def _handle_file(self, filename, config):
root = etree.parse(filename)
start_revision = root.findtext(ns_cfg("startRevision"))
end_revision = root.findtext(ns_cfg("endRevision"))
remove_layers_elems = root.xpath(
"cfg:removeConfiguration/cfg:browseLayers",
namespaces={"cfg": ns_cfg.uri})
add_layers_elems = root.xpath("cfg:addConfiguration/cfg:browseLayers",
namespaces={"cfg": ns_cfg.uri})
add_layers = []
for layers_elem in add_layers_elems:
add_layers.extend(decode_browse_layers(layers_elem))
remove_layers = []
for layers_elem in remove_layers_elems:
remove_layers.extend(decode_browse_layers(layers_elem))
# get the mapcache config xml file path to make it transaction safe
mapcache_config = get_mapcache_seed_config(config)
mapcache_xml_filename = mapcache_config["config_file"]
# transaction safety here
with FileTransaction((mapcache_xml_filename, ), copy=True):
with transaction.commit_on_success():
with transaction.commit_on_success(using="mapcache"):
for browse_layer in add_layers:
if models.BrowseLayer.objects.filter(
id=browse_layer.id).exists():
update_browse_layer(browse_layer, config)
else:
add_browse_layer(browse_layer, config)
for browse_layer in remove_layers:
delete_browse_layer(browse_layer, config=config)
# set the new revision
config = config or get_ngeo_config()
if not config.has_section("config"):
config.add_section("config")
revision = int(safe_get(config, "config", "revision", 0))
config.set("config", "revision", int(end_revision))
write_ngeo_config()
def _handle_file(self, filename, config):
root = etree.parse(filename)
start_revision = root.findtext(ns_cfg("startRevision"))
end_revision = root.findtext(ns_cfg("endRevision"))
remove_layers_elems = root.xpath("cfg:removeConfiguration/cfg:browseLayers", namespaces={"cfg": ns_cfg.uri})
add_layers_elems = root.xpath("cfg:addConfiguration/cfg:browseLayers", namespaces={"cfg": ns_cfg.uri})
add_layers = []
for layers_elem in add_layers_elems:
add_layers.extend(decode_browse_layers(layers_elem))
remove_layers = []
for layers_elem in remove_layers_elems:
remove_layers.extend(decode_browse_layers(layers_elem))
# get the mapcache config xml file path to make it transaction safe
mapcache_config = get_mapcache_seed_config(config)
mapcache_xml_filename = mapcache_config["config_file"]
# transaction safety here
with FileTransaction((mapcache_xml_filename,), copy=True):
with transaction.commit_on_success():
with transaction.commit_on_success(using="mapcache"):
for browse_layer in add_layers:
if models.BrowseLayer.objects.filter(id=browse_layer.id).exists():
update_browse_layer(browse_layer, config)
else:
add_browse_layer(browse_layer, config)
for browse_layer in remove_layers:
delete_browse_layer(browse_layer, config=config)
# set the new revision
config = config or get_ngeo_config()
if not config.has_section("config"):
config.add_section("config")
revision = int(safe_get(config, "config", "revision", 0))
config.set("config", "revision", int(end_revision))
write_ngeo_config()
def _handle_file(self, filename, mode, config):
browse_layers = decode_browse_layers(etree.parse(filename))
for browse_layer in browse_layers:
if mode == "add":
add_browse_layer(browse_layer, config)
elif mode == "update":
update_browse_layer(browse_layer, config)
elif mode == "remove":
delete_browse_layer(browse_layer, config)
def config(request):
try:
status = get_status()
config = get_ngeo_config()
if request.method not in ("PUT", "POST"):
raise Exception("Invalid request method '%s'." % request.method)
if request.method == "POST":
# "setting" new configuration, which means removing the previous one.
action = "set"
else:
action = "update"
root = etree.parse(request)
start_revision = root.findtext(ns_cfg("startRevision"))
end_revision = root.findtext(ns_cfg("endRevision"))
# TODO: check current and last revision
remove_layers_elems = root.xpath("cfg:removeConfiguration/cfg:browseLayers", namespaces={"cfg": ns_cfg.uri})
add_layers_elems = root.xpath("cfg:addConfiguration/cfg:browseLayers", namespaces={"cfg": ns_cfg.uri})
add_layers = []
for layers_elem in add_layers_elems:
add_layers.extend(decode_browse_layers(layers_elem))
remove_layers = []
for layers_elem in remove_layers_elems:
remove_layers.extend(decode_browse_layers(layers_elem))
# get the mapcache config xml file path to make it transaction safe
mapcache_config = get_mapcache_seed_config(config)
mapcache_xml_filename = mapcache_config["config_file"]
# transaction safety here
with FileTransaction((mapcache_xml_filename,), copy=True):
with transaction.commit_on_success():
with transaction.commit_on_success(using="mapcache"):
for browse_layer in add_layers:
if models.BrowseLayer.objects.filter(id=browse_layer.id).exists():
update_browse_layer(browse_layer, config)
else:
add_browse_layer(browse_layer, config)
for browse_layer in remove_layers:
delete_browse_layer(browse_layer, config)
# set the new revision
config = get_ngeo_config()
if not config.has_section("config"):
config.add_section("config")
revision = int(safe_get(config, "config", "revision", 0))
config.set("config", "revision", end_revision)
write_ngeo_config()
# return with the new revision
return HttpResponse('<?xml version="1.0"?>\n'
'<synchronizeConfigurationResponse>%s</synchronizeConfigurationResponse>'
% end_revision
)
except Exception, e:
logger.error("%s: %s" % (type(e).__name__, str(e)))
logger.debug(traceback.format_exc())
return HttpResponse(
'<faultcode>ConfigurationError</faultcode>\n'
'<faultstring>%s</faultstring>' % str(e), status=400
)
def import_package(package_path, ignore_cache, config):
with package.read(package_path) as p:
browse_layer = decode_browse_layers(etree.parse(p.get_browse_layer()))[0]
try:
browse_layer_model = BrowseLayer.objects.get(
browse_type=browse_layer.browse_type
)
except BrowseLayer.DoesNotExist:
raise ImportException("The browse layer specified in the package "
"does not exist on this server.")
# check compliance of configuration of browse layers
check_parameters = [
"id",
"browse_type",
"grid",
"r_band",
"g_band",
"b_band",
"radiometric_interval_min",
"radiometric_interval_max",
]
for check_parameter in check_parameters:
if getattr(browse_layer, check_parameter) != getattr(browse_layer_model, check_parameter):
raise ImportException("The '%s' configuration of the browse "
"layer specified in the package does not "
"match the one of the browse layer on "
"this server. %s %s" % (check_parameter, getattr(browse_layer, check_parameter), getattr(browse_layer_model, check_parameter)))
crs = None
if browse_layer.grid == "urn:ogc:def:wkss:OGC:1.0:GoogleMapsCompatible":
crs = "EPSG:3857"
elif browse_layer.grid == "urn:ogc:def:wkss:OGC:1.0:GoogleCRS84Quad":
crs = "EPSG:4326"
import_cache_levels = []
seed_cache_levels = []
if not p.has_cache() or ignore_cache:
seed_cache_levels.append((browse_layer_model.lowest_map_level,
browse_layer_model.highest_map_level))
else:
if browse_layer_model.lowest_map_level < browse_layer.lowest_map_level:
seed_cache_levels.append((browse_layer_model.lowest_map_level,
browse_layer.lowest_map_level))
if browse_layer_model.highest_map_level > browse_layer.highest_map_level:
seed_cache_levels.append((browse_layer.highest_map_level,
browse_layer_model.highest_map_level))
import_cache_levels.append((max(browse_layer_model.lowest_map_level,
browse_layer.lowest_map_level),
min(browse_layer_model.highest_map_level,
browse_layer.highest_map_level)))
logger.debug("Importing cache levels %s" %import_cache_levels)
logger.debug("Seeding cache levels %s" %seed_cache_levels)
for browse_report_file in p.get_browse_reports():
import_browse_report(p, browse_report_file, browse_layer_model, crs,
seed_cache_levels, import_cache_levels, config)
def config(request):
try:
status = get_status()
config = get_ngeo_config()
if request.method not in ("PUT", "POST"):
raise Exception("Invalid request method '%s'." % request.method)
if request.method == "POST":
# "setting" new configuration, which means removing the previous one.
action = "set"
else:
action = "update"
root = etree.parse(request)
start_revision = root.findtext(ns_cfg("startRevision"))
end_revision = root.findtext(ns_cfg("endRevision"))
# TODO: check current and last revision
remove_layers_elems = root.xpath(
"cfg:removeConfiguration/cfg:browseLayers",
namespaces={"cfg": ns_cfg.uri})
add_layers_elems = root.xpath("cfg:addConfiguration/cfg:browseLayers",
namespaces={"cfg": ns_cfg.uri})
add_layers = []
for layers_elem in add_layers_elems:
add_layers.extend(decode_browse_layers(layers_elem))
remove_layers = []
for layers_elem in remove_layers_elems:
remove_layers.extend(decode_browse_layers(layers_elem))
# get the mapcache config xml file path to make it transaction safe
mapcache_config = get_mapcache_seed_config(config)
mapcache_xml_filename = mapcache_config["config_file"]
# transaction safety here
with FileTransaction((mapcache_xml_filename, ), copy=True):
with transaction.commit_on_success():
with transaction.commit_on_success(using="mapcache"):
for browse_layer in add_layers:
if models.BrowseLayer.objects.filter(
id=browse_layer.id).exists():
update_browse_layer(browse_layer, config)
else:
add_browse_layer(browse_layer, config)
for browse_layer in remove_layers:
delete_browse_layer(browse_layer, config=config)
# set the new revision
config = get_ngeo_config()
if not config.has_section("config"):
config.add_section("config")
revision = int(safe_get(config, "config", "revision", 0))
config.set("config", "revision", int(end_revision))
write_ngeo_config()
# return with the new revision
return HttpResponse(
'<?xml version="1.0"?>\n'
'<synchronizeConfigurationResponse>%s</synchronizeConfigurationResponse>'
% end_revision)
except Exception, e:
logger.error("%s: %s" % (type(e).__name__, str(e)))
logger.debug(traceback.format_exc())
return HttpResponse('<faultcode>ConfigurationError</faultcode>\n'
'<faultstring>%s</faultstring>' % str(e),
status=400)
def import_package(package_path, ignore_cache, config):
with package.read(package_path) as p:
browse_layer = decode_browse_layers(etree.parse(
p.get_browse_layer()))[0]
try:
browse_layer_model = BrowseLayer.objects.get(
browse_type=browse_layer.browse_type)
except BrowseLayer.DoesNotExist:
raise ImportException("The browse layer specified in the package "
"does not exist on this server.")
# check compliance of configuration of browse layers
check_parameters = [
"id",
"browse_type",
"grid",
"r_band",
"g_band",
"b_band",
"radiometric_interval_min",
"radiometric_interval_max",
]
for check_parameter in check_parameters:
if getattr(browse_layer, check_parameter) != getattr(
browse_layer_model, check_parameter):
raise ImportException(
"The '%s' configuration of the browse "
"layer specified in the package does not "
"match the one of the browse layer on "
"this server. %s %s" %
(check_parameter, getattr(browse_layer, check_parameter),
getattr(browse_layer_model, check_parameter)))
crs = None
if browse_layer.grid == "urn:ogc:def:wkss:OGC:1.0:GoogleMapsCompatible":
crs = "EPSG:3857"
elif browse_layer.grid == "urn:ogc:def:wkss:OGC:1.0:GoogleCRS84Quad":
crs = "EPSG:4326"
import_cache_levels = []
seed_cache_levels = []
if not p.has_cache() or ignore_cache:
seed_cache_levels.append((browse_layer_model.lowest_map_level,
browse_layer_model.highest_map_level))
else:
if browse_layer_model.lowest_map_level < browse_layer.lowest_map_level:
seed_cache_levels.append((browse_layer_model.lowest_map_level,
browse_layer.lowest_map_level))
if browse_layer_model.highest_map_level > browse_layer.highest_map_level:
seed_cache_levels.append(
(browse_layer.highest_map_level,
browse_layer_model.highest_map_level))
import_cache_levels.append(
(max(browse_layer_model.lowest_map_level,
browse_layer.lowest_map_level),
min(browse_layer_model.highest_map_level,
browse_layer.highest_map_level)))
logger.debug("Importing cache levels %s" % import_cache_levels)
logger.debug("Seeding cache levels %s" % seed_cache_levels)
for browse_report_file in p.get_browse_reports():
import_browse_report(p, browse_report_file, browse_layer_model,
crs, seed_cache_levels, import_cache_levels,
config)
