def checkPropagated(looper, txnPoolNodeSet, request, faultyNodes=0):
    nodesSize = len(list(txnPoolNodeSet))

    # noinspection PyIncorrectDocstring
    def g(node: TestNode):
        """
        1. no of propagate received by node must be n -1 with zero
            faulty nodes in system; where n = num of nodes
        2. no of propagate received by node must be greater than
         or equal to f + 1
        """
        actualMsgs = len([x for x in
                          getAllArgs(node, Node.processPropagate)
                          if x['msg'].request[f.REQ_ID.nm] == request.reqId and
                          x['msg'].request[f.IDENTIFIER.nm] == request.identifier and
                          x['msg'].request[OPERATION] == request.operation])

        numOfMsgsWithZFN = nodesSize - 1
        numOfMsgsWithFaults = faultyNodes + 1

        assert msgCountOK(nodesSize,
                          faultyNodes,
                          actualMsgs,
                          numOfMsgsWithZFN,
                          numOfMsgsWithFaults)

    timeout = waits.expectedPropagateTime(len(txnPoolNodeSet))
    funcs = [partial(g, node) for node in txnPoolNodeSet]
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
示例#2
0
def reqAcked1(looper, nodeSet, client1, sent1, faultyNodes):

    numerOfNodes = len(nodeSet)

    # Wait until request received by all nodes
    propTimeout = waits.expectedClientToPoolRequestDeliveryTime(numerOfNodes)
    coros = [
        partial(checkLastClientReqForNode, node, sent1) for node in nodeSet
    ]
    # looper.run(eventuallyAll(*coros,
    #                          totalTimeout=propTimeout,
    #                          acceptableFails=faultyNodes))
    chk_all_funcs(looper,
                  coros,
                  acceptable_fails=faultyNodes,
                  timeout=propTimeout)

    # Wait until sufficient number of acks received
    coros2 = [
        partial(checkReqAck, client1, node, sent1.identifier, sent1.reqId)
        for node in nodeSet
    ]
    ackTimeout = waits.expectedReqAckQuorumTime()
    # looper.run(eventuallyAll(*coros2,
    #                          totalTimeout=ackTimeout,
    #                          acceptableFails=faultyNodes))
    chk_all_funcs(looper,
                  coros2,
                  acceptable_fails=faultyNodes,
                  timeout=ackTimeout)
    return sent1
示例#3
0
def checkPropagated(looper, txnPoolNodeSet, request, faultyNodes=0):
    nodesSize = len(list(txnPoolNodeSet))

    # noinspection PyIncorrectDocstring
    def g(node: TestNode):
        """
        1. no of propagate received by node must be n -1 with zero
            faulty nodes in system; where n = num of nodes
        2. no of propagate received by node must be greater than
         or equal to f + 1
        """
        actualMsgs = len([
            x for x in getAllArgs(node, Node.processPropagate)
            if x['msg'].request[f.REQ_ID.nm] == request.reqId
            and x['msg'].request[f.IDENTIFIER.nm] == request.identifier
            and x['msg'].request[OPERATION] == request.operation
        ])

        numOfMsgsWithZFN = nodesSize - 1
        numOfMsgsWithFaults = faultyNodes + 1

        assert msgCountOK(nodesSize, faultyNodes, actualMsgs, numOfMsgsWithZFN,
                          numOfMsgsWithFaults)

    timeout = waits.expectedPropagateTime(len(txnPoolNodeSet))
    funcs = [partial(g, node) for node in txnPoolNodeSet]
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
示例#4
0
def reqAcked1(looper, txnPoolNodeSet, sent1, faultyNodes):
    numerOfNodes = len(txnPoolNodeSet)

    request = sdk_json_to_request_object(sent1[0][0])

    # Wait until request received by all nodes
    propTimeout = waits.expectedClientToPoolRequestDeliveryTime(numerOfNodes)
    coros = [partial(checkLastClientReqForNode, node, request)
             for node in txnPoolNodeSet]
    chk_all_funcs(looper, coros, acceptable_fails=faultyNodes,
                  timeout=propTimeout)
    return request
示例#5
0
def reqAcked1(looper, txnPoolNodeSet, sent1, faultyNodes):
    numerOfNodes = len(txnPoolNodeSet)

    request = sdk_json_to_request_object(sent1[0][0])

    # Wait until request received by all nodes
    propTimeout = waits.expectedClientToPoolRequestDeliveryTime(numerOfNodes)
    coros = [partial(checkLastClientReqForNode, node, request)
             for node in txnPoolNodeSet]
    chk_all_funcs(looper, coros, acceptable_fails=faultyNodes,
                  timeout=propTimeout)
    return request
def checkCommitted(looper, txnPoolNodeSet, prepared1, instIds, faultyNodes=0):
    timeout = waits.expectedCommittedTime(len(txnPoolNodeSet))
    nodeCount = len((list(txnPoolNodeSet)))
    quorums = Quorums(nodeCount)

    def g(instId):
        allReplicas = getAllReplicas(txnPoolNodeSet, instId)
        primaryReplica = getPrimaryReplica(txnPoolNodeSet, instId)

        def replicas_gets_correct_num_of_COMMITs():
            """
            num of commit messages must be = n when zero fault;
            n = num of nodes and greater than or equal to
            n-f with faults.
            """
            passes = 0
            numOfMsgsWithZFN = quorums.commit.value
            numOfMsgsWithFault = quorums.commit.value

            key = (primaryReplica.viewNo, primaryReplica.lastPrePrepareSeqNo)
            for r in allReplicas:
                if key in r._ordering_service.commits:
                    rcvdCommitRqst = r._ordering_service.commits[key]
                    actualMsgsReceived = len(rcvdCommitRqst.voters)

                    passes += int(msgCountOK(nodeCount,
                                             faultyNodes,
                                             actualMsgsReceived,
                                             numOfMsgsWithZFN,
                                             numOfMsgsWithFault))

            assert passes >= min(len(allReplicas) - faultyNodes,
                                 numOfMsgsWithZFN)

        replicas_gets_correct_num_of_COMMITs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
def checkCommitted(looper, txnPoolNodeSet, prepared1, instIds, faultyNodes=0):
    timeout = waits.expectedCommittedTime(len(txnPoolNodeSet))
    nodeCount = len((list(txnPoolNodeSet)))
    quorums = Quorums(nodeCount)

    def g(instId):
        allReplicas = getAllReplicas(txnPoolNodeSet, instId)
        primaryReplica = getPrimaryReplica(txnPoolNodeSet, instId)

        def replicas_gets_correct_num_of_COMMITs():
            """
            num of commit messages must be = n when zero fault;
            n = num of nodes and greater than or equal to
            n-f with faults.
            """
            passes = 0
            numOfMsgsWithZFN = quorums.commit.value
            numOfMsgsWithFault = quorums.commit.value

            key = (primaryReplica.viewNo, primaryReplica.lastPrePrepareSeqNo)
            for r in allReplicas:
                if key in r.commits:
                    rcvdCommitRqst = r.commits[key]
                    actualMsgsReceived = len(rcvdCommitRqst.voters)

                    passes += int(msgCountOK(nodeCount,
                                             faultyNodes,
                                             actualMsgsReceived,
                                             numOfMsgsWithZFN,
                                             numOfMsgsWithFault))

            assert passes >= min(len(allReplicas) - faultyNodes,
                                 numOfMsgsWithZFN)

        replicas_gets_correct_num_of_COMMITs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
示例#8
0
def checkPrePrepared(looper,
                     txnPoolNodeSet,
                     propagated1,
                     instIds,
                     faultyNodes=0,
                     timeout=30):
    nodesSize = len(list(txnPoolNodeSet))

    def g(instId):
        primary = getPrimaryReplica(txnPoolNodeSet, instId)
        nonPrimaryReplicas = getNonPrimaryReplicas(txnPoolNodeSet, instId)

        def primarySeesCorrectNumberOfPREPREPAREs():
            """
            no of PRE-PREPARE as seen by processPrePrepare
            method for primary must be 0 with or without faults in system
            """
            l1 = len([
                param
                for param in getAllArgs(primary, primary.processPrePrepare)
            ])
            assert l1 == 0, 'Primary {} sees no pre-prepare'.format(primary)

        def nonPrimarySeesCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE as seen by processPrePrepare method for
            non-primaries must be 1; whn zero faulty nodes in system.

            2. no of PRE-PREPARE as seen by processPrePrepare method for
            non-primaries must be greater than or equal to 0;
            with faults in system.
            """
            expectedPrePrepareRequest = PrePrepare(
                instId, primary.viewNo, primary.lastPrePrepareSeqNo,
                get_utc_epoch(), [propagated1.digest], init_discarded(),
                Replica.batchDigest([
                    propagated1,
                ]), DOMAIN_LEDGER_ID, primary.stateRootHash(DOMAIN_LEDGER_ID),
                primary.txnRootHash(DOMAIN_LEDGER_ID), 0, True)

            passes = 0
            for npr in nonPrimaryReplicas:
                actualMsgs = len([
                    param for param in getAllArgs(npr, npr.processPrePrepare)
                    if (param['pre_prepare'][0:3] + param['pre_prepare'][4:],
                        param['sender']) == (expectedPrePrepareRequest[0:3] +
                                             expectedPrePrepareRequest[4:],
                                             primary.name)
                ])

                numOfMsgsWithZFN = 1
                numOfMsgsWithFaults = 0

                passes += int(
                    msgCountOK(nodesSize, faultyNodes, actualMsgs,
                               numOfMsgsWithZFN, numOfMsgsWithFaults))
            assert passes >= len(nonPrimaryReplicas) - faultyNodes, \
                'Non-primary sees correct number pre-prepares - {}'.format(passes)

        def primarySentsCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE sent by primary is 1 with or without
            fault in system but, when primary is faulty no of sent PRE_PREPARE
             will be zero and primary must be marked as malicious.
            """
            actualMsgs = len([
                param for param in getAllArgs(primary, primary.sendPrePrepare)
                if param['ppReq'].reqIdr[0] == propagated1.digest
                and param['ppReq'].digest == primary.batchDigest([
                    propagated1,
                ])
            ])

            numOfMsgsWithZFN = 1

            # TODO: Considering, Primary is not faulty and will always send
            # PRE-PREPARE. Write separate test for testing when Primary
            # is faulty
            assert msgCountOK(nodesSize, faultyNodes, actualMsgs,
                              numOfMsgsWithZFN, numOfMsgsWithZFN
                              ), 'Primary sends correct number of per-prepare'

        def nonPrimaryReceivesCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE received by non-primaries must be 1
            with zero faults in system, and 0 faults in system.
            """
            passes = 0
            for npr in nonPrimaryReplicas:
                l4 = len([
                    param for param in getAllArgs(npr, npr.addToPrePrepares)
                    if param['pp'].reqIdr[0] == propagated1.digest
                    and param['pp'].digest == primary.batchDigest([
                        propagated1,
                    ])
                ])

                numOfMsgsWithZFN = 1
                numOfMsgsWithFaults = 0

                passes += msgCountOK(nodesSize, faultyNodes, l4,
                                     numOfMsgsWithZFN, numOfMsgsWithFaults)

            assert passes >= len(nonPrimaryReplicas) - faultyNodes, \
                'Non-primary receives correct number of pre-prepare -- {}'.format(passes)

        primarySeesCorrectNumberOfPREPREPAREs()
        nonPrimarySeesCorrectNumberOfPREPREPAREs()
        primarySentsCorrectNumberOfPREPREPAREs()
        nonPrimaryReceivesCorrectNumberOfPREPREPAREs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
示例#9
0
def checkPrepared(looper,
                  txnPoolNodeSet,
                  preprepared1,
                  instIds,
                  faultyNodes=0,
                  timeout=30):
    nodeCount = len(list(txnPoolNodeSet))
    quorums = Quorums(nodeCount)

    def g(instId):
        allReplicas = getAllReplicas(txnPoolNodeSet, instId)
        primary = getPrimaryReplica(txnPoolNodeSet, instId)
        nonPrimaryReplicas = getNonPrimaryReplicas(txnPoolNodeSet, instId)

        def primaryDontSendAnyPREPAREs():
            """
            1. no of PREPARE sent by primary should be 0
            """
            for r in allReplicas:
                for param in getAllArgs(r, Replica.processPrepare):
                    sender = param['sender']
                    assert sender != primary.name

        def allReplicasSeeCorrectNumberOfPREPAREs():
            """
            1. no of PREPARE received by replicas must be n - 1;
            n = num of nodes without fault, and greater than or equal to
            n-f-1 with faults.
            """
            passes = 0
            numOfMsgsWithZFN = nodeCount - 1
            numOfMsgsWithFaults = quorums.prepare.value

            for replica in allReplicas:
                key = primary.viewNo, primary.lastPrePrepareSeqNo
                if key in replica.prepares:
                    actualMsgs = len(replica.prepares[key].voters)

                    passes += int(
                        msgCountOK(nodeCount, faultyNodes, actualMsgs,
                                   numOfMsgsWithZFN, numOfMsgsWithFaults))
            assert passes >= len(allReplicas) - faultyNodes

        def primaryReceivesCorrectNumberOfPREPAREs():
            """
            num of PREPARE seen by primary replica is n - 1;
                n = num of nodes without fault, and greater than or equal to
             n-f-1 with faults.
            """
            actualMsgs = len([
                param for param in getAllArgs(primary, primary.processPrepare)
                if (param['prepare'].instId, param['prepare'].viewNo,
                    param['prepare'].ppSeqNo) == (primary.instId,
                                                  primary.viewNo,
                                                  primary.lastPrePrepareSeqNo)
                and param['sender'] != primary.name
            ])

            numOfMsgsWithZFN = nodeCount - 1
            numOfMsgsWithFaults = quorums.prepare.value

            assert msgCountOK(nodeCount, faultyNodes, actualMsgs,
                              numOfMsgsWithZFN, numOfMsgsWithFaults)
            # TODO what if the primary is faulty?

        def nonPrimaryReplicasReceiveCorrectNumberOfPREPAREs():
            """
            num of PREPARE seen by Non primary replica is n - 2 without
            faults and n-f-2 with faults.
            """
            passes = 0
            numOfMsgsWithZFN = nodeCount - 2
            numOfMsgsWithFaults = quorums.prepare.value - 1

            for npr in nonPrimaryReplicas:
                actualMsgs = len([
                    param for param in getAllArgs(npr, npr.processPrepare)
                    if (param['prepare'].instId, param['prepare'].viewNo,
                        param['prepare'].ppSeqNo) == (
                            primary.instId, primary.viewNo,
                            primary.lastPrePrepareSeqNo)
                ])

                passes += int(
                    msgCountOK(nodeCount, faultyNodes, actualMsgs,
                               numOfMsgsWithZFN, numOfMsgsWithFaults))

            assert passes >= len(nonPrimaryReplicas) - faultyNodes
            # TODO how do we know if one of the faulty nodes is a primary or
            # not?

        primaryDontSendAnyPREPAREs()
        allReplicasSeeCorrectNumberOfPREPAREs()
        primaryReceivesCorrectNumberOfPREPAREs()
        nonPrimaryReplicasReceiveCorrectNumberOfPREPAREs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
def checkPrePrepared(looper,
                     txnPoolNodeSet,
                     propagated1,
                     instIds,
                     faultyNodes=0,
                     timeout=30):
    nodesSize = len(list(txnPoolNodeSet))

    def g(instId):
        primary = getPrimaryReplica(txnPoolNodeSet, instId)
        nonPrimaryReplicas = getNonPrimaryReplicas(txnPoolNodeSet, instId)

        def primarySeesCorrectNumberOfPREPREPAREs():
            """
            no of PRE-PREPARE as seen by processPrePrepare
            method for primary must be 0 with or without faults in system
            """
            l1 = len([param for param in
                      getAllArgs(primary, primary.processPrePrepare)])
            assert l1 == 0, 'Primary {} sees no pre-prepare'.format(primary)

        def nonPrimarySeesCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE as seen by processPrePrepare method for
            non-primaries must be 1; whn zero faulty nodes in system.

            2. no of PRE-PREPARE as seen by processPrePrepare method for
            non-primaries must be greater than or equal to 0;
            with faults in system.
            """
            expectedPrePrepareRequest = PrePrepare(
                instId,
                primary.viewNo,
                primary.lastPrePrepareSeqNo,
                get_utc_epoch(),
                [propagated1.digest],
                init_discarded(),
                Replica.batchDigest([propagated1, ]),
                DOMAIN_LEDGER_ID,
                primary.stateRootHash(DOMAIN_LEDGER_ID),
                primary.txnRootHash(DOMAIN_LEDGER_ID),
                0,
                True,
                primary.stateRootHash(POOL_LEDGER_ID)
            )

            passes = 0
            for npr in nonPrimaryReplicas:
                actualMsgs = len([param for param in
                                  getAllArgs(npr, npr.processPrePrepare)
                                  if (param['pre_prepare'][0:3] +
                                      param['pre_prepare'][4:],
                                      param['sender']) == (
                                      expectedPrePrepareRequest[0:3] +
                                      expectedPrePrepareRequest[4:],
                                      primary.name)])

                numOfMsgsWithZFN = 1
                numOfMsgsWithFaults = 0

                passes += int(msgCountOK(nodesSize,
                                         faultyNodes,
                                         actualMsgs,
                                         numOfMsgsWithZFN,
                                         numOfMsgsWithFaults))
            assert passes >= len(nonPrimaryReplicas) - faultyNodes, \
                'Non-primary sees correct number pre-prepares - {}'.format(passes)

        def primarySentsCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE sent by primary is 1 with or without
            fault in system but, when primary is faulty no of sent PRE_PREPARE
             will be zero and primary must be marked as malicious.
            """
            actualMsgs = len([param for param in
                              getAllArgs(primary, primary.sendPrePrepare)
                              if param['ppReq'].reqIdr[0] == propagated1.digest
                              and param['ppReq'].digest ==
                              primary.batchDigest([propagated1, ])])

            numOfMsgsWithZFN = 1

            # TODO: Considering, Primary is not faulty and will always send
            # PRE-PREPARE. Write separate test for testing when Primary
            # is faulty
            assert msgCountOK(nodesSize,
                              faultyNodes,
                              actualMsgs,
                              numOfMsgsWithZFN,
                              numOfMsgsWithZFN), 'Primary sends correct number of per-prepare'

        def nonPrimaryReceivesCorrectNumberOfPREPREPAREs():
            """
            1. no of PRE-PREPARE received by non-primaries must be 1
            with zero faults in system, and 0 faults in system.
            """
            passes = 0
            for npr in nonPrimaryReplicas:
                l4 = len([param for param in
                          getAllArgs(npr, npr.addToPrePrepares)
                          if param['pp'].reqIdr[0] == propagated1.digest
                          and param['pp'].digest ==
                          primary.batchDigest([propagated1, ])])

                numOfMsgsWithZFN = 1
                numOfMsgsWithFaults = 0

                passes += msgCountOK(nodesSize,
                                     faultyNodes,
                                     l4,
                                     numOfMsgsWithZFN,
                                     numOfMsgsWithFaults)

            assert passes >= len(nonPrimaryReplicas) - faultyNodes, \
                'Non-primary receives correct number of pre-prepare -- {}'.format(passes)

        primarySeesCorrectNumberOfPREPREPAREs()
        nonPrimarySeesCorrectNumberOfPREPREPAREs()
        primarySentsCorrectNumberOfPREPREPAREs()
        nonPrimaryReceivesCorrectNumberOfPREPREPAREs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)
def checkPrepared(looper, txnPoolNodeSet, preprepared1, instIds, faultyNodes=0,
                  timeout=30):
    nodeCount = len(list(txnPoolNodeSet))
    quorums = Quorums(nodeCount)

    def g(instId):
        allReplicas = getAllReplicas(txnPoolNodeSet, instId)
        primary = getPrimaryReplica(txnPoolNodeSet, instId)
        nonPrimaryReplicas = getNonPrimaryReplicas(txnPoolNodeSet, instId)

        def primaryDontSendAnyPREPAREs():
            """
            1. no of PREPARE sent by primary should be 0
            """
            for r in allReplicas:
                for param in getAllArgs(r, Replica.processPrepare):
                    sender = param['sender']
                    assert sender != primary.name

        def allReplicasSeeCorrectNumberOfPREPAREs():
            """
            1. no of PREPARE received by replicas must be n - 1;
            n = num of nodes without fault, and greater than or equal to
            n-f-1 with faults.
            """
            passes = 0
            numOfMsgsWithZFN = nodeCount - 1
            numOfMsgsWithFaults = quorums.prepare.value

            for replica in allReplicas:
                key = primary.viewNo, primary.lastPrePrepareSeqNo
                if key in replica.prepares:
                    actualMsgs = len(replica.prepares[key].voters)

                    passes += int(msgCountOK(nodeCount,
                                             faultyNodes,
                                             actualMsgs,
                                             numOfMsgsWithZFN,
                                             numOfMsgsWithFaults))
            assert passes >= len(allReplicas) - faultyNodes

        def primaryReceivesCorrectNumberOfPREPAREs():
            """
            num of PREPARE seen by primary replica is n - 1;
                n = num of nodes without fault, and greater than or equal to
             n-f-1 with faults.
            """
            actualMsgs = len([param for param in
                              getAllArgs(primary,
                                         primary.processPrepare)
                              if (param['prepare'].instId,
                                  param['prepare'].viewNo,
                                  param['prepare'].ppSeqNo) == (
                                  primary.instId, primary.viewNo,
                                  primary.lastPrePrepareSeqNo) and
                              param['sender'] != primary.name])

            numOfMsgsWithZFN = nodeCount - 1
            numOfMsgsWithFaults = quorums.prepare.value

            assert msgCountOK(nodeCount,
                              faultyNodes,
                              actualMsgs,
                              numOfMsgsWithZFN,
                              numOfMsgsWithFaults)
            # TODO what if the primary is faulty?

        def nonPrimaryReplicasReceiveCorrectNumberOfPREPAREs():
            """
            num of PREPARE seen by Non primary replica is n - 2 without
            faults and n-f-2 with faults.
            """
            passes = 0
            numOfMsgsWithZFN = nodeCount - 2
            numOfMsgsWithFaults = quorums.prepare.value - 1

            for npr in nonPrimaryReplicas:
                actualMsgs = len(
                    [
                        param for param in getAllArgs(
                        npr,
                        npr.processPrepare) if (
                                                   param['prepare'].instId,
                                                   param['prepare'].viewNo,
                                                   param['prepare'].ppSeqNo) == (
                                                   primary.instId,
                                                   primary.viewNo,
                                                   primary.lastPrePrepareSeqNo)])

                passes += int(msgCountOK(nodeCount,
                                         faultyNodes,
                                         actualMsgs,
                                         numOfMsgsWithZFN,
                                         numOfMsgsWithFaults))

            assert passes >= len(nonPrimaryReplicas) - faultyNodes
            # TODO how do we know if one of the faulty nodes is a primary or
            # not?

        primaryDontSendAnyPREPAREs()
        allReplicasSeeCorrectNumberOfPREPAREs()
        primaryReceivesCorrectNumberOfPREPAREs()
        nonPrimaryReplicasReceiveCorrectNumberOfPREPAREs()

    funcs = [partial(g, instId) for instId in instIds]
    # TODO Select or create the timeout from 'waits'. Don't use constant.
    # looper.run(eventuallyAll(*coros, retryWait=1, totalTimeout=timeout))
    chk_all_funcs(looper, funcs, faultyNodes, timeout)