def execute(self, app):
#print("go!")
blocks = []
for bid in app.editor.getSelectedBlocks():
if len(app.gcode.toPath(bid)) < 1: continue
path = app.gcode.toPath(bid)[0]
x,y = path.center()
eblock = Block("center of "+app.gcode[bid].name())
eblock.append("G0 x"+str(x)+" y"+str(y))
eblock.append("G1 Z0 F200")
eblock.append("G0 Z10")
blocks.append(eblock)
#active = app.activeBlock()
#if active == 0: active+=1
active=-1 #add to end
app.gcode.insBlocks(active, blocks, "Center created") #<<< insert blocks over active block in the editor
app.refresh() #<<< refresh editor
app.setStatus(_("Generated: Center")) #<<< feed back result
def execute(self, app):
# info =xnew,ynew,znew,dxy,dz
xscale = self["xscale"]
if xscale == "": xscale = 1
yscale = self["yscale"]
if yscale == "": yscale = 1
zscale = self["zscale"]
if zscale == "": zscale = 1
surface = CNC.vars["surface"]
if zscale > 0:
surface *= zscale
feed = self["feed"]
zfeed = CNC.vars["cutfeedz"]
rpm = self["rpm"]
if self["zfeed"]:
zfeed = self["zfeed"]
#zup = self["zup"]
centered = self["centered"]
# zbeforecontact=surface+CNC.vars["zretract"]
# hardcrust = surface - CNC.vars["hardcrust"]
# feedbeforecontact = CNC.vars["feedbeforecontact"]/100.0
# hardcrustfeed = CNC.vars["hardcrustfeed"]/100.0
# Get selected blocks from editor
selBlocks = app.editor.getSelectedBlocks()
if not selBlocks:
app.setStatus(_("Scaling abort: Please select some path"))
return
elements = len(app.editor.getSelectedBlocks())
print("elements", elements)
for bid in app.editor.getSelectedBlocks():
if len(app.gcode.toPath(bid)) < 1: continue
path = app.gcode.toPath(bid)[0]
if centered:
center = path.center()
else:
center = 0, 0
print("center", center[0], center[1])
# if elements>=2:
# center=0,0
#Get all segments from gcode
allSegments = self.extractAllSegments(app, selBlocks)[0]
name_block = self.extractAllSegments(app, selBlocks)[1]
# num_block = self.extractAllSegments(app,selBlocks)[2]
#Create holes locations
all_blocks = []
for bidSegment in allSegments:
if len(bidSegment) == 0:
continue
# all_blocks = []
n = self["name"]
# if not n or n=="default": n="Trochoidal_3D"
if elements > 1:
n = "scale "
else:
if centered:
n = "center scale " + str(name_block)
else:
n = "scale " + str(name_block)
bid_block = Block(n)
for idx, segm in enumerate(bidSegment):
# if idx >= 0:
# bid_block.append("(idx "+str(idx)+" -------------- )")
info = self.scaling(segm, center, xscale, yscale, zscale)
if idx == 0:
bid_block.append("(---- Scale (x " + str(xscale) +
" : 1.0),(y " + str(yscale) +
" : 1.0),(z " + str(zscale) +
" : 1.0) ---- )")
bid_block.append("(center " + str(center[0]) + " ," +
str(center[1]) + " )")
bid_block.append("M03")
bid_block.append("S " + str(rpm))
bid_block.append(CNC.zsafe())
bid_block.append("F " + str(zfeed))
bid_block.append("g0 x " + str(info[0]) + " y " +
str(info[1]))
currentfeed = oldfeed = zfeed
else:
# if B[5]>=0: #<< zsign
# currentfeed=feed
# else:
#relationship
if info[4] >= 0:
currentfeed = feed
else:
rel = info[3] / (info[3] + abs(info[4]))
currentfeed = int(rel * feed + (1 - rel) * zfeed)
if segm[0][2] > surface and segm[1][2] >= surface:
bid_block.append("g0 x " + str(info[0]) + " y " +
str(info[1]) + " z " + str(info[2]))
else:
if currentfeed != oldfeed:
bid_block.append("F " + str(currentfeed))
bid_block.append("g1 x " + str(info[0]) + " y " +
str(info[1]) + " z " + str(info[2]))
oldfeed = currentfeed
bid_block.append(CNC.zsafe(
)) #<<< Move rapid Z axis to the safe height in Stock Material
all_blocks.append(bid_block)
# print "bid", bid_block.name(), bid_block,"*****************"
self.finish_blocks(app, all_blocks, elements)
def execute(self, app):
# info =xnew,ynew,znew,dxy,dz
xscale= self["xscale"]
if xscale=="":xscale=1
yscale= self["yscale"]
if yscale=="":yscale=1
zscale= self["zscale"]
if zscale=="":zscale=1
surface = CNC.vars["surface"]
if zscale>0:
surface*=zscale
feed = self["feed"]
zfeed = CNC.vars["cutfeedz"]
rpm = self["rpm"]
if self["zfeed"]:
zfeed = self["zfeed"]
#zup = self["zup"]
centered = self["centered"]
# zbeforecontact=surface+CNC.vars["zretract"]
# hardcrust = surface - CNC.vars["hardcrust"]
# feedbeforecontact = CNC.vars["feedbeforecontact"]/100.0
# hardcrustfeed = CNC.vars["hardcrustfeed"]/100.0
# Get selected blocks from editor
selBlocks = app.editor.getSelectedBlocks()
if not selBlocks:
app.setStatus(_("Scaling abort: Please select some path"))
return
elements=len(app.editor.getSelectedBlocks())
print("elements",elements)
for bid in app.editor.getSelectedBlocks():
if len(app.gcode.toPath(bid)) < 1: continue
path = app.gcode.toPath(bid)[0]
if centered:
center = path.center()
else:
center=0,0
print ("center",center[0],center[1])
# if elements>=2:
# center=0,0
#Get all segments from gcode
allSegments = self.extractAllSegments(app,selBlocks)[0]
name_block = self.extractAllSegments(app,selBlocks)[1]
# num_block = self.extractAllSegments(app,selBlocks)[2]
#Create holes locations
all_blocks=[]
for bidSegment in allSegments:
if len(bidSegment)==0:
continue
# all_blocks = []
n = self["name"]
# if not n or n=="default": n="Trochoidal_3D"
if elements>1:
n="scale "
else:
if centered:
n="center scale "+str(name_block)
else:
n="scale "+str(name_block)
bid_block = Block(n)
for idx, segm in enumerate(bidSegment):
# if idx >= 0:
# bid_block.append("(idx "+str(idx)+" -------------- )")
info=self.scaling(segm,center,xscale,yscale,zscale)
if idx == 0:
bid_block.append("(---- Scale (x "+str(xscale)+" : 1.0),(y "+str(yscale)+" : 1.0),(z "+str(zscale)+" : 1.0) ---- )")
bid_block.append("(center "+str(center[0])+" ,"+str(center[1])+" )")
bid_block.append("M03")
bid_block.append("S "+str(rpm))
bid_block.append(CNC.zsafe())
bid_block.append("F "+str(zfeed))
bid_block.append("g0 x "+str(info[0])+" y "+str(info[1]))
currentfeed=oldfeed=zfeed
else:
# if B[5]>=0: #<< zsign
# currentfeed=feed
# else:
#relationship
if info[4]>=0:
currentfeed=feed
else:
rel=info[3]/(info[3]+abs(info[4]))
currentfeed=int(rel*feed+(1-rel)*zfeed)
if segm[0][2]> surface and segm[1][2]>=surface:
bid_block.append("g0 x "+str(info[0])+" y "+str(info[1])+ " z "+str(info[2]))
else:
if currentfeed!=oldfeed:
bid_block.append("F "+str(currentfeed))
bid_block.append("g1 x "+str(info[0])+" y "+str(info[1])+ " z "+str(info[2]))
oldfeed=currentfeed
bid_block.append(CNC.zsafe()) #<<< Move rapid Z axis to the safe height in Stock Material
all_blocks.append(bid_block)
# print "bid", bid_block.name(), bid_block,"*****************"
self.finish_blocks(app, all_blocks,elements)