def main():
my_shape = paramak.CenterColumnShieldHyperbola(
height=500,
inner_radius=50,
mid_radius=60,
outer_radius=100,
material_tag='center_column_shield_mat')
# makes the openmc neutron source at x,y,z 0, 0, 0 with isotropic
# directions
source = openmc.Source()
source.space = openmc.stats.Point((0, 0, 0))
source.energy = openmc.stats.Discrete([14e6], [1])
source.angle = openmc.stats.Isotropic()
# converts the geometry into a neutronics geometry
my_model = paramak.NeutronicsModel(
geometry=my_shape,
source=source,
materials={'center_column_shield_mat': 'Be'},
cell_tallies=['(n,Xa)', '(n,Xt)', '(n,Xp)'],
mesh_tally_3d=['(n,Xa)', '(n,Xt)', '(n,Xp)'],
mesh_tally_2d=['(n,Xa)', '(n,Xt)', '(n,Xp)'],
simulation_batches=10,
simulation_particles_per_batch=200)
# performs an openmc simulation on the model
my_model.simulate(method='pymoab')
# this extracts the values from the results dictionary
print(my_model.results)
def test_CenterColumnShieldHyperbola_creation(self):
"""creates a CenterColumnShieldHyperbola object and checks a solid is created"""
test_shape = paramak.CenterColumnShieldHyperbola(
height=100, inner_radius=50, mid_radius=80, outer_radius=100
)
assert test_shape.solid is not None
assert test_shape.volume > 1000
def make_model_and_simulate():
simulation_values = []
for mid_radius in [60, 70, 80]:
# makes the component with a few different size mid radius values
my_shape = paramak.CenterColumnShieldHyperbola(
height=500,
inner_radius=50,
mid_radius=mid_radius,
outer_radius=100,
material_tag='center_column_shield_mat'
)
my_shape.export_stp('my_shape' + str(mid_radius) + '.stp')
# makes the openmc neutron source at x,y,z 0, 0, 0 with isotropic
# diections
source = openmc.Source()
source.space = openmc.stats.Point((0, 0, 0))
source.angle = openmc.stats.Isotropic()
# converts the geometry into a neutronics geometry
my_model = paramak.NeutronicsModel(
geometry=my_shape,
source=source,
materials={'center_column_shield_mat': 'eurofer'},
cell_tallies=['heating', 'TBR'],
mesh_tally_2d=['heating'],
mesh_tally_3d=['heating'],
simulation_batches=10, # should be increased for more accurate result
simulation_particles_per_batch=10 # settings are low to reduce time required
)
# performs an openmc simulation on the model
my_model.simulate(method='pymoab')
# extracts the heat from the results dictionary
heat = my_model.results['center_column_shield_mat_heating']['Watts']['result']
# adds the heat and the mid radius value to a list
simulation_values.append((mid_radius, heat))
# plots the simualtion results vs the mid_radius used for the simulation
plt.plot(
[i[0] for i in simulation_values],
[i[1] for i in simulation_values],
'-p'
)
# adds labels to the graph
plt.title("heating vs thickness")
plt.xlabel("thickness (cm)")
plt.ylabel("heating (watts)")
plt.savefig('heating_vs_thickness.svg')
plt.show()
def test_CenterColumnShieldHyperbola_creation(self):
"""creates a center column shield using the
CenterColumnShieldHyperbola parametric component
and checks that a cadquery solid is created"""
test_shape = paramak.CenterColumnShieldHyperbola(
height=100, inner_radius=50, mid_radius=80, outer_radius=100
)
assert test_shape.solid is not None
assert test_shape.volume > 1000
def test_construction_with_CenterColumnShieldHyperbola(self):
"""Makes a firstwall with from a CenterColumnShieldHyperbola and checks
the volume is smaller than the shield"""
a = paramak.CenterColumnShieldHyperbola(height=200,
inner_radius=20,
mid_radius=80,
outer_radius=120)
b = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180)
assert a.solid is not None
assert b.solid is not None
assert a.volume > b.volume
def setUp(self):
self.my_shape = paramak.CenterColumnShieldHyperbola(
height=500,
inner_radius=50,
mid_radius=60,
outer_radius=100,
material_tag='center_column_shield_mat')
# makes the openmc neutron source at x,y,z 0, 0, 0 with isotropic
# directions
self.source = openmc.Source()
self.source.space = openmc.stats.Point((0, 0, 0))
self.source.angle = openmc.stats.Isotropic()
def main():
rot_angle = 180
all_components = []
plasma = paramak.Plasma(
# default parameters
rotation_angle=rot_angle,
stp_filename="plasma_shape.stp",
)
all_components.append(plasma)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_outboard_plasma.stp",
)
all_components.append(component)
component = paramak.BlanketCutterStar(height=2000,
width=2000,
distance=100)
all_components.append(component)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=250,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_inboard_plasma.stp",
)
all_components.append(component)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=250,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_plasma.stp",
)
all_components.append(component)
CenterColumnShieldCylinder = paramak.CenterColumnShieldCylinder(
inner_radius=80,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_cylinder.stp",
)
all_components.append(CenterColumnShieldCylinder)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldCylinder,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_cylinder.stp",
)
all_components.append(component)
CenterColumnShieldHyperbola = paramak.CenterColumnShieldHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_hyperbola.stp",
)
all_components.append(CenterColumnShieldHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_hyperbola.stp",
)
all_components.append(component)
CenterColumnShieldCircular = paramak.CenterColumnShieldCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_circular.stp",
)
all_components.append(CenterColumnShieldCircular)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldCircular,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_circular.stp",
)
all_components.append(component)
CenterColumnShieldFlatTopHyperbola = paramak.CenterColumnShieldFlatTopHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_flat_top_hyperbola.stp",
)
all_components.append(CenterColumnShieldFlatTopHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldFlatTopHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename=
"firstwall_from_center_column_shield_flat_top_hyperbola.stp",
)
all_components.append(component)
CenterColumnShieldFlatTopCircular = paramak.CenterColumnShieldFlatTopCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_flat_top_Circular.stp",
)
all_components.append(CenterColumnShieldFlatTopCircular)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldFlatTopCircular,
thickness=50,
rotation_angle=rot_angle,
stp_filename=
"firstwall_from_center_column_shield_flat_top_Circular.stp",
)
all_components.append(component)
CenterColumnShieldPlasmaHyperbola = paramak.CenterColumnShieldPlasmaHyperbola(
inner_radius=150,
mid_offset=50,
edge_offset=40,
height=800,
rotation_angle=rot_angle,
stp_filename="center_column_shield_plasma_hyperbola.stp",
)
all_components.append(CenterColumnShieldPlasmaHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldPlasmaHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_plasma_hyperbola.stp",
)
all_components.append(component)
component = paramak.InnerTfCoilsCircular(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename="inner_tf_coils_circular.stp",
)
all_components.append(component)
component = paramak.InnerTfCoilsFlat(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename="inner_tf_coils_flat.stp",
)
all_components.append(component)
# this makes 4 pf coil cases
pf_coil_set = paramak.PoloidalFieldCoilCaseSet(
heights=[10, 10, 20, 20],
widths=[10, 10, 20, 40],
casing_thicknesses=[5, 5, 10, 10],
center_points=[(100, 100), (100, 150), (50, 200), (50, 50)],
rotation_angle=rot_angle,
stp_filename="pf_coil_case_set.stp")
all_components.append(pf_coil_set)
# this makes 4 pf coils
pf_coil_set = paramak.PoloidalFieldCoilSet(heights=[10, 10, 20, 20],
widths=[10, 10, 20, 40],
center_points=[(100, 100),
(100, 150),
(50, 200),
(50, 50)],
rotation_angle=rot_angle,
stp_filename="pf_coil_set.stp")
all_components.append(pf_coil_set)
# this makes 4 pf coil cases for the 4 pf coils made above
component = paramak.PoloidalFieldCoilCaseSetFC(
pf_coils=pf_coil_set,
casing_thicknesses=[5, 5, 10, 10],
rotation_angle=rot_angle,
stp_filename="pf_coil_cases_set.stp")
all_components.append(component)
# this makes 1 pf coils
pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100),
height=20,
width=20,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil.stp")
all_components.append(pf_coil)
# this makes one PF coil case for the provided pf coil
component = paramak.PoloidalFieldCoilCaseSetFC(
pf_coils=[pf_coil],
casing_thicknesses=[10],
rotation_angle=rot_angle,
stp_filename="pf_coil_cases_set_fc.stp")
all_components.append(component)
component = paramak.PoloidalFieldCoilCaseFC(
pf_coil=pf_coil,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil_case_fc.stp",
)
all_components.append(component)
component = paramak.PoloidalFieldCoilCase(
center_point=(100, 100),
coil_height=20,
coil_width=20,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil_case.stp",
)
all_components.append(component)
component = paramak.BlanketConstantThicknessArcV(
inner_lower_point=(300, -200),
inner_mid_point=(500, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename="blanket_arc_v.stp",
)
all_components.append(component)
component = paramak.BlanketConstantThicknessArcH(
inner_lower_point=(300, -200),
inner_mid_point=(400, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename="blanket_arc_h.stp",
)
all_components.append(component)
component = paramak.ToroidalFieldCoilRectangle(
horizontal_start_point=(100, 700),
vertical_mid_point=(800, 0),
thickness=150,
distance=60,
stp_filename="tf_coil_rectangle.stp",
number_of_coils=1,
)
all_components.append(component)
component = paramak.ToroidalFieldCoilCoatHanger(
horizontal_start_point=(200, 500),
horizontal_length=400,
vertical_mid_point=(700, 50),
vertical_length=500,
thickness=50,
distance=50,
stp_filename="toroidal_field_coil_coat_hanger.stp",
number_of_coils=1,
)
all_components.append(component)
component = paramak.ToroidalFieldCoilTripleArc(
R1=80,
h=200,
radii=(70, 100),
coverages=(60, 60),
thickness=30,
distance=30,
number_of_coils=1,
stp_filename="toroidal_field_coil_triple_arc.stp")
all_components.append(component)
magnet = paramak.ToroidalFieldCoilPrincetonD(
R1=80,
R2=300,
thickness=30,
distance=30,
number_of_coils=1,
stp_filename="toroidal_field_coil_princeton_d.stp")
all_components.append(magnet)
component = paramak.ITERtypeDivertor(
# default parameters
rotation_angle=rot_angle,
stp_filename="ITER_type_divertor.stp",
)
all_components.append(component)
component = paramak.PortCutterRotated(center_point=(450, 0),
polar_coverage_angle=20,
rotation_angle=10,
polar_placement_angle=45,
azimuth_placement_angle=0)
all_components.append(component)
component = paramak.PortCutterRectangular(
distance=3,
z_pos=0,
height=0.2,
width=0.4,
fillet_radius=0.02,
azimuth_placement_angle=[0, 45, 90, 180])
all_components.append(component)
component = paramak.PortCutterCircular(
distance=3,
z_pos=0.25,
radius=0.1,
# azimuth_placement_angle=[0, 45, 90, 180], # TODO: fix issue #548
azimuth_placement_angle=[0, 45, 90],
)
all_components.append(component)
component = paramak.VacuumVessel(height=2,
inner_radius=1,
thickness=0.2,
rotation_angle=270)
all_components.append(component)
component = paramak.CoolantChannelRingStraight(
height=200,
channel_radius=10,
ring_radius=70,
number_of_coolant_channels=8,
workplane="XY",
rotation_axis="Z",
stp_filename="coolant_channel_ring_straight.stp",
)
all_components.append(component)
component = paramak.CoolantChannelRingCurved(
height=200,
channel_radius=10,
ring_radius=70,
mid_offset=-20,
number_of_coolant_channels=8,
workplane="XY",
path_workplane="XZ",
stp_filename="coolant_channel_ring_curved.stp",
force_cross_section=True)
all_components.append(component)
component = paramak.RotatedIsoscelesTriangle(
height=20,
base_length=15,
pivot_angle=0,
pivot_point=(100, 50),
rotation_angle=70,
workplane='XY',
stp_filename='rotated_isosceles_triangle.stp')
all_components.append(component)
component = paramak.RotatedTrapezoid(length_1=10,
length_2=20,
length_3=30,
pivot_angle=0,
pivot_point=(100, 50),
rotation_angle=45,
stp_filename='rotated_trapezoid.stp')
all_components.append(component)
component = paramak.PoloidalSegments(number_of_segments=5,
center_point=(400, 50))
all_components.append(component)
component = paramak.TFCoilCasing(magnet=magnet,
inner_offset=10,
outer_offset=15,
vertical_section_offset=20,
distance=40)
all_components.append(component)
component = paramak.HexagonPin(length_of_side=5,
distance=10,
center_point=(10, 20))
all_components.append(component)
return all_components
def setUp(self):
self.test_shape = paramak.CenterColumnShieldHyperbola(height=600,
inner_radius=100,
mid_radius=150,
outer_radius=200)
import openmc
import paramak
import plotly.graph_objects as go
my_shape = paramak.CenterColumnShieldHyperbola(
height=500,
inner_radius=50,
mid_radius=60,
outer_radius=100,
material_tag='center_column_shield_mat')
# makes the openmc neutron source at x,y,z 0, 0, 0 with isotropic directions
source = openmc.Source()
source.space = openmc.stats.Point((0, 0, 0))
source.energy = openmc.stats.Discrete([14e6], [1])
source.angle = openmc.stats.Isotropic()
# converts the geometry into a neutronics geometry
my_model = paramak.NeutronicsModel(
geometry=my_shape,
source=source,
materials={'center_column_shield_mat': 'Be'},
cell_tallies=['heating', 'flux', 'TBR', 'spectra'],
simulation_batches=10,
simulation_particles_per_batch=200)
# performs an openmc simulation on the model
output_filename = my_model.simulate(method='pymoab')
# this extracts the values from the results dictionary
energy_bins = my_model.results['center_column_shield_mat_photon_spectra'][
def main():
rot_angle = 180
all_components = []
plasma = paramak.Plasma(
# default parameters
rotation_angle=rot_angle,
stp_filename='plasma_shape.stp')
all_components.append(plasma)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_outboard_plasma.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=250,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_inboard_plasma.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=250,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_plasma.stp')
all_components.append(component)
component = paramak.ToroidalFieldCoilCoatHanger(
horizontal_start_point=(200, 500),
horizontal_length=400,
vertical_start_point=(700, 50),
vertical_length=500,
thickness=50,
distance=50,
stp_filename='toroidal_field_coil_coat_hanger.stp',
number_of_coils=5)
all_components.append(component)
component = paramak.CenterColumnShieldCylinder(
inner_radius=80,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_cylinder.stp')
all_components.append(component)
component = paramak.CenterColumnShieldHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_hyperbola.stp')
all_components.append(component)
component = paramak.CenterColumnShieldCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_circular.stp')
all_components.append(component)
component = paramak.CenterColumnShieldFlatTopHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_flat_top_hyperbola.stp')
all_components.append(component)
component = paramak.CenterColumnShieldFlatTopCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_flat_top_Circular.stp')
all_components.append(component)
component = paramak.CenterColumnShieldPlasmaHyperbola(
inner_radius=150,
mid_offset=50,
edge_offset=40,
height=800,
rotation_angle=rot_angle,
stp_filename='center_column_shield_plasma_hyperbola.stp')
all_components.append(component)
#
# component = paramak.DivertorBlock(
# major_radius = 800,
# minor_radius = 400,
# triangularity = 1.2,
# elongation = 0.9,
# thickness = 50,
# offset_from_plasma = 20,
# start
# )
component = paramak.InnerTfCoilsCircular(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename='inner_tf_coils_circular.stp')
all_components.append(component)
component = paramak.InnerTfCoilsFlat(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename='inner_tf_coils_flat.stp')
all_components.append(component)
pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100),
height=20,
width=20,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil.stp')
all_components.append(pf_coil)
component = paramak.PoloidalFieldCoilCaseFC(
pf_coil=pf_coil,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil_case_fc.stp')
all_components.append(component)
component = paramak.PoloidalFieldCoilCase(
center_point=(100, 100),
coil_height=20,
coil_width=20,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil_case.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessArcV(
inner_lower_point=(300, -200),
inner_mid_point=(500, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename='blanket_arc_v.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessArcH(
inner_lower_point=(300, -200),
inner_mid_point=(400, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename='blanket_arc_h.stp')
all_components.append(component)
component = paramak.ToroidalFieldCoilRectangle(
inner_upper_point=(100, 700),
inner_mid_point=(800, 0),
inner_lower_point=(100, -700),
thickness=150,
distance=60,
stp_filename='tf_coil_rectangle.stp',
number_of_coils=6)
all_components.append(component)
component = paramak.ITERtypeDivertor(
# default parameters
rotation_angle=rot_angle,
stp_filename='ITER_type_divertor.stp')
all_components.append(component)
return all_components
