def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.pos["root"], self.guide.pos["neck"])
dist_node = node.createDistNode(self.root, self.ik_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_loc.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan0_loc + ".ty")
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_loc.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_loc.attr("ty"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5,
.5, .5)
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = applyop.pathCns(self.div_cns[i], self.slv_crv, False, u,
True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 2) # front axis is 'Z'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.intMRef + ".worldMatrix", self.ik_ctl + ".worldMatrix", u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# Squash n Stretch
op = applyop.gear_squashstretch2_op(self.fk_npo[i], self.root,
pm.arclen(self.slv_crv), "y")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
op.setAttr("driver_min", .1)
# scl compas
if i != 0:
div_node = node.createDivNode([1, 1, 1], [
self.fk_npo[i - 1] + ".sx", self.fk_npo[i - 1] + ".sy",
self.fk_npo[i - 1] + ".sz"
])
pm.connectAttr(div_node + ".output",
self.scl_npo[i] + ".scale")
# Controlers
if i == 0:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"))
else:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(mulmat_node + ".output")
pm.connectAttr(dm_node + ".outputTranslate",
self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == self.settings["division"] - 1:
dm_node = node.createDecomposeMatrixNode(self.ik_ctl +
".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# Head ---------------------------------------------
self.fk_ctl[-1].addChild(self.head_cns)
# scale compensation
dm_node = node.createDecomposeMatrixNode(self.scl_npo[0] +
".parentInverseMatrix")
pm.connectAttr(dm_node + ".outputScale", self.scl_npo[0] + ".scale")
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Auto bend ----------------------------
if self.settings["autoBend"]:
mul_node = node.createMulNode(
[self.autoBendChain[0].ry, self.autoBendChain[0].rz],
[self.sideBend_att, self.frontBend_att])
mul_node.outputX >> self.ik1autoRot_lvl.rz
mul_node.outputY >> self.ik1autoRot_lvl.rx
self.ikHandleAutoBend = primitive.addIkHandle(
self.autoBend_ctl,
self.getName("ikHandleAutoBend"),
self.autoBendChain, "ikSCsolver")
# Tangent position ---------------------------------
# common part
d = vector.getDistance(self.guide.apos[0], self.guide.apos[1])
dist_node = node.createDistNode(self.ik0_ctl, self.ik1_ctl)
rootWorld_node = node.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = node.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = node.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = node.createMulNode(self.tan0_att,
self.tan0_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX",
self.tan0_npo.attr("ty"))
# tan1
mul_node = node.createMulNode(self.tan1_att,
self.tan1_npo.getAttr("ty"))
res_node = node.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
pm.connectAttr(res_node + ".outputX", self.tan1_npo.attr("ty"))
# Tangent Mid --------------------------------------
if self.settings["centralTangent"]:
tanIntMat = applyop.gear_intmatrix_op(
self.tan0_npo.attr("worldMatrix"),
self.tan1_npo.attr("worldMatrix"),
.5)
applyop.gear_mulmatrix_op(
tanIntMat.attr("output"),
self.tan_npo.attr("parentInverseMatrix[0]"),
self.tan_npo)
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan0_off.attr("translate"))
pm.connectAttr(self.tan_ctl.attr("translate"),
self.tan1_off.attr("translate"))
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(
self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.maxstretch_att, op + ".maxstretch")
pm.connectAttr(self.maxsquash_att, op + ".maxsquash")
pm.connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = node.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = applyop.pathCns(
self.div_cns[i], self.slv_crv, False, u, True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 0) # front axis is 'X'
# Roll
intMatrix = applyop.gear_intmatrix_op(
self.ik0_ctl + ".worldMatrix",
self.ik1_ctl + ".worldMatrix",
u)
dm_node = node.createDecomposeMatrixNode(intMatrix + ".output")
pm.connectAttr(dm_node + ".outputRotate",
self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i],
self.ref_twist[i],
maintainOffset=True)
pm.connectAttr(self.ref_twist[i] + ".translate",
cns + ".worldUpVector")
# compensate scale reference
div_node = node.createDivNode([1, 1, 1],
[rootWorld_node + ".outputScaleX",
rootWorld_node + ".outputScaleY",
rootWorld_node + ".outputScaleZ"])
# Squash n Stretch
op = applyop.gear_squashstretch2_op(
self.scl_transforms[i],
self.root,
pm.arclen(self.slv_crv),
"y",
div_node + ".output")
pm.connectAttr(self.volume_att, op + ".blend")
pm.connectAttr(crv_node + ".arcLength", op + ".driver")
pm.connectAttr(self.st_att[i], op + ".stretch")
pm.connectAttr(self.sq_att[i], op + ".squash")
# Controlers
if i == 0:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(
mulmat_node + ".output")
pm.connectAttr(dm_node + ".outputTranslate",
self.fk_npo[i].attr("t"))
else:
mulmat_node = applyop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = node.createDecomposeMatrixNode(
mulmat_node + ".output")
mul_node = node.createMulNode(div_node + ".output",
dm_node + ".outputTranslate")
pm.connectAttr(mul_node + ".output",
self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == 0:
dm_node = node.createDecomposeMatrixNode(
self.ik0_ctl + ".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"],
self.lock_ori0_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
elif i == self.settings["division"] - 1:
dm_node = node.createDecomposeMatrixNode(
self.ik1_ctl + ".worldMatrix")
blend_node = node.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"],
self.lock_ori1_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# Connections (Hooks) ------------------------------
pm.parentConstraint(self.scl_transforms[0], self.cnx0)
pm.scaleConstraint(self.scl_transforms[0], self.cnx0)
pm.parentConstraint(self.scl_transforms[-1], self.cnx1)
pm.scaleConstraint(self.scl_transforms[-1], self.cnx1)
def eyeRig(eyeMesh,
edgeLoop,
blinkH,
namePrefix,
offset,
rigidLoops,
falloffLoops,
headJnt,
doSkin,
parent=None,
ctlName="ctl",
sideRange=False,
customCorner=False,
intCorner=None,
extCorner=None,
ctlGrp=None,
defGrp=None):
"""Create eyelid and eye rig
Args:
eyeMesh (TYPE): Description
edgeLoop (TYPE): Description
blinkH (TYPE): Description
namePrefix (TYPE): Description
offset (TYPE): Description
rigidLoops (TYPE): Description
falloffLoops (TYPE): Description
headJnt (TYPE): Description
doSkin (TYPE): Description
parent (None, optional): Description
ctlName (str, optional): Description
sideRange (bool, optional): Description
customCorner (bool, optional): Description
intCorner (None, optional): Description
extCorner (None, optional): Description
ctlGrp (None, optional): Description
defGrp (None, optional): Description
Returns:
TYPE: Description
"""
# Checkers
if edgeLoop:
edgeLoopList = [pm.PyNode(e) for e in edgeLoop.split(",")]
else:
pm.displayWarning("Please set the edge loop first")
return
if eyeMesh:
try:
eyeMesh = pm.PyNode(eyeMesh)
except pm.MayaNodeError:
pm.displayWarning("The object %s can not be found in the "
"scene" % (eyeMesh))
return
else:
pm.displayWarning("Please set the eye mesh first")
if doSkin:
if not headJnt:
pm.displayWarning("Please set the Head Jnt or unCheck "
"Compute Topological Autoskin")
return
# Initial Data
bboxCenter = meshNavigation.bboxCenter(eyeMesh)
extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange)
upPos = extr_v[0]
lowPos = extr_v[1]
inPos = extr_v[2]
outPos = extr_v[3]
edgeList = extr_v[4]
vertexList = extr_v[5]
# Detect the side L or R from the x value
if inPos.getPosition(space='world')[0] < 0.0:
side = "R"
inPos = extr_v[3]
outPos = extr_v[2]
normalPos = outPos
npw = normalPos.getPosition(space='world')
normalVec = npw - bboxCenter
else:
side = "L"
normalPos = outPos
npw = normalPos.getPosition(space='world')
normalVec = bboxCenter - npw
# Manual Vertex corners
if customCorner:
if intCorner:
try:
if side == "R":
inPos = pm.PyNode(extCorner)
else:
inPos = pm.PyNode(intCorner)
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % intCorner)
return
else:
pm.displayWarning("Please set the internal eyelid corner")
return
if extCorner:
try:
normalPos = pm.PyNode(extCorner)
npw = normalPos.getPosition(space='world')
if side == "R":
outPos = pm.PyNode(intCorner)
normalVec = npw - bboxCenter
else:
outPos = pm.PyNode(extCorner)
normalVec = bboxCenter - npw
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % extCorner)
return
else:
pm.displayWarning("Please set the external eyelid corner")
return
# Check if we have prefix:
if namePrefix:
namePrefix = string.removeInvalidCharacter(namePrefix)
else:
pm.displayWarning("Prefix is needed")
return
def setName(name, ind=None):
namesList = [namePrefix, side, name]
if ind is not None:
namesList[1] = side + str(ind)
name = "_".join(namesList)
return name
if pm.ls(setName("root")):
pm.displayWarning("The object %s already exist in the scene. Please "
"choose another name prefix" % setName("root"))
return
# Eye root
eye_root = primitive.addTransform(None, setName("root"))
eyeCrv_root = primitive.addTransform(eye_root, setName("crvs"))
# Eyelid Main crvs
try:
upEyelid = meshNavigation.edgeRangeInLoopFromMid(
edgeList, upPos, inPos, outPos)
upCrv = curve.createCurveFromOrderedEdges(
upEyelid, inPos, setName("upperEyelid"), parent=eyeCrv_root)
upCrv_ctl = curve.createCurveFromOrderedEdges(
upEyelid, inPos, setName("upCrv_%s" % ctlName), parent=eyeCrv_root)
pm.rebuildCurve(upCrv_ctl, s=2, rt=0, rpo=True, ch=False)
lowEyelid = meshNavigation.edgeRangeInLoopFromMid(
edgeList, lowPos, inPos, outPos)
lowCrv = curve.createCurveFromOrderedEdges(
lowEyelid, inPos, setName("lowerEyelid"), parent=eyeCrv_root)
lowCrv_ctl = curve.createCurveFromOrderedEdges(
lowEyelid,
inPos,
setName("lowCrv_%s" % ctlName),
parent=eyeCrv_root)
pm.rebuildCurve(lowCrv_ctl, s=2, rt=0, rpo=True, ch=False)
except UnboundLocalError:
if customCorner:
pm.displayWarning("This error is maybe caused because the custom "
"Corner vertex is not part of the edge loop")
pm.displayError(traceback.format_exc())
return
upBlink = curve.createCurveFromCurve(
upCrv, setName("upblink_crv"), nbPoints=30, parent=eyeCrv_root)
lowBlink = curve.createCurveFromCurve(
lowCrv, setName("lowBlink_crv"), nbPoints=30, parent=eyeCrv_root)
upTarget = curve.createCurveFromCurve(
upCrv, setName("upblink_target"), nbPoints=30, parent=eyeCrv_root)
lowTarget = curve.createCurveFromCurve(
lowCrv, setName("lowBlink_target"), nbPoints=30, parent=eyeCrv_root)
midTarget = curve.createCurveFromCurve(
lowCrv, setName("midBlink_target"), nbPoints=30, parent=eyeCrv_root)
rigCrvs = [upCrv,
lowCrv,
upCrv_ctl,
lowCrv_ctl,
upBlink,
lowBlink,
upTarget,
lowTarget,
midTarget]
for crv in rigCrvs:
crv.attr("visibility").set(False)
# localBBOX
localBBox = eyeMesh.getBoundingBox(invisible=True, space='world')
wRadius = abs((localBBox[0][0] - localBBox[1][0]))
dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7)
# Groups
if not ctlGrp:
ctlGrp = "rig_controllers_grp"
try:
ctlSet = pm.PyNode(ctlGrp)
except pm.MayaNodeError:
pm.sets(n=ctlGrp, em=True)
ctlSet = pm.PyNode(ctlGrp)
if not defGrp:
defGrp = "rig_deformers_grp"
try:
defset = pm.PyNode(defGrp)
except pm.MayaNodeError:
pm.sets(n=defGrp, em=True)
defset = pm.PyNode(defGrp)
# Calculate center looking at
averagePosition = ((upPos.getPosition(space='world')
+ lowPos.getPosition(space='world')
+ inPos.getPosition(space='world')
+ outPos.getPosition(space='world'))
/ 4)
if side == "R":
negate = False
offset = offset
over_offset = dRadius
else:
negate = False
over_offset = dRadius
if side == "R" and sideRange or side == "R" and customCorner:
axis = "z-x"
# axis = "zx"
else:
axis = "z-x"
t = transform.getTransformLookingAt(
bboxCenter,
averagePosition,
normalVec,
axis=axis,
negate=negate)
over_npo = primitive.addTransform(
eye_root, setName("center_lookatRoot"), t)
over_ctl = icon.create(over_npo,
setName("over_%s" % ctlName),
t,
icon="square",
w=wRadius,
d=dRadius,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, over_offset),
color=4)
node.add_controller_tag(over_ctl)
attribute.add_mirror_config_channels(over_ctl)
attribute.setKeyableAttributes(
over_ctl,
params=["tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz"])
if side == "R":
over_npo.attr("rx").set(over_npo.attr("rx").get() * -1)
over_npo.attr("ry").set(over_npo.attr("ry").get() + 180)
over_npo.attr("sz").set(-1)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=over_ctl)
center_lookat = primitive.addTransform(
over_ctl, setName("center_lookat"), t)
# Tracking
# Eye aim control
t_arrow = transform.getTransformLookingAt(bboxCenter,
averagePosition,
upPos.getPosition(space='world'),
axis="zy", negate=False)
radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7)
arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"), t_arrow)
arrow_ctl = icon.create(arrow_npo,
setName("aim_%s" % ctlName),
t_arrow,
icon="arrow",
w=1,
po=datatypes.Vector(0, 0, radius),
color=4)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=arrow_ctl)
attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"])
# tracking custom trigger
if side == "R":
tt = t_arrow
else:
tt = t
aimTrigger_root = primitive.addTransform(
center_lookat, setName("aimTrigger_root"), tt)
aimTrigger_lvl = primitive.addTransform(
aimTrigger_root, setName("aimTrigger_lvl"), tt)
aimTrigger_lvl.attr("tz").set(1.0)
aimTrigger_ref = primitive.addTransform(
aimTrigger_lvl, setName("aimTrigger_ref"), tt)
aimTrigger_ref.attr("tz").set(0.0)
# connect trigger with arrow_ctl
pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True)
# Controls lists
upControls = []
trackLvl = []
# upper eyelid controls
upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"]
cvs = upCrv_ctl.getCVs(space="world")
if side == "R" and not sideRange:
# if side == "R":
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
if utils.is_odd(i):
color = 14
wd = .5
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = .7
icon_shape = "square"
params = ["tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz"]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % upperCtlNames[i]),
t)
npoBase = npo
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % upperCtlNames[i]),
t)
trackLvl.append(npo)
ctl = icon.create(npo,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color)
attribute.add_mirror_config_channels(ctl)
node.add_controller_tag(ctl, over_ctl)
upControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl)
attribute.setKeyableAttributes(ctl, params)
if side == "R":
npoBase.attr("ry").set(180)
npoBase.attr("sz").set(-1)
# adding parent average contrains to odd controls
for i, ctl in enumerate(upControls):
if utils.is_odd(i):
pm.parentConstraint(upControls[i - 1],
upControls[i + 1],
ctl.getParent(),
mo=True)
# lower eyelid controls
lowControls = [upControls[0]]
lowerCtlNames = ["inCorner",
"lowInMid",
"lowMid",
"lowOutMid",
"outCorner"]
cvs = lowCrv_ctl.getCVs(space="world")
if side == "R" and not sideRange:
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
# we skip the first and last point since is already in the uper eyelid
if i in [0, 4]:
continue
if utils.is_odd(i):
color = 14
wd = .5
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = .7
icon_shape = "square"
params = ["tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz"]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % lowerCtlNames[i]),
t)
npoBase = npo
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % lowerCtlNames[i]),
t)
trackLvl.append(npo)
ctl = icon.create(npo,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color)
attribute.add_mirror_config_channels(ctl)
lowControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl)
attribute.setKeyableAttributes(ctl, params)
# mirror behaviout on R side controls
if side == "R":
npoBase.attr("ry").set(180)
npoBase.attr("sz").set(-1)
for lctl in reversed(lowControls[1:]):
node.add_controller_tag(lctl, over_ctl)
lowControls.append(upControls[-1])
# adding parent average contrains to odd controls
for i, ctl in enumerate(lowControls):
if utils.is_odd(i):
pm.parentConstraint(lowControls[i - 1],
lowControls[i + 1],
ctl.getParent(),
mo=True)
# Connecting control crvs with controls
applyop.gear_curvecns_op(upCrv_ctl, upControls)
applyop.gear_curvecns_op(lowCrv_ctl, lowControls)
# adding wires
w1 = pm.wire(upCrv, w=upBlink)[0]
w2 = pm.wire(lowCrv, w=lowBlink)[0]
w3 = pm.wire(upTarget, w=upCrv_ctl)[0]
w4 = pm.wire(lowTarget, w=lowCrv_ctl)[0]
# adding blendshapes
bs_upBlink = pm.blendShape(upTarget,
midTarget,
upBlink,
n="blendShapeUpBlink")
bs_lowBlink = pm.blendShape(lowTarget,
midTarget,
lowBlink,
n="blendShapeLowBlink")
bs_mid = pm.blendShape(lowTarget,
upTarget,
midTarget,
n="blendShapeLowBlink")
# setting blendshape reverse connections
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_upBlink[0].attr(midTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX", bs_upBlink[0].attr(upTarget.name()))
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_lowBlink[0].attr(midTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX",
bs_lowBlink[0].attr(lowTarget.name()))
rev_node = pm.createNode("reverse")
pm.connectAttr(bs_mid[0].attr(upTarget.name()), rev_node + ".inputX")
pm.connectAttr(rev_node + ".outputX", bs_mid[0].attr(lowTarget.name()))
# setting default values
bs_mid[0].attr(upTarget.name()).set(blinkH)
# joints root
jnt_root = primitive.addTransformFromPos(
eye_root, setName("joints"), pos=bboxCenter)
# head joint
if headJnt:
try:
headJnt = pm.PyNode(headJnt)
jnt_base = headJnt
except pm.MayaNodeError:
pm.displayWarning(
"Aborted can not find %s " % headJnt)
return
else:
# Eye root
jnt_base = jnt_root
eyeTargets_root = primitive.addTransform(eye_root,
setName("targets"))
eyeCenter_jnt = rigbits.addJnt(arrow_ctl,
jnt_base,
grp=defset,
jntName=setName("center_jnt"))
# Upper Eyelid joints ##################################################
cvs = upCrv.getCVs(space="world")
upCrv_info = node.createCurveInfoNode(upCrv)
# aim constrain targets and joints
upperEyelid_aimTargets = []
upperEyelid_jnt = []
upperEyelid_jntRoot = []
for i, cv in enumerate(cvs):
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("upEyelid_aimTarget", i),
pos=cv)
upperEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("upEyelid_jnt_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(.08)
jntRoot.attr("visibility").set(False)
upperEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("upEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("upEyelid_jnt", i))
upperEyelid_jnt.append(jnt)
# Lower Eyelid joints ##################################################
cvs = lowCrv.getCVs(space="world")
lowCrv_info = node.createCurveInfoNode(lowCrv)
# aim constrain targets and joints
lowerEyelid_aimTargets = []
lowerEyelid_jnt = []
lowerEyelid_jntRoot = []
for i, cv in enumerate(cvs):
if i in [0, len(cvs) - 1]:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("lowEyelid_aimTarget", i),
pos=cv)
lowerEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("lowEyelid_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(.08)
jntRoot.attr("visibility").set(False)
lowerEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("lowEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("lowEyelid_jnt", i))
lowerEyelid_jnt.append(jnt)
# Channels
# Adding and connecting attributes for the blink
up_ctl = upControls[2]
blink_att = attribute.addAttribute(
over_ctl, "blink", "float", 0, minValue=0, maxValue=1)
blinkMult_att = attribute.addAttribute(
over_ctl, "blinkMult", "float", 1, minValue=1, maxValue=2)
midBlinkH_att = attribute.addAttribute(
over_ctl, "blinkHeight", "float", blinkH, minValue=0, maxValue=1)
mult_node = node.createMulNode(blink_att, blinkMult_att)
pm.connectAttr(mult_node + ".outputX",
bs_upBlink[0].attr(midTarget.name()))
pm.connectAttr(mult_node + ".outputX",
bs_lowBlink[0].attr(midTarget.name()))
pm.connectAttr(midBlinkH_att, bs_mid[0].attr(upTarget.name()))
low_ctl = lowControls[2]
# Adding channels for eye tracking
upVTracking_att = attribute.addAttribute(up_ctl,
"vTracking",
"float",
.02,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
upHTracking_att = attribute.addAttribute(up_ctl,
"hTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
lowVTracking_att = attribute.addAttribute(low_ctl,
"vTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
lowHTracking_att = attribute.addAttribute(low_ctl,
"hTracking",
"float",
.01,
minValue=0,
maxValue=1,
keyable=False,
channelBox=True)
mult_node = node.createMulNode(upVTracking_att, aimTrigger_ref.attr("ty"))
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("ty"))
mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx"))
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx"))
mult_node = node.createMulNode(lowVTracking_att, aimTrigger_ref.attr("ty"))
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("ty"))
mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx"))
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx"))
# Tension on blink
node.createReverseNode(blink_att, w1.scale[0])
node.createReverseNode(blink_att, w3.scale[0])
node.createReverseNode(blink_att, w2.scale[0])
node.createReverseNode(blink_att, w4.scale[0])
###########################################
# Reparenting
###########################################
if parent:
try:
if isinstance(parent, basestring):
parent = pm.PyNode(parent)
parent.addChild(eye_root)
except pm.MayaNodeError:
pm.displayWarning("The eye rig can not be parent to: %s. Maybe "
"this object doesn't exist." % parent)
###########################################
# Auto Skinning
###########################################
if doSkin:
# eyelid vertex rows
totalLoops = rigidLoops + falloffLoops
vertexLoopList = meshNavigation.getConcentricVertexLoop(vertexList,
totalLoops)
vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList)
# we set the first value 100% for the first initial loop
skinPercList = [1.0]
# we expect to have a regular grid topology
for r in range(rigidLoops):
for rr in range(2):
skinPercList.append(1.0)
increment = 1.0 / float(falloffLoops)
# we invert to smooth out from 100 to 0
inv = 1.0 - increment
for r in range(falloffLoops):
for rr in range(2):
if inv < 0.0:
inv = 0.0
skinPercList.append(inv)
inv -= increment
# this loop add an extra 0.0 indices to avoid errors
for r in range(10):
for rr in range(2):
skinPercList.append(0.0)
# base skin
geo = pm.listRelatives(edgeLoopList[0], parent=True)[0]
# Check if the object has a skinCluster
objName = pm.listRelatives(geo, parent=True)[0]
skinCluster = skin.getSkinCluster(objName)
if not skinCluster:
skinCluster = pm.skinCluster(headJnt,
geo,
tsb=True,
nw=2,
n='skinClsEyelid')
eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt
pm.progressWindow(title='Auto skinning process',
progress=0,
max=len(eyelidJoints))
firstBoundary = False
for jnt in eyelidJoints:
pm.progressWindow(e=True, step=1, status='\nSkinning %s' % jnt)
skinCluster.addInfluence(jnt, weight=0)
v = meshNavigation.getClosestVertexFromTransform(geo, jnt)
for row in vertexRowList:
if v in row:
it = 0 # iterator
inc = 1 # increment
for i, rv in enumerate(row):
try:
perc = skinPercList[it]
t_val = [(jnt, perc), (headJnt, 1.0 - perc)]
pm.skinPercent(skinCluster,
rv,
transformValue=t_val)
if rv.isOnBoundary():
# we need to compare with the first boundary
# to check if the row have inverted direction
# and offset the value
if not firstBoundary:
firstBoundary = True
firstBoundaryValue = it
else:
if it < firstBoundaryValue:
it -= 1
elif it > firstBoundaryValue:
it += 1
inc = 2
except IndexError:
continue
it = it + inc
pm.progressWindow(e=True, endProgress=True)
# Eye Mesh skinning
skinCluster = skin.getSkinCluster(eyeMesh)
if not skinCluster:
skinCluster = pm.skinCluster(eyeCenter_jnt,
eyeMesh,
tsb=True,
nw=1,
n='skinClsEye')
def addOperators(self):
# Tangent position ---------------------------------
# common part
d = vec.getDistance(self.guide.pos["root"], self.guide.pos["neck"])
dist_node = nod.createDistNode(self.root, self.ik_ctl)
rootWorld_node = nod.createDecomposeMatrixNode(
self.root.attr("worldMatrix"))
div_node = nod.createDivNode(dist_node + ".distance",
rootWorld_node + ".outputScaleX")
div_node = nod.createDivNode(div_node + ".outputX", d)
# tan0
mul_node = nod.createMulNode(self.tan0_att,
self.tan0_loc.getAttr("ty"))
res_node = nod.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
connectAttr(res_node + ".outputX", self.tan0_loc + ".ty")
# tan1
mul_node = nod.createMulNode(self.tan1_att,
self.tan1_loc.getAttr("ty"))
res_node = nod.createMulNode(mul_node + ".outputX",
div_node + ".outputX")
connectAttr(res_node + ".outputX", self.tan1_loc.attr("ty"))
# Curves -------------------------------------------
op = aop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5, .5,
.5)
connectAttr(self.maxstretch_att, op + ".maxstretch")
connectAttr(self.maxsquash_att, op + ".maxsquash")
connectAttr(self.softness_att, op + ".softness")
# Volume driver ------------------------------------
crv_node = nod.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = aop.pathCns(self.div_cns[i], self.slv_crv, False, u, True)
cns.setAttr("frontAxis", 1) # front axis is 'Y'
cns.setAttr("upAxis", 2) # front axis is 'Z'
# Roll
aop.gear_spinePointAtOp(cns, self.root, self.ik_ctl, u, "Z")
# Squash n Stretch
op = aop.gear_squashstretch2_op(self.fk_npo[i], self.root,
arclen(self.slv_crv), "y")
connectAttr(self.volume_att, op + ".blend")
connectAttr(crv_node + ".arcLength", op + ".driver")
connectAttr(self.st_att[i], op + ".stretch")
connectAttr(self.sq_att[i], op + ".squash")
# scl compas
if i != 0:
div_node = nod.createDivNode([1, 1, 1], [
self.fk_npo[i - 1] + ".sx", self.fk_npo[i - 1] + ".sy",
self.fk_npo[i - 1] + ".sz"
])
connectAttr(div_node + ".output", self.scl_npo[i] + ".scale")
# Controlers
if i == 0:
mulmat_node = aop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.root.attr("worldInverseMatrix"))
else:
mulmat_node = aop.gear_mulmatrix_op(
self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = nod.createDecomposeMatrixNode(mulmat_node + ".output")
connectAttr(dm_node + ".outputTranslate", self.fk_npo[i].attr("t"))
connectAttr(dm_node + ".outputRotate", self.fk_npo[i].attr("r"))
#connectAttr(dm_node+".outputScale", self.fk_npo[i].attr("s"))
# Orientation Lock
if i == self.settings["division"] - 1:
dm_node = nod.createDecomposeMatrixNode(self.ik_ctl +
".worldMatrix")
blend_node = nod.createBlendNode(
[dm_node + ".outputRotate%s" % s for s in "XYZ"],
[cns + ".rotate%s" % s for s in "XYZ"], self.lock_ori_att)
self.div_cns[i].attr("rotate").disconnect()
connectAttr(blend_node + ".output",
self.div_cns[i] + ".rotate")
# Head ---------------------------------------------
self.fk_ctl[-1].addChild(self.head_cns)
def addOperators(self):
# Tangent position ---------------------------------
# common part
d = vec.getDistance(self.guide.apos[0], self.guide.apos[1])
dist_node = nod.createDistNode(self.ik0_ctl, self.ik1_ctl)
rootWorld_node = nod.createDecomposeMatrixNode(self.root.attr("worldMatrix"))
div_node = nod.createDivNode(dist_node+".distance", rootWorld_node+".outputScaleX")
div_node = nod.createDivNode(div_node+".outputX", d)
# tan0
mul_node = nod.createMulNode(self.tan0_att, self.tan0_npo.getAttr("ty"))
res_node = nod.createMulNode(mul_node+".outputX", div_node+".outputX")
pm.connectAttr( res_node+".outputX", self.tan0_npo.attr("ty"))
# tan1
mul_node = nod.createMulNode(self.tan1_att, self.tan1_npo.getAttr("ty"))
res_node = nod.createMulNode(mul_node+".outputX", div_node+".outputX")
pm.connectAttr( res_node+".outputX", self.tan1_npo.attr("ty"))
# Curves -------------------------------------------
op = aop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
pm.connectAttr(self.position_att, op+".position")
pm.connectAttr(self.maxstretch_att, op+".maxstretch")
pm.connectAttr(self.maxsquash_att, op+".maxsquash")
pm.connectAttr(self.softness_att, op+".softness")
# Volume driver ------------------------------------
crv_node = nod.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = aop.pathCns(self.div_cns[i], self.slv_crv, False, u, True)
cns.setAttr("frontAxis", 1)# front axis is 'Y'
cns.setAttr("upAxis", 0)# front axis is 'X'
# Roll
intMatrix = aop.gear_intmatrix_op(self.ik0_ctl+".worldMatrix", self.ik1_ctl+".worldMatrix", u)
dm_node = nod.createDecomposeMatrixNode(intMatrix+".output")
pm.connectAttr(dm_node+".outputRotate", self.twister[i].attr("rotate"))
pm.parentConstraint(self.twister[i], self.ref_twist[i], maintainOffset=True)
pm.connectAttr(self.ref_twist[i]+".translate", cns+".worldUpVector")
# Squash n Stretch
op = aop.gear_squashstretch2_op(self.fk_npo[i], self.root, pm.arclen(self.slv_crv), "y")
pm.connectAttr(self.volume_att, op+".blend")
pm.connectAttr(crv_node+".arcLength", op+".driver")
pm.connectAttr(self.st_att[i], op+".stretch")
pm.connectAttr(self.sq_att[i], op+".squash")
# scl compensation
if i == 0:
dm_node = nod.createDecomposeMatrixNode(self.root+".worldMatrix")
div_node = nod.createDivNode([1,1,1], [dm_node+".outputScaleX", dm_node+".outputScaleY", dm_node+".outputScaleZ"])
pm.connectAttr(div_node+".output", self.scl_npo[i]+".scale")
elif i == 1:
div_node = nod.createDivNode([1,1,1], [self.fk_npo[i-1]+".sx", self.fk_npo[i-1]+".sy", self.fk_npo[i-1]+".sz"])
pm.connectAttr(div_node+".output", self.scl_npo[i]+".scale")
else:
div_node = nod.createDivNode([1,1,1], [self.fk_npo[i-1]+".sx", self.fk_npo[i-1]+".sy", self.fk_npo[i-1]+".sz"])
pm.connectAttr(div_node+".output", self.scl_npo[i]+".scale")
# Controlers
if i == 0:
mulmat_node = aop.gear_mulmatrix_op(self.div_cns[i].attr("worldMatrix"),
self.scl_npo[0].attr("worldInverseMatrix"))
else:
mulmat_node = aop.gear_mulmatrix_op(self.div_cns[i].attr("worldMatrix"),
self.div_cns[i - 1].attr("worldInverseMatrix"))
dm_node = nod.createDecomposeMatrixNode(mulmat_node+".output")
pm.connectAttr(dm_node+".outputTranslate", self.fk_npo[i].attr("t"))
pm.connectAttr(dm_node+".outputRotate", self.fk_npo[i].attr("r"))
# Orientation Lock
if i == 0 :
dm_node = nod.createDecomposeMatrixNode(self.ik0_ctl+".worldMatrix")
blend_node = nod.createBlendNode([dm_node+".outputRotate%s"%s for s in "XYZ"], [cns+".rotate%s"%s for s in "XYZ"], self.lock_ori0_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node+".output", self.div_cns[i]+".rotate")
elif i == self.settings["division"] - 1 :
dm_node = nod.createDecomposeMatrixNode(self.ik1_ctl+".worldMatrix")
blend_node = nod.createBlendNode([dm_node+".outputRotate%s"%s for s in "XYZ"], [cns+".rotate%s"%s for s in "XYZ"], self.lock_ori1_att)
self.div_cns[i].attr("rotate").disconnect()
pm.connectAttr(blend_node+".output", self.div_cns[i]+".rotate")
# Connections (Hooks) ------------------------------
pm.pointConstraint(self.div_cns[0], self.cnx0)
pm.orientConstraint(self.div_cns[0], self.cnx0)
pm.pointConstraint(self.fk_ctl[-1], self.cnx1)
pm.orientConstraint(self.fk_ctl[-1], self.cnx1)
def addOperators(self):
# Tangent position ---------------------------------
# common part
d = vec.getDistance(self.guide.pos["root"], self.guide.pos["neck"])
dist_node = nod.createDistNode(self.root, self.ik_ctl)
rootWorld_node = nod.createDecomposeMatrixNode(self.root.attr("worldMatrix"))
div_node = nod.createDivNode(dist_node+".distance", rootWorld_node+".outputScaleX")
div_node = nod.createDivNode(div_node+".outputX", d)
# tan0
mul_node = nod.createMulNode(self.tan0_att, self.tan0_loc.getAttr("ty"))
res_node = nod.createMulNode(mul_node+".outputX", div_node+".outputX")
connectAttr( res_node+".outputX", self.tan0_loc+".ty")
# tan1
mul_node = nod.createMulNode(self.tan1_att, self.tan1_loc.getAttr("ty"))
res_node = nod.createMulNode(mul_node+".outputX", div_node+".outputX")
connectAttr( res_node+".outputX", self.tan1_loc.attr("ty"))
# Curves -------------------------------------------
op = aop.gear_curveslide2_op(self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
connectAttr(self.maxstretch_att, op+".maxstretch")
connectAttr(self.maxsquash_att, op+".maxsquash")
connectAttr(self.softness_att, op+".softness")
# Volume driver ------------------------------------
crv_node = nod.createCurveInfoNode(self.slv_crv)
# Division -----------------------------------------
for i in range(self.settings["division"]):
# References
u = i / (self.settings["division"] - 1.0)
cns = aop.pathCns(self.div_cns[i], self.slv_crv, False, u, True)
cns.setAttr("frontAxis", 1)# front axis is 'Y'
cns.setAttr("upAxis", 2)# front axis is 'Z'
# Roll
aop.gear_spinePointAtOp(cns, self.root, self.ik_ctl, u, "Z")
# Squash n Stretch
op = aop.gear_squashstretch2_op(self.fk_npo[i], self.root, arclen(self.slv_crv), "y")
connectAttr(self.volume_att, op+".blend")
connectAttr(crv_node+".arcLength", op+".driver")
connectAttr(self.st_att[i], op+".stretch")
connectAttr(self.sq_att[i], op+".squash")
# scl compas
if i != 0:
div_node = nod.createDivNode([1,1,1], [self.fk_npo[i-1]+".sx", self.fk_npo[i-1]+".sy", self.fk_npo[i-1]+".sz"])
connectAttr(div_node+".output", self.scl_npo[i]+".scale")
# Controlers
if i == 0:
mulmat_node = aop.gear_mulmatrix_op(self.div_cns[i].attr("worldMatrix"), self.root.attr("worldInverseMatrix"))
else:
mulmat_node = aop.gear_mulmatrix_op(self.div_cns[i].attr("worldMatrix"), self.div_cns[i-1].attr("worldInverseMatrix"))
dm_node = nod.createDecomposeMatrixNode(mulmat_node+".output")
connectAttr(dm_node+".outputTranslate", self.fk_npo[i].attr("t"))
connectAttr(dm_node+".outputRotate", self.fk_npo[i].attr("r"))
#connectAttr(dm_node+".outputScale", self.fk_npo[i].attr("s"))
# Orientation Lock
if i == self.settings["division"] - 1 :
dm_node = nod.createDecomposeMatrixNode(self.ik_ctl+".worldMatrix")
blend_node = nod.createBlendNode([dm_node+".outputRotate%s"%s for s in "XYZ"], [cns+".rotate%s"%s for s in "XYZ"], self.lock_ori_att)
self.div_cns[i].attr("rotate").disconnect()
connectAttr(blend_node+".output", self.div_cns[i]+".rotate")
# Head ---------------------------------------------
self.fk_ctl[-1].addChild(self.head_cns)
