def shape(self):
path = QPainterPath()
x0, x1, h = 20, 15, 150
path.addPolygon(QPolygonF([QPointF(-x0, 0), QPointF(x0, 0),
QPointF(x1, -h), QPointF(-x1, -h)]))
path.closeSubpath()
return path
def paintEvent(self, event):
w, h = self.width * self._scale, self.height * self._scale
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
painter.setPen(QColor('black'))
painter.setBrush(_white)
painter.drawRect(1, 1, w, h)
# determine positions
beam = QPolygonF([QPointF(4, 5)])
i = 0
for k in [
'nok0', 'shutter_gamma', 'nok2', 'nok3', 'nok4', 'nok5a',
'nok5b', 'nok6', 'nok7', 'nok8'
]:
v = self.values[k]
if isinstance(v, (tuple, readonlylist)):
x, y = v # pylint: disable=W0633
elif isinstance(v, int):
x, y = 0, v
else:
raise Exception('%r' % type(v))
p = self._calculatePoint(i, x, y)
beam.append(QPointF(p[0], p[1]))
i += 1
x, y = self.values['nok8']
p = self._calculatePoint(i + 1, x, y)
painter.setPen(beambackgroundpen)
painter.drawPolyline(beam)
# draw beam
painter.setPen(beampen)
painter.drawPolyline(beam)
def shape(self):
path = QPainterPath()
y0, y1, _l = 12, 2, 250
path.addPolygon(
QPolygonF([
QPointF(0, -y0),
QPointF(0, y0),
QPointF(_l, y0),
QPointF(_l, -y1)
]))
path.closeSubpath()
return path
def __init__(self, x, y, size=20, parent=None, scene=None):
if parent:
self._color = parent._color
TableBase.__init__(self, x, y, size, parent, scene)
if not self._pencolor:
self._pencolor = QColor('#666666')
self._pen = QPen(self._pencolor, 1)
self._pen.setBrush(QBrush(self._pencolor))
sz = size / 3
self._polygon = QGraphicsRectItem(
QRectF(-QPointF(sz, sz), QPointF(sz, sz)), self)
self._polygon.setBrush(QBrush(self._pencolor))
self._l1 = QGraphicsLineItem(-size, 0, size, 0, self)
self._l1.setPen(self._pen)
self._l2 = QGraphicsLineItem(0, -size, 0, size, self)
self._l2.setPen(self._pen)
def shape(self):
aoffs = 5 # additional angle for the inner arc
path = QPainterPath()
# draw inner circle of the detector box
path.arcMoveTo(self.circle1, self.startAngle - aoffs)
path.arcTo(self.circle1, self.startAngle - aoffs,
self.spanAngle + 2 * aoffs)
# draw outer circle of the detector box
path.arcMoveTo(self.circle2, self.startAngle)
path.arcTo(self.circle2, self.startAngle, self.spanAngle)
# calculate left inner point of the box
tmpLine = QLineF(QPointF(0, 0), QPointF(-self.radius1, 0))
tmpLine.setAngle(tmpLine.angle() + aoffs)
# draw left line
path.addPolygon(QPolygonF([tmpLine.p2(),
QPointF(-self.radius2, 0)]))
# calculate right inner point of the box
tmpLine = QLineF(QPointF(0, 0), QPointF(-self.radius1, 0))
tmpLine.setAngle(self.startAngle - aoffs)
# calculate right outer point of the box
line2 = QLineF(QPointF(0, 0), QPointF(-self.radius2, 0))
line2.setAngle(self.startAngle)
# draw right line of the box
path.addPolygon(QPolygonF([tmpLine.p2(), line2.p2()]))
return path
def __init__(self, x, y, size=20, parent=None, scene=None):
TableBase.__init__(self, x, y, size, parent, scene)
self._halowidth = max(size / 4, 10)
self._halo = Halo(x, y, size, self._halowidth, self, scene)
self._tuberadius = size / 5
p = QPointF(self._tuberadius, self._tuberadius)
s = QSizeF(2 * self._tuberadius, 2 * self._tuberadius)
self._tube = QGraphicsEllipseItem(QRectF(-p, s), self)
self._tube.setPen(QPen(QColor('black'), 3))
self._tube.setBrush(QBrush(QColor('white')))
self._tube.setZValue(20)
def __init__(self, parent=None, scene=None):
QGraphicsPathItem.__init__(self, parent)
self.setPath(self.shape())
transform = QTransform()
transform.translate(0, -60)
self.setTransform(transform)
self.setTransformOriginPoint(QPointF(0, 50))
if not parent and scene:
scene.addItem(self)
self._halo = TubeHalo(10, self, scene)
self.setState(status.OK)
def __init__(self,
point1=QPointF(0, 0),
point2=QPointF(0, 1),
point3=QPointF(1, 1)):
lineBC = QLineF(point2, point3)
lineAC = QLineF(point1, point3)
lineBA = QLineF(point2, point1)
rad = abs(lineBC.length() / (2 * sin(radians(lineAC.angleTo(lineBA)))))
bisectorBC = QLineF(lineBC.pointAt(0.5), lineBC.p2())
bisectorBC.setAngle(lineBC.normalVector().angle())
bisectorBA = QLineF(lineBA.pointAt(0.5), lineBA.p2())
bisectorBA.setAngle(lineBA.normalVector().angle())
center = QPointF()
bisectorBA.intersect(bisectorBC, center)
self.circle = QRectF(center.x() - rad,
center.y() - rad, 2 * rad, 2 * rad)
lineOA = QLineF(center, point1)
lineOB = QLineF(center, point2)
lineOC = QLineF(center, point2)
startAngle = lineOA.angle()
spanAngle = lineOA.angleTo(lineOC)
# Make sure that the span angle covers all three points with the second
# point in the middle
if abs(spanAngle) < abs(lineOA.angleTo(lineOB)) or \
abs(spanAngle) < abs(lineOB.angleTo(lineOC)):
# swap the end point and invert the spanAngle
startAngle = lineOC.angle()
spanAngle = 360 - self.spanAngle
ArcGraphicsItem.__init__(self, center.x(), center.y(), rad, startAngle,
spanAngle)
def setPos(self, x, y=None):
point = x if isinstance(x, QPointF) else QPointF(x, y)
Crystal.setPos(self, point)
def paintEvent(self, event):
s = self.size()
w, h = s.width(), s.height()
# calculate the maximum length if all elements in a line
maxL = self.values['Lms'] + self.values['Lsa'] + self.values['Lad']
# add the size of the Monochromator and detector
scale = min((w / 2 - anaradius) / float(maxL),
(h - monoradius - anaradius) / float(maxL))
painter = QPainter(self)
painter.setRenderHint(QPainter.Antialiasing)
painter.setPen(QColor('black'))
painter.setBrush(_white)
painter.drawRect(0, 0, w, h)
# determine positions
# incoming beam
if self.values['mth'] < 0:
bx, by = 3, h - (2 + monoradius)
else:
bx, by = 3, 2 + monoradius
# monochromator
mx, my = w / 2., by
# sample
L = self.values['Lms'] * scale # length is in mm -- scale down a bit
mttangle = self.values['mtt'] * deg2rad
mttangle_t = self.targets['mtt'] * deg2rad
if self.values['mth'] < 0:
mttangle = -mttangle
mttangle_t = -mttangle_t
sx, sy = mx + L * cos(mttangle), my - L * sin(mttangle)
sx_t, sy_t = mx + L * cos(mttangle_t), my - L * sin(mttangle_t)
# analyzer
L = self.values['Lsa'] * scale # length is in mm -- scale down a bit
sttangle = self.values['stt'] * deg2rad
sttangle_t = self.targets['stt'] * deg2rad
if self.values['sth'] < 0:
sttangle = mttangle - sttangle
sttangle_t = mttangle_t - sttangle_t
else:
sttangle = mttangle + sttangle
sttangle_t = mttangle_t + sttangle_t
ax, ay = sx + L * cos(sttangle), sy - L * sin(sttangle)
ax_t, ay_t = sx_t + L * cos(sttangle_t), sy_t - L * sin(sttangle_t)
# detector
L = self.values['Lad'] * scale # length is in mm -- scale down a bit
attangle = self.values['att'] * deg2rad
attangle_t = self.targets['att'] * deg2rad
if self.values['ath'] < 0:
attangle = sttangle - attangle
attangle_t = sttangle_t - attangle_t
else:
attangle = sttangle + attangle
attangle_t = sttangle_t + attangle_t
dx, dy = ax + L * cos(attangle), ay - L * sin(attangle)
dx_t, dy_t = ax_t + L * cos(attangle_t), ay_t - L * sin(attangle_t)
# draw table "halos"
painter.setPen(nopen)
if self.status['mth'] != OK:
painter.setBrush(statusbrush[self.status['mth']])
painter.drawEllipse(QPoint(mx, my), monoradius + halowidth,
monoradius + halowidth)
elif self.status['mtt'] != OK:
painter.setBrush(statusbrush[self.status['mtt']])
painter.drawEllipse(QPoint(mx, my), monoradius + halowidth,
monoradius + halowidth)
if self.status['sth'] != OK:
painter.setBrush(statusbrush[self.status['sth']])
painter.drawEllipse(QPoint(sx, sy), sampleradius + halowidth,
sampleradius + halowidth)
elif self.status['stt'] != OK:
painter.setBrush(statusbrush[self.status['stt']])
painter.drawEllipse(QPoint(sx, sy), sampleradius + halowidth,
sampleradius + halowidth)
if self.status['ath'] != OK:
painter.setBrush(statusbrush[self.status['ath']])
painter.drawEllipse(QPoint(ax, ay), anaradius + halowidth,
anaradius + halowidth)
elif self.status['att'] != OK:
painter.setBrush(statusbrush[self.status['att']])
painter.drawEllipse(QPoint(ax, ay), anaradius + halowidth,
anaradius + halowidth)
# draw table targets
painter.setPen(targetpen)
painter.setBrush(_nobrush)
painter.drawEllipse(QPoint(sx_t, sy_t), sampleradius - .5,
sampleradius - .5)
painter.drawEllipse(QPoint(ax_t, ay_t), anaradius - .5, anaradius - .5)
painter.drawEllipse(QPoint(dx_t, dy_t), detradius - .5, detradius - .5)
# draw the tables
painter.setPen(defaultpen)
painter.setBrush(monotablebrush)
painter.drawEllipse(QPoint(mx, my), monoradius, monoradius)
painter.setBrush(sampletablebrush)
painter.drawEllipse(QPoint(sx, sy), sampleradius, sampleradius)
painter.setBrush(anatablebrush)
painter.drawEllipse(QPoint(ax, ay), anaradius, anaradius)
painter.setBrush(dettablebrush)
painter.drawEllipse(QPoint(dx, dy), detradius, detradius)
painter.setBrush(_white)
painter.setPen(nopen)
painter.drawEllipse(QPoint(mx, my), monoradius / 2, monoradius / 2)
# painter.drawEllipse(QPoint(sx, sy), 20, 20)
painter.drawEllipse(QPoint(ax, ay), anaradius / 2, anaradius / 2)
# painter.drawEllipse(QPoint(dx, dy), 20, 20)
beam = QPolygonF([
QPointF(bx, by),
QPointF(mx, my),
QPointF(sx, sy),
QPointF(ax, ay),
QPointF(dx, dy)
])
painter.setPen(beambackgroundpen)
painter.drawPolyline(beam)
# draw mono crystals
painter.setPen(monopen)
mthangle = -self.values['mth'] * deg2rad
painter.drawLine(mx + 10 * cos(mthangle), my - 10 * sin(mthangle),
mx - 10 * cos(mthangle), my + 10 * sin(mthangle))
# draw ana crystals
athangle = -self.values['ath'] * deg2rad
alpha = athangle + sttangle
# TODO if the angle is too small then it could be that the ath value
# must be turned by 90 deg (PANDA: chair setup) ??
if attangle < 0 and alpha < attangle:
alpha += pi_2
painter.drawLine(ax + 10 * cos(alpha), ay - 10 * sin(alpha),
ax - 10 * cos(alpha), ay + 10 * sin(alpha))
# draw sample
painter.setPen(samplepen)
painter.setBrush(samplebrush)
sthangle = self.values['sth'] * deg2rad
alpha = sthangle + mttangle + pi_4
# painter.drawRect(sx - 5, sy - 5, 10, 10)
sz = 10
painter.drawPolygon(
QPolygonF([
QPointF(sx + sz * cos(alpha), sy - sz * sin(alpha)),
QPointF(sx + sz * cos(alpha + pi_2),
sy - sz * sin(alpha + pi_2)),
QPointF(sx - sz * cos(alpha), sy + sz * sin(alpha)),
QPointF(sx - sz * cos(alpha + pi_2),
sy + sz * sin(alpha + pi_2)),
QPointF(sx + sz * cos(alpha), sy - sz * sin(alpha))
]))
painter.setPen(samplecoordpen)
sr = sampleradius
for angle in [alpha - pi_4, alpha - 3 * pi_4]:
painter.drawLine(sx - sr * cos(angle), sy + sr * sin(angle),
sx + sr * cos(angle), sy - sr * sin(angle))
# draw detector
painter.setPen(monopen)
painter.setBrush(_white)
painter.drawEllipse(QPoint(dx, dy), 4, 4)
# draw beam
painter.setPen(beampen)
painter.drawPolyline(beam)
def setPos(self, x, y=None):
point = x if isinstance(x, QPointF) else QPointF(x, y)
QGraphicsItemGroup.setPos(self, point)