def initializePlugin(mobject): mplugin = OpenMayaMPx.MFnPlugin(mobject, "Autodesk", "1.0", "Any") try: mplugin.registerCommand(kPluginCmdName, cmdCreator) except: sys.stderr.write( "Failed to register command: %s\n" % kPluginCmdName) raise try: mplugin.registerNode(kPluginNodeTypeName, kPluginNodeId, nodeCreator, nodeInitializer) except: sys.stderr.write( "Failed to register node: %s" % kPluginNodeTypeName) raise
def uninitializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterContextCommand(contextCmdName)
except:
print "Failed to deregister context command: %s" % contextCmdName
raise
try:
mplugin.deregisterNode(moveManipId)
except:
print "Failed to deregister node: %s" % nodeName
raise
def initializePlugin(mobject):
"""
Entry point for a plugin. It is called once -- immediately after the plugin is loaded.
This function registers all of the commands, nodes, contexts, etc... associated with the plugin.
It is required by all plugins.
:param plugin: MObject used to register the plugin using an MFnPlugin function set
"""
vendor = "Steven Qiu"
version = "2021.4.10.02"
mplugin = ompx.MFnPlugin(mobject, vendor, version)
mtor.initialize()
def initializePlugin(mobject):
"""
Initialize the script plug-in
"""
mplugin = OpenMayaMPx.MFnPlugin(mobject, "Audrey Deschamps-Brower",
"1.0.0")
for cmd in CMD_CLASSES:
try:
mplugin.registerCommand(cmd.commandName, cmd.cmdCreator,
cmd.syntaxCreator)
except:
sys.stderr.write("Failed to register command: {}\n".format(
cmd.commandName))
def initializePlugin(mobject):
""" Initializes the plug-in. """
mplugin = ompx.MFnPlugin(mobject)
try:
mplugin.registerTransform(
TestTransform.kNODE_NAME, TestTransform.kNODE_ID,
TestTransform.creator, TestTransform.initialize,
TestTransformMatrix.creator, TestTransformMatrix.kMATRIX_ID,
TestTransform.kNODE_CLASSIFY)
except:
sys.stderr.write("Failed to register node: " +
TestTransform.kNODE_NAME)
raise
def uninitializePlugin(mobject):
'''Deregister Plugin'''
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterCommand('MeshInfo')
mplugin.deregisterNode(twCheckCollision.TwCheckCollision.kPluginNodeId)
mplugin.deregisterNode(twDrawBB.TwDrawBB.kPluginNodeId)
mplugin.deregisterNode(twClothSolverIOPaperBlockout.
TwClothSolverIOPaperBlockout.kPluginNodeId)
except:
sys.stderr.write("Failed to deregister node: %s" % kPluginNodeName)
raise
def initializePlugin(plugin):
pluginFn = OpenMayaMPx.MFnPlugin(plugin)
try:
pluginFn.registerURIFileResolver(
adskHttpSchemeResolver.kPluginResolverName,
adskHttpSchemeResolver.kPluginURIScheme,
adskHttpSchemeResolver.theCreator)
except:
sys.stderr.write(
"Failed to register custom resolver: %s for scheme: %s\n" %
(adskHttpSchemeResolver.kPluginResolverName,
adskHttpSchemeResolver.kPluginURIScheme))
raise
def uninitializePlugin(plugin):
pluginFn = OpenMayaMPx.MFnPlugin(plugin)
try:
pluginFn.deregisterNode(kPluginNodeId)
OpenMaya.MNodeMessage.removeCallback(kCallbackID)
# pluginFn.deregisterCommand(kPluginNodeNameCommand)
# pluginFn.deregisterNode(kPluginNodeNameManipId)
# pm.callbacks(removeCallback=loadAETemplateCallback, hook='AETemplateCustomContent', owner=kPluginNodeName)
except:
sys.stderr.write('Failed to deregister node: ' + kPluginNodeName)
raise
def initializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject, "Autodesk", "1.0", "Any")
try:
mplugin.registerData(kPluginName, kPluginDataId, dataCreator)
except:
sys.stderr.write("Failed to register new data type: %s\n" % kPluginName)
raise
try:
mplugin.registerCommand(kPluginName, cmdCreator)
except:
sys.stderr.write("Failed to register command: %s\n" % kPluginName)
raise
def uninitializePlugin(plugin):
"""
Uninitialize the script plug-in
:param plugin: OpenMayaMPx.MPxCommand
"""
pluginFn = OpenMayaMPx.MFnPlugin(plugin)
try:
pluginFn.deregisterCommand(FitVertexCmd.kPluginCmdName)
except:
sys.stderr.write(
"Failed to unregister command: %s\n" % FitVertexCmd.kPluginCmdName
)
raise
def initializePlugin(obj):
plugin = OpenMayaMPx.MFnPlugin(obj, 'wedgie', '0.1', 'zanefx')
try:
plugin.registerCommand('makewedgie', cmdCreator, syntaxCreator)
except:
raise RuntimeError, 'Failed to register command: makewedgie'
try:
plugin.registerNode('wedgie', WedgeNode.kPluginNodeId, creator,
initialize)
except:
raise RuntimeError, 'Failed to register node: wedgie'
def uninitializePlugin(mObject):
mPlugin = OpenMayaMPx.MFnPlugin(mObject, __author__, __version__)
try:
mPlugin.deregisterNode(MeshInfoNode.kPluginNodeId)
except:
raise RuntimeError("Failed to deregister : {0}".format(
MeshInfoNode.kPluginNodeName))
try:
mPlugin.deregisterCommand(MeshInfoCommand.kPluginCommandName)
except:
raise RuntimeError("Failed to deregister : {0}".format(
MeshInfoCommand.kPluginCommandName))
def uninitializePlugin(mobject): mplugin = OpenMayaMPx.MFnPlugin(mobject) try: mplugin.deregisterNode( kPluginNodeId ) except: sys.stderr.write( "Failed to deregister command: %s" % kPluginNodeTypeName ) raise
def initializePlugin(mobject): ''' registerCommand is the only thing that will change here. ''' mplugin = OpenMayaMPx.MFnPlugin(mobject) #done before tyring to register the command. try: # registerCommand requires( commandName, creatorFunction # commandName normally is something like kPluginNodeTypeName # mplugin.registerCommmand( kMyCommandName, nodeCreator, nodeInitializer ) mplugin.registerCommand( kMyCommandName, cmdCreator) except: sys.stderr.write( "Failed to register command: %s\n" %kMyCommandName ) raise
def initializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject, "Autodesk", "1.0", "Any")
try:
mplugin.registerCommand(kCmdName, cmdCreator, cmdSyntaxCreator)
except:
sys.stderr.write("Failed to register command: %s" % kCmdName)
raise
try:
mplugin.registerNode(kNodeName, kNodeId, nodeCreator, nodeInitializer, OpenMayaMPx.MPxNode.kObjectSet)
except:
sys.stderr.write("Failed to register node: %s" % kNodeName)
raise
def uninitializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterCommand(kPluginName)
except:
sys.stderr.write("Failed to unregister command: %s\n" % kPluginName)
raise
try:
mplugin.deregisterData(kPluginDataId)
except:
sys.stderr.write("Failed to unregister data type: %s\n" % kPluginName)
raise
def uninitializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterCommand(kCmdName)
except:
sys.stderr.write("Failed to deregister command: %s" % kCmdName)
raise
try:
mplugin.deregisterNode(kNodeId)
except:
sys.stderr.write("Failed to deregister node: %s" % kNodeName)
raise
def uninitializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject)
mplugin.deregisterNode(MirrorNode.NODE_ID)
for cls in classesToRegister:
cmdName = cls.CMD_NAME
try:
mplugin.deregisterCommand(cmdName)
mplugin.deregisterCommand(cmdName.lower())
except:
self.displayError("Failed to unregister command: %s\n" % cmdName)
raise
def uninitializePlugin(mobject): # Remove the callback if IDs.length()!= 0: removeCallback( IDs ) mplugin = OpenMayaMPx.MFnPlugin(mobject) try: mplugin.deregisterCommand( kPluginNodeTypeName ) except: sys.stderr.write( "Failed to deregister node: %s" % kPluginNodeTypeName ) raise
def initializePlugin(mobject):
'''Register Plugin'''
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.registerCommand('MeshInfo', twMeshInfoCmd.createTwMeshInfoCmd)
mplugin.registerNode( twCheckCollision.TwCheckCollision.kPluginNodeName, twCheckCollision.TwCheckCollision.kPluginNodeId, twCheckCollision.createTwCheckCollision, twCheckCollision.initializeTwCheckCollision, OpenMayaMPx.MPxNode.kLocatorNode)
mplugin.registerNode( twDrawBB.TwDrawBB.kPluginNodeName, twDrawBB.TwDrawBB.kPluginNodeId, twDrawBB.createTwDrawBB, twDrawBB.initializeTwDrawBB, OpenMayaMPx.MPxNode.kLocatorNode)
mplugin.registerNode( twClothSolverIOPaperBlockout.TwClothSolverIOPaperBlockout.kPluginNodeName, twClothSolverIOPaperBlockout.TwClothSolverIOPaperBlockout.kPluginNodeId, twClothSolverIOPaperBlockout.createTwClothSolverIOPaperBlockout, twClothSolverIOPaperBlockout.initializeTwClothSolverIOPaperBlockout, OpenMayaMPx.MPxNode.kLocatorNode)
print('Successfully loaded plugin')
gui.Menubar()
except:
sys.stderr.write( "Failed to register node: %s" % kPluginNodeName )
raise
def uninitializePlugin(mobject):
global messageIdSet
global messageId
# Remove the callback
if (messageIdSet):
removeCallback(messageId)
# Remove the plug-in command
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterCommand(kPluginCmdName)
except:
sys.stderr.write("Failed to unregister command: %s\n" % kPluginCmdName)
raise
def initializePlugin(mobject):
""" Initialize the script plug-in
Args:
mobject (OpenMaya.MObject):
"""
mplugin = OpenMayaMPx.MFnPlugin(mobject, "Name", "1.0", "Any")
try:
mplugin.registerCommand(kPluginCmdName, cmdCreator, syntaxCreator)
except:
sys.stderr.write("Failed to register command: %s\n" % kPluginCmdName)
raise
def initializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject, "FXTD-odyssey", "1.0.0")
try:
mplugin.registerNode(nodeName, nodeId, deformerCreator,
nodeInitializer,
OpenMayaMPx.MPxNode.kDeformerNode)
''' This is to explicitly define that weights attribute of the deformer is paintable'''
OpenMaya.MGlobal.executeCommand(
"makePaintable -attrType \"multiFloat\" -sm deformer \"" +
nodeName + "\" \"weights\";")
except:
sys.stderr.write("Failed to register node: %s" % nodeName)
raise
def uninitializePlugin(mobject):
""" Uninitialize the script plug-in
Args:
mobject (OpenMaya.MObject):
"""
mplugin = OpenMayaMPx.MFnPlugin(mobject)
try:
mplugin.deregisterCommand(kPluginCmdName)
except:
sys.stderr.write("Failed to unregister command: %s\n" % kPluginCmdName)
raise
def initializePlugin(mobject):
plugin = OpenMayaMPx.MFnPlugin(mobject)
plugin.registerNode('zFileSwitch', zFileSwitch.pluginNodeId,
zFileSwitch.creator, zFileSwitch.initialize,
OpenMayaMPx.MPxNode.kDependNode)
# Register with the file path editor.
pm.filePathEditor(temporary=True, registerType='zFileSwitch.lowResolution')
pm.filePathEditor(temporary=True,
registerType='zFileSwitch.highResolution')
menu.add_menu_items()
copy_render_setup_template()
def initializePlugin(mobject):
mplugin = OpenMayaMPx.MFnPlugin(mobject, glueDeformer.AUTHOR,
glueDeformer.PLUGIN_VERSION, "Any")
try:
mplugin.registerNode(glueDeformer.PLUGIN_NODE_NAME,
glueDeformer.PLUGIN_NODE_ID,
glueDeformer._createNode,
glueDeformer._addAttributes,
OpenMayaMPx.MPxNode.kDeformerNode)
except:
raise Exception(glueDeformer.REGISTER_FAILLURE_MESSAGE)
def initializePlugin(mobject):
mplugin = OMPx.MFnPlugin(mobject,"TDChannel", "1.0", "Any")
try:
# register node
mplugin.registerNode(kTdcMddReadNodeName, tdcMddReadId,
nodeCreator, nodeInitializer,
OMPx.MPxNode.kDeformerNode )
# register command
mplugin.registerCommand(kTdcMddReadCmdName,
tdcMddReadCmdCreator,
tdcMddReadSyntaxCreator )
except:
sys.stderr.write("Failed to register node: %s\n"%kTdcMddReadNodeName)
def initializePlugin(obj):
"""
Initialize the plug-in
"""
plugin = ommpx.MFnPlugin(obj, 'Adam Mechtley & Ryan Trowbridge', '1.0',
'Any')
try:
plugin.registerCommand(AR_TransformCmd.kPluginCmdName,
AR_TransformCmd.cmdCreator,
AR_TransformCmd.syntaxCreator)
except:
raise Exception('Failed to register command: %s' %
AR_TransformCmd.kPluginCmdName)
def initializePlugin(plugin):
vendor = "AJ"
version = "b.1.0.0"
plugin_fn = ommpx.MFnPlugin(plugin, vendor, version)
try:
plugin_fn.registerNode(CarpetRoll.TYPE_NAME, CarpetRoll.TYPE_ID,
CarpetRoll.creator, CarpetRoll.initialize,
ommpx.MPxNode.kDeformerNode)
except:
pm.displayError("Failed to register node {0}".format(
CarpetRoll.TYPE_NAME))
def initializePlugin(obj):
plugin = omMPx.MFnPlugin(obj, "Roy Nieterau", "0.1")
# Register nodes
for node in nodes:
try:
plugin.registerNode(node.pluginNodeTypeName,
node.id,
node.creator,
node.nodeInitialize)
except RuntimeError, e:
mc.warning("Can't register plug-in node "
"{0}: {1}".format(node.pluginNodeTypeName, e))
