def __init__(self, data, default_passphrase=""):
super().__init__(data)
self._passphrase_entry = self.builder.get_object("passphrase_entry")
self._confirm_entry = self.builder.get_object("confirm_pw_entry")
self._save_button = self.builder.get_object("passphrase_save_button")
self._strength_bar = self.builder.get_object("strength_bar")
self._strength_label = self.builder.get_object("strength_label")
self._passphrase_warning_image = self.builder.get_object("passphrase_warning_image")
self._passphrase_warning_label = self.builder.get_object("passphrase_warning_label")
# Set the offset values for the strength bar colors
self._strength_bar.add_offset_value("low", 2)
self._strength_bar.add_offset_value("medium", 3)
self._strength_bar.add_offset_value("high", 4)
# Setup the password checker for passphrase checking
self._checker = input_checking.PasswordChecker(
initial_password_content=self._passphrase_entry.get_text(),
initial_password_confirmation_content=self._confirm_entry.get_text(),
policy_name=PASSWORD_POLICY_LUKS
)
# configure the checker for passphrase checking
self._checker.secret_type = constants.SecretType.PASSPHRASE
# connect UI updates to check results
self._checker.checks_done.connect(self._set_status)
self.passphrase = default_passphrase
self._passphrase_good_enough = False
# check that the content of the passphrase field & the conformation field are the same
self._confirm_check = input_checking.PasswordConfirmationCheck()
# check passphrase validity, quality and strength
self._validity_check = input_checking.PasswordValidityCheck()
# connect UI updates to validity check results
self._validity_check.result.password_score_changed.connect(self._set_password_strength)
self._validity_check.result.status_text_changed.connect(self._set_password_status_text)
# check if the passphrase contains non-ascii characters
self._ascii_check = input_checking.PasswordASCIICheck()
# check if the passphrase is empty
self._empty_check = input_checking.PasswordEmptyCheck()
# register the individual checks with the checker in proper order
# 1) are both entered passphrases the same ?
# 2) is the passphrase valid according to the current password checking policy ?
# 3) is the passphrase free of non-ASCII characters ?
self._checker.add_check(self._confirm_check)
self._checker.add_check(self._validity_check)
self._checker.add_check(self._ascii_check)
self._checker.add_check(self._empty_check)
# set the visibility of the password entries
# - without this the password visibility toggle icon will
# not be shown
set_password_visibility(self._passphrase_entry, False)
set_password_visibility(self._confirm_entry, False)
def initialize(self):
NormalSpoke.initialize(self)
# place holders for the text boxes
self.pw = self.builder.get_object("pw")
self.confirm = self.builder.get_object("confirmPW")
self.lock = self.builder.get_object("lock")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# - Is there any data in the confirm box?
self.add_check(self.pw, self._checkPasswordEmpty)
# the password confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field so that errors focus on confirm,
# and check changes to the password field in on_password_changed
self._confirm_check = self.add_check(self.confirm, self._checkPasswordConfirm)
# Keep a reference for these checks, since they have to be manually run for the
# click Done twice check.
self._pwStrengthCheck = self.add_check(self.pw, self._checkPasswordStrength)
self._pwASCIICheck = self.add_check(self.pw, self._checkPasswordASCII)
self.add_check(self.confirm, self._checkPasswordEmpty)
# Counters for checks that ask the user to click Done to confirm
self._waiveStrengthClicks = 0
self._waiveASCIIClicks = 0
# Password validation data
self._pwq_error = None
self._pwq_valid = True
self._kickstarted = self.data.rootpw.seen
if self._kickstarted:
self.pw.set_placeholder_text(_("The password is set."))
self.confirm.set_placeholder_text(_("The password is set."))
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("root")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# place holders for the text boxes
self.pw = self.builder.get_object("pw")
self.confirm = self.builder.get_object("confirmPW")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# - Is there any data in the confirm box?
self._confirm_check = self.add_check(self.confirm,
self.check_password_confirm)
# Keep a reference for these checks, since they have to be manually run for the
# click Done twice check.
self._pwEmptyCheck = self.add_check(self.pw, self.check_password_empty)
self._pwStrengthCheck = self.add_check(
self.pw, self.check_user_password_strength)
self._pwASCIICheck = self.add_check(self.pw, self.check_password_ASCII)
self._kickstarted = self.data.rootpw.seen
if self._kickstarted:
self.pw.set_placeholder_text(_("The password is set."))
self.confirm.set_placeholder_text(_("The password is set."))
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("root")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
# Send ready signal to main event loop
hubQ.send_ready(self.__class__.__name__, False)
# report that we are done
self.initialize_done()
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# place holders for the text boxes
self.pw = self.builder.get_object("pw")
self.confirm = self.builder.get_object("confirmPW")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# - Is there any data in the confirm box?
self._confirm_check = self.add_check(self.confirm, self.check_password_confirm)
# Keep a reference for these checks, since they have to be manually run for the
# click Done twice check.
self._pwEmptyCheck = self.add_check(self.pw, self.check_password_empty)
self._pwStrengthCheck = self.add_check(self.pw, self.check_user_password_strength)
self._pwASCIICheck = self.add_check(self.pw, self.check_password_ASCII)
self._kickstarted = self.data.rootpw.seen
if self._kickstarted:
self.pw.set_placeholder_text(_("The password is set."))
self.confirm.set_placeholder_text(_("The password is set."))
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("root")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
# Send ready signal to main event loop
hubQ.send_ready(self.__class__.__name__, False)
# report that we are done
self.initialize_done()
def __init__(self, data):
GUIObject.__init__(self, data)
GUIInputCheckHandler.__init__(self)
self._confirm_entry = self.builder.get_object("confirm_pw_entry")
self._passphrase_entry = self.builder.get_object("passphrase_entry")
self._save_button = self.builder.get_object("passphrase_save_button")
self._strength_bar = self.builder.get_object("strength_bar")
self._strength_label = self.builder.get_object("strength_label")
self._passphrase_warning_image = self.builder.get_object(
"passphrase_warning_image")
self._passphrase_warning_label = self.builder.get_object(
"passphrase_warning_label")
# Set the offset values for the strength bar colors
self._strength_bar.add_offset_value("low", 2)
self._strength_bar.add_offset_value("medium", 3)
self._strength_bar.add_offset_value("high", 4)
self._strength_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("luks")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# These will be set up later.
self._pwq = None
self._pwq_error = None
self.passphrase = ""
# the passphrase confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field and check changes to the
# password field in on_passphrase_changed
self._passphrase_match_check = self.add_check(self._confirm_entry,
self._checkMatch)
self._strength_check = self.add_check(self._passphrase_entry,
self._checkStrength)
self._ascii_check = self.add_check(self._passphrase_entry,
self._checkASCII)
# set the visibility of the password entries
set_password_visibility(self._passphrase_entry, False)
set_password_visibility(self._confirm_entry, False)
def __init__(self, data):
GUIObject.__init__(self, data)
GUIInputCheckHandler.__init__(self)
self._confirm_entry = self.builder.get_object("confirm_pw_entry")
self._passphrase_entry = self.builder.get_object("passphrase_entry")
self._save_button = self.builder.get_object("passphrase_save_button")
self._strength_bar = self.builder.get_object("strength_bar")
self._strength_label = self.builder.get_object("strength_label")
self._passphrase_warning_image = self.builder.get_object("passphrase_warning_image")
self._passphrase_warning_label = self.builder.get_object("passphrase_warning_label")
# Set the offset values for the strength bar colors
self._strength_bar.add_offset_value("low", 2)
self._strength_bar.add_offset_value("medium", 3)
self._strength_bar.add_offset_value("high", 4)
self._strength_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("luks")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# These will be set up later.
self._pwq = None
self._pwq_error = None
self.passphrase = ""
# the passphrase confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field and check changes to the
# password field in on_passphrase_changed
self._passphrase_match_check = self.add_check(self._confirm_entry, self._checkMatch)
self._strength_check = self.add_check(self._passphrase_entry, self._checkStrength)
self._ascii_check = self.add_check(self._passphrase_entry, self._checkASCII)
# set the visibility of the password entries
set_password_visibility(self._passphrase_entry, False)
set_password_visibility(self._confirm_entry, False)
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# get object references from the builders
self._password_entry = self.builder.get_object("password_entry")
self._password_confirmation_entry = self.builder.get_object("password_confirmation_entry")
self._password_bar = self.builder.get_object("password_bar")
self._password_label = self.builder.get_object("password_label")
self._enable_root_radio = self.builder.get_object("enable_root_radio")
self._disable_root_radio = self.builder.get_object("disable_root_radio")
self._root_password_ssh_login_override = self.builder.get_object("root_password_ssh_login_override")
self._revealer = self.builder.get_object("password_revealer")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# Setup the password checker for password checking
self._checker = input_checking.PasswordChecker(
initial_password_content=self.password,
initial_password_confirmation_content=self.password_confirmation,
policy_name=PASSWORD_POLICY_ROOT
)
# configure the checker for password checking
self.checker.secret_type = constants.SecretType.PASSWORD
# remove any placeholder texts if either password or confirmation field changes content from initial state
self.checker.password.changed_from_initial_state.connect(self.remove_placeholder_texts)
self.checker.password_confirmation.changed_from_initial_state.connect(self.remove_placeholder_texts)
# connect UI updates to check results
self.checker.checks_done.connect(self._checks_done)
# check that the password is not empty
self._empty_check = input_checking.PasswordEmptyCheck()
# check that the content of the password field & the conformation field are the same
self._confirm_check = input_checking.PasswordConfirmationCheck()
# check password validity, quality and strength
self._validity_check = input_checking.PasswordValidityCheck()
# connect UI updates to validity check results
self._validity_check.result.password_score_changed.connect(self.set_password_score)
self._validity_check.result.status_text_changed.connect(self.set_password_status)
# check if the password contains non-ascii characters
self._ascii_check = input_checking.PasswordASCIICheck()
# register the individual checks with the checker in proper order
# 1) is the password non-empty ?
# 2) are both entered passwords the same ?
# 3) is the password valid according to the current password checking policy ?
# 4) is the password free of non-ASCII characters ?
self.checker.add_check(self._empty_check)
self.checker.add_check(self._confirm_check)
self.checker.add_check(self._validity_check)
self.checker.add_check(self._ascii_check)
# Set placeholders if the password has been set outside of the Anaconda
# GUI we either don't really know anything about it if it's crypted
# and still would not really want to expose it if its set in plaintext,
# and thus can'treally show it in the UI in any meaningful way.
if self._users_module.IsRootPasswordSet:
password_set_message = _("Root password has been set.")
self.password_entry.set_placeholder_text(password_set_message)
self.password_confirmation_entry.set_placeholder_text(password_set_message)
# Configure levels for the password bar
self._password_bar.add_offset_value("low", 2)
self._password_bar.add_offset_value("medium", 3)
self._password_bar.add_offset_value("high", 4)
# set visibility of the password entries
# - without this the password visibility toggle icon will
# not be shown
set_password_visibility(self.password_entry, False)
set_password_visibility(self.password_confirmation_entry, False)
# Send ready signal to main event loop
hubQ.send_ready(self.__class__.__name__)
# report that we are done
self.initialize_done()
def on_password_icon_clicked(self, entry, icon_pos, event):
"""Called by Gtk callback when the icon of a password entry is clicked."""
set_password_visibility(entry, not entry.get_visibility())
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# Create a new UserData object to store this spoke's state
# as well as the state of the advanced user dialog.
if self.data.user.userList:
self._user = copy.copy(self.data.user.userList[0])
else:
self._user = self.data.UserData()
# gather references to relevant GUI objects
# entry fields
self._fullname_entry = self.builder.get_object("fullname_entry")
self._username_entry = self.builder.get_object("username_entry")
self._password_entry = self.builder.get_object("password_entry")
self._password_confirmation_entry = self.builder.get_object(
"password_confirmation_entry")
# check boxes
self._admin_checkbox = self.builder.get_object("admin_checkbox")
self._password_required_checkbox = self.builder.get_object(
"password_required_checkbox")
# advanced user configration dialog button
self._advanced_button = self.builder.get_object("advanced_button")
# password checking status bar & label
self._password_bar = self.builder.get_object("password_bar")
self._password_label = self.builder.get_object("password_label")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# Setup the password checker for password checking
self._checker = input_checking.PasswordChecker(
initial_password_content=self.password,
initial_password_confirmation_content=self.password_confirmation,
policy=input_checking.get_policy(self.data, "user"))
# configure the checker for password checking
self.checker.username = self.username
self.checker.secret_type = constants.SecretType.PASSWORD
# remove any placeholder texts if either password or confirmation field changes content from initial state
self.checker.password.changed_from_initial_state.connect(
self.remove_placeholder_texts)
self.checker.password_confirmation.changed_from_initial_state.connect(
self.remove_placeholder_texts)
# connect UI updates to check results
self.checker.checks_done.connect(self._checks_done)
# username and full name checks
self._username_check = input_checking.UsernameCheck()
self._fullname_check = input_checking.FullnameCheck()
# empty username is considered a success so that the user can leave
# the spoke without filling it in
self._username_check.success_if_username_empty = True
# check that the password is not empty
self._empty_check = input_checking.PasswordEmptyCheck()
# check that the content of the password field & the conformation field are the same
self._confirm_check = input_checking.PasswordConfirmationCheck()
# check password validity, quality and strength
self._validity_check = input_checking.PasswordValidityCheck()
# connect UI updates to validity check results
self._validity_check.result.password_score_changed.connect(
self.set_password_score)
self._validity_check.result.status_text_changed.connect(
self.set_password_status)
# check if the password contains non-ascii characters
self._ascii_check = input_checking.PasswordASCIICheck()
# register the individual checks with the checker in proper order
# 0) is the username and fullname valid ?
# 1) is the password non-empty ?
# 2) are both entered passwords the same ?
# 3) is the password valid according to the current password checking policy ?
# 4) is the password free of non-ASCII characters ?
self.checker.add_check(self._username_check)
self.checker.add_check(self._fullname_check)
self.checker.add_check(self._empty_check)
self.checker.add_check(self._confirm_check)
self.checker.add_check(self._validity_check)
self.checker.add_check(self._ascii_check)
self.guesser = {self.username_entry: True}
# Configure levels for the password bar
self.password_bar.add_offset_value("low", 2)
self.password_bar.add_offset_value("medium", 3)
self.password_bar.add_offset_value("high", 4)
# indicate when the password was set by kickstart
self.password_kickstarted = self.data.user.seen
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
password_set_message = _("The password was set by kickstart.")
if self.password_kickstarted:
self.password_required = True
self.password_entry.set_placeholder_text(password_set_message)
self.password_confirmation_entry.set_placeholder_text(
password_set_message)
elif not self.checker.policy.emptyok:
# Policy is that a non-empty password is required
self.password_required = True
if not self.checker.policy.emptyok:
# User isn't allowed to change whether password is required or not
self.password_required_checkbox.set_sensitive(False)
self._advanced_user_dialog = AdvancedUserDialog(self._user, self.data)
self._advanced_user_dialog.initialize()
# set the visibility of the password entries
set_password_visibility(self.password_entry, False)
set_password_visibility(self.password_confirmation_entry, False)
# report that we are done
self.initialize_done()
def initialize(self):
NormalSpoke.initialize(self)
# Create a new UserData object to store this spoke's state
# as well as the state of the advanced user dialog.
if self.data.user.userList:
self._user = copy.copy(self.data.user.userList[0])
else:
self._user = self.data.UserData()
# placeholders for the text boxes
self.fullname = self.builder.get_object("t_fullname")
self.username = self.builder.get_object("t_username")
self.pw = self.builder.get_object("t_password")
self.confirm = self.builder.get_object("t_verifypassword")
self.admin = self.builder.get_object("c_admin")
self.usepassword = self.builder.get_object("c_usepassword")
self.b_advanced = self.builder.get_object("b_advanced")
# Counters for checks that ask the user to click Done to confirm
self._waiveStrengthClicks = 0
self._waiveASCIIClicks = 0
self.guesser = True
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("user")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# indicate when the password was set by kickstart
self._password_kickstarted = self.data.user.seen
# Password checks, in order of importance:
# - if a password is required, is one specified?
# - if a password is specified and there is data in the confirm box, do they match?
# - if a password is specified and the confirm box is empty or match, how strong is it?
# - if a strong password is specified, does it contain non-ASCII data?
# - if a password is required, is there any data in the confirm box?
self.add_check(self.pw, self._checkPasswordEmpty)
# the password confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field so that errors focus on confirm,
# and check changes to the password field in password_changed
self._confirm_check = self.add_check(self.confirm,
self._checkPasswordConfirm)
# Keep a reference to these checks, since they have to be manually run for the
# click Done twice check.
self._pwStrengthCheck = self.add_check(self.pw,
self._checkPasswordStrength)
self._pwASCIICheck = self.add_check(self.pw, self._checkPasswordASCII)
self.add_check(self.confirm, self._checkPasswordEmpty)
self.add_check(self.username, self._checkUsername)
self.add_re_check(self.fullname, GECOS_VALID,
_("Full name cannot contain colon characters"))
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
if self._password_kickstarted:
self.usepassword.set_active(True)
self.pw.set_placeholder_text(
_("The password was set by kickstart."))
self.confirm.set_placeholder_text(
_("The password was set by kickstart."))
elif not self.policy.emptyok:
# Policy is that a non-empty password is required
self.usepassword.set_active(True)
if not self.policy.emptyok:
# User isn't allowed to change whether password is required or not
self.usepassword.set_sensitive(False)
self._advanced = AdvancedUserDialog(self._user, self.data)
self._advanced.initialize()
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
def on_password_icon_clicked(self, entry, icon_pos, event):
"""Called by Gtk callback when the icon of a password entry is clicked."""
set_password_visibility(entry, not entry.get_visibility())
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# Create a new UserData object to store this spoke's state
# as well as the state of the advanced user dialog.
if self.data.user.userList:
self._user = copy.copy(self.data.user.userList[0])
else:
self._user = self.data.UserData()
# placeholders for the text boxes
self.fullname = self.builder.get_object("t_fullname")
self.username = self.builder.get_object("t_username")
self.pw = self.builder.get_object("t_password")
self.confirm = self.builder.get_object("t_verifypassword")
self.admin = self.builder.get_object("c_admin")
self.usepassword = self.builder.get_object("c_usepassword")
self.b_advanced = self.builder.get_object("b_advanced")
# set initial state of the input field
self.input_enabled = self.usepassword.get_active()
# Counters for checks that ask the user to click Done to confirm
self.waive_clicks = 0
self.waive_ASCII_clicks = 0
self.guesser = {
self.username: True
}
# Updated during the password changed event and used by the password
# field validity checker
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("user")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# indicate when the password was set by kickstart
self._password_kickstarted = self.data.user.seen
# Password checks, in order of importance:
# - if a password is required, is one specified?
# - if a password is specified and there is data in the confirm box, do they match?
# - if a password is specified and the confirm box is empty or match, how strong is it?
# - if a strong password is specified, does it contain non-ASCII data?
# - if a password is required, is there any data in the confirm box?
# the password confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field so that errors focus on confirm,
# and check changes to the password field in password_changed
self._confirm_check = self.add_check(self.confirm, self.check_password_confirm)
# Keep a reference to these checks, since they have to be manually run for the
# click Done twice check.
self._pwEmptyCheck = self.add_check(self.pw, self.check_password_empty)
self._pwStrengthCheck = self.add_check(self.pw, self.check_user_password_strength)
self._pwASCIICheck = self.add_check(self.pw, self.check_password_ASCII)
self.add_check(self.username, self._checkUsername)
self.add_re_check(self.fullname, GECOS_VALID, _("Full name cannot contain colon characters"))
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
if self._password_kickstarted:
self.usepassword.set_active(True)
self.pw.set_placeholder_text(_("The password was set by kickstart."))
self.confirm.set_placeholder_text(_("The password was set by kickstart."))
elif not self.policy.emptyok:
# Policy is that a non-empty password is required
self.usepassword.set_active(True)
if not self.policy.emptyok:
# User isn't allowed to change whether password is required or not
self.usepassword.set_sensitive(False)
self._advanced = AdvancedUserDialog(self._user, self.data)
self._advanced.initialize()
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
# report that we are done
self.initialize_done()
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# We consider user creation requested if there was at least one user
# in the DBus module user list at startup.
# We also remember how the user was called so that we can clear it
# in a reasonably safe way & if it was cleared.
self._user_list = get_user_list(self._users_module, add_default=True)
self._user_requested = False
self._requested_user_cleared = False
# if user has a name, it's an actual user that has been requested,
# rather than a default user added by us
if self.user.name:
self._user_requested = True
# gather references to relevant GUI objects
# entry fields
self._fullname_entry = self.builder.get_object("fullname_entry")
self._username_entry = self.builder.get_object("username_entry")
self._password_entry = self.builder.get_object("password_entry")
self._password_confirmation_entry = self.builder.get_object("password_confirmation_entry")
# check boxes
self._admin_checkbox = self.builder.get_object("admin_checkbox")
self._password_required_checkbox = self.builder.get_object("password_required_checkbox")
# advanced user configration dialog button
self._advanced_button = self.builder.get_object("advanced_button")
# password checking status bar & label
self._password_bar = self.builder.get_object("password_bar")
self._password_label = self.builder.get_object("password_label")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# Setup the password checker for password checking
self._checker = input_checking.PasswordChecker(
initial_password_content=self.password,
initial_password_confirmation_content=self.password_confirmation,
policy_name=PASSWORD_POLICY_USER
)
# configure the checker for password checking
self.checker.username = self.username
self.checker.secret_type = constants.SecretType.PASSWORD
# remove any placeholder texts if either password or confirmation field changes content from initial state
self.checker.password.changed_from_initial_state.connect(self.remove_placeholder_texts)
self.checker.password_confirmation.changed_from_initial_state.connect(self.remove_placeholder_texts)
# connect UI updates to check results
self.checker.checks_done.connect(self._checks_done)
# username and full name checks
self._username_check = input_checking.UsernameCheck()
self._fullname_check = input_checking.FullnameCheck()
# empty username is considered a success so that the user can leave
# the spoke without filling it in
self._username_check.success_if_username_empty = True
# check that the password is not empty
self._empty_check = input_checking.PasswordEmptyCheck()
# check that the content of the password field & the conformation field are the same
self._confirm_check = input_checking.PasswordConfirmationCheck()
# check password validity, quality and strength
self._validity_check = input_checking.PasswordValidityCheck()
# connect UI updates to validity check results
self._validity_check.result.password_score_changed.connect(self.set_password_score)
self._validity_check.result.status_text_changed.connect(self.set_password_status)
# check if the password contains non-ascii characters
self._ascii_check = input_checking.PasswordASCIICheck()
# Skip the empty and validity password checks if no username is set
self._empty_check.skip = True
self._validity_check.skip = True
# register the individual checks with the checker in proper order
# 0) is the username and fullname valid ?
# 1) is the password non-empty ?
# 2) are both entered passwords the same ?
# 3) is the password valid according to the current password checking policy ?
# 4) is the password free of non-ASCII characters ?
self.checker.add_check(self._username_check)
self.checker.add_check(self._fullname_check)
self.checker.add_check(self._empty_check)
self.checker.add_check(self._confirm_check)
self.checker.add_check(self._validity_check)
self.checker.add_check(self._ascii_check)
self.guesser = {
self.username_entry: True
}
# Configure levels for the password bar
self.password_bar.add_offset_value("low", 2)
self.password_bar.add_offset_value("medium", 3)
self.password_bar.add_offset_value("high", 4)
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
password_set_message = _("The password was set by kickstart.")
if self.password_kickstarted:
self.password_required = True
self.password_entry.set_placeholder_text(password_set_message)
self.password_confirmation_entry.set_placeholder_text(password_set_message)
elif not self.checker.policy.allow_empty:
# Policy is that a non-empty password is required
self.password_required = True
if not self.checker.policy.allow_empty:
# User isn't allowed to change whether password is required or not
self.password_required_checkbox.set_sensitive(False)
self._advanced_user_dialog = AdvancedUserDialog(self)
self._advanced_user_dialog.initialize()
# set the visibility of the password entries
# - without this the password visibility toggle icon will
# not be shown
set_password_visibility(self.password_entry, False)
set_password_visibility(self.password_confirmation_entry, False)
# report that we are done
self.initialize_done()
def initialize(self):
NormalSpoke.initialize(self)
# Create a new UserData object to store this spoke's state
# as well as the state of the advanced user dialog.
if self.data.user.userList:
self._user = copy.copy(self.data.user.userList[0])
else:
self._user = self.data.UserData()
self._wheel = self.data.GroupData(name="wheel")
self._qubes = self.data.GroupData(name="qubes")
self._groupDict = {"wheel": self._wheel, "qubes": self._qubes}
# placeholders for the text boxes
self.username = self.builder.get_object("t_username")
self.pw = self.builder.get_object("t_password")
self.confirm = self.builder.get_object("t_verifypassword")
# Counters for checks that ask the user to click Done to confirm
self._waiveStrengthClicks = 0
self._waiveASCIIClicks = 0
self.guesser = True
self.pw_bar = self.builder.get_object("password_bar")
self.pw_label = self.builder.get_object("password_label")
# Configure levels for the password bar
self.pw_bar.add_offset_value("low", 2)
self.pw_bar.add_offset_value("medium", 3)
self.pw_bar.add_offset_value("high", 4)
self.pw_bar.add_offset_value("full", 4)
# Configure the password policy, if available. Otherwise use defaults.
self.policy = self.data.anaconda.pwpolicy.get_policy("user")
if not self.policy:
self.policy = self.data.anaconda.PwPolicyData()
# indicate when the password was set by kickstart
self._password_kickstarted = self.data.user.seen
# Password checks, in order of importance:
# - if a password is required, is one specified?
# - if a password is specified and there is data in the confirm box, do they match?
# - if a password is specified and the confirm box is empty or match, how strong is it?
# - if a strong password is specified, does it contain non-ASCII data?
# - if a password is required, is there any data in the confirm box?
self.add_check(self.pw, self._checkPasswordEmpty)
# the password confirmation needs to be checked whenever either of the password
# fields change. attach to the confirm field so that errors focus on confirm,
# and check changes to the password field in password_changed
self._confirm_check = self.add_check(self.confirm, self._checkPasswordConfirm)
# Keep a reference to these checks, since they have to be manually run for the
# click Done twice check.
self._pwStrengthCheck = self.add_check(self.pw, self._checkPasswordStrength)
self._pwASCIICheck = self.add_check(self.pw, self._checkPasswordASCII)
self.add_check(self.confirm, self._checkPasswordEmpty)
self.add_check(self.username, self._checkUsername)
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
if self._password_kickstarted:
self.pw.set_placeholder_text(_("The password was set by kickstart."))
self.confirm.set_placeholder_text(_("The password was set by kickstart."))
# set the visibility of the password entries
set_password_visibility(self.pw, False)
set_password_visibility(self.confirm, False)
def initialize(self):
NormalSpoke.initialize(self)
self.initialize_start()
# Create a new UserData object to store this spoke's state
# as well as the state of the advanced user dialog.
if self.data.user.userList:
self._user = copy.copy(self.data.user.userList[0])
else:
self._user = self.data.UserData()
# gather references to relevant GUI objects
# entry fields
self._fullname_entry = self.builder.get_object("fullname_entry")
self._username_entry = self.builder.get_object("username_entry")
self._password_entry = self.builder.get_object("password_entry")
self._password_confirmation_entry = self.builder.get_object("password_confirmation_entry")
# check boxes
self._admin_checkbox = self.builder.get_object("admin_checkbox")
self._password_required_checkbox = self.builder.get_object("password_required_checkbox")
# advanced user configration dialog button
self._advanced_button = self.builder.get_object("advanced_button")
# password checking status bar & label
self._password_bar = self.builder.get_object("password_bar")
self._password_label = self.builder.get_object("password_label")
# Install the password checks:
# - Has a password been specified?
# - If a password has been specified and there is data in the confirm box, do they match?
# - How strong is the password?
# - Does the password contain non-ASCII characters?
# Setup the password checker for password checking
self._checker = input_checking.PasswordChecker(
initial_password_content = self.password,
initial_password_confirmation_content = self.password_confirmation,
policy = input_checking.get_policy(self.data, "user")
)
# configure the checker for password checking
self.checker.username = self.username
self.checker.secret_type = constants.SecretType.PASSWORD
# remove any placeholder texts if either password or confirmation field changes content from initial state
self.checker.password.changed_from_initial_state.connect(self.remove_placeholder_texts)
self.checker.password_confirmation.changed_from_initial_state.connect(self.remove_placeholder_texts)
# connect UI updates to check results
self.checker.checks_done.connect(self._checks_done)
# username and full name checks
self._username_check = input_checking.UsernameCheck()
self._fullname_check = input_checking.FullnameCheck()
# empty username is considered a success so that the user can leave
# the spoke without filling it in
self._username_check.success_if_username_empty = True
# check that the password is not empty
self._empty_check = input_checking.PasswordEmptyCheck()
# check that the content of the password field & the conformation field are the same
self._confirm_check = input_checking.PasswordConfirmationCheck()
# regards both fields empty as success to let the user escape
self._confirm_check.success_if_confirmation_empty = True
# check password validity, quality and strength
self._validity_check = input_checking.PasswordValidityCheck()
# connect UI updates to validity check results
self._validity_check.result.password_score_changed.connect(self.set_password_score)
self._validity_check.result.status_text_changed.connect(self.set_password_status)
# check if the password contains non-ascii characters
self._ascii_check = input_checking.PasswordASCIICheck()
# register the individual checks with the checker in proper order
# 0) is the username and fullname valid ?
# 1) is the password non-empty ?
# 2) are both entered passwords the same ?
# 3) is the password valid according to the current password checking policy ?
# 4) is the password free of non-ASCII characters ?
self.checker.add_check(self._username_check)
self.checker.add_check(self._fullname_check)
self.checker.add_check(self._empty_check)
self.checker.add_check(self._confirm_check)
self.checker.add_check(self._validity_check)
self.checker.add_check(self._ascii_check)
self.guesser = {
self.username_entry: True
}
# Configure levels for the password bar
self.password_bar.add_offset_value("low", 2)
self.password_bar.add_offset_value("medium", 3)
self.password_bar.add_offset_value("high", 4)
# indicate when the password was set by kickstart
self.password_kickstarted = self.data.user.seen
# Modify the GUI based on the kickstart and policy information
# This needs to happen after the input checks have been created, since
# the Gtk signal handlers use the input check variables.
password_set_message = _("The password was set by kickstart.")
if self.password_kickstarted:
self.password_required = True
self.password_entry.set_placeholder_text(password_set_message)
self.password_confirmation_entry.set_placeholder_text(password_set_message)
elif not self.checker.policy.emptyok:
# Policy is that a non-empty password is required
self.password_required = True
if not self.checker.policy.emptyok:
# User isn't allowed to change whether password is required or not
self.password_required_checkbox.set_sensitive(False)
self._advanced_user_dialog = AdvancedUserDialog(self._user, self.data)
self._advanced_user_dialog.initialize()
# set the visibility of the password entries
set_password_visibility(self.password_entry, False)
set_password_visibility(self.password_confirmation_entry, False)
# report that we are done
self.initialize_done()