def go_plan():
ret = (yield from bps.abs_set(pgm.fly.fly_start, 1))
st = StatusBase()
enum_map = pgm.fly.scan_status.describe()[
pgm.fly.scan_status.name]['enum_strs']
def _done_cb(value, old_value, **kwargs):
print(f'Old value {old_value} -> new value {value}')
print(
f'Old value type {type(old_value)} -> new value {type(value)}')
try:
old_value = enum_map[int(old_value)]
except (TypeError, ValueError):
...
try:
value = enum_map[int(value)]
except (TypeError, ValueError):
...
if old_value != value and value == 'Ready':
st._finished()
pgm.fly.scan_status.clear_sub(_done_cb)
if ret is not None:
pgm.fly.scan_status.subscribe(_done_cb, run=False)
else:
st._finished()
print('SIM MODE')
return st
def _start_motion_thread(self, value, **kwargs):
self._status = StatusBase()
self._status_ready_event.set()
if value == 'Unknown':
self._status.set_exception(
RuntimeError('Unknown not a valid target state'))
else:
td = threading.Thread(target=self._motion_thread)
td.start()
def kickoff(): # plan for moving
st = StatusBase()
# move once every second for 2 min
for i in range(24): # 24*5 = 120
for loc in np.linspace(-delta / 2, delta / 2, 5): # 5s,
RE.loop.call_later(1, lambda v=loc: motor.set(v))
st._finished()
return st
def test_pardon_failures(RE):
from ophyd import StatusBase
st = StatusBase()
class Dummy:
name = 'dummy'
def set(self, val):
return st
dummy = Dummy()
RE([Msg('set', dummy, 1)])
st._finished(success=False)
RE([Msg('null')])
def test_pardon_failures(RE):
from ophyd import StatusBase
st = StatusBase()
class Dummy:
name = 'dummy'
def set(self, val):
return st
dummy = Dummy()
RE([Msg('set', dummy, 1)])
st._finished(success=False)
RE([Msg('null')])
def wiggle_plan(dets, motor, delta, *, md=None):
'''
dets, a list of detectors to read, must have det.cam.acquire_time attribute
delta, relative range to wiggle
move through range in 5 step
'''
original_pos = motor.position()
st = StatusBase()
def kickoff(): # plan for moving
yield Msg('null') # ???
# move once every second for 2 min
for i in range(24): # 24*5 = 120
for loc in np.linspace(-delta/2, delta/2, 5): # 5s,
RE.loop.call_later(1, lambda v=loc: motor.set(v))
return st
def inner_plan():
yield from bps.trigger_and_read(dets)
def clean_up():
yield from bps.mv(motor, original_pos)
timeout = dets[0].cam.acquire_time.value
rp = bp.ramp_plan(kickoff(), motor, inner_plan,
timeout=timeout,
md=md)
return (yield from bpp.finalize_wrapper(rp, clean_up()))
class ExampleComboPositioner(Device, PositionerBase):
"""
A rewrite of ExamplePositioner that shows off the combobox.
LCLS uses a few "positioner" objects that move to named strings
instead of floating point positions, and this facilitates that
behavior.
"""
user_readback = Cpt(Signal, value='OUT', kind='hinted')
user_setpoint = Cpt(Signal, value='Unknown')
motor_is_moving = Cpt(Signal, value=False)
stop = None
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self._status = None
self._status_ready_event = threading.Event()
enums = ('Unknown', 'OUT', 'TARGET1', 'TARGET2')
self.user_readback.enum_strs = enums
self.user_setpoint.enum_strs = enums
def set(self, position):
self._status_ready_event = threading.Event()
self.user_setpoint.put(position)
self._status_ready_event.wait()
return self._status
@user_setpoint.sub_value
def _start_motion_thread(self, value, **kwargs):
self._status = StatusBase()
self._status_ready_event.set()
if value == 'Unknown':
self._status.set_exception(
RuntimeError('Unknown not a valid target state'))
else:
td = threading.Thread(target=self._motion_thread)
td.start()
def _motion_thread(self):
self.motor_is_moving.put(True)
self.user_readback.put('Unknown')
time.sleep(3)
self.user_readback.put(self.user_setpoint.get())
self.motor_is_moving.put(False)
self._status.set_finished()
def kickoff():
# This process should take a total of 5 seconds, but it will be
# interrupted after 0.1 seconds via the timeout keyword passed to
# ramp_plan below.
yield Msg('null')
for j in range(100):
RE.loop.call_later(.05 * j, lambda j=j: mot.set(j))
return StatusBase()
def go_plan():
ret = (yield from bps.abs_set(pgm.fly.fly_start, 1))
st = StatusBase()
enum_map = pgm.fly.scan_status.describe()[pgm.fly.scan_status.name]['enum_strs']
def _done_cb(value, old_value, **kwargs):
old_value = enum_map[int(old_value)]
value = enum_map[int(value)]
if old_value != value and value == 'Ready':
st._finished()
pgm.fly.scan_status.clear_sub(_done_cb)
if ret is not None:
pgm.fly.scan_status.subscribe(_done_cb, run=False)
else:
st._finished()
print('SIM MODE')
return st
def go_plan():
ret = (yield from bps.abs_set(pgm.fly.fly_start, 1))
st = StatusBase()
enum_map = pgm.fly.scan_status.describe()[
pgm.fly.scan_status.name]['enum_strs']
def _done_cb(value, old_value, **kwargs):
old_value = enum_map[int(old_value)]
value = enum_map[int(value)]
if old_value != value and value == 'Ready':
st._finished()
pgm.fly.scan_status.clear_sub(_done_cb)
if ret is not None:
pgm.fly.scan_status.subscribe(_done_cb, run=False)
else:
st._finished()
print('SIM MODE')
return st
def test_ramp(RE):
from ophyd.positioner import SoftPositioner
from ophyd import StatusBase
from ophyd.sim import SynGauss
tt = SoftPositioner(name='mot')
tt.set(0)
dd = SynGauss('det', tt, 'mot', 0, 3)
st = StatusBase()
def kickoff():
yield Msg('null')
for j, v in enumerate(np.linspace(-5, 5, 10)):
RE.loop.call_later(.1 * j, lambda v=v: tt.set(v))
RE.loop.call_later(1.2, st._finished)
return st
def inner_plan():
yield from trigger_and_read([dd])
g = ramp_plan(kickoff(), tt, inner_plan, period=0.08)
db = DocCollector()
RE.subscribe(db.insert)
rs = RE(g)
if RE.call_returns_result:
uid = rs.run_start_uids[0]
else:
uid = rs[0]
assert db.start[0]['uid'] == uid
assert len(db.descriptor[uid]) == 2
descs = {d['name']: d for d in db.descriptor[uid]}
assert set(descs) == set(['primary', 'mot_monitor'])
primary_events = db.event[descs['primary']['uid']]
assert len(primary_events) > 11
monitor_events = db.event[descs['mot_monitor']['uid']]
# the 10 from the updates, 1 from 'run at subscription time'
assert len(monitor_events) == 11
def test_ramp(RE, db):
from ophyd.positioner import SoftPositioner
from ophyd import StatusBase
from bluesky.examples import SynGauss
tt = SoftPositioner(name='mot')
tt.set(0)
dd = SynGauss('det', tt, 'mot', 0, 3)
st = StatusBase()
def kickoff():
yield Msg('null')
for j, v in enumerate(np.linspace(-5, 5, 10)):
RE.loop.call_later(.1 * j, lambda v=v: tt.set(v))
RE.loop.call_later(1.2, st._finished)
return st
def inner_plan():
yield from trigger_and_read([dd])
g = ramp_plan(kickoff(), tt, inner_plan, period=0.08)
RE.subscribe('all', db.mds.insert)
RE.msg_hook = MsgCollector()
rs_uid, = RE(g)
hdr = db[-1]
assert hdr.start.uid == rs_uid
assert len(hdr.descriptors) == 2
assert set([d['name'] for d in hdr.descriptors]) == \
set(['primary', 'mot_monitor'])
primary_events = list(db.get_events(hdr, stream_name='primary'))
assert len(primary_events) > 11
monitor_events = list(db.get_events(hdr, stream_name='mot_monitor'))
assert len(monitor_events) == 10
def _start_motion_thread(self, value, **kwargs):
self.stop(success=True)
self._status = StatusBase()
self._status_ready_event.set()
td = threading.Thread(target=self._motion_thread)
td.start()
class ExamplePositioner(Device, PositionerBase):
"""
An example in-software positioner that works with the positioner widget.
This behaves more or less like you'd expect a real motor to behave.
"""
user_readback = Cpt(Signal,
value=0.0,
kind='hinted',
metadata={'precision': 3})
user_setpoint = Cpt(Signal, value=0.0)
low_limit_switch = Cpt(Signal, value=False)
high_limit_switch = Cpt(Signal, value=False)
low_limit_travel = Cpt(Signal, value=-10.0)
high_limit_travel = Cpt(Signal, value=10.0)
velocity = Cpt(Signal, value=1.0)
acceleration = Cpt(Signal, value=1.0)
motor_is_moving = Cpt(Signal, value=False)
error_message = Cpt(Signal, value='')
cause_error = Cpt(Signal, value='')
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self._status = None
self._status_ready_event = threading.Event()
def set(self, position):
self._status_ready_event.clear()
self.user_setpoint.put(position)
self._status_ready_event.wait()
return self._status
@user_setpoint.sub_value
def _start_motion_thread(self, value, **kwargs):
self.stop(success=True)
self._status = StatusBase()
self._status_ready_event.set()
td = threading.Thread(target=self._motion_thread)
td.start()
def _motion_thread(self):
self.motor_is_moving.put(True)
while not self._status.done:
self._step_position()
self.motor_is_moving.put(False)
def _step_position(self):
time_step = 0.1
noise_factor = 0.1
noise = noise_factor * random.uniform(-1, 1)
dist = self.user_setpoint.get() - self.user_readback.get()
velo = self.velocity.get() * (1 + noise)
step = velo * time_step
if abs(dist) < step:
self.user_readback.put(self.user_setpoint.get() + noise / 10)
self._status.set_finished()
elif dist > 0:
self.user_readback.put(self.user_readback.get() + step)
elif dist < 0:
self.user_readback.put(self.user_readback.get() - step)
time.sleep(time_step)
def stop(self, success=False):
if self._status is not None and not self._status.done:
if success:
self._status.set_finished()
else:
self._status.set_exception(RuntimeError('Move Interrupted'))
@user_readback.sub_value
def _update_position(self, value, **kwargs):
if self.low_limit_travel.get() or self.high_limit_travel.get():
bot_hit = value <= self.low_limit_travel.get()
top_hit = value >= self.high_limit_travel.get()
self.low_limit_switch.put(bot_hit)
self.high_limit_switch.put(top_hit)
@low_limit_switch.sub_value
@high_limit_switch.sub_value
def _limit_hit(self, value, **kwargs):
if value:
self.stop(success=True)
def clear_error(self):
self.error_message.put('')
@cause_error.sub_value
def _cause_error(self, value, **kwargs):
self.error_message.put(value)
def set(self, inp):
st = StatusBase()
RE.loop.call_later(1, lambda: st._finished(success=False))
return st
def trigger(self):
st = StatusBase()
fresh_RE.loop.call_later(1, lambda: st._finished(success=False))
return st
def trigger(self):
st = StatusBase()
fresh_RE.loop.call_later(1, lambda: st._finished(success=False))
return st
def kickoff():
yield Msg('null')
for j in range(5):
RE.loop.call_later(.05 * j, lambda j=j: mot.set(j))
return StatusBase()
def set(self, val):
st = StatusBase()
st._finished(success=False)
return st
def trigger(self):
st = StatusBase()
threading.Timer(1, st._finished,
kwargs=dict(success=False)).start()
return st
def kickoff():
st = StatusBase()
for i in range(20):
yield from mvr(motor, -1)
yield from mvr(motor, 1)
return st
from bluesky.plans import ramp_plan
from bluesky.plan_stubs import trigger_and_read
from bluesky import Msg
from bluesky.utils import RampFail
import numpy as np
import time
from ophyd.positioner import SoftPositioner
from ophyd import StatusBase
from ophyd.sim import SynGauss
tt = SoftPositioner(name='mot')
tt.set(0)
dd = SynGauss('det', tt, 'mot', 0, 3)
st = StatusBase()
def kickoff():
yield Msg('null')
for j, v in enumerate(np.linspace(-2, 2, 10)):
RE.loop.call_later(.1 * j, lambda v=v: tt.set(v))
RE.loop.call_later(1.2, st._finished)
return st
def inner_plan():
print(tt.position)
yield from trigger_and_read([dd])
def set(self, val):
st = StatusBase()
st._finished(success=False)
return st
def set(self, inp):
st = StatusBase()
RE.loop.call_later(1, lambda: st._finished(success=False))
return st
