def start():
global counter
global user_id
time_start = 0
read0 = 1
logcount = count_people()
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
current_date = now.strftime("%Y:%m:%d")
current_time = now.strftime("%H:%M:%S")
end = datetime.now()
# print "read0= %d" % read0
if read1 == read2:
if read1 == 1:
logcount = logcount + 1
print "person count:" + str(logcount)
time_start = time.monotonic()
print now
print("男子トイレ使用開始\n")
start_waiting()
wiringpi.digitalWrite(
GPIO_LED, 0) # switch on LED. Sets port 12 to 1 (3V3, on)
store_log(str(logcount) + "男子 トイレ使用開始\n")
status("Busy")
user_id = logTable.insert_table(1, current_date, current_time,
1, "Boy Busy", duration)
else:
stop_waiting()
time_end = time.monotonic()
duration = time_end - time_start
wiringpi.digitalWrite(
GPIO_LED, 1) # switch off LED. Sets port 12 to 0 (0V, off)
pygame.mixer.Channel(0).stop()
store_log("男子トイレ使用終了\n")
user_id = logTable.insert_table(1, current_date, current_time,
2, "Boy Free", duration)
status("Free")
print "\n男子トイレ使用終了"
print end
read0 = read1
def start():
global counter
global user_id
global dur
read0 = 1
log2count = count2_people()
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
current_date = now.strftime("%Y:%m:%d")
current_time = now.strftime("%H:%M:%S")
end = datetime.now()
# print "read0= %d" % read0
if read1 == read2:
if read1 == 1:
log2count = log2count + 1
print "person count:" + str(log2count)
print now
print " 女子トイレ使用開始\n"
start_waiting()
wiringpi.digitalWrite(GPIO_LED, 0) # switch on LED. Sets port 18 to 0 (3V3, on)
store2_log( str(log2count) + "女子 トイレ使用開始\n")
user_id = logTable.insert_table(2, current_date, current_time, 1, "Girl Busy", 1.0)
status2("Busy")
else:
stop_waiting()
wiringpi.digitalWrite(GPIO_LED, 1) # switch off LED. Sets port 18 to 1 (0V, off)
pygame.mixer.Channel(1).stop()
store2_log("女子 トイレ使用終了\n")
user_id = logTable.insert_table(2,current_date, current_time, 2, "Girl Free", 0.0)
status2("Free")
print "\n女子トイレ使用終了"
print end
read0 = read1
def start():
global counter
durationStop = datetime.now() - timedelta(days=1)
duration1 = 0
status_toilet = "free"
start_d = datetime.now()
global user_id
global start
global end
global status_blink
global stop_threads
global stop_blink
global start_blink
start_time = datetime.now()
read0 = 1
logcount = count_people()
temp_count = logcount
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if status_blink and (status_toilet == "free"):
if (datetime.now() - durationStop).seconds > 3:
print("stop blink")
stop_threads = True
start_blink.join()
status_blink = False
duration = (datetime.now() - start_time).seconds / 60
start_time = datetime.now()
duration = str(duration)
#store_log(duration + "\n 男子トイレ使用終了\n")
#user_id = logTable.insert_table(1, current_date, current_time, 2, "Boy Free", duration=duration)
status("Free")
print(duration)
print("\n男子トイレ使用終了")
temp_count = logcount
status_toilet = "free"
elif (not status_blink) and status_toilet == "busy":
if (datetime.now() - start_time).seconds > 60:
stop_threads = False
print("start blink")
start_blink = threading.Thread(target=blink_led, args=())
start_blink.start()
status_blink = True
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
# date_time = now.strftime("[%Y/%m/%d %H:%M:%S]")
current_date = now.strftime("%Y:%m:%d")
current_time = now.strftime("%H:%M:%S")
end = datetime.now()
# print "read0= %d" % read0
if status_blink:
#if (datetime.now() - durationStop).seconds>3:
stop_blink = False
start_blink.start()
stop_blink = True
start_blink.join()
status_blink = False
if read1 == read2:
if read1 == 1:
duration1 = datetime.now() - durationStop
if (duration1.seconds < 3):
thAnn5()
start_d = datetime.now()
status_toilet = "busy"
wiringpi.digitalWrite(
GPIO_LED,
0) # switch on LED. Sets port 12 to 1 (3V3, on)
# status("Busy")
# print ("\n Boybusy")
# store_log(str(logcount) + "男子 トイレ使用開始\n")
user_id = logTable.insert_table(1,
current_date,
current_time,
2,
"Boy Busy",
duration=duration)
else:
# stop_thAnn5()
start_time = datetime.now()
status_toilet = "busy"
logcount = logcount + 1
start_d = datetime.now()
# tt = start_d.time()
#if tt > 1.0:
# stop_threads = False
# start_blink = threading.Thread(target=blink_led, args=())
# start_blink.start()
# status_blink = True
start_waiting()
print("person count:" + str(logcount))
wiringpi.digitalWrite(
GPIO_LED,
0) # switch on LED. Sets port 12 to 1 (3V3, on)
store_log(str(logcount) + "男子 トイレ使用開始\n")
status("Busy")
print("\n Boybusy")
user_id = logTable.insert_table(1,
current_date,
current_time,
1,
"Boy Busy",
duration=duration)
#
else:
stop_waiting()
status_toilet = "free"
durationStop = datetime.now()
time_end = datetime.now()
duration = time_end - start_d
duration = duration.seconds / 60.0
wiringpi.digitalWrite(
GPIO_LED, 1) # switch off LED. Sets port 12 to 0 (0V, off)
pygame.mixer.Channel(0).stop()
print("\n男子トイレ使用終了")
duration = str(duration)
store_log(duration + "\n 男子トイレ使用終了\n")
# if temp_count<logcount:
# duration = str(duration)
# store_log(duration + "\n 男子トイレ使用終了\n")
# user_id = logTable.insert_table(1, current_date, current_time, 2, "Boy Free", duration=duration)
# status("Free")
# print (duration)
# print ("\n男子トイレ使用終了")
# temp_count = logcount
# else:
if temp_count < logcount:
duration = str(duration)
user_id = logTable.insert_table(1,
current_date,
current_time,
2,
"Boy Free",
duration=duration)
status("Free")
print(duration)
print("\n男子トイレ使用終了")
store_log(duration + "\n 男子トイレ使用終了\n")
temp_count = logcount
else:
logTable.update_table(user_id, duration)
temp_count = logcount
read0 = read1
def start():
global counter
durationStop = datetime.now() - timedelta(days=1)
duration1 = 0
start_d = datetime.now()
global user_id
global start
global end
start_time = 0
read0 = 1
logcount = count_people()
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
# date_time = now.strftime("[%Y/%m/%d %H:%M:%S]")
current_date = now.strftime("%Y:%m:%d")
current_time = now.strftime("%H:%M:%S")
end = datetime.now()
# print "read0= %d" % read0
if read1 == read2:
if read1 == 1:
duration1 = datetime.now() - durationStop
print(duration1)
if duration1.seconds < 5:
thAnn5()
start_d = datetime.now()
wiringpi.digitalWrite(
GPIO_LED,
0) # switch on LED. Sets port 12 to 1 (3V3, on)
status("Busy")
print("\n Boybusy")
store_log(str(logcount) + "男子 トイレUse\n")
user_id = logTable.insert_table(1,
current_date,
current_time,
0,
"Boy Busy",
duration=duration)
else:
stop_thAnn5()
logcount = logcount + 1
start_d = datetime.now()
start_waiting()
print("person count:" + str(logcount))
wiringpi.digitalWrite(
GPIO_LED,
0) # switch on LED. Sets port 12 to 1 (3V3, on)
store_log(str(logcount) + "男子 Busy\n")
status("Busy")
print("\n Boybusy")
user_id = logTable.insert_table(1,
current_date,
current_time,
1,
"Boy Busy",
duration=duration)
else:
stop_waiting()
durationStop = datetime.now()
time_end = datetime.now()
duration = time_end - start_d
duration = duration.seconds / 60.0
wiringpi.digitalWrite(
GPIO_LED, 1) # switch off LED. Sets port 12 to 0 (0V, off)
pygame.mixer.Channel(0).stop()
store_log("男子トイレ Free\n")
user_id = logTable.insert_table(1,
current_date,
current_time,
2,
"Boy Free",
duration=duration)
status("Free")
print(duration)
print("\n男子トイレFree")
read0 = read1
def start():
global counter
global user_id
durationStop = datetime.now() - timedelta(days = 1)
duration2 = 0
start_d = datetime.now()
read0 = 1
log2count = count2_people()
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
current = datetime.now()
current_date = now.strftime("%Y:%m:%d")
current_time = now.strftime("%H:%M:%S")
# print "read0= %d" % read0
if read1 == read2:
if read1 == 1:
duration2 = datetime.now() - durationStop
print(duration2)
if duration2.seconds < 5:
thAnn5()
start_d = datetime.now()
wiringpi.digitalWrite(GPIO_LED, 0) # switch on LED. Sets port 18 to 1 (3V3, on)
store2_log(str(log2count) + "女子 トイレUse\n")
user_id = logTable.insert_table(2, current_date, current_time,0, "Girl Busy", duration = duration)
status2("Busy")
# print ("\n 女子トイレUse")
else:
stop_thAnn5()
log2count = log2count + 1
start_d = datetime.now()
print ("person count:" + str(log2count))
start_waiting()
wiringpi.digitalWrite(GPIO_LED, 0) # switch on LED. Sets port 18 to 1 (3V3, on)
store2_log(str(log2count) + "女子 トイレBusy\n")
user_id = logTable.insert_table(2, current_date, current_time, 1, "Girl Busy", duration=duration)
status2("Busy")
print ("\n 女子トイレBusy\n")
else:
stop_waiting()
durationStop = datetime.now()
time_end = datetime.now()
duration = time_end - start_d
duration = duration.seconds/60.0
wiringpi.digitalWrite(GPIO_LED, 1) # switch off LED. Sets port 18 to 0 (0V, off)
pygame.mixer.Channel(1).stop()
store2_log("女子 トイレFree\n")
user_id = logTable.insert_table(2,current_date, current_time, 2, "Girl Free", duration= duration)
print (duration)
status2("Free")
print ("\n女子トイレFree\n")
read0 = read1
def start():
global counter
global user_id
global start
global end
global status2_blink
global start2_blink
global stop2_threads
durationStop2 = datetime.now() - timedelta(days = 1)
duration2 = 0
status2_toilet = "free"
start_d = datetime.now()
start_time = datetime.now()
read0 = 1
log2count = count2_people()
temp2_count = log2count
while True:
time.sleep(0.1)
read1 = wiringpi.digitalRead(GPIO_SW)
# print "read1= %d" % read1
if status2_blink and (status2_toilet == "free"):
if (datetime.now() - durationStop2).seconds > 1:
print("stop blink")
stop2_threads = True
start2_blink.join()
status2_blink = False
duration = (datetime.now() - start_time).seconds /60 #For 1 min
start_time = datetime.now()
duration =str(duration)
store2_log(duration + "\n 男子トイレ使用終了\n")
status2("free")
print (duration)
print("\n男子トイレ使用終了")
temp2_count = log2count
status2_toilet = "free"
elif (not status2_blink) and status2_toilet == "busy":
if(datetime.now() - start_time).seconds > 60 :
stop2_threads = False
print("start blink")
start2_blink = threading.Thread(target = blink_led, args = ())
start2_blink.start()
status2_blink = True
if read0 == read1:
continue
time.sleep(0.05)
read2 = wiringpi.digitalRead(GPIO_SW)
now = datetime.now()
current = datetime.now()
current_date = now.strftime("%Y/%m/%d %H:%M:%f")
current_time = now.strftime("%H:%M:%f")
end = datetime.now()
# print "read0= %d" % read0
if read1 == read2:
if read1 == 1:
duration2 = datetime.now() - durationStop2
# print(duration2)
if (duration2.seconds) < 5:
thAnn5()
start_d = datetime.now()
status2_toilet = "busy"
wiringpi.digitalWrite(GPIO_LED, 0) # switch on LED. Sets port 18 to 1 (3V3, on)
user_id = logTable.insert_table(2, current_date, current_time,2, "Girl Busy", duration = duration)
# status2("Busy")
# print ("\n 女子トイレUse")
else:
# stop_thAnn5()
start_time = datetime.now()
start_d = datetime.now()
status2_toilet = "busy"
log2count = log2count + 1
print ("person count:" + str(log2count))
start_waiting()
wiringpi.digitalWrite(GPIO_LED, 0) # switch on LED. Sets port 18 to 1 (3V3, on)
store2_log(str(log2count) + "女子 トイレBusy\n")
status2("Busy")
print ("\n 女子トイレBusy\n")
user_id = logTable.insert_table(2, current_date, current_time, 1, "Girl Busy", duration=duration)
else:
stop_waiting()
status2_toilet = "free"
durationStop2 = datetime.now()
time_end = datetime.now()
duration = time_end - start_d
duration = duration.seconds/60.0
wiringpi.digitalWrite(GPIO_LED, 1) # switch off LED. Sets port 18 to 0 (0V, off)
pygame.mixer.Channel(1).stop()
# store2_log("女子 トイレFree\n")
user_id = logTable.insert_table(2,current_date, current_time, 2, "Girl Free", duration= duration)
# print (duration)
# status2("Free")
# print ("\n女子トイレFree\n")
if temp2_count > log2count:
logTable.update_table(user_id , duration)
temp2_count = log2count
read0 = read1
