def of_demo_15():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 15 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# VLAN ID
# Input Port
eth_type = ETH_TYPE_IPv4
vlan_id = 100
input_port = 3
# --- Flow Actions: Push VLAN: Ethernet Type
# Set Field: VLAN ID
# Output: Port Number
push_eth_type = ETH_TYPE_DOT1AD # 802.1ad VLAN tagged frame
push_vlan_id = 200
output_port = 5
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(eth_type), vlan_id, input_port))
print(" Action: Push VLAN (Ethernet Type=%s)" %
(hex(push_eth_type)))
print(" Set Field (VLAN ID=%s)" % (push_vlan_id))
print(" Output (to Physical Port Number %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="Push VLAN")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 22
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1013)
flow_entry.set_flow_cookie(cookie=407)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=3400)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(eth_type=push_eth_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(vid=push_vlan_id)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_vlan_id(vlan_id)
match.set_in_port(in_port=input_port)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_26():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 26 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
flow_table_id = 0
flow_id_base = 12
flow_id = flow_id_base
flowEntries = []
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(6001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(12000)
flow_entry.set_flow_hard_timeout(12000)
flow_entry.set_flow_priority(1000)
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_eth_src("00:11:22:33:44:55")
match.set_eth_dst("aa:bb:cc:dd:ee:ff")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(7001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(2400)
flow_entry.set_flow_hard_timeout(2400)
flow_entry.set_flow_priority(2000)
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_IPv4)
match.set_ipv4_src("1.2.3.4/32")
match.set_ipv4_dst("192.168.1.11/32")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(800)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(1800)
flow_entry.set_flow_idle_timeout(1800)
flow_entry.set_flow_priority(3000)
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=5)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=6)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=7)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_in_port(1)
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(1234)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(4000)
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(ETH_TYPE_QINQ)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(100)
instruction.add_apply_action(action)
action = PushVlanHeaderAction(order=2)
action.set_eth_type(ETH_TYPE_DOT1Q)
instruction.add_apply_action(action)
action = SetFieldAction(order=3)
action.set_vlan_id(998)
instruction.add_apply_action(action)
action = OutputAction(order=4, port=111)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_vlan_id(998)
match.set_in_port(in_port=110)
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(1234)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(4000)
instruction = Instruction(instruction_order=0)
action = PushVlanHeaderAction(order=0)
action.set_eth_type(ETH_TYPE_QINQ)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_vlan_id(100)
instruction.add_apply_action(action)
action = PushVlanHeaderAction(order=2)
action.set_eth_type(ETH_TYPE_DOT1Q)
instruction.add_apply_action(action)
action = SetFieldAction(order=3)
action.set_vlan_id(998)
instruction.add_apply_action(action)
action = OutputAction(order=4, port=111)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_IPv4)
match.set_vlan_id(998)
match.set_in_port(in_port=110)
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(1234)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(4000)
instruction = Instruction(instruction_order=0)
action = PopVlanHeaderAction(order=0)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=110)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_vlan_id(100)
match.set_in_port(111)
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(1234)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(4000)
instruction = Instruction(instruction_order=0)
action = PopVlanHeaderAction(order=0)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=110)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_IPv4)
match.set_vlan_id(100)
match.set_in_port(111)
flow_entry.add_match(match)
flowEntries.append(flow_entry)
print("\n")
print("<<< Remove configured flows from the Controller")
ofswitch.delete_flows(flow_table_id)
print("\n")
print("<<< Set OpenFlow flows on the Controller")
print("\n")
print("<<< Flows to be configured:")
flowEntries = sorted(flowEntries, key=lambda fe: fe.get_flow_priority())
for fe in flowEntries:
print(" %s" % fe.to_ofp_oxm_syntax())
time.sleep(rundelay)
success = True
for fe in flowEntries:
result = ofswitch.add_modify_flow(fe)
status = result.get_status()
if (status.eq(STATUS.OK)):
pass
else:
success = False
print("\n")
print("!!!Demo terminated, failed to add flow:\n '%s'" %
fe.to_ofp_oxm_syntax())
print(" Failure reason: %s" % status.detailed())
if success:
print "\n"
print("<<< Flows successfully added to the Controller")
else:
print "\n"
print("<<< Removing all flows from the Controller")
ofswitch.delete_flows(flow_table_id)
exit(0)
print("\n")
print("<<< Get configured flows from the Controller")
time.sleep(rundelay)
print("\n")
print("<<< Configured flows:")
result = ofswitch.get_configured_FlowEntries(flow_table_id=0)
status = result.get_status()
if (status.eq(STATUS.OK)):
data = result.get_data()
flowEntries = sorted(data, key=lambda fe: fe.get_flow_priority())
for fe in flowEntries:
print " %s" % fe.to_ofp_oxm_syntax()
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print("<<< Get configured flows by IDs from the Controller:")
time.sleep(rundelay)
for i in range(flow_id_base, flow_id):
result = ofswitch.get_configured_FlowEntry(flow_table_id, i)
status = result.get_status()
if (status.eq(STATUS.OK)):
print(" -- Flow id '%s'" % i)
fe = result.get_data()
print " %s" % fe.to_ofp_oxm_syntax()
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
print("<<< Removing all flows from the Controller")
ofswitch.delete_flows(flow_table_id)
exit(0)
time.sleep(rundelay)
print("\n")
print("<<< Remove configured flows from the Controller")
ofswitch.delete_flows(flow_table_id)
time.sleep(rundelay)
print("\n")
print("<<< Get configured flows from the Controller")
result = ofswitch.get_configured_FlowEntries(flow_table_id=0)
status = result.get_status()
if (status.eq(STATUS.DATA_NOT_FOUND)):
print("\n")
print "<<< No configured flows"
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_40():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 40 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify IP packet example1"
priority = 900
cookie = 1300
match_in_port = 10
match_eth_type = ETH_TYPE_IPv4
match_ip_proto = IP_PROTO_TCP
match_ipv4_src_addr = "192.1.2.0/24"
match_ipv4_dst_addr = "173.194.123.40/32"
match_tcp_dst_port = 8080
act_mod_ipv4_src_addr = "212.16.1.8/32"
act_mod_ipv4_dst_addr = "52.87.12.11/32"
act_mod_tcp_src_port = 8888
act_mod_tcp_dst_port = 9999
act_out_port = 119
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IP Protocol (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" TCP Destination Port (%s)" %
(match_in_port, hex(match_eth_type), match_ip_proto,
match_ipv4_src_addr, match_ipv4_dst_addr, match_tcp_dst_port))
print(
" Actions: Modify IPv4 Source Address (%s)\n"
" Modify IPv4 Destination Address (%s)\n"
" Modify TCP Source Port (%s)\n"
" Modify TCP Destination Port (%s)\n"
" Output (%s)" %
(act_mod_ipv4_src_addr, act_mod_ipv4_dst_addr, act_mod_tcp_src_port,
act_mod_tcp_dst_port, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetNwSrcAction(action_order)
action.set_nw_src(act_mod_ipv4_src_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetNwDstAction(action_order)
action.set_nw_dst(act_mod_ipv4_dst_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetTpSrcAction(action_order)
action.set_tp_src(act_mod_tcp_src_port)
instruction.add_apply_action(action)
action_order += 1
action = SetTpDstAction(action_order)
action.set_tp_dst(act_mod_tcp_dst_port)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ip_proto(match_ip_proto)
match.set_ipv4_src(match_ipv4_src_addr)
match.set_ipv4_dst(match_ipv4_dst_addr)
match.set_tcp_dst(match_tcp_dst_port)
flow_entry1.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify IP packet example2"
priority = 900
cookie = 1300
match_in_port = 110
match_eth_type = ETH_TYPE_IPv4
match_ip_proto = IP_PROTO_UDP
match_ipv4_src_addr = "10.1.0.0/16"
match_ipv4_dst_addr = "168.1.1.101/32"
match_udp_dst_port = 1812
act_mod_ipv4_src_addr = "172.101.1.9/32"
act_mod_ipv4_dst_addr = "172.101.1.1/32"
act_mod_udp_src_port = 5555
act_mod_udp_dst_port = 7777
act_out_port = 120
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IP Protocol (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" UDP Destination Port (%s)" %
(match_in_port, hex(match_eth_type), match_ip_proto,
match_ipv4_src_addr, match_ipv4_dst_addr, match_udp_dst_port))
print(
" Actions: Set Field (IPv4 Source Address %s)\n"
" Set Field (IPv4 Destination Address %s)\n"
" Set Field (UDP Source Port %s)\n"
" Set Field (UDP Destination Port %s)\n"
" Output (%s)" %
(act_mod_ipv4_src_addr, act_mod_ipv4_dst_addr, act_mod_udp_src_port,
act_mod_udp_dst_port, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetFieldAction(action_order)
action.set_ipv4_src(act_mod_ipv4_src_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_ipv4_dst(act_mod_ipv4_dst_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_udp_src(act_mod_udp_src_port)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_udp_dst(act_mod_udp_dst_port)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ip_proto(match_ip_proto)
match.set_ipv4_src(match_ipv4_src_addr)
match.set_ipv4_dst(match_ipv4_dst_addr)
match.set_udp_dst(match_udp_dst_port)
flow_entry2.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print(
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_22():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 22 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_IPv4
in_port = 13
ipv4_dst = "10.12.5.4/32"
# --- Flow Actions: Push MPLS
# Set Field
# Output
push_ether_type = ETH_TYPE_MPLS_UCAST
mpls_label = 27
output_port = 14
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" IPv4 Destination Address (%s)" %
(hex(eth_type), in_port, ipv4_dst))
print(
" Action: Push MPLS Header (Ethernet Type %s)\n"
" Set Field (MPLS label %s)\n"
" Output (Physical Port number %s)" %
(hex(push_ether_type), mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 28
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="Push MPLS Label")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1021)
flow_entry.set_flow_cookie(cookie=654)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Push MPLS Header'
# 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = PushMplsHeaderAction(order=0)
action.set_eth_type(push_ether_type)
instruction.add_apply_action(action)
action = SetFieldAction(order=1)
action.set_mpls_label(mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# IPv4 Destination Address
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_ipv4_dst(ipv4_dst)
flow_entry.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print("\n")
print("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully read from the Controller")
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(
"<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully removed from the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_23():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 23 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Input Port
# IPv4 Destination Address
eth_type = ETH_TYPE_MPLS_UCAST
in_port = 13
mpls_label = 27
# --- Flow Actions: Set Field
# Output
new_mpls_label = 44
output_port = 14
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)" %
(hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" %
(new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name="Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout=0)
flow_entry.set_flow_idle_timeout(idle_timeout=0)
flow_entry.set_flow_priority(flow_priority=1022)
flow_entry.set_flow_cookie(cookie=401)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order=0)
action = SetFieldAction(order=0)
action.set_mpls_label(new_mpls_label)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=2)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Input Port
# MPLS Label
match = Match()
match.set_eth_type(eth_type)
match.set_in_port(in_port)
match.set_mpls_label(mpls_label)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_38():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 38 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify source and destination MAC addresses example1"
priority = 700
cookie = 1100
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_ipv4_src_addr = "10.0.0.4/32"
act_mod_src_mac_addr = "00:00:00:11:23:ae"
act_mod_dst_mac_addr = "a0:ff:29:01:19:61"
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IPv4 Source Address (%s)" %
(match_in_port,
hex(match_eth_type),
match_ipv4_src_addr))
print (" Actions: Modify Ethernet Source MAC Address (%s)\n"
" Modify Ethernet Destination MAC Address (%s)\n"
" Output (%s)" %
(act_mod_src_mac_addr, act_mod_dst_mac_addr, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetDlSrcAction(action_order)
action.set_dl_src(act_mod_src_mac_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetDlDstAction(action_order)
action.set_dl_dst(act_mod_dst_mac_addr)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ipv4_src(match_ipv4_src_addr)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify source and destination MAC addresses example2"
priority = 700
cookie = 1100
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_ipv4_src_addr = "192.1.0.11/32"
act_mod_src_mac_addr = "00:1c:42:80:bd:66"
act_mod_dst_mac_addr = "aa:1d:40:60:7c:9f"
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IPv4 Source Address (%s)" %
(match_in_port,
hex(match_eth_type),
match_ipv4_src_addr))
print (" Actions: Set Field (Ethernet Source MAC Address %s)\n"
" Set Field (Ethernet Destination MAC Address %s)\n"
" Output (%s)" %
(act_mod_src_mac_addr, act_mod_dst_mac_addr, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetFieldAction(action_order)
action.set_eth_src(act_mod_src_mac_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_eth_dst(act_mod_dst_mac_addr)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ipv4_src(match_ipv4_src_addr)
flow_entry2.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print ("\n")
print ("<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_37():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 37 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify VLAN ID and VLAN priority example1"
priority = 600
cookie = 1000
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_vlan_id = 100
act_mod_vlan_id = 172
act_mod_vlan_pcp = 2
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" VLAN ID (%s)" %
(match_in_port,
hex(match_eth_type),
match_vlan_id))
print (" Actions: Set VLAN ID (%s)\n"
" Set VLAN priority (%s)\n"
" Output (%s)" %
(act_mod_vlan_id, act_mod_vlan_pcp, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetVlanIdAction(action_order)
action.set_vid(act_mod_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = SetVlanPCPAction(action_order)
action.set_vlan_pcp(act_mod_vlan_pcp)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_vlan_id(match_vlan_id)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify VLAN ID and VLAN priority example2"
priority = 600
cookie = 1000
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_vlan_id = 111
act_mod_vlan_id = 1024
act_mod_vlan_pcp = 3
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" VLAN ID (%s)" %
(match_in_port,
hex(match_eth_type),
match_vlan_id))
print (" Actions: Set Field (VLAN ID %s)\n"
" Set Field (VLAN PCP %s)\n"
" Output (Port number %s)" %
(act_mod_vlan_id, act_mod_vlan_pcp, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetFieldAction(action_order)
action.set_vlan_id(act_mod_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_pcp(act_mod_vlan_pcp)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_vlan_id(match_vlan_id)
flow_entry2.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Third flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Strip VLAN header action example"
priority = 600
cookie = 1000
match_in_port = 112
match_eth_type = ETH_TYPE_IPv4
match_vlan_id = 172
act_out_port = 109
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" VLAN ID (%s)" %
(match_in_port,
hex(match_eth_type),
match_vlan_id))
print (" Actions: Strip VLAN header\n"
" Output (Port number %s)" %
(act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry3 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry3.set_flow_table_id(table_id)
flow_entry3.set_flow_name(flow_name)
flow_entry3.set_flow_id(flow_id)
flow_entry3.set_flow_cookie(cookie)
flow_entry3.set_flow_priority(priority)
flow_entry3.set_flow_hard_timeout(0)
flow_entry3.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = StripVlanAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry3.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_vlan_id(match_vlan_id)
flow_entry3.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry3.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry3)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print ("\n")
print ("<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
table_id = 0 flow_id = 29 flow_entry.set_flow_table_id(table_id) flow_entry.set_flow_id(flow_id) flow_entry.set_flow_name(flow_name = "Change MPLS Label") flow_entry.set_flow_hard_timeout(hard_timeout = 0) flow_entry.set_flow_idle_timeout(idle_timeout = 0) flow_entry.set_flow_priority(flow_priority = 1022) flow_entry.set_flow_cookie(cookie = 401) flow_entry.set_flow_cookie_mask(cookie_mask = 255) # --- Instruction: 'Apply-actions' # Actions: 'Set Field' # 'Output' instruction = Instruction(instruction_order = 0) action = SetFieldAction(order = 0) action.set_mpls_label(new_mpls_label) instruction.add_apply_action(action) action = OutputAction(order = 1, port = 2) instruction.add_apply_action(action) flow_entry.add_instruction(instruction) # --- Match Fields: Ethernet Type # Input Port # MPLS Label match = Match() match.set_eth_type(eth_type) match.set_in_port(in_port) match.set_mpls_label(mpls_label) flow_entry.add_match(match)
def of_demo_25():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 25 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
table_id = 0
priority = 500
cookie = 1000
cookie_mask = 255
customer_port = 110
provider_port = 111
qinq_eth_type = ETH_TYPE_STAG # 802.1ad (QinQ) VLAN tagged frame
dot1q_eth_type = ETH_TYPE_CTAG # 802.1q VLAN tagged frame
arp_eth_type = ETH_TYPE_ARP
ip_eth_type = ETH_TYPE_IPv4
provider_vlan_id = 100 # Provider VLAN
customer_vlan_id = 998 # Customer VLAN
first_flow_id = 31
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(arp_eth_type), customer_vlan_id, customer_port))
print(
" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" %
(hex(qinq_eth_type), provider_vlan_id, hex(dot1q_eth_type),
customer_vlan_id, provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
"actions:push-QINQ-tag,mod_vlan=100," + \
"push-DOT1Q-tag,mod_vlan=998,output:111)"
flow_entry1.set_flow_name(flow_name=fname)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout=600)
flow_entry1.set_flow_idle_timeout(idle_timeout=300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry1.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(ip_eth_type), customer_vlan_id, customer_port))
print(
" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" %
(hex(qinq_eth_type), provider_vlan_id, hex(dot1q_eth_type),
customer_vlan_id, provider_port))
time.sleep(rundelay)
flow_id += 1
flow_entry2 = FlowEntry()
flow_entry2.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,ip;" + \
"actions:push-QINQ-tag,mod_vlan=100,output:111)"
flow_entry2.set_flow_name(flow_name=fname)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_hard_timeout(hard_timeout=600)
flow_entry2.set_flow_idle_timeout(idle_timeout=300)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, provider_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(customer_vlan_id)
match.set_in_port(in_port=customer_port)
flow_entry2.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Third flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(arp_eth_type), provider_vlan_id, provider_port))
print(
" Action: Pop VLAN\n"
" Output (Physical Port number %s)" % (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry3 = FlowEntry()
flow_entry3.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=111,arp,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry3.set_flow_name(flow_name=fname)
flow_entry3.set_flow_id(flow_id)
flow_entry3.set_flow_hard_timeout(hard_timeout=600)
flow_entry3.set_flow_idle_timeout(idle_timeout=300)
flow_entry3.set_flow_priority(priority)
flow_entry3.set_flow_cookie(cookie)
flow_entry3.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry3.add_instruction(instruction)
match = Match()
match.set_eth_type(arp_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry3.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry3.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry3)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Fourth flow entry
# ---------------------------------------------------
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" %
(hex(ip_eth_type), provider_vlan_id, provider_port))
print(
" Action: Pop VLAN\n"
" Output (Physical Port number %s)" % (customer_port))
time.sleep(rundelay)
flow_id += 1
flow_entry4 = FlowEntry()
flow_entry4.set_flow_table_id(table_id)
flow_entry4.set_flow_id(flow_id)
fname = "[MLX1-A] Test flow (match:inport=111,ip,vid=100;" + \
"actions:pop-vlan-tag,output=110)"
flow_entry4.set_flow_name(flow_name=fname)
flow_entry4.set_flow_hard_timeout(hard_timeout=600)
flow_entry4.set_flow_idle_timeout(idle_timeout=300)
flow_entry4.set_flow_priority(priority)
flow_entry4.set_flow_cookie(cookie)
flow_entry4.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PopVlanHeaderAction(action_order)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order, customer_port)
instruction.add_apply_action(action)
flow_entry4.add_instruction(instruction)
match = Match()
match.set_eth_type(ip_eth_type)
match.set_vlan_id(provider_vlan_id)
match.set_in_port(provider_port)
flow_entry4.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry4.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry4)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print("<<< Get configured flows from the Controller")
time.sleep(rundelay)
for i in range(first_flow_id, flow_id + 1):
result = ofswitch.get_configured_flow(table_id, i)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow '%s' successfully read from the Controller" % i)
print("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print(
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_31():
f = "cfg.yml"
d = {}
if (load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print("Failed to get Controller device attributes")
exit(0)
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print("<<< Demo 31 Start")
print("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Set IPv4 ToS action"
priority = 600
cookie = 1000
match_in_port = 109
match_ip_eth_type = ETH_TYPE_IPv4
match_ipv4_dst = "10.1.2.3/32"
mod_nw_tos = 8
act_out_port = 112
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IPv4 Destination Address (%s)" %
(match_in_port, hex(match_ip_eth_type), match_ipv4_dst))
print(
" Actions: Set IPv4 ToS (tos %s)\n"
" Output (Port number %s)" %
(mod_nw_tos, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetNwTosAction(action_order)
action.set_tos(mod_nw_tos)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_ip_eth_type)
match.set_ipv4_dst(match_ipv4_dst)
flow_entry1.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Set Field (IP DSCP) action"
priority = 600
cookie = 1000
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_ipv4_dst = "192.1.2.3/32"
mod_ip_dscp = IP_DSCP_CS5
act_out_port = 112
print "\n"
print("<<< Set OpenFlow flow on the Controller")
print(
" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IPv4 Destination Address (%s)" %
(match_in_port, hex(match_ip_eth_type), match_ipv4_dst))
print(
" Actions: Set Field (IP DSCP %s)\n"
" Output (Port number %s)" %
(mod_ip_dscp, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetFieldAction(action_order)
action.set_ip_dscp(mod_ip_dscp)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ipv4_dst(match_ipv4_dst)
flow_entry2.add_match(match)
print("\n")
print("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if (status.eq(STATUS.OK)):
print("<<< Flow successfully added to the Controller")
else:
print("\n")
print("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print("\n")
print(
"<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print("\n")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print(">>> Demo End")
print(">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
