def temporary_config(name, settings):
"""Temporarily set a configuration (use in a with-statement)."""
config.push(name, settings)
try:
yield
finally:
config.pop(name)
def temporary_config(name, settings):
"""Temporarily set a configuration (use in a with-statement)."""
config.push(name, settings)
try:
yield
finally:
config.pop(name)
def test_dispose_preservable(self):
# Two actions can happen here, depending on a site-wide setting. If
# the site owner has indicated that filtered messages can be
# preserved, then this is similar to discarding the message except
# that a copy is preserved in the 'bad' queue.
self._mlist.filter_action = FilterAction.preserve
config.push('preservable', """
[mailman]
filtered_messages_are_preservable: yes
""")
try:
mime_delete.dispose(self._mlist, self._msg, {}, 'preserved')
except errors.DiscardMessage as error:
pass
else:
raise AssertionError('DiscardMessage exception expected')
finally:
config.pop('preservable')
self.assertEqual(error.message, 'preserved')
# There should be no messages in the 'bad' queue.
messages = get_queue_messages('bad')
self.assertEqual(len(messages), 1)
message = messages[0].msg
self.assertEqual(message['subject'], 'A disposable message')
self.assertEqual(message['message-id'], '<ant>')
def test_invalid_config(self):
config.push('invalid_config', """\
[mta]
smtp_secure_mode: invalid
""")
with self.assertRaises(InvalidConfigurationError):
BaseDeliveryTester()
config.pop('invalid_config')
def test_starttls_config(self):
config.push('starttls_config', """\
[mta]
smtp_secure_mode: starttls
""")
delivery = BaseDeliveryTester()
self.assertIsInstance(delivery.connection, Connection)
config.pop('starttls_config')
def test_pushed_section_is_found(self):
config.push('test config', """\
[archiver.other]
enable: yes
""")
result = self._command.invoke(conf, ('-k', 'enable'))
self.assertIn('[archiver.other] enable: yes', result.output)
config.pop('test config')
def tearDown(cls):
assert cls.var_dir is not None, 'Layer not set up'
reset_the_world()
# Destroy the test database after the tests are done so that there is
# no data in case the tests are rerun with a database layer like mysql
# or postgresql which are not deleted in teardown.
config.pop('test config')
shutil.rmtree(cls.var_dir)
cls.var_dir = None
def test_site_disabled(self):
# Here the system configuration enables all the archivers in time for
# the archive set to be created with all list archivers enabled. But
# then the site-wide archiver gets disabled, so the list specific
# archiver will also be disabled.
archiver_set = IListArchiverSet(self._mlist)
archiver = archiver_set.get('prototype')
self.assertTrue(archiver.is_enabled)
# Disable the site-wide archiver.
config.push('enable prototype', """\
[archiver.prototype]
enable: no
""")
self.assertFalse(archiver.is_enabled)
config.pop('enable prototype')
def test_site_disabled(self):
# Here the system configuration enables all the archivers in time for
# the archive set to be created with all list archivers enabled. But
# then the site-wide archiver gets disabled, so the list specific
# archiver will also be disabled.
archiver_set = IListArchiverSet(self._mlist)
archiver = archiver_set.get('prototype')
self.assertTrue(archiver.is_enabled)
# Disable the site-wide archiver.
config.push('enable prototype', """\
[archiver.prototype]
enable: no
""")
self.assertFalse(archiver.is_enabled)
config.pop('enable prototype')
def tearDown(cls):
assert cls.var_dir is not None, 'Layer not set up'
reset_the_world()
# Destroy the test database after the tests are done so that there is
# no data in case the tests are rerun with a database layer like mysql
# or postgresql which are not deleted in teardown.
shutil.rmtree(cls.var_dir)
# Prevent the bit of post-processing on the .pop() that creates
# directories. We're basically shutting down everything and we don't
# need the directories created. Plus, doing so leaves a var directory
# turd in the source tree's top-level directory. We do it this way
# rather than shutil.rmtree'ing the resulting var directory because
# it's possible the user created a valid such directory for
# operational or test purposes.
config.create_paths = False
config.pop('test config')
cls.var_dir = None
def tearDown(cls):
assert cls.var_dir is not None, 'Layer not set up'
reset_the_world()
# Destroy the test database after the tests are done so that there is
# no data in case the tests are rerun with a database layer like mysql
# or postgresql which are not deleted in teardown.
shutil.rmtree(cls.var_dir)
# Prevent the bit of post-processing on the .pop() that creates
# directories. We're basically shutting down everything and we don't
# need the directories created. Plus, doing so leaves a var directory
# turd in the source tree's top-level directory. We do it this way
# rather than shutil.rmtree'ing the resulting var directory because
# it's possible the user created a valid such directory for
# operational or test purposes.
config.create_paths = False
config.pop('test config')
cls.var_dir = None
def test_enable_list_archiver(self):
# When the system configuration file disables an archiver site-wide,
# the list-specific mailing list will get initialized as not enabled.
# Create the archiver set on the fly so that it doesn't get
# initialized with a configuration that enables the prototype archiver.
archiver_set = IListArchiverSet(self._mlist)
archiver = archiver_set.get('prototype')
self.assertFalse(archiver.is_enabled)
# Enable both the list archiver and the system archiver.
archiver.is_enabled = True
config.push('enable prototype', """\
[archiver.prototype]
enable: yes
""")
# Get the IListArchiver again.
archiver = archiver_set.get('prototype')
self.assertTrue(archiver.is_enabled)
config.pop('enable prototype')
def test_enable_list_archiver(self):
# When the system configuration file disables an archiver site-wide,
# the list-specific mailing list will get initialized as not enabled.
# Create the archiver set on the fly so that it doesn't get
# initialized with a configuration that enables the prototype archiver.
archiver_set = IListArchiverSet(self._mlist)
archiver = archiver_set.get('prototype')
self.assertFalse(archiver.is_enabled)
# Enable both the list archiver and the system archiver.
archiver.is_enabled = True
config.push('enable prototype', """\
[archiver.prototype]
enable: yes
""")
# Get the IListArchiver again.
archiver = archiver_set.get('prototype')
self.assertTrue(archiver.is_enabled)
config.pop('enable prototype')
def test_dispose_non_preservable(self):
# Two actions can happen here, depending on a site-wide setting. If
# the site owner has indicated that filtered messages cannot be
# preserved, then this is the same as discarding them.
self._mlist.filter_action = FilterAction.preserve
config.push('non-preservable', """
[mailman]
filtered_messages_are_preservable: no
""")
try:
mime_delete.dispose(self._mlist, self._msg, {}, 'not preserved')
except errors.DiscardMessage as error:
pass
else:
raise AssertionError('DiscardMessage exception expected')
finally:
config.pop('non-preservable')
self.assertEqual(error.message, 'not preserved')
# There should be no messages in the 'bad' queue.
self.assertEqual(len(get_queue_messages('bad')), 0)
def test_site_admin_unicode(self):
# Since the config file is read as bytes, the site_owner is also a
# bytes and must be converted to unicode when used as a fallback.
self._cris.unsubscribe()
self._dave.unsubscribe()
self.assertEqual(self._mlist.administrators.member_count, 0)
msgdata = {}
# In order to properly mimic the testing environment, use
# config.push()/config.pop() directly instead of using the
# configuration() context manager.
config.push('test_site_admin_unicode', b"""\
[mailman]
site_owner: [email protected]
""")
try:
self._process(self._mlist, self._msg, msgdata)
finally:
config.pop('test_site_admin_unicode')
self.assertEqual(len(msgdata['recipients']), 1)
self.assertIsInstance(list(msgdata['recipients'])[0], unicode)
def tearDown(self):
config.pop('test config')
def _remove(self):
config.pop(self._uuid)
def tearDown(self):
config.pop('dispose')
def tearDown(self):
config.pop('password scheme')
reset_the_world()
def tearDown(self):
config.pop('site owner')
def tearDown(self):
config.pop('no template dir')
shutil.rmtree(self.var_dir)
def _remove(self):
config.pop(self._uuid)
def tearDown(self):
shutil.rmtree(self._tempdir)
config.pop('prototype')
def tearDown(cls):
assert cls.var_dir is not None, 'Layer not set up'
config.pop('test config')
shutil.rmtree(cls.var_dir)
cls.var_dir = None
def tearDown(cls):
assert cls.var_dir is not None, "Layer not set up"
config.pop("test config")
shutil.rmtree(cls.var_dir)
cls.var_dir = None
def tearDown(cls):
assert cls.smtpd is not None, 'Layer not set up'
cls.smtpd.clear()
cls.smtpd.stop()
config.pop('starttls')
def tearDown(self):
config.pop('dispose')
def tearDown(self):
config.pop('fake outgoing')
def tearDown(self):
config.pop("template config")
shutil.rmtree(self.var_dir)
def tearDown(self):
if self.fp is not None:
self.fp.close()
config.pop('template config')
shutil.rmtree(self.var_dir)
def config_initialize(request):
# Set up the basic configuration stuff. Turn off path creation until
# we've pushed the testing config.
config.create_paths = False
initialize.initialize_1(INHIBIT_CONFIG_FILE)
# Calculate a temporary VAR_DIR directory so that run-time artifacts
# of the tests won't tread on the installation's data. This also
# makes it easier to clean up after the tests are done, and insures
# isolation of test suite runs.
var_dir = tempfile.mkdtemp()
# We need a test configuration both for the foreground process and any
# child processes that get spawned. lazr.config would allow us to do
# it all in a string that gets pushed, and we'll do that for the
# foreground, but because we may be spawning processes (such as
# runners) we'll need a file that we can specify to the with the -C
# option. Craft the full test configuration string here, push it, and
# also write it out to a temp file for -C.
#
# Create a dummy postfix.cfg file so that the test suite doesn't try
# to run the actual postmap command, which may not exist anyway.
postfix_cfg = os.path.join(var_dir, 'postfix.cfg')
with open(postfix_cfg, 'w') as fp:
print(dedent("""
[postfix]
postmap_command: true
transport_file_type: hash
"""),
file=fp)
test_config = dedent("""
[mailman]
layout: testing
[paths.testing]
var_dir: {}
[mta]
configuration: {}
[devmode]
enabled: yes
testing: yes
recipient: [email protected]
[mta]
smtp_port: 9025
lmtp_port: 9024
incoming: mailman.testing.mta.FakeMTA
[webservice]
port: 9001
[archiver.mhonarc]
enable: yes
[archiver.mail_archive]
enable: yes
[archiver.prototype]
enable: yes
""".format(var_dir, postfix_cfg))
config.create_paths = True
config.push('test config', test_config)
# Initialize everything else.
initialize.initialize_2(testing=True)
initialize.initialize_3()
config_file = os.path.join(var_dir, 'test.cfg')
with open(config_file, 'w') as fp:
fp.write(test_config)
print(file=fp)
config.filename = config_file
# Start the Mailman's test runner.
server = TestableMaster(wait_for_webservice)
server.start('rest', 'in')
request.addfinalizer(server.stop)
# Run the test.
yield
reset_the_world()
# Destroy the test database after the tests are done so that there is
# no data in case the tests are rerun with a database layer like mysql
# or postgresql which are not deleted in teardown.
shutil.rmtree(var_dir)
# Prevent the bit of post-processing on the .pop() that creates
# directories. We're basically shutting down everything and we don't
# need the directories created. Plus, doing so leaves a var directory
# turd in the source tree's top-level directory. We do it this way
# rather than shutil.rmtree'ing the resulting var directory because
# it's possible the user created a valid such directory for
# operational or test purposes.
config.create_paths = False
config.pop('test config')
def tearDown(self):
# Free references.
del _deliveries[:]
shutil.rmtree(self._template_dir)
config.pop('templates')
def tearDown(self):
if self.fp is not None:
self.fp.close()
config.pop('template config')
shutil.rmtree(self.var_dir)
def tearDown(self):
shutil.rmtree(self._tempdir)
config.pop('prototype')
def tearDown(self):
config.pop('dummy')
def tearDown(self):
# Free references.
del _deliveries[:]
shutil.rmtree(self._template_dir)
config.pop('templates')
def tearDown(self):
config.pop('site owner')
def tearDown(self):
config.pop('fake outgoing')
def tearDown(self):
config.pop('xx template dir')
shutil.rmtree(self._var_dir)
def tearDown(self):
config.pop('dummy')
def tearDown(self):
config.pop('template config')
shutil.rmtree(self.var_dir)
def tearDown(self):
config.pop('test config')