def _gen_rfcs_block():
optimize_pb = pb.PulseBlock()
optimize_pb.insert(p_obj=po.PTrue(ch='aom', dur=1e-6))
optimize_pb.insert(p_obj=po.PTrue(ch='mw_gate', dur=1e-6))
optimize_pb.dflt_dict = dict(aom=po.DTrue(), mw_gate=po.DTrue())
return optimize_pb
def _gen_p_block(self, safety_window=200e-9):
# ========== Prepare individual blocks =========
# ------- pre_init_pb --------
# Long optical pumping before first pulse
pre_init_pb = pb.PulseBlock(p_obj_list=[po.PTrue(ch='aom', dur=3e-6)])
# ------- all_off_pb --------
# Switch all channels off after the full pulse sequence
all_off_pb = pb.PulseBlock(p_obj_list=[
po.PFalse(ch='aom', dur=1e-6),
po.PFalse(ch='mw_gate', dur=1e-6),
po.PFalse(ch='ctr_gate', dur=1e-6)
])
# ========== Construct full rabi_pb =========
rabi_pb = pb.PulseBlock(name='RabiPB')
# Pre-init block
rabi_pb.insert_pb(pb_obj=pre_init_pb)
# rabi_element ** n_pts
for tau in self.tau_ar:
rabi_pb.append_pb(pb_obj=self._gen_rabi_elem(
tau=tau, safety_window=safety_window))
# All-off block
rabi_pb.append_pb(pb_obj=all_off_pb)
# Default values
rabi_pb.dflt_dict = dict(aom=po.DFalse(),
ctr_gate=po.DFalse(),
mw_gate=po.DFalse())
# Correct for aom delay
rabi_pb.add_offset(offset_dict=dict(aom=-self._aom_delay))
# Duration of full RabiPB
# [for gated_ctr.get_count_ar() timeout]
self._rabi_pb_dur = rabi_pb.dur
return rabi_pb
def _gen_rfcs_block():
optimize_pb = pb.PulseBlock(
p_obj_list=[
po.PTrue(ch='aom', dur=1e-6)
],
dflt_dict=dict(aom=po.DTrue())
)
return optimize_pb
def _gen_p_block(self):
count_trace_pb = pb.PulseBlock()
# Sample clock
t_step = (self._l_margin + self._laser_dur + self._r_margin) / self._n_pts
for idx in range(self._n_pts):
count_trace_pb.append(
p_obj=po.PTrue(
ch='ctr_gate',
dur=t_step / 2,
t0=t_step / 2
)
)
# Laser pulse
count_trace_pb.insert(
p_obj=po.PTrue(
ch='aom',
dur=self._laser_dur,
t0=self._l_margin
)
)
# Relaxation period and all off pulse block
count_trace_pb.append(
p_obj=po.PFalse(
ch='aom',
dur=t_step,
t0=self._relax
)
)
count_trace_pb.append(
p_obj=po.PFalse(
ch='ctr_gate',
dur=t_step,
)
)
# Duration of full PB
# [for gated_ctr.get_count_ar() timeout]
self._pb_dur = count_trace_pb.dur
# Default value
count_trace_pb.dflt_dict = dict(
aom=po.DFalse(),
ctr_gate=po.DFalse()
)
return count_trace_pb
def pb_expand_test(res_dict, indicate_bounds=True):
""" Helper method to test pb_zip()
This method takes direct output res_dict of pb_zip() call and reconstructs
the original pulse block according to the sequence.
To visualize boundaries between individual sequence elements, set optional
indicate_bounds parameter to True. This will add zero-length divider pulses
on one of the channels.
:param res_dict: (dict) return of pb_zip() call to be reconstructed back
into a plain waveform.
:param indicate_bounds: (bool) if True, divider pulses will be added to one
of the channels after each individual waveform.
:return: (PulseBlock) reconstructed plain waveform
"""
import pulseblock.pulse as po
new_pb = pb.PulseBlock()
seq_list = res_dict['seq_list']
snip_list = res_dict['snip_list']
for snip_idx in range(len(seq_list)):
snip_name, rep_num = seq_list[snip_idx]
for rep_idx in range(rep_num):
# Find wfm_snip corresponding to snip_name
wfm_snip = None
for wfm_snip in snip_list:
if wfm_snip.name == snip_name:
break
new_pb.append_pb(pb_obj=wfm_snip)
# Add a marker to indicate the block boundary
if indicate_bounds:
mrk_ch = list(wfm_snip.dflt_dict.keys())[0]
new_pb.append(p_obj=po.PTrue(ch=mrk_ch, dur=0), cflct_er=False)
return new_pb
def _gen_rabi_elem(tau=0, safety_window=200e-9):
rabi_elem = pb.PulseBlock()
# Init green_aom pulse
rabi_elem.insert(p_obj=po.PTrue(ch='aom', dur=2e-6 +
2 * safety_window))
# Normalization pulse
rabi_elem.insert(p_obj=po.PTrue(ch='ctr_gate', t0=1.5e-6, dur=0.5e-6))
# mw pulse
rabi_elem.append(
p_obj=po.PTrue(ch='mw_gate', dur=tau, t0=4 * safety_window))
tmp_dur = rabi_elem.dur + 4 * safety_window
# Readout AOM pulse
rabi_elem.insert(p_obj=po.PTrue(ch='aom', dur=1e-6, t0=tmp_dur))
# readout ctr_gate pulse
rabi_elem.insert(p_obj=po.PTrue(ch='ctr_gate', dur=0.5e-6, t0=tmp_dur))
return rabi_elem
def pb_zip(pb_obj, dur_quant):
""" Collapse default (wait) periods into repetitions of a single wait block.
This method takes a plain PulseBlock and returns a sequence table and a list
of individual waveforms (snippets).
Corresponding pulse sequence reproduces the original waveform but with long
wait periods replaced by multiple repetitions of the same short wait element
for saving hardware memory (collapsing or zipping of a waveform).
:param pb_obj: PulseObject instance - original pulse block to be collapsed
:param dur_quant: (float) minimal waveform duration allowed by the hardware
memory (in the same units as used in pb_obj).
This value is normally determined as
min_wfm_size / sampling_rate,
where min_wfm_size is the minimal size of a sample array in hardware memory.
The repeated wait waveform will have this size.
:return: (dict)
{
'seq_list': list of tuples ('wfm_name', repetition_number) - chronological
sequence of (name of the wfm snippet, how many times it should be repeated)
'snip_list': list of PulseBlock objects - 'snippets' of the original pb_obj,
which form the sequence according to seq_list
Naming convention:
pb_obj.name + '_wait' for the repeated wait wfm
pb_obj.name + '_' + 'snip number {0, 1, ...}' for non-repeated snippets
Order: wait is the first element, non-repeated snippets go next in
chronological order.
}
"""
# Non-default intervals ---------------------------------------------------
# find all time intervals covered by non-default pulses
p_interval_list = []
for ch in pb_obj.p_dict.keys():
for pulse in pb_obj.p_dict[ch]:
p_interval_list.append((pulse.t0, pulse.t0 + pulse.dur))
# merge all overlapping pulse intervals
p_interval_list = merge_intervals(i_list=p_interval_list)
# Step usage dictionary ---------------------------------------------------
# Now one knows all the wait periods witch can be collapsed
# (full duration of pb_obj minus all pulse intervals)
#
# But both the wait waveform and non-trivial pulse waveforms have to
# meet the length constraint: dur_quant + n*dur_step. That is why it is
# not trivial to split full duration into repetitions of wait element and
# non-default waveforms.
#
# Here one uses the easiest (perhaps not the most efficient) way to meet
# these restrictions:
# - divide the entire duration of pb_obj into discrete steps of dur_quant
# - construct dur_quant-long wait waveform
# - if a given step does not contain any pulses (or any parts of pulses),
# it will be replaced by a repetiotion of wait wfm
# - if one or several adjacent steps contain non-default pulses, they are
# merged and output as a single pulse block
# - last integer dur_quant is merged with the reminder (shorter than dur_quant)
# and is returned as a single pulse block (because the reminder is shorter
# than minimal waveform length and cannot be sampled alone)
# Number of whole dur_quant, fitting into pb_obj.dur
quant_num = int(pb_obj.dur // dur_quant)
# Use array:
# False - this dur_quant is a wait period
# True - this dur_quant is a part of pulse interval
use_ar = np.full(shape=quant_num, fill_value=False)
# Determine which steps contain non-default pulses
for p_interval in p_interval_list:
left_idx = int(p_interval[0] // dur_quant)
right_idx = int(p_interval[1] // dur_quant)
# Handle left-most interval
# If p_interval[0] == 0.0, integer division by dur_quant
# may accidentally evaluate to -1.0
if left_idx < 0:
left_idx = 0
# Handle right-most intervals
if left_idx == quant_num - 1 or left_idx == quant_num:
# The entire interval fits into the 'default-True' area
# [(quant_num - 1)-st element and reminder], so no change
# has to be made in use_ar
continue
elif right_idx == quant_num:
# The left edge of the interval is outside of the 'default-True'
# area [(quant_num - 1)-st elem and reminder], but the right edge
# is in the reminder. The pulse might introduce non-trivial change
# into use_ar, but right_idx is currently out of range.
#
# Reduce it to the max available index to avoid out-of-range and
# broadcasting errors:
right_idx = quant_num - 1
use_ar[left_idx:right_idx + 1] = np.full(shape=right_idx - left_idx +
1,
fill_value=True)
# Last integer step of dur_quant must be considered as non-wait
# (to be merged and sampled with the reminder, which is shorter
# than the hardware minimum)
use_ar[-1] = True
# Find periods of pulses / repeating wait (perform 'run-length encoding'):
# The return is a period dictionary:
# {
# 'val_ar': True or False - this run of steps is non-default or wait
# 'len_ar': number of dur_quant steps within each run
# 'start_ar': starting index of each run
# }
period_dict = run_len_encode(in_ar=use_ar)
# Final sequence table and PulseBlock dictionary --------------------------
final_snip_list = []
final_seq_list = []
# Construct 'wait' PulseBlock
wait_pb_name = pb_obj.name + '_wait'
wait_pb = pb.PulseBlock(name=wait_pb_name)
wait_pb.dur = dur_quant
wait_pb.dflt_dict = copy.deepcopy(pb_obj.dflt_dict)
final_snip_list.append(wait_pb)
# Iterate through all pulse runs, take 'snippet pulse blocks',
# and construct sequence table
# The last run (must be non-wait) will be extended to include the reminder
last_period_idx = len(period_dict['val_ar']) - 1
# This counter is used to keep track of PulseBlock names
pb_name_idx = 0
for period_idx, period_val in enumerate(period_dict['val_ar']):
# Pulse period
if period_val:
# Take a snippet of this pulse period
tmp_pb_name = pb_obj.name + '_{}'.format(pb_name_idx)
# Snippet edges
start_t = period_dict['start_ar'][period_idx] * dur_quant
if period_idx < last_period_idx:
# pulse period in the bulk - take the snippet by the period edges
stop_t = (period_dict['start_ar'][period_idx] +
period_dict['len_ar'][period_idx]) * dur_quant
else:
# right-most pulse period must be extended to include the reminder
stop_t = pb_obj.dur
tmp_pb = pb_snip(pb_obj=pb_obj,
start_t=start_t,
stop_t=stop_t,
snip_name=tmp_pb_name,
use_centers=True)
# Add the snippet to the PulseBlock list
final_snip_list.append(tmp_pb)
# Add corresponding entry to the sequence table:
# output tmp_pb_name once
final_seq_list.append((tmp_pb_name, 1))
# Increment name index for the next PulseBlock
pb_name_idx += 1
# Wait period
else:
# Only add an entry to the sequence table:
# output 'wait waveform n times'
final_seq_list.append(
(wait_pb_name, period_dict['len_ar'][period_idx]))
return {'seq_list': final_seq_list, 'snip_list': final_snip_list}
def pb_snip(pb_obj, start_t, stop_t, snip_name=None, use_centers=False):
""" PulseBlock snipping tool
Copies all default values and all pulse objects between the snippet edges
with preserved order and spacing between them.
The start_t and stop_t edges are the origin and the end of the returned
PulseBlock object.
Note that snippet edge must not cross any pulse object (but can touch it).
If any edge crosses any pulse object, ValueError exception is produced.
Assumptions:
- pulse objects are ascending-time-ordered within pb_obj.p_dict[ch_name]
- all pulse objects have non-zero duration. The algorithm will still work
for a zero-duration pulse, but it might be ether left out or included
into the snippet unpredictably, if it touches the edges star_t or stop_t.
:param pb_obj: original PulseBlock
:param start_t: (float) left snippet edge
:param stop_t: (float) right snippet edge
:param snip_name: (str, optional) name for the new PulseBlock object
If not given, pb_obj.name + '_snip' is used.
:param use_centers: (bool) if False, belonging of a pulse to the snippet
is determined by edges. If True - by position of the pulse central point
:return: new PulseBlock object -
snippet of pb_obj between start_t and stop_t
Exception is produced in the case of error.
"""
# New PulseBlock to be filled and returned
new_pb = pb.PulseBlock()
new_pb.dur = stop_t - start_t
if snip_name is not None:
new_pb.name = snip_name
else:
new_pb.name = pb_obj.name + '_snip'
# Copy all default pulses
new_pb.dflt_dict = copy.deepcopy(pb_obj.dflt_dict)
# Copy all pulses falling in between start_t and stop_t
for ch in pb_obj.p_dict.keys():
for pulse in pb_obj.p_dict[ch]:
# Assumption: pulses in pb_obj.p_dict[ch] are time-ordered
# Assumption: all pulses have dur > 0.
# The algorithm will also work for a pulse of dur = 0,
# but such pulse might be left out or included unpredictably,
# if it touches the window edges star_t or stop_t.
# Two ways to determine belonging of a block to the snippet:
#
# 1) whether the center of a pulse falls into [start_t, stop_t]
# interval.
# Pros: robust against float-comparison errors if the pulse
# touches snippet edge.
# Cons: This method does not detect the cases when snippet
# edges go across a pulse block.
#
# 2) whether both edges of a pulse fall into [start_t, stop_t]
# Pros: checks for snippet edges crossing the pulse
# Cons: may unpredictably produce exceptions if one of the pulses
# touches snippet edge (due to unpredictable comparison result
# for two nominally identical floats)
# Method 1: use pulse center
if use_centers:
pulse_center = pulse.t0 + pulse.dur / 2
if pulse_center <= start_t:
# pulse is fully to the left from snip window
continue
elif start_t <= pulse_center <= stop_t:
# pulse is fully inside the snip window
if ch not in new_pb.p_dict.keys():
# the first time the pulse is added to this channel
new_pb.p_dict[ch] = []
pulse_copy = copy.deepcopy(pulse)
pulse_copy.t0 -= start_t
new_pb.p_dict[ch].append(pulse_copy)
else:
# This pulse and all subsequent ones lie to the right
# from the snip window
break
# Method 2: use pulse edges
else:
if pulse.t0 + pulse.dur <= start_t:
# pulse is fully to the left from snip window
continue
elif start_t <= pulse.t0 and pulse.t0 + pulse.dur <= stop_t:
# pulse is fully inside the snip window
if ch not in new_pb.p_dict.keys():
# the first time the pulse is added to this channel
new_pb.p_dict[ch] = []
pulse_copy = copy.deepcopy(pulse)
pulse_copy.t0 -= start_t
new_pb.p_dict[ch].append(pulse_copy)
elif stop_t <= pulse.t0:
# This pulse and all subsequent ones lie to the right
# from the snip window
break
# The window edge goes across one of the pulse objects.
# Since it is not clear what to do with such a pulse,
# one has to raise an exception.
# Alternatively, it might be some unexpected comparison error.
else:
# Determine the conflicting edge
if pulse.t0 < start_t < pulse.t0 + pulse.dur:
edge_type = 'start_t'
edge_t = start_t
elif pulse.t0 < stop_t < pulse.t0 + pulse.dur:
edge_type = 'stop_t'
edge_t = stop_t
# Something completely unexpected:
# if it were just a crossing with an edge,
# one of the above conditions should have been satisfied.
# Hence, this part is reached only in the case of some
# unexpected error.
#
# Just raise an exception and provide all the information
else:
raise ValueError(
'pb_snip(): condition check failed: \n'
' pulse_obj = {} \n'
' t0 = {} \n'
' dur = {} \n'
' start_t = {} \n'
' stop_t = {}'
''.format(pulse, pulse.t0, pulse.dur, start_t,
stop_t))
raise ValueError(
'pb_snip(): snip edge goes across a pulse object \n'
' channel = {} \n'
' t0 = {} \n'
' t0+dur = {} \n'
' pulse object = {} \n'
' conflicting edge = {} \n'
' edge position = {}'
''.format(ch, pulse.t0, pulse.t0 + pulse.dur,
str(pulse), edge_type, edge_t))
return new_pb
def _gen_p_block(self, debug=False):
# Technical params
# safety window between mw_src makes a step and
# before counter starts accumulation of counts
safety_window = 0.1 * self._accum_dur
# Duration of sweep-step pulse
step_pulse_dur = 0.1 * self._accum_dur # 200e-6
# ========== Prepare individual blocks =========
# ------- first_pb --------
# First point in the sweep:
# mw_src should reset sweep position to start_f,
# so there is no need to send step_trig pulse
first_pb = pb.PulseBlock()
# long safety window in the beginning
first_pb.insert(p_obj=po.PFalse(ch='ctr_gate', dur=self._accum_dur))
# first ctr_gate pulse
first_pb.append(p_obj=po.PTrue(ch='ctr_gate', dur=self._accum_dur))
# ------- step_pb --------
# This pb is repeated for every subsequent sweep step:
# send ctr_trig pulse, wait for a safety window and
# start accumulating pulses
step_pb = pb.PulseBlock()
# step pulse to mw_src
step_pb.insert(p_obj=po.PTrue(ch='mw_step', dur=step_pulse_dur))
# ctr_gate pulse
step_pb.append(p_obj=po.PTrue(
ch='ctr_gate', dur=self._accum_dur, t0=safety_window))
# ------- off_pb --------
# Once sweep is complete, set all outputs to low
off_pb = pb.PulseBlock()
off_pb.insert(p_obj=po.PFalse(ch='aom', dur=safety_window))
off_pb.insert(p_obj=po.PFalse(ch='mw_gate', dur=safety_window))
off_pb.insert(p_obj=po.PFalse(ch='mw_step', dur=safety_window))
off_pb.insert(p_obj=po.PFalse(ch='ctr_gate', dur=safety_window))
# ========== Construct full odmr_pb =========
odmr_pb = pb.PulseBlock(name='ODMRPulseBlock')
# Default values
odmr_pb.dflt_dict = dict(
aom=po.DFalse(),
ctr_gate=po.DFalse(),
mw_gate=po.DFalse(),
mw_step=po.DFalse(),
)
# first_bp
odmr_pb.insert_pb(pb_obj=first_pb)
# append step_bp ** (_n_pts-1)
for _ in np.arange(start=1, stop=self._n_pts):
odmr_pb.append_pb(pb_obj=step_pb)
# aom and mw_gate are High during the whole block
tmp_dur = odmr_pb.dur
odmr_pb.insert(p_obj=po.PTrue(ch='aom', dur=tmp_dur))
odmr_pb.insert(p_obj=po.PTrue(ch='mw_gate', dur=tmp_dur))
# append off_pb
odmr_pb.append_pb(pb_obj=off_pb)
if debug:
return dict(first_pb=first_pb,
step_pb=step_pb,
off_pb=off_pb,
odmr_pb=odmr_pb)
else:
return odmr_pb