def test_seed(Simulator, seed):
with nengo.Network() as model:
a = nengo.Node(WhiteSignal(0.1, high=100, seed=seed))
b = nengo.Node(WhiteSignal(0.1, high=100, seed=seed + 1))
c = nengo.Node(WhiteSignal(0.1, high=100))
d = nengo.Node(WhiteNoise(seed=seed))
e = nengo.Node(WhiteNoise())
ap = nengo.Probe(a)
bp = nengo.Probe(b)
cp = nengo.Probe(c)
dp = nengo.Probe(d)
ep = nengo.Probe(e)
with Simulator(model) as sim1:
sim1.run(0.1)
with Simulator(model) as sim2:
sim2.run(0.1)
tols = dict(atol=1e-7, rtol=1e-4)
assert np.allclose(sim1.data[ap], sim2.data[ap], **tols)
assert np.allclose(sim1.data[bp], sim2.data[bp], **tols)
assert not np.allclose(sim1.data[cp], sim2.data[cp], **tols)
assert not np.allclose(sim1.data[ap], sim1.data[bp], **tols)
assert np.allclose(sim1.data[dp], sim2.data[dp], **tols)
assert not np.allclose(sim1.data[ep], sim2.data[ep], **tols)
def test_whitesignal_high_errors(Simulator, dt, high, seed):
"""Check for errors if ``high`` is not between 1/period and nyquist frequency."""
with pytest.raises(ValidationError, match="Make ``high >= 1. / period``"):
process = WhiteSignal(period=10 * dt, high=9 * dt)
process = WhiteSignal(1.0, high=high)
with nengo.Network() as model:
nengo.Node(process, size_out=1)
with pytest.raises(ValidationError,
match="High must not exceed the Nyquist"):
Simulator(model, dt=dt, seed=seed)
def test_whitesignal_continuity(rng, plt):
"""Test that WhiteSignal is continuous over multiple periods."""
rms = 0.5
high = 10
dt = 0.001
t = 1
process = WhiteSignal(t, high=high, rms=rms)
x = process.run(4 * t, d=1, dt=dt, rng=rng)
plt.plot(process.ntrange(len(x), dt=dt), x)
# tolerances approximated from derivatives of sine wave of highest freq
safety_factor = 2.
a, f = np.sqrt(2) * rms, (2 * np.pi * high) * dt
assert abs(np.diff(x, axis=0)).max() <= safety_factor * a * f
assert abs(np.diff(x, n=2, axis=0)).max() <= safety_factor**2 * a * f**2
def test_reset(Simulator, nl_nodirect, seed, rng):
"""Make sure resetting actually resets."""
m = nengo.Network(seed=seed)
with m:
m.config[nengo.Ensemble].neuron_type = nl_nodirect()
u = nengo.Node(WhiteSignal(0.3, high=10), size_out=2)
ens = nengo.Ensemble(60, dimensions=2)
square = nengo.Ensemble(60, dimensions=2)
nengo.Connection(u, ens)
nengo.Connection(ens,
square,
function=lambda x: x**2,
solver=LstsqL2nz(weights=True))
square_p = nengo.Probe(square, synapse=0.01)
with Simulator(m, seed=seed + 1) as sim:
sim.run(0.1)
sim.run(0.2)
t1 = sim.trange()
square1 = np.array(sim.data[square_p])
sim.reset()
sim.run(0.3)
assert np.allclose(sim.trange(), t1)
assert np.allclose(sim.data[square_p], square1)
def create_model():
dimensions = 4
model = nengo.Network()
with model:
num_neurons = dimensions * 30
inp = nengo.Node(WhiteSignal(num_neurons, high=5),
size_out=dimensions,
label="white_noise")
pre = nengo.Ensemble(num_neurons, dimensions=dimensions, label="pre")
nengo.Connection(inp, pre)
post = nengo.Ensemble(num_neurons, dimensions=dimensions, label="post")
conn = nengo.Connection(
pre, post, function=lambda x: np.random.random(dimensions))
inp_p = nengo.Probe(inp, label="inp_p")
pre_p = nengo.Probe(pre, synapse=0.01, label="pre_p")
post_p = nengo.Probe(post, synapse=0.01, label="post_p")
error = nengo.Ensemble(num_neurons,
dimensions=dimensions,
label="error")
error_p = nengo.Probe(error, synapse=0.03, label="error_p")
# Error = actual - target = post - pre
nengo.Connection(post, error)
nengo.Connection(pre, error, transform=-1)
# Add the learning rule to the connection
conn.learning_rule_type = nengo.PES()
# Connect the error into the learning rule
nengo.Connection(error, conn.learning_rule)
return model, list(), dict()
def test_whitesignal_high_dt(Simulator, high, dt, seed, plt):
t = 1.
rms = 0.5
d = 500
process = WhiteSignal(t, high, rms=rms)
with nengo.Network() as model:
u = nengo.Node(process, size_out=d)
up = nengo.Probe(u)
with Simulator(model, seed=seed, dt=dt) as sim:
sim.run(t)
values = sim.data[up]
freq, val_psd = psd(values, dt=dt)
trange = sim.trange()
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, high=%d Hz" % high)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
plt.xlim(right=high * 2.0)
assert np.allclose(np.std(values, axis=1), rms, rtol=0.15)
assert np.all(val_psd[npext.rfftfreq(len(trange), dt) > high] < rms * 0.5)
def test_whitesignal_continuity(rng, plt):
"""Test that WhiteSignal is continuous over multiple periods."""
rms = 0.5
high = 10
dt = 0.001
t = 1
process = WhiteSignal(t, high=high, rms=rms)
x = process.run(4 * t, d=1, dt=dt, rng=rng)
plt.plot(process.ntrange(len(x), dt=dt), x)
# tolerances approximated from derivatives of sine wave of highest freq
safety_factor = 2.
a, f = np.sqrt(2) * rms, (2 * np.pi * high) * dt
assert abs(np.diff(x, axis=0)).max() <= safety_factor * a * f
assert abs(np.diff(x, n=2, axis=0)).max() <= safety_factor**2 * a * f**2
def run_synapse(Simulator,
seed,
synapse,
dt=1e-3,
runtime=0.2,
high=100,
n_neurons=None):
model = nengo.Network(seed=seed)
with model:
u = nengo.Node(output=WhiteSignal(runtime, high=high))
if n_neurons is not None:
a = nengo.Ensemble(n_neurons, 1)
nengo.Connection(u, a, synapse=None)
target = a
else:
target = u
ref = nengo.Probe(target)
filtered = nengo.Probe(target, synapse=synapse)
with Simulator(model, dt=dt, seed=seed + 1) as sim:
sim.run(runtime)
return sim.trange(), sim.data[ref], sim.data[filtered]
def test_whitesignal_nyquist(Simulator, dt, high, seed):
# check that high cannot exceed nyquist frequency
process = WhiteSignal(1.0, high=high)
with nengo.Network() as model:
nengo.Node(process, size_out=1)
with pytest.raises(ValidationError):
Simulator(model, dt=dt, seed=seed)
def delayed_synapse():
a = 0.1 # desired delay
b = 0.01 # synapse delay
tau = 0.01 # recurrent tau
hz = 15 # input frequency
t = 1.0 # simulation time
dt = 0.00001 # simulation timestep
order = 6 # order of pade approximation
tau_probe = 0.02
dexp_synapse = DoubleExp(tau, tau / 5)
sys_lambert = lambert_delay(a, b, tau, order - 1, order)
synapse = (cont2discrete(Lowpass(tau), dt=dt) *
DiscreteDelay(int(b / dt)))
n_neurons = 2000
neuron_type = PerfectLIF()
A, B, C, D = sys_lambert.observable.transform(5*np.eye(order)).ss
sys_normal = PadeDelay(a, order)
assert len(sys_normal) == order
with Network(seed=0) as model:
stim = Node(output=WhiteSignal(t, high=hz, y0=0))
x = EnsembleArray(n_neurons / order, len(A), neuron_type=neuron_type)
output = Node(size_in=1)
Connection(x.output, x.input, transform=A, synapse=synapse)
Connection(stim, x.input, transform=B, synapse=synapse)
Connection(x.output, output, transform=C, synapse=None)
Connection(stim, output, transform=D, synapse=None)
lowpass_delay = LinearNetwork(
sys_normal, n_neurons_per_ensemble=n_neurons / order,
synapse=tau, input_synapse=tau,
dt=None, neuron_type=neuron_type, radii=1.0)
Connection(stim, lowpass_delay.input, synapse=None)
dexp_delay = LinearNetwork(
sys_normal, n_neurons_per_ensemble=n_neurons / order,
synapse=dexp_synapse, input_synapse=dexp_synapse,
dt=None, neuron_type=neuron_type, radii=1.0)
Connection(stim, dexp_delay.input, synapse=None)
p_stim = Probe(stim, synapse=tau_probe)
p_output_delayed = Probe(output, synapse=tau_probe)
p_output_lowpass = Probe(lowpass_delay.output, synapse=tau_probe)
p_output_dexp = Probe(dexp_delay.output, synapse=tau_probe)
with Simulator(model, dt=dt, seed=0) as sim:
sim.run(t)
return (a, dt, sim.trange(), sim.data[p_stim],
sim.data[p_output_delayed], sim.data[p_output_lowpass],
sim.data[p_output_dexp])
def test_window_function():
process = WhiteSignal(1.0, 10)
with pytest.raises(ValidationError):
RollingWindow(theta=1.0, n_neurons=1, process=process,
eval_points=cube)
rw = RollingWindow(theta=1.0, n_neurons=1, process=None)
with pytest.raises(ValidationError):
rw.add_output(function=lambda a, b: a)
def test_izhikevich(Simulator, plt, seed, rng):
"""Smoke test for using Izhikevich neurons.
Tests that the 6 parameter sets listed in the original paper can be
simulated in Nengo (but doesn't test any properties of them).
"""
with nengo.Network() as m:
u = nengo.Node(output=WhiteSignal(0.6, high=10), size_out=1)
# Seed the ensembles (not network) so we get the same sort of neurons
ens_args = {'n_neurons': 4, 'dimensions': 1, 'seed': seed}
rs = nengo.Ensemble(neuron_type=nengo.Izhikevich(), **ens_args)
ib = nengo.Ensemble(neuron_type=nengo.Izhikevich(reset_voltage=-55,
reset_recovery=4),
**ens_args)
ch = nengo.Ensemble(neuron_type=nengo.Izhikevich(reset_voltage=-50,
reset_recovery=2),
**ens_args)
fs = nengo.Ensemble(neuron_type=nengo.Izhikevich(tau_recovery=0.1),
**ens_args)
lts = nengo.Ensemble(neuron_type=nengo.Izhikevich(coupling=0.25),
**ens_args)
rz = nengo.Ensemble(neuron_type=nengo.Izhikevich(tau_recovery=0.1,
coupling=0.26),
**ens_args)
ensembles = (rs, ib, ch, fs, lts, rz)
out = {}
spikes = {}
for ens in ensembles:
nengo.Connection(u, ens)
out[ens] = nengo.Probe(ens, synapse=0.05)
spikes[ens] = nengo.Probe(ens.neurons)
up = nengo.Probe(u)
with Simulator(m, seed=seed + 1) as sim:
sim.run(0.6)
t = sim.trange()
def plot(ens, title, ix):
ax = plt.subplot(len(ensembles), 1, ix)
plt.title(title)
plt.plot(t, sim.data[out[ens]], c='k', lw=1.5)
plt.plot(t, sim.data[up], c='k', ls=':')
ax = ax.twinx()
ax.set_yticks(())
rasterplot(t, sim.data[spikes[ens]], ax=ax)
plt.figure(figsize=(10, 12))
plot(rs, "Regular spiking", 1)
plot(ib, "Intrinsically bursting", 2)
plot(ch, "Chattering", 3)
plot(fs, "Fast spiking", 4)
plot(lts, "Low-threshold spiking", 5)
plot(rz, "Resonator", 6)
def test_invalid_sample():
process = WhiteSignal(1.0, high=10)
sys = PadeDelay(0.1, order=4)
dist = EvalPoints(sys, process)
with pytest.raises(ValidationError):
dist.sample(100, len(sys)) # needs to equal sys.size_out
dist = Encoders(sys, process)
with pytest.raises(ValidationError):
dist.sample(100, len(sys)) # needs to equal sys.size_out
def test_whitesignal_rms(rms, rng, plt):
d = 500
t = 1
dt = 0.001
process = WhiteSignal(t, rms=rms)
values = process.run(t, d=d, dt=dt, rng=rng)
freq, val_psd = psd(values)
trange = process.trange(t, dt=dt)
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, rms=%.1f" % rms)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
assert np.allclose(np.std(values), rms, rtol=0.02)
assert np.allclose(val_psd[1:-1], rms, rtol=0.35)
def test_whitesignal_rms(rms, rng, plt):
d = 500
t = 1
dt = 0.001
process = WhiteSignal(t, rms=rms)
values = process.run(t, d=d, dt=dt, rng=rng)
freq, val_psd = psd(values)
trange = process.trange(t, dt=dt)
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, rms=%.1f" % rms)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
assert np.allclose(np.std(values), rms, rtol=0.02)
assert np.allclose(val_psd[1:-1], rms, rtol=0.35)
def test_processes():
assert (
repr(WhiteSignal(0.2, 10, rms=0.3))
== "WhiteSignal(period=0.2, high=10, rms=0.3)"
)
check_init_args(WhiteNoise, ["dist", "scale"])
check_repr(WhiteNoise(scale=False))
assert repr(WhiteNoise()) == "WhiteNoise()"
assert repr(WhiteNoise(scale=False)) == "WhiteNoise(scale=False)"
check_init_args(FilteredNoise, ["synapse", "dist", "scale"])
check_repr(FilteredNoise(scale=False))
assert repr(FilteredNoise()) == "FilteredNoise()"
assert repr(FilteredNoise(scale=False)) == "FilteredNoise(scale=False)"
check_init_args(BrownNoise, ["dist"])
check_repr(BrownNoise())
assert repr(BrownNoise()) == "BrownNoise()"
check_init_args(PresentInput, ["inputs", "presentation_time"])
check_repr(PresentInput(inputs=np.array([1.2, 3.4]), presentation_time=5))
assert (
repr(PresentInput((1.2, 3.4), 5))
== "PresentInput(inputs=array([1.2, 3.4]), presentation_time=5)"
)
check_init_args(WhiteSignal, ["period", "high", "rms", "y0"])
check_repr(WhiteSignal(period=1.2, high=3.4, rms=5.6, y0=7.8))
assert repr(WhiteSignal(1, 2)) == "WhiteSignal(period=1, high=2)"
assert (
repr(WhiteSignal(1.2, 3.4, 5.6, 7.8))
== "WhiteSignal(period=1.2, high=3.4, rms=5.6, y0=7.8)"
)
check_init_args(Piecewise, ["data", "interpolation"])
check_repr(Piecewise(data={1: 0.1, 2: 0.2, 3: 0.3}))
assert (
repr(Piecewise({1: 0.1, 2: 0.2, 3: 0.3}))
== "Piecewise(data={1: array([0.1]), 2: array([0.2]), 3: array([0.3])})"
)
class SignalGenerator(Process):
def __init__(self, duration, high=5.):
self._whitenoise = WhiteSignal(duration, high=high)
def make_step(self, size_in, size_out, dt, rng=np.random):
return functools.partial(
self.sample,
sample_whitenoise=self._whitenoise.make_step(size_in, size_out, dt, rng))
@staticmethod
def sample(t, sample_whitenoise):
sampled = sample_whitenoise(t)
return sampled / np.linalg.norm(sampled)
def test_whitesignal_high(high, rng, plt):
rms = 0.5
d = 500
t = 1
dt = 0.001
process = WhiteSignal(t, high, rms=rms)
values = process.run(t, d=d, dt=dt, rng=rng)
freq, val_psd = psd(values)
trange = process.trange(t, dt=dt)
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, high=%d Hz" % high)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
plt.xlim(right=high * 2.0)
assert np.allclose(np.std(values, axis=1), rms, rtol=0.15)
assert np.all(val_psd[npext.rfftfreq(t, dt) > high] < rms * 0.5)
def test_whitesignal_high(high, rng, plt):
rms = 0.5
d = 500
t = 1
dt = 0.001
process = WhiteSignal(t, high, rms=rms)
values = process.run(t, d=d, dt=dt, rng=rng)
freq, val_psd = psd(values)
trange = process.trange(t, dt=dt)
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, high=%d Hz" % high)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
plt.xlim(right=high * 2.0)
assert np.allclose(np.std(values, axis=1), rms, rtol=0.15)
assert np.all(val_psd[npext.rfftfreq(t, dt) > high] < rms * 0.5)
def test_whitesignal_y0(Simulator, seed, y0, d):
t = .1
process = WhiteSignal(t, high=500, y0=y0)
with nengo.Network() as model:
u = nengo.Node(process, size_out=d)
up = nengo.Probe(u)
with Simulator(model, seed=seed) as sim:
sim.run(t)
values = sim.data[up]
error = np.min(abs(y0 - values), axis=0)
assert ((y0 - error <= values[0, :]) & (values[0, :] <= y0 + error)).all()
def discrete_example(seed, dt):
n_neurons = 1000
theta = 0.1
freq = 50
q = 27
radii = 1.0
sys = PadeDelay(theta, q)
T = 5000*(dt+0.001)
rms = 1.0
signal = WhiteSignal(T, high=freq, rms=rms, y0=0)
tau = 0.1
tau_probe = 0.02
reg = 0.1
# Determine radii using direct mode
with LinearNetwork(
sys, n_neurons_per_ensemble=1, input_synapse=tau, synapse=tau,
dt=dt, neuron_type=Direct(),
realizer=Balanced()) as model:
Connection(Node(output=signal), model.input, synapse=None)
p_x = Probe(model.state.input, synapse=None)
with Simulator(model, dt=dt, seed=seed+1) as sim:
sim.run(T)
radii *= np.max(abs(sim.data[p_x]), axis=0)
logging.info("Radii: %s", radii)
with Network(seed=seed) as model:
u = Node(output=signal)
kwargs = dict(
n_neurons_per_ensemble=n_neurons / len(sys),
input_synapse=tau, synapse=tau, radii=radii,
solver=LstsqL2(reg=reg), realizer=Balanced())
delay_disc = LinearNetwork(sys, dt=dt, **kwargs)
delay_cont = LinearNetwork(sys, dt=None, **kwargs)
Connection(u, delay_disc.input, synapse=None)
Connection(u, delay_cont.input, synapse=None)
p_u = Probe(u, synapse=tau_probe)
p_y_disc = Probe(delay_disc.output, synapse=tau_probe)
p_y_cont = Probe(delay_cont.output, synapse=tau_probe)
with Simulator(model, dt=dt, seed=seed) as sim:
sim.run(T)
return (theta, dt, sim.trange(), sim.data[p_u],
sim.data[p_y_disc], sim.data[p_y_cont])
def _test_rates(Simulator, rates, plt, seed):
n = 100
intercepts = np.linspace(-0.99, 0.99, n)
model = nengo.Network(seed=seed)
with model:
model.config[nengo.Ensemble].max_rates = Choice([50])
model.config[nengo.Ensemble].encoders = Choice([[1]])
u = nengo.Node(output=WhiteSignal(2, high=5))
a = nengo.Ensemble(n,
1,
intercepts=intercepts,
neuron_type=nengo.LIFRate())
b = nengo.Ensemble(n,
1,
intercepts=intercepts,
neuron_type=nengo.LIF())
nengo.Connection(u, a, synapse=0)
nengo.Connection(u, b, synapse=0)
up = nengo.Probe(u)
ap = nengo.Probe(a.neurons)
bp = nengo.Probe(b.neurons)
with Simulator(model, seed=seed + 1) as sim:
sim.run(2.)
t = sim.trange()
x = sim.data[up]
a_rates = sim.data[ap]
spikes = sim.data[bp]
b_rates = rates(t, spikes)
if plt is not None:
ax = plt.subplot(411)
plt.plot(t, x)
ax = plt.subplot(412)
implot(plt, t, intercepts, a_rates.T, ax=ax)
ax.set_ylabel('intercept')
ax = plt.subplot(413)
implot(plt, t, intercepts, b_rates.T, ax=ax)
ax.set_ylabel('intercept')
ax = plt.subplot(414)
implot(plt, t, intercepts, (b_rates - a_rates).T, ax=ax)
ax.set_xlabel('time [s]')
ax.set_ylabel('intercept')
tmask = (t > 0.1) & (t < 1.9)
relative_rmse = rms(b_rates[tmask] - a_rates[tmask]) / rms(a_rates[tmask])
return relative_rmse
def test_unsupervised(Simulator, rule_type, solver, seed, rng, plt, allclose):
n = 200
m = nengo.Network(seed=seed)
with m:
u = nengo.Node(WhiteSignal(0.5, high=10), size_out=2)
a = nengo.Ensemble(n, dimensions=2)
b = nengo.Ensemble(n + 1, dimensions=2)
nengo.Connection(u, a)
if solver:
conn = nengo.Connection(a,
b,
solver=nengo.solvers.LstsqL2(weights=True))
else:
initial_weights = rng.uniform(high=1e-3,
size=(b.n_neurons, a.n_neurons))
conn = nengo.Connection(a.neurons,
b.neurons,
transform=initial_weights)
conn.learning_rule_type = rule_type
inp_p = nengo.Probe(u)
weights_p = nengo.Probe(conn, "weights", sample_every=0.01)
ap = nengo.Probe(a, synapse=0.03)
up = nengo.Probe(b, synapse=0.03)
with Simulator(m, seed=seed + 1) as sim:
sim.run(0.5)
t = sim.trange()
plt.subplot(2, 1, 1)
plt.plot(t, sim.data[inp_p], label="Input")
plt.plot(t, sim.data[ap], label="Pre")
plt.plot(t, sim.data[up], label="Post")
plt.legend(loc="best", fontsize="x-small")
plt.subplot(2, 1, 2)
best_ix = best_weights(sim.data[weights_p])
plt.plot(sim.trange(sample_every=0.01), sim.data[weights_p][..., best_ix])
plt.xlabel("Time (s)")
plt.ylabel("Weights")
assert not allclose(sim.data[weights_p][0],
sim.data[weights_p][-1],
record_rmse=False,
print_fail=0)
def test_pes_synapse(Simulator, seed, pre_synapse, allclose):
rule = PES(pre_synapse=pre_synapse)
with nengo.Network(seed=seed) as model:
stim = nengo.Node(output=WhiteSignal(0.5, high=10))
x = nengo.Ensemble(100, 1)
nengo.Connection(stim, x, synapse=None)
conn = nengo.Connection(x, x, learning_rule_type=rule)
p_neurons = nengo.Probe(x.neurons, synapse=pre_synapse)
p_pes = nengo.Probe(conn.learning_rule, "activities")
with Simulator(model) as sim:
sim.run(0.5)
assert allclose(sim.data[p_neurons][1:, :], sim.data[p_pes][:-1, :])
def test_white_signal():
model = nengo.Network()
with model:
inp = nengo.Node(WhiteSignal(60, high=5), size_out=2)
inp_p = nengo.Probe(inp)
nengo_spinnaker.add_spinnaker_params(model.config)
model.config[inp].function_of_time = True
sim = nengo_spinnaker.Simulator(model)
with sim:
sim.run(0.2)
# Read data
in_data = sim.data[inp_p]
# Check that the input value actually changes
assert np.any(in_data[5] != in_data[6:])
def test_echo_state(Simulator, plt, seed, rng, include_bias):
test_t = 1.0
train_t = 5.0
dt = 0.001
n_neurons = 1000
dimensions = 2
process = WhiteSignal(train_t, high=10)
with Network(seed=seed) as model:
stim = nengo.Node(output=process, size_out=dimensions)
esn = EchoState(n_neurons,
dimensions,
include_bias=include_bias,
rng=rng)
nengo.Connection(stim, esn.input, synapse=None)
p = nengo.Probe(esn.output, synapse=None)
p_stim = nengo.Probe(stim, synapse=None)
# train the reservoir to compute a highpass filter
def function(x):
return Highpass(0.01).filt(x, dt=dt)
esn.train(function, test_t, dt, process, seed=seed)
with Simulator(model, dt=dt, seed=seed + 1) as sim:
sim.run(test_t)
ideal = function(sim.data[p_stim])
plt.figure()
plt.plot(sim.trange(), sim.data[p_stim], label="Input")
plt.plot(sim.trange(), sim.data[p], label="Output")
plt.plot(sim.trange(), ideal, label="Ideal")
plt.legend()
if include_bias:
assert rmse(sim.data[p], ideal) <= 0.5 * rms(ideal)
else:
assert rmse(sim.data[p], ideal) <= 0.7 * rms(ideal)
def test_dt_dependence(Simulator, nl_nodirect, plt, seed, rng):
"""Neurons should not wildly change with different dt."""
with nengo.Network(seed=seed) as m:
m.config[nengo.Ensemble].neuron_type = nl_nodirect()
u = nengo.Node(output=WhiteSignal(0.1, 5), size_out=2)
pre = nengo.Ensemble(60, dimensions=2)
square = nengo.Ensemble(60, dimensions=2)
nengo.Connection(u, pre)
nengo.Connection(pre, square, function=lambda x: x**2)
activity_p = nengo.Probe(square.neurons,
synapse=.05,
sample_every=0.001)
out_p = nengo.Probe(square, synapse=.05, sample_every=0.001)
activity_data = []
out_data = []
dts = (0.0001, 0.001)
colors = ('b', 'g', 'r')
for c, dt in zip(colors, dts):
sim = Simulator(m, dt=dt, seed=seed + 1)
sim.run(0.1)
t = sim.trange(dt=0.001)
activity_data.append(sim.data[activity_p])
out_data.append(sim.data[out_p])
plt.subplot(2, 1, 1)
plt.plot(t, sim.data[out_p], c=c)
plt.subplot(2, 1, 2)
# Just plot 5 neurons
plt.plot(t, sim.data[activity_p][..., :5], c=c)
plt.subplot(2, 1, 1)
plt.xlim(right=t[-1])
plt.ylabel("Decoded output")
plt.subplot(2, 1, 2)
plt.xlim(right=t[-1])
plt.ylabel("Neural activity")
assert rmse(activity_data[0], activity_data[1]) < ((1. / dt) * 0.01)
assert np.allclose(out_data[0], out_data[1], atol=0.05)
def test_whitesignal_continuity(Simulator, seed, plt):
"""Test that WhiteSignal is continuous over multiple periods."""
t = 1.
high = 10
rms = 0.5
process = WhiteSignal(t, high=high, rms=rms)
with nengo.Network() as model:
u = nengo.Node(process, size_out=1)
up = nengo.Probe(u)
with Simulator(model, seed=seed) as sim:
sim.run(4 * t)
dt = sim.dt
x = sim.data[up]
plt.plot(sim.trange(), x)
# tolerances approximated from derivatives of sine wave of highest freq
safety_factor = 2.
a, f = np.sqrt(2) * rms, (2 * np.pi * high) * dt
assert abs(np.diff(x, axis=0)).max() <= safety_factor * a * f
assert abs(np.diff(x, n=2, axis=0)).max() <= safety_factor**2 * a * f**2
def test_unsupervised(Simulator, learning_rule_type, seed, rng, plt):
n = 200
m = nengo.Network(seed=seed)
with m:
u = nengo.Node(WhiteSignal(0.5, high=5), size_out=2)
a = nengo.Ensemble(n, dimensions=2)
b = nengo.Ensemble(n, dimensions=2)
initial_weights = rng.uniform(
high=1e-3,
size=(a.n_neurons, b.n_neurons))
nengo.Connection(u, a)
conn = nengo.Connection(a.neurons, b.neurons,
transform=initial_weights,
learning_rule_type=learning_rule_type)
inp_p = nengo.Probe(u)
trans_p = nengo.Probe(conn, 'transform', sample_every=0.01)
ap = nengo.Probe(a, synapse=0.03)
up = nengo.Probe(b, synapse=0.03)
sim = Simulator(m, seed=seed+1)
sim.run(0.5)
t = sim.trange()
plt.subplot(2, 1, 1)
plt.plot(t, sim.data[inp_p], label="Input")
plt.plot(t, sim.data[ap], label="Pre")
plt.plot(t, sim.data[up], label="Post")
plt.legend(loc="best", fontsize="x-small")
plt.subplot(2, 1, 2)
plt.plot(sim.trange(dt=0.01), sim.data[trans_p][..., 4])
plt.xlabel("Time (s)")
plt.ylabel("Transform weight")
assert not np.all(sim.data[trans_p][0] == sim.data[trans_p][-1])
def test_whitesignal_rms(Simulator, rms, seed, plt):
t = 1.
d = 500
process = WhiteSignal(t, high=500, rms=rms)
with nengo.Network() as model:
u = nengo.Node(process, size_out=d)
up = nengo.Probe(u)
with Simulator(model, seed=seed) as sim:
sim.run(t)
values = sim.data[up]
freq, val_psd = psd(values, dt=sim.dt)
trange = sim.trange()
plt.subplot(2, 1, 1)
plt.title("First two D of white noise process, rms=%.1f" % rms)
plt.plot(trange, values[:, :2])
plt.xlim(right=trange[-1])
plt.subplot(2, 1, 2)
plt.title("Power spectrum")
plt.plot(freq, val_psd, drawstyle='steps')
assert np.allclose(np.std(values), rms, rtol=0.02)
assert np.allclose(val_psd[1:-1], rms, rtol=0.35)
def test_sampling_shape():
process = WhiteSignal(0.1)
assert process.run_steps(1).shape == (1, 1)
assert process.run_steps(5, d=1).shape == (5, 1)
assert process.run_steps(1, d=2). shape == (1, 2)
def __init__(self, duration, high=5.):
self._whitenoise = WhiteSignal(duration, high=high)
rasterplot(sim.trange(), sim.data[A_spikes], ax)
plt.xlim(0, 1)
plt.xlabel("Time (s)")
plt.ylabel("Neuron")
plt.subplot(1, 3, 3)
plt.plot(sim.trange(), sim.data[input_probe], label="Input Signal")
plt.plot(sim.trange(), sim.data[A_probe], label="Decoded estimate")
plt.legend(loc="best")
plt.xlabel("Time (s)")
plt.xlim(0, 1)
# plt.show()
model = nengo.Network(label="NEF Summary")
with model:
input = nengo.Node(WhiteSignal(1, high=5), size_out=1)
input_probe = nengo.Probe(input)
A = nengo.Ensemble(300, dimensions=1, max_rates=Uniform(80, 100))
nengo.Connection(input, A)
A_spikes = nengo.Probe(A.neurons)
A_probe = nengo.Probe(A, synapse=0.01)
with nengo.Simulator(model) as sim:
sim.run(1)
plt.figure(figsize=(10, 3.5))
plt.subplot(1, 2, 1)
plt.plot(sim.trange(), sim.data[input_probe], label="Input Signal")
plt.plot(sim.trange(), sim.data[A_probe], label="Decoded estimate")
plt.legend(loc="best")
plt.xlabel("Time (s)")
def test_sampling_shape():
process = WhiteSignal(0.1, high=500)
assert process.run_steps(1).shape == (1, 1)
assert process.run_steps(5, d=1).shape == (5, 1)
assert process.run_steps(1, d=2).shape == (1, 2)
#Connecting pre population to post population (communication channel)
conn = nengo.Connection(pre,
post,
function=lambda x: np.random.random(1),
solver=nengo.solvers.LstsqL2(weights=True))
#Adding the learning rule to the connection
conn.learning_rule_type = {
'my_pes': nengo.PES(learning_rate=1e-3),
'my_bcm': nengo.BCM()
}
#Error connections don't impart current
error_conn = nengo.Connection(error, conn.learning_rule['my_pes'])
#Providing input to the model
input = nengo.Node(WhiteSignal(30, high=10)) # RMS = 0.5 by default
# Connecting input to the pre ensemble
nengo.Connection(input, pre, synapse=0.02)
#function to inhibit the error population after 25 seconds
def inhib(t):
return 2.0 if t > 15.0 else 0.0
#Connecting inhibit population to error population
inhibit = nengo.Node(inhib)
nengo.Connection(inhibit,
error.neurons,
transform=[[-1]] * error.n_neurons,
synapse=0.01)
def LearningModel(neurons, dimensions, learning_rule, function_to_learn,
convolve, seed):
global decoded
with nengo.Network() as model:
nengo_dl.configure_settings(stateful=False)
model.inp = nengo.Node(
# WhiteNoise( dist=Gaussian( 0, 0.05 ), seed=seed ),
WhiteSignal(sim_time, high=5, seed=seed),
size_out=dimensions[0])
model.pre = nengo.Ensemble(neurons[0],
dimensions=dimensions[0],
seed=seed)
model.post = nengo.Ensemble(neurons[1],
dimensions=dimensions[1],
seed=seed)
model.ground_truth = nengo.Ensemble(neurons[2],
dimensions=dimensions[2],
seed=seed)
nengo.Connection(model.inp, model.pre)
if convolve:
model.conv = nengo.networks.CircularConvolution(neurons[4],
dimensions[4],
seed=seed)
nengo.Connection(model.inp[:int(dimensions[0] / 2)],
model.conv.input_a,
synapse=None)
nengo.Connection(model.inp[int(dimensions[0] / 2):],
model.conv.input_b,
synapse=None)
nengo.Connection(model.conv.output,
model.ground_truth,
synapse=None)
else:
nengo.Connection(model.inp,
model.ground_truth,
function=function_to_learn,
synapse=None)
if learning_rule:
model.error = nengo.Ensemble(neurons[3],
dimensions=dimensions[3],
seed=seed)
if isinstance(learning_rule,
mPES) or (isinstance(learning_rule, PES)
and not decoded):
model.conn = nengo.Connection(model.pre.neurons,
model.post.neurons,
transform=np.random.random(
(model.post.n_neurons,
model.pre.n_neurons)),
learning_rule_type=learning_rule)
else:
model.conn = nengo.Connection(
model.pre,
model.post,
function=lambda x: np.random.random(dimensions[1]),
learning_rule_type=learning_rule)
nengo.Connection(model.error, model.conn.learning_rule)
nengo.Connection(model.post, model.error)
nengo.Connection(model.ground_truth, model.error, transform=-1)
class cyclic_inhibit:
def __init__(self, cycle_time):
self.out_inhibit = 0.0
self.cycle_time = cycle_time
def step(self, t):
if t % self.cycle_time == 0:
if self.out_inhibit == 0.0:
self.out_inhibit = 2.0
else:
self.out_inhibit = 0.0
return self.out_inhibit
model.inhib = nengo.Node(cyclic_inhibit(learn_block_time).step)
nengo.Connection(model.inhib,
model.error.neurons,
transform=[[-1]] * model.error.n_neurons)
else:
model.conn = nengo.Connection(model.pre,
model.post,
function=function_to_learn)
# -- probes
model.pre_probe = nengo.Probe(model.pre, synapse=0.01)
model.post_probe = nengo.Probe(model.post, synapse=0.01)
model.ground_truth_probe = nengo.Probe(model.ground_truth,
synapse=0.01)
# function_learning_model.error_probe = nengo.Probe( function_learning_model.error, synapse=0.03 )
return model