def launch_simple_architecture(config, supervisor):
# Pusher
pusher_generator = PusherGenerator()
pusher_info = pusher_generator.generate(config)
pusher_cls, pusher_start_message = pusher_info['test_pusher']
pusher = supervisor.launch(pusher_cls, pusher_start_message)
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher_start_message = DispatcherStartMessage(
'system', 'dispatcher', DummyFormulaActor,
DummyFormulaValues({'test_pusher': pusher}, 0), route_table, 'cpu')
dispatcher = supervisor.launch(DispatcherActor, dispatcher_start_message)
# Puller
report_filter = Filter()
report_filter.filter(filter_rule, dispatcher)
puller_generator = PullerGenerator(report_filter, [])
puller_info = puller_generator.generate(config)
puller_cls, puller_start_message = puller_info['test_puller']
puller = supervisor.launch(puller_cls, puller_start_message)
def basic_filt():
"""
Return a basic filter
"""
dispatcher = DispatcherActor('dispatcher__', Mock(), Mock())
filt = Filter()
filt.filter(lambda msg: True, dispatcher)
return filt
def run(self):
# Setup signal handler
def term_handler(_, __):
puller.send_kill()
dispatcher.send_kill()
pusher.send_kill()
exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
stream_mode = True
supervisor = BackendSupervisor(stream_mode)
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result',
HWPCModel())
pusher = PusherActor("pusher_mongodb",
PowerReport,
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: RAPLFormulaActor(
name, pusher, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'ROOT'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI,
'MongoDB1',
'test_hwrep',
HWPCModel(),
stream_mode=stream_mode)
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
time.sleep(1)
os.kill(dispatcher.pid, signal.SIGKILL)
supervisor.join()
def run(self):
config = {
'verbose': True,
'stream': True,
'output': {
'test_pusher': {
'type': 'mongodb',
'model': 'PowerReport',
'uri': MONGO_URI,
'db': MONGO_DATABASE_NAME,
'collection': MONGO_OUTPUT_COLLECTION_NAME
}
},
'input': {
'test_puller': {
'type': 'mongodb',
'model': 'HWPCReport',
'uri': MONGO_URI,
'db': MONGO_DATABASE_NAME,
'collection': MONGO_INPUT_COLLECTION_NAME
}
}
}
supervisor = Supervisor(config['verbose'])
def term_handler(_, __):
supervisor.shutdown()
exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
# Pusher
pusher_generator = PusherGenerator()
pusher_info = pusher_generator.generate(config)
pusher_cls, pusher_start_message = pusher_info['test_pusher']
pusher = supervisor.launch(pusher_cls, pusher_start_message)
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher_start_message = DispatcherStartMessage(
'system', 'dispatcher', DummyFormulaActor,
DummyFormulaValues({'test_pusher': pusher}, 0), route_table, 'cpu')
dispatcher = supervisor.launch(DispatcherActor,
dispatcher_start_message)
# Puller
report_filter = Filter()
report_filter.filter(filter_rule, dispatcher)
puller_generator = PullerGenerator(report_filter, [])
puller_info = puller_generator.generate(config)
puller_cls, puller_start_message = puller_info['test_puller']
puller = supervisor.launch(puller_cls, puller_start_message)
supervisor.monitor()
def fake_dispatcher_filt():
"""
Return a filter that dispatch to a fake dispatcher
"""
dispatcher = FakeDispatcherActor('fake_dispatcher__' +
str(random.randint(1, 100000)),
DISPATCHER_SOCKET_ADDRESS,
level_logger=LOG_LEVEL)
filt = Filter()
filt.filter(lambda msg: True, dispatcher)
return filt
def run_selfwatts(args) -> None:
"""
Run PowerAPI with the SelfWatts formula.
:param args: CLI arguments namespace
"""
fconf = args['formula']['selfwatts']
logging.info('SelfWatts version %s using PowerAPI version %s', selfwatts_version, powerapi_version)
if fconf['disable-cpu-formula'] and fconf['disable-dram-formula']:
logging.error('You need to enable at least one formula')
return
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(HWPCDepthLevel.SOCKET, primary=True))
cpu_topology = CPUTopology(fconf['cpu-tdp'], fconf['cpu-base-clock'], fconf['cpu-ratio-min'],
fconf['cpu-ratio-base'], fconf['cpu-ratio-max'],
fconf['cpu-num-fixed-counters'], fconf['cpu-num-general-counters'])
report_filter = Filter()
pullers = PullerGenerator(report_filter).generate(args)
pushers = PusherGenerator().generate(args)
dispatchers = {}
logging.info('CPU formula is %s' % ('DISABLED' if fconf['disable-cpu-formula'] else 'ENABLED'))
if not fconf['disable-cpu-formula']:
logging.info('CPU formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (fconf['cpu-rapl-ref-event'], fconf['cpu-error-threshold']))
dispatchers['cpu'] = setup_cpu_formula_actor(fconf, route_table, report_filter, cpu_topology, pushers)
logging.info('DRAM formula is %s' % ('DISABLED' if fconf['disable-dram-formula'] else 'ENABLED'))
if not fconf['disable-dram-formula']:
logging.info('DRAM formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (fconf['dram-rapl-ref-event'], fconf['dram-error-threshold']))
dispatchers['dram'] = setup_dram_formula_actor(fconf, route_table, report_filter, cpu_topology, pushers)
actors = OrderedDict(**pushers, **dispatchers, **pullers)
def term_handler(_, __):
for _, actor in actors.items():
actor.soft_kill()
exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
supervisor = BackendSupervisor(config['stream'])
try:
logging.info('Starting SelfWatts actors...')
for _, actor in actors.items():
supervisor.launch_actor(actor)
except ActorInitError as exn:
logging.error('Actor initialization error: ' + exn.message)
supervisor.kill_actors()
logging.info('SelfWatts is now running...')
supervisor.join()
logging.info('SelfWatts is shutting down...')
def test_run_with_delay_between_message(unused_tcp_port, database, supervisor):
"""
run the same test but set a delay of 1s after sendig the 5th first messages
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL,
max_size=0)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_socket = SocketDB(unused_tcp_port)
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_socket",
input_socket,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL,
stream_mode=True)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
time.sleep(1)
json_reports = extract_json_report(10)
client = ClientThreadDelay(json_reports, unused_tcp_port)
client.start()
time.sleep(2)
check_db()
def puller(request, database, stream_mode):
"""
Setup and Teardown for managing a PullerActor
setup: create a PullerActor and start its process
teardown: terminate the PullerActor process
"""
dispatcher = DispatcherActor('dispatcher__', Mock(), Mock())
filt = Filter()
filt.filter(lambda msg: True, dispatcher)
puller_actor = PullerActor("test_puller_" + str(request.node.name),
database,
filt,
HWPCModel(),
stream_mode=stream_mode,
level_logger=LOG_LEVEL)
return puller_actor
def test_run(database, supervisor):
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: CrashFormulaActor(
name, {'my_pusher': pusher}, 6, CrashException, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
supervisor.join()
check_db()
def test_run(database, supervisor):
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb", PowerModel(), output_mongodb, level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose:
DummyFormulaActor(name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher', formula_factory, route_table, level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb", input_mongodb, report_filter, HWPCModel(), level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
t = time.time()
number_of_output_reports = 0
for i in range(3):
time.sleep(0.2)
current = get_number_of_output_reports()
assert current > number_of_output_reports
number_of_output_reports = current
time.sleep(0.1)
supervisor.join()
class TestPuller(AbstractTestActorWithDB):
@pytest.fixture
def fake_dispatcher(self):
return FakeDispatcher()
@pytest.fixture
def fake_filter(self, fake_dispatcher):
fake_filter = Mock()
fake_filter.filters = [(Mock(return_value=True), Mock())]
fake_filter.route = Mock(return_value=[fake_dispatcher])
fake_filter.get_type = Mock(return_value=Report)
return fake_filter
@pytest.fixture
def actor(self, fake_db, filt, fake_filter):
filter = fake_filter if filt is None else filt
return PullerActor('puller_test',
fake_db,
filter,
0,
level_logger=logging.DEBUG)
@define_database_content([REPORT1, REPORT2])
def test_start_actor_with_db_thath_contains_2_report_make_actor_send_reports_to_dispatcher(
self, started_actor, fake_dispatcher, content):
for report in content:
assert fake_dispatcher.q.get(timeout=2) == report
def test_starting_actor_in_stream_mode_make_it_termiante_itself_after_empty_db(
self, started_actor):
started_actor.join(2)
assert started_actor.is_alive() is False
@define_filter(Filter())
def test_send_start_message_to_puller_without_filter_answer_with_error_message(
self, init_actor):
init_actor.send_control(StartMessage())
msg = init_actor.receive_control(2000)
assert isinstance(msg, ErrorMessage)
def launch_powerapi(config, logger):
##########################################################################
# Actor Creation
# Pusher
pushers = generate_pushers(config)
# Formula
formula_factory = (lambda name, verbose: RAPLFormulaActor(
name, pushers, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'ROOT'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=config['verbose'])
# Puller
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
pullers = generate_pullers(config, report_filter)
##########################################################################
# Actor start step
# Setup signal handler
def term_handler(_, __):
for _, puller in pullers.items():
puller.send_kill()
dispatcher.send_kill()
for _, pusher in pushers.items():
pusher.send_kill()
exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
supervisor = BackendSupervisor(config['stream'])
try:
for _, pusher in pushers.items():
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
for _, puller in pullers.items():
supervisor.launch_actor(puller)
except zmq.error.ZMQError as exn:
logger.error('Communication error, ZMQError code : ' + str(exn.errno) +
' reason : ' + exn.strerror)
supervisor.kill_actors()
except ActorInitError as exn:
logger.error('Actor initialisation error, reason : ' + exn.message)
supervisor.kill_actors()
##########################################################################
# Actor run step
# wait
supervisor.join()
def test_with_slow_formula(database2, supervisor):
"""Test the architecture when it has to deal with a lot of data, with a formula
that is very slow. Input database contain a lot of data, but formula can't
handle them. The puller will end before formula end to handle data and
supervisor will begin to send poisonpill message to all actors. Formula and
pusher must continue to handle report.
Architecture :
- 1 puller (connected to MongoDB1 [collection test_hwrep], stream mode off)
- 1 dispatcher (HWPC dispatch rule (dispatch by SOCKET)
- 1 Dummy Formula with will wait 0.2 ms when it receive a message
- 1 pusher (connected to MongoDB1 [collection test_result]
MongoDB1 content :
- 30 HWPC repport with two socket and one RAPL_EVENT
Scenario:
- Launch the full architecture
Test if:
- after powerapi handle all the reports, test if all the reports was handeled
by the formula and pushed to the mongo database and if no report were lost
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose, sleep_time=0.1))
# DummyFormulaActor(name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
supervisor.join()
assert get_number_of_output_reports() == 30 * 2
def empty_filt():
"""
Return an empty filter
"""
filt = Filter()
return filt
def test_run(database, supervisor):
"""
Test the architecture when it has to deal with a lot of data, pulled with a
hight frequency. Input database contain a lot of data, that will overflow the
backend. Backend have to handle all of this data and continue to compute data
and writing them in real time.
Architecture :
- 1 puller (connected to MongoDB1 [collection test_hwrep], stream mode off)
- 1 dispatcher (HWPC dispatch rule (dispatch by SOCKET)
- 1 Dummy Formula
- 1 pusher (connected to MongoDB1 [collection test_result]
MongoDB1 content :
- 3000 HWPC repport with two socket and one RAPL_EVENT
Scenario:
- Launch the full architecture
Test if:
- each 50 ms, reports are writen in the output database
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
t = time.time()
number_of_output_reports = 0
for i in range(3):
time.sleep(0.2)
current = get_number_of_output_reports()
assert current >= number_of_output_reports
number_of_output_reports = current
time.sleep(0.1)
supervisor.join()
supervisor.launch_actor(puller)
assert not is_actor_alive(puller)
assert isinstance(puller.receive_control(), ErrorMessage)
@define_database(mongodb_database(URI, "test_mongodb", "test_mongodb1"))
@define_filt(basic_filt())
def test_puller_init_ok(initialized_puller_with_dispatcher):
"""
Create a PullerActor and send a StartMessage
"""
assert is_actor_alive(initialized_puller_with_dispatcher)
@define_database(mongodb_database(URI, "test_mongodb", "test_mongodb1"))
@define_filt(Filter())
def test_puller_init_already_init(initialized_puller):
"""
Create a PullerActor and send a StartMessage to an already initialized Actor
"""
initialized_puller.send_control(StartMessage())
assert is_actor_alive(initialized_puller)
assert isinstance(initialized_puller.receive_control(), ErrorMessage)
@define_database(mongodb_database(URI, "test_mongodb", "test_mongodb1"))
@define_filt(basic_filt())
def test_puller_kill_without_init(started_puller):
"""
Create a PullerActor and kill him with a PoisonPillMessage before initialization
"""
def run_rapl(args) -> None:
"""
Run PowerAPI with the SmartWatts formula.
:param args: CLI arguments namespace
:param logger: Logger to use for the actors
"""
fconf = args
logging.info('RAPL-Formula version %s using PowerAPI version %s', rapl_formula_version, powerapi_version)
if not fconf['enable-cpu-formula'] and not fconf['enable-dram-formula']:
logging.error('You need to enable at least one formula')
return
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(HWPCDepthLevel.SOCKET, primary=True))
report_filter = Filter()
report_modifier_list = ReportModifierGenerator().generate(fconf)
supervisor = Supervisor(args['verbose'])
def term_handler(_, __):
supervisor.shutdown()
sys.exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
try:
logging.info('Starting RAPL-formula actors...')
power_pushers = {}
pushers_info = PusherGenerator().generate(args)
for pusher_name in pushers_info:
pusher_cls, pusher_start_message = pushers_info[pusher_name]
power_pushers[pusher_name] = supervisor.launch(
pusher_cls, pusher_start_message
)
logging.info('CPU formula is %s' % ('DISABLED' if not fconf['enable-cpu-formula'] else 'ENABLED'))
if fconf['enable-cpu-formula']:
logging.info('CPU formula parameters: RAPL_REF=%s' % (fconf['cpu-rapl-ref-event']))
setup_cpu_formula_actor(supervisor, fconf, route_table, report_filter, power_pushers)
logging.info('DRAM formula is %s' % ('DISABLED' if not fconf['enable-dram-formula'] else 'ENABLED'))
if fconf['enable-dram-formula']:
logging.info('DRAM formula parameters: RAPL_REF=%s' % (fconf['dram-rapl-ref-event']))
setup_dram_formula_actor(supervisor, fconf, route_table, report_filter, power_pushers)
pullers_info = PullerGenerator(report_filter, report_modifier_list).generate(args)
for puller_name in pullers_info:
puller_cls, puller_start_message = pullers_info[puller_name]
supervisor.launch(puller_cls, puller_start_message)
except InitializationException as exn:
logging.error('Actor initialization error: ' + exn.msg)
supervisor.shutdown()
sys.exit(-1)
logging.info('RAPL-formula is now running...')
supervisor.monitor()
logging.info('RAPL-formula is shutting down...')
def test_without_filter(self):
""" Test filter without any filter, raise an error """
hwpc_filter = Filter()
with pytest.raises(FilterUselessError) as pytest_wrapped:
hwpc_filter.route(create_report_root({}))
assert pytest_wrapped.type == FilterUselessError
def test_with_two_filter(self, database):
"""
Test filter with two filter
- 2 first report return first dispatcher
- 2 next report return first and second dispatcher
- 2 next report return None
"""
mongodb = MongoDB(URI, "test_filter", "test_filter1")
mongodb.connect()
hwpc_filter = Filter()
hwpc_filter.filter(lambda msg:
True if "sensor" in msg.sensor else False,
1)
hwpc_filter.filter(lambda msg:
True if "test1" in msg.sensor else False,
2)
hwpc_filter.filter(lambda msg:
True if msg.sensor == "sensor_test2" else False,
3)
mongodb_it = mongodb.iter(HWPCModel(), False)
for _ in range(2):
hwpc_report = next(mongodb_it)
assert hwpc_filter.route(hwpc_report) == [1, 2]
for _ in range(2):
hwpc_report = next(mongodb_it)
assert hwpc_filter.route(hwpc_report) == [1, 3]
for _ in range(2):
hwpc_report = next(mongodb_it)
assert hwpc_filter.route(hwpc_report) == [1]
def test_run(files, supervisor):
config = {
'verbose': LOG_LEVEL,
'stream': False,
'input': {
'csv': {
'puller': {
'files': FILES,
'model': 'HWPCReport',
'name': 'puller',
}
}
},
'output': {
'csv': {
'pusher': {
'model': 'PowerReport',
'name': 'pusher',
'directory': ROOT_PATH
}
}
}
}
# Pusher
pusher_generator = PusherGenerator()
pushers = pusher_generator.generate(config)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, pushers, level_logger=config['verbose']))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller_generator = PullerGenerator(report_filter)
pullers = puller_generator.generate(config)
for _, pusher in pushers.items():
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
for _, puller in pullers.items():
supervisor.launch_actor(puller)
supervisor.join()
check_output_file()
def empty_filter(self):
fake_filter = Filter()
return fake_filter
def fake_filter(self, fake_dispatcher):
fake_filter = Filter()
fake_filter.filter(filter_rule, fake_dispatcher)
return fake_filter
def run_smartwatts(args, logger):
"""
Run PowerAPI with the SmartWatts formula.
:param args: CLI arguments namespace
:param logger: Log level to use for the actors
"""
# Print configuration
logger.info('SmartWatts version %s using PowerAPI version %s', smartwatts_version, powerapi_version)
logger.info('CPU formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (args.cpu_rapl_ref_event, args.cpu_error_threshold))
logger.info('DRAM formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (args.dram_rapl_ref_event, args.dram_error_threshold))
# Reports pusher
power_output_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_powermeter_collection, None)
power_report_pusher = PusherActor('power_report_pusher', PowerReport, power_output_mongodb)
formula_output_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_formula_collection, None)
formula_report_pusher = PusherActor('formula_report_pusher', FormulaReport, formula_output_mongodb)
# Sensor reports route table
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(HWPCDepthLevel.SOCKET, primary=True))
# Shared parameters
pushers = {'power': power_report_pusher, 'formula': formula_report_pusher}
cpu_topology = CPUTopology(args.cpu_base_clock, args.cpu_ratio_min, args.cpu_ratio_base, args.cpu_ratio_max)
# CPU formula dispatcher
def cpu_formula_factory(name: str, _):
scope = SmartWattsFormulaScope.CPU
config = SmartWattsFormulaConfig(scope, args.cpu_rapl_ref_event, args.cpu_error_threshold, cpu_topology)
return SmartWattsFormulaActor(name, pushers, config)
cpu_dispatcher = DispatcherActor('cpu_dispatcher', cpu_formula_factory, route_table)
# DRAM formula dispatcher
def dram_formula_factory(name: str, _):
scope = SmartWattsFormulaScope.DRAM
config = SmartWattsFormulaConfig(scope, args.cpu_rapl_ref_event, args.cpu_error_threshold, cpu_topology)
return SmartWattsFormulaActor(name, pushers, config)
dram_dispatcher = DispatcherActor('dram_dispatcher', dram_formula_factory, route_table)
# Sensor reports puller
input_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_sensor_collection, HWPCModel(), stream_mode=True)
report_filter = Filter()
report_filter.filter(lambda msg: True, cpu_dispatcher)
report_filter.filter(lambda msg: True, dram_dispatcher)
puller = PullerActor('hwpc_report_puller', input_mongodb, report_filter)
def term_handler(_, __):
puller.join()
cpu_dispatcher.join()
dram_dispatcher.join()
power_report_pusher.join()
formula_report_pusher.join()
exit(0)
# TERM/INT signals handler
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
# Actors supervision
supervisor = Supervisor()
try:
supervisor.launch_actor(power_report_pusher)
supervisor.launch_actor(formula_report_pusher)
supervisor.launch_actor(cpu_dispatcher)
supervisor.launch_actor(dram_dispatcher)
supervisor.launch_actor(puller)
logger.info('Actors initialized, SmartWatts is now running...')
except zmq.error.ZMQError as exn:
logger.error('Communication error, ZMQError code : ' + str(exn.errno) + ' reason : ' + exn.strerror)
supervisor.kill_actors()
except ActorInitError as exn:
logger.error('Actor initialisation error, reason : ' + exn.message)
supervisor.kill_actors()
supervisor.join()
