def test_no_stream(self):
""" Test if the actor kill himself after reading db """
puller = PullerActor("puller_mongo", get_fake_db(), get_fake_filter(),
0)
supervisor = Supervisor()
supervisor.launch_actor(puller)
puller.join()
assert puller.is_alive() is False
def actor(self, fake_db, filt, fake_filter):
filter = fake_filter if filt is None else filt
return PullerActor('puller_test',
fake_db,
filter,
0,
level_logger=logging.DEBUG)
def run(self):
# Setup signal handler
def term_handler(_, __):
puller.send_kill()
dispatcher.send_kill()
pusher.send_kill()
exit(0)
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
stream_mode = True
supervisor = BackendSupervisor(stream_mode)
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result',
HWPCModel())
pusher = PusherActor("pusher_mongodb",
PowerReport,
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: RAPLFormulaActor(
name, pusher, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'ROOT'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI,
'MongoDB1',
'test_hwrep',
HWPCModel(),
stream_mode=stream_mode)
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
time.sleep(1)
os.kill(dispatcher.pid, signal.SIGKILL)
supervisor.join()
def puller(request, database, filt):
"""
Setup and Teardown for managing a PullerActor
setup: create a PullerActor and start its process
teardown: terminate the PullerActor process
"""
puller_actor = PullerActor("test_puller_" + str(request.node.name),
database,
filt,
level_logger=LOG_LEVEL)
yield puller_actor
def test_run_with_delay_between_message(unused_tcp_port, database, supervisor):
"""
run the same test but set a delay of 1s after sendig the 5th first messages
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL,
max_size=0)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_socket = SocketDB(unused_tcp_port)
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_socket",
input_socket,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL,
stream_mode=True)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
time.sleep(1)
json_reports = extract_json_report(10)
client = ClientThreadDelay(json_reports, unused_tcp_port)
client.start()
time.sleep(2)
check_db()
def puller(request, database, stream_mode):
"""
Setup and Teardown for managing a PullerActor
setup: create a PullerActor and start its process
teardown: terminate the PullerActor process
"""
dispatcher = DispatcherActor('dispatcher__', Mock(), Mock())
filt = Filter()
filt.filter(lambda msg: True, dispatcher)
puller_actor = PullerActor("test_puller_" + str(request.node.name),
database,
filt,
HWPCModel(),
stream_mode=stream_mode,
level_logger=LOG_LEVEL)
return puller_actor
def test_run(database, supervisor):
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: CrashFormulaActor(
name, {'my_pusher': pusher}, 6, CrashException, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
supervisor.join()
check_db()
def generate_pullers(config, report_filter):
pullers = {}
for db_config in config['input']:
try:
factory = DB_FACTORY[db_config['type']]
model = MODEL_FACTORY[db_config['model']]
name = 'puller_' + db_config['type']
puller = PullerActor(name,
factory(db_config),
report_filter,
model,
stream_mode=config['stream'],
level_logger=config['verbose'])
pullers[name] = puller
except KeyError as exn:
msg = 'CLI error : argument ' + exn.args[0]
msg += ' needed with --output ' + db_config['type']
print(msg, file=sys.stderr)
sys.exit()
return pullers
def test_run(database, supervisor):
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb", PowerModel(), output_mongodb, level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose:
DummyFormulaActor(name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher', formula_factory, route_table, level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb", input_mongodb, report_filter, HWPCModel(), level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
t = time.time()
number_of_output_reports = 0
for i in range(3):
time.sleep(0.2)
current = get_number_of_output_reports()
assert current > number_of_output_reports
number_of_output_reports = current
time.sleep(0.1)
supervisor.join()
def _actor_factory(self, name, db, model, stream_mode, level_logger):
return PullerActor(name, db, self.report_filter, model, stream_mode,
level_logger)
def test_run(database, supervisor):
"""
Test the architecture when it has to deal with a lot of data, pulled with a
hight frequency. Input database contain a lot of data, that will overflow the
backend. Backend have to handle all of this data and continue to compute data
and writing them in real time.
Architecture :
- 1 puller (connected to MongoDB1 [collection test_hwrep], stream mode off)
- 1 dispatcher (HWPC dispatch rule (dispatch by SOCKET)
- 1 Dummy Formula
- 1 pusher (connected to MongoDB1 [collection test_result]
MongoDB1 content :
- 3000 HWPC repport with two socket and one RAPL_EVENT
Scenario:
- Launch the full architecture
Test if:
- each 50 ms, reports are writen in the output database
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
t = time.time()
number_of_output_reports = 0
for i in range(3):
time.sleep(0.2)
current = get_number_of_output_reports()
assert current >= number_of_output_reports
number_of_output_reports = current
time.sleep(0.1)
supervisor.join()
def test_with_slow_formula(database2, supervisor):
"""Test the architecture when it has to deal with a lot of data, with a formula
that is very slow. Input database contain a lot of data, but formula can't
handle them. The puller will end before formula end to handle data and
supervisor will begin to send poisonpill message to all actors. Formula and
pusher must continue to handle report.
Architecture :
- 1 puller (connected to MongoDB1 [collection test_hwrep], stream mode off)
- 1 dispatcher (HWPC dispatch rule (dispatch by SOCKET)
- 1 Dummy Formula with will wait 0.2 ms when it receive a message
- 1 pusher (connected to MongoDB1 [collection test_result]
MongoDB1 content :
- 30 HWPC repport with two socket and one RAPL_EVENT
Scenario:
- Launch the full architecture
Test if:
- after powerapi handle all the reports, test if all the reports was handeled
by the formula and pushed to the mongo database and if no report were lost
"""
# Pusher
output_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_result')
pusher = PusherActor("pusher_mongodb",
PowerModel(),
output_mongodb,
level_logger=LOG_LEVEL)
# Formula
formula_factory = (lambda name, verbose: DummyFormulaActor(
name, {'my_pusher': pusher}, level_logger=verbose, sleep_time=0.1))
# DummyFormulaActor(name, {'my_pusher': pusher}, level_logger=verbose))
# Dispatcher
route_table = RouteTable()
route_table.dispatch_rule(
HWPCReport,
HWPCDispatchRule(getattr(HWPCDepthLevel, 'SOCKET'), primary=True))
dispatcher = DispatcherActor('dispatcher',
formula_factory,
route_table,
level_logger=LOG_LEVEL)
# Puller
input_mongodb = MongoDB(DB_URI, 'MongoDB1', 'test_hwrep')
report_filter = Filter()
report_filter.filter(lambda msg: True, dispatcher)
puller = PullerActor("puller_mongodb",
input_mongodb,
report_filter,
HWPCModel(),
level_logger=LOG_LEVEL)
supervisor.launch_actor(pusher)
supervisor.launch_actor(dispatcher)
supervisor.launch_actor(puller)
supervisor.join()
assert get_number_of_output_reports() == 30 * 2
def run_smartwatts(args, logger):
"""
Run PowerAPI with the SmartWatts formula.
:param args: CLI arguments namespace
:param logger: Log level to use for the actors
"""
# Print configuration
logger.info('SmartWatts version %s using PowerAPI version %s', smartwatts_version, powerapi_version)
logger.info('CPU formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (args.cpu_rapl_ref_event, args.cpu_error_threshold))
logger.info('DRAM formula parameters: RAPL_REF=%s ERROR_THRESHOLD=%sW' % (args.dram_rapl_ref_event, args.dram_error_threshold))
# Reports pusher
power_output_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_powermeter_collection, None)
power_report_pusher = PusherActor('power_report_pusher', PowerReport, power_output_mongodb)
formula_output_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_formula_collection, None)
formula_report_pusher = PusherActor('formula_report_pusher', FormulaReport, formula_output_mongodb)
# Sensor reports route table
route_table = RouteTable()
route_table.dispatch_rule(HWPCReport, HWPCDispatchRule(HWPCDepthLevel.SOCKET, primary=True))
# Shared parameters
pushers = {'power': power_report_pusher, 'formula': formula_report_pusher}
cpu_topology = CPUTopology(args.cpu_base_clock, args.cpu_ratio_min, args.cpu_ratio_base, args.cpu_ratio_max)
# CPU formula dispatcher
def cpu_formula_factory(name: str, _):
scope = SmartWattsFormulaScope.CPU
config = SmartWattsFormulaConfig(scope, args.cpu_rapl_ref_event, args.cpu_error_threshold, cpu_topology)
return SmartWattsFormulaActor(name, pushers, config)
cpu_dispatcher = DispatcherActor('cpu_dispatcher', cpu_formula_factory, route_table)
# DRAM formula dispatcher
def dram_formula_factory(name: str, _):
scope = SmartWattsFormulaScope.DRAM
config = SmartWattsFormulaConfig(scope, args.cpu_rapl_ref_event, args.cpu_error_threshold, cpu_topology)
return SmartWattsFormulaActor(name, pushers, config)
dram_dispatcher = DispatcherActor('dram_dispatcher', dram_formula_factory, route_table)
# Sensor reports puller
input_mongodb = MongoDB(args.mongodb_uri, args.mongodb_database, args.mongodb_sensor_collection, HWPCModel(), stream_mode=True)
report_filter = Filter()
report_filter.filter(lambda msg: True, cpu_dispatcher)
report_filter.filter(lambda msg: True, dram_dispatcher)
puller = PullerActor('hwpc_report_puller', input_mongodb, report_filter)
def term_handler(_, __):
puller.join()
cpu_dispatcher.join()
dram_dispatcher.join()
power_report_pusher.join()
formula_report_pusher.join()
exit(0)
# TERM/INT signals handler
signal.signal(signal.SIGTERM, term_handler)
signal.signal(signal.SIGINT, term_handler)
# Actors supervision
supervisor = Supervisor()
try:
supervisor.launch_actor(power_report_pusher)
supervisor.launch_actor(formula_report_pusher)
supervisor.launch_actor(cpu_dispatcher)
supervisor.launch_actor(dram_dispatcher)
supervisor.launch_actor(puller)
logger.info('Actors initialized, SmartWatts is now running...')
except zmq.error.ZMQError as exn:
logger.error('Communication error, ZMQError code : ' + str(exn.errno) + ' reason : ' + exn.strerror)
supervisor.kill_actors()
except ActorInitError as exn:
logger.error('Actor initialisation error, reason : ' + exn.message)
supervisor.kill_actors()
supervisor.join()