def test_extendPhysicalNetworkVlan(self):
"""
Test to update a physical network and extend its vlan
"""
phy_networks = PhysicalNetwork.list(self.apiClient)
self.assertNotEqual(len(phy_networks), 0,
msg="There are no physical networks in the zone")
self.network = phy_networks[0]
self.networkid = phy_networks[0].id
vlan1 = self.vlan["part"][0]
updatePhysicalNetworkResponse = self.network.update(self.apiClient, id = self.networkid, vlan = vlan1)
self.assert_(updatePhysicalNetworkResponse is not None,
msg="couldn't extend the physical network with vlan %s"%vlan1)
self.assert_(isinstance(self.network, PhysicalNetwork))
vlan2 = self.vlan["part"][1]
updatePhysicalNetworkResponse2 = self.network.update(self.apiClient, id = self.networkid, vlan = vlan2)
self.assert_(updatePhysicalNetworkResponse2 is not None,
msg="couldn't extend the physical network with vlan %s"%vlan2)
self.assert_(isinstance(self.network, PhysicalNetwork))
vlanranges= updatePhysicalNetworkResponse2.vlan
self.assert_(vlanranges is not None,
"No VLAN ranges found on the deployment")
self.assert_(vlanranges.find(self.vlan["full"]) > 0, "vlan ranges are not extended")
def get_free_vlan(apiclient, zoneid):
"""
Find an unallocated VLAN outside the range allocated to the physical network.
@note: This does not guarantee that the VLAN is available for use in
the deployment's network gear
@return: physical_network, shared_vlan_tag
"""
list_physical_networks_response = PhysicalNetwork.list(apiclient,
zoneid=zoneid)
assert isinstance(list_physical_networks_response, list)
assert len(list_physical_networks_response
) > 0, "No physical networks found in zone %s" % zoneid
physical_network = list_physical_networks_response[0]
networks = list_networks(apiclient, zoneid=zoneid, type='Shared')
usedVlanIds = []
if isinstance(networks, list) and len(networks) > 0:
usedVlanIds = [
int(nw.vlan) for nw in networks if nw.vlan != "untagged"
]
if hasattr(physical_network, "vlan") is False:
while True:
shared_ntwk_vlan = random.randrange(1, 4095)
if shared_ntwk_vlan in usedVlanIds:
continue
else:
break
else:
vlans = xsplit(physical_network.vlan, ['-', ','])
assert len(vlans) > 0
assert int(vlans[0]) < int(
vlans[-1]
), "VLAN range %s was improperly split" % physical_network.vlan
retriesCount = 20 #Assuming random function will give different integer each time
shared_ntwk_vlan = None
while True:
if retriesCount == 0:
break
free_vlan = int(vlans[-1]) + random.randrange(1, 20)
if free_vlan > 4095:
free_vlan = int(vlans[0]) - random.randrange(1, 20)
if free_vlan < 0 or (free_vlan in usedVlanIds):
retriesCount -= 1
continue
else:
shared_ntwk_vlan = free_vlan
break
return physical_network, shared_ntwk_vlan
def test_04_remove_unused_range(self):
"""
Test removing unused vlan range
"""
# 1. Add new non contiguous range to existing vlan range
# 2. Remove unused vlan range
# 3. Unused vlan range should gte removed successfully
vlan1 = self.existingvlan+","+self.vlan["partial_range"][0]
self.physicalnetwork.update(self.apiClient, id = self.physicalnetworkid, vlan = vlan1)
vlan2 = vlan1+","+self.vlan["partial_range"][1]
self.physicalnetwork.update(self.apiClient, id = self.physicalnetworkid, vlan = vlan2)
self.debug("Removing vlan : %s" % self.vlan["partial_range"][1])
self.physicalnetwork.update(self.apiClient, id = self.physicalnetworkid, vlan = vlan1)
physicalnetworks = PhysicalNetwork.list(self.apiclient, id=self.physicalnetworkid)
self.assertTrue(isinstance(physicalnetworks, list), "PhysicalNetwork.list should return a \
valid list object")
self.assertTrue(len(physicalnetworks) > 0, "physical networks list should not be empty")
vlanranges= physicalnetworks[0].vlan
self.assert_(vlanranges.find(self.vlan["partial_range"][1]) == -1, "vlan range is not removed")
return
def validatePhysicalNetworkVlan(self, physicalNetworkId, vlan):
"""Validate whether the physical network has the updated vlan
params:
@physicalNetworkId: The id of physical network which needs to be validated
@vlan: vlan with which physical network was updated. This should match with the vlan of listed
physical network
Raise Exception if not matched
"""
self.debug("Listing physical networks with id: %s" % physicalNetworkId)
physicalnetworks = PhysicalNetwork.list(self.apiclient, id=physicalNetworkId)
self.assertTrue(isinstance(physicalnetworks, list), "PhysicalNetwork.list should return a \
valid list object")
self.assertTrue(len(physicalnetworks) > 0, "physical networks list should not be empty")
self.debug("Checking if physical network vlan matches with the passed vlan")
vlans = xsplit(vlan,[','])
for virtualLan in vlans:
self.assert_(physicalnetworks[0].vlan.find(virtualLan) != -1, "vlan range %s \
is not present in physical network: %s" % (virtualLan, physicalNetworkId))
return
def test_04_remove_unused_range(self):
"""
Test removing unused vlan range
"""
# 1. Add new non contiguous range to existing vlan range
# 2. Remove unused vlan range
# 3. Unused vlan range should gte removed successfully
vlan1 = self.existingvlan+","+self.vlan["partial_range"][0]
self.physicalnetwork.update(self.apiClient, id = self.physicalnetworkid, vlan = vlan1)
self.debug("Removing vlan : %s" % self.vlan["partial_range"][0])
self.physicalnetwork.update(self.apiClient, id = self.physicalnetworkid, vlan = self.existingvlan)
physicalnetworks = PhysicalNetwork.list(self.apiclient, id=self.physicalnetworkid)
self.assertTrue(isinstance(physicalnetworks, list), "PhysicalNetwork.list should return a \
valid list object")
self.assertTrue(len(physicalnetworks) > 0, "physical networks list should not be empty")
vlanranges= physicalnetworks[0].vlan
self.assert_(vlanranges.find(self.vlan["partial_range"][0]) == -1, "vlan range is not removed")
return
def validatePhysicalNetworkVlan(self, physicalNetworkId, vlan):
"""Validate whether the physical network has the updated vlan
params:
@physicalNetworkId: The id of physical network which needs to be validated
@vlan: vlan with which physical network was updated. This should match with the vlan of listed
physical network
Raise Exception if not matched
"""
self.debug("Listing physical networks with id: %s" % physicalNetworkId)
physicalnetworks = PhysicalNetwork.list(self.apiclient, id=physicalNetworkId)
self.assertTrue(isinstance(physicalnetworks, list), "PhysicalNetwork.list should return a \
valid list object")
self.assertTrue(len(physicalnetworks) > 0, "physical networks list should not be empty")
self.debug("Checking if physical network vlan matches with the passed vlan")
vlans = xsplit(vlan,[','])
for virtualLan in vlans:
self.assert_(physicalnetworks[0].vlan.find(virtualLan) != -1, "vlan range %s \
is not present in physical network: %s" % (virtualLan, physicalNetworkId))
return
def test_extendPhysicalNetworkVlan(self):
"""
Test to update a physical network and extend its vlan
"""
phy_networks = PhysicalNetwork.list(self.apiClient)
self.assertNotEqual(len(phy_networks),
0,
msg="There are no physical networks in the zone")
self.network = phy_networks[0]
self.networkid = phy_networks[0].id
vlan1 = self.vlan["part"][0]
updatePhysicalNetworkResponse = self.network.update(self.apiClient,
id=self.networkid,
vlan=vlan1)
self.assert_(updatePhysicalNetworkResponse is not None,
msg="couldn't extend the physical network with vlan %s" %
vlan1)
self.assert_(isinstance(self.network, PhysicalNetwork))
vlan2 = self.vlan["part"][1]
updatePhysicalNetworkResponse2 = self.network.update(self.apiClient,
id=self.networkid,
vlan=vlan2)
self.assert_(updatePhysicalNetworkResponse2 is not None,
msg="couldn't extend the physical network with vlan %s" %
vlan2)
self.assert_(isinstance(self.network, PhysicalNetwork))
vlanranges = updatePhysicalNetworkResponse2.vlan
self.assert_(vlanranges is not None,
"No VLAN ranges found on the deployment")
self.assert_(
vlanranges.find(self.vlan["full"]) > 0,
"vlan ranges are not extended")
def get_free_vlan(apiclient, zoneid):
"""
Find an unallocated VLAN outside the range allocated to the physical network.
@note: This does not guarantee that the VLAN is available for use in
the deployment's network gear
@return: physical_network, shared_vlan_tag
"""
list_physical_networks_response = PhysicalNetwork.list(
apiclient,
zoneid=zoneid
)
assert isinstance(list_physical_networks_response, list)
assert len(list_physical_networks_response) > 0, "No physical networks found in zone %s" % zoneid
physical_network = list_physical_networks_response[0]
networks = list_networks(apiclient, zoneid= zoneid, type='Shared')
usedVlanIds = []
if isinstance(networks, list) and len(networks) > 0:
usedVlanIds = [int(nw.vlan) for nw in networks if nw.vlan!="untagged"]
if hasattr(physical_network, "vlan") is False:
while True:
shared_ntwk_vlan = random.randrange(1,4095)
if shared_ntwk_vlan in usedVlanIds:
continue
else:
break
else:
vlans = xsplit(physical_network.vlan, ['-', ','])
assert len(vlans) > 0
assert int(vlans[0]) < int(vlans[-1]), "VLAN range %s was improperly split" % physical_network.vlan
retriesCount = 20 #Assuming random function will give different integer each time
shared_ntwk_vlan = None
while True:
if retriesCount == 0:
break
free_vlan = int(vlans[-1]) + random.randrange(1, 20)
if free_vlan > 4095:
free_vlan = int(vlans[0]) - random.randrange(1, 20)
if free_vlan < 0 or (free_vlan in usedVlanIds):
retriesCount -= 1
continue
else:
shared_ntwk_vlan = free_vlan
break
return physical_network, shared_ntwk_vlan
def tearDown(self):
"""
Teardown to update a physical network and shrink its vlan
@return:
"""
phy_networks = PhysicalNetwork.list(self.apiClient)
self.assertNotEqual(len(phy_networks), 0,
msg="There are no physical networks in the zone")
self.network = phy_networks[0]
self.networkid = phy_networks[0].id
updateResponse = self.network.update(self.apiClient, id = self.networkid, removevlan = self.vlan["full"])
self.assert_(updateResponse.vlan.find(self.vlan["full"]) < 0,
"VLAN was not removed successfully")
def tearDown(self):
"""
Teardown to update a physical network and shrink its vlan
@return:
"""
phy_networks = PhysicalNetwork.list(self.apiClient)
self.assertNotEqual(len(phy_networks),
0,
msg="There are no physical networks in the zone")
self.network = phy_networks[0]
self.networkid = phy_networks[0].id
updateResponse = self.network.update(self.apiClient,
id=self.networkid,
vlan=self.existing_vlan)
self.assert_(
updateResponse.vlan.find(self.vlan["full"]) < 0,
"VLAN was not removed successfully")
def setNonContiguousVlanIds(apiclient, zoneid):
"""
Form the non contiguous ranges based on currently assigned range in physical network
"""
NonContigVlanIdsAcquired = False
list_physical_networks_response = PhysicalNetwork.list(
apiclient,
zoneid=zoneid
)
assert isinstance(list_physical_networks_response, list)
assert len(list_physical_networks_response) > 0, "No physical networks found in zone %s" % zoneid
for physical_network in list_physical_networks_response:
vlans = xsplit(physical_network.vlan, ['-', ','])
assert len(vlans) > 0
assert int(vlans[0]) < int(vlans[-1]), "VLAN range %s was improperly split" % physical_network.vlan
# Keep some gap between existing vlan and the new vlans which we are going to add
# So that they are non contiguous
non_contig_end_vlan_id = int(vlans[-1]) + 6
non_contig_start_vlan_id = int(vlans[0]) - 6
# Form ranges which are consecutive to existing ranges but not immediately contiguous
# There should be gap in between existing range and new non contiguous ranage
# If you can't add range after existing range, because it's crossing 4095, then
# select VLAN ids before the existing range such that they are greater than 0, and
# then add this non contiguoud range
vlan = { "partial_range": ["",""], "full_range": ""}
if non_contig_end_vlan_id < 4095:
vlan["partial_range"][0] = str(non_contig_end_vlan_id - 4) + '-' + str(non_contig_end_vlan_id - 3)
vlan["partial_range"][1] = str(non_contig_end_vlan_id - 1) + '-' + str(non_contig_end_vlan_id)
vlan["full_range"] = str(non_contig_end_vlan_id - 4) + '-' + str(non_contig_end_vlan_id)
NonContigVlanIdsAcquired = True
elif non_contig_start_vlan_id > 0:
vlan["partial_range"][0] = str(non_contig_start_vlan_id) + '-' + str(non_contig_start_vlan_id + 1)
vlan["partial_range"][1] = str(non_contig_start_vlan_id + 3) + '-' + str(non_contig_start_vlan_id + 4)
vlan["full_range"] = str(non_contig_start_vlan_id) + '-' + str(non_contig_start_vlan_id + 4)
NonContigVlanIdsAcquired = True
else:
NonContigVlanIdsAcquired = False
# If failed to get relevant vlan ids, continue to next physical network
# else break from loop as we have hot the non contiguous vlan ids for the test purpose
if not NonContigVlanIdsAcquired:
continue
else:
break
# If even through looping from all existing physical networks, failed to get relevant non
# contiguous vlan ids, then fail the test case
if not NonContigVlanIdsAcquired:
return None, None
return physical_network, vlan
def setNonContiguousVlanIds(self, apiclient, zoneid):
"""
Form the non contiguous ranges based on currently assigned range in physical network
"""
NonContigVlanIdsAcquired = False
list_physical_networks_response = PhysicalNetwork.list(apiclient,
zoneid=zoneid)
assert isinstance(list_physical_networks_response, list)
assert len(list_physical_networks_response
) > 0, "No physical networks found in zone %s" % zoneid
for physical_network in list_physical_networks_response:
self.physicalnetwork = physical_network
self.physicalnetworkid = physical_network.id
self.existingvlan = physical_network.vlan
vlans = xsplit(self.existingvlan, ['-', ','])
assert len(vlans) > 0
assert int(vlans[0]) < int(
vlans[-1]
), "VLAN range %s was improperly split" % self.existingvlan
# Keep some gap between existing vlan and the new vlans which we are going to add
# So that they are non contiguous
non_contig_end_vlan_id = int(vlans[-1]) + 6
non_contig_start_vlan_id = int(vlans[0]) - 6
# Form ranges which are consecutive to existing ranges but not immediately contiguous
# There should be gap in between existing range and new non contiguous ranage
# If you can't add range after existing range, because it's crossing 4095, then
# select VLAN ids before the existing range such that they are greater than 0, and
# then add this non contiguoud range
if non_contig_end_vlan_id < 4095:
self.vlan["partial_range"][0] = str(
non_contig_end_vlan_id -
4) + '-' + str(non_contig_end_vlan_id - 3)
self.vlan["partial_range"][1] = str(non_contig_end_vlan_id -
1) + '-' + str(
non_contig_end_vlan_id)
self.vlan["full_range"] = str(non_contig_end_vlan_id -
4) + '-' + str(
non_contig_end_vlan_id)
NonContigVlanIdsAcquired = True
elif non_contig_start_vlan_id > 0:
self.vlan["partial_range"][0] = str(
non_contig_start_vlan_id) + '-' + str(
non_contig_start_vlan_id + 1)
self.vlan["partial_range"][1] = str(
non_contig_start_vlan_id +
3) + '-' + str(non_contig_start_vlan_id + 4)
self.vlan["full_range"] = str(
non_contig_start_vlan_id) + '-' + str(
non_contig_start_vlan_id + 4)
NonContigVlanIdsAcquired = True
else:
NonContigVlanIdsAcquired = False
# If failed to get relevant vlan ids, continue to next physical network
# else break from loop as we have hot the non contiguous vlan ids for the test purpose
if not NonContigVlanIdsAcquired:
continue
else:
break
# If even through looping from all existing physical networks, failed to get relevant non
# contiguous vlan ids, then fail the test case
if not NonContigVlanIdsAcquired:
self.fail(
"Failed to set non contiguous vlan ids to test. Free some ids from \
from existing physical networks at extreme ends")
return