def __init__(self, nrange):
"""Construct a range from a JSON NumericRange."""
# TODO: Would be nice if this class could treat missing
# lower/upper as -/+ infinity.
# TODO: Figure out why this can't just point to a NumericRange
valid, message = pscheduler.json_validate(nrange, {
"type": "object",
"properties": {
"lower": { "$ref": "#/pScheduler/Numeric" },
"upper": { "$ref": "#/pScheduler/Numeric" }
},
"additionalProperties": False,
"required": [ "lower", "upper" ]
})
if not valid:
raise ValueError("Invalid numeric range: %s" % message)
lower = nrange['lower']
if type(lower) in [ str, unicode ]:
self.lower = pscheduler.si_as_number(lower)
else:
self.lower = lower
self.lower_str = str(lower)
upper = nrange['upper']
if type(upper) in [ str, unicode ]:
self.upper = pscheduler.si_as_number(upper)
else:
self.upper = upper
self.upper_str = str(upper)
def __init__(self, nrange):
"""Construct a range from a JSON NumericRange."""
# TODO: Would be nice if this class could treat missing
# lower/upper as -/+ infinity.
# TODO: Figure out why this can't just point to a NumericRange
valid, message = pscheduler.json_validate(nrange, {
"type": "object",
"properties": {
"lower": {"$ref": "#/pScheduler/Numeric"},
"upper": {"$ref": "#/pScheduler/Numeric"}
},
"additionalProperties": False,
"required": ["lower", "upper"]
})
if not valid:
raise ValueError("Invalid numeric range: %s" % message)
lower = nrange['lower']
if type(lower) in [str, unicode]:
self.lower = pscheduler.si_as_number(lower)
else:
self.lower = lower
self.lower_str = str(lower)
upper = nrange['upper']
if type(upper) in [str, unicode]:
self.upper = pscheduler.si_as_number(upper)
else:
self.upper = upper
self.upper_str = str(upper)
def __contains__(self, number):
"""See if the range contains the specified number, which can be any Numeric."""
if type(number) == float:
test_value = number
else:
test_value = pscheduler.si_as_number(number)
return self.lower <= test_value <= self.upper
def __contains__(self, number):
"""See if the range contains the specified number, which can be any Numeric."""
if type(number) == float:
test_value = number
else:
test_value = pscheduler.si_as_number(number)
return self.lower <= test_value <= self.upper
def parse_output(lines):
results = {}
results['succeeded'] = True
seen_header = False
streams = {}
dest_ip = None
dest_port = None
src_ip = None
src_port = None
for line in lines:
# ignore bogus sessions
if re.match('\(nan%\)', line):
results["succeeded"] = False
results["error"] = "Found NaN result"
break
if re.match('read failed: Connection refused', line):
results["succeeded"] = False
results["error"] = "Connection refused"
break
test = re.match(
'local ([^ ]+) port (\d+) connected with ([^ ]+) port (\d+)', line)
if test:
dest_ip = test.group(1)
dest_port = test.group(2)
src_ip = test.group(3)
src_port = test.group(4)
# Example lines
# TCP window size: 244 KByte (WARNING: requested 64.0 MByte)
# TCP window size: 19800 Byte (default)
test = re.match(
'TCP window size:\s+(\d+(\.\d+)?) (\S)?Byte(.*\(WARNING:\s+requested\s+(\d+(\.\d+)?) (\S)?Byte)?',
line)
if test:
window_size = test.group(1)
window_si = test.group(3)
request_size = test.group(5)
request_si = test.group(7)
if window_si:
window_size = pscheduler.si_as_number("%s%s" %
(window_size, window_si))
if request_size:
if request_si:
request_size = pscheduler.si_as_number(
"%s%s" % (request_size, request_si))
results["requested-tcp-window-size"] = int(request_size)
results["tcp-window-size"] = int(window_size)
# Example line
# [ 3] MSS size 1448 bytes (MTU 1500 bytes, ethernet)
test = re.match('.*MSS size (\d+) bytes \(MTU (\d+) bytes', line)
if test:
results['mss'] = int(test.group(1))
results['mtu'] = int(test.group(2))
stream_id = None
interval_start = None
throughput_bytes = None
si_bytes = None
throughput_bits = None
si_bits = None
jitter = None
lost = None
sent = None
# Example line
# [ 3] 16.0-17.0 sec 37355520 Bytes 298844160 bits/sec
test = re.match(
'\[\s*(\d+|SUM)\s*\]\s+([0-9\.]+)\s*\-\s*([0-9\.]+)\s+sec\s+(\d+(\.\d+)?)\s+(P|T|G|M|K)?Bytes\s+(\d+(\.\d+)?)\s+(P|T|G|M|K)?bits\/sec(\s+([0-9\.]+)\s+ms\s+(\d+)\/\s*(\d+)\s+)?',
line)
if test:
stream_id = test.group(1)
interval_start = float(test.group(2))
interval_end = float(test.group(3))
throughput_bytes = float(test.group(4))
si_bytes = test.group(6)
throughput_bits = float(test.group(7))
si_bits = test.group(9)
# these may or may not be present depending on versions
jitter = test.group(11)
lost = test.group(12)
send = test.group(13)
# If the output was in say GBytes convert back to regular Bytes for ease
# of things later
if si_bytes:
throughput_bytes = pscheduler.si_as_number(
"%s%s" % (throughput_bytes, si_bytes))
if si_bits:
throughput_bits = pscheduler.si_as_number(
"%s%s" % (throughput_bits, si_bits))
# if we found a matching line, we can add this info to our streams
if stream_id:
key = "%s-%s" % (interval_start, interval_end)
# TODO: This would appear to not create a summary when the
# duration is very short.
# there has to be a better way than this...
if interval_end - interval_start > 5:
key = "summary"
if key not in streams:
streams[key] = []
streams[key].append({
"jitter": jitter,
"lost": lost,
"sent": sent,
"throughput-bits": throughput_bits,
"throughput-bytes": throughput_bytes,
"start": interval_start,
"end": interval_end,
"stream-id": stream_id
})
if not streams:
results["succeeded"] = False
results["error"] = "No results found"
return results
summary_interval = None
intervals = []
for interval in streams:
summary_stream = None
interval_streams = []
# try to find the SUM if possible
for stream in streams[interval]:
if stream['stream-id'] == "SUM":
summary_stream = stream
else:
interval_streams.append(stream)
# if we couldn't find it, there was probably
# just the one line so use that
if not summary_stream and len(interval_streams) == 1:
summary_stream = interval_streams[0]
finalized = {"streams": interval_streams, "summary": summary_stream}
if interval == "summary":
summary_interval = finalized
else:
intervals.append(finalized)
logger.debug(intervals)
# sort according to start interval
intervals.sort(key=lambda x: x['summary']['start'])
results["intervals"] = intervals
results["summary"] = summary_interval
return results
def parse_output(lines):
results = {}
results['succeeded'] = True
intervals = []
summary_view = {}
current_interval_start = 0
for line in lines:
# Example line:
# 216.8125 MB / 1.00 sec = 1817.8571 Mbps 45 retrans 206 KB-cwnd
test = re.match(
'^.* (\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) retrans(\s*(\d+)\s*(\S)\S\-cwnd)?',
line)
if test:
spacing = int(test.group(1))
value = test.group(2)
si = test.group(4)
retrans = int(test.group(5))
cwnd = test.group(7)
cwnd_si = test.group(8)
value = pscheduler.si_as_number("%s%s" % (value, si))
cwnd = pscheduler.si_as_number("%s%s" % (cwnd, cwnd_si))
data = {
"start": current_interval_start,
"end": current_interval_start + spacing,
"stream-id":
1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"tcp-window-size": cwnd,
"retransmits": retrans
}
# since it doesn't report 1-2, 3-4, etc we have to keep track of where we are ourselves
current_interval_start += spacing
# in nuttcp there's only ever one reported and it's the summary so
# just double it up
intervals.append({"summary": data, "streams": [data]})
# Example UDP line
# 25.1572 MB / 1.00 sec = 211.0065 Mbps 62 / 25823 ~drop/pkt 0.24 ~%loss 4.8672 msMaxJitter
test = re.match(
'^.* (\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) / (\d+) ~drop/pkt\s*(\d+\.\d+) ~%loss\s*(\d+\.\d+) msMaxJitter',
line)
if test:
spacing = int(test.group(1))
value = test.group(2)
si = test.group(4)
lost = int(test.group(5))
sent = int(test.group(6))
loss = test.group(7)
jitter = float(test.group(8))
value = pscheduler.si_as_number("%s%s" % (value, si))
data = {
"start": current_interval_start,
"end": current_interval_start + spacing,
"stream-id":
1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"sent": sent,
"lost": lost,
"jitter": jitter
}
# since it doesn't report 1-2, 3-4, etc we have to keep track of where we are ourselves
current_interval_start += spacing
# in nuttcp there's only ever one reported and it's the summary so
# just double it up
intervals.append({"summary": data, "streams": [data]})
# Example summary line:
# 2197.0657 MB / 10.00 sec = 1842.3790 Mbps 8 %TX 90 %RX 90 retrans 237 KB-cwnd 0.50 msRTT
test = re.match(
'^.* (\d+)\.\d+ sec =\s*(\d+(\.\d+)?) (\S)bps \d+ %TX \d+ %RX (\d+) retrans(\s*(\d+)\s*(\S)\S\-cwnd)?',
line)
if test:
duration = int(test.group(1))
value = test.group(2)
si = test.group(4)
retrans = int(test.group(5))
cwnd = test.group(7)
cwnd_si = test.group(8)
value = pscheduler.si_as_number("%s%s" % (value, si))
cwnd = pscheduler.si_as_number("%s%s" % (cwnd, cwnd_si))
summary_view = {
"start": 0,
"end": duration,
"stream-id":
1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"tcp-window-size": cwnd,
"retransmits": retrans
}
# Example UDP summary line
# 252.0586 MB / 10.00 sec = 211.4462 Mbps 99 %TX 50 %RX 1485 / 259593 drop/pkt 0.57 %loss 37.2012 msMaxJitter
test = re.match(
'^.* (\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) %TX (\d+) %RX (\d+) / (\d+) drop/pkt\s*(\d+\.\d+) %loss\s*(\d+\.\d+) msMaxJitter',
line)
if test:
duration = int(test.group(1))
value = test.group(2)
si = test.group(4)
lost = int(test.group(7))
sent = int(test.group(8))
loss = test.group(9)
jitter = float(test.group(10))
value = pscheduler.si_as_number("%s%s" % (value, si))
summary_view = {
"start": 0,
"end": duration,
"stream-id":
1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"sent": sent,
"lost": lost,
"jitter": jitter
}
results["intervals"] = intervals
results["summary"] = {"summary": summary_view, "streams": [summary_view]}
return results
def parse_output(lines):
results = {}
results['succeeded'] = True
intervals = []
summary_view = {}
current_interval_start = 0
for line in lines:
# Example line:
# 216.8125 MB / 1.00 sec = 1817.8571 Mbps 45 retrans 206 KB-cwnd
test = re.match('^.*(\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) retrans(\s*(\d+)\s*(\S)\S\-cwnd)?', line)
if test:
spacing = int(test.group(1))
value = test.group(2)
si = test.group(4)
retrans = int(test.group(5))
cwnd = test.group(7)
cwnd_si = test.group(8)
value = pscheduler.si_as_number("%s%s" % (value, si))
cwnd = pscheduler.si_as_number("%s%s" % (cwnd, cwnd_si))
data = {
"start": current_interval_start,
"end": current_interval_start + spacing,
"stream-id": 1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"tcp-window-size": cwnd,
"retransmits": retrans
}
# since it doesn't report 1-2, 3-4, etc we have to keep track of where we are ourselves
current_interval_start += spacing
# in nuttcp there's only ever one reported and it's the summary so
# just double it up
intervals.append({"summary": data,
"streams": [data]})
# Example UDP line
# 25.1572 MB / 1.00 sec = 211.0065 Mbps 62 / 25823 ~drop/pkt 0.24 ~%loss 4.8672 msMaxJitter
test = re.match('^.*(\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) / (\d+) ~drop/pkt\s*(\d+\.\d+) ~%loss\s*(\d+\.\d+) msMaxJitter', line)
if test:
spacing = int(test.group(1))
value = test.group(2)
si = test.group(4)
lost = int(test.group(5))
sent = int(test.group(6))
loss = test.group(7)
jitter = float(test.group(8))
value = pscheduler.si_as_number("%s%s" % (value, si))
data = {
"start": current_interval_start,
"end": current_interval_start + spacing,
"stream-id": 1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"sent": sent,
"lost": lost,
"jitter": jitter
}
# since it doesn't report 1-2, 3-4, etc we have to keep track of where we are ourselves
current_interval_start += spacing
# in nuttcp there's only ever one reported and it's the summary so
# just double it up
intervals.append({"summary": data,
"streams": [data]})
# Example summary line:
# 2197.0657 MB / 10.00 sec = 1842.3790 Mbps 8 %TX 90 %RX 90 retrans 237 KB-cwnd 0.50 msRTT
test = re.match('^.*(\d+)\.\d+ sec = (\d+(\.\d+)?) (\S)bps \d+ %TX \d+ %RX (\d+) retrans(\s*(\d+)\s*(\S)\S\-cwnd)?', line)
if test:
duration = int(test.group(1))
value = test.group(2)
si = test.group(4)
retrans = int(test.group(5))
cwnd = test.group(7)
cwnd_si = test.group(8)
value = pscheduler.si_as_number("%s%s" % (value, si))
cwnd = pscheduler.si_as_number("%s%s" % (cwnd, cwnd_si))
summary_view = {
"start": 0,
"end": duration,
"stream-id": 1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"tcp-window-size": cwnd,
"retransmits": retrans
}
# Example UDP summary line
# 252.0586 MB / 10.00 sec = 211.4462 Mbps 99 %TX 50 %RX 1485 / 259593 drop/pkt 0.57 %loss 37.2012 msMaxJitter
test = re.match('^.*(\d+)\.\d+ sec \=\s*(\d+(\.\d+)?) (\S)bps\s*(\d+) %TX (\d+) %RX (\d+) / (\d+) drop/pkt\s*(\d+\.\d+) %loss\s*(\d+\.\d+) msMaxJitter', line)
if test:
duration = int(test.group(1))
value = test.group(2)
si = test.group(4)
lost = int(test.group(5))
sent = int(test.group(6))
loss = test.group(7)
jitter = float(test.group(8))
value = pscheduler.si_as_number("%s%s" % (value, si))
summary_view = {
"start": 0,
"end": duration,
"stream-id": 1, # nuttcp won't report separate streams as best as I can tell, so just fudge it
"throughput-bits": value,
"sent": sent,
"lost": lost,
"jitter": jitter
}
results["intervals"] = intervals
results["summary"] = {"summary": summary_view,
"streams": [summary_view]}
return results
def parse_output(lines):
results = {}
results['succeeded'] = True
seen_header = False
streams = {}
dest_ip = None
dest_port = None
src_ip = None
src_port = None
for line in lines:
# ignore bogus sessions
if re.match('\(nan%\)', line):
results["succeeded"] = False
results["error"] = "Found NaN result";
break;
if re.match('read failed: Connection refused', line):
results["succeeded"] = False
results["error"] = "Connection refused"
break
test = re.match('local ([^ ]+) port (\d+) connected with ([^ ]+) port (\d+)', line)
if test:
dest_ip = test.group(1)
dest_port = test.group(2)
src_ip = test.group(3)
src_port = test.group(4)
# Example lines
# TCP window size: 244 KByte (WARNING: requested 64.0 MByte)
# TCP window size: 19800 Byte (default)
test = re.match('TCP window size:\s+(\d+(\.\d+)?) (\S)?Byte(.*\(WARNING:\s+requested\s+(\d+(\.\d+)?) (\S)?Byte)?', line)
if test:
window_size = test.group(1)
window_si = test.group(3)
request_size = test.group(5)
request_si = test.group(7)
if window_si:
window_size = pscheduler.si_as_number("%s%s" % (window_size, window_si))
if request_size:
if request_si:
request_size = pscheduler.si_as_number("%s%s" % (request_size, request_si))
results["requested-tcp-window-size"] = int(request_size)
results["tcp-window-size"] = int(window_size)
# Example line
# [ 3] MSS size 1448 bytes (MTU 1500 bytes, ethernet)
test = re.match('.*MSS size (\d+) bytes \(MTU (\d+) bytes', line)
if test:
results['mss'] = int(test.group(1))
results['mtu'] = int(test.group(2))
stream_id = None
interval_start = None
throughput_bytes = None
si_bytes = None
throughput_bits = None
si_bits = None
jitter = None
lost = None
sent = None
# Example line
# [ 3] 16.0-17.0 sec 37355520 Bytes 298844160 bits/sec
test = re.match('\[\s*(\d+|SUM)\s*\]\s+([0-9\.]+)\s*\-\s*([0-9\.]+)\s+sec\s+(\d+(\.\d+)?)\s+(P|T|G|M|K)?Bytes\s+(\d+(\.\d+)?)\s+(P|T|G|M|K)?bits\/sec(\s+([0-9\.]+)\s+ms\s+(\d+)\/\s*(\d+)\s+)?', line)
if test:
stream_id = test.group(1)
interval_start = float(test.group(2))
interval_end = float(test.group(3))
throughput_bytes = float(test.group(4))
si_bytes = test.group(6)
throughput_bits = float(test.group(7))
si_bits = test.group(9)
# these may or may not be present depending on versions
jitter = test.group(11)
lost = test.group(12)
send = test.group(13)
# If the output was in say GBytes convert back to regular Bytes for ease
# of things later
if si_bytes:
throughput_bytes = pscheduler.si_as_number("%s%s" % (throughput_bytes, si_bytes))
if si_bits:
throughput_bits = pscheduler.si_as_number("%s%s" % (throughput_bits, si_bits))
# if we found a matching line, we can add this info to our streams
if stream_id:
key = "%s-%s" % (interval_start, interval_end)
# there has to be a better way than this...
if interval_end - interval_start > 5:
key = "summary"
if not streams.has_key(key):
streams[key] = []
streams[key].append({"jitter": jitter,
"lost": lost,
"sent": sent,
"throughput-bits": throughput_bits,
"throughput-bytes": throughput_bytes,
"start": interval_start,
"end": interval_end,
"stream-id": stream_id})
if len(streams.keys()) == 0:
results["succeeded"] = False
results["error"] = "No results found"
return results
summary_interval = None
intervals = []
for interval in streams.keys():
summary_stream = None
interval_streams = []
# try to find the SUM if possible
for stream in streams[interval]:
if stream['stream-id'] == "SUM":
summary_stream = stream
else:
interval_streams.append(stream)
# if we couldn't find it, there was probably
# just the one line so use that
if not summary_stream and len(interval_streams) == 1:
summary_stream = interval_streams[0]
finalized = {
"streams": interval_streams,
"summary": summary_stream
}
if interval == "summary":
summary_interval = finalized
else:
intervals.append(finalized)
logger.debug(intervals)
# sort according to start interval
intervals.sort(key = lambda x: x['summary']['start'])
results["intervals"] = intervals
results["summary"] = summary_interval
return results
