def main():
from materials import CZTS, Cu2S_low, ZnS_zincblende, SnS, S2
import numpy as np
# Surface model from ab initio calcs and NIST data
T = np.linspace(573.15, 873.15, 100) # K
P = np.array(np.logspace(-8, 2, 100), ndmin=2).transpose() # Pa
D_mu = CZTS.mu_kJ(T, P) - (Cu2S_low.mu_kJ(T, P) + ZnS_zincblende.mu_kJ(
T, P) + SnS.mu_kJ(T, P) + 0.5 * S2.mu_kJ(T, P))
D_mu_label = '$\Delta G_f$ / kJ mol$^{-1}$'
scale_range = [-50, 70]
# Stability lines from figure 5, J. J. Scragg et al., Chem. Mater. (2011) 23 4625-4633
kinetic_data = np.genfromtxt('jscragg_2011.csv',
delimiter=',',
skip_header=1)
# Convert log pressure to absolute pressure in mbar
kinetic_data[:, 1:] = np.power(10, kinetic_data[:, 1:])
# Columnwise conversion to SI units from deg C and mbar
kinetic_data_si = (kinetic_data + [273.15, 0., 0.]) * [1., 100., 100.]
plot_potential(T,
P,
D_mu,
D_mu_label,
scale_range,
filename='plots/DG_CZTS_SnS_Scragg.png',
T_units='K',
P_units='Pa',
overlay=kinetic_data_si)
def main():
from materials import CZTS, Cu2S_low, ZnS_zincblende, SnS, S2
import numpy as np
# Surface model from ab initio calcs and NIST data
T = np.linspace(573.15,873.15,100) # K
P = np.array( np.logspace(-8,2,100),ndmin=2).transpose() # Pa
D_mu = CZTS.mu_kJ(T,P) - (Cu2S_low.mu_kJ(T,P) +
ZnS_zincblende.mu_kJ(T,P) +
SnS.mu_kJ(T,P) +
0.5*S2.mu_kJ(T,P) )
D_mu_label = '$\Delta G_f$ / kJ mol$^{-1}$'
scale_range = [-50,70]
# Stability lines from figure 5, J. J. Scragg et al., Chem. Mater. (2011) 23 4625-4633
kinetic_data = np.genfromtxt('jscragg_2011.csv',delimiter=',',skip_header=1)
# Convert log pressure to absolute pressure in mbar
kinetic_data[:,1:] = np.power(10,kinetic_data[:,1:])
# Columnwise conversion to SI units from deg C and mbar
kinetic_data_si = (kinetic_data + [273.15, 0., 0.]) * [1., 100., 100.]
plot_potential(T,P,D_mu,D_mu_label,scale_range, filename='plots/DG_CZTS_SnS_Scragg.png',
T_units='K', P_units='Pa', overlay=kinetic_data_si)
def main():
from materials import CZTS, Cu2S_low, ZnS_zincblende, SnS, S2
import numpy as np
from DG_CZTS_S8 import plot_potential
T = np.linspace(100,1500,100) # K
P = np.array( np.logspace(1,7,100),ndmin=2).transpose() # Pa
D_mu = CZTS.mu_kJ(T,P) - (Cu2S_low.mu_kJ(T,P) +
ZnS_zincblende.mu_kJ(T,P) +
SnS.mu_kJ(T,P) +
0.5*S2.mu_kJ(T,P) )
D_mu_label = '$\Delta G_f$ / kJ mol$^{-1}$'
scale_range = [-300,100]
plot_potential(T,P,D_mu,D_mu_label,scale_range, filename='plots/DG_CZTS_SnS.png')
