtype='step',range=(0,30000))
plt.title(
"Total number of hits for each PMT \n (All PMT hits with $t_{hit}>20 \, \mu s$)"
)
plt.xlabel("Dark count rate (Hz)")
plt.ylabel("Number of PMTs")
plt.show()
wm_hit_counts = []
wm_dark_rate = []
WM_IDs = [382, 393, 404]
print("ALL HIT IDS SEEN: " + str(WM_IDs))
for theid in WM_IDs:
IDhits = np.where(late_ID == theid)[0]
IDnumhits = len(late_ID[IDhits])
wm_hit_counts.append(IDnumhits)
wm_dark_rate.append(IDnumhits / Acquisition_Time)
plt.hist(wm_hit_counts,
bins=30,
histtype='stepfilled',
range=(0, 10000),
linewidth=6)
#plt.hist(hit_counts,bins=30,alpha=0.75,histtype='step',range=(0,10000),linewidth=6)
plt.title(
"Total number of hits for WATCHMAN tubes \n (All PMT hits with $t_{hit}>20 \, \mu s$)"
)
plt.xlabel("Number of hits")
plt.show()
plt.hist(wm_dark_rate, bins=30, histtype='stepfilled', range=(0, 30000))
#plt.hist(dark_rate,bins=30,alpha=0.75,histtype='step',range=(0,30000))
plt.title(
"Total number of hits for WATCHMAN tubes \n (All PMT hits with $t_{hit}>20 \, \mu s$)"
)
plt.xlabel("Dark count rate (Hz)")
plt.ylabel("Number of PMTs")
plt.show()
def PlotDemo(Sdf, Bdf, Sdf_trig, Bdf_trig):
Sdf_SinglePulses = es.SingleSiPMPulses(Sdf)
Sdf_CleanPrompt = es.NoPromptClusters(Sdf_SinglePulses, 2000)
Sdf_CleanWindow = es.NoBurstClusters(Sdf_CleanPrompt, 2000, 150)
Sdf_CleanWindow_CBClean = Sdf_CleanWindow.loc[
Sdf_CleanWindow['clusterChargeBalance'] < 0.4]
Sdf_trig_goodSiPM = Sdf_trig.loc[(Sdf_trig['SiPM1NPulses'] == 1) & (
Sdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Sdf_trig_CleanPrompt = es.NoPromptClusters_WholeFile(
Sdf_SinglePulses, Sdf_trig_goodSiPM, 2000)
Sdf_trig_CleanWindow = es.NoBurst_WholeFile(Sdf_CleanPrompt,
Sdf_trig_CleanPrompt, 2000,
150)
#Line of cuts applied to background clusters
Bdf_SinglePulses = es.SingleSiPMPulses(Bdf)
Bdf_CleanPrompt = es.NoPromptClusters(Bdf_SinglePulses, 2000)
Bdf_CleanWindow = es.NoBurstClusters(Bdf_CleanPrompt, 2000, 150)
Bdf_latewindow = Bdf_CleanWindow.loc[(Bdf_CleanWindow['clusterTime'] >
2000)].reset_index(drop=True)
Bdf_latewindow = Bdf_latewindow.loc[(Bdf_latewindow['clusterChargeBalance']
< 0.4)].reset_index(drop=True)
Bdf_trig_cleanSiPM = Bdf_trig.loc[(Bdf_trig['SiPM1NPulses'] == 1) & (
Bdf_trig['SiPM2NPulses'] == 1)].reset_index(drop=True)
Bdf_trig_cleanPrompt = es.NoPromptClusters_WholeFile(
Bdf_SinglePulses, Bdf_trig_cleanSiPM, 2000)
Bdf_trig_BurstCut = es.NoBurst_WholeFile(Bdf_CleanPrompt,
Bdf_trig_cleanPrompt, 2000, 150)
#Special case
Bdf_NoBurstLateWindow = es.NoBurstClusters(Bdf_SinglePulses, 12000, 150)
Bdf_NBlatewindow = Bdf_NoBurstLateWindow.loc[(
Bdf_NoBurstLateWindow['clusterTime'] > 12000)].reset_index(drop=True)
Bdf_NBCBCut = Bdf_NBlatewindow.loc[
Bdf_NBlatewindow['clusterChargeBalance'] < 0.4].reset_index(drop=True)
#Now, we've gotta get the total PE observed around the SiPM pulses
df = Sdf_trig_goodSiPM
SiPMTimeThreshold = 100
TotalPE = []
for j in df.index.values: #disgusting...
if df["SiPM1NPulses"][j] != 1 or df["SiPM2NPulses"][j] != 1:
continue
elif abs(df["SiPMhitT"][j][0] -
df["SiPMhitT"][j][1]) > SiPMTimeThreshold:
continue
SiPMMeanTime = (df["SiPMhitT"][j][0] + df["SiPMhitT"][j][1]) / 2.
clusterHitInds = np.where((
(SiPMMeanTime - np.array(df["hitT"][j])) < 0) & (
(SiPMMeanTime - np.array(df["hitT"][j])) > -600))[0]
clusterHits = np.array(df["hitPE"][j])[clusterHitInds]
clusterPE = np.sum(clusterHits)
TotalPE.append(clusterPE)
TotalPE = np.array(TotalPE)
TotalPE_neut = np.where(TotalPE < 200)[0]
TotalPE = TotalPE[TotalPE_neut]
plt.hist(TotalPE, bins=200, label="Source", alpha=0.7)
plt.xlabel("False start candidate PE")
plt.title("Manual cluster-finding PE neighboring SiPM pulses \n " +
r"(One pulse each SiPM, $-600<\mu_{SiPM} - t_{PMT}<0$)")
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
print("AFTER MANUAL FINDING STUFF")
#Get prompt clusters within a 100 ns window of the mean SiPM single pulse time
Sdf_SPPrompt = es.SiPMCorrelatedPrompts(Sdf_SinglePulses, 100, 1000, 2000)
print("NUMBER OF PROMPT CLUSTERS PASSING SINGLE SIPM PULSE CUTS: " +
str(len(Sdf_SinglePulses.eventTimeTank)))
#Sdf_SPPrompt = Sdf_SPPrompt.loc[Sdf_SPPrompt['clusterChargeBalance']<0.4].reset_index(drop=True)
plt.hist(TotalPE,
bins=200,
range=(0, 200),
label="Source, all hits near SiPM",
alpha=0.8,
histtype='step',
color='blue',
linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),
bins=200,
range=(0, 200),
alpha=0.75,
histtype='step',
linewidth=6,
color='green',
label='Source, TA clusters')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"Comparison of FS candidate cluster PE \n using manual clustering and ToolAnalysis clustering"
)
plt.xlabel("Cluster PE")
plt.show()
#plt.hist(TotalPE,bins=200,range=(0,200),label="Source, all hits near SiPM",alpha=0.8,histtype='step',color='blue',linewidth=6)
plt.hist(TotalPE,
bins=200,
range=(0, 200),
alpha=0.8,
histtype='step',
color='blue',
linewidth=6)
plt.hist(TotalPE,
bins=200,
range=(0, 200),
alpha=0.5,
histtype='stepfilled',
color='blue',
linewidth=6)
#plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),bins=200,range=(0,200),alpha=0.75,histtype='step',linewidth=6,color='green',label='Source, TA clusters')
#leg = plt.legend(loc=1,fontsize=24)
#leg.set_frame_on(True)
#leg.draw_frame(True)
#plt.title("Comparison of FS candidate cluster PE \n using manual clustering and ToolAnalysis clustering")
plt.title(
"SiPM-correlated tank PE for position 0 AmBe source data \n (Sum of all PMT hits within 300 ns of SiPM pulses)"
)
plt.ylabel("Number of acquisitions")
plt.xlabel("Total PE")
plt.show()
Sdf_SPPrompt_trig = es.SiPMCorrelatedPrompts_WholeFile(
Sdf_SPPrompt, Sdf_trig)
print("NUMBER OF PROMPT CLUSTERS PASSING CORRELATED PROMPT CUTS: " +
str(len(Sdf_SPPrompt.eventTimeTank)))
print("NUMBER OF TRIGS WITH AT LEAST ONE CORRELATED PROMPT: " +
str(len(Sdf_SPPrompt_trig.eventTimeTank)))
MSData = abp.MakeClusterMultiplicityPlot(Sdf_SPPrompt, Sdf_SPPrompt_trig)
#s_bins, s_edges = np.histogram(MSData,bins=20, range=(0,20))
#plt.hist(MSData,bins=20, range=(0,20), label="Source",alpha=0.7)
plt.hist(MSData, bins=100, label="Source", alpha=0.7)
plt.xlabel("False start candidate cluster multiplicity")
plt.title(
"Cluster multiplicity of false starts in source data \n (One pulse each SiPM, cluster within prompt window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
S1Delta, S2Delta = abp.SiPMClusterDifferences(Sdf_SPPrompt, 100)
plt.hist(S1Delta, bins=100, label="S1Time-clusterTime", alpha=0.7)
plt.hist(S2Delta, bins=100, label="S2Time-clusterTime", alpha=0.7)
plt.xlabel("SiPM time - Cluster time (ns)")
plt.title(
"Difference between SiPM peak time and cluster time \n (One pulse each SiPM, cluster within prompt window)"
)
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.show()
Sdf_SPPromptLoPE = Sdf_SPPrompt.loc[
Sdf_SPPrompt['clusterPE'] < 80].reset_index(drop=True)
print(
"NUMBER OF PROMPT CLUSTERS PASSING CORRELATED PROMPT CUTS LT 80 PE: " +
str(len(Sdf_SPPromptLoPE.eventTimeTank)))
NumTrigs = len(set(Sdf_SPPromptLoPE.eventNumber))
print(
"NUMBER OF TRIGS WITH A PASSING CORRELATED PROMPT CUTS CLUSTER LT 80 PE: "
+ str(NumTrigs))
labels = {
'title':
'Comparison of cluster PE to total SiPM Charge \n (Position 0, AmBe source installed)',
'xlabel': 'Cluster PE',
'ylabel': 'Total SiPM charge [nC]'
}
ranges = {
'xbins': 30,
'ybins': 40,
'xrange': [0, 60],
'yrange': [0, 0.5],
'promptTime': 2000
}
#abp.MakeHexJointPlot(Sdf,'clusterPE','clusterChargeBalance',labels,ranges)
abp.Make2DHist_PEVsQ(Sdf_SPPrompt, labels, ranges)
plt.show()
plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),
bins=30,
range=(0, 80),
alpha=0.5,
histtype='stepfilled',
linewidth=6)
plt.hist(np.hstack(Sdf_SPPrompt['clusterPE']),
bins=30,
range=(0, 80),
alpha=0.75,
histtype='step',
linewidth=6,
color='green')
leg = plt.legend(loc=1, fontsize=24)
leg.set_frame_on(True)
leg.draw_frame(True)
plt.title(
"False start candidate PE distribution (AmBe central source data)")
plt.xlabel("Cluster PE")
plt.show()