class IOProfiler:
def __init__(self, server, config='release'):
self.server = server
self.client = LepDClient(self.server)
self.config = config
def get_status(self):
start_time = datetime.datetime.now()
result = self.client.getIostatResult()
if not result:
return {}
end_time = datetime.datetime.now()
raw_results = result[:]
headerline = result.pop(0)
duration = "%.1f" % ((end_time - start_time).total_seconds())
io_status = {
'lepdDuration': duration,
'disks': {},
'diskCount': 0,
'ratio': 0
}
for line in result:
if (line.strip() == ""):
continue
line_values = line.split()
device_name = line_values[0]
io_status['diskCount'] += 1
io_status['disks'][device_name] = {}
io_status['disks'][device_name]['rkbs'] = line_values[5]
io_status['disks'][device_name]['wkbs'] = line_values[6]
io_status['disks'][device_name]['ratio'] = line_values[-1]
this_disk_ratio = self.client.toDecimal(line_values[-1])
if this_disk_ratio > io_status['ratio']:
io_status['ratio'] = this_disk_ratio
end_time_2 = datetime.datetime.now()
duration = "%.1f" % ((end_time_2 - end_time).total_seconds())
io_status['lepvParsingDuration'] = duration
response_data = {'data': io_status, 'rawResult': raw_results}
return response_data
def get_capacity(self):
responseLines = self.client.getResponse("GetCmdDf")
if (len(responseLines) == 0):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = responseLines[:]
diskData = {}
for resultLine in responseLines:
if (not resultLine.startswith('/dev/')):
continue
lineValues = resultLine.split()
diskName = lineValues[0][5:]
diskData[diskName] = {}
diskData[diskName]['size'] = lineValues[1]
diskData[diskName]['used'] = lineValues[2]
diskData[diskName]['free'] = lineValues[3]
diskData['size'] = lineValues[1]
diskData['used'] = lineValues[2]
diskData['free'] = lineValues[3]
capacity = {}
capacity['diskTotal'] = diskData['size']
capacity['diskUsed'] = diskData['used']
responseData['data'] = capacity
return responseData
def get_io_top(self, ioTopLines=None):
if (ioTopLines == None):
ioTopLines = self.client.getResponse('GetCmdIotop')
ioTopResults = {}
ioTopResults['data'] = {}
ioTopResults['rawResult'] = ioTopLines[:]
# print(len(ioTopLines))
if (len(ioTopLines) < 2):
return ioTopResults
dataLineStartingIndex = 0
for line in ioTopLines:
if (re.match(
r'\W*TID\W+PRIO\W+USER\W+DISK READ\W+DISK WRITE\W+SWAPIN\W+IO\W+COMMAND\W*',
line.strip(), re.M | re.I)):
break
else:
dataLineStartingIndex += 1
while (dataLineStartingIndex >= 0):
ioTopLines.pop(0)
dataLineStartingIndex -= 1
orderIndex = 0
for line in ioTopLines:
# print (line)
if (line.strip() == ''):
continue
try:
# find the 'M/s" or 'B/s', they are for disk read and write
matches = re.findall('\s*\d+\.\d{2}\s*[G|M|B]\/s\s+', line)
diskRead = matches[0].strip()
diskWrite = matches[1].strip()
# find the "0.00 %" occurrences, they are for swapin and io
matches = re.findall('\s*\d+\.\d{2}\s*\%\s+', line)
swapin = matches[0].strip()
io = matches[1].strip()
lineValues = line.split()
pid = lineValues[0].strip()
prio = lineValues[1].strip()
user = lineValues[2].strip()
lastPercentIndex = line.rfind('%')
command = line[lastPercentIndex + 1:]
ioTopItem = {}
ioTopItem['TID'] = pid
ioTopItem['PRIO'] = prio
ioTopItem['USER'] = user
ioTopItem['READ'] = diskRead
ioTopItem['WRITE'] = diskWrite
ioTopItem['SWAPIN'] = swapin
ioTopItem['IO'] = io
ioTopItem['COMMAND'] = command
except Exception as err:
print(err)
continue
# use an incremental int as key, so we keey the order of the items.
ioTopResults['data'][orderIndex] = ioTopItem
orderIndex += 1
return ioTopResults
class CPUProfiler:
def __init__(self, server, config='release'):
self.server = server
self.client = LepDClient(self.server)
self.config = config
# this maxDataCount should match the one defined for UI.
self.maxDataCount = 25
self.loadBalanceBenchMark = Decimal(40)
def getCpuInfoForArm(self, lines):
results = {}
line = lines.pop(0)
results['architecture'] = "ARM"
results['model name'] = line.split(':')[1].strip()
results['processors'] = {}
line = lines.pop(0)
while (not line.startswith("Features")):
if (line.startswith("processor")):
processorId = line.split(":")[1].strip()
results['processors'][processorId] = {}
bogoMips = lines.pop(0).split(":")[1].strip()
results['processors'][processorId]["processorId"] = processorId
results['processors'][processorId]["bogomips"] = bogoMips
line = lines.pop(0)
return results
def getCpuInfoForArmArch64(self, lines):
results = {}
line = lines.pop(0)
results['architecture'] = "ARM"
results['model name'] = line.split(":")[1].strip()
results['processors'] = {}
line = lines.pop(0)
while (not line.startswith("Features")):
if (line.startswith("processor")):
processorId = line.split(":")[1].strip()
results['processors'][processorId] = {}
results['processors'][processorId]["processorId"] = processorId
results['processors'][processorId]["bogomips"] = ''
line = lines.pop(0)
return results
def getCpuInfoForX86(self, lines):
results = {}
results['architecture'] = "X86"
results['processors'] = {}
for line in lines:
if (line.strip() == ""):
continue
if re.match(r'processor\W+:\W+\d.*', line, re.M | re.I):
linePairs = line.split(":")
processorId = linePairs[1].strip()
results['processors'][processorId] = {}
continue
if (":" in line):
linePairs = line.split(":")
lineKey = linePairs[0].strip()
lineValue = ''
if (len(linePairs) > 1):
lineValue = linePairs[1].strip()
results['processors'][processorId][lineKey] = lineValue
return results
def getCpuInfo(self, cpuInfoLines=None):
if (cpuInfoLines == None):
cpuInfoLines = self.client.getResponse('GetProcCpuinfo')
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = cpuInfoLines
firstLine = cpuInfoLines[0]
if ("ARM" in firstLine):
responseData['data'] = self.getCpuInfoForArm(cpuInfoLines)
elif ('AArch64' in firstLine):
responseData['data'] = self.getCpuInfoForArmArch64(cpuInfoLines)
else:
secondLine = cpuInfoLines[1]
responseData['data'] = self.getCpuInfoForX86(cpuInfoLines)
if ('GenuineIntel' not in secondLine):
responseData['data']['architecture'] = 'ARM'
responseData['data']['processorCount'] = 0
for line in cpuInfoLines:
if re.match(r'\W*processor\W*:\W*\d+', line, re.M | re.I):
responseData['data']['processorCount'] += 1
return responseData
def getProcessorCount(self, cpuInfoLines=None):
if (cpuInfoLines == None):
cpuInfoLines = self.client.getResponse('GetCpuInfo')
responseData = {}
for line in cpuInfoLines:
if line.startswith('cpunr'):
responseData['count'] = int(line.split(":")[1].strip())
break
if ('count' not in responseData):
print('failed in getting processor count by GetCpuInfo')
print(cpuInfoLines)
return responseData
def getCapacity(self):
cpuInfoData = self.getCpuInfo()
if (not cpuInfoData):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = cpuInfoData['rawResult']
responseData['lepd_command'] = 'GetProcCpuinfo'
capacity = {}
capacity['processors'] = cpuInfoData['data']['processors']
coresString = 'Core'
coreCount = len(cpuInfoData['data']['processors'])
capacity['coresCount'] = coreCount
if (coreCount > 1):
coresString = "Cores"
for processorId, processorData in cpuInfoData['data'][
'processors'].items():
if (cpuInfoData['data']['architecture'] == "ARM"):
if ('model name' in cpuInfoData['data']):
processorData['model'] = cpuInfoData['data']['model name']
else:
processorData['model'] = ''
# Summary is a string to briefly describe the CPU, like "2GHZ x 2", meaning it's a 2-core cpu with 2GHZ speed.
if ('bogomips' not in processorData):
capacity['bogomips'] = ''
capacity['summary'] = ''
else:
capacity['bogomips'] = processorData['bogomips']
capacity['summary'] = processorData[
'bogomips'] + " MHz x " + str(coreCount) + coresString
capacity['model'] = processorData['model']
capacity['architecture'] = 'ARM'
else:
modelName = processorData['model name'].replace("(R)",
"").replace(
" CPU", "")
if (" @" in modelName):
modelName = modelName[0:modelName.find(" @")]
processorData['model'] = modelName
processorSpeed = Decimal(processorData['cpu MHz']).quantize(
Decimal('0'))
# Summary is a string to briefly describe the CPU, like "2GHZ x 2", meaning it's a 2-core cpu with 2GHZ speed.
capacity['summary'] = str(processorSpeed) + " MHz x " + str(
coreCount) + coresString
capacity['model'] = modelName
capacity['bogomips'] = processorData['bogomips']
capacity['architecture'] = 'X86'
break
responseData['data'] = capacity
return responseData
def get_irq(self, statData):
if len(statData) < 10:
return None
results = statData[10:len(statData)]
responseData = {}
responseData['data'] = {}
for line in results:
if (line.strip() == ''):
break
line_values = line.split()
cpu_name = line_values[1]
irq_value = 0
for index, value in enumerate(line_values):
if index < 2:
continue
irq_value = irq_value + \
self.client.toDecimal(value)
responseData['data'][cpu_name] = irq_value
# print(responseData)
return responseData
def get_soft_irq(self, statData):
if len(statData) < 14:
return None
results = statData[14:len(statData)]
responseData = {}
responseData['data'] = {}
for line in results:
if (line.strip() == ''):
break
line_values = line.split()
cpu_name = line_values[1]
responseData['data'][cpu_name] = {}
responseData['data'][cpu_name]['HRTIMER'] = self.client.toDecimal(
line_values[-2])
responseData['data'][cpu_name]['TASKLET'] = self.client.toDecimal(
line_values[-4])
responseData['data'][cpu_name]['NET_RX'] = self.client.toDecimal(
line_values[-7])
responseData['data'][cpu_name]['NET_TX'] = self.client.toDecimal(
line_values[-8])
# print(responseData)
return responseData
def getStatus(self):
statData = self.get_stat()
allIdleRatio = self.client.toDecimal(
statData['data']['cpu_stat']['all']['idle'])
componentInfo = {}
componentInfo["name"] = "cpu"
componentInfo["ratio"] = 100 - allIdleRatio
componentInfo['server'] = self.server
if (self.config == 'debug'):
componentInfo['rawResult'] = statData['rawResult']
return componentInfo
def get_stat(self):
results = self.client.getCmdMpStat()
if not results:
return None
results.pop(0)
# Basic data, basically for debugging
stat_data = {
"lepd_command": "GetCmdMpstat",
"rawResult": results,
"server": self.server
}
# this is for analysis
irq_numbers = []
softirq_numbers = []
# Core data, for displaying
stat_data['data'] = {}
stat_data['data']['cpu_stat'] = {}
for line in results:
if (line.strip() == ''):
break
line_values = line.split()
cpu_stat = {}
cpu_stat['idle'] = self.client.toDecimal(line_values[-1])
cpu_stat['gnice'] = self.client.toDecimal(line_values[-2])
cpu_stat['guest'] = self.client.toDecimal(line_values[-3])
cpu_stat['steal'] = self.client.toDecimal(line_values[-4])
cpu_stat['soft'] = self.client.toDecimal(line_values[-5])
cpu_stat['irq'] = self.client.toDecimal(line_values[-6])
cpu_stat['iowait'] = self.client.toDecimal(line_values[-7])
cpu_stat['system'] = self.client.toDecimal(line_values[-8])
cpu_stat['nice'] = self.client.toDecimal(line_values[-9])
cpu_stat['user'] = self.client.toDecimal(line_values[-10])
cpu_name = line_values[-11]
# this is for mocking data
# current_minute = datetime.now().minute
# if current_minute % 2 == 0:
# if cpu_name == '0':
# cpu_stat['irq'] = Decimal(80)
# else:
# cpu_stat['irq'] = Decimal(20)
stat_data['data']['cpu_stat'][cpu_name] = cpu_stat
# analysis for load balance
analysis_report = self.analyze_irq_for_load_balance(
stat_data['data']['cpu_stat'])
if analysis_report:
if 'messages' not in stat_data:
stat_data['messages'] = []
analysis_report['source'] = 'irq'
stat_data['messages'].append(analysis_report)
#get irq info from stat_data
irq_info = self.get_irq(results)
if (irq_info != None):
stat_data['data']['irq'] = irq_info['data']
#get soft irq info from stat_data
softirq_info = self.get_soft_irq(results)
if (softirq_info != None):
stat_data['data']['softirq'] = softirq_info['data']
return stat_data
def analyze_irq_for_load_balance(self, cpu_stat_data):
if not cpu_stat_data:
return None
if len(cpu_stat_data) < 2:
return None
irq_list = []
for core_name in cpu_stat_data:
if core_name == 'all':
continue
irq_list.append(cpu_stat_data[core_name])
# TODO: will refactor in the future, the logic below is just for demo
# a very simple logic: if any two irq values has a difference of over 30% variance, we say it's not load balanced.
for index, item in enumerate(irq_list):
if index == len(irq_list) - 1:
break
irqValue = item['irq'] + item['soft']
nextIrqValue = irq_list[index + 1]['irq'] + irq_list[index +
1]['soft']
variance = abs(irqValue - nextIrqValue)
print("variance: " + str(variance))
if variance >= self.loadBalanceBenchMark:
# if randrange(10) > 4: # this is just for mocking
print("IRQ variance=" + str(variance) +
">=0.4, load NOT balanced")
return {
'level': "warning",
"message": "Load NOT balanced! ",
"time": strftime("%Y-%m-%d %H:%M:%S", gmtime())
}
else:
print("IRQ variance less than 0.3, load balanced")
return None
def get_average_load(self, response_lines=None):
if not response_lines:
response_lines = self.client.getResponse('GetProcLoadavg')
elif isinstance(response_lines, str):
response_lines = self.client.split_to_lines(response_lines)
response_data = {}
# if options['debug']:
# response_data['rawResult'] = response_lines[:]
# response_data['lepd_command'] = 'GetProcLoadavg'
response = response_lines[0].split(" ")
# '0.00 0.01 0.05 1/103 24750
# 'avg system load of 1 minute ago, 5 minutes ago, 15 minutes ago,
# the fourth is A/B, A is the number of running processes
# B is the total process count.
# last number, like 24750 is the ID of the most recently running process.
result_data = {
'last1': self.client.toDecimal(response[0]),
'last5': self.client.toDecimal(response[1]),
'last15': self.client.toDecimal(response[2])
}
response_data['data'] = result_data
return response_data
def getTopOutput(self, responseLines=None):
if (responseLines == None):
responseLines = self.client.getResponse('GetCmdTop')
if (len(responseLines) == 0):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = responseLines[:]
headerLine = responseLines.pop(0)
while (not re.match(r'\W*PID\W+USER\W+.*', headerLine, re.M | re.I)):
headerLine = responseLines.pop(0)
headerColumns = headerLine.split()
result = {}
for lineIndex, responseLine in enumerate(responseLines):
if (self.client.LEPDENDINGSTRING in responseLine):
break
if (lineIndex > self.maxDataCount):
break
lineValues = responseLine.split()
result[lineIndex] = {}
# print(headerLine)
for columnIndex, columnName in enumerate(headerColumns):
if (columnName == 'Name' or columnName == 'CMD'):
result[lineIndex][columnName] = ' '.join(
[str(x) for x in lineValues[columnIndex:]])
else:
result[lineIndex][columnName] = lineValues[columnIndex]
responseData['data'] = {}
responseData['data']['top'] = result
responseData['data']['headerline'] = headerLine
if (re.match(r'\W*PID\W+USER\W+PR\W+.*', headerLine, re.M | re.I)):
# android :
# PID USER PR NI CPU% S #THR VSS RSS PCY Name
responseData['data']['os'] = 'android'
elif (re.match(r'\W*PID\W+USER\W+PRI\W+NI\W+VSZ\W+RSS\W+.*',
headerLine, re.M | re.I)):
# for Linux:
# PID USER PRI NI VSZ RSS S %CPU %MEM TIME CMD
responseData['data']['os'] = 'linux'
else:
print("GetCmdTop command returned data from unrecognized system")
return responseData
class CPUProfiler:
def __init__(self, server, config='release'):
self.server = server
self.client = LepDClient(self.server)
self.config = config
# this maxDataCount should match the one defined for UI.
self.maxDataCount = 25
def getCpuInfoForArm(self, lines):
results = {}
line = lines.pop(0)
results['architecture'] = "ARM"
results['model name'] = line.split(':')[1].strip()
results['processors'] = {}
line = lines.pop(0)
while(not line.startswith("Features")):
if (line.startswith("processor")):
processorId = line.split(":")[1].strip()
results['processors'][processorId] = {}
bogoMips = lines.pop(0).split(":")[1].strip()
results['processors'][processorId]["processorId"] = processorId
results['processors'][processorId]["bogomips"] = bogoMips
line = lines.pop(0)
return results
def getCpuInfoForArmArch64(self, lines):
results = {}
line = lines.pop(0)
results['architecture'] = "ARM"
results['model name'] = line.split(":")[1].strip()
results['processors'] = {}
line = lines.pop(0)
while(not line.startswith("Features")):
if (line.startswith("processor")):
processorId = line.split(":")[1].strip()
results['processors'][processorId] = {}
results['processors'][processorId]["processorId"] = processorId
results['processors'][processorId]["bogomips"] = ''
line = lines.pop(0)
return results
def getCpuInfoForX86(self, lines):
results = {}
results['architecture'] = "X86"
results['processors'] = {}
for line in lines:
if (line.strip() == ""):
continue
if re.match(r'processor\W+:\W+\d.*', line, re.M|re.I):
linePairs = line.split(":")
processorId = linePairs[1].strip()
results['processors'][processorId] = {}
continue
if (":" in line):
linePairs = line.split(":")
lineKey = linePairs[0].strip()
lineValue = ''
if (len(linePairs) > 1):
lineValue = linePairs[1].strip()
results['processors'][processorId][lineKey] = lineValue
return results
def getCpuInfo(self, cpuInfoLines = None):
if (cpuInfoLines == None):
cpuInfoLines = self.client.getResponse('GetProcCpuinfo')
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = cpuInfoLines
firstLine = cpuInfoLines[0]
if ("ARM" in firstLine):
responseData['data'] = self.getCpuInfoForArm(cpuInfoLines)
elif ('AArch64' in firstLine):
responseData['data'] = self.getCpuInfoForArmArch64(cpuInfoLines)
else:
secondLine = cpuInfoLines[1]
responseData['data'] = self.getCpuInfoForX86(cpuInfoLines)
if ('GenuineIntel' not in secondLine):
responseData['data']['architecture'] = 'ARM'
responseData['data']['processorCount'] = 0
for line in cpuInfoLines:
if re.match(r'\W*processor\W*:\W*\d+', line, re.M|re.I):
responseData['data']['processorCount'] += 1
return responseData
def getProcessorCount(self, cpuInfoLines = None):
if (cpuInfoLines == None):
cpuInfoLines = self.client.getResponse('GetCpuInfo')
responseData = {}
for line in cpuInfoLines:
if line.startswith('cpunr'):
responseData['count'] = int(line.split(":")[1].strip())
break
if ('count' not in responseData):
print('failed in getting processor count by GetCpuInfo')
print(cpuInfoLines)
return responseData
def getCapacity(self):
cpuInfoData = self.getCpuInfo()
if (not cpuInfoData):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = cpuInfoData['rawResult']
responseData['lepd_command'] = 'GetProcCpuinfo'
capacity = {}
capacity['processors'] = cpuInfoData['data']['processors']
coresString = 'Core'
coreCount = len(cpuInfoData['data']['processors'])
capacity['coresCount'] = coreCount
if (coreCount > 1):
coresString = "Cores"
for processorId, processorData in cpuInfoData['data']['processors'].items():
if (cpuInfoData['data']['architecture'] == "ARM"):
if ('model name' in cpuInfoData['data']):
processorData['model'] = cpuInfoData['data']['model name']
else:
processorData['model'] = ''
# Summary is a string to briefly describe the CPU, like "2GHZ x 2", meaning it's a 2-core cpu with 2GHZ speed.
if ('bogomips' not in processorData):
capacity['bogomips'] = ''
capacity['summary'] = ''
else:
capacity['bogomips'] = processorData['bogomips']
capacity['summary'] = processorData['bogomips'] + " MHz x " + str(coreCount) + coresString
capacity['model'] = processorData['model']
capacity['architecture'] = 'ARM'
else:
modelName = processorData['model name'].replace("(R)", "").replace(" CPU", "")
if (" @" in modelName):
modelName = modelName[0:modelName.find(" @")]
processorData['model'] = modelName
processorSpeed = Decimal(processorData['cpu MHz']).quantize(Decimal('0'))
# Summary is a string to briefly describe the CPU, like "2GHZ x 2", meaning it's a 2-core cpu with 2GHZ speed.
capacity['summary'] = str(processorSpeed) + " MHz x " + str(coreCount) + coresString
capacity['model'] = modelName
capacity['bogomips'] = processorData['bogomips']
capacity['architecture'] = 'X86'
break
responseData['data'] = capacity
return responseData
def getStatus(self):
statData = self.get_stat()
allIdleRatio = self.client.toDecimal(statData['data']['all']['idle'])
componentInfo = {}
componentInfo["name"] = "cpu"
componentInfo["ratio"] = 100 - allIdleRatio
componentInfo['server'] = self.server
if (self.config == 'debug'):
componentInfo['rawResult'] = statData['rawResult']
return componentInfo
def get_stat(self):
results = self.client.getCmdMpStat()
if not results:
return None
results.pop(0)
# Basic data, basically for debugging
stat_data = {
"lepd_command": "GetCmdMpstat",
"rawResult": results,
"server": self.server
}
# Core data, for displaying
stat_data['data'] = {}
for line in results:
if (line.strip() == ''):
break
line_values = line.split()
cpu_stat = {}
cpu_stat['idle'] = self.client.toDecimal(line_values[-1])
cpu_stat['gnice'] = self.client.toDecimal(line_values[-2])
cpu_stat['guest'] = self.client.toDecimal(line_values[-3])
cpu_stat['steal'] = self.client.toDecimal(line_values[-4])
cpu_stat['soft'] = self.client.toDecimal(line_values[-5])
cpu_stat['irq'] = self.client.toDecimal(line_values[-6])
cpu_stat['iowait'] = self.client.toDecimal(line_values[-7])
cpu_stat['system'] = self.client.toDecimal(line_values[-8])
cpu_stat['nice'] = self.client.toDecimal(line_values[-9])
cpu_stat['user'] = self.client.toDecimal(line_values[-10])
cpu_name = line_values[-11]
stat_data['data'][cpu_name] = cpu_stat
# Analysis data, for notification and alert
stat_data['message'] = {}
for cpu_name in stat_data['data']:
if cpu_name == 'all':
continue
stat_data['message'][cpu_name] = {
'error': '',
'warning': 'Load NOT balanced!',
'info': ''
}
return stat_data
def getAverageLoad(self, options=None):
responseLines = self.client.getResponse('GetProcLoadavg')
responseData = {}
if (options and options.debug == True):
responseData['rawResult'] = responseLines[:]
responseData['lepd_command'] = 'GetProcLoadavg'
response = responseLines[0].split(" ")
# '0.00 0.01 0.05 1/103 24750
# 'avg system load of 1 minute ago, 5 minutes ago, 15 minutes ago,
# the fourth is A/B, A is the number of running processes
# B is the total process count.
# last number, like 24750 is the ID of the most recently running process.
resultData = {}
resultData['last1'] = self.client.toDecimal(response[0])
resultData['last5'] = self.client.toDecimal(response[1])
resultData['last15'] = self.client.toDecimal(response[2])
responseData['data'] = resultData
return responseData
def getTopOutput(self, responseLines = None):
if (responseLines == None):
responseLines = self.client.getResponse('GetCmdTop')
if (len(responseLines) == 0):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = responseLines[:]
headerLine = responseLines.pop(0)
while ( not re.match(r'\W*PID\W+USER\W+.*', headerLine, re.M|re.I) ):
headerLine = responseLines.pop(0)
headerColumns = headerLine.split()
result = {}
for lineIndex, responseLine in enumerate(responseLines):
if (self.client.LEPDENDINGSTRING in responseLine):
break
if (lineIndex > self.maxDataCount):
break
lineValues = responseLine.split()
result[lineIndex] = {}
# print(headerLine)
for columnIndex, columnName in enumerate(headerColumns):
if (columnName == 'Name' or columnName == 'CMD'):
result[lineIndex][columnName] = ' '.join([str(x) for x in lineValues[columnIndex:]])
else:
result[lineIndex][columnName] = lineValues[columnIndex]
responseData['data'] = {}
responseData['data']['top'] = result
responseData['data']['headerline'] = headerLine
if (re.match(r'\W*PID\W+USER\W+PR\W+.*', headerLine, re.M|re.I)):
# android :
# PID USER PR NI CPU% S #THR VSS RSS PCY Name
responseData['data']['os'] = 'android'
elif (re.match(r'\W*PID\W+USER\W+PRI\W+NI\W+VSZ\W+RSS\W+.*', headerLine, re.M|re.I)):
# for Linux:
# PID USER PRI NI VSZ RSS S %CPU %MEM TIME CMD
responseData['data']['os'] = 'linux'
else:
print("GetCmdTop command returned data from unrecognized system")
return responseData
class MemoryProfiler:
def __init__(self, server, config='release'):
self.server = server
self.client = LepDClient(self.server)
self.config = config
self.dataCount = 25
def convertKbToMb(self, strKbValue):
return Decimal(int(strKbValue) / 1024).quantize(Decimal('0'))
def getStatus(self):
response = self.client.getResponse("GetProcMeminfo")
if (response == None or len(response) == 0):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = response[:]
results = {}
for line in response:
linePairs = line.split(":")
lineKey = linePairs[0].strip()
lineValue = linePairs[1].replace('kB', '').strip()
results[lineKey] = lineValue
componentInfo = {}
componentInfo["name"] = "memory"
componentInfo['total'] = self.client.toDecimal(
Decimal(int(results['MemTotal']) / 1024).quantize(Decimal('0')))
componentInfo['free'] = self.client.toDecimal(
Decimal(int(results['MemFree']) / 1024).quantize(Decimal('0')))
componentInfo['buffers'] = self.client.toDecimal(
Decimal(int(results['Buffers']) / 1024).quantize(Decimal('0')))
componentInfo['cached'] = self.client.toDecimal(
Decimal(int(results['Cached']) / 1024).quantize(Decimal('0')))
componentInfo['used'] = componentInfo['total'] - componentInfo[
'free'] - componentInfo['buffers'] - componentInfo['cached']
usedRatio = (componentInfo['used'] / componentInfo['total']) * 100
#usedRatio = Decimal(usedRatio).quantize(Decimal('0.00'))
usedRatio = ("%.2f" % usedRatio)
componentInfo["ratio"] = usedRatio
componentInfo['unit'] = 'MB'
responseData['data'] = componentInfo
return responseData
def getCapacity(self, sampleDataLines=None):
responseLines = []
if (sampleDataLines == None):
responseLines = self.client.getResponse("GetProcMeminfo")
else:
responseLines = sampleDataLines
if (len(responseLines) == 0):
return {}
responseData = {}
if (self.config == 'debug'):
responseData['rawResult'] = responseLines[:]
results = {}
for line in responseLines:
# print(line)
if (self.client.LEPDENDINGSTRING in line):
continue
linePairs = line.split(":")
lineKey = linePairs[0].strip()
lineValue = linePairs[1].replace('kB', '').strip()
results[lineKey] = lineValue
componentInfo = {}
componentInfo["name"] = "memory"
componentInfo["capacity"] = int(int(results['MemTotal']) / 1024)
componentInfo["unit"] = "MB"
componentInfo["summary"] = str(
componentInfo["capacity"]) + " " + componentInfo["unit"]
responseData['data'] = componentInfo
return responseData
def normalizeValue(self, valueString):
# 1.23% -> 0.012
if (valueString.endswith("%")):
valueString = valueString.replace("%", "")
valueString = Decimal(Decimal(valueString) / 100).quantize(
Decimal('0.0000'))
elif (valueString == "N/A"):
valueString = 0
return valueString
# def getMemoryStat(self):
#
# memoryStatData = {}
#
# results = self.client.getResponse('GetCmdSmem')
# if (self.config == 'debug'):
# memoryStatData['rawResult'] = results[:]
#
# headerLine = results.pop(0)
# headers = headerLine.split()
#
# # sMemInfo['headerLine'] = headerLine
# for line in results:
# # print(line)
# lineValues = line.split()
#
# pid = lineValues[0]
# memoryStatData[pid] = {}
# # sMemInfo['line'] = line
# memoryStatData[pid]['pid'] = lineValues.pop(0)
# memoryStatData[pid]['user'] = lineValues.pop(0)
#
# # the command section is likely to have whitespaces in it thus hard to locate it. workaround here.
# memoryStatData[pid]['rss'] = self.normalizeValue(lineValues.pop())
# memoryStatData[pid]['pss'] = self.normalizeValue(lineValues.pop())
# memoryStatData[pid]['uss'] = self.normalizeValue(lineValues.pop())
# memoryStatData[pid]['swap'] = self.normalizeValue(lineValues.pop())
#
# memoryStatData[pid]['command'] = ' '.join([str(x) for x in lineValues])
#
# if(len(memoryStatData) >= self.dataCount):
# break
#
# return
def getProcrank(self):
procrankData = {}
resultLines = self.client.getResponse('GetCmdProcrank')
if (len(resultLines) == 0):
return {}
if (self.config == 'debug'):
procrankData['rawResult'] = resultLines[:]
procrankData['data'] = {}
procrankData['data']['procranks'] = {}
headerLine = resultLines.pop(0)
lineIndex = 0
for line in resultLines:
if (re.match(r'\W+-+\W+-+\W-+.*', line, re.M | re.I)):
break
lineValues = line.split()
procrankData['data']['procranks'][lineIndex] = {}
procrankData['data']['procranks'][lineIndex][
'pid'] = lineValues.pop(0)
procrankData['data']['procranks'][lineIndex][
'vss'] = self.client.toDecimal(
Decimal(Decimal(lineValues.pop(0)[:-1])))
procrankData['data']['procranks'][lineIndex][
'rss'] = self.client.toDecimal(
Decimal(Decimal(lineValues.pop(0)[:-1])))
procrankData['data']['procranks'][lineIndex][
'pss'] = self.client.toDecimal(
Decimal(Decimal(lineValues.pop(0)[:-1])))
procrankData['data']['procranks'][lineIndex][
'uss'] = self.client.toDecimal(
Decimal(Decimal(lineValues.pop(0)[:-1])))
procrankData['data']['procranks'][lineIndex]['cmdline'] = ' '.join(
[str(x) for x in lineValues])
lineIndex += 1
if (len(procrankData) >= self.dataCount):
break
# now parse from end, which contains summary info
lastLine = resultLines[-1]
procrankData['data']['sum'] = {}
if (lastLine.startswith('RAM:')):
lastLine = lastLine.replace("RAM:", '')
lastLineValuePairs = lastLine.split(", ")
for valuePair in lastLineValuePairs:
keyValuePair = valuePair.split()
keyName = keyValuePair[1].strip()
keyValue = keyValuePair[0].strip()
procrankData['data']['sum'][keyName + "Unit"] = keyValue[-1:]
procrankData['data']['sum'][keyName] = self.client.toDecimal(
Decimal(Decimal(keyValue[:-1])))
xssSumLine = resultLines[-3].strip()
if (xssSumLine.endswith('TOTAL')):
xssValues = xssSumLine.split()
ussTotalString = xssValues[-2]
procrankData['data']['sum']['ussTotalUnit'] = ussTotalString[-1:]
procrankData['data']['sum']['ussTotal'] = self.client.toDecimal(
Decimal(Decimal(ussTotalString[:-1])))
pssTotalString = xssValues[-3]
procrankData['data']['sum']['pssTotalUnit'] = pssTotalString[-1:]
procrankData['data']['sum']['pssTotal'] = self.client.toDecimal(
Decimal(Decimal(pssTotalString[:-1])))
return procrankData