class FilletDigitizingMode(QgsMapToolEmitPoint):
MESSAGE_HEADER = "Fillet"
DEFAULT_FILLET_RADIUS = 0
def __init__(self, iface):
self.iface = iface
QgsMapToolEmitPoint.__init__(self, self.iface.mapCanvas())
self.messageBarUtils = MessageBarUtils(iface)
self.segmentFinderTool = SegmentFinderTool(self.iface.mapCanvas())
self.rubberBandSegment1 = QgsRubberBand(self.iface.mapCanvas())
self.rubberBandSegment1.setColor(QColor(255, 0, 0))
self.rubberBandSegment1.setWidth(2)
self.layer = None
self.reset()
def setLayer(self, layer):
self.layer = layer
def reset(self, clearMessages=True):
self.step = 0
self.segment1 = None
self.segment2 = None
self.rubberBandSegment1.reset(QGis.Line)
try:
self.segmentFinderTool.segmentFound.disconnect()
except Exception:
pass
if clearMessages:
self.messageBarUtils.removeAllMessages()
def resetFillet(self):
self.reset(False)
def deactivate(self):
self.reset()
QgsMapToolEmitPoint.deactivate(self)
def next(self):
if self.step == 0:
self.messageBarUtils.showButton(
FilletDigitizingMode.MESSAGE_HEADER,
"Select first segment",
"Done",
buttonCallback=self.done)
self.currentMapTool = self.segmentFinderTool
self.segmentFinderTool.segmentFound.connect(self.segment1Found)
elif self.step == 1:
filletRadius, found = QgsProject.instance().readEntry(
constants.SETTINGS_KEY, constants.SETTINGS_FILLET_RADIUS, None)
if not found:
filletRadius = str(FilletDigitizingMode.DEFAULT_FILLET_RADIUS)
_, lineEdit = self.messageBarUtils.showLineEdit(
FilletDigitizingMode.MESSAGE_HEADER,
"Select second segment and set radius:", filletRadius)
self.lineEditFilletRadius = lineEdit
self.currentMapTool = self.segmentFinderTool
self.segmentFinderTool.segmentFound.connect(self.segment2Found)
elif self.step == 2:
self.filletRadius = self.lineEditFilletRadius.text()
self.doFillet()
def segment1Found(self, result, pointClicked):
self.segment1 = result
self.segmentFinderTool.segmentFound.disconnect(self.segment1Found)
self.segmentFinderTool.deactivate()
self.rubberBandSegment1.reset(QGis.Line)
self.rubberBandSegment1.addPoint(result.beforeVertex)
self.rubberBandSegment1.addPoint(result.afterVertex, True)
self.rubberBandSegment1.show()
self.step = 1
self.next()
def segment2Found(self, result, pointClicked):
self.segment2 = result
self.segmentFinderTool.segmentFound.disconnect(self.segment2Found)
self.segmentFinderTool.deactivate()
self.step = 2
self.next()
def doFillet(self):
self.messageBarUtils.showMessage(FilletDigitizingMode.MESSAGE_HEADER,
"Running...",
QgsMessageBar.INFO,
duration=0)
try:
crsDest = self.layer.crs()
canvas = self.iface.mapCanvas()
mapRenderer = canvas.mapSettings()
crsSrc = mapRenderer.destinationCrs()
crsTransform = QgsCoordinateTransform(crsSrc, crsDest)
self.layer.beginEditCommand(FilletDigitizingMode.MESSAGE_HEADER)
try:
filletRadius = float(self.filletRadius)
# save for next time
QgsProject.instance().writeEntry(
constants.SETTINGS_KEY, constants.SETTINGS_FILLET_RADIUS,
filletRadius)
except ValueError:
filletRadius = FilletDigitizingMode.DEFAULT_FILLET_RADIUS
# do initial computations in map canvas coordinates
# check intersection
extendUtils = ExtendUtils(self.iface)
ip = extendUtils.intersectionPoint(self.segment1.beforeVertex,
self.segment1.afterVertex,
self.segment2.beforeVertex,
self.segment2.afterVertex)
if ip == None:
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER,
"The 2 segments do not intersect. Nothing was done.",
QgsMessageBar.WARNING,
duration=5)
self.layer.destroyEditCommand()
return
if filletRadius == 0:
# reproject to layer coordinates
ip = crsTransform.transform(ip)
# just extend the 2 lines
ok1 = self.extend(ip, self.segment1, extendUtils)
ok2 = self.extend(ip, self.segment2, extendUtils)
if ok1 and ok2:
self.iface.mapCanvas().refresh()
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER, "Success",
QgsMessageBar.INFO, 5)
self.layer.endEditCommand()
else:
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER,
"Cannot fillet segments: Amibiguous extension",
QgsMessageBar.WARNING, 5)
self.layer.destroyEditCommand()
else:
(pa, p1, p2, revert1, revert2) = self.computeArcParameters(
ip, self.segment1, self.segment2, filletRadius,
extendUtils)
if pa == None:
# radius is too big
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER,
"A fillet cannot be created with those arcs.",
QgsMessageBar.WARNING,
duration=5)
return
settings = QSettings()
method = settings.value(constants.ARC_METHOD, "")
if method == constants.ARC_METHOD_NUMBEROFPOINTS:
value = settings.value(constants.ARC_NUMBEROFPOINTS,
0,
type=int)
else:
value = settings.value(constants.ARC_ANGLE, 0, type=float)
# g is still in CRS of map
g = CircularArc.getInterpolatedArc(p1, pa, p2, method, value)
arcVertices = g.asPolyline()
if len(arcVertices) >= 2:
projArcVertices = []
for vertex in arcVertices:
projArcVertices.append(crsTransform.transform(vertex))
outFeat = QgsFeature()
fields = self.layer.dataProvider().fields()
outFeat.setAttributes([None] * fields.count())
outFeat.setGeometry(
QgsGeometry.fromPolyline(projArcVertices))
self.layer.addFeature(outFeat)
# trim segments
p1 = crsTransform.transform(p1)
feature1 = self.getFeature(self.segment1)
geom1 = feature1.geometry()
geom1.insertVertex(p1.x(), p1.y(),
self.segment1.afterVertexNr)
if revert1:
geom1.deleteVertex(self.segment1.afterVertexNr +
1) # insertion above => +1
else:
geom1.deleteVertex(self.segment1.beforeVertexNr)
self.layer.changeGeometry(feature1.id(), geom1)
p2 = crsTransform.transform(p2)
feature2 = self.getFeature(self.segment2)
geom2 = feature2.geometry()
geom2.insertVertex(p2.x(), p2.y(),
self.segment2.afterVertexNr)
if revert2:
geom2.deleteVertex(self.segment2.afterVertexNr +
1) # insertion above => +1
else:
geom2.deleteVertex(self.segment2.beforeVertexNr)
self.layer.changeGeometry(feature2.id(), geom2)
self.iface.mapCanvas().refresh()
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER, "Success",
QgsMessageBar.INFO, 5)
self.layer.endEditCommand()
else:
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER,
"No arc was created",
QgsMessageBar.WARNING,
duration=5)
self.layer.destroyEditCommand()
except Exception as e:
QgsMessageLog.logMessage(repr(e))
self.messageBarUtils.removeAllMessages()
self.messageBarUtils.showMessage(
FilletDigitizingMode.MESSAGE_HEADER,
"There was an error performing this command. See QGIS Message log for details.",
QgsMessageBar.CRITICAL,
duration=5)
self.layer.destroyEditCommand()
return
finally:
# select another fillet
self.resetFillet()
self.next()
def extend(self, ip, snapSegment, extendUtils):
featureExtend = self.getFeature(snapSegment)
geometryExtend = featureExtend.geometry()
bvExtend = geometryExtend.vertexAt(snapSegment.beforeVertexNr)
avExtend = geometryExtend.vertexAt(snapSegment.afterVertexNr)
number = extendUtils.vertexIndexToMove(bvExtend, avExtend, snapSegment,
ip)
if number == None:
# not an extend
return False
else:
fid = featureExtend.id()
geometryExtend.moveVertex(ip.x(), ip.y(), number)
self.layer.changeGeometry(fid, geometryExtend)
return True
def computeArcParameters(self, ip, snapSegment1, snapSegment2,
filletRadius, extendUtils):
bvExtend1 = snapSegment1.beforeVertex
avExtend1 = snapSegment1.afterVertex
# TODO => mustExtend =True and check the 2 segment have the same endpoint at ip (with some tolerance)
iVToMove1 = extendUtils.vertexIndexToMove(bvExtend1,
avExtend1,
snapSegment1,
ip,
mustExtend=False)
bvExtend2 = snapSegment2.beforeVertex
avExtend2 = snapSegment2.afterVertex
iVToMove2 = extendUtils.vertexIndexToMove(bvExtend2,
avExtend2,
snapSegment2,
ip,
mustExtend=False)
qDebug(repr(iVToMove1) + " " + repr(iVToMove2))
if iVToMove1 == None or iVToMove2 == None:
return (None, None, None, None, None)
segment1 = [bvExtend1, avExtend1]
segment2 = [bvExtend2, avExtend2]
# determine intersection point (ip) and revert if needed
revert1 = False
revert2 = False
if iVToMove1 == snapSegment1.beforeVertexNr:
segment1[0] = ip
else:
revert1 = True
segment1[1] = segment1[0]
segment1[0] = ip
if iVToMove2 == snapSegment2.beforeVertexNr:
segment2[0] = ip
else:
revert2 = True
segment2[1] = segment2[0]
segment2[0] = ip
lengthSegment1 = self.length(segment1)
normedSegment1 = self.norm(segment1, lengthSegment1)
lengthSegment2 = self.length(segment2)
normedSegment2 = self.norm(segment2, lengthSegment2)
midp1 = self.pointAtDist(normedSegment1, filletRadius)
midp2 = self.pointAtDist(normedSegment2, filletRadius)
# get point on bisector
midp = QgsPoint((midp1.x() + midp2.x()) / 2.0,
(midp1.y() + midp2.y()) / 2.0)
# get angles along lines from intersection
ang1 = self.angleFromX(ip, midp1)
ang2 = self.angleFromX(ip, midp2)
# get bisector angle
ang = self.angleFromX(ip, midp)
# get a half of angle between segments
bis = abs(ang2 - ang1) / 2.0
# calculate hypotenuse (fillet draws slice of circle tangent to segments)
hyp = filletRadius / math.sin(bis)
# calculate another leg of a triangle
cat = math.sqrt(hyp**2 - filletRadius**2)
if cat > self.length(segment1) or cat > self.length(segment2):
# radius is too big => nothing done
return (None, None, None, None, None)
# calculate point on arc
pa = self.polarPoint(ip, ang, hyp - filletRadius)
# calculate start point of arc
p1 = self.polarPoint(ip, ang1, cat)
# calculate end point of arc
p2 = self.polarPoint(ip, ang2, cat)
return (pa, p1, p2, revert1, revert2)
def length(self, segment):
return math.sqrt((segment[0].x() - segment[1].x())**2 +
(segment[0].y() - segment[1].y())**2)
def norm(self, segment, length):
return [
segment[0],
QgsPoint(
segment[0].x() + (segment[1].x() - segment[0].x()) / length,
segment[0].y() + (segment[1].y() - segment[0].y()) / length)
]
def pointAtDist(self, normedSegment, dist):
return QgsPoint(
normedSegment[0].x() + dist *
(normedSegment[1].x() - normedSegment[0].x()),
normedSegment[0].y() + dist *
(normedSegment[1].y() - normedSegment[0].y()))
def polarPoint(self, basepoint, angle, distance):
return QgsPoint(basepoint.x() + (distance * math.cos(angle)),
basepoint.y() + (distance * math.sin(angle)))
def angleFromX(self, pt1, pt2):
dx = pt2.x() - pt1.x()
dy = pt2.y() - pt1.y()
ang = math.atan2(dy, dx)
if ang < 0.0:
return ang + 2.0 * math.pi
else:
return ang
def getFeature(self, snappingResult):
fid = snappingResult.snappedAtGeometry
feature = QgsFeature()
fiter = self.layer.getFeatures(QgsFeatureRequest(fid))
if fiter.nextFeature(feature):
return feature
return None
def done(self):
self.reset()
self.iface.mapCanvas().unsetMapTool(self)
def enter(self):
#ignore
pass
def canvasPressEvent(self, e):
if e.button() == Qt.RightButton:
if self.step == 0:
self.done()
return
if self.currentMapTool:
self.currentMapTool.canvasPressEvent(e)
def canvasReleaseEvent(self, e):
if self.currentMapTool:
self.currentMapTool.canvasReleaseEvent(e)
def canvasMoveEvent(self, e):
if self.currentMapTool:
self.currentMapTool.canvasMoveEvent(e)
class ScaleDigitizingMode(QgsMapToolEmitPoint):
MESSAGE_HEADER = "Scale"
DEFAULT_SCALE_FACTOR = 2.0
def __init__(self, iface, digitizingTools):
self.iface = iface
self.digitizingTools = digitizingTools
QgsMapToolEmitPoint.__init__(self, self.iface.mapCanvas())
self.messageBarUtils = MessageBarUtils(iface)
self.rubberBandSnap = QgsRubberBand(self.iface.mapCanvas())
self.rubberBandSnap.setColor(QColor(255, 51, 153))
self.rubberBandSnap.setIcon(QgsRubberBand.ICON_CROSS)
self.rubberBandSnap.setIconSize(12)
self.rubberBandSnap.setWidth(3)
# we need a snapper, so we use the MapCanvas snapper
self.snapper = QgsMapCanvasSnapper(self.iface.mapCanvas())
self.layer = None
self.reset()
def setLayer(self, layer):
self.layer = layer
def reset(self, clearMessages=True):
self.step = 0
self.rubberBandSnap.reset(QGis.Point)
if clearMessages:
self.messageBarUtils.removeAllMessages()
def deactivate(self):
self.reset()
super(QgsMapToolEmitPoint, self).deactivate()
def next(self):
if self.step == 0:
scaleFactor, found = QgsProject.instance().readEntry(
constants.SETTINGS_KEY, constants.SETTINGS_SCALE_FACTOR, None)
if not found:
scaleFactor = str(ScaleDigitizingMode.DEFAULT_SCALE_FACTOR)
_, lineEdit = self.messageBarUtils.showLineEdit(
ScaleDigitizingMode.MESSAGE_HEADER,
"Draw base point and set scale:", scaleFactor)
self.lineEditScaleFactor = lineEdit
elif self.step == 1:
self.scaleFactor = self.lineEditScaleFactor.text()
if self.layer.selectedFeatureCount() == 0:
self.messageBarUtils.showYesCancel(
ScaleDigitizingMode.MESSAGE_HEADER,
"No feature selected in Layer %s. Proceed on full layer?" %
self.layer.name(), QgsMessageBar.WARNING, self.doScale)
return
self.doScale()
def doScale(self):
_, progress = self.messageBarUtils.showProgress(
ScaleDigitizingMode.MESSAGE_HEADER, "Running...",
QgsMessageBar.INFO)
try:
# get the actual vertices from the geometry instead of the snapping
crsDest = self.layer.crs()
canvas = self.iface.mapCanvas()
mapRenderer = canvas.mapSettings()
crsSrc = mapRenderer.destinationCrs()
crsTransform = QgsCoordinateTransform(crsSrc, crsDest)
# arcnode is still in map canvas coordinate => transform to layer coordinate
self.basePoint = crsTransform.transform(self.basePoint)
try:
scaleFactor = float(self.scaleFactor)
# save for next time
QgsProject.instance().writeEntry(
constants.SETTINGS_KEY, constants.SETTINGS_SCALE_FACTOR,
scaleFactor)
except ValueError:
scaleFactor = ScaleDigitizingMode.DEFAULT_SCALE_FACTOR
self.iface.mapCanvas().freeze(True)
outFeat = QgsFeature()
inGeom = QgsGeometry()
current = 0
features = vectorlayerutils.features(self.layer)
total = 100.0 / float(len(features))
for f in features:
inGeom = f.geometry()
attrs = f.attributes()
# break into multiple geometries if needed
if inGeom.isMultipart():
geometries = inGeom.asMultiPolyline()
outGeom = []
for g in geometries:
polyline = self.scalePolyline(g, scaleFactor)
outGeom.append(polyline)
outGeom = QgsGeometry.fromMultiPolyline(outGeom)
else:
polyline = self.scalePolyline(inGeom.asPolyline(),
scaleFactor)
outGeom = QgsGeometry.fromPolyline(polyline)
outFeat.setAttributes(attrs)
outFeat.setGeometry(outGeom)
self.layer.addFeature(outFeat)
self.layer.deleteFeature(f.id())
current += 1
progress.setValue(int(current * total))
except Exception as e:
QgsMessageLog.logMessage(repr(e))
self.messageBarUtils.showMessage(
ScaleDigitizingMode.MESSAGE_HEADER,
"There was an error performing this command. See QGIS Message log for details.",
QgsMessageBar.CRITICAL,
duration=5)
self.layer.destroyEditCommand()
return
finally:
self.iface.mapCanvas().freeze(False)
self.iface.mapCanvas().refresh()
# if here: Success!
self.messageBarUtils.showMessage(ScaleDigitizingMode.MESSAGE_HEADER,
"Success", QgsMessageBar.INFO, 5)
self.layer.endEditCommand()
self.iface.mapCanvas().unsetMapTool(self)
def scalePolyline(self, polyline, scaleFactor):
for vertex in polyline:
# scale
relBP = QgsPoint(vertex.x() - self.basePoint.x(),
vertex.y() - self.basePoint.y())
vertex.setX(self.basePoint.x() + scaleFactor * relBP.x())
vertex.setY(self.basePoint.y() + scaleFactor * relBP.y())
return polyline
def enter(self):
#ignore
pass
def canvasPressEvent(self, e):
pass
def canvasReleaseEvent(self, e):
pos = QPoint(e.pos().x(), e.pos().y())
result = self.snap(pos)
if result != []:
self.basePoint = result[0].snappedVertex
else:
self.basePoint = self.toMapCoordinates(e.pos())
self.step = 1
self.next()
def canvasMoveEvent(self, e):
pos = QPoint(e.pos().x(), e.pos().y())
result = self.snap(pos)
self.rubberBandSnap.reset(QGis.Point)
if result != []:
self.rubberBandSnap.addPoint(result[0].snappedVertex, True)
def snap(self, pos):
if self.digitizingTools.isBackgroundSnapping:
(_, result) = self.snapper.snapToBackgroundLayers(pos)
else:
(_,
result) = self.snapper.snapToCurrentLayer(pos,
QgsSnapper.SnapToVertex)
return result