def linkFiles(paths, pD):
paramFile1 = "par_all27_prot_lipid.prm"
paramFile2 = "par_all35_ethers.inp"
print("################################################################\n" \
+ "Moving additional configuration files into " + paths['run'] + ".\n" \
+ "################################################################\n")
# Make a link to the parameter file(s) in the simulation run folder.
if not os.path.exists(paths['run'] + paramFile1):
os.link(paths['param'] + paramFile1, paths['run'] + paramFile1)
if not os.path.exists(paths['run'] + paramFile2):
os.link(paths['param'] + paramFile2, paths['run'] + paramFile2)
# Make links to the pdb and psf files for the run.
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.pdb'):
os.link(my.configFile(paths['polymer'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.psf'):
os.link(my.configFile(paths['polymer'], pD['Config File Name'] + '.psf'), paths['run'] + pD['Config File Name'] + '.psf')
# Make a link to the restraint file for the run.
if not os.path.exists(paths['run'] + pD['Config File Name'] + '-restraint.pdb'):
os.link(my.configFile(paths['restraint'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '-restraint.pdb')
# Make a link to the input coordinate files for the run.
if pD['Run Type'] == 'New':
if not os.path.exists(paths['run'] + pD['Config File Name'] + ".restart.coor"):
os.link(paths['minimization'] + pD['Data File Name'] + ".restart.coor", paths['run'] + pD['Config File Name'] + ".restart.coor")
def pdbWrite(paths, fileName, name, value):
if os.path.isfile(my.configFile(paths[name], fileName + '.pdb')):
print("################################################################\n" \
+ "Configuration files already exist in:\n" + my.config(paths[name]) + ".\n" \
+ "################################################################\n")
return
print("################################################################\n" \
+ "Writing configuration file in:\n" + my.config(paths[name]) + ".\n" \
+ "################################################################\n")
if not os.path.exists(my.config(paths[name])):
os.makedirs(my.config(paths[name]))
# Opening a pipe to VMD in the shell
logFile = open(my.config(paths[name]) + fileName + ".log", "w")
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools 1.0\n"
tclName = "NT" + name + " " + my.quoted(my.config(paths['solvate']) + fileName) + " " \
+ my.quoted(my.config(paths[name]) + fileName) + " " + str(value) + "\n"
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(tclName)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
def pdbWrite(paths, fileName, name, value):
if os.path.isfile(my.configFile(paths[name], fileName + '.pdb')):
print("################################################################\n" \
+ "Configuration files already exist in:\n" + my.config(paths[name]) + ".\n" \
+ "################################################################\n")
return
print("################################################################\n" \
+ "Writing configuration file in:\n" + my.config(paths[name]) + ".\n" \
+ "################################################################\n")
if not os.path.exists(my.config(paths[name])):
os.makedirs(my.config(paths[name]))
# Opening a pipe to VMD in the shell
logFile = open(my.config(paths[name]) + fileName + ".log", "w")
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools 1.0\n"
tclName = "NT" + name + " " + my.quoted(my.config(paths['solvate']) + fileName) + " " \
+ my.quoted(my.config(paths[name]) + fileName) + " " + str(value) + "\n"
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(tclName)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
def linkFiles(paths, pD):
paramFile1 = "par_all27_prot_lipid.prm"
paramFile2 = "par_all35_ethers.inp"
print("################################################################\n" \
+ "Moving additional configuration files into " + paths['run'] + ".\n" \
+ "################################################################\n")
# Make a link to the parameter file(s) in the simulation run folder.
if not os.path.exists(paths['run'] + paramFile1):
os.link(paths['param'] + paramFile1, paths['run'] + paramFile1)
if not os.path.exists(paths['run'] + paramFile2):
os.link(paths['param'] + paramFile2, paths['run'] + paramFile2)
# Make links to the pdb and psf files for the run.
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.pdb'):
os.link(
my.configFile(paths['polymer'], pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.psf'):
os.link(
my.configFile(paths['polymer'], pD['Config File Name'] + '.psf'),
paths['run'] + pD['Config File Name'] + '.psf')
# Make a link to the restraint file for the run.
if not os.path.exists(paths['run'] + pD['Config File Name'] +
'-restraint.pdb'):
os.link(
my.configFile(paths['restraint'], pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '-restraint.pdb')
# Make a link to the input coordinate files for the run.
if pD['Run Type'] == 'New':
if not os.path.exists(paths['run'] + pD['Config File Name'] +
".restart.coor"):
os.link(
paths['minimization'] + pD['Data File Name'] + ".restart.coor",
paths['run'] + pD['Config File Name'] + ".restart.coor")
def linkFiles(paths, pD, wisdomFile, preheat = False):
paramFile = "par_all27_prot_lipid.prm"
print("################################################################\n" \
+ "Moving additional configuration files into " + paths['run'] + ".\n" \
+ "################################################################\n")
# Make a link to the parameter file in the simulation run folder
if not os.path.exists(paths['run'] + paramFile):
os.link(paths['param'] + paramFile, paths['run'] + paramFile)
# Make a link to the wisdom file in the simulation run folder
if (not os.path.exists(paths['run'] + wisdomFile)) \
and os.path.exists(paths['param'] + wisdomFile):
os.link(paths['param'] + wisdomFile, paths['run'] + wisdomFile)
# Make links to all the other configuration files in the simulation run folder
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.pdb'):
os.link(my.configFile(paths['solvate'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.psf'):
os.link(my.configFile(paths['solvate'], pD['Config File Name'] + '.psf'), paths['run'] + pD['Config File Name'] + '.psf')
if not os.path.exists(paths['run'] + pD['Config File Name'] + '-restraint.pdb'):
os.link(my.configFile(paths['restraint'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '-restraint.pdb')
if pD['Run Type'] == 'New':
if not os.path.exists(paths['run'] + pD['Config File Name'] + '-langevin.pdb') and pD['Restraint'] != 0:
os.link(my.configFile(paths['temperature'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '-langevin.pdb')
if not preheat:
if not os.path.exists(paths['run'] + pD['Config File Name'] + '-forcing.pdb'):
os.link(my.configFile(paths['forcing'], pD['Config File Name'] + '.pdb'), paths['run'] + pD['Config File Name'] + '-forcing.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] + ".restart.coor"):
os.link(paths['run'] + "Preheat/" + pD['Data File Name'] + ".restart.coor", paths['run'] + pD['Config File Name'] + ".restart.coor")
if not os.path.exists(paths['run'] + pD['Config File Name'] + ".restart.vel"):
os.link(paths['run'] + "Preheat/" + pD['Data File Name'] + ".restart.vel", paths['run'] + pD['Config File Name'] + ".restart.vel")
else:
if not os.path.exists(paths['run'] + pD['Config File Name'] + ".restart.coor"):
os.link(paths['minimization'] + pD['Data File Name'] + ".restart.coor", paths['run'] + pD['Config File Name'] + ".restart.coor")
def makeConfigFiles(paths, pD):
""" makeConfigFiles makes all the pdb and psf files necessary for the current
simulation. It makes heavy use of the pdbWrite procedure in myutil.py. It
does this by constructing a list of commands to be fed to VMD for each of
pdb and/or psf files that need to be created."""
# This is the base name for all the various pdb and psf files we will generate.
fileName = pD['Config File Name']
# Create the desired nanotube. The files will be stored in the 'Config Files' folder
# in the folder pointed to by paths['L'].
package = "package require CNTtools 1.0\n"
commands = [ "genNT " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ str(pD['L']/10) + " " + str(pD['n']) + " " + str(pD['m']) + "\n" ]
commands.append("centerNT " +
my.quoted(my.configFile(paths['L'], fileName)))
my.pdbWrite(paths['L'], fileName, package, commands)
# Join the nanotube to the polymer in single pdb and psf files. The files will be
# stored in the 'Config Files' folder in the folder pointed to by paths['polymer'].
package = "package require CNTPoly 1.0\n"
commands = [ "joinMolecules " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ my.quoted(paths['pdb'] + pD['Polymer PSF']) + " " \
+ my.quoted(paths['pdb'] + pD['Polymer PDB']) + " " \
+ my.quoted(my.configFile(paths['polymer'], fileName)) + "\n" ]
my.pdbWrite(paths['polymer'], fileName, package, commands)
# Write out the pdb file with the restraint information for the nanotube. The
# resulting pdb file will be written in the folder pointed to by paths['restraint'].
package = "package require CNTtools 1.0\n"
commands = [ "NTrestraint " \
+ my.quoted(my.configFile(paths['polymer'], fileName)) + " " \
+ my.quoted(my.configFile(paths['restraint'], fileName)) + " " \
+ str(pD['Restraint']) + "\n" ]
my.pdbWrite(paths['restraint'], pD['Config File Name'], package, commands)
def makeConfigFiles(paths, pD):
""" makeConfigFiles makes all the pdb and psf files necessary for the current
simulation. It makes heavy use of the pdbWrite procedure in myutil.py. It
does this by constructing a list of commands to be fed to VMD for each of
pdb and/or psf files that need to be created."""
# This is the base name for all the various pdb and psf files we will generate.
fileName = pD['Config File Name']
# Create the desired nanotube. The files will be stored in the 'Config Files' folder
# in the folder pointed to by paths['L'].
package = "package require CNTtools 1.0\n"
commands = [ "genNT " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ str(pD['L']/10) + " " + str(pD['n']) + " " + str(pD['m']) + "\n" ]
commands.append("centerNT " + my.quoted(my.configFile(paths['L'], fileName)))
my.pdbWrite(paths['L'], fileName, package, commands)
# Join the nanotube to the polymer in single pdb and psf files. The files will be
# stored in the 'Config Files' folder in the folder pointed to by paths['polymer'].
package = "package require CNTPoly 1.0\n"
commands = [ "joinMolecules " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ my.quoted(my.configFile(paths['L'], fileName)) + " " \
+ my.quoted(paths['pdb'] + pD['Polymer PSF']) + " " \
+ my.quoted(paths['pdb'] + pD['Polymer PDB']) + " " \
+ my.quoted(my.configFile(paths['polymer'], fileName)) + "\n" ]
my.pdbWrite(paths['polymer'], fileName, package, commands)
# Write out the pdb file with the restraint information for the nanotube. The
# resulting pdb file will be written in the folder pointed to by paths['restraint'].
package = "package require CNTtools 1.0\n"
commands = [ "NTrestraint " \
+ my.quoted(my.configFile(paths['polymer'], fileName)) + " " \
+ my.quoted(my.configFile(paths['restraint'], fileName)) + " " \
+ str(pD['Restraint']) + "\n" ]
my.pdbWrite(paths['restraint'], pD['Config File Name'], package, commands)
def waterWrite(paths, fileName, N0, S):
""" waterWrite adds N0 + S water molecules to the inside of the nanotube,
then write out new psf and pdb files for the nanotube. """
if not my.needConfigFiles(paths['solvate'], fileName):
return
# Opens input nanotube psf and pdb files, and reads all the lines of each file into lists
with open(my.configFile(paths['pbc'], fileName + '.psf')) as psfFile:
psfLines = psfFile.readlines()
with open(my.configFile(paths['pbc'], fileName + '.pdb')) as pdbFile:
pdbLines = pdbFile.readlines()
# Grabs the lengths of each of the lists
lenPsf = len(psfLines)
lenPdb = len(pdbLines)
# String formats for the PSF and PDB file writing
# PDB
dampingCoeff = 0.00
oxygen = "ATOM{0:>7} OH2 TIP3 {1:4.0f} 0.000 0.000{2:>8.3f} 0.00 0.00 WTR O\n"
hydro1 = "ATOM{0:>7} H1 TIP3 {1:4.0f} 0.000 0.766{2:>8.3f} 0.00 0.00 WTR H\n"
hydro2 = "ATOM{0:>7} H2 TIP3 {1:4.0f} 0.000 -0.766{2:>8.3f} 0.00 0.00 WTR H\n"
# Psf
opsf = " {0:>5} WTR {1:<4} TIP3 OH2 OT -0.834000 15.9994 0\n"
h1psf = " {0:>5} WTR {1:<4} TIP3 H1 HT 0.417000 1.0080 0\n"
h2psf = " {0:>5} WTR {1:<4} TIP3 H2 HT 0.417000 1.0080 0\n"
# String format for the bonds and angles in the psf file
sBondFormat = " {0: >8}{1: >8}{2: >8}{3: >8}{4: >8}{5: >8}{6: >8}{7: >8}\n"
sAngleFormat = " {0: >8}{1: >8}{2: >8}{3: >8}{4: >8}{5: >8}{6: >8}{7: >8}{8: >8}\n"
# Initializing lists used below
atoms = []
bonds = []
angles = []
preAtoms = []
postAngles = []
intBonds = []
bondsFinal = []
intAngles = []
anglesFinal = []
# Finds the original number of atoms in the Pdb file
nAtoms = lenPdb-2
# Calculates the new number of atoms after solvating
newAtoms = nAtoms + (3*(N0+S))
# Calculates the new number of bonds and angles after solvating
newBonds = int(nAtoms*(3./2)) + 2*(N0+S)
newAngles = nAtoms*3 + (N0+S)
# Iterates through all of the lines of the input Psf file, and records the
# index of the lines that contain the string !NATOM, !NBOND, and !NTHETA,
# as well as changes the line to update the new number of each
for i in range(0, lenPsf):
if "!NATOM" in psfLines[i]:
psfLines[i] = " {:3d} !NATOM\n".format( newAtoms )
atomIndex = i
elif "!NBOND" in psfLines[i]:
psfLines[i] = " {:3d} !NBOND: bonds\n".format( newBonds )
bondIndex = i
elif "!NTHETA" in psfLines[i]:
psfLines[i] = " {:3d} !NTHETA: angles\n".format( newAngles )
angleIndex = i
# Stores all of the original text lines that come before the atom section into a list
for i in range(0, atomIndex):
preAtoms.append(psfLines[i])
# Stores the atoms into a list
count = 1
while psfLines[atomIndex+count].strip():
atoms.append( psfLines[atomIndex+count] )
count+=1
# Stores the bonds into a list
count = 1
while psfLines[bondIndex+count].strip():
bonds.append( psfLines[bondIndex+count] )
count+=1
# Stores the angles into a list
count = 1
while psfLines[angleIndex+count].strip():
angles.append( psfLines[angleIndex+count] )
count+=1
# Stores all the text lines after the angles into a list
for i in range(angleIndex+count, lenPsf):
postAngles.append(psfLines[i])
# Takes the bonds and angles in the original file and splits each line into individual numbers
for bond in bonds:
intBonds.append( bond.strip("\n").split() )
for angle in angles:
intAngles.append( angle.strip("\n").split() )
# Compresses the list of lists into a single list of all of the angles and bonds in the original file
intBonds = list(chain.from_iterable(intBonds))
intAngles = list(chain.from_iterable(intAngles))
# Adds the new atoms to the original list of atoms
for i in range(nAtoms+1, (3*(N0+S)) + nAtoms+1, 3):
atoms.append(opsf.format(i, int((i-nAtoms)/3)+2))
atoms.append(h1psf.format(i+1, int((i-nAtoms)/3)+2))
atoms.append(h2psf.format(i+2, int((i-nAtoms)/3)+2))
intAngles.append(str(i+1))
intAngles.append(str(i))
intAngles.append(str(i+2))
intBonds.append(str(i))
intBonds.append(str(i+1))
intBonds.append(str(i))
intBonds.append(str(i+2))
# Formats the list of bonds into the psf format with 8 columns
for i in range(0,len(intBonds),8):
try:
bondsFinal.append( sBondFormat.format(intBonds[i], intBonds[i+1],
intBonds[i+2], intBonds[i+3], intBonds[i+4], intBonds[i+5],
intBonds[i+6], intBonds[i+7]) )
except:
diff = len(intBonds) - i
tempStr = ""
for j in range(i, i+diff):
tempStr = tempStr + "{:>8}".format(intBonds[j])
bondsFinal.append( " " + tempStr + "\n" )
# Formates the list of angles into the psf format with 9 columns
for i in range(0, len(intAngles), 9):
try:
anglesFinal.append( sAngleFormat.format(intAngles[i], intAngles[i+1],
intAngles[i+2], intAngles[i+3], intAngles[i+4], intAngles[i+5],
intAngles[i+6], intAngles[i+7], intAngles[i+8]) )
except:
diff = len(intAngles) - i
tempStr = ""
for j in range(i, i+diff):
tempStr = tempStr + "{:>8}".format(intAngles[j])
anglesFinal.append( " " + tempStr + "\n" )
oxZ = waterZ(N0, S)
for i in range(0, N0+S):
hyZ = oxZ[i] + 0.570
if i == 0:
pdbLines[lenPdb-1] = oxygen.format(nAtoms+1, 2, oxZ[i])
pdbLines.append( hydro1.format(nAtoms+2, 2, hyZ) )
pdbLines.append( hydro2.format(nAtoms+3, 2, hyZ) )
else:
pdbLines.append( oxygen.format(nAtoms + 3*i+1, i+2, oxZ[i]) )
pdbLines.append( hydro1.format(nAtoms + (3*i+2), i+2, hyZ) )
pdbLines.append( hydro2.format(nAtoms + (3*i+3), i+2, hyZ) )
# Writes the new pdb lines to a new pdb file
pdbLines.append("END\n")
pdbOut = open(my.configFile(paths['solvate'], fileName + '-temp.pdb'), 'w')
pdbOut.writelines(pdbLines)
pdbOut.close()
# Writes the new psf lines to a new psf file
psfOut = open(my.configFile(paths['solvate'], fileName + '-temp.psf'), 'w')
psfOut.writelines(preAtoms)
psfOut.writelines(psfLines[atomIndex])
psfOut.writelines(atoms)
psfOut.writelines("\n" + psfLines[bondIndex])
psfOut.writelines(bondsFinal)
psfOut.writelines("\n" + psfLines[angleIndex])
psfOut.writelines(anglesFinal)
psfOut.writelines(postAngles)
psfOut.close()
print("################################################################\n" \
+ "Post-processing the CNT and rewriting configuration files.\n" \
+ "################################################################\n")
package = "package require CNTtools 1.0\n"
commands = [ "centerNT " + my.quoted(my.configFile(paths['solvate'], fileName)) + "\n" ]
my.pdbWrite(my.config(paths['solvate']), fileName, package, commands)
# Delete the now-uneeded -temp pdb and psf files.
os.remove(my.config(paths['solvate']) + fileName + "-temp.pdb")
os.remove(my.config(paths['solvate']) + fileName + "-temp.psf")
def cntWrite(paths, fileName, N0, n, m):
""" cntWrite creates a periodic nanotube with the following input parameters:
fileName is the name of the initial nanotube with number of rings N0 and
dimensions n x m."""
# Bonds lengths of different armchair nanotubes in nanometers
s0 = 0.1418
# calculates the length of the nanotube based on bond lengths
l = float(N0-0.75) * s0 * np.sqrt(3)
if os.path.isfile(my.configFile(paths['pbc'], fileName + '.psf')) \
and os.path.isfile(my.configFile(paths['pbc'], fileName + '.pdb')):
print("################################################################\n" \
+ "Configuration files already exist in:\n" + my.config(paths['pbc']) + ".\n" \
+ "################################################################\n")
return
print("################################################################\n" \
+ "Running VMD to generate nanotube configuration files.\n" \
+ "################################################################\n")
if not os.path.exists(my.config(paths['N0'])):
os.makedirs(my.config(paths['N0']))
if not os.path.exists(my.config(paths['pbc'])):
os.makedirs(my.config(paths['pbc']))
# Create the nanotube in VMD
logFile = open(my.config(paths['N0']) + fileName + ".log", "w")
# Opening a pipe to VMD in the shell
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools 1.0\n"
genNT = "genNT " + my.quoted(fileName) + " " + my.quoted(my.config(paths['N0'])) + " " \
+ str(l) + " " + str(n) + " " + str(m) + "\n"
# run commands through pipe and saves to file
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(genNT)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
# Make the nanotube periodic in VMD
logFile = open(my.config(paths['pbc']) + fileName + ".log", "w")
# Opening a pipe to VMD in the shell
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools\n"
pbcNT = "pbcNT " + my.quoted(my.config(paths['N0']) + fileName) + " " \
+ my.quoted(my.config(paths['pbc']) + fileName) + " default\n"
# run commands through pipe and saves to file
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(pbcNT)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
# Delete the now-uneeded -prebond pdb and psf files
os.remove(my.config(paths['pbc']) + fileName + "-prebond.pdb")
os.remove(my.config(paths['pbc']) + fileName + "-prebond.psf")
# Read back in the pdb file and make sure the z-coordinate spacing is regular
alignCNT(my.config(paths['pbc']) + fileName + ".pdb")
def run(pD):
""" This is the main entry point for performing simulations with a carbon nanotube
and water. It takes a python dictionary of simulation parameters as its
argument. Before calling run, you must call myutil.setWaterParamDefaults()
to create the dictionary."""
# The paths dictionary holds the path name to each tier of the data hierarchy.
paths = my.makeWaterPaths(pD)
# Find the hostname and set the name of the wisdom file used by PME.
hostname = socket.gethostname().partition('.')[0]
wisdomFile = "FFTW_NAMD_2.11_" + hostname + ".txt"
# If we're doing a production run (not a minimization) on nanotube, we want to
# use the GPU, so we run the CUDA version of namd2. The CUDA version of namd seems
# to give errors occasionally when minimizing, so we don't use it for that.
if pD['Run Type'] == 'Minimize':
executable = 'namd2'
else:
if hostname == 'nanotube':
executable = 'namd2-cuda'
else:
executable = 'namd2'
# If the data folder for the simulation already exists, abort, under the assumption
# that this is an accidental duplicate of an earlier run. New runs should go into
# their own folders.
if os.path.exists(paths['data']):
print("################################################################\n" \
+ "Data folder for " + pD['Run Type'] + " run already exists ... aborting.\n" \
+ "################################################################\n")
return
# This is the base name for all the various pdb and psf files we will generate.
fileName = pD['Config File Name']
# Bonds lengths of armchair nanotubes in nanometers. From this we'll calculate the
# actual length of the nanotube in nanometers to feed to VMD.
s0 = 0.1418
l = float(pD['N0']-0.75) * s0 * np.sqrt(3)
# Create the desired nanotube. The files will be stored in the 'Config Files' folder
# in the folder pointed to by paths['N0'].
package = "package require CNTtools 1.0\n"
commands = [ "genNT " \
+ my.quoted(my.configFile(paths['N0'], fileName)) + " " \
+ str(l) + " " + str(pD['n']) + " " + str(pD['m']) + "\n" ]
my.pdbWrite(paths['N0'], fileName, package, commands)
# Now we'll make the nanotube periodic in the z direction.
commands = [ "pbcNT " + my.quoted(my.configFile(paths['N0'], fileName)) + " " \
+ my.quoted(my.configFile(paths['pbc'], fileName)) + " default\n" ]
my.pdbWrite(paths['pbc'], fileName, package, commands)
# Delete the now-uneeded -prebond pdb and psf files.
if os.path.exists(my.config(paths['pbc']) + fileName + "-prebond.pdb"):
os.remove(my.config(paths['pbc']) + fileName + "-prebond.pdb")
if os.path.exists(my.config(paths['pbc']) + fileName + "-prebond.psf"):
os.remove(my.config(paths['pbc']) + fileName + "-prebond.psf")
# Read back in the pdb file and make sure the z-coordinate spacing is regular.
alignCNT(my.config(paths['pbc']) + fileName + ".pdb")
# cntWrite(paths, pD['Config File Name'], pD['N0'], pD['n'], pD['m'])
# Add the water to the carbon nanotube, and center the nanotube in the box.
waterWrite(paths, pD['Config File Name'], pD['N0'], pD['S'])
# Write the restraint pdb file.
commands = [ "NTrestraint " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['restraint'], fileName)) + " " \
+ str(pD['Restraint']) + "\n" ]
my.pdbWrite(paths['restraint'], fileName, package, commands)
# If the simulation is a New (not Minimization) run, we need to set the forcing
# and the thermostat parameters, and preheat the water.
if pD['Run Type'] == 'New':
# Write the forcing pdb file.
commands = [ "NTforcing " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['forcing'], fileName)) + " " \
+ str(pD['Force (pN)']) + "\n" ]
my.pdbWrite(paths['forcing'], fileName, package, commands)
# Write the Langevin pdb file.
commands = [ "NTtemperature " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['temperature'], fileName)) + " " \
+ str(pD['Damping']) + "\n" ]
my.pdbWrite(paths['temperature'], fileName, package, commands)
# Set up the temporary folder for the simulation.
paths['run'] = os.getenv('HOME') + '/' + pD['Data Folder'] + '/Preheat/'
# Create a NAMD configuration file for the preheating run.
preheatConfFile = confWrite(paths, pD, hostname, wisdomFile, preheat = True)
# Link all the necessary files back to the temporary run folder.
linkFiles(paths, pD, wisdomFile, preheat = True)
# Do the preheating run.
result, runTime = runSim(executable, paths['run'], preheatConfFile, \
pD['Config File Name'], hostname)
# Set up a temporary run folder. This is either for a production run or for a
# minimization run.
paths['run'] = os.getenv('HOME') + '/' + pD['Data Folder'] + '/'
# Create the NAMD configuration file for the run. Again, this is a production run
# or a minimization run.
confFile = confWrite(paths, pD, hostname, wisdomFile)
# Link all the necessary files back to the temporary run folder.
linkFiles(paths, pD, wisdomFile)
# Do the simulation!!
result, runTime = runSim(executable, paths['run'], confFile, pD['Config File Name'], hostname)
# If the run succeeded, log it to the appropriate spreadsheet.
if result == 0:
if not os.path.isfile(hostname + '.csv'):
print("################################################################\n" \
+ "Creating file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
outFile = open(hostname + '.csv', "w")
outFile.write("Date,Run Time (h),File Name,Folder,Run Type,N0,S,n,m," \
+ "Temperature (K),Damping,Thermostat," \
+ "Force (pN),PME,Restraint,Duration,Min Duration,dt (fs),outputFreq\n")
print("################################################################\n" \
+ "Writing to file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
outFile = open(hostname + '.csv', "a")
outFile.write(str(datetime.date.today()) + ',' \
+ "{:.5f}".format(runTime) + ',' \
+ pD['Data Folder'] + ',' \
+ pD['Top Folder'] + ',' \
+ pD['Run Type'] + ',' \
+ str(pD['N0']) + ',' \
+ str(pD['S']) + ',' \
+ str(pD['n']) + ',' \
+ str(pD['m']) + ',' \
+ str(pD['Temperature (K)']) + ',' \
+ str(pD['Damping']) + ',' \
+ pD['Thermostat'] + ',' \
+ str(pD['Force (pN)']) + ',' \
+ pD['PME'] + ','
+ str(pD['Restraint']) + ',' \
+ str(pD['Duration']) + ',' \
+ str(pD['Min Duration']) + ',' \
+ str(pD['dt (fs)']) + ',' \
+ str(pD['outputFreq']) + '\n')
print("################################################################\n" \
+ "Finished writing to file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
print("################################################################\n" \
+ "Moving " + paths['run'] + " to " + paths['data'] + ".\n" \
+ "################################################################\n")
# Move the temporary run file to the appropriate place in the data hierarchy.
shutil.move(paths['run'], paths['data'])
def linkFiles(paths, pD, wisdomFile, preheat=False):
paramFile = "par_all27_prot_lipid.prm"
print("################################################################\n" \
+ "Moving additional configuration files into " + paths['run'] + ".\n" \
+ "################################################################\n")
# Make a link to the parameter file in the simulation run folder
if not os.path.exists(paths['run'] + paramFile):
os.link(paths['param'] + paramFile, paths['run'] + paramFile)
# Make a link to the wisdom file in the simulation run folder
if (not os.path.exists(paths['run'] + wisdomFile)) \
and os.path.exists(paths['param'] + wisdomFile):
os.link(paths['param'] + wisdomFile, paths['run'] + wisdomFile)
# Make links to all the other configuration files in the simulation run folder
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.pdb'):
os.link(
my.configFile(paths['solvate'], pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] + '.psf'):
os.link(
my.configFile(paths['solvate'], pD['Config File Name'] + '.psf'),
paths['run'] + pD['Config File Name'] + '.psf')
if not os.path.exists(paths['run'] + pD['Config File Name'] +
'-restraint.pdb'):
os.link(
my.configFile(paths['restraint'], pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '-restraint.pdb')
if pD['Run Type'] == 'New':
if not os.path.exists(paths['run'] + pD['Config File Name'] +
'-langevin.pdb') and pD['Restraint'] != 0:
os.link(
my.configFile(paths['temperature'],
pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '-langevin.pdb')
if not preheat:
if not os.path.exists(paths['run'] + pD['Config File Name'] +
'-forcing.pdb'):
os.link(
my.configFile(paths['forcing'],
pD['Config File Name'] + '.pdb'),
paths['run'] + pD['Config File Name'] + '-forcing.pdb')
if not os.path.exists(paths['run'] + pD['Config File Name'] +
".restart.coor"):
os.link(
paths['run'] + "Preheat/" + pD['Data File Name'] +
".restart.coor",
paths['run'] + pD['Config File Name'] + ".restart.coor")
if not os.path.exists(paths['run'] + pD['Config File Name'] +
".restart.vel"):
os.link(
paths['run'] + "Preheat/" + pD['Data File Name'] +
".restart.vel",
paths['run'] + pD['Config File Name'] + ".restart.vel")
else:
if not os.path.exists(paths['run'] + pD['Config File Name'] +
".restart.coor"):
os.link(
paths['minimization'] + pD['Data File Name'] +
".restart.coor",
paths['run'] + pD['Config File Name'] + ".restart.coor")
def waterWrite(paths, fileName, N0, S):
""" waterWrite adds N0 + S water molecules to the inside of the nanotube,
then write out new psf and pdb files for the nanotube. """
if not my.needConfigFiles(paths['solvate'], fileName):
return
# Opens input nanotube psf and pdb files, and reads all the lines of each file into lists
with open(my.configFile(paths['pbc'], fileName + '.psf')) as psfFile:
psfLines = psfFile.readlines()
with open(my.configFile(paths['pbc'], fileName + '.pdb')) as pdbFile:
pdbLines = pdbFile.readlines()
# Grabs the lengths of each of the lists
lenPsf = len(psfLines)
lenPdb = len(pdbLines)
# String formats for the PSF and PDB file writing
# PDB
dampingCoeff = 0.00
oxygen = "ATOM{0:>7} OH2 TIP3 {1:4.0f} 0.000 0.000{2:>8.3f} 0.00 0.00 WTR O\n"
hydro1 = "ATOM{0:>7} H1 TIP3 {1:4.0f} 0.000 0.766{2:>8.3f} 0.00 0.00 WTR H\n"
hydro2 = "ATOM{0:>7} H2 TIP3 {1:4.0f} 0.000 -0.766{2:>8.3f} 0.00 0.00 WTR H\n"
# Psf
opsf = " {0:>5} WTR {1:<4} TIP3 OH2 OT -0.834000 15.9994 0\n"
h1psf = " {0:>5} WTR {1:<4} TIP3 H1 HT 0.417000 1.0080 0\n"
h2psf = " {0:>5} WTR {1:<4} TIP3 H2 HT 0.417000 1.0080 0\n"
# String format for the bonds and angles in the psf file
sBondFormat = " {0: >8}{1: >8}{2: >8}{3: >8}{4: >8}{5: >8}{6: >8}{7: >8}\n"
sAngleFormat = " {0: >8}{1: >8}{2: >8}{3: >8}{4: >8}{5: >8}{6: >8}{7: >8}{8: >8}\n"
# Initializing lists used below
atoms = []
bonds = []
angles = []
preAtoms = []
postAngles = []
intBonds = []
bondsFinal = []
intAngles = []
anglesFinal = []
# Finds the original number of atoms in the Pdb file
nAtoms = lenPdb - 2
# Calculates the new number of atoms after solvating
newAtoms = nAtoms + (3 * (N0 + S))
# Calculates the new number of bonds and angles after solvating
newBonds = int(nAtoms * (3. / 2)) + 2 * (N0 + S)
newAngles = nAtoms * 3 + (N0 + S)
# Iterates through all of the lines of the input Psf file, and records the
# index of the lines that contain the string !NATOM, !NBOND, and !NTHETA,
# as well as changes the line to update the new number of each
for i in range(0, lenPsf):
if "!NATOM" in psfLines[i]:
psfLines[i] = " {:3d} !NATOM\n".format(newAtoms)
atomIndex = i
elif "!NBOND" in psfLines[i]:
psfLines[i] = " {:3d} !NBOND: bonds\n".format(newBonds)
bondIndex = i
elif "!NTHETA" in psfLines[i]:
psfLines[i] = " {:3d} !NTHETA: angles\n".format(newAngles)
angleIndex = i
# Stores all of the original text lines that come before the atom section into a list
for i in range(0, atomIndex):
preAtoms.append(psfLines[i])
# Stores the atoms into a list
count = 1
while psfLines[atomIndex + count].strip():
atoms.append(psfLines[atomIndex + count])
count += 1
# Stores the bonds into a list
count = 1
while psfLines[bondIndex + count].strip():
bonds.append(psfLines[bondIndex + count])
count += 1
# Stores the angles into a list
count = 1
while psfLines[angleIndex + count].strip():
angles.append(psfLines[angleIndex + count])
count += 1
# Stores all the text lines after the angles into a list
for i in range(angleIndex + count, lenPsf):
postAngles.append(psfLines[i])
# Takes the bonds and angles in the original file and splits each line into individual numbers
for bond in bonds:
intBonds.append(bond.strip("\n").split())
for angle in angles:
intAngles.append(angle.strip("\n").split())
# Compresses the list of lists into a single list of all of the angles and bonds in the original file
intBonds = list(chain.from_iterable(intBonds))
intAngles = list(chain.from_iterable(intAngles))
# Adds the new atoms to the original list of atoms
for i in range(nAtoms + 1, (3 * (N0 + S)) + nAtoms + 1, 3):
atoms.append(opsf.format(i, int((i - nAtoms) / 3) + 2))
atoms.append(h1psf.format(i + 1, int((i - nAtoms) / 3) + 2))
atoms.append(h2psf.format(i + 2, int((i - nAtoms) / 3) + 2))
intAngles.append(str(i + 1))
intAngles.append(str(i))
intAngles.append(str(i + 2))
intBonds.append(str(i))
intBonds.append(str(i + 1))
intBonds.append(str(i))
intBonds.append(str(i + 2))
# Formats the list of bonds into the psf format with 8 columns
for i in range(0, len(intBonds), 8):
try:
bondsFinal.append(
sBondFormat.format(intBonds[i], intBonds[i + 1],
intBonds[i + 2], intBonds[i + 3],
intBonds[i + 4], intBonds[i + 5],
intBonds[i + 6], intBonds[i + 7]))
except:
diff = len(intBonds) - i
tempStr = ""
for j in range(i, i + diff):
tempStr = tempStr + "{:>8}".format(intBonds[j])
bondsFinal.append(" " + tempStr + "\n")
# Formates the list of angles into the psf format with 9 columns
for i in range(0, len(intAngles), 9):
try:
anglesFinal.append(
sAngleFormat.format(intAngles[i], intAngles[i + 1],
intAngles[i + 2], intAngles[i + 3],
intAngles[i + 4], intAngles[i + 5],
intAngles[i + 6], intAngles[i + 7],
intAngles[i + 8]))
except:
diff = len(intAngles) - i
tempStr = ""
for j in range(i, i + diff):
tempStr = tempStr + "{:>8}".format(intAngles[j])
anglesFinal.append(" " + tempStr + "\n")
oxZ = waterZ(N0, S)
for i in range(0, N0 + S):
hyZ = oxZ[i] + 0.570
if i == 0:
pdbLines[lenPdb - 1] = oxygen.format(nAtoms + 1, 2, oxZ[i])
pdbLines.append(hydro1.format(nAtoms + 2, 2, hyZ))
pdbLines.append(hydro2.format(nAtoms + 3, 2, hyZ))
else:
pdbLines.append(oxygen.format(nAtoms + 3 * i + 1, i + 2, oxZ[i]))
pdbLines.append(hydro1.format(nAtoms + (3 * i + 2), i + 2, hyZ))
pdbLines.append(hydro2.format(nAtoms + (3 * i + 3), i + 2, hyZ))
# Writes the new pdb lines to a new pdb file
pdbLines.append("END\n")
pdbOut = open(my.configFile(paths['solvate'], fileName + '-temp.pdb'), 'w')
pdbOut.writelines(pdbLines)
pdbOut.close()
# Writes the new psf lines to a new psf file
psfOut = open(my.configFile(paths['solvate'], fileName + '-temp.psf'), 'w')
psfOut.writelines(preAtoms)
psfOut.writelines(psfLines[atomIndex])
psfOut.writelines(atoms)
psfOut.writelines("\n" + psfLines[bondIndex])
psfOut.writelines(bondsFinal)
psfOut.writelines("\n" + psfLines[angleIndex])
psfOut.writelines(anglesFinal)
psfOut.writelines(postAngles)
psfOut.close()
print("################################################################\n" \
+ "Post-processing the CNT and rewriting configuration files.\n" \
+ "################################################################\n")
package = "package require CNTtools 1.0\n"
commands = [
"centerNT " + my.quoted(my.configFile(paths['solvate'], fileName)) +
"\n"
]
my.pdbWrite(my.config(paths['solvate']), fileName, package, commands)
# Delete the now-uneeded -temp pdb and psf files.
os.remove(my.config(paths['solvate']) + fileName + "-temp.pdb")
os.remove(my.config(paths['solvate']) + fileName + "-temp.psf")
def cntWrite(paths, fileName, N0, n, m):
""" cntWrite creates a periodic nanotube with the following input parameters:
fileName is the name of the initial nanotube with number of rings N0 and
dimensions n x m."""
# Bonds lengths of different armchair nanotubes in nanometers
s0 = 0.1418
# calculates the length of the nanotube based on bond lengths
l = float(N0 - 0.75) * s0 * np.sqrt(3)
if os.path.isfile(my.configFile(paths['pbc'], fileName + '.psf')) \
and os.path.isfile(my.configFile(paths['pbc'], fileName + '.pdb')):
print("################################################################\n" \
+ "Configuration files already exist in:\n" + my.config(paths['pbc']) + ".\n" \
+ "################################################################\n")
return
print("################################################################\n" \
+ "Running VMD to generate nanotube configuration files.\n" \
+ "################################################################\n")
if not os.path.exists(my.config(paths['N0'])):
os.makedirs(my.config(paths['N0']))
if not os.path.exists(my.config(paths['pbc'])):
os.makedirs(my.config(paths['pbc']))
# Create the nanotube in VMD
logFile = open(my.config(paths['N0']) + fileName + ".log", "w")
# Opening a pipe to VMD in the shell
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools 1.0\n"
genNT = "genNT " + my.quoted(fileName) + " " + my.quoted(my.config(paths['N0'])) + " " \
+ str(l) + " " + str(n) + " " + str(m) + "\n"
# run commands through pipe and saves to file
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(genNT)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
# Make the nanotube periodic in VMD
logFile = open(my.config(paths['pbc']) + fileName + ".log", "w")
# Opening a pipe to VMD in the shell
VMDin=subprocess.Popen(["vmd", "-dispdev", "none"], stdin=subprocess.PIPE, \
stdout=logFile)
CNTtools = "package require CNTtools\n"
pbcNT = "pbcNT " + my.quoted(my.config(paths['N0']) + fileName) + " " \
+ my.quoted(my.config(paths['pbc']) + fileName) + " default\n"
# run commands through pipe and saves to file
VMDin.stdin.write(CNTtools)
VMDin.stdin.write(pbcNT)
VMDin.stdin.flush()
VMDin.stdin.close
VMDin.communicate()
# Delete the now-uneeded -prebond pdb and psf files
os.remove(my.config(paths['pbc']) + fileName + "-prebond.pdb")
os.remove(my.config(paths['pbc']) + fileName + "-prebond.psf")
# Read back in the pdb file and make sure the z-coordinate spacing is regular
alignCNT(my.config(paths['pbc']) + fileName + ".pdb")
def run(pD):
""" This is the main entry point for performing simulations with a carbon nanotube
and water. It takes a python dictionary of simulation parameters as its
argument. Before calling run, you must call myutil.setWaterParamDefaults()
to create the dictionary."""
# The paths dictionary holds the path name to each tier of the data hierarchy.
paths = my.makeWaterPaths(pD)
# Find the hostname and set the name of the wisdom file used by PME.
hostname = socket.gethostname().partition('.')[0]
wisdomFile = "FFTW_NAMD_2.11_" + hostname + ".txt"
# If we're doing a production run (not a minimization) on nanotube, we want to
# use the GPU, so we run the CUDA version of namd2. The CUDA version of namd seems
# to give errors occasionally when minimizing, so we don't use it for that.
if pD['Run Type'] == 'Minimize':
executable = 'namd2'
else:
if hostname == 'nanotube':
executable = 'namd2-cuda'
else:
executable = 'namd2'
# If the data folder for the simulation already exists, abort, under the assumption
# that this is an accidental duplicate of an earlier run. New runs should go into
# their own folders.
if os.path.exists(paths['data']):
print("################################################################\n" \
+ "Data folder for " + pD['Run Type'] + " run already exists ... aborting.\n" \
+ "################################################################\n")
return
# This is the base name for all the various pdb and psf files we will generate.
fileName = pD['Config File Name']
# Bonds lengths of armchair nanotubes in nanometers. From this we'll calculate the
# actual length of the nanotube in nanometers to feed to VMD.
s0 = 0.1418
l = float(pD['N0'] - 0.75) * s0 * np.sqrt(3)
# Create the desired nanotube. The files will be stored in the 'Config Files' folder
# in the folder pointed to by paths['N0'].
package = "package require CNTtools 1.0\n"
commands = [ "genNT " \
+ my.quoted(my.configFile(paths['N0'], fileName)) + " " \
+ str(l) + " " + str(pD['n']) + " " + str(pD['m']) + "\n" ]
my.pdbWrite(paths['N0'], fileName, package, commands)
# Now we'll make the nanotube periodic in the z direction.
commands = [ "pbcNT " + my.quoted(my.configFile(paths['N0'], fileName)) + " " \
+ my.quoted(my.configFile(paths['pbc'], fileName)) + " default\n" ]
my.pdbWrite(paths['pbc'], fileName, package, commands)
# Delete the now-uneeded -prebond pdb and psf files.
if os.path.exists(my.config(paths['pbc']) + fileName + "-prebond.pdb"):
os.remove(my.config(paths['pbc']) + fileName + "-prebond.pdb")
if os.path.exists(my.config(paths['pbc']) + fileName + "-prebond.psf"):
os.remove(my.config(paths['pbc']) + fileName + "-prebond.psf")
# Read back in the pdb file and make sure the z-coordinate spacing is regular.
alignCNT(my.config(paths['pbc']) + fileName + ".pdb")
# cntWrite(paths, pD['Config File Name'], pD['N0'], pD['n'], pD['m'])
# Add the water to the carbon nanotube, and center the nanotube in the box.
waterWrite(paths, pD['Config File Name'], pD['N0'], pD['S'])
# Write the restraint pdb file.
commands = [ "NTrestraint " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['restraint'], fileName)) + " " \
+ str(pD['Restraint']) + "\n" ]
my.pdbWrite(paths['restraint'], fileName, package, commands)
# If the simulation is a New (not Minimization) run, we need to set the forcing
# and the thermostat parameters, and preheat the water.
if pD['Run Type'] == 'New':
# Write the forcing pdb file.
commands = [ "NTforcing " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['forcing'], fileName)) + " " \
+ str(pD['Force (pN)']) + "\n" ]
my.pdbWrite(paths['forcing'], fileName, package, commands)
# Write the Langevin pdb file.
commands = [ "NTtemperature " \
+ my.quoted(my.configFile(paths['solvate'], fileName)) + " " \
+ my.quoted(my.configFile(paths['temperature'], fileName)) + " " \
+ str(pD['Damping']) + "\n" ]
my.pdbWrite(paths['temperature'], fileName, package, commands)
# Set up the temporary folder for the simulation.
paths['run'] = os.getenv(
'HOME') + '/' + pD['Data Folder'] + '/Preheat/'
# Create a NAMD configuration file for the preheating run.
preheatConfFile = confWrite(paths,
pD,
hostname,
wisdomFile,
preheat=True)
# Link all the necessary files back to the temporary run folder.
linkFiles(paths, pD, wisdomFile, preheat=True)
# Do the preheating run.
result, runTime = runSim(executable, paths['run'], preheatConfFile, \
pD['Config File Name'], hostname)
# Set up a temporary run folder. This is either for a production run or for a
# minimization run.
paths['run'] = os.getenv('HOME') + '/' + pD['Data Folder'] + '/'
# Create the NAMD configuration file for the run. Again, this is a production run
# or a minimization run.
confFile = confWrite(paths, pD, hostname, wisdomFile)
# Link all the necessary files back to the temporary run folder.
linkFiles(paths, pD, wisdomFile)
# Do the simulation!!
result, runTime = runSim(executable, paths['run'], confFile,
pD['Config File Name'], hostname)
# If the run succeeded, log it to the appropriate spreadsheet.
if result == 0:
if not os.path.isfile(hostname + '.csv'):
print("################################################################\n" \
+ "Creating file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
outFile = open(hostname + '.csv', "w")
outFile.write("Date,Run Time (h),File Name,Folder,Run Type,N0,S,n,m," \
+ "Temperature (K),Damping,Thermostat," \
+ "Force (pN),PME,Restraint,Duration,Min Duration,dt (fs),outputFreq\n")
print("################################################################\n" \
+ "Writing to file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
outFile = open(hostname + '.csv', "a")
outFile.write(str(datetime.date.today()) + ',' \
+ "{:.5f}".format(runTime) + ',' \
+ pD['Data Folder'] + ',' \
+ pD['Top Folder'] + ',' \
+ pD['Run Type'] + ',' \
+ str(pD['N0']) + ',' \
+ str(pD['S']) + ',' \
+ str(pD['n']) + ',' \
+ str(pD['m']) + ',' \
+ str(pD['Temperature (K)']) + ',' \
+ str(pD['Damping']) + ',' \
+ pD['Thermostat'] + ',' \
+ str(pD['Force (pN)']) + ',' \
+ pD['PME'] + ','
+ str(pD['Restraint']) + ',' \
+ str(pD['Duration']) + ',' \
+ str(pD['Min Duration']) + ',' \
+ str(pD['dt (fs)']) + ',' \
+ str(pD['outputFreq']) + '\n')
print("################################################################\n" \
+ "Finished writing to file " + hostname + ".csv." + "\n" \
+ "################################################################\n")
print("################################################################\n" \
+ "Moving " + paths['run'] + " to " + paths['data'] + ".\n" \
+ "################################################################\n")
# Move the temporary run file to the appropriate place in the data hierarchy.
shutil.move(paths['run'], paths['data'])