def plot_collinearity(motifs, best_Z):
"""Plot the cooccurrences of motifs.
"""
import scipy.cluster.hierarchy as hier
# from scipy.stats import pearsonr
M = len(motifs)
cooccurrences = numpy.ones((M, M))
for m1 in xrange(M):
for m2 in xrange(M):
# both = sum(numpy.logical_and(m1seqs, m2seqs))
# cooccurrences[m1,m2] = both/float(sum(m2seqs))
cooccurrences[m1, m2] = \
numpy.sqrt(sum(best_Z[m1] * best_Z[m2])) \
/ numpy.linalg.norm(best_Z[m2])
# rho, _ = pearsonr(best_Z[m1], best_Z[m2])
# cooccurrences[m1, m2] = rho
Y = hier.centroid(cooccurrences)
index = hier.fcluster(Y, -1) - 1
cooccurrences = cooccurrences[index, :]
cooccurrences = cooccurrences[:, index]
pylab.pcolor(cooccurrences)
pylab.colorbar()
ax = pylab.gca()
ax.set_xticks([])
# ax.set_xticks(.5 + numpy.arange(M))
# ax.set_xticklabels(motifs)
ax.set_yticks(.5 + numpy.arange(M))
ax.set_yticklabels(numpy.asarray(motifs)[index])
ax.set_xlim((0, M))
ax.set_ylim((0, M))
for line in ax.yaxis.get_ticklines():
line.set_markersize(0)
pylab.gcf().subplots_adjust(left=.27, bottom=.02, top=.98, right=.99)
def Xtest3(self):
"""
Test from Kate Marvel
As the following code snippet demonstrates, regridding a
cdms2.tvariable.TransientVariable instance using regridTool='regrid2'
results in a new array that is masked everywhere. regridTool='esmf'
and regridTool='libcf' both work as expected.
This is similar to the original test but we construct our own
uniform grid. This should passes.
"""
import cdms2 as cdms
import numpy as np
filename = cdat_info.get_sampledata_path() + '/clt.nc'
a=cdms.open(filename)
data=a('clt')[0,...]
print data.mask #verify this data is not masked
GRID = cdms.grid.createUniformGrid(-90.0, 23, 8.0, -180.0, 36, 10.0, order="yx", mask=None)
test_data=data.regrid(GRID,regridTool='regrid2')
# check that the mask does not extend everywhere...
self.assertNotEqual(test_data.mask.sum(), test_data.size)
if PLOT:
pylab.subplot(2, 1, 1)
pylab.pcolor(data[...])
pylab.title('data')
pylab.subplot(2, 1, 2)
pylab.pcolor(test_data[...])
pylab.title('test_data (interpolated data)')
pylab.show()
def plotAllWarmJumps():
jumpAddrs = np.array(getAllWarmJumpsAddr()).reshape((8, 18))
figure()
pcolor(jumpAddrs)
for (x, y), v in np.ndenumerate(jumpAddrs):
text(y + 0.125, x + 0.5, "0x%03x" % v)
show()
def heat_map(K, show, name): pl.pcolor(K) pl.colorbar() pl.title(name) pl.savefig(name) if show == True: pl.show()
def Xtest2(self):
"""
Test from Kate Marvel
As the following code snippet demonstrates, regridding a
cdms2.tvariable.TransientVariable instance using regridTool='regrid2'
results in a new array that is masked everywhere. regridTool='esmf'
and regridTool='libcf' both work as expected.
This passes.
"""
import cdms2 as cdms
import numpy as np
filename = cdat_info.get_sampledata_path() + '/clt.nc'
a=cdms.open(filename)
data=a('clt')[0,...]
print data.mask #verify this data is not masked
GRID= data.getGrid() # input = output grid, passes
test_data=data.regrid(GRID,regridTool='regrid2')
# check that the mask does not extend everywhere...
self.assertNotEqual(test_data.mask.sum(), test_data.size)
if PLOT:
pylab.subplot(2, 1, 1)
pylab.pcolor(data[...])
pylab.title('data')
pylab.subplot(2, 1, 2)
pylab.pcolor(test_data[...])
pylab.title('test_data (interpolated data)')
pylab.show()
def SOM(data,leninput,lentarget,alpha_som,omega_som):
som = MiniSom(16,16,leninput,sigma=omega_som,learning_rate=alpha_som)
som.random_weights_init(data)
print("Training...")
som.train_batch(data,20000) # training with 10000 iterations
print("\n...ready!")
numpy.save('weight_som',som.weights)
bone()
pcolor(som.distance_map().T) # distance map as background
colorbar()
t = zeros(lentarget,dtype=int)
# use different colors and markers for each label
markers = ['o','s','D']
colors = ['r','g','b']
outfile = open('cluster-result.csv','w')
for cnt,xx in enumerate(data):
w = som.winner(xx) # getting the winner
for z in xx:
outfile.write("%s " % str(z))
outfile.write("%s-%s \n" % (str(w[0]),str(w[1])))
outfile.close()
def correlation_matrix(data, size=8.0):
""" Calculates and shows the correlation matrix of the pandas data frame
'data' as a heat map.
Only the correlations between numerical variables are calculated!
"""
# calculate the correlation matrix
corr = data.corr()
#print corr
lc = len(corr.columns)
# set some settings for plottin'
pl.pcolor(corr, vmin = -1, vmax = 1, edgecolor = "black")
pl.colorbar()
pl.xlim([-5,lc])
pl.ylim([0,lc+5])
pl.axis('off')
# anotate the rows and columns with their corresponding variables
ax = pl.gca()
for i in range(0,lc):
ax.annotate(corr.columns[i], (-0.5, i+0.5), \
size='large', horizontalalignment='right', verticalalignment='center')
ax.annotate(corr.columns[i], (i+0.5, lc+0.5),\
size='large', rotation='vertical',\
horizontalalignment='center', verticalalignment='right')
# change the size of the image
fig = pl.figure(num=1)
fig.set_size_inches(size+(size/4), size)
pl.show()
def plot_pairwise_contours(theta,nuvec,Cinv,lvls=(2.291,6.158,11.618)):
"""
> theta is a (3,) vector that contains the model parameters
> thetavecs is a (n,3) matrix that contains the values of the parameters
that will be plotted over
"""
labels = ['A','nu0','sigma']
fisher = fisher_matrix(theta,nuvec,Cinv)
Finv = n.linalg.inv(fisher)
thetavecs = n.zeros((50,theta.shape[0]))
for ii in range(theta.shape[0]):
thetavecs[:,ii] = n.linspace(theta[ii]-5*n.sqrt(Finv[ii,ii]),theta[ii]+5*n.sqrt(Finv[ii,ii]),num=50)
print thetavecs
for ii,jj in ((0,1),(0,2),(1,2)):
print ii,jj
ts = thetavecs[:,[ii,jj]]
print thetavecs.shape
print ts.shape
fs = fisher_select_pair(fisher,ii,jj)
print fs.shape
t0,t1 = n.meshgrid(ts[:,0],ts[:,1])
print t0.shape
Z = fs[0,0]*(t0-theta[ii])*(t0-theta[ii]) + (fs[0,1]+fs[1,0])*(t0-theta[ii])*(t1-theta[jj]) + fs[1,1]*(t1-theta[jj])*(t1-theta[jj])
p.pcolor(t0,t1,Z)
p.colorbar()
CS = p.contour(t0,t1,Z,levels=lvls) #levels=lvls
p.clabel(CS, inline=1, fontsize=10)
#p.contour(t0,t1,Z,lvls)
p.xlabel(labels[ii])
p.ylabel(labels[jj])
p.savefig('./figures/fisher/contours_{0}_{1}.pdf'.format(labels[ii],labels[jj]))
p.clf()
def updateColorTable(self, cItem):
print "now viz!"+str(cItem.row())+","+str(cItem.column())
row = cItem.row()
col = cItem.column()
pl.clf()
#pl.ion()
x = pl.arange(self.dataDimen+1)
y = pl.arange(self.dataDimen+1)
X, Y = pl.meshgrid(x, y)
pl.subplot(1,2,1)
pl.pcolor(X, Y, self.mWx[row*self.dataMaxRange+col])
pl.gca().set_aspect('equal')
pl.colorbar()
pl.gray()
pl.title("user 1")
pl.subplot(1,2,2)
pl.pcolor(X, Y, self.mWy[row*self.dataMaxRange+col])
pl.gca().set_aspect('equal')
pl.colorbar()
pl.gray()
pl.title("user 2")
#pl.tight_layout()
pl.draw()
#pl.show()
pl.show(block=False)
def pylab_pcolor(self, mapping_method='one_to_one_greedy_mapping',
normalize='gold'):
assert normalize in ('total', 'gold', 'test')
import pylab, numpy
rows, gold_labels, test_labels = \
self.as_confusion_matrix(mapping_method=mapping_method)
def normalize_row_by_total(row):
total = self.total_points
return [1 - (cell / total) for cell in row]
def normalize_row_by_row(row):
total = sum(row)
return [1 - (cell / total) for cell in row]
if normalize == 'total':
normalize = normalize_row_by_total
elif normalize == 'gold':
normalize = normalize_row_by_row
else: # test
from AIMA import vector_add
column_totals = reduce(vector_add, rows)
def normalize(row):
return [1 - (cell / total)
for cell, total in zip(row, column_totals)]
rows = [normalize(row)
for gold_label, row in zip(gold_labels, rows)]
rows = numpy.array(rows)
pylab.pcolor(rows)
def __call__(self, n):
if len(self.f.shape) == 3:
# f = f[x,v,t], 2 dim in phase space
ft = self.f[n,:,:]
pylab.pcolor(self.X, self.V, ft.T, cmap='jet')
pylab.colorbar()
pylab.clim(0,0.38) # for Landau test case
pylab.grid()
pylab.axis([self.xmin, self.xmax, self.ymin, self.ymax])
pylab.xlabel('$x$', fontsize = 18)
pylab.ylabel('$v$', fontsize = 18)
pylab.title('$N_x$ = %d, $N_v$ = %d, $t$ = %2.1f' % (self.x.N, self.v.N, self.it*self.t.width))
pylab.savefig(self.path + self.filename)
pylab.clf()
return None
if len(self.f.shape) == 2:
# f = f[x], 1 dim in phase space
ft = self.f[n,:]
pylab.plot(self.x.gridvalues,ft,'ob')
pylab.grid()
pylab.axis([self.xmin, self.xmax, self.ymin, self.ymax])
pylab.xlabel('$x$', fontsize = 18)
pylab.ylabel('$f(x)$', fontsize = 18)
pylab.savefig(self.path + self.filename)
return None
def pcolor(self, mode="mean", vmin=None, vmax=None):
"""
If you loaded the pickle data sets with only mean and sigma, the D and
pvalue mode cannot be used.
"""
from pylab import clf, xticks, yticks, pcolor, colorbar, flipud, log10
if mode == "mean":
data = self.get_mean()
elif mode == "sigma":
data = self.get_sigma()
elif mode == "D":
data = self.get_ks()[0]
elif mode == "pvalue":
data = self.get_ks()[1]
clf();
if mode == "pvalue":
pcolor(log10(flipud(data)), vmin=vmin, vmax=vmax);
else:
pcolor(flipud(data), vmin=vmin,vmax=vmax);
colorbar()
xticks([x+0.5 for x in range(0,8)], self.ligands, rotation=90)
cellLines = self.cellLines[:]
cellLines.reverse()
yticks([x+0.5 for x in range(0,4)], cellLines, rotation=0)
def main(argv=None):
if argv is None:
argv = sys.argv
from pylab import pcolor, show
pcolor(FlowNetwork().fs()[0])
show()
def plotAVTable(experiment):
pylab.figure()
pylab.gray()
pylab.pcolor(experiment.agent.module.params.reshape(81,4).max(1).reshape(9,9),
shading='faceted')
pylab.title("Action-Value table, %s, Run %d" %
(experiment.agent.learner.__class__.__name__, experiment.stepid))
def figurepoimsimple_small(poim, l, start, savefile, show):
R = poim
py.figure(figsize=(14, 12))
motivelen = int(np.log(len(poim)) / np.log(4))
ylabel = []
for i in range(int(math.pow(4, motivelen))):
label = []
index = i
for j in range(motivelen):
label.append(index % 4)
index = int(index / 4)
label.reverse()
ylabel.append(veclisttodna(label))
py.pcolor(R[:, start:start + l])
cb=py.colorbar()
for t in cb.ax.get_yticklabels():
t.set_fontsize(40)
diff = int((l / 5)) - 1
x_places = py.arange(0.5, l, diff)
xa = np.arange(start, start + l, diff)
diff = int((l / 4))
x_places = py.arange(0.5, l , diff)
xa = np.arange(start + 1, start + 1 + l, diff)
py.xlabel("Position", fontsize=46)
py.ylabel("Motif", fontsize=46)
py.yticks(np.arange(math.pow(4, motivelen)) + 0.5, (ylabel),fontsize=40)
py.xticks(x_places, (xa.tolist()),fontsize=40)
if savefile != "":
py.savefig(savefile)
print "the poim should show up here"
if show:
py.show()
def elo_corr_grid_search(data, run=False):
prior_weights = np.arange(0.6, 1.2, 0.1)
corr_place_weights = np.arange(0.8, 1.4, 0.1)
results = pd.DataFrame(columns=prior_weights, index=corr_place_weights, dtype=float)
for prior in prior_weights:
for corr_place in corr_place_weights:
model = EloCorrModel(prior_weight=prior, corr_place_weight=corr_place, min_corr=200)
if run:
Runner(data, model).run()
report = Evaluator(data, model).evaluate()
else:
report = Evaluator(data, model).get_report()
results[prior][corr_place] = report["rmse"]
plt.figure()
plt.title(data)
cmap = plt.cm.get_cmap("gray")
cmap.set_gamma(0.5)
plt.pcolor(results, cmap=cmap)
plt.yticks(np.arange(0.5, len(results.index), 1), results.index)
plt.ylabel("corr_place_weights")
plt.xticks(np.arange(0.5, len(results.columns), 1), results.columns)
plt.xlabel("prior_weights")
plt.colorbar()
def elo_grid_search(data, run=False):
alphas = np.arange(0.4, 2, 0.2)
betas = np.arange(0.02, 0.2, 0.02)
results = pd.DataFrame(columns=alphas, index=betas, dtype=float)
plt.figure()
for alpha in alphas:
for beta in betas:
model = EloModel(alpha=alpha, beta=beta)
# model = EloTreeModel(alpha=alpha, beta=beta, clusters=utils.get_maps("data/"), local_update_boost=0.5)
if run:
Runner(data, model).run()
report = Evaluator(data, model).evaluate()
else:
report = Evaluator(data, model).get_report()
# results[alpha][beta] = report["brier"]["reliability"]
results[alpha][beta] = report["rmse"]
plt.title(data)
cmap = plt.cm.get_cmap("gray")
cmap.set_gamma(0.5)
plt.pcolor(results, cmap=cmap)
plt.yticks(np.arange(0.5, len(results.index), 1), results.index)
plt.ylabel("betas")
plt.xticks(np.arange(0.5, len(results.columns), 1), results.columns)
plt.xlabel("alphas")
plt.colorbar()
def test_regression():
from numpy.random import rand
x = rand(40,1) # explanatory variable
y = x*x*x+rand(40,1)/5 # depentend variable
from sklearn.linear_model import LinearRegression
linreg = LinearRegression()
linreg.fit(x,y)
from numpy import linspace, matrix
xx = linspace(0,1,40)
plot(x,y,'o',xx,linreg.predict(matrix(xx).T),'--r')
show()
from sklearn.metrics import mean_squared_error
print mean_squared_error(linreg.predict(x),y)
from numpy import corrcoef
corr = corrcoef(data.T) # .T gives the transpose
print corr
from pylab import pcolor, colorbar, xticks, yticks
from numpy import arrange
pcolor(corr)
colorbar() # add
# arranging the names of the variables on the axis
xticks(arange(0.5,4.5),['sepal length', 'sepal width', 'petal length', 'petal width'],rotation=-20)
yticks(arange(0.5,4.5),['sepal length', 'sepal width', 'petal length', 'petal width'],rotation=-20)
show()
def plot_pairwise_corrcoef(data,ranklist=range(16,24),title="Correlation Coefficient"):
array_byAttribRankRange=[]
for attrib in attribList:
array_byAttribRankRange.append(get_byAttribRankRange(data, attrib=attrib, ranklist=ranklist))
Narray = len(array_byAttribRankRange)
array_corrcoef=np.zeros((Narray,Narray),dtype='float')
for i,elemi in enumerate(array_byAttribRankRange[::-1]):
for j,elemj in enumerate(array_byAttribRankRange[::-1]):
if i>j:
continue
elif i==j:
array_corrcoef[i,j]=1
else:
array_corrcoef[i,j]=np.corrcoef(elemi,elemj)[0,1]
P.pcolor(np.transpose(array_corrcoef), cmap=P.cm.RdBu, alpha=0.8)
P.title(title)
P.xlim([0,23])
P.ylim([0,23])
P.clim([-1,1])
P.xticks(range(len(attribList)), attribListAbrv[::-1],rotation='vertical')
P.yticks(range(len(attribList)), attribListAbrv[::-1])
P.subplots_adjust(bottom=0.35)
P.subplots_adjust(left=0.25)
P.colorbar()
return array_corrcoef
def plot2d_spectre(tags, freq, resistivity=False,added_resistivity=0,filter_id=False,id_start=0,id_stop=0,add_name=''):
curves = models.CurveDB.objects.filter_tag(tags).filter_param("center_freq",value=freq)
additional_name = ''
if resistivity == True:
curves = curves.filter_param('Added Resistivity ',value=added_resistivity)
additional_name = '_R'+str(added_resistivity)+'Ohm'
if filter_id == True :
curves = curves.filter(id__gt=id_start-1).filter(id__lt=id_stop+1)
a=[]
X=[]
Y=[]
for curve in curves:
a.append(np.power(10,curve.data.values/20)*float(curve.params["calibration"]))
Y.append(float(curve.params["offset"]))
X=array(curve.data.index, dtype=float)
tuple = [(i,j) for i, j in zip(Y,a)]
tuple.sort()
Y = [val[0] for val in tuple]
a = [val[1] for val in tuple]
X = array(X)
a=array(a)
Y=array(Y)
pylab.close()
pylab.pcolor(X,Y,np.log(abs(a)))
pylab.title("Mechancial_response_electrode"+tags.replace('/','_'))
pylab.ylabel('Offset (K)')
pylab.xlabel('Frequency (Hz)')
pylab.legend()
pylab.savefig('thermal_frequency_shift'+str(freq)+tags.replace('/','_')+ additional_name+add_name+'.png')
b=np.asarray([a,X,Y])
np.savetxt('thermal_frequency_shift'+str(freq)+"Hz_amplitude"+tags.replace('/','_')+ additional_name+ add_name +".csv",a,delimiter=",")
np.savetxt('thermal_frequency_shift'+str(freq)+"Hz_frequency"+tags.replace('/','_')+ additional_name+ add_name +".csv",X,delimiter=",")
def rhoPlot(self, ccaMat, filename, winsize, framesize,dataDimen):
dlen = len(ccaMat)
#x = pl.arange(dlen)
#y = pl.arange(dlen)
print "dlen:"+str(dlen)
order = dataDimen
for i in range(order):
pl.clf()
#pl.ion()
#第一成分はとった
cMat = ccaMat[:,:,i]
Y,X = np.mgrid[slice(0, dlen, 1),slice(0, dlen, 1)]
#print "len X:"+str(len(X))+", X:"+str(X)
#X, Y = np.mgrid[0:dlen:complex(0, dlen), 0:dlen:complex(0, dlen)]
pl.pcolor(X, Y, cMat)
pl.xlim(0,dlen-1)
pl.ylim(0,dlen-1)
name = str(filename) + "_w-" + str(winsize) + "_f-" + str(framesize)+"_"+str(i)
pl.title(name)
pl.colorbar()
pl.gray()
pl.draw()
outname = "cca-eig/"+name+".png"
pl.savefig(outname)
print "eig order:",i," save!"
def plot_covar(del_bl=8.,beam_sig=0.09,save_covar=True):
covar,fqs = construct_covar(del_bl=del_bl,beam_sig=beam_sig)
#print covar
p.pcolor(fqs,fqs,covar)
p.colorbar()
p.savefig('{0}/mc_spec_figs/{1}_covar.pdf'.format(fig_loc,save_tag_base))
if save_covar: n.savez_compressed('{0}/monte_carlo/spectrum_data/{1}_covar'.format(data_loc,save_tag_base),covar=covar,fqs=fqs)
def VisualizeColorMaps(CombinedMat, NormalizedPrunedDepMat,
PrunedSemanticSimMat, OntologySimilarityMat, PrunedLabels):
'''
#plt.grid(True)
#plt.subplots_adjust(bottom=0.50)
plt.pcolor(NormalizedPrunedDepMat)
plt.colorbar(use_gridspec=True) #to resize to the tight layout format
plt.yticks(numpy.arange(0.5,len(CombinedMat) + 0.5),PrunedLabels)
plt.xticks(numpy.arange(0.5,len(CombinedMat)+0.5),PrunedLabels, rotation=30,ha='right')
#in prev line: ha = horizontal alignment - right is used to make label terminate the the center of the grid
plt.title("NormalizedPrunedDepMat",fontsize=20,verticalalignment='bottom')
plt.tight_layout() #to resize so that all labels are visible
#plt.savefig('foo.pdf',figsize=(4,4),dpi=600) # to save image as pdf, fig size may or maynot be used
plt.show()
plt.pcolor(PrunedSemanticSimMat)
plt.colorbar(use_gridspec=True)
plt.yticks(numpy.arange(0.5,len(CombinedMat) + 0.5),PrunedLabels)
plt.xticks(numpy.arange(0.5,len(CombinedMat) + 0.5),PrunedLabels, rotation=45,ha='right')
plt.title("PrunedSemanticSimMat",fontsize=20,verticalalignment='bottom')
plt.tight_layout()
plt.show()
'''
plt.pcolor(OntologySimilarityMat)
plt.colorbar(use_gridspec=True)
plt.yticks(numpy.arange(0.5,len(CombinedMat) + 0.5),PrunedLabels)
plt.xticks(numpy.arange(0.5,len(CombinedMat) + 0.5),PrunedLabels, rotation=45,ha='right')
plt.title("OntologySimilarityMat",fontsize=20,verticalalignment='bottom')
plt.xlabel('Packages')
plt.ylabel('Packages')
plt.tight_layout()
plt.show()
def som_plot_mapping(distance_map):
bone()
pcolor(distance_map.T) # plotting the distance map as background
colorbar()
#axis([0,som.weights.shape[0],0,som.weights.shape[1]])
ion()
show() # show the figure
def testeps(d):
M.clf()
M.pcolor(d)
M.axis('tight')
M.colorbar()
M.gcf().set_size_inches((7.5,6.))
M.savefig('test.png',dpi=240)
def plot_time_course(self, data, mode='boolean', fontsize=16):
# TODO sort columnsi alphabetically
# FIXME: twiny labels are slightly shifted
# TODO flip
if mode == 'boolean':
cm = pylab.get_cmap('gray')
pylab.clf()
data = pd.DataFrame(data).fillna(0.5)
pylab.pcolor(data, cmap=cm, vmin=0, vmax=1,
shading='faceted')
pylab.colorbar()
ax1 = pylab.gca()
ax1.set_xticks([])
Ndata = len(data.columns)
ax1.set_xlim(0, Ndata)
ax = pylab.twiny()
ax.set_xticks(pylab.linspace(0.5, Ndata+0.5, Ndata ))
ax.set_xticklabels(data.columns, fontsize=fontsize, rotation=90)
times = list(data.index)
Ntimes = len(times)
ax1.set_yticks([x+0.5 for x in times])
ax1.set_yticklabels(times[::-1],
fontsize=fontsize)
pylab.sca(ax1)
else:
print('not implemented')
def show( self, maxIdx=None, indices=None):
print( 'Exemplar projection')
som = self.som
if maxIdx == None:
maxIdx = len(self.data)
if indices ==None:
data= self.data[0:maxIdx]
target = self.target
else:
data= self.data[indices]
target= self.target[indices]
bone()
pcolor(som.distance_map().T) # plotting the distance map as background
colorbar()
t = zeros(len(target),dtype=int)
t[target == 'A'] = 0
t[target == 'B'] = 1
# use different colors and markers for each label
markers = ['o','s','D']
colors = ['r','g','b']
for cnt,xx in enumerate(data):
w = som.winner(xx) # getting the winner
# palce a marker on the winning position for the sample xx
plot(w[0]+.5,w[1]+.5,markers[t[cnt]],markerfacecolor='None',
markeredgecolor=colors[t[cnt]],markersize=12,markeredgewidth=2)
axis([0,som.weights.shape[0],0,som.weights.shape[1]])
show() # show the figure
def pcAddition(MOVIE=True):
#BP S1
out=[]
for vp in [1,0]:
path=inpath+'vp%03d/E%d/'%(vp+1,97)
coeff=np.load(path+'X/coeff.npy')
pc1=_getPC(coeff,0)
if pc1.mean()>=0.4: pc1=1-pc1
pc2=_getPC(coeff,1)
if pc2.mean()>=0.4: pc2=1-pc2
out.append([])
out[-1].append(pc1)
out[-1].append(pc2)
out[-1].append((pc1-pc2+1)/2.)
#out[-1].append((pc1+pc2)/2.)
if False:
out.append([])
out[-1].append(pc1)
out[-1].append(1-pc2)
out[-1].append((pc1+pc2)/2.)
if MOVIE:
plotGifGrid(out,fn=figpath+'Pixel/pcAddition'+FMT,bcgclr=1,snapshot=2,
plottime=True,text=[['A',20,12,-10],['B',20,84,-10]])
bla
print out[0][0].shape
cols=5;fs=np.linspace(0,out[0][0].shape[0]-1,cols)
ps=np.arange(out[0][0].shape[1])
for i in range(len(out)):
for j in range(len(out[0])):
for fi in range(cols):
plt.subplot(3,cols,j*cols+fi+1)
plt.pcolor(ps,ps,out[i][j][fs[fi],:,:],cmap='gray')
#plt.grid()
plt.savefig(figpath+'Pixel'+os.path.sep+'pcAddition',
dpi=DPI,bbox_inches='tight')
def plot(self):
"""
.. plot::
:include-source:
:width: 80%
from cellnopt.simulate import *
from cellnopt.core import *
pkn = cnodata("PKN-ToyPB.sif")
midas = cnodata("MD-ToyPB.csv")
s = boolean.BooleanSimulator(CNOGraph(pkn, midas))
s.simulate(30)
s.plot()
"""
pylab.clf()
data = numpy.array([self.data[x] for x in self.species if x in self.species])
data = data.transpose()
data = 1 - pylab.flipud(data)
pylab.pcolor(data, vmin=0, vmax=1, edgecolors="k")
pylab.xlabel("species");
pylab.ylabel("Time (tick)");
pylab.gray()
pylab.xticks([0.5+x for x in range(0,30)], self.species, rotation=90)
pylab.ylim([0, self.tick])
pylab.xlim([0, len(self.species)])
def plotContour(X,Y,u,nx,ny,impsi,L,H):
pl.pcolor(X, Y, np.transpose(u), cmap='RdBu')
pl.colorbar()
pl.title("u-velocity contour")
pl.axis([X.min(), X.max(), Y.min(), Y.max()])
pl.show()
# run again with numpy vectorized inner-implementation
t0 = time.time()
ar = view.apply_async(_solve,
tstop,
dt=0,
verbose=True,
final_test=final_test) #, user_action=wave_saver)
if final_test:
# this sum is performed element-wise as results finish
s = sum(ar)
# the L2 norm (RMS) of the result:
norm = sqrt(s / num_cells)
else:
norm = -1
t1 = time.time()
print 'vector inner-version, Wtime=%g, norm=%g' % (t1 - t0, norm)
# if ns.save is True, then u_hist stores the history of u as a list
# If the partion scheme is Nx1, then u can be reconstructed via 'gather':
if ns.save and partition[-1] == 1:
import pylab
view.execute('u_last=u_hist[-1]')
# map mpi IDs to IPython IDs, which may not match
ranks = view['my_id']
targets = range(len(ranks))
for idx in range(len(ranks)):
targets[idx] = ranks.index(idx)
u_last = rc[targets].gather('u_last', block=True)
pylab.pcolor(u_last)
pylab.show()
sc = MinMaxScaler(feature_range=(0, 1))
x = sc.fit_transform(x)
# Training the SOM
from minisom import MiniSom # cloned from https://github.com/JustGlowing/minisom/
som = MiniSom(x=10, y=10, input_len=15, sigma=1.0,
learning_rate=0.5) # Sigma= radius of the neighbourhood
som.random_weights_init(x)
som.train_random(data=x, num_iteration=100)
# Visualizing the results
# MID - Mean Interneuron Distance
# We have to find the winning node with the highest MID
from pylab import bone, pcolor, colorbar, plot, show
bone()
pcolor(som.distance_map().T)
colorbar()
markers = [
'o', 's'
] # Two markers red circle = didn't get approval and green square = got approval
colors = ['r', 'g']
for i, X in enumerate(
x): # i = indexes of customers and X = vectors of customers
w = som.winner(X)
plot(
w[0] +
0.5, # x coordinate of the winning node 0.5 at the centre of the square
w[1] + 0.5, # y coordinate
markers[y[
i]], # y[i] = value of the dependent variable of that customer; red or green if application is accepted
markeredgecolor=colors[y[i]],
"""
Plot the columns of the output files
"""
import sys
import pylab
data = pylab.loadtxt(sys.argv[1], unpack=True)
shape = (int(sys.argv[2]), int(sys.argv[3]))
lon = pylab.reshape(data[0], shape)
lat = pylab.reshape(data[1], shape)
for i, value in enumerate(data[3:]):
value = pylab.reshape(value, shape)
pylab.figure(figsize=(4, 3))
pylab.axis('scaled')
pylab.title("Column %d" % (i + 4))
pylab.pcolor(lon, lat, value)
pylab.colorbar()
pylab.xlim(lon.min(), lon.max())
pylab.ylim(lat.min(), lat.max())
pylab.savefig('column%d.png' % (i + 4))
def allele_plot(filename, normalize=False, alleles=None, generations=None):
"""Plot the alleles from each generation from the individuals file.
This function creates a plot of the individual allele values as they
change through the generations. It creates three subplots, one for each
of the best, median, and average individual. The best and median
individuals are chosen using the fitness data for each generation. The
average individual, on the other hand, is actually an individual created
by averaging the alleles within a generation. This function requires the
pylab library.
.. note::
This function only works for single-objective problems.
.. figure:: _static/allele_plot.png
:alt: Example allele plot
:align: center
An example image saved from the ``allele_plot`` function.
Arguments:
- *filename* -- the name of the individuals file produced by the file_observer
- *normalize* -- Boolean value stating whether allele values should be
normalized before plotting (default False)
- *alleles* -- a list of allele index values that should be plotted
(default None)
- *generations* -- a list of generation numbers that should be plotted
(default None)
If *alleles* is ``None``, then all alleles are plotted. Similarly, if
*generations* is ``None``, then all generations are plotted.
"""
import pylab
generation_data = []
reader = csv.reader(open(filename))
for row in reader:
g = int(row[0])
row[3] = row[3].replace('[', '')
row[-1] = row[-1].replace(']', '')
individual = [float(r) for r in row[3:]]
individual.append(float(row[2]))
try:
generation_data[g]
except IndexError:
generation_data.append([])
generation_data[g].append(individual)
for gen in generation_data:
gen.sort(key=lambda x: x[-1])
for j, g in enumerate(gen):
gen[j] = g[:-1]
best = []
median = []
average = []
for gen in generation_data:
best.append(gen[0])
plen = len(gen)
if plen % 2 == 1:
med = gen[(plen - 1) // 2]
else:
med = []
for a, b in zip(gen[plen // 2 - 1], gen[plen // 2]):
med.append(float(a + b) / 2)
median.append(med)
avg = [0] * len(gen[0])
for individual in gen:
for i, allele in enumerate(individual):
avg[i] += allele
for i, a in enumerate(avg):
avg[i] /= float(len(gen))
average.append(avg)
for plot_num, (data, title) in enumerate(
zip([best, median, average], ["Best", "Median", "Average"])):
if alleles is None:
alleles = list(range(len(data[0])))
if generations is None:
generations = list(range(len(data)))
if normalize:
columns = list(zip(*data))
max_col = [max(c) for c in columns]
min_col = [min(c) for c in columns]
for dat in data:
for i, d in enumerate(dat):
dat[i] = (d - min_col[i]) / float(max_col[i] - min_col[i])
plot_data = []
for g in generations:
plot_data.append([data[g][a] for a in alleles])
sub = pylab.subplot(3, 1, plot_num + 1)
pylab.pcolor(pylab.array(plot_data))
pylab.colorbar()
step_size = max(len(generations) // 7, 1)
ytick_locs = list(range(step_size, len(generations), step_size))
ytick_labs = generations[step_size::step_size]
pylab.yticks(ytick_locs, ytick_labs)
pylab.ylabel('Generation')
if plot_num == 2:
xtick_locs = list(range(len(alleles)))
xtick_labs = alleles
pylab.xticks(xtick_locs, xtick_labs)
pylab.xlabel('Allele')
else:
pylab.setp(sub.get_xticklabels(), visible=False)
pylab.title(title)
pylab.show()
def run(cluster):
ratio = []
import pyfits
import os
import os, sys, bashreader, commands
from config_bonn import appendix, tag, arc, filters, filter_root, appendix_root
type = 'all'
AP_TYPE = ''
magtype = 'APER1'
DETECT_FILTER = ''
SPECTRA = 'CWWSB_capak.list'
LIST = None
if len(sys.argv) > 2:
for s in sys.argv:
if s == 'spec':
type = 'spec'
elif s == 'rand':
type = 'rand'
elif s == 'all':
type = 'all'
elif s == 'picks':
type = 'picks'
elif s == 'ISO':
magtype = 'ISO'
elif s == 'APER1':
magtype = 'APER1'
import string
if string.find(s, 'detect') != -1:
import re
rs = re.split('=', s)
DETECT_FILTER = '_' + rs[1]
if string.find(s, 'aptype') != -1:
import re
rs = re.split('=', s)
AP_TYPE = '_' + rs[1]
if string.find(s, 'spectra') != -1:
import re
rs = re.split('=', s)
SPECTRA = rs[1]
if string.find(s, 'spectra') != -1:
import re
rs = re.split('=', s)
SPECTRA = rs[1]
if string.find(s, 'list') != -1:
import re
rs = re.split('=', s)
LIST = rs[1]
print DETECT_FILTER
print cluster
path = '/nfs/slac/g/ki/ki05/anja/SUBARU/%s/' % cluster
filecommand = open('record.analysis', 'w')
BASE = "coadd"
image = BASE + '.fits'
from glob import glob
images = []
filters.reverse()
print filters
ims = {}
ims_seg = {}
params = {
'path': path,
'filter_root': filter_root,
'cluster': cluster,
'appendix': appendix,
'DETECT_FILTER': DETECT_FILTER,
'AP_TYPE': AP_TYPE
}
params['SPECTRA'] = SPECTRA
params['type'] = type
params['magtype'] = magtype
outputcat = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.%(magtype)s.1.%(SPECTRA)s.%(type)s.bpz.tab' % params
catalog = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.slr.cat' % params
starcatalog = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.stars.calibrated.cat' % params
import do_multiple_photoz, os
filterlist = do_multiple_photoz.get_filters(catalog, 'OBJECTS')
print filterlist
filters = conv_filt(filterlist)
y = {}
for f in filters:
y[f] = 'yes'
filters = y.keys()
filters.sort(sort_filters)
print filters
stars_dict = star_num(filterlist,
catalog,
starcatalog,
cluster,
'APER1',
name_suffix='')
os.system('mkdir -p ' + os.environ['sne'] + '/photoz/' + cluster + '/' +
SPECTRA + '/')
if False:
pagemain = open(
os.environ['sne'] + '/photoz/' + cluster + '/' + SPECTRA +
'/index.html', 'w')
pagemain.write(
'<table align=left><tr><td colspan=5 class="dark"><h1>' + cluster +
'</h1></td></tr><tr><td colspan=5><a href=http://www.slac.stanford.edu/~pkelly/photoz/'
+ cluster +
'/stars.html>Stellar Color-Color Plots</a><td></tr><tr><td colspan=5><a href=redsequence.html>Red Sequence Redshifts</a><td></tr><tr><td><a href=objects.html>Photoz Plots</a><td></tr><tr><td><a href=thecorrections.html>Correction Plots</a><td></tr><tr><td><a href=zdistribution.html>Z Distribution</a><td></tr></table>\n'
)
pagemain.close()
import pyfits, pylab, scipy
p = pyfits.open(outputcat)['STDTAB'].data
pylab.clf()
pylab.hist(p.field('BPZ_ODDS'), bins=scipy.arange(0, 1, 0.02))
pylab.xlabel('ODDS')
pylab.ylabel('Number of Galaxies')
pylab.savefig(os.environ['sne'] + '/photoz/' + cluster + '/' +
SPECTRA + '/odds.png')
cut = 0.5
p = p[p.field('BPZ_ODDS') > cut]
pylab.clf()
pylab.hist(p.field('BPZ_Z_B'), bins=scipy.arange(0, 4, 0.02))
pylab.xlabel('Photometric Redshift')
pylab.ylabel('Number of Galaxies (ODDS > ' + str(cut) + ')')
pylab.savefig(os.environ['sne'] + '/photoz/' + cluster + '/' +
SPECTRA + '/zdist.png')
pagemain = open(
os.environ['sne'] + '/photoz/' + cluster + '/' + SPECTRA +
'/zdistribution.html', 'w')
pagemain.write('<img src=zdist.png></a>')
pagemain.write('<img src=odds.png></a>')
pagemain.close()
pylab.clf()
import flux_comp
corrections, plot_dict, title_dict = reload(flux_comp).calc_comp(
cluster,
DETECT_FILTER.replace('_', ''),
AP_TYPE,
SPECTRA,
type='all',
plot=True)
print corrections
pagemain = open(
os.environ['sne'] + '/photoz/' + cluster + '/' + SPECTRA +
'/thecorrections.html', 'w')
def s(a, b):
if corrections[a] < corrections[b]:
return 1
else:
return -1
keys2 = corrections.keys()
keys2.sort(s)
import scipy
from scipy import stats
kernel = scipy.array(
[scipy.stats.norm.pdf(i, 1.) for i in [4, 3, 2, 1, 0, 1, 2, 3, 4]])
kernel = kernel / kernel.sum()
pagemain.write('<br>CORRECTIONS<br><ul>')
ims = ''
nums = '<br><br>NUMBER OF GOOD STARS<br><ul>\n'
for key in keys2:
if key != 'ID' and key != 'Z_S':
file = os.environ[
'sne'] + '/photoz/' + cluster + '/' + SPECTRA + '/' + key + '.png'
pylab.clf()
o = pylab.hist(plot_dict[key], bins=100, range=[0.5, 1.5])
y_smooth = scipy.convolve(o[0], kernel, 'same') #[5:-5]
print o[1], y_smooth, len(o[1]), len(y_smooth)
#pylab.linewidth = 4
xs = o[1][:-1] + scipy.ones(len(
o[1][:-1])) * (o[1][1] - o[1][0]) * 0.5
ys = y_smooth
pylab.plot(xs, ys, 'r', linewidth=2)
pylab.suptitle(title_dict[key])
print o
pylab.savefig(file)
ims += '<img src=' + key + '.png></a>\n'
a = zip(y_smooth, xs)
a.sort()
max = a[-1][1]
pagemain.write(key + ' median=' + str(corrections[key]) +
' smoothed peak=' + str(max) + '<br>')
nums += key + ' ' + str(stars_dict[key]) + '<br>\n'
pagemain.write('</ul>' + nums + '</ul>' + ims)
pagemain.close()
os.system('mkdir -p ' + os.environ['sne'] + '/photoz/' + cluster)
#mkcolorcolor(filterlist,catalog,starcatalog,cluster,'APER1',name_suffix='aperapercalib')
#mkcolorcolor(filterlist,catalog,starcatalog,cluster,',name_suffix='')
if False:
mkcolorcolor(filterlist,
catalog,
starcatalog,
cluster,
'APER1',
name_suffix='')
#import sys
#sys.exit(0)
print catalog
#catalog = '/u/ki/dapple/subaru/MACS2243-09/PHOTOMETRY_W-J-V_iso/MACS2243-09.aper.slr.cat'
#file = mkcolorcolor(filterlist,catalog,starcatalog,cluster,'ISO',name_suffix='isomags_apercalib')
#catalog = '/u/ki/dapple/subaru/MACS2243-09/PHOTOMETRY_W-J-V_iso/MACS2243-09.slr.cat'
#file = mkcolorcolor(filterlist,catalog,starcatalog,cluster,'ISO',name_suffix='isomags_isocalib')
#catalog = '/u/ki/dapple/subaru/MACS2243-09/PHOTOMETRY_W-J-V_aper/MACS2243-09.slr.cat'
#file = mkcolorcolor(filterlist,catalog,starcatalog,cluster,'APER1',name_suffix='apermags_apercalib')
#print file
ffile = os.environ['sne'] + '/photoz/' + cluster + '/all.tif'
print filters
if not glob(ffile):
print filters[1:4]
for filt in filters[1:4]:
#filter = filter.replace('MEGAPRIME-0-1-','').replace('SUBARU-10_2-1-','').replace('SUBARU-10_2-2-','').replace('SUBARU-10_1-1-','').replace('SUBARU-10_1-2-','')#.replace('SUBARU-8-1-','')
params = {
'path': path,
'filter_root': filter_root,
'cluster': cluster,
'filter': filt,
'DETECT_FILTER': DETECT_FILTER,
'AP_TYPE': AP_TYPE,
'appendix': appendix,
}
print params
# now run sextractor to determine the seeing:
image = '%(path)s/%(filter)s/SCIENCE/coadd_%(cluster)s%(appendix)s/coadd.fits' % params
images.append(image)
print 'reading in ' + image
seg_image = '/%(path)s/%(filter)s/PHOTOMETRY/coadd.apertures.fits' % params
ims[filt] = pyfits.open(image)[0].data
print 'read in ' + image
#ims_seg[filter] = pyfits.open(seg_image)[0].data
print images
os.system('mkdir ' + os.environ['sne'] + '/photoz/' + cluster + '/')
os.system('chmod o+rx ' + os.environ['sne'] + '/photoz/' + cluster +
'/')
from glob import glob
os.system('stiff ' + reduce(lambda x, y: x + ' ' + y, images) +
' -OUTFILE_NAME ' + ffile + ' -BINNING 1 -GAMMA_FAC 1.6')
os.system('convert ' + os.environ['sne'] + '/photoz/' + cluster +
'/all.tif ' + os.environ['sne'] + '/photoz/' + cluster +
'/fix.tif')
print ffile
import Image
im = Image.open(os.environ['sne'] + '/photoz/' + cluster + '/fix.tif')
print catalog
p_cat = pyfits.open(catalog)[1].data
#outputcat = '%(path)s/PHOTOMETRY/all_bpz1_' % params
#spec = True
picks = False
#SPECTRA = 'CWWSB4_txitxo.list'
#SPECTRA = 'CWWSB_capak.list' # use Peter Capak's SEDs
print SPECTRA
outbase = os.environ['sne'] + '/photoz/' + cluster + '/'
os.system('mkdir -p ' + outbase + '/' + SPECTRA + '/')
SeqNr_file = open('SeqNr_file', 'w')
if type == 'spec':
probsout = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.%(magtype)s.1.%(SPECTRA)s.%(type)s.probs' % params
#outputcat = '%(path)s/PHOTOMETRY/%(cluster)s.1.all.bpz.tab' % params
print probsout, outputcat.replace('.tab', '')
f = open(probsout, 'r').readlines()
fz_temp = open(outputcat.replace('.tab', ''), 'r').readlines()
fz = []
for l in fz_temp:
if l[0] != '#': fz.append(l)
import re
res = re.split('\s+', f[0])
print res[4]
res2 = re.split('\,', res[4].replace('z=arange(', '').replace(')', ''))
print res2
import scipy
increment = float(res2[2])
#matrix = scipy.array(zs*
print zip(f[1:], fz[:])[1] #zs
end = int(1. / increment)
zs = (scipy.arange(float(res2[0]), 1. + increment, increment))
prob_matrix = scipy.zeros((end, end))
for l, zf in zip(f[1:], fz[:]):
#print l, zf
import re
resz = re.split('\s+', zf[:-1])
if resz[0] == '': resz = resz[1:]
#print resz
z_spec = float(resz[9])
odds = float(resz[5])
res = re.split('\s+', l[:-1])
if res[-1] == '': res = res[:-1]
#print res
pdz = scipy.array([float(x) for x in res[1:]])
from copy import copy
zs_copy = copy(zs)
#zs_copy = zs_copy[pdz != 0]
#pdz = pdz[pdz != 0]
#print zs_copy, pdz, resz[9]
for i in range(len(zs_copy))[:end]: #z,p in zip(zs_copy, pdz):
if odds > 0.95 and z_spec < 1.:
prob_matrix[i, int(z_spec / increment)] += pdz[i]
#print prob_matrix
#pdz.append(
print 'done calculating'
X, Y = pylab.meshgrid(zs_copy, zs_copy)
print prob_matrix.shape, X.shape, Y.shape
pylab.clf()
print prob_matrix.max()
prob_matrix[prob_matrix > 1] = 1.
pylab.pcolor(X,
Y,
-1. * prob_matrix,
cmap='gray',
alpha=0.9,
shading='flat',
edgecolors='None')
pylab.plot([0, 1], [0, 1], color='red')
pylab.xlabel('SpecZ')
pylab.ylabel('PhotZ')
pylab.savefig(outbase + '/' + SPECTRA + '/RedshiftPDZ01.png')
#pylab.pcolor(X, Y,prob_matrix,cmap='gray',alpha=0.9,shading='flat',edgecolors='None')
#pylab.colorbar()
#doFormating(**formating)
#histogram2d(zs_copy,zs_copy,prob_matrix)
#for l in f[1:]:
# res = re.split('\s+',l)
# print res
if True: #glob(outputcat.replace('.tab','')):
plot_res(outputcat.replace('.tab', ''), outbase, SPECTRA)
print 'plot_res'
print outputcat
bpz_cat = pyfits.open(outputcat)[1].data
print outputcat
gals = []
set = range(len(bpz_cat))
if type == 'rand':
set = range(100)
f_nums = [e[:-1] for e in open('SeqNr_save', 'r').readlines()]
for i in set: #[0:25]: #[75227,45311,53658, 52685, 64726]:
print i
line = bpz_cat[i]
print line, outputcat
text = ''
#for x,y,side,index in [[4800,4900,200,1],[5500,5500,100,2],[4500,5500,300,2]]:
text += '<tr>\n'
SeqNr = int(line['SeqNr'])
fileNumber = str(int(line['BPZ_NUMBER']))
params['fileNumber'] = str(fileNumber)
base = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.%(magtype)s.1.%(SPECTRA)s.%(type)s' % params
probs = '%(path)s/PHOTOMETRY%(DETECT_FILTER)s%(AP_TYPE)s/%(cluster)s.%(magtype)s.1.%(SPECTRA)s.%(type)s.probs' % params
print probs
print base, probs
resid = line['BPZ_Z_B'] - line['BPZ_Z_S']
z = line['BPZ_Z_B']
ODDS = line['BPZ_ODDS']
if True: #line['BPZ_ODDS'] > 0.5 and 0.6 < line['BPZ_Z_B'] < 0.8 and 0.2 < line['BPZ_Z_S'] < 0.4: #abs(resid) > 0.2: #abs(resid) > 0.04 and 0.4 < line['BPZ_Z_S'] < 0.6: #True: #SeqNr==24778: # SeqNr == 4441 or SeqNr==1285: #abs(resid) > 0.1:
# print f_nums
# if True: #len(filter(lambda x: int(line['SeqNr']) == int(x),f_nums)):
probs_f = open(probs, 'r').readlines()
print line['SeqNr']
file = '/nfs/slac/g/ki/ki04/pkelly/photoz/' + cluster + '/' + SPECTRA + '/' + str(
SeqNr) + 'spec.png' #print 'SAVING', outdir + outimg
sys.argv = ['', base, str(SeqNr), file]
import sedplot
print base, 'base'
filt_info = sedplot.run()
print filt_info
import math
if 1: #filt_info[0]['flux'] > 0:
ratio.append(filt_info[0]['expectedflux'] /
filt_info[0]['flux'])
#import pylab
#from scipy import arange
#print ratio
#import scipy
#print 'ratio', scipy.median(scipy.array(ratio))
#a, b, varp = pylab.hist(ratio,bins=arange(0,5,0.1))
#pylab.show()
#if line['BPZ_ODDS'] > 0.95 and abs(resid) > 0.2: #abs(resid) > 0.04 and 0.4 < line['BPZ_Z_S'] < 0.6: #True: #SeqNr==24778: # SeqNr == 4441 or SeqNr==1285: #abs(resid) > 0.1:
#if 1:
print line['BPZ_Z_B']
SeqNr_file.write(str(SeqNr) + '\n')
mask = p_cat.field('SeqNr') == SeqNr
temp = p_cat[mask]
x = int(temp.field('Xpos')[0])
y = 10000 - int(temp.field('Ypos')[0])
x_fits = int(temp.field('Xpos')[0])
y_fits = int(temp.field('Ypos')[0])
import pyraf
from pyraf import iraf
if line['BPZ_Z_S'] != 0:
resid = line['BPZ_Z_B'] - line['BPZ_Z_S']
if resid > 0:
color = 'green'
resid_str = ' <font color=' + color + '>+' + str(
resid) + '</font> '
else:
color = 'red'
resid_str = ' <font color=' + color + '>' + str(
resid) + '</font> '
else:
resid = 'no spec z'
color = 'black'
resid_str = ' <font color=' + color + '>' + str(
resid) + '</font> '
t = [
'BPZ_Z_B', 'BPZ_ODDS', 'BPZ_CHI-SQUARED', 'BPZ_Z_B_MIN',
'BPZ_Z_B_MAX'
]
text += '<td colspan=10>' + str(SeqNr) + ' z=' + str(
line['BPZ_Z_B']
) + ' MIN=' + str(line['BPZ_Z_B_MIN']) + ' MAX=' + str(
line['BPZ_Z_B_MAX']) + resid_str + ' ODDS=' + str(
line['BPZ_ODDS']) + ' TYPE=' + str(
line['BPZ_T_B']) + ' CHISQ=' + str(
line['BPZ_CHI-SQUARED']) + ' x=' + str(
x) + ' y=' + str(y) + '</td></tr><tr>\n'
print x, y
index = SeqNr
outfile = os.environ[
'sne'] + '/photoz/' + cluster + '/' + SPECTRA + '/' + str(
index) + '.png'
plot_bpz_probs(index, probs_f, outfile)
#file = 'Id%09.f.spec' % index
#outfile = os.environ['sne'] + '/photoz/' + str(index) + '.png'
#print outfile
#plot(file,outfile)
text += '<td align=left><img height=400px src=' + str(
index) + '.png></img>\n'
text += '<img height=400px src=' + str(index) + 'spec.png></img>\n'
images = []
file = '/nfs/slac/g/ki/ki04/pkelly/photoz/' + cluster + '/' + str(
SeqNr) + 'spec.png' #print 'SAVING', outdir + outimg
command = 'python ' + os.environ[
'BPZPATH'] + '/plots/sedplot.py ' + base + ' ' + str(
SeqNr) + ' ' + file
print command
import sedplot
#sys.argv = ['',base,str(SeqNr),file]
#filt_info = sedplot.run()
#print filt_info
#print command
#os.system(command)
side = 100 #x = temp.field('Xpos')[0]
if 1: #try:
p = im.crop([x - side, y - side, x + side, y + side])
image = os.environ[
'sne'] + '/photoz/' + cluster + '/' + SPECTRA + '/' + str(
index) + '.jpg'
os.system('rm ' + image)
p.save(image, 'JPEG')
#except: print 'fail'
text += '<img src=' + str(
index) + '.jpg></img></td><td colspan=20></td>\n'
text += '</tr>\n'
keys = [
'name', 'wavelength', 'observed', 'flux', 'fluxerror',
'expectedflux', 'chioffset'
]
text += '<tr><td colspan=10><table><tr>' + reduce(
lambda x, y: x + y, ['<td>' + n + '</td>'
for n in keys]) + "</tr>"
for f in filt_info:
text += '<tr>' + reduce(
lambda x, y: x + y,
['<td>' + str(f[n]) + '</td>' for n in keys]) + "</tr>"
text += "</table></td></tr>"
side = 100 #x = temp.field('Xpos')[0]
#if x_fits - 100 < 0: x_fits = 101
#if y_fits - 100 < 0: y_fits = 101
#if x_fits + 100 > 9999: x_fits = 9899
#if y_fits + 100 > 9999: y_fits = 9899
xlow = int(x_fits - side)
xhigh = int(x_fits + side)
ylow = int(y_fits - side)
yhigh = int(y_fits + side)
if xlow < 0: xlow = ''
if ylow < 0: ylow = ''
if xhigh > 9999: xhigh = ''
if yhigh > 9999: yhigh = ''
bounds = '[' + str(xlow) + ':' + str(xhigh) + ',' + str(
ylow) + ':' + str(yhigh) + ']'
text += '<td colspan=20><table>\n'
textim = ''
textlabel = ''
import string
filters_b = conv_filt(filt_info)
for filt in []: #filters_b: #[1:]:
fitsfile = '/nfs/slac/g/ki/ki04/pkelly/photoz/' + cluster + '/' + SPECTRA + '/' + str(
SeqNr
) + 'cutout' + filt + '.fits' #print 'SAVING', outdir + outimg
jpg = '/nfs/slac/g/ki/ki04/pkelly/photoz/' + cluster + '/' + SPECTRA + '/' + str(
SeqNr
) + 'cutout' + filt + '.jpg' #print 'SAVING', outdir + outimg
os.system('rm ' + fitsfile)
os.system('rm ' + jpg)
bigfile = '/a/wain023/g.ki.ki05/anja/SUBARU/' + cluster + '/' + filt + '/SCIENCE/coadd_' + cluster + '_all/coadd.fits'
iraf.imcopy(bigfile + bounds, fitsfile)
import commands
seeing = commands.getoutput('gethead ' + bigfile + ' SEEING')
print 'seeing', seeing
import os
#os.system("ds9 " + fitsfile + " -view info no -view panner no -view magnifier no -view buttons no -view colorbar yes -view horzgraph no -view wcs no -view detector no -view amplifier no -view physical no -zoom to fit -minmax -histequ -invert -zoom to fit -saveas jpeg " + jpg ) # -quit >& /dev/null &")
#os.system("xpaset -p ds9 " + fitsfile + " -zoom to fit -view colorbar no -minmax -histequ -invert -zoom to fit -saveas jpeg " + jpg + " ") # -quit >& /dev/null &")
print 'bounds', bigfile + bounds
com = [
'file ' + fitsfile, 'zoom to fit', 'view colorbar no',
'minmax', 'scale histequ', 'saveimage jpeg ' + jpg
] # -quit >& /dev/null &")
for c in com:
z = 'xpaset -p ds9 ' + c
print z
os.system(z)
print jpg
text += '<td><img height=200px src=' + str(
SeqNr) + 'cutout' + filt + '.jpg></img></td>\n'
textlabel += '<td>' + filt + ' seeing ' + seeing + '</td>\n'
text += '<tr>' + textim + '</tr><tr>' + textlabel + '</tr></table></td></tr><tr>'
#os.system('stiff ' + image_seg + ' -OUTFILE_NAME ' + image_seg.replace('fits','tif'))
gals.append([line['BPZ_T_B'], text])
from datetime import datetime
t2 = datetime.now()
file = os.environ[
'sne'] + '/photoz/' + cluster + '/' + SPECTRA + '/objects.html'
print file
page = open(file, 'w')
t = '<head><link href="http://www.slac.stanford.edu/~pkelly/photoz/table.css" rel="stylesheet" type="text/css"></head>'
t += '<table align=left><tr><td colspan=5 class="dark"><h1>' + cluster + '</h1></td></tr><tr><td colspan=5><h4>created ' + t2.strftime(
"%Y-%m-%d %H:%M:%S"
) + '</h4></td></tr><tr><td colspan=5><a href=stars.html>Stellar Color-Color Plots</a><td></tr>\n'
if type == 'spec':
t += '<tr><td colspan=5 class="dark"><h2>Spectroscopic Sample</h2></td></tr>\n'
t += '<tr><td colspan=10 align=left><img height=400px src=RedshiftErrors.png></img>\n'
t += '<img height=400px src=RedshiftScatter04.png></img>\n'
t += '<img height=400px src=RedshiftScatter01.png></img>\n'
t += '<img height=400px src=RedshiftPDZ01.png></img></td></tr>\n'
if type == 'rand':
t += '<tr><td colspan=5 class="dark"><h2>Random Sample of 100 Galaxies</h2></td></tr>\n'
if type == 'picks':
t += '<tr><td colspan=5 class="dark"><h2>Pick</h2></td></tr>\n'
page.write(t)
gals.sort()
for gal in gals:
page.write(gal[1])
page.write('<table>\n')
page.close()
print 'CLOSED!!'
if len(gals) > 100:
break
''' make SED plots '''
M9 = n.fromfile('1024_1200Mpc_lc_z7.1.dens', dtype='<f8', count=N**2)
I9.shape = M9.shape = (N, N)
C = lambda z: 26 * n.sqrt((1 + z) / 10)
X, R = n.mgrid[:N, :N]
R = DM(7.1) + R * Dx / N
Z = z(R)
T = (1 + M9) * (1 - I9) * C(Z)
X *= Dx / N
p.figure(facecolor='k', edgecolor='k')
Theta = n.zeros((N, N))
for i in range(N):
for j in range(N):
Theta[i, j] = r2theta(X[i, j],
Z[i, j]) * 180 / n.pi #compute theta in degrees
ax = p.axes(axisbg='k')
for line in ax.yaxis.get_ticklines():
# line is a matplotlib.lines.Line2D instance
line.set_color('w')
# line.set_markersize(25)
# line.set_markeredgewidth(3)
for line in ax.xaxis.get_ticklines():
line.set_color('w')
p.pcolor(Theta, Z, T, cmap='gist_heat', vmin=0)
p.colorbar(orientation='horizontal')
p.xlabel('degrees')
p.ylabel('z')
p.show()
P.rc('font', size=9)
P.figure(figsize=(6,8))
P.subplots_adjust(hspace=.5, bottom=.03, top=.96)
for im in xrange(nmode):
P.subplot(nmode,2,im*2+1)
P.plot(eof[im].filled())
P.title('EOF %i'%(im+1))
P.subplot(nmode,2,im*2+2)
P.plot(pc[im].filled())
P.title('PC %i'%(im+1))
P.savefig(__file__[:-2]+'out.png')
P.figure(figsize=(6,8))
P.subplots_adjust()
P.subplot(211)
P.pcolor(var.filled()-var.filled().mean(0))
P.colorbar()
P.title('Original')
P.subplot(212)
P.pcolor(rec.filled())
P.colorbar()
P.title('Rec%i'%nmode)
P.savefig(__file__[:-2]+'outrec.png')
#P.show()
# We will be suing minisom library here
from minisom import MiniSom
# Out dataset is small
# So we will just create a 10 by 10 matrix, X = 10, y = 10
# Input_len = number of features in our dataset 14+1=15
# Sigma: Radious in the different neighborhoods in the grid
minisom = MiniSom(x=10, y=10, input_len=15, sigma=1.0, learning_rate=0.5)
minisom.random_weights_init(X)
minisom.train_random(data=X, num_iteration=200)
# Visualize the SOM
from pylab import bone, pcolor, colorbar, plot, show
bone()
pcolor(minisom.distance_map().T)
colorbar() # Color close to white are frauds
markers = ["o", "s"] # s=square
colors = ["r", "g"] # red = didn't get approval, green=got approval
for i, x in enumerate(X):
winning_node = minisom.winner(x)
plot(
winning_node[0] + 0.5, # placing to center using .5
winning_node[1] + 0.5,
markers[y[i]],
markeredgecolor=colors[y[i]],
markerfacecolor="None",
markersize=10,
markeredgewidth=2)
show()
# - populate relevant fields with actual data from the dictionaries
max_size = max([max(d.keys()) for d in count_dicts])
count_arrays = [[0] * (max_size + 1) for i in range(num_files)]
for i in range(0, num_files):
for key in count_dicts[i]:
count_arrays[i][key] = count_dicts[i][key]
# And now print it all out
print num_files, "rows,", max_size, "columns."
# for i in range(0, num_files):
# for j in range(0, max_size):
# print str(count_arrays[i][j]),
# print
# Now we graph it!
# We actually graph the transpose of the log of the matrix + 1
flame_graphable = (np.log(np.add(count_arrays, 1))).conj().transpose()
pl.hot()
flame_graph = pl.pcolor(flame_graphable)
pl.ylim((0, max_size))
pl.xlim((0, num_files))
pl.savefig(outfilename)
if options.showgraph:
pl.show()
pos = util.get_realdata(True)
neg = util.get_realdata(False)
traindatList[i] = concatenate((pos, neg), axis=1)
trainfeatList[i] = util.get_realfeatures(pos, neg)
trainlabsList[i] = util.get_labels(True)
trainlabList[i] = util.get_labels()
kernelList[i] = GaussianKernel(trainfeatList[i], trainfeatList[i], width)
svmList[i] = LibSVM(10, kernelList[i], trainlabList[i])
for i in range(num_svms):
print "Training svm nr. %d" % (i)
currentSVM = svmList[i]
currentSVM.train()
print currentSVM.get_num_support_vectors()
print "Done."
x, y, z = util.compute_output_plot_isolines(currentSVM, kernelList[i],
trainfeatList[i])
subplot(num_svms / 2, 2, i + 1)
pcolor(x, y, z, shading='interp')
contour(x, y, z, linewidths=1, colors='black', hold=True)
scatter(traindatList[i][0, :],
traindatList[i][1, :],
s=20,
marker='o',
c=trainlabsList[i],
hold=True)
axis('tight')
connect('key_press_event', util.quit)
show()
sc = MinMaxScaler(feature_range=(0, 1))
X = sc.fit_transform(X)
# Training the SOM
from minisom import MiniSom
som = MiniSom(x=10, y=10, input_len=15, sigma=1.0, learning_rate=0.5)
#x,y is dimension of som
#input len is feature here 15 because to catch faruad so use ID also,sigma is radius ,l_r is how much weight iterate for each iteration
#higher l_r fastely get O/P
som.random_weights_init(X) #ransom weights
som.train_random(data=X, num_iteration=100)
# Visualizing the results
from pylab import bone, pcolor, colorbar, plot, show
bone() #get blank window
pcolor(som.distance_map().T) #transpose of dis vector
colorbar() #legend highest distance then 1
markers = ['o', 's']
colors = ['r', 'g'] #red circle not approved
for i, x in enumerate(X): #i is 1,2,3...,x is vector of values
w = som.winner(x)
plot(
w[0] + 0.5,
w[1] + 0.5, #centre
markers[y[i]], #gives approved or not
markeredgecolor=colors[y[i]],
markerfacecolor='None', #inside color
markersize=10,
markeredgewidth=2)
show()
def prettyplot(f):
xx, yy = pylab.meshgrid(pylab.linspace(-range_,range_, 100),
pylab.linspace(-range_,range_, 100))
zz = pylab.zeros(xx.shape)
for i in range(xx.shape[0]):
for j in range(xx.shape[1]):
zz[i,j] = f(np.array([xx[i,j], yy[i,j]]))
pylab.pcolor(xx,yy,zz, cmap='RdBu', vmin=-range_, vmax=range_)
pylab.colorbar()
plt.xlim(-1, 1)
plt.ylim(-1, 1)
plt.xlabel(r'$x_1$')
plt.ylabel(r'$x_2$')
plt.title('Training data')
plt.savefig('figs/orig_data.eps')
plt.savefig('figs/orig_data.pdf')
plt.savefig('figs/orig_data.png')
trainx, trainy = pylab.meshgrid(pylab.linspace(-1,1, 25),
pylab.linspace(-1,1, 25))
modelParams = {'model':'dgp',
'maxiter': 300,
'minibatch_size': 300,
'layer_types': ['gp', 'noisy', 'gp', 'noisy'],
'layer_nodes': [2, 1, 2, 1],
'early_stopping': False}
training_data = []
training_targets = []
for i in range(trainx.shape[0]):
for j in range(trainx.shape[1]):
training_data.append([trainx[i, j], trainy[i, j]])
training_targets.append(f(np.array([trainx[i,j], trainy[i,j]])).flatten())
model = GPNetwork(np.array(training_data), np.array(training_targets), modelParams)
zz = pylab.zeros(xx.shape)
data = []
for i in range(xx.shape[0]):
for j in range(xx.shape[1]):
data.append([xx[i,j], yy[i,j]])
data = np.array(data)
model.session.run(model.set_for_training.assign(0.0))
fd = {model.data_placeholder: data}
pred = model.session.run((model.output_mean),
feed_dict=fd)
k = 0
for i in range(xx.shape[0]):
for j in range(xx.shape[1]):
zz[i, j] = pred[k, 0]
k += 1
pylab.figure()
pylab.pcolor(xx,yy,zz, cmap='RdBu', vmin=-range_, vmax=range_)
pylab.colorbar()
plt.xlim(-1, 1)
plt.ylim(-1, 1)
plt.title('DGP model')
plt.xlabel(r'$x_1$')
plt.ylabel(r'$x_2$')
plt.savefig(r'figs/dgp_model.eps')
plt.savefig(r'figs/dgp_model.pdf')
plt.savefig(r'figs/dgp_model.png')
for i, k in [(1, 0), (1, 1), (3, 0)]:
modelplot(model, model.layers[i].nodes[k], xx, yy, 'layer{0}node{1}'.format(i, k))
os.getcwd()
os.chdir('/disk/plasma2/jaa/CB8WAVES/CB8waves_04/Current_along_box')
#Plots of the curls
################################################################################################
for i in range(10):
nn= int(i)
fig, ax0 = plt.subplots()
im = plt.pcolor(J_sheet_2_Uri[:,:,nn]) #plot in the 65 (middle)
fig.colorbar(im, ax=ax0)
ax0.set_title('Current_sheet')
fig.savefig("current"+ str(nn)+".png", bbox_inches='tight')
###############################################################################
pylab.pcolor(divB[:,:,15], cmap='bwr')
pylab.colorbar()
pylab.title('Div B')
#pylab.savefig('120_curlBzVi.png')
pylab.show()
pylab.pcolor(divB2[:,:,15], cmap='bwr')
pylab.colorbar()
pylab.title('Div B')
#pylab.savefig('120_curlBzVi.png')
pylab.show()
pylab.pcolor(divBx[:,:,100], cmap='bwr')
pylab.colorbar()
pylab.title('Div B')
#pylab.savefig('120_curlBzVi.png')
a.append(-1.0)
metrics.append(a)
fig1 = pylab.figure(1)
ax = fig1.add_subplot(1, 1, 1)
rect = ax.patch
rect.set_facecolor('lightgray')
colors = [('black')] + [(pylab.cm.jet(i))
for i in xrange(1, 255)] + [('white')]
new_map = matplotlib.colors.LinearSegmentedColormap.from_list('new_map',
colors,
N=256)
mdata = pylab.array(metrics)
pylab.pcolor(mdata, cmap=new_map)
cbar = pylab.colorbar()
#cbar.set_label(cm)
pylab.xlabel('P/A')
labels = get_labels(xs)
pylab.xticks(labels[0], labels[1])
pylab.ylabel('Variance')
labels = get_labels(ys)
pylab.yticks(labels[0], labels[1])
#pylab.title('%s: %s\n%s'%(cm, cn, desc))
fig = pylab.gcf()
#fig.canvas.set_window_title('%s - %s (%s)'%(cn, desc, cm))
def r(d1,
d2,
boxsize=500.,
bin2fact=1. / 16.,
filename='',
getnuminbin=False,
overwrite=False,
getnumbin=False,
special='',
plotty=False):
ngrid = len(d1[:, 0, 0])
if (os.path.isfile(filename)) * (overwrite == False):
p = N.loadtxt(filename)
kmean = p[:, 0]
pk = p[:, 1]
numinbin = p[:, 2]
if (ngrid != len(d2[:, 0, 0])):
print 'arrays not the same size; quit'
return
d1k = N.fft.rfftn(d1)
d2k = N.fft.rfftn(d2)
s = d1.shape
sk = d1k.shape
#d1k = d1k.flatten()
#d2k = d2k.flatten()
if special == '':
dk2 = 0.5*(d1k*N.conjugate(d2k) + N.conjugate(d1k)*d2k)/\
N.sqrt(d1k*N.conjugate(d1k)*d2k*N.conjugate(d2k))
elif special == 'propagator':
#d1 must be initial conditions!
dk2 = 0.5*N.real((d1k*N.conjugate(d2k) + N.conjugate(d1k)*d2k)/\
(d1k*N.conjugate(d1k)))
elif special == 'amplitude':
dk2 = 0.5*(d1k*N.conjugate(d2k) + N.conjugate(d1k)*d2k)/\
(d1k*N.conjugate(d1k))
if (plotty):
M.clf()
M.pcolor(N.real(dk2[:, 0, :]))
M.colorbar()
dk2 = dk2.flatten()
a = N.fromfunction(lambda x, y, z: x, sk)
a[N.where(a > s[0] / 2)] -= s[0]
b = N.fromfunction(lambda x, y, z: y, sk)
b[N.where(b > s[1] / 2)] -= s[1]
c = N.fromfunction(lambda x, y, z: z, sk)
c[N.where(c > s[2] / 2)] -= s[2]
kmin = 2. * N.pi / boxsize
k = kmin * N.sqrt((a**2 + b**2 + c**2).flatten())
index = N.argsort(k)
k = k[index]
dk2 = dk2[index]
c0 = 0. * c.flatten() + 1.
c0[N.where(c.flatten() == 0.)] -= 0.5
c0 = c0[index]
# half-count cells on the z-axis
log2 = N.log(2.)
binedges = kmin * 2.**N.arange(-bin2fact / 2.,
N.log(k[-1] / kmin) / log2, bin2fact)
cuts = N.searchsorted(k, binedges)
numinbin = 0. * binedges
pk = 0. * binedges
kmean = 0. * binedges
nbins = len(binedges)
for i in N.arange(0, nbins - 1):
if (cuts[i + 1] > cuts[i]):
numinbin[i] = N.sum(c0[cuts[i]:cuts[i + 1]])
pk[i] = N.sum(c0[cuts[i]:cuts[i + 1]] * dk2[cuts[i]:cuts[i + 1]])
kmean[i] = N.sum(c0[cuts[i]:cuts[i + 1]] * k[cuts[i]:cuts[i + 1]])
wn0 = N.where(numinbin > 0.)[0]
pk = pk[wn0]
kmean = kmean[wn0]
numinbin = numinbin[wn0]
pk /= numinbin
kmean /= numinbin
#pk *= boxsize**3/N.prod(N.array(s).astype(float))**2
if filename != '':
N.savetxt(filename, N.transpose([kmean, pk, numinbin]))
if (getnumbin):
return kmean, pk, getnumbin
else:
return kmean, pk
def MirrorPressurecontour_N_Pressureslice(current_data):
from pylab import linspace, plot, subplot, pcolor, contour, contourf, annotate, text, cm, colorbar, show, xlabel, ylabel, xticks, yticks
from pylab import subplots, ylim, xlim, setp, annotate, text, get, subplot2grid, axes, gca, title
import matplotlib.ticker as ticker
from clawpack.visclaw import colormaps as cmaps
xx = current_data.x
yy = current_data.y
dy = abs(yy[1, 1] - yy[1, 2])
q = current_data.q # solution when this function called
aux = current_data.aux
gamma = aux[0, :, :]
gamma1 = aux[0, :, :] - 1.0
pinf = aux[1, :, :]
omega = aux[2, :, :]
rho = q[0, :, :] # density
momx = q[1, :, :] # momentum
momy = q[2, :, :]
ene = q[3, :, :] # energy
P = gamma1 * (ene - 0.5 *
(momx * momx + momy * momy) / rho) #/(1.0 - omega*rho)
P = P - gamma * pinf
# Convert to PSI
P = P * 0.000145038 - 14.6959488
x = [-0.0085, -0.0085, 0.0085, 0.0085]
x = [zz - 0.0 for zz in x]
y = [0.0, 0.0085, 0.0085, 0.0]
y2 = [-zz for zz in y]
s1 = subplot2grid((5, 16), (0, 0), colspan=14,
rowspan=3) # subplot(211)
plot(x, y, 'k', linewidth=2.0)
plot(x, y2, 'k', linewidth=2.0)
locator = ticker.MaxNLocator(
20) # if you want no more than 10 contours
locator.create_dummy_axis()
#For Pa
#locator.set_bounds(90000, 300000)
# For PSI
locator.set_bounds(-20, 30)
levs = locator()
#f, (ax1, ax2) = subplots(2, sharex=True,sharey=True,subplot_kw=dict(adjustable='datalim', aspect='equal'))
#OTHER colormap: cmap = camps.schlieren_grays
cont1 = contourf(xx, yy - 0.5 * dy, P, levs, alpha=.75, cmap=cm.Blues)
cont2 = contourf(xx,
-(yy - 0.5 * dy),
P,
levs,
alpha=.75,
cmap=cm.Blues)
# for PSI or Pascals
pcolor(xx, yy - 0.5 * dy, P, cmap=cm.Blues, vmin=-20, vmax=30)
pcolor(xx, -(yy - 0.5 * dy), P, cmap=cm.Blues, vmin=-20, vmax=30)
s1.set_xlim([-0.03, 0.03])
s1.set_ylim([-0.02, 0.02])
# Convert axis to cm
xxticks = np.arange(xx.min(), xx.max(), 0.01)
labelsx = range(0) #range(xxticks.size)
labelsx[:] = [x - 3 for x in labelsx]
xticks(xxticks, labelsx)
yyticks = np.arange(-yy.max(), yy.max(), 0.01)
labelsy = range(yyticks.size)
labelsy[:] = [x - 2 for x in labelsy]
yticks(yyticks, labelsy)
#xlabel('cm',fontsize='13',fontweight='bold')
ylabel('cm', fontsize='13', fontweight='bold')
title('Pressure contours (2D) & pressure slice (1D)',
fontweight='bold')
#pcolor(xx,yy-0.5*dy,P,cmap=cm.Blues, vmin=90000, vmax=300000)
#pcolor(xx,-(yy-0.5*dy),P,cmap=cm.Blues, vmin=90000, vmax=300000)
#colorbar()
contour(xx, yy - 0.5 * dy, P, levs, colors='black', linewidth=0.5)
contour(xx, -(yy - 0.5 * dy), P, levs, colors='black', linewidth=0.5)
s2 = subplot2grid((5, 16), (3, 0), colspan=14,
rowspan=2) #subplot(212)
x_slice, P_slice = xsec(current_data)
plot(x_slice, P_slice, 'k-')
s2.set_xlim([-3, 3])
s2.set_ylim([-20, 30])
#ax1.ylim(-20,30)
#s2.set_xlim([-3.0,3.0])
#s2.set_ylim([-20,30])
#gcs = 2.0/200.0
x = [-0.85, -0.85, 0.85, 0.85]
y = [-100, 100, 100, -100]
#y[:] = [xx - gcs for xx in y]
plot(x, y, 'k', linewidth=2.0)
xlabel('cm', fontsize='13', fontweight='bold')
ylabel('psi', fontsize='13', fontweight='bold')
#title('Pressure slice')
xcav = [-3.0, 3.0]
ycav = [
-14.334351113, -14.334351113
] #Water vapour pressure for cavitation at room temp in 1atm=0 ref system
plot(xcav, ycav, 'b--')
#plot(-8.0, 180000, 'vk', markersize=10)
#plot(-2.0, 180000, 'vk', markersize=10)
#plot(0.0, 180000, 'vk', markersize=10)
#plot(2.0, 180000, 'vk', markersize=10)
text(-0.75, 25, 'Water', fontweight='bold', fontsize=13)
#text(-0.8,285000,'PS',fontweight='bold',fontsize=20)
text(-2.9, 25, 'Air', fontweight='bold', fontsize=13)
text(0.95, 25, 'Air', fontweight='bold', fontsize=13)
text(1.2,
-13,
'Vapor pressure',
fontweight='bold',
fontsize=13,
color='blue')
s3 = subplot2grid((5, 16), (0, 15), rowspan=5)
from mpl_toolkits.axes_grid1 import make_axes_locatable
divider = make_axes_locatable(gca())
cax = divider.append_axes("right", "5%", pad="3%")
cax.axis('off')
cbar = colorbar(
cont1, cax=s3
) #,orientation='horizontal') #, shrink=0.99) #,location='eastoutside') #orientation='horizontal')
cbar.ax.set_xlabel('psi',
fontsize='13',
fontweight='bold',
rotation='horizontal')
def draw():
PL.cla()
PL.pcolor(grid, vmin=0, vmax=1, cmap=PL.cm.binary)
PL.axis('image')
PL.title('t = ' + str(time))
reglon = reshape(glon, (Mx, My))
# Plot areas where thickness and PISM mask are appropriate,
# and filter out RIGGS points that are outside the model domain,
# and use location of calving front from pismaccur flag, which is
# interpolated by PISM from original ross.nc file "accur" flag.
cbar_masked = ma.array(cbar,
mask=(mask != 3) + (H < 20.0) +
((pismaccur < 0.01) & (reglat < -11.0) &
(reglon < 1.0)))
# show computed speed as color
figure(1, figsize=(9, 8))
clf()
hold(True)
pcolor(gridlon, gridlatext, cbar_masked)
colorbar()
# compute grid lat and lon of RIGGS points (in deg,min,sec in .dat file);
RIGGSlat = -(RIGGS[:, 3] + RIGGS[:, 4] / 60 + RIGGS[:, 5] / (60 * 60))
RIGGSlon = RIGGS[:, 6] + RIGGS[:, 7] / 60 + RIGGS[:, 8] / (60 * 60)
RIGGSlon = -RIGGSlon * RIGGS[:, 9]
# RIGGS[:,9] is +1 if W, -1 if E
# throw out the ones which are not in model domain; 132 (131?) remain
cbar_masked = cbar_masked.filled(-20)
# triangulate data
tri = Triangulation(glon, glat)
cRIGGS = tri.nn_interpolator(cbar_masked.flat)(RIGGSlon, RIGGSlat)
rig = RIGGS[cRIGGS > 0]
data = np.zeros((width, height))
# torch coordinates
XX, YY = np.meshgrid(np.arange(width) + 1.5, np.arange(height) + 1.5)
# note that the torch indices are one based
# so we subtract one here
baseIndex = firstIndices[photonIndex] - 1
for i in range(numRecHits[photonIndex]):
xc = xcoords[baseIndex + i] - 1
yc = ycoords[baseIndex + i] - 1
assert xc >= 0
assert xc < width
assert yc >= 0
assert yc < height
data[yc, xc] = energies[baseIndex + i]
# plot the matrix
pylab.figure()
pylab.pcolor(XX, YY, data, cmap=pylab.cm.Blues)
pylab.title("index " + str(photonIndex) + " (label=" +
str(labels[photonIndex]) + ")")
pylab.grid()
pylab.show()
# standard exploration is e-greedy, but a different type can be chosen as well
# learner.explorer = BoltzmannExplorer()
# create agent
agent = LearningAgent(table, learner)
# create experiment
experiment = Experiment(task, agent)
# prepare plotting
pylab.gray()
pylab.ion()
#for i in range(100):
while True:
# interact with the environment (here in batch mode)
experiment.doInteractions(matrix_size)
agent.learn()
agent.reset()
# and draw the table
print table.params.reshape(matrix_size,2)
#print table.params.reshape(matrix_size,matrix_size)
pylab.pcolor(table.params.reshape(matrix_size,2).max(1).reshape(matrix_size,1))
#pylab.pcolor(table.params.reshape(matrix_size,matrix_size).max(1).reshape(matrix_size,1))
pylab.draw()
pylab.ion()
pylab.show()
print "training complete"
def plot_flc_haplotypes(snps,
accessions=None,
positions=None,
dist_measure="identity",
correctScale=False,
haplotypeFile=None,
treeFile=None,
acc_250k=None,
perlegen_acc=None,
flc_250K_positions=None):
"""
080609 created.
dist_measure: type of distance metric used for clustering.
"""
import numpy as np
import scipy as sp
import scipy.cluster.hierarchy as hc
if dist_measure == "identity":
a = identity_metric(snps)
elif dist_measure == "":
pass
Z = hc.average(a) #Performing clustering using the dist. matr.
import pylab
#hc.leaders(Z)
dend_dict = hc.dendrogram(Z, labels=accessions)
new_acc_order = dend_dict['ivl']
#print new_acc_order
#print accessions
if treeFile:
pylab.savefig(treeFile, format='pdf')
acc_mapping = []
for acc in accessions:
i = new_acc_order.index(acc)
acc_mapping.append(i)
new_snps = []
for snp in snps:
new_snp = [0] * len(snp)
for (nt, i) in zip(snp, acc_mapping):
new_snp[i] = nt
new_snps.append(new_snp)
snps = sp.array(snps)
class _ntDict_(dict):
def __missing__(self, key):
return 0.0
nt_map = _ntDict_()
d = {"N": 0.0, "NA": 0.0, "-": 5.0, "A": 1.0, "C": 2.0, "G": 3.0, "T": 4.0}
for key in d:
#print key,d[key]
nt_map[key] = d[key]
for i, nt in enumerate(snps.flat):
#print nt,nt_map[nt]
snps.flat[i] = nt_map[nt]
# for i,nt in enumerate(snps.flat):
# if nt=='-':
# snps.flat[i]=5.0
snps = snps.astype(float)
#print snps
for i in range(0, len(snps), 500):
pylab.clf()
fig = pylab.figure(figsize=(16, 5))
ax1 = pylab.axes([0.06, 0.05, 1.0, 0.9])
new_snps = snps[i:i + 500]
if positions: #Prepare SNPs
x_s = np.zeros((len(new_snps) + 1, len(new_snps[0, ]) + 1))
start_pos = positions[0] - (0.5 * (positions[1] - positions[0]))
print len(x_s), len(x_s[0, ])
for j in range(0, len(x_s[0, ])):
x_s[0, j] = start_pos
for j in range(1, len(x_s) - 1): # number of SNPs
x = positions[j - 1] + 0.5 * (positions[j] - positions[j - 1])
for k in range(0, len(x_s[j, ])): # number of NTs
x_s[j, k] = x
for j in range(0, len(x_s[0, ])):
x_s[-1, j] = positions[-1] + (0.5 *
(positions[-1] - positions[-2]))
y_s = np.zeros((len(new_snps) + 1, len(new_snps[0, ]) + 1))
for j in range(0, len(y_s)): # number of SNPs
for k in range(0, len(y_s[j, ])): # number of NTs
y_s[j, k] = k - 0.5
#import pdb
#pdb.set_trace()
# z_s = []
# print len(new_snps)
# for j in range(0,len(new_snps)): # number of SNPs
# pos = positions[j]
# for k in range(0,len(new_snps[j,])): # number of NTs
# z_s.append(new_snps[j,k])
pylab.pcolor(x_s, y_s, new_snps)
else:
pylab.pcolor(new_snps.transpose())
yticks, labels = pylab.yticks(range(0, len(accessions)),
accessions,
size="medium")
for acc_i in range(0, len(accessions)):
if acc_i in acc_250k:
yticks[acc_i].label1.set_color("blue")
for pos in flc_250K_positions:
pylab.plot([pos, pos], [-2, -1], color="black")
x_range = (x_s[-1, 0] - x_s[0, 0])
y_range = len(accessions)
pylab.axis((x_s[0, 0] - 0.05 * x_range, x_s[-1, 0] + 0.05 * x_range,
-2 - 0.05 * y_range, len(accessions) + 0.05 * y_range))
cbar = pylab.colorbar(ticks=[0, 1, 2, 3, 4, 5])
cbar.ax.set_yticklabels(['NA', 'A', 'C', 'G', 'T',
'-']) # horizontal colorbar
#pylab.subplot(2,1,2)
#ax2 = pylab.axes([0.06,0.04,1.0,0.05],frameon=False)
# ax2.spines['left'].set_color('none')
# ax2.spines['right'].set_color('none')
# ax2.spines['bottom'].set_color('none')
# ax2.spines['top'].set_color('none')
#for pos in flc_250K_positions:
# ax2.plot([pos,pos],[0,1])
#ax2.axis((x_s[0,0]-0.05*x_range,x_s[-1,0]+0.05*x_range,-0.05,1.05))
#Add some more features to the figure...
if haplotypeFile:
pylab.savefig(haplotypeFile + "_" + str(i) + ".pdf", format='pdf')
else:
pylab.show()
pylab.clf()
# Training the SOM
# we will use another developer impelmentation for the moment (minisom.py file)
from minisom import MiniSom
# the dimntions of the map (10*10)
# the input length (the number of features)
som = MiniSom(x=10, y=10, input_len=15, sigma=1.0, learning_rate=0.5)
som.random_weights_init(X)
som.train_random(data=X, num_iteration=100)
# visualizaing the results
from pylab import bone, pcolor, colorbar, plot, show
bone()
pcolor(som.distance_map().T) # for the pcolor take the transpose
colorbar()
markers = ['o', 's'] # o means circle and S means square
colors = ['r', 'g'] # green and red colors
for i, x in enumerate(
X): # i is the idx for customer and x is the vector of [i] (the row)
w = som.winner(x) # get the winning node of the customer with vector x
plot(w[0] + 0.5,
w[1] + 0.5,
markers[y[i]],
markeredgecolor=colors[y[i]],
markerfacecolor='None',
markersize=10,
markeredgewidth=2)
show()
def plot_local_haplotypes(filename,
marker_data,
focal_start,
focal_end,
error_tolerance=0,
phenotypeData=None,
phen_id=None):
"""
Plots certain types of haplotype plots...
"""
haplotype_ids = range(1000, 0, -1)
#Fill color matrix up..
start_i = 0
cur_pos = 0
while start_i < len(marker_data.positions) and cur_pos < focal_start:
cur_pos = marker_data.positions[start_i]
start_i += 1
if start_i == len(marker_data.positions):
raise Exception("Region is not covered by markers.")
end_i = start_i
while end_i < len(marker_data.positions) and cur_pos < focal_end:
cur_pos = marker_data.positions[end_i]
end_i += 1
center_haplotypes = []
for a_i in range(len(marker_data.accessions)):
haplotype = []
for snp in marker_data.snps[start_i:end_i]:
haplotype.append(snp[a_i])
center_haplotypes.append(haplotype)
haplotype_dict = {}
hap_pos = (marker_data.positions[end_i - 1] +
marker_data.positions[start_i]) / 2
for a_i, c_h in enumerate(center_haplotypes):
ch = tuple(c_h)
if not ch in haplotype_dict:
haplotype_dict[ch] = [
0, 0, [a_i], hap_pos
] #haplotype id number, haplotype frequency count, list of accessions indices, and position.
else:
haplotype_dict[ch][2].append(a_i)
freq_hapl_list = []
for ch in haplotype_dict:
hi = haplotype_dict[ch]
haplotype_dict[ch][1] = len(hi[2])
freq_hapl_list.append((len(hi[2]), ch))
freq_hapl_list.sort(reverse=True)
for (hc, haplotype) in freq_hapl_list:
if hc == 1:
haplotype_dict[haplotype][0] = 0
else:
haplotype_dict[haplotype][0] = haplotype_ids.pop()
center_haplotype_dict = haplotype_dict
left_haplotypes = []
right_haplotypes = []
left_haplotypes.append(center_haplotype_dict)
right_haplotypes = []
left_positions = [hap_pos]
right_positions = []
#Starting with the haplotype structure to the left!
some_haplotype = True
i = start_i - 1
old_hap_dict = center_haplotype_dict
while old_hap_dict and i >= 0:
#print i
#l1 = [len(old_hap_dict[h][2]) for h in old_hap_dict]
#l2 = [old_hap_dict[h][0] for h in old_hap_dict]
#print l1,l2, sum(l1)
haplotype_dict = {}
hap_pos = marker_data.positions[i]
left_positions.append(hap_pos)
for hap in old_hap_dict:
(h_id, h_count, acc_indices,
pos) = old_hap_dict[hap] #info on the old haplotype
#print h_id
temp_hap_dict = {}
for a_i in acc_indices:
new_hap = tuple([marker_data.snps[i][a_i]] + list(hap))
if not new_hap in temp_hap_dict:
temp_hap_dict[new_hap] = [
0, 0, [a_i], hap_pos
] #haplotype id number, haplotype frequency count, list of accessions indices, and position.
else:
temp_hap_dict[new_hap][2].append(a_i)
freq_hapl_list = []
for h in temp_hap_dict:
hi = temp_hap_dict[h]
temp_hap_dict[h][1] = len(hi[2])
freq_hapl_list.append((len(hi[2]), h))
freq_hapl_list.sort()
#print freq_hapl_list
(hc, h) = freq_hapl_list.pop(
) #the most frequent haplotype gets colored like the last one.
if hc == 1:
del temp_hap_dict[h]
else:
temp_hap_dict[h][0] = h_id
freq_hapl_list.reverse()
for (hc, h) in freq_hapl_list:
if hc == 1:
del temp_hap_dict[h]
else:
temp_hap_dict[h][0] = haplotype_ids.pop()
for h in temp_hap_dict:
haplotype_dict[h] = temp_hap_dict[h]
if haplotype_dict:
left_haplotypes.append(haplotype_dict)
old_hap_dict = haplotype_dict
i -= 1
#Now the same with the haplotype structure to the right!
i = end_i
old_hap_dict = center_haplotype_dict
while old_hap_dict and i < len(marker_data.snps):
#print i
#l1 = [len(old_hap_dict[h][2]) for h in old_hap_dict]
#l2 = [old_hap_dict[h][0] for h in old_hap_dict]
#print l1,l2, sum(l1)
haplotype_dict = {}
hap_pos = marker_data.positions[i]
right_positions.append(hap_pos)
for hap in old_hap_dict:
(h_id, h_count, acc_indices,
pos) = old_hap_dict[hap] #info on the old haplotype
temp_hap_dict = {}
for a_i in acc_indices:
nt = marker_data.snps[i][a_i]
new_hap = list(hap)
new_hap.append(nt)
new_hap = tuple(new_hap)
#print new_hap
if not new_hap in temp_hap_dict:
temp_hap_dict[new_hap] = [
0, 0, [a_i], hap_pos
] #haplotype id number, haplotype frequency count, list of accessions indices, and position.
else:
temp_hap_dict[new_hap][2].append(a_i)
freq_hapl_list = []
for h in temp_hap_dict:
hi = temp_hap_dict[h]
temp_hap_dict[h][1] = len(hi[2])
freq_hapl_list.append((len(hi[2]), h))
freq_hapl_list.sort()
(hc, h) = freq_hapl_list.pop(
) #the most frequent haplotype gets colored like the last one.
if hc == 1:
del temp_hap_dict[h]
else:
temp_hap_dict[h][0] = h_id
freq_hapl_list.reverse()
for (hc, h) in freq_hapl_list:
if hc == 1:
del temp_hap_dict[h]
else:
temp_hap_dict[h][0] = haplotype_ids.pop()
for h in temp_hap_dict:
haplotype_dict[h] = temp_hap_dict[h]
if haplotype_dict:
right_haplotypes.append(haplotype_dict)
old_hap_dict = haplotype_dict
i += 1
#Clustering...
dm = calc_local_dist(marker_data,
focal_start,
focal_end,
error_tolerance=error_tolerance)
print dm
import scipy as sp
import scipy.cluster.hierarchy as hc
Z = hc.average(dm) #Performing clustering using the dist. matr.
print Z
import pylab
dend_dict = hc.dendrogram(Z, labels=marker_data.accessions)
new_acc_order = dend_dict['ivl']
print new_acc_order
ai_map = [new_acc_order.index(acc) for acc in marker_data.accessions]
import numpy as np
#Updating the positions in the figure.
left_positions.reverse()
positions = left_positions + right_positions
x_s = np.zeros((len(positions) + 1, len(marker_data.accessions) + 1))
start_pos = positions[0] - (0.5 * (positions[1] - positions[0]))
print len(x_s), len(x_s[0, ])
for j in range(0, len(x_s[0, ])):
x_s[0, j] = start_pos
for j in range(1, len(x_s) - 1): # number of SNPs
x = positions[j - 1] + 0.5 * (positions[j] - positions[j - 1])
for k in range(0, len(x_s[j, ])): # number of NTs
x_s[j, k] = x
for j in range(0, len(x_s[0, ])):
x_s[-1, j] = positions[-1] + (0.5 * (positions[-1] - positions[-2]))
y_s = np.zeros((len(positions) + 1, len(marker_data.accessions) + 1))
for j in range(0, len(y_s)): # number of SNPs
for k in range(0, len(y_s[j, ])): # number of NTs
y_s[j, k] = k - 0.5
#Updating the colors in the figure.
color_matrix = np.ones((len(positions), len(marker_data.accessions)))
left_haplotypes.reverse()
haplotypes = left_haplotypes + right_haplotypes
max_color = float(haplotype_ids.pop())
for i, hap_dict in enumerate(haplotypes):
for h in hap_dict:
(h_id, h_count, acc_indices, pos) = hap_dict[h]
for a_i in acc_indices:
m_ai = ai_map[a_i]
if h_id == 0:
color_matrix[i, m_ai] = 1.0
else:
color_matrix[i, m_ai] = h_id / max_color
import phenotypeData as pd
e_dict = pd._getEcotypeIdInfoDict_()
accessions = [
unicode(e_dict[int(e)][0], 'iso-8859-1') for e in new_acc_order
]
#Plot figure..
import pylab
pylab.figure(figsize=(18, 8))
pylab.axes([0.08, 0.06, 0.9, 0.88])
pylab.pcolor(x_s, y_s, color_matrix, cmap=pylab.cm.hot)
#Dealing with the phenotype data
phenotypeData.removeAccessionsNotInSNPsData(marker_data)
et_mapping = []
for i, et in enumerate(new_acc_order):
et_mapping.append((marker_data.accessions.index(et), i))
phenotypeData.orderAccessions(et_mapping)
phen_vals = phenotypeData.getPhenVals(phen_id, noNAs=False)
acc_strings1 = [
accessions[i] + ", " + str(phen_vals[i])
for i in range(len(accessions))
]
acc_strings = [
accessions[i] + ", " + str(phen_vals[i])
for i in range(len(accessions))
]
pylab.yticks(range(0, len(marker_data.accessions)),
acc_strings,
size="small")
x_range = (x_s[-1, 0] - x_s[0, 0])
#Retreiving and drawing the genes
import regionPlotter as rp
import gwaResults as gr
genes = gr.get_gene_list(start_pos=x_s[0, 0], end_pos=x_s[-1, 0], chr=5)
rp.drawGenes(genes, y_shift=-3, rangeVal=40)
pylab.axis((x_s[0, 0] - 0.05 * x_range, x_s[-1, 0] + 0.05 * x_range,
-0.1 * len(marker_data.accessions) - 1,
1.02 * len(marker_data.accessions)))
pylab.savefig(filename, format='pdf')
winning notes will be colored by different colors in such a way that the larger is
the MID, the closer to white the color will be.
"""
#------------------------------------------------------------------------------------
"""
we actually identified the outlier(fraud) in below.
to get the explicit list of the customers, we just need to the inverse mapping
of these winning nodes to see which customers are associated to this winning node.
also, we can add some markers to detect them in the map easily!
"""
# Visualizing the results
from pylab import bone, pcolor, colorbar, plot, show
bone() # this is the window that will contain the map.
pcolor(som.distance_map().T
) # all the different colors corresponding to the MID's.
colorbar() # white colors are the outliers (frauds).
markers = ['o',
's'] # red circles(r, o) : the customers who didn't get approval.
colors = ['r', 'g'] # green squares(g, s) : the customers who got approval.
for i, j in enumerate(
X): # i : indexes, j : all the vectors of customers at i.
w = som.winner(j) # winning node.
plot(
w[0] + 0.5, # we want to put the marker at the center of the square.
w[1] + 0.5, # we want to put the marker at the center of the square.
markers[y[i]],
markeredgecolor=colors[y[i]],
markerfacecolor='None',
markersize=10,
markeredgewidth=2)
if video == 1:
if os.path.exists('movie') == True:
pass
else:
os.mkdir('movie')
k = 0
while t <= ND:
[Grid, X, Y, timestep] = diff_eqs(Grid, timestep)
t += timestep
T.append(t)
k += 1
pl.clf()
pl.subplot(211)
pl.pcolor(Grid, cmap=pl.cm.jet)
pl.title('Forest-Fire Model')
pl.subplot(413)
pl.plot(T, X, color='g')
pl.ylabel('Susceptible')
pl.subplot(414)
pl.plot(T, Y, color='r')
pl.ylabel('Infected')
pl.xlabel('Time (days)')
pl.savefig("movie/frame_%04d.png" % k)
print(k)
## You will mencoder from mplayer for this to work
## With windows you have to modify the path
## With linux if you have mencoder istall usually it should work
def plot_haplotypes(snps,
accessions=None,
positions=None,
dist_measure="identity",
correctScale=False,
haplotypeFile=None,
treeFile=None,
with_genes=False,
chr=None):
"""
080109 created.
dist_measure: type of distance metric used for clustering.
"""
import numpy as np
import scipy as sp
import scipy.cluster.hierarchy as hc
if dist_measure == "identity":
a = identity_metric(snps)
Z = hc.average(a) #Performing clustering using the dist. matr.
print Z
import pylab
#hc.leaders(Z)
dend_dict = hc.dendrogram(Z, labels=accessions)
new_acc_order = dend_dict['ivl']
print new_acc_order
#print accessions
if treeFile:
pylab.savefig(treeFile, format='pdf')
acc_mapping = []
for acc in accessions:
i = new_acc_order.index(acc)
acc_mapping.append(i)
new_snps = []
for snp in snps:
new_snp = [0] * len(snp)
for (nt, i) in zip(snp, acc_mapping):
new_snp[i] = nt
new_snps.append(new_snp)
snps = new_snps
accessions = new_acc_order
snps = sp.array(snps)
class _ntDict_(dict):
def __missing__(self, key):
return 0.0
nt_map = _ntDict_()
d = {"N": 0.0, "NA": 0.0, "-": 5.0, "A": 1.0, "C": 2.0, "G": 3.0, "T": 4.0}
for key in d:
#print key,d[key]
nt_map[key] = d[key]
for i, nt in enumerate(snps.flat):
#print nt,nt_map[nt]
snps.flat[i] = nt_map[nt]
# for i,nt in enumerate(snps.flat):
# if nt=='-':
# snps.flat[i]=5.0
snps = snps.astype(float)
#Load genes..
if with_genes:
import gwaResults as gr
genes = gr.get_gene_list(chr=chr,
start_pos=min(positions),
end_pos=max(positions))
#print snps
for i in range(0, len(snps), 500):
pylab.clf()
if with_genes:
pylab.figure(figsize=(20, 7))
pylab.axes([0.04, 0.09, 1.0, 0.87])
else:
pylab.figure(figsize=(16, 5))
pylab.axes([0.06, 0.06, 1.0, 0.9])
new_snps = snps[i:i + 500]
if positions: #Prepare SNPs
x_s = np.zeros((len(new_snps) + 1, len(new_snps[0, ]) + 1))
start_pos = positions[0] - (0.5 * (positions[1] - positions[0]))
print len(x_s), len(x_s[0, ])
for j in range(0, len(x_s[0, ])):
x_s[0, j] = start_pos
for j in range(1, len(x_s) - 1): # number of SNPs
x = positions[j - 1] + 0.5 * (positions[j] - positions[j - 1])
for k in range(0, len(x_s[j, ])): # number of NTs
x_s[j, k] = x
for j in range(0, len(x_s[0, ])):
x_s[-1, j] = positions[-1] + (0.5 *
(positions[-1] - positions[-2]))
y_s = np.zeros((len(new_snps) + 1, len(new_snps[0, ]) + 1))
for j in range(0, len(y_s)): # number of SNPs
for k in range(0, len(y_s[j, ])): # number of NTs
y_s[j, k] = k - 0.5
#import pdb
#pdb.set_trace()
# z_s = []
# print len(new_snps)
# for j in range(0,len(new_snps)): # number of SNPs
# pos = positions[j]
# for k in range(0,len(new_snps[j,])): # number of NTs
# z_s.append(new_snps[j,k])
pylab.pcolor(x_s, y_s, new_snps)
x_range = (x_s[-1, 0] - x_s[0, 0])
pylab.axis(
(x_s[0, 0] - 0.05 * x_range, x_s[-1, 0] + 0.05 * x_range,
-0.1 * len(accessions) - 1, 1.1 * len(accessions)))
else:
pylab.pcolor(new_snps.transpose())
if with_genes:
import regionPlotter as rp
rp.drawGenes(genes, y_shift=-1.5)
pylab.yticks(range(0, len(accessions)), accessions, size="medium")
cbar = pylab.colorbar(ticks=[0, 1, 2, 3, 4, 5])
cbar.ax.set_yticklabels(['NA', 'A', 'C', 'G', 'T',
'-']) # horizontal colorbar
#pylab.subplot(2,1,2)
#Add some more features to the figure...
if haplotypeFile:
pylab.savefig(haplotypeFile + "_" + str(i) + ".pdf", format='pdf')
else:
pylab.show()
pylab.clf()
'/global/cscratch1/sd/petercal/ACME_simulations/edison.A_WCYCL1950.1950_aero4.ne30_oECv3_ICG/run/edison.A_WCYCL1950.1950_aero4.ne30_oECv3_ICG.cam.h0.0001-01-01-00000-rgr.nc'
)
x_old = f_orig.variables['SOLIN']
x_new = f_new['SOLIN']
lat = f_orig.variables['lat'][:]
lon = f_orig.variables['lon'][:]
LON, LAT = pl.meshgrid(lon, lat)
if x_old.shape[0] != x_new.shape[0]:
raise Exception('time dim of variables differs between runs')
pl.figure(1)
pl.subplot(2, 1, 1)
pl.pcolor(LON, LAT, x_old[-1].squeeze())
pl.colorbar()
pl.title('old')
pl.subplot(2, 1, 2)
pl.pcolor(LON, LAT, x_new[-1].squeeze())
pl.colorbar()
pl.title('new')
pl.savefig('SOLIN-1950-CMIP6.png')
#COMPARE MODEL INPUT:
#====================
fo = Dataset(
'/project/projectdirs/acme/inputdata/atm/cam/solar/Solar_1850control_input4MIPS_c20171101.nc'
)
lda.set_labels(labels)
lda.train(features)
# compute output plot iso-lines
xs = np.array(np.concatenate([x_pos, x_neg]))
ys = np.array(np.concatenate([y_pos, y_neg]))
x1_max = max(1.2 * xs)
x1_min = min(1.2 * xs)
x2_max = max(1.2 * ys)
x2_min = min(1.2 * ys)
x1 = np.linspace(x1_min, x1_max, size)
x2 = np.linspace(x2_min, x2_max, size)
x, y = np.meshgrid(x1, x2)
dense = RealFeatures(np.array((np.ravel(x), np.ravel(y))))
dense_labels = lda.apply(dense).get_labels()
z = dense_labels.reshape((size, size))
pcolor(x, y, z)
contour(x, y, z, linewidths=1, colors='black', hold=True)
axis([x1_min, x1_max, x2_min, x2_max])
connect('key_press_event', util.quit)
show()
# prepare plotting
# pylab.gray()
pylab.ion()
imax = 1000
for i in range(1, imax+1):
## interact with the environment (here in batch mode)
# experiment.doInteractions(100)
for j in range(100):
experiment.doInteractions(1)
# print( env )
agent.learn()
agent.reset()
# and draw the table
if i % 10 == 0:
field = table.params.reshape(81,4).max(1).reshape(9,9)
pylab.pcolor(field)
pylab.draw()
pylab.pause(0.000001)
if i % 100 == 0:
print(i, "/", imax)
print("Done")
pylab.ioff()
pylab.show()
# got features 6 and 13 - seem to be linearally correlated
# one more time
yind1 = random.randint(1,21)
yind2 = random.randint(1,21)
print "feature1= f" + str(yind1)
print "feature2= f" + str(yind2)
plt.figure()
plt.scatter(df.loc[:, "f"+str(yind1)],df.loc[:, "f"+str(yind2)], c='rg')
plt.xlabel('f' + str(yind1))
plt.ylabel('f' + str(yind2))
plt.title('f' + str(yind1) + ' vs f' + str(yind2))
plt.savefig('features_4.png')
plt.clf()
# got features 20 and 21 - tightly balled
# OK, so we see that some features are correlated (strongly, perhaps?) and might be
# redundant, while others aren't at all correlated. Also interesting...
# print out the correlation matrix
print "Correlation matrix: "
print df.corr()
# features 4, 5, 6 7, 11, 12, 13 are correlated (> 0.4) with the class data...
# It might be wise to use the least correlated features when classifying.
# Let's look at this in a heat map:
R = df.corr()
from pylab import pcolor, show, colorbar, xticks, yticks
from numpy import arange
pcolor(R)
colorbar()
yticks(arange(0.5,22.5),range(0,22))
xticks(arange(0.5,22.5),range(0,22))
show()
