def __init__(
self,
fill_opacity=0,
stroke_width=3,
length=DEFAULT_ARROW_TIP_LENGTH,
start_angle=PI,
**kwargs,
):
self.start_angle = start_angle
Circle.__init__(
self, fill_opacity=fill_opacity, stroke_width=stroke_width, **kwargs
)
self.width = length
self.stretch_to_fit_height(length)
def test_animationbuilder_in_group(using_opengl_renderer):
sqr = Square()
circ = Circle()
animation_group = AnimationGroup(
sqr.animate.shift(DOWN).scale(2), FadeIn(circ))
assert all(
isinstance(anim, Animation) for anim in animation_group.animations)
succession = Succession(sqr.animate.shift(DOWN).scale(2), FadeIn(circ))
assert all(isinstance(anim, Animation) for anim in succession.animations)
def add_bases(self):
"""Adds the end caps of the cylinder."""
color = self.color if config["renderer"] == "opengl" else self.fill_color
opacity = self.opacity if config["renderer"] == "opengl" else self.fill_opacity
self.base_top = Circle(
radius=self.radius,
color=color,
fill_opacity=opacity,
shade_in_3d=True,
stroke_width=0,
)
self.base_top.shift(self.u_range[1] * IN)
self.base_bottom = Circle(
radius=self.radius,
color=color,
fill_opacity=opacity,
shade_in_3d=True,
stroke_width=0,
)
self.base_bottom.shift(self.u_range[0] * IN)
self.add(self.base_top, self.base_bottom)
def __init__(self,
mobject: Mobject,
shape: Type = Rectangle,
fade_in=False,
fade_out=False,
time_width=0.3,
buff: float = SMALL_BUFF,
color: Color = YELLOW,
run_time=1,
stroke_width=DEFAULT_STROKE_WIDTH,
**kwargs):
if shape is Rectangle:
frame = SurroundingRectangle(
mobject,
color,
buff,
stroke_width=stroke_width,
)
elif shape is Circle:
frame = Circle(color=color, stroke_width=stroke_width).surround(
mobject,
buffer_factor=1,
)
radius = frame.width / 2
frame.scale((radius + buff) / radius)
else:
raise ValueError("shape should be either Rectangle or Circle.")
if fade_in and fade_out:
super().__init__(
FadeIn(frame, run_time=run_time / 2),
FadeOut(frame, run_time=run_time / 2),
**kwargs,
)
elif fade_in:
frame.reverse_direction()
super().__init__(
FadeIn(frame, run_time=run_time / 2),
Uncreate(frame, run_time=run_time / 2),
**kwargs,
)
elif fade_out:
super().__init__(
Create(frame, run_time=run_time / 2),
FadeOut(frame, run_time=run_time / 2),
**kwargs,
)
else:
super().__init__(
ShowPassingFlash(frame, time_width, run_time=run_time),
**kwargs)
def test_animationgroup_is_passing_remover_to_animations(
animation_remover, animation_group_remover):
scene = Scene()
sqr_animation = Create(Square(), remover=animation_remover)
circ_animation = Write(Circle(), remover=animation_remover)
animation_group = AnimationGroup(sqr_animation,
circ_animation,
remover=animation_group_remover)
scene.play(animation_group)
scene.wait(0.1)
assert sqr_animation.remover
assert circ_animation.remover
def __init__(
self,
base_radius=1,
height=1,
direction=Z_AXIS,
show_base=False,
v_range=[0, TAU],
u_min=0,
checkerboard_colors=False,
**kwargs,
):
self.direction = direction
self.theta = PI - np.arctan(base_radius / height)
super().__init__(
self.func,
v_range=v_range,
u_range=[u_min, np.sqrt(base_radius**2 + height**2)],
checkerboard_colors=checkerboard_colors,
**kwargs,
)
# used for rotations
self._current_theta = 0
self._current_phi = 0
if show_base:
self.base_circle = Circle(
radius=base_radius,
color=self.fill_color,
fill_opacity=self.fill_opacity,
stroke_width=0,
)
self.base_circle.shift(height * IN)
self.add(self.base_circle)
self._rotate_to_direction()
def test_animationgroup_is_passing_remover_to_nested_animationgroups():
scene = Scene()
sqr_animation = Create(Square())
circ_animation = Write(Circle(), remover=True)
polygon_animation = Create(RegularPolygon(5))
animation_group = AnimationGroup(
AnimationGroup(sqr_animation, polygon_animation),
circ_animation,
remover=True,
)
scene.play(animation_group)
scene.wait(0.1)
assert sqr_animation.remover
assert circ_animation.remover
assert polygon_animation.remover
def _circle_to_mobject(self, circle_element: MinidomElement, style: dict):
"""Creates a Circle VMobject from a SVG <circle> command.
Parameters
----------
circle_element : :class:`minidom.Element`
A SVG circle path command.
style : :class:`dict`
Style specification, using the SVG names for properties.
Returns
-------
Circle
A Circle VMobject
"""
x, y, r = (self._attribute_to_float(circle_element.getAttribute(key))
if circle_element.hasAttribute(key) else 0.0
for key in ("cx", "cy", "r"))
return Circle(radius=r,
**parse_style(style)).shift(x * RIGHT + y * DOWN)
def __init__(self, dark_theme: bool = True):
super().__init__()
logo_green = "#81b29a"
logo_blue = "#454866"
logo_red = "#e07a5f"
m_height_over_anim_height = 0.75748
self.font_color = "#ece6e2" if dark_theme else "#343434"
self.scale_factor = 1
self.M = MathTex(r"\mathbb{M}").scale(7).set_color(self.font_color)
self.M.shift(2.25 * LEFT + 1.5 * UP)
self.circle = Circle(color=logo_green, fill_opacity=1).shift(LEFT)
self.square = Square(color=logo_blue, fill_opacity=1).shift(UP)
self.triangle = Triangle(color=logo_red, fill_opacity=1).shift(RIGHT)
self.shapes = VGroup(self.triangle, self.square, self.circle)
self.add(self.shapes, self.M)
self.move_to(ORIGIN)
anim = VGroup()
for i, ch in enumerate("anim"):
tex = Tex(
"\\textbf{" + ch + "}",
tex_template=TexFontTemplates.gnu_freeserif_freesans,
)
if i != 0:
tex.next_to(anim, buff=0.01)
tex.align_to(self.M, DOWN)
anim.add(tex)
anim.set_color(self.font_color)
anim.height = m_height_over_anim_height * self.M.height
# Note: "anim" is only shown in the expanded state
# and thus not yet added to the submobjects of self.
self.anim = anim
class Cylinder(Surface):
"""A cylinder, defined by its height, radius and direction,
Examples
---------
.. manim:: ExampleCylinder
:save_last_frame:
class ExampleCylinder(ThreeDScene):
def construct(self):
axes = ThreeDAxes()
cylinder = Cylinder(radius=2, height=3)
self.set_camera_orientation(phi=75 * DEGREES, theta=30 * DEGREES)
self.add(axes, cylinder)
Parameters
---------
radius : :class:`float`
The radius of the cylinder.
height : :class:`float`
The height of the cylinder.
direction : :class:`numpy.array`
The direction of the central axis of the cylinder.
v_range : :class:`Sequence[float]`
The height along the height axis (given by direction) to start and end on.
show_ends : :class:`bool`
Whether to show the end caps or not.
"""
def __init__(
self,
radius=1,
height=2,
direction=Z_AXIS,
v_range=[0, TAU],
show_ends=True,
resolution=(24, 24),
**kwargs,
):
self._height = height
self.radius = radius
super().__init__(
self.func,
resolution=resolution,
u_range=[-self._height / 2, self._height / 2],
v_range=v_range,
**kwargs,
)
if show_ends:
self.add_bases()
self._current_phi = 0
self._current_theta = 0
self.set_direction(direction)
def func(self, u, v):
"""Converts from cylindrical coordinates to cartesian.
Parameters
---------
u : :class:`float`
The height.
v : :class:`float`
The azimuthal angle.
"""
height = u
phi = v
r = self.radius
return np.array([r * np.cos(phi), r * np.sin(phi), height])
def add_bases(self):
"""Adds the end caps of the cylinder."""
color = self.color if config["renderer"] == "opengl" else self.fill_color
opacity = self.opacity if config["renderer"] == "opengl" else self.fill_opacity
self.base_top = Circle(
radius=self.radius,
color=color,
fill_opacity=opacity,
shade_in_3d=True,
stroke_width=0,
)
self.base_top.shift(self.u_range[1] * IN)
self.base_bottom = Circle(
radius=self.radius,
color=color,
fill_opacity=opacity,
shade_in_3d=True,
stroke_width=0,
)
self.base_bottom.shift(self.u_range[0] * IN)
self.add(self.base_top, self.base_bottom)
def _rotate_to_direction(self):
x, y, z = self.direction
r = np.sqrt(x**2 + y**2 + z**2)
if r > 0:
theta = np.arccos(z / r)
else:
theta = 0
if x == 0:
if y == 0: # along the z axis
phi = 0
else: # along the x axis
phi = np.arctan(np.inf)
if y < 0:
phi += PI
else:
phi = np.arctan(y / x)
if x < 0:
phi += PI
# undo old rotation (in reverse direction)
self.rotate(-self._current_phi, Z_AXIS, about_point=ORIGIN)
self.rotate(-self._current_theta, Y_AXIS, about_point=ORIGIN)
# do new rotation
self.rotate(theta, Y_AXIS, about_point=ORIGIN)
self.rotate(phi, Z_AXIS, about_point=ORIGIN)
# store new values
self._current_theta = theta
self._current_phi = phi
def set_direction(self, direction):
# if get_norm(direction) is get_norm(self.direction):
# pass
self.direction = direction
self._rotate_to_direction()
def get_direction(self):
"""Returns the direction of the central axis of the cylinder."""
return self.direction
class Cone(Surface):
"""A circular cone.
Can be defined using 2 parameters: its height, and its base radius.
The polar angle, theta, can be calculated using arctan(base_radius /
height) The spherical radius, r, is calculated using the pythagorean
theorem.
Examples
--------
.. manim:: ExampleCone
:save_last_frame:
class ExampleCone(ThreeDScene):
def construct(self):
axes = ThreeDAxes()
cone = Cone(direction=X_AXIS+Y_AXIS+2*Z_AXIS)
self.set_camera_orientation(phi=5*PI/11, theta=PI/9)
self.add(axes, cone)
Parameters
--------
base_radius : :class:`float`
The base radius from which the cone tapers.
height : :class:`float`
The height measured from the plane formed by the base_radius to the apex of the cone.
direction : :class:`numpy.array`
The direction of the apex.
show_base : :class:`bool`
Whether to show the base plane or not.
v_range : :class:`Sequence[float]`
The azimuthal angle to start and end at.
u_min : :class:`float`
The radius at the apex.
checkerboard_colors : :class:`bool`
Show checkerboard grid texture on the cone.
"""
def __init__(
self,
base_radius=1,
height=1,
direction=Z_AXIS,
show_base=False,
v_range=[0, TAU],
u_min=0,
checkerboard_colors=False,
**kwargs,
):
self.direction = direction
self.theta = PI - np.arctan(base_radius / height)
super().__init__(
self.func,
v_range=v_range,
u_range=[u_min, np.sqrt(base_radius**2 + height**2)],
checkerboard_colors=checkerboard_colors,
**kwargs,
)
# used for rotations
self._current_theta = 0
self._current_phi = 0
if show_base:
self.base_circle = Circle(
radius=base_radius,
color=self.fill_color,
fill_opacity=self.fill_opacity,
stroke_width=0,
)
self.base_circle.shift(height * IN)
self.add(self.base_circle)
self._rotate_to_direction()
def func(self, u, v):
"""Converts from spherical coordinates to cartesian.
Parameters
---------
u : :class:`float`
The radius.
v : :class:`float`
The azimuthal angle.
"""
r = u
phi = v
return np.array(
[
r * np.sin(self.theta) * np.cos(phi),
r * np.sin(self.theta) * np.sin(phi),
r * np.cos(self.theta),
],
)
def _rotate_to_direction(self):
x, y, z = self.direction
r = np.sqrt(x**2 + y**2 + z**2)
if r > 0:
theta = np.arccos(z / r)
else:
theta = 0
if x == 0:
if y == 0: # along the z axis
phi = 0
else:
phi = np.arctan(np.inf)
if y < 0:
phi += PI
else:
phi = np.arctan(y / x)
if x < 0:
phi += PI
# Undo old rotation (in reverse order)
self.rotate(-self._current_phi, Z_AXIS, about_point=ORIGIN)
self.rotate(-self._current_theta, Y_AXIS, about_point=ORIGIN)
# Do new rotation
self.rotate(theta, Y_AXIS, about_point=ORIGIN)
self.rotate(phi, Z_AXIS, about_point=ORIGIN)
# Store values
self._current_theta = theta
self._current_phi = phi
def set_direction(self, direction):
self.direction = direction
self._rotate_to_direction()
def get_direction(self):
return self.direction
