def test1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure(
nb_channel = 10,
sampling_rate =1000.,
buffer_length = 10.,
packet_size = 128,
)
dev.initialize()
dev.start()
# Create and starts receiver with multuprocessing
stream0 = dev.streams[0]
stop_recv = mp.Value('i', 0)
process = mp.Process(target= test_recv_loop, args = (stream0['port'],stop_recv))
process.start()
time.sleep(10.)
stop_recv.value = 1
process.join()
# Stop and release the device
dev.stop()
dev.close()
def test1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure(
nb_channel = 32,
sampling_rate =1000.,
buffer_length = 64.,
packet_size = 16,
)
dev.initialize()
dev.start()
app = QtGui.QApplication([])
w1=Oscilloscope(stream = dev.streams[0])
w1.set_params(refresh_interval = 40,
xsize = 2.)
w1.auto_gain_and_offset(mode = 2)
w1.show()
w2 = TimeFreq(stream = dev.streams[0], max_visible_on_open = 4)
w2.set_params(refresh_interval = 40,
xsize = 2., nb_column = 1)
w2.show()
app.exec_()
# Stope and release the device
dev.stop()
dev.close()
class Fake_TeleMir_Calibration:
def __init__(self, precomputed):
self.streamhandler = StreamHandler()
# Configure and start
self.dev = FakeMultiSignals(streamhandler = self.streamhandler)
self.dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
self.dev.initialize()
self.dev.start()
# Impedances
self.w_imp=Topoplot_imp(stream = self.dev.streams[0], type_Topo = 'imp')
self.w_imp.show()
def close(self):
#close window
self.w_imp.close()
# Stope and release the device
self.dev.stop()
self.dev.close()
def test1():
streamhandler = StreamHandler()
filename = 'cerveau_alex.raw'
precomputed = np.fromfile(filename , dtype = np.float32).reshape(-1, 14).transpose()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
dev.initialize()
dev.start()
app = QtGui.QApplication([])
w1=Oscilloscope(stream = dev.streams[0])
w1.show()
w1.auto_gain_and_offset(mode = 1)
w1.set_params(xsize = 10.)
app.exec_()
# Stope and release the device
dev.stop()
dev.close()
def trigger_analog1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 32,
sampling_rate =1000.,
buffer_length = 64,
packet_size = 100,
last_channel_is_trig = True,
)
dev.initialize()
dev.start()
def print_pos(pos):
print pos
trigger = AnalogTrigger(stream = dev.streams[0],
threshold = 0.25,
front = '+',
channel = dev.nb_channel-1,
#~ debounce_mode = 'no-debounce',
debounce_mode = 'after-stable',
#~ debounce_mode = 'before-stable',
debounce_time = 0.05,
callbacks = [ print_pos, ]
)
app = QtGui.QApplication([])
w1=Oscilloscope(stream = dev.streams[0])
w1.show()
visibles = np.ones(dev.nb_channel, dtype = bool)
visibles[4:] = False
w1.set_params(xsize = 4.7,
mode = 'scan',
visibles = visibles)
time.sleep(.5)
w1.auto_gain_and_offset(mode = 2)
app.exec_()
print 1
# Stope and release the device
trigger.stop()
print 2
dev.stop()
print 3
dev.close()
print 4
def run_test():
streamhandler = StreamHandler()
## Configure and start acquisition stream
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 10.,
packet_size = 1,
)
dev.initialize()
dev.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure( name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 21,
nb_pts = 128,
sampling_rate =62.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0]) # Could take multistreams ?
fout.start()
## Create and starts recevers with multuprocessing for stream in and stream out
stream_in = dev.streams[0]
stream_out = fout.streams[0]
stop_recv = mp.Value('i', 0)
process_in = mp.Process(target= test_recv_loop, args = (stream_in['port'],stop_recv))
process_out = mp.Process(target= test_recv_loop, args = (stream_out['port'],stop_recv))
process_in.start()
process_out.start()
time.sleep(0.5)
stop_recv.value = 1
## Stop and release devices
fout.stop()
fout.close()
dev.stop()
dev.close()
print 'fout and dev devises closed'
process_in.join(1) # join method blocante
print 'process in clear'
process_out.join(1)
print 'process out clear'
def test1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 32,
sampling_rate =1000.,
buffer_length = 64,
packet_size = 100,
last_channel_is_trig = True,
)
dev.initialize()
dev.start()
def print_pos(pos):
print pos
def print_new_chunk(n):
print 'new stackedchunk', n
stackedchunk = StackedChunkOnTrigger(stream = dev.streams[0],
stack_size = 20,
left_sweep = 0.1,
right_sweep = 0.1,
)
stackedchunk.new_chunk.connect(print_new_chunk)
trigger = AnalogTrigger(stream = dev.streams[0],
threshold = 0.25,
front = '+',
channel = dev.nb_channel-1,
#~ debounce_mode = 'no-debounce',
debounce_mode = 'after-stable',
#~ debounce_mode = 'before-stable',
debounce_time = 0.05,
callbacks = [ print_pos, stackedchunk.on_trigger]
)
app = QtGui.QApplication([])
time.sleep(.5)
app.exec_()
# Stope and release the device
trigger.stop()
dev.stop()
dev.close()
def test1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure(
#~ nb_channel = 16,
#~ sampling_rate =1000.,
#~ buffer_length = 64,
#~ packet_size = 100,
nb_channel = 8,
sampling_rate =10000.,
buffer_length = 64,
packet_size = 100,
last_channel_is_trig = True,
)
dev.initialize()
print dev.streams[0]
print dev.streams[0]['port']
dev.start()
app = QtGui.QApplication([])
w1=TriggeredOscilloscope(stream = dev.streams[0])
w1.set_params(channel = dev.nb_channel-1,
left_sweep = -.1,
right_sweep = +.3,
threshold = .25,
#~ debounce_mode = 'no-debounce',
debounce_mode = 'after-stable',
#~ debounce_mode = 'before-stable',
debounce_time = 0.05,
)
w1.show()
w2=Oscilloscope(stream = dev.streams[0])
w2.show()
w2.auto_gain_and_offset(mode = 0)
w2.set_params(xsize = 5, mode = 'scroll')
app.exec_()
w1.stop()
# Stope and release the device
dev.stop()
dev.close()
def run_test():
streamhandler = StreamHandler()
## Configure and start acquisition stream
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 10.,
packet_size = 1,
)
dev.initialize()
dev.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 21,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0])
fout.start()
app = QtGui.QApplication([])
w_in=Oscilloscope(stream = dev.streams[0])
w_in.show()
w_out=Oscilloscope(stream = fout.streams[0])
w_out.show()
app.exec_()
## Stop and release devices
fout.stop()
fout.close()
dev.stop()
dev.close()
print 'fout and dev devises closed'
def test1():
streamserver = StreamServer()
dev = FakeMultiSignals(streamhandler = streamserver)
dev.configure()
dev.initialize()
dev.start()
print streamserver.get_stream_list()
time.sleep(1.)
streamhandlerproxy = StreamHandlerProxy()
print streamhandlerproxy.get_stream_list()
dev.stop()
dev.close()
streamserver.stop()
def test1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( nb_channel = 16,
sampling_rate =1000.,
buffer_length = 64,
packet_size = 10,
)
dev.initialize()
print dev.streams[0]
print dev.streams[0]['port']
dev.start()
app = QtGui.QApplication([])
w1=Oscilloscope(stream = dev.streams[0])
w1.show()
#~ w1.auto_gain_and_offset(mode = 2)
#~ visibles = np.ones(16, dtype = bool)
#~ visibles[4:] = False
#~ w1.set_params(xsize = 1.,
#~ mode = 'scan',
#~ visibles = visibles)
#~ print w1.get_params()
w1.set_params(**w1.get_params())
#~ w2=Oscilloscope(stream = dev.streams[0])
#~ w2.show()
#~ w2.auto_gain_and_offset(mode = 0)
#~ w2.set_params(xsize = 5, mode = 'scroll')
app.exec_()
# Stope and release the device
dev.stop()
dev.close()
def on_pc1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler=streamhandler)
dev.configure(nb_channel=16, sampling_rate=1000.0, buffer_length=64, packet_size=100) # name = 'Test dev',
dev.initialize()
dev.start()
channel_mask = np.ones(16, dtype=bool)
channel_mask[::2] = False
converter1 = AnaSigSharedMem_to_AnaSigPlainData(
streamhandler, dev.streams[0], info_port=info_port, compress="blosc", channel_mask=channel_mask
)
time.sleep(20.0)
converter1.stop()
dev.stop()
dev.close()
def test1():
streamhandler = StreamHandler()
timestampserver = TimestampServer()
n= 4
devices = [ ]
sampling_rates = [10., 500., 1000., 10000.]
packet_sizes = [4, 32, 64, 128]
for i in range(4):
dev = FakeMultiSignals(streamhandler = streamhandler)
sampling_rate = sampling_rates[i%4]
packet_size = packet_sizes[i%4]
dev.configure( name = 'device {}'.format(i),
nb_channel = 3,
sampling_rate =sampling_rate,
buffer_length = 10. * (sampling_rate//packet_size)/(sampling_rate/packet_size),
packet_size = packet_size,
)
dev.initialize()
devices.append(dev)
timestampserver.follow_stream(dev.streams[0])
gevent.sleep(1)
for i, dev in enumerate(devices):
dev.start()
gevent.sleep(1)
stops = [ gevent.event.Event() for dev in devices ]
greenlets = [ gevent.spawn(test_recv_loop, dev.streams[0]['port'], stop) for dev, stop in zip(devices, stops) ]
for i in range(4):
gevent.spawn_later(2., print_sampling_rate, timestampserver, devices[i] .streams[0]['port'])
gevent.sleep(5)
for stop in stops:
stop.set()
gevent.sleep(1.)
for i, dev in enumerate(devices):
dev.stop()
def filter_analog1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( nb_channel = 2,
sampling_rate =10000.,
buffer_length = 30.,
packet_size = 100,
last_channel_is_trig = True,
)
dev.initialize()
dev.start()
dev2 = FakeDigital(streamhandler = streamhandler)
dev2.configure(
nb_channel = 30,
sampling_rate =10000.,
buffer_length = 30.,
packet_size = 100,
)
dev2.initialize()
dev2.start()
filter = BandPassFilter(stream = dev.streams[0],
streamhandler= streamhandler,
autostart = False,
f_start =0.,
f_stop = dev.streams[0].sampling_rate/10./2.,
)
decimator = SimpleDecimator( filter.out_stream,
streamhandler= streamhandler,
downsampling_factor = 10,
autostart = False,
)
decimator2 = SimpleDecimator( dev2.streams[0],
streamhandler= streamhandler,
downsampling_factor = 10,
autostart = False,
)
print decimator2.out_stream._params
app = QtGui.QApplication([])
filter.start()
decimator.start()
decimator2.start()
visibles = np.ones(dev.nb_channel, dtype = bool)
visibles[1:] = False
w1=Oscilloscope(stream = dev.streams[0])
w2=Oscilloscope(stream = filter.out_stream)
w3=Oscilloscope(stream = decimator.out_stream)
w4 = OscilloscopeDigital(stream = dev2.streams[0])
w5 = OscilloscopeDigital(stream = decimator2.out_stream)
time.sleep(.5)
for w in [w1, w2, w3]:
w.auto_gain_and_offset(mode = 0)
w.set_params(xsize = 1.,
mode = 'scan',
visibles = visibles,
ylims = [-5,5]
)
w.show()
for w in [w4, w5]:
w.set_params(xsize = 1.,
mode = 'scan',
)
w.show()
app.exec_()
w1.stop()
w2.stop()
dev.stop()
dev.close()
class Fake_TeleMir_Vol:
def __init__(self, precomputed, precomputedXY):
self.streamhandler = StreamHandler()
# Configure and start
self.dev = FakeMultiSignals(streamhandler = self.streamhandler)
self.dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
self.dev.initialize()
self.dev.start()
# Configure and start
self.devXY = FakeMultiSignals(streamhandler = self.streamhandler)
self.devXY.configure( #name = 'Test dev',
nb_channel = 2,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputedXY,
)
self.devXY.initialize()
self.devXY.start()
## Configure and start output stream (for extracted feature)
self.fout = TransmitFeatures(streamhandler = self.streamhandler)
self.fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 12,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
self.fout.initialize(stream_in = self.dev.streams[0], stream_xy = self.devXY.streams[0])
self.fout.start()
self.screensize = np.array((1920))
# Impedances
# self.w_imp=Topoplot_imp(stream = self.dev.streams[0], type_Topo = 'imp')
# self.w_imp.show()
# signal
numscreen = 1
self.w_oscilo=Oscilloscope(stream = self.dev.streams[0])
self.w_oscilo.auto_gain_and_offset(mode = 2)
self.w_oscilo.set_params(xsize = 10, mode = 'scroll')
self.w_oscilo.automatic_color('jet')
self.w_oscilo.move(self.screensize + (numscreen-1) * 800 ,200)
#~ self.w_oscilo.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
self.w_oscilo.show()
#parametres
numscreen = 2
self.w_feat1=Oscilloscope(stream = self.fout.streams[0])
self.w_feat1.auto_gain_and_offset(mode = 0)
self.w_feat1.set_params(xsize = 10, mode = 'scroll')
#self.w_feat1.set_params(colors = [[0, 0, 255], [255, 0, 255], [255, 0 ,0], [255, 255, 0], [0, 255, 0], [0, 255, 255]])
self.w_feat1.set_params(ylims = [0,100])
self.w_feat1.move(self.screensize + (numscreen-1) * 800 ,200)
#~ self.w_feat1.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
self.w_feat1.show()
#topo
numscreen = 3
# self.w_topo=Topoplot(stream = self.dev.streams[0], type_Topo = 'topo')
# self.w_topo.move(self.screensize + (numscreen-1) * 800 ,200)
# self.w_topo.show()
# giro
#~ self.w_xy=Oscilloscope(stream = self.devXY.streams[0])
#~ self.w_xy.show()
#~ self.w_xy.auto_gain_and_offset(mode = 1)
#~ self.w_xy.set_params(xsize = 10, mode = 'scroll')
# temps frequence
numscreen = 4
# #self.w_Tf=TimeFreq(stream = self.dev.streams[0])
# self.w_Tf.set_params(xsize = 10)
# self.w_Tf.change_param_tfr(f_stop = 45, f0 = 1)
# self.w_Tf.move(self.screensize + (numscreen-1) * 800 ,200)
# self.w_Tf.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
# self.w_Tf.show()
numscreen = 5
# self.w_Tf2=TimeFreq2(stream = self.dev.streams[0])
# self.w_Tf2.set_params(xsize = 10)
# self.w_Tf2.change_param_tfr(f_stop = 45, f0 = 1)
# self.w_Tf2.move(self.screensize + (numscreen-1) * 800 ,200)
# self.w_Tf2.setWindowFlags(QtCore.Qt.CustomizeWindowHint)
# self.w_Tf2.show()
#w_Tf.change_param_channel(clim = 20)
#~ # freqbands
numscreen = 6 # dans le code
# self.w_sp_bd=freqBandsGraphics(stream = self.dev.streams[0], interval_length = 3., channels = [11])
# self.w_sp_bd.run()
def close(self):
#close windows
# self.w_imp.close()
self.w_oscilo.close()
self.w_feat1.close()
# self.w_topo.close()
#~ self.w_xy.close()
# self.w_Tf.close()
# self.w_Tf2.close()
#~ self.w_sp_bd.close()
# Stope and release the device
self.fout.stop()
self.fout.close()
self.dev.stop()
self.dev.close()
self.devXY.stop()
self.devXY.close()
def teleMir_CB():
streamhandler = StreamHandler()
# Configure and start
#~ dev = FakeMultiSignals(streamhandler = streamhandler)
#~ dev.configure( #name = 'Test dev',
#~ nb_channel = 14,
#~ sampling_rate =128.,
#~ buffer_length = 10.,
#~ packet_size = 1,
#~ )
#~ dev.initialize()
#~ dev.start()
filename = '/home/ran/Projets/pyacq_emotiv_recording/alex/Emotiv Systems Pty Ltd #SN201105160008860.raw'
#filename = '/home/ran/Projets/pyacq_emotiv_recording/caro/Emotiv Systems Pty Ltd #SN201105160008860.raw'
#filename = '/home/mini/pyacq_emotiv_recording/simple_blink/Emotiv Systems Pty Ltd #SN201105160008860.raw'
filenameImp = '/home/ran/Projets/EEG_recordings/anneLise/Emotiv Systems Pty Ltd #SN200709276578911.raw'
filenameXY = '/home/ran/Projets/EEG_recordings/anneLise/Emotiv Systems Pty Ltd #SN200709276578912.raw'
precomputed = np.fromfile(filename , dtype = np.float32).reshape(-1, 14).transpose()
precomputedImp = np.fromfile(filenameImp , dtype = np.float32).reshape(-1, 14).transpose()
precomputedXY = np.fromfile(filenameXY , dtype = np.float32).reshape(-1, 2).transpose()
# Configure and start signal
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
dev.initialize()
dev.start()
#~ # Configure and start imp
#~ devImp = FakeMultiSignals(streamhandler = streamhandler)
#~ devImp.configure( #name = 'Test dev',
#~ nb_channel = 14,
#~ sampling_rate =128.,
#~ buffer_length = 30.,
#~ packet_size = 1,
#~ precomputed = precomputedImp,
#~ )
#~ devImp.initialize()
#~ devImp.start()
# Configure and start gyroXY
devXY = FakeMultiSignals(streamhandler = streamhandler)
devXY.configure( #name = 'Test dev',
nb_channel = 2,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputedXY,
)
devXY.initialize()
devXY.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 6,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0], stream_xy = devXY.streams[0])
fout.start()
#Osc server
#p = Process(target=., args=('bob',))
#color = 'summer'
# Bleu
#color = 'jet'
# Rouge
color = 'hot'
# vert/jaune
#color = 'summer'
app = QtGui.QApplication([])
# Impedances
w_imp=Topoplot_imp(stream = dev.streams[0], type_Topo= 'imp')
w_imp.show()
# freqbands
w_sp_bd=freqBandsGraphics(stream = dev.streams[0], interval_length = 3., channels = [12])
w_sp_bd.run()
# signal
w_oscilo=Oscilloscope(stream = dev.streams[0])
w_oscilo.show()
w_oscilo.set_params(xsize = 10, mode = 'scroll')
w_oscilo.auto_gain_and_offset(mode = 2)
w_oscilo.gain_zoom(100)
#w_oscilo.set_params(colors = 'jet')
select_chan = np.ones(14, dtype = bool)
w_oscilo.automatic_color(cmap_name = 'jet', selected = select_chan)
# parametres
w_feat1=Oscilloscope_f(stream = fout.streams[0])
w_feat1.show()
w_feat1.set_params(colormap = color)
#w_feat1.auto_gain_and_offset(mode = 1)
#w_feat1.set_params(xsize = 10, mode = 'scroll')
#~ select_feat = np.ones(6, dtype = bool)
#~ # print select
#~ #w_oscilo.set_params(colormap = 'automn', selected = select)
#~ w_feat1.automatic_color(cmap_name = 'jet', selected = select_feat)
w_feat1.showFullScreen()
w_feat1.set_params(xsize = 10, mode = 'scroll')
#~ select_feat = np.ones(4, dtype = bool)
#~ w_feat1.automatic_color(cmap_name = 'jet', selected = select_feat)
# topographie
w_topo=Topoplot(stream = dev.streams[0], type_Topo= 'topo')
w_topo.show()
# temps frequence 1
w_Tf=TimeFreq(stream = dev.streams[0])
w_Tf.show()
w_Tf.set_params(xsize = 10)
w_Tf.change_param_tfr(f_stop = 45, f0 = 1)
w_Tf.set_params(colormap = color)
#w_Tf.clim_changed(20)
#w_Tf.change_param_channel(clim = 20)
# temps frequence 2
w_Tf2=TimeFreq2(stream = dev.streams[0])
w_Tf2.show()
w_Tf2.set_params(xsize = 10)
w_Tf2.change_param_tfr(f_stop = 45, f0 = 1)
w_Tf2.set_params(colormap = color)
# kurtosis
#w_ku=KurtosisGraphics(stream = dev.streams[0], interval_length = 1.)
#w_ku.run()
## Bien moins fluide
# Spectre
#~ w_sp=SpectrumGraphics(dev.streams[0],3.,channels=[11,12])
#~ w_sp.run()
w1 = spaceShipLauncher(dev.streams[0])
w1.run()
w1.showFullScreen()
app.exec_()
# Stope and release the device
fout.stop()
fout.close()
print 'ici'
dev.stop()
dev.close()
print 'ici'
devXY.stop()
devXY.close()
print 'ici'
devImp.stop()
devImp.close()
print 'ici'
def filter_analog1():
streamhandler = StreamHandler()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( nb_channel = 64,
sampling_rate =10000.,
buffer_length = 30.,
packet_size = 100,
last_channel_is_trig = True,
)
dev.initialize()
dev.start()
filter = BandPassFilter(stream = dev.streams[0],
streamhandler= streamhandler,
autostart = False)
app = QtGui.QApplication([])
filter.start()
time.sleep(.2)
filter.set_params(f_start = 300., f_stop =np.inf)
time.sleep(.2)
filter.set_params(f_start = 0., f_stop =40.3)
time.sleep(.2)
filter.set_params(f_start = 30., f_stop =70.)
visibles = np.ones(dev.nb_channel, dtype = bool)
visibles[1:] = False
w1=Oscilloscope(stream = dev.streams[0])
w2=Oscilloscope(stream = filter.out_stream)
time.sleep(.5)
for w in [w1, w2]:
w.auto_gain_and_offset(mode = 0)
w.set_params(xsize = 1.,
mode = 'scan',
visibles = visibles,
ylims = [-5,5]
)
w.show()
#~ w3=TimeFreq(stream = dev.streams[0])
#~ w4=TimeFreq(stream = filter.out_stream)
#~ for w in [w3, w4]:
#~ w.set_params(colormap = 'hot', visibles = visibles,
#~ xsize=30,
#~ nb_column = 1)
#~ w.show()
app.exec_()
w1.stop()
w2.stop()
dev.stop()
dev.close()
def teleMir_CB():
streamhandler = StreamHandler()
# Configure and start
#~ dev = FakeMultiSignals(streamhandler = streamhandler)
#~ dev.configure( #name = 'Test dev',
#~ nb_channel = 14,
#~ sampling_rate =128.,
#~ buffer_length = 10.,
#~ packet_size = 1,
#~ )
#~ dev.initialize()
#~ dev.start()
#filename = '/home/mini/pyacq_emotiv_recording/rec 2013-09-19 16:20:36.580141_Alex/Emotiv Systems Pty Ltd #SN201105160008860.raw'
#filename = '/home/mini/pyacq_emotiv_recording/rec 2013-09-18 14:12:09.347990_Caro/Emotiv Systems Pty Ltd #SN201105160008860.raw'
filename = '/home/mini/pyacq_emotiv_recording/simple_blink/Emotiv Systems Pty Ltd #SN201105160008860.raw'
precomputed = np.fromfile(filename , dtype = np.float32).reshape(-1, 14).transpose()
# Configure and start
dev = FakeMultiSignals(streamhandler = streamhandler)
dev.configure( #name = 'Test dev',
nb_channel = 14,
sampling_rate =128.,
buffer_length = 30.,
packet_size = 1,
precomputed = precomputed,
)
dev.initialize()
dev.start()
## Configure and start output stream (for extracted feature)
fout = TransmitFeatures(streamhandler = streamhandler)
fout.configure( #name = 'Test fout',
nb_channel = 14, # np.array([1:5])
nb_feature = 4,
nb_pts = 128,
sampling_rate =10.,
buffer_length = 10.,
packet_size = 1,
)
fout.initialize(stream_in = dev.streams[0])
fout.start()
#Osc server
#p = Process(target=., args=('bob',))
app = QtGui.QApplication([])
# Impedances
#~ w_imp=Topoplot(stream = dev.streams[0], type_Topo= 'imp')
#~ w_imp.show()
# signal
w_oscilo=Oscilloscope(stream = dev.streams[0])
w_oscilo.show()
w_oscilo.auto_gain_and_offset(mode = 1)
w_oscilo.set_params(xsize = 10, mode = 'scroll')
# temps frequence
w_Tf=TimeFreq(stream = dev.streams[0])
w_Tf.show()
w_Tf.set_params(xsize = 10)
w_Tf.change_param_tfr(f_stop = 45, f0 = 1)
#w_Tf.change_param_channel(clim = 20)
# kurtosis
#w_ku=KurtosisGraphics(stream = dev.streams[0], interval_length = 1.)
#w_ku.run()
# freqbands
w_sp_bd=freqBandsGraphics(stream = dev.streams[0], interval_length = 3., channels = [11,12])
w_sp_bd.run()
## Bien moins fluide
# Spectre
#~ w_sp=SpectrumGraphics(dev.streams[0],3.,channels=[11,12])
#~ w_sp.run()
w_feat1=Oscilloscope(stream = fout.streams[0])
w_feat1.show()
w_feat1.set_params(xsize = 10, mode = 'scroll')
#w1 = glSpaceShip(dev.streams[0])
#w1.run()
#w1.showFullScreen()
app.exec_()
# Stope and release the device
fout.stop()
fout.close()
dev.stop()
dev.close()
