def __init__(self,
bios_flash_offset,
sys_clk_freq=int(12e6),
with_led_chaser=True,
**kwargs):
platform = lattice_ice40up5k_evn.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(
self,
platform,
sys_clk_freq,
ident="LiteX SoC on Lattice iCE40UP5k EVN breakout board",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=128 * kB))
# SPI Flash --------------------------------------------------------------------------------
# 4x mode is not possible on this board since WP and HOLD pins are not connected to the FPGA
from litespi.modules import N25Q032A
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="1x", module=N25Q032A(Codes.READ_1_1_1))
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led_n"),
sys_clk_freq=sys_clk_freq)
# Add a UART-Wishbone bridge -----------------------------------------
debug_uart = False
if debug_uart:
# This will add a bridge on the second serial port defined in platform
from litex.soc.cores.uart import UARTWishboneBridge
self.submodules.uart_bridge = UARTWishboneBridge(
platform.request("serial"), sys_clk_freq, baudrate=115200)
self.add_wb_master(self.uart_bridge.wishbone)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
with_led_chaser=True,
with_video_terminal=False,
**kwargs):
platform = icebreaker.Platform()
platform.add_extension(icebreaker.break_off_pmod)
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on iCEBreaker",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=64 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=64 * kB))
# SPI Flash --------------------------------------------------------------------------------
self.add_spi_flash(mode="1x", dummy_cycles=8)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
# Video ------------------------------------------------------------------------------------
if with_video_terminal:
platform.add_extension(icebreaker.dvi_pmod)
self.submodules.videophy = VideoDVIPHY(platform.request("dvi"),
clock_domain="sys")
self.add_video_terminal(phy=self.videophy,
timings="640x480@75Hz",
clock_domain="sys")
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led"),
sys_clk_freq=sys_clk_freq)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
revision="v1",
**kwargs):
platform = icebreaker_bitsy.Platform(revision=revision)
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on iCEBreaker-bitsy",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as 64kB SRAM / 64kB RAM) -----------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("psram", self.spram.bus, SoCRegion(size=128 * kB))
self.bus.add_region(
"sram",
SoCRegion(origin=self.bus.regions["psram"].origin + 0 * kB,
size=64 * kB,
linker=True))
if not self.integrated_main_ram_size:
self.bus.add_region(
"main_ram",
SoCRegion(origin=self.bus.regions["psram"].origin + 64 * kB,
size=64 * kB,
linker=True))
# SPI Flash --------------------------------------------------------------------------------
from litespi.modules import W25Q128JV
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="4x",
module=W25Q128JV(Codes.READ_1_1_4),
with_master=False)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(12e6),
with_led_chaser=True,
**kwargs):
kwargs["uart_name"] = "usb_acm" # Enforce UART to USB-ACM
platform = fomu_pvt.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# Serial -----------------------------------------------------------------------------------
# FIXME: do proper install of ValentyUSB.
os.system(
"git clone https://github.com/litex-hub/valentyusb -b hw_cdc_eptri"
)
sys.path.append("valentyusb")
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on Fomu",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=128 * kB))
# SPI Flash --------------------------------------------------------------------------------
self.add_spi_flash(mode="1x", dummy_cycles=8)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led_n"),
sys_clk_freq=sys_clk_freq)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
with_led_chaser=True,
with_video_terminal=False,
**kwargs):
platform = muselab_icesugar.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant
if kwargs.get("cpu_type", "vexriscv") == "vexriscv":
kwargs["cpu_variant"] = "lite"
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on Muselab iCESugar",
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=64 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=64 * kB))
# SPI Flash --------------------------------------------------------------------------------
from litespi.modules import W25Q64FV
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="1x",
module=W25Q64FV(Codes.READ_1_1_1),
with_master=False)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.bus.regions["spiflash"].origin +
bios_flash_offset,
size=32 * kB,
linker=True))
self.cpu.set_reset_address(self.bus.regions["rom"].origin)
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
led_pads = platform.request_all("user_led_n")
self.submodules.leds = LedChaser(pads=led_pads,
sys_clk_freq=sys_clk_freq)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(12e6),
with_led_chaser=True,
**kwargs):
platform = lattice_ice40up5k_evn.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(
self,
platform,
sys_clk_freq,
ident="LiteX SoC on Lattice iCE40UP5k EVN breakout board",
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=128 * kB))
# SPI Flash --------------------------------------------------------------------------------
# 4x mode is not possible on this board since WP and HOLD pins are not connected to the FPGA
from litespi.modules import N25Q032A
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="1x", module=N25Q032A(Codes.READ_1_1_1))
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.bus.regions["spiflash"].origin +
bios_flash_offset,
size=32 * kB,
linker=True))
self.cpu.set_reset_address(self.bus.regions["rom"].origin)
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led_n"),
sys_clk_freq=sys_clk_freq)
# Add a UARTBone bridge --------------------------------------------------------------------
debug_uart = False
if debug_uart:
self.add_uartbone(name="serial")
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
with_video_terminal=False,
**kwargs):
platform = muselab_icesugar.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs["cpu_variant"] = "lite"
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on Muselab iCESugar",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=64 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=64 * kB))
# SPI Flash --------------------------------------------------------------------------------
self.add_spi_flash(mode="1x", dummy_cycles=8)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
# Leds -------------------------------------------------------------------------------------
led_pads = platform.request_all("user_led_n")
self.submodules.leds = LedChaser(pads=led_pads,
sys_clk_freq=sys_clk_freq)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
revision="v1",
**kwargs):
platform = icebreaker_bitsy.Platform(revision=revision)
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on iCEBreaker-bitsy",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as SRAM) ---------------------------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("sram", self.spram.bus, SoCRegion(size=128 * kB))
# SPI Flash --------------------------------------------------------------------------------
self.add_spi_flash(mode="1x", dummy_cycles=8)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
def __init__(self,
bios_flash_offset,
spi_flash_module="AT25SF161",
sys_clk_freq=int(12e6),
with_led_chaser=True,
**kwargs):
kwargs["uart_name"] = "usb_acm" # Enforce UART to USB-ACM
platform = fomu_pvt.Platform()
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# Set CPU variant / reset address
kwargs[
"cpu_reset_address"] = self.mem_map["spiflash"] + bios_flash_offset
# Serial -----------------------------------------------------------------------------------
# FIXME: do proper install of ValentyUSB.
os.system(
"git clone https://github.com/litex-hub/valentyusb -b hw_cdc_eptri"
)
sys.path.append("valentyusb")
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on Fomu",
ident_version=True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as 64kB SRAM / 64kB RAM) -----------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("psram", self.spram.bus, SoCRegion(size=128 * kB))
self.bus.add_region(
"sram",
SoCRegion(origin=self.bus.regions["psram"].origin + 0 * kB,
size=64 * kB,
linker=True))
if not self.integrated_main_ram_size:
self.bus.add_region(
"main_ram",
SoCRegion(origin=self.bus.regions["psram"].origin + 64 * kB,
size=64 * kB,
linker=True))
# SPI Flash --------------------------------------------------------------------------------
from litespi.modules import AT25SF161, GD25Q16C, MX25R1635F, W25Q128JV
from litespi.opcodes import SpiNorFlashOpCodes as Codes
# lambdas for lazy module instantiation.
spi_flash_modules = {
"AT25SF161": lambda: AT25SF161(Codes.READ_1_1_4),
"GD25Q16C": lambda: GD25Q16C(Codes.READ_1_1_1),
"MX25R1635F": lambda: MX25R1635F(Codes.READ_1_1_4),
"W25Q128JV": lambda: W25Q128JV(Codes.READ_1_1_4),
}
self.add_spi_flash(mode="4x",
module=spi_flash_modules[spi_flash_module](),
with_master=False)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.mem_map["spiflash"] + bios_flash_offset,
size=32 * kB,
linker=True))
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led_n"),
sys_clk_freq=sys_clk_freq)
def __init__(self,
bios_flash_offset,
sys_clk_freq=int(24e6),
with_led_chaser=True,
with_video_terminal=False,
**kwargs):
platform = icebreaker.Platform()
platform.add_extension(icebreaker.break_off_pmod)
# Disable Integrated ROM/SRAM since too large for iCE40 and UP5K has specific SPRAM.
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self,
platform,
sys_clk_freq,
ident="LiteX SoC on iCEBreaker",
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq)
# 128KB SPRAM (used as 64kB SRAM / 64kB RAM) -----------------------------------------------
self.submodules.spram = Up5kSPRAM(size=128 * kB)
self.bus.add_slave("psram", self.spram.bus, SoCRegion(size=128 * kB))
self.bus.add_region(
"sram",
SoCRegion(origin=self.bus.regions["psram"].origin + 0 * kB,
size=64 * kB,
linker=True))
if not self.integrated_main_ram_size:
self.bus.add_region(
"main_ram",
SoCRegion(origin=self.bus.regions["psram"].origin + 64 * kB,
size=64 * kB,
linker=True))
# SPI Flash --------------------------------------------------------------------------------
from litespi.modules import W25Q128JV
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="4x",
module=W25Q128JV(Codes.READ_1_1_4),
with_master=False)
# Add ROM linker region --------------------------------------------------------------------
self.bus.add_region(
"rom",
SoCRegion(origin=self.bus.regions["spiflash"].origin +
bios_flash_offset,
size=32 * kB,
linker=True))
self.cpu.set_reset_address(self.bus.regions["rom"].origin)
# Video ------------------------------------------------------------------------------------
if with_video_terminal:
platform.add_extension(icebreaker.dvi_pmod)
self.submodules.videophy = VideoDVIPHY(platform.request("dvi"),
clock_domain="sys")
self.add_video_terminal(phy=self.videophy,
timings="640x480@75Hz",
clock_domain="sys")
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads=platform.request_all("user_led"),
sys_clk_freq=sys_clk_freq)
