def TestSceneEditRendering(cls, params):
engineType = params[0]
samplerType = params[1]
renderConfigAdditionalProps = params[2]
isDeterministic = params[3]
# Create the rendering configuration
cfgProps = pyluxcore.Properties()
cfgProps.SetFromFile("resources/scenes/simple/simple.cfg")
# Set the rendering engine
cfgProps.Set(pyluxcore.Property("renderengine.type", engineType))
# Set the sampler
cfgProps.Set(pyluxcore.Property("sampler.type", samplerType))
cfgProps.Set(renderConfigAdditionalProps)
cfgProps.Set(LuxCoreTest.customConfigProps)
config = pyluxcore.RenderConfig(cfgProps)
# Run the rendering
StandardAnimTest(
cls, "SceneEditRendering_" + engineType + ("" if not samplerType else
("_" + samplerType)),
config, 5, isDeterministic)
def render(self, blScene):
print("LuxCore render call")
scale = blScene.render.resolution_percentage / 100.0
self.filmWidth = int(blScene.render.resolution_x * scale)
self.filmHeight = int(blScene.render.resolution_y * scale)
########################################################################
# Do the rendering
########################################################################
imageBufferFloat = array('f', [0.0] *
(self.filmWidth * self.filmHeight * 3))
scene = self.ConvertBlenderScene(blScene)
config = pyluxcore.RenderConfig(self.CreateRenderConfigProps(), scene)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
while True:
time.sleep(0.5)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats()
print(
"[Elapsed time: %3d/5sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]"
%
(stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() /
1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() /
1000.0)))
# Update the image
session.GetFilm().GetOutputFloat(
pyluxcore.FilmOutputType.RGB_TONEMAPPED, imageBufferFloat)
# Here we write the pixel values to the RenderResult
result = self.begin_result(0, 0, self.filmWidth, self.filmHeight)
layer = result.layers[0]
layer.rect = pyluxcore.ConvertFilmChannelOutput_3xFloat_To_3xFloatList(
self.filmWidth, self.filmHeight, imageBufferFloat)
self.end_result(result)
if self.test_break():
# Time to stop the rendering
break
session.Stop()
print("Done.")
def render_image(self):
self.ui.renderView.clear()
self.scaleFactor = 1.0
if not self.ui.fitToWindowAct.isChecked():
self.ui.renderView.adjustSize()
self.update()
try:
self.halt = self.configProps.Get("batch.halttime").GetInt()
print(self.halt)
except:
print("no halttime set")
try:
self.shalt = self.configProps.Get("batch.haltspp").GetInt()
print(self.shalt)
except:
print("no samples set")
self.config = pyluxcore.RenderConfig(self.configProps, self.scene)
self.session = pyluxcore.RenderSession(self.config)
self.session.Start()
self.timer.start(500, self)
self.ui.renBtn.setEnabled(False)
self.ui.stopBtn.setEnabled(True)
self.ui.pauBtn.setEnabled(True)
def SimpleRender():
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# Change the render engine
props.Set(pyluxcore.Property("renderengine.type", ["PATHOCL"]))
props.Set(pyluxcore.Property("opencl.devices.select", ["01000"]))
props.Set(pyluxcore.Property("film.hw.enable", ["0"]))
props.Set(pyluxcore.Property("opencl.native.threads.count", [0]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
while True:
time.sleep(1)
elapsedTime = time.time() - startTime
if elapsedTime > 1.0:
# Time to stop the rendering
break
session.Stop()
def ExtractConfiguration():
print(
"Extracting Film configuration example (requires scenes directory)...")
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr-comp.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
# Extract the RenderConfig properties (redundant here)
props = session.GetRenderConfig().GetProperties()
ids = set()
for i in props.GetAllUniqueSubNames("film.outputs"):
if props.Get(i + ".type").GetString() == "MATERIAL_ID_MASK":
ids.add(props.Get(i + ".id").GetInt())
for i in ids:
print("MATERIAL_ID_MASK ID => %d" % i)
print("Done.")
def SimpleRender():
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
#props.Set(pyluxcore.Property("opencl.devices.select", ["0100"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
while True:
time.sleep(1)
elapsedTime = time.time() - startTime
if elapsedTime > 1.0:
# Time to stop the rendering
break
session.Stop()
# Save the rendered image
session.GetFilm().Save()
def test_Film_ConvTest(self):
# Load the configuration from file
props = pyluxcore.Properties("resources/scenes/simple/simple.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
props.Set(pyluxcore.Property("sampler.type", ["RANDOM"]))
props.Set(GetDefaultEngineProperties("PATHCPU"))
# Replace halt condition
props.Delete("batch.haltdebug")
# Run at full speed
props.Delete("native.threads.count")
props.Set(pyluxcore.Property("batch.haltthreshold", 0.075))
props.Set(pyluxcore.Property("batch.haltthreshold.step", 16))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
while True:
time.sleep(0.5)
# Update statistics (and run the convergence test)
session.UpdateStats()
if session.HasDone():
# Time to stop the rendering
break
session.Stop()
image = GetImagePipelineImage(session.GetFilm())
CheckResult(self, image, "Film_ConvTest", False)
def TestGeneratedScene(cls, params):
engineType = params[0]
samplerType = params[1]
renderConfigAdditionalProps = params[2]
isDeterministic = params[3]
# Create the rendering configuration
cfgProps = pyluxcore.Properties()
cfgProps.SetFromString("""
film.width = 512
film.height = 384
""")
# Set the rendering engine
cfgProps.Set(pyluxcore.Property("renderengine.type", engineType))
# Set the sampler
cfgProps.Set(pyluxcore.Property("sampler.type", samplerType))
cfgProps.Set(renderConfigAdditionalProps)
cfgProps.Set(LuxCoreTest.customConfigProps)
# Create the scene properties
scnProps = pyluxcore.Properties()
# Set the camera position
scnProps.SetFromString("""
scene.camera.lookat.orig = 0.0 5.0 2.0
scene.camera.lookat.target = 0.0 0.0 0.0
""")
# Define a white matte material
scnProps.SetFromString("""
scene.materials.whitematte.type = matte
scene.materials.whitematte.kd = 0.75 0.75 0.75
""")
# Add a plane
scnProps.Set(BuildPlane("plane1", "whitematte"))
# Add a distant light source
scnProps.SetFromString("""
scene.lights.distl.type = sharpdistant
scene.lights.distl.color = 1.0 1.0 1.0
scene.lights.distl.gain = 2.0 2.0 2.0
scene.lights.distl.direction = 1.0 1.0 -1.0
""")
# Create the scene
scene = pyluxcore.Scene()
scene.Parse(scnProps)
# Create the render config
config = pyluxcore.RenderConfig(cfgProps, scene)
# Run the rendering
StandardImageTest(
cls, "GeneratedScene_" + engineType + ("" if not samplerType else
("_" + samplerType)), config,
isDeterministic)
def load_stuff(self):
self.session = None
self.config = None
self.scene = None
self.ui.renBtn.setEnabled(True)
self.ui.stopBtn.setEnabled(False)
self.ui.pauBtn.setEnabled(False)
self.ui.renderView.clear()
cmdLineProp = pyluxcore.Properties()
self.configProps = pyluxcore.Properties()
self.sceneProps = pyluxcore.Properties()
print(self.ext)
print(self.cfgFileName)
if (self.ext == "lxs"):
os.chdir(self.lastpath)
pyluxcore.ParseLXS(self.cfgFileName, self.configProps,
self.sceneProps)
self.configProps.Set(cmdLineProp)
self.scene = pyluxcore.Scene(
self.configProps.Get("images.scale", [1.0]).GetFloat())
self.scene.Parse(self.sceneProps)
self.config = pyluxcore.RenderConfig(self.configProps, self.scene)
self.setup()
return
elif (self.ext == "cfg"):
os.chdir(self.lastpath)
print(self.cfgFileName)
self.configProps = pyluxcore.Properties(self.cfgFileName)
self.scene = pyluxcore.Scene(
self.configProps.Get("scene.file").GetString())
self.sceneProps = self.scene.ToProperties()
self.cameraPos = self.sceneProps.Get(
"scene.camera.lookat.orig").GetFloats()
self.config = pyluxcore.RenderConfig(self.configProps, self.scene)
self.setup()
elif (self.ext == "bcf"):
os.chdir(self.lastpath)
self.config = pyluxcore.RenderConfig(self.cfgFileName)
self.configProps.Parse(cmdLineProp)
self.setup()
def SaveFilm():
print("Film save example (requires scenes directory)...")
# Load the configuration from file
props = pyluxcore.Properties("scenes/simple/simple.cfg")
#props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# To test large films
#props.Set(pyluxcore.Property("film.width", 2048))
#props.Set(pyluxcore.Property("film.height", 2048))
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
while True:
time.sleep(.5)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats()
print(
"[Elapsed time: %3d/5sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]"
% (stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() /
1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
if elapsedTime > 5.0:
# Time to stop the rendering
break
session.Stop()
# Save the rendered image
t1 = Clock()
session.GetFilm().SaveFilm("simple.flm")
t2 = Clock()
print("Film save time: %s secs" % (t2 - t1))
print("Done.")
def renderEnginePathCPU(self):
# Stop the rendering
self.session.Stop()
self.session = None
# Change the render engine to PATHCPU
props = self.config.GetProperties()
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
# Create the new RenderConfig
self.config = pyluxcore.RenderConfig(props, self.scene)
# Re-start the rendering
self.session = pyluxcore.RenderSession(self.config)
self.session.Start()
print("PathCPU selected")
def renderEnginePathOCL(self, index):
# Stop the rendering
self.session.Stop()
self.session = None
# Change the render engine to PATHCPU
props = self.config.GetProperties()
selectString = list("0" * len(self.deviceList))
selectString[index] = "1"
props.Set(pyluxcore.Property("renderengine.type", ["PATHOCL"])). \
Set(pyluxcore.Property("opencl.devices.select", ["".join(selectString)]))
# Create the new RenderConfig
self.config = pyluxcore.RenderConfig(props, self.scene)
# Re-start the rendering
self.session = pyluxcore.RenderSession(self.config)
self.session.Start()
print("PathOCL selected: %s" % self.deviceList[index][0])
def CreateConfig(self, type):
# Load the configuration from file
props = pyluxcore.Properties("resources/scenes/simple/simple.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
props.Set(pyluxcore.Property("sampler.type", ["RANDOM"]))
props.Set(GetDefaultEngineProperties("PATHCPU"))
config = pyluxcore.RenderConfig(props)
scene = config.GetScene()
# Delete the red and green boxes
scene.DeleteObject("box1")
scene.DeleteObject("box2")
# Create the base object
props = pyluxcore.Properties()
if (type == "Normal"):
props.SetFromString("""
scene.objects.box1.ply = resources/scenes/simple/simple-mat-cube1.ply
scene.objects.box1.material = redmatte
""")
elif (type == "Instance"):
props.SetFromString("""
scene.objects.box1.ply = resources/scenes/simple/simple-mat-cube1.ply
scene.objects.box1.material = redmatte
scene.objects.box1.transformation = 1.0 0.0 0.0 0.0 0.0 1.0 0.0 0.0 0.0 0.0 1.0 0.0 -0.5 0.0 0.0 1.0
""")
elif (type == "Motion"):
props.SetFromString("""
scene.objects.box1.ply = resources/scenes/simple/simple-mat-cube1.ply
scene.objects.box1.material = redmatte
scene.objects.box1.motion.0.time = 0.0
scene.objects.box1.motion.0.transformation = 1.0 0.0 0.0 0.0 0.0 1.0 0.0 0.0 0.0 0.0 1.0 0.0 -0.25 0.0 0.0 1.0
scene.objects.box1.motion.1.time = 1.0
scene.objects.box1.motion.1.transformation = 1.0 0.0 0.0 0.0 0.0 1.0 0.0 0.0 0.0 0.0 1.0 0.0 0.25 0.0 0.0 1.0
""")
else:
self.assertFalse()
scene.Parse(props)
return config
def __init__(self, cfgFileName):
super(RenderView, self).__init__()
self.dofEnabled = True
self.luxBallShapeIsCube = False
self.selectedFilmChannel = pyluxcore.FilmOutputType.RGB_TONEMAPPED
self.createActions()
self.createMenus()
# Load the configuration from file
props = pyluxcore.Properties(cfgFileName)
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
# Read the configuration and start the rendering
self.scene = pyluxcore.Scene(props.Get("scene.file").GetString(),
props.Get("images.scale", [1.0]).GetFloat())
sceneProps = self.scene.GetProperties()
# Save Camera position
self.cameraPos = sceneProps.Get("scene.camera.lookat.orig").GetFloats()
self.luxBallPos = [0.0, 0.0, 0.0]
# Create the rendering configuration
self.config = pyluxcore.RenderConfig(props, self.scene)
self.filmWidth, self.filmHeight = self.config.GetFilmSize()[:2]
# Allocate the image for the rendering
self.allocateImageBuffers()
self.setGeometry(0, 0, self.filmWidth, self.filmHeight)
self.setWindowTitle('LuxCore RenderView')
self.center()
# Create the rendering session
self.session = pyluxcore.RenderSession(self.config)
# Start the rendering
self.session.Start()
self.timer = QBasicTimer()
self.timer.start(500, self)
def TestSceneEditRendering(cls, params):
engineType = params[0]
samplerType = params[1]
# Create the rendering configuration
props = pyluxcore.Properties(LuxCoreTest.customConfigProps)
props.SetFromFile("resources/scenes/simple/simple.cfg")
# Set the rendering engine
props.Set(GetEngineProperties(engineType))
# Set the sampler (if required)
if samplerType:
props.Set(pyluxcore.Property("sampler.type", samplerType))
config = pyluxcore.RenderConfig(props)
# Run the rendering
StandardAnimTest(
cls, "SceneEditRendering_" + engineType + ("" if not samplerType else
("_" + samplerType)),
config, 5)
def RunRemoveUnusedTest(self, name, removeImageMaps, removeUnusedTexs,
removeUnusedMats, removeUnusedMeshes, editProps):
# Load the configuration from file
props = pyluxcore.Properties(
"resources/scenes/simple/texture-imagemap.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
props.Set(pyluxcore.Property("sampler.type", ["RANDOM"]))
props.Set(GetDefaultEngineProperties("PATHCPU"))
# Delete halt condition
props.Delete("batch.haltthreshold")
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
time.sleep(2.0)
session.BeginSceneEdit()
scene = config.GetScene()
scene.Parse(editProps)
if (removeImageMaps):
scene.RemoveUnusedImageMaps()
if (removeUnusedTexs):
scene.RemoveUnusedTextures()
if (removeUnusedMats):
scene.RemoveUnusedMaterials()
if (removeUnusedMeshes):
scene.RemoveUnusedMeshes()
session.EndSceneEdit()
time.sleep(5.0)
session.Stop()
image = GetImagePipelineImage(session.GetFilm())
CheckResult(self, image, name, False)
def view_update(self, context):
print("LuxCore view_update call")
if (self.session != None):
self.session.Stop()
if (self.filmWidth != context.region.width) or (self.filmHeight !=
context.region.height):
self.filmWidth = context.region.width
self.filmHeight = context.region.height
self.imageBufferFloat = array(
'f', [0.0] * (self.filmWidth * self.filmHeight * 3))
print("Film size: %dx%d" % (self.filmWidth, self.filmHeight))
########################################################################
# Setup the rendering
########################################################################
scene = self.ConvertBlenderScene(bpy.context.scene)
config = pyluxcore.RenderConfig(self.CreateRenderConfigProps(), scene)
self.session = pyluxcore.RenderSession(config)
self.session.Start()
def test_Film_SaveLoad(self):
# Load the configuration from file
props = pyluxcore.Properties("resources/scenes/simple/simple.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
props.Set(pyluxcore.Property("sampler.type", ["RANDOM"]))
props.Set(GetDefaultEngineProperties("PATHCPU"))
config = pyluxcore.RenderConfig(props)
session = DoRenderSession(config)
# Get the imagepipeline result
filmA = session.GetFilm()
imageA = GetImagePipelineImage(filmA)
# Save the film
filmA.SaveFilm("simple.flm")
# Load the film
filmB = pyluxcore.Film("simple.flm")
self.assertEqual(filmB.GetWidth(), filmA.GetWidth())
self.assertEqual(filmB.GetHeight(), filmA.GetHeight())
# Get the imagepipeline result
imageB = GetImagePipelineImage(filmB)
# To debug
#imageA.save("imageA.png")
#imageB.save("imageB.png")
# Check if there is a difference
(sameImage, diffCount, diffImage) = CompareImage(imageA, imageB)
self.assertTrue(sameImage)
os.unlink("simple.flm")
def __HandleConnection(self, clientSocket, addr):
id = str(uuid.uuid4())
renderConfigFile = "renderfarmnode-" + id + ".bcf"
filmFile = "renderfarmnode-" + id + ".flm"
try:
logger.info("Received connection from: " + str(addr))
#-----------------------------------------------------------
# Check pyluxcore version
#-----------------------------------------------------------
remoteVersion = socketutils.RecvLine(clientSocket)
logger.info("Remote pyluxcore version: " + remoteVersion)
logger.info("Local pyluxcore version: " + pyluxcore.Version())
if (remoteVersion != pyluxcore.Version()):
logger.info("No matching pyluxcore versions !")
socketutils.SendLine(
clientSocket,
"ERROR: wrong pyluxcore version" + pyluxcore.Version())
return
socketutils.SendLine(clientSocket, "OK")
#-----------------------------------------------------------
# Receive the RenderConfig serialized file
#-----------------------------------------------------------
logger.info("Receiving RenderConfig serialized file: " +
renderConfigFile)
socketutils.RecvFile(clientSocket, renderConfigFile)
logger.info("Receiving RenderConfig serialized MD5: " +
md5utils.md5sum(renderConfigFile))
#-----------------------------------------------------------
# Receive the seed
#-----------------------------------------------------------
seed = socketutils.RecvLine(clientSocket)
logger.info("Received seed: " + seed)
seed = int(seed)
#-----------------------------------------------------------
# Read the RenderConfig serialized file
#-----------------------------------------------------------
logger.info("Reading RenderConfig serialized file: " +
renderConfigFile)
config = pyluxcore.RenderConfig(renderConfigFile)
# Sanitize the RenderConfig
self.__SanitizeRenderConfig(config)
config.Parse(self.customProperties)
#-----------------------------------------------------------
# Start the rendering
#-----------------------------------------------------------
session = pyluxcore.RenderSession(config)
session.Start()
try:
socketutils.SendLine(clientSocket, "RENDERING_STARTED")
statsLine = "Not yet avilable"
while not self.threadStop:
result = socketutils.RecvLineWithTimeOut(clientSocket, 0.2)
# Check if there was the timeout
if result == None:
continue
logger.info("Received command: " + result)
#-------------------------------------------------------
# Update statistics
#-------------------------------------------------------
session.UpdateStats()
stats = session.GetStats()
elapsedTime = stats.Get(
"stats.renderengine.time").GetFloat()
currentPass = stats.Get(
"stats.renderengine.pass").GetInt()
statsLine = "[Elapsed time: %3dsec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
elapsedTime, currentPass,
stats.Get("stats.renderengine.total.samplesec"
).GetFloat() / 1000000.0,
stats.Get("stats.dataset.trianglecount").GetFloat() /
1000.0)
#-------------------------------------------------------
# Execute the command
#-------------------------------------------------------
if (result.startswith("ERROR")):
logger.info(result)
return
elif (result == "GET_STATS"):
socketutils.SendLine(clientSocket, statsLine)
elif (result == "GET_FILM"):
# Save the film to a file
session.GetFilm().SaveFilm(filmFile)
# Transmit the film file
socketutils.SendFile(clientSocket, filmFile)
elif (result == "DONE"):
socketutils.SendOk(clientSocket)
break
else:
raise SyntaxError("Unknow command: " + result)
#-------------------------------------------------------
# Print some information about the rendering progress
#-------------------------------------------------------
logger.info(statsLine)
finally:
session.Stop()
except KeyboardInterrupt:
raise
except Exception as e:
logger.exception(e)
finally:
try:
os.remove(filmFile)
except OSError:
pass
try:
os.remove(filmFile + ".bak")
except OSError:
pass
try:
os.remove(renderConfigFile)
except OSError:
pass
try:
clientSocket.shutdown(socket.SHUT_RDWR)
except:
pass
try:
clientSocket.close()
except:
pass
logger.info("Connection done: " + str(addr))
def SaveResumeRenderingS():
print("Save and Resume example (requires scenes directory)...")
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
for i in range(0, 3):
time.sleep(1)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats();
print("[Elapsed time: %3d/3sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() / 1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
session.Pause()
session.GetFilm().SaveOutput("test-save.png", pyluxcore.FilmOutputType.RGB_IMAGEPIPELINE, pyluxcore.Properties())
# Save the session resume file
session.SaveResumeFile("test.rsm")
# Save the rendered image
session.GetFilm().Save()
# Stop the rendering
session.Stop()
# Resume rendering
print("Resume rendering")
(config, startState, startFilm) = pyluxcore.RenderConfig.LoadResumeFile("test.rsm")
session = pyluxcore.RenderSession(config, startState, startFilm)
session.Start()
startTime = time.time()
for i in range(0, 3):
time.sleep(1)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats();
print("[Elapsed time: %3d/3sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() / 1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
session.GetFilm().SaveOutput("test-resume.png", pyluxcore.FilmOutputType.RGB_IMAGEPIPELINE, pyluxcore.Properties())
session.Stop()
print("Done.")
def ImagePipelineEdit():
print("Image pipeline editing examples (requires scenes directory)...")
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
imageSaved = False
while True:
time.sleep(1)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats();
print("[Elapsed time: %3d/10sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() / 1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
if elapsedTime > 5.0 and not imageSaved:
session.GetFilm().Save()
os.rename("normal.png", "normal-edit1.png")
# Define the new image pipeline
props = pyluxcore.Properties()
props.SetFromString("""
film.imagepipeline.0.type = TONEMAP_REINHARD02
film.imagepipeline.1.type = CAMERA_RESPONSE_FUNC
film.imagepipeline.1.name = Ektachrome_320TCD
film.imagepipeline.2.type = GAMMA_CORRECTION
film.imagepipeline.2.value = 2.2
""")
session.Parse(props)
# Change radiance group scale
# props = pyluxcore.Properties()
# props.SetFromString("""
# film.radiancescales.0.rgbscale = 1.0 0.0 0.0
# """)
# session.Parse(props)
imageSaved = True
if elapsedTime > 10.0:
# Time to stop the rendering
break
session.Stop()
# Save the rendered image
session.GetFilm().Save()
os.rename("normal.png", "normal-edit2.png")
print("Done.")
def StrandsRender():
print("Strands example...")
# Create the rendering configuration
cfgProps = pyluxcore.Properties()
cfgProps.SetFromString("""
film.width = 640
film.height = 480
""")
# Set the rendering engine
cfgProps.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
# Create the scene properties
scnProps = pyluxcore.Properties()
# Set the camera position
scnProps.SetFromString("""
scene.camera.lookat.orig = 0.0 5.0 2.0
scene.camera.lookat.target = 0.0 0.0 0.0
""")
# Define a white matte material
scnProps.SetFromString("""
scene.materials.whitematte.type = matte
scene.materials.whitematte.kd = 0.75 0.75 0.75
""")
# Add a plane
scnProps.Set(BuildPlane("plane1", "whitematte"))
# Add a distant light source
scnProps.SetFromString("""
scene.lights.distl.type = sharpdistant
scene.lights.distl.color = 1.0 1.0 1.0
scene.lights.distl.gain = 2.0 2.0 2.0
scene.lights.distl.direction = 1.0 1.0 -1.0
""")
# Create the scene
#resizePolicyProps = pyluxcore.Properties()
#resizePolicyProps.SetFromString("""
# scene.images.resizepolicy.type = "MIPMAPMEM"
# scene.images.resizepolicy.scale = 1.0
# scene.images.resizepolicy.minsize = 64
# """)
#scene = pyluxcore.Scene(scnProps, resizePolicyProps)
scene = pyluxcore.Scene()
scene.Parse(scnProps)
# Add strands
points = []
segments = []
strandsCount = 30
for i in range(strandsCount):
x = random.random() * 2.0 - 1.0
y = random.random() * 2.0 - 1.0
points.append((x , y, 0.0))
points.append((x , y, 1.0))
segments.append(1)
scene.DefineStrands("strands_shape", strandsCount, 2 * strandsCount, points, segments,
0.025, 0.0, (1.0, 1.0, 1.0), None, "ribbon",
0, 0, 0, False, False, True)
strandsProps = pyluxcore.Properties()
strandsProps.SetFromString("""
scene.objects.strands_obj.material = whitematte
scene.objects.strands_obj.shape = strands_shape
""")
scene.Parse(strandsProps)
# Save the strand mesh (just for testing)
scene.SaveMesh("strands_shape", "strands_shape.ply")
# Create the render config
config = pyluxcore.RenderConfig(cfgProps, scene)
session = pyluxcore.RenderSession(config)
session.Start()
startTime = time.time()
while True:
time.sleep(1)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats();
print("[Elapsed time: %3d/5sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() / 1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
if elapsedTime > 5.0:
# Time to stop the rendering
break
session.Stop()
# Save the rendered image
session.GetFilm().Save()
print("Done.")
def GetOutputTest():
print("Film getOutput() example (requires scenes directory)...")
# Load the configuration from file
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
# Change the render engine to PATHCPU
props.Set(pyluxcore.Property("renderengine.type", ["PATHCPU"]))
config = pyluxcore.RenderConfig(props)
session = pyluxcore.RenderSession(config)
# NOTICE THE DIFFERENT BEHAVIOR REQUIRED BY PYTHON 3.3, 2.7 and 2.6
filmWidth, filmHeight = config.GetFilmSize()[:2]
if sys.version_info < (2,7,0):
imageBufferFloat = bytearray(filmWidth * filmHeight * 3 * 4)
imageBufferUChar = bytearray(filmWidth * filmHeight * 4)
elif sys.version_info < (3,0,0):
imageBufferFloat = buffer(array('f', [0.0] * (filmWidth * filmHeight * 3)))
imageBufferUChar = buffer(array('B', [0] * (filmWidth * filmHeight * 4)))
else:
imageBufferFloat = array('f', [0.0] * (filmWidth * filmHeight * 3))
imageBufferUChar = array('B', [0] * (filmWidth * filmHeight * 4))
session.Start()
startTime = time.time()
imageIndex = 0
while True:
time.sleep(1)
elapsedTime = time.time() - startTime
# Print some information about the rendering progress
# Update statistics
session.UpdateStats()
stats = session.GetStats();
print("[Elapsed time: %3d/5sec][Samples %4d][Avg. samples/sec % 3.2fM on %.1fK tris]" % (
stats.Get("stats.renderengine.time").GetFloat(),
stats.Get("stats.renderengine.pass").GetInt(),
(stats.Get("stats.renderengine.total.samplesec").GetFloat() / 1000000.0),
(stats.Get("stats.dataset.trianglecount").GetFloat() / 1000.0)))
# This is mostly for testing the PyLuxCore functionality, save an image every second
# Update the image
session.GetFilm().GetOutputFloat(pyluxcore.FilmOutputType.RGB_IMAGEPIPELINE, imageBufferFloat)
pyluxcore.ConvertFilmChannelOutput_3xFloat_To_4xUChar(filmWidth, filmHeight,
imageBufferFloat, imageBufferUChar, False)
# Save the imageBufferUChar buffer to a PPM file
imageFileName = "image" + str(imageIndex) + ".ppm"
print("Saving image file: " + imageFileName)
f = open(imageFileName, "w")
f.write("P3\n")
f.write(str(filmWidth) + " " + str(filmHeight) + "\n")
f.write("255\n")
for i in range(0, len(imageBufferUChar), 4):
f.write(str(imageBufferUChar[i + 2]) + " " + str(imageBufferUChar[i + 1]) + " " + str(imageBufferUChar[i]) + "\n")
f.close()
imageIndex += 1
if elapsedTime > 5.0:
# Time to stop the rendering
break
session.Stop()
print("Done.")
def LuxCoreConsole(argv):
parser = argparse.ArgumentParser(description="PyLuxCoreConsole")
parser.add_argument("fileToRender",
help=".cfg, .lxs, .bcf or .rsm file to render")
parser.add_argument("-f",
"--scene",
metavar="FILE_NAME",
nargs=1,
help="scene file name")
parser.add_argument("-w",
"--film-width",
metavar="WIDTH",
nargs=1,
type=int,
help="film width")
parser.add_argument("-e",
"--film-height",
metavar="HEIGHT",
nargs=1,
type=int,
help="film height")
parser.add_argument("-D",
"--define",
metavar=("PROP_NAME", "VALUE"),
nargs=2,
action="append",
help="assign a value to a property")
parser.add_argument("-d",
"--current-dir",
metavar="DIR_NAME",
nargs=1,
help="current directory path")
parser.add_argument(
"-c",
"--remove-unused",
action="store_true",
help="remove all unused meshes, materials, textures and image maps")
parser.add_argument("-t",
"--camera-shutter",
metavar="CAMERA_SHUTTER",
nargs=2,
type=float,
help="camera shutter open/close")
# Parse command line arguments
args = parser.parse_args(argv)
cmdLineProp = pyluxcore.Properties()
if (args.scene):
cmdLineProp.Set(pyluxcore.Property("scene.file", args.scene))
if (args.film_width):
cmdLineProp.Set(pyluxcore.Property("film.width", args.film_width))
if (args.film_height):
cmdLineProp.Set(pyluxcore.Property("film.height", args.film_height))
if (args.define):
for (name, value) in args.define:
cmdLineProp.Set(pyluxcore.Property(name, value))
if (args.current_dir):
os.chdir(args.current_dir[0])
removeUnused = args.remove_unused
if (not args.fileToRender):
raise TypeError("File to render must be specified")
# Load the file to render
config = None
startState = None
startFilm = None
configFileNameExt = os.path.splitext(args.fileToRender)[1]
if (configFileNameExt == ".lxs"):
# It is a LuxRender SDL file
logger.info("Parsing LuxRender SDL file...")
# Parse the LXS file
configProps = pyluxcore.Properties()
sceneProps = pyluxcore.Properties()
pyluxcore.ParseLXS(args.fileToRender, configProps, sceneProps)
configProps.Set(cmdLineProp)
scene = pyluxcore.Scene(
configProps.Get("images.scale", [1.0]).GetFloat())
scene.Parse(sceneProps)
config = pyluxcore.RenderConfig(configProps, scene)
elif (configFileNameExt == ".cfg"):
# It is a LuxCore SDL file
configProps = pyluxcore.Properties(args.fileToRender)
configProps.Set(cmdLineProp)
config = pyluxcore.RenderConfig(configProps)
elif (configFileNameExt == ".bcf"):
# It is a LuxCore RenderConfig binary archive
config = pyluxcore.RenderConfig(args.fileToRender)
config.Parse(cmdLineProp)
elif (configFileNameExt == ".rsm"):
# It is a rendering resume file
(config, startState,
startFilm) = pyluxcore.RenderConfig.LoadResumeFile(args.fileToRender)
config.Parse(cmdLineProp)
else:
raise TypeError("Unknown file extension: " + args.fileToRender)
if (removeUnused):
config.GetScene().RemoveUnusedMeshes()
config.GetScene().RemoveUnusedImageMaps()
config.GetScene().RemoveUnusedMaterials()
config.GetScene().RemoveUnusedTextures()
# Overwrite camera shutter open/close
if (args.camera_shutter):
cameraProps = config.GetScene().ToProperties().GetAllProperties(
"scene.camera")
cameraProps.Set(
pyluxcore.Property("scene.camera.shutteropen",
[args.camera_shutter[0]]))
cameraProps.Set(
pyluxcore.Property("scene.camera.shutterclose",
[args.camera_shutter[1]]))
config.GetScene().Parse(cameraProps)
# Force the film update at 2.5secs (mostly used by PathOCL)
# Skip in case of a FILESAVER
isFileSaver = (
config.GetProperty("renderengine.type").GetString() == "FILESAVER")
if (not isFileSaver):
config.Parse(pyluxcore.Properties().Set(
pyluxcore.Property("screen.refresh.interval", 2500)))
session = BatchRendering(config, startState, startFilm)
if (not isFileSaver):
# Save the rendered image
session.GetFilm().Save()
logger.info("Done.")
def build_session(scene, output_name):
props = pyluxcore.Properties()
props.SetFromString("""
opencl.cpu.use = 0
# Use all GPU devices we can find
opencl.gpu.use = 1
# You can use this setting to specify exactly which OpenCL devices to use
#opencl.devices.select = "1"
renderengine.type = "PATHCPU"
sampler.type = "SOBOL"
#renderengine.type = "TILEPATHOCL"
#sampler.type = "TILEPATHSAMPLER"
#pathocl.pixelatomics.enable = 1
renderengine.seed = 1
path.pathdepth.total = 17
path.pathdepth.diffuse = 10
path.pathdepth.glossy = 17
path.pathdepth.specular = 16
path.photongi.sampler.type = METROPOLIS
path.photongi.photon.maxcount = 10000000
path.photongi.photon.maxdepth = 16
path.photongi.photon.time.start = 0.0
path.photongi.photon.time.end = 1.0
#path.photongi.indirect.enabled = 1
#path.photongi.indirect.maxsize = 100000
#path.photongi.indirect.haltthreshold = 0.05
#path.photongi.indirect.lookup.radius = 0.15
#path.photongi.indirect.glossinessusagethreshold = 0.0
#path.photongi.indirect.usagethresholdscale = 0.0
#path.photongi.indirect.filter.radiusscale = 4.0
#path.photongi.caustic.enabled = 0
#path.photongi.caustic.maxsize = 10000
#path.photongi.caustic.lookup.radius = 0.15
#path.photongi.debug.type = showindirect
#path.photongi.debug.type = showcaustic
#path.photongi.debug.type = showindirectpathmix
path.photongi.persistent.file = cornell.pgi
film.width = 768
film.height = 768
film.imagepipelines.0.0.type = "NOP"
film.imagepipelines.0.1.type = "TONEMAP_LUXLINEAR"
film.imagepipelines.0.1.fstop = 4
film.imagepipelines.0.1.exposure = 100
film.imagepipelines.0.1.sensitivity = 150
film.imagepipelines.0.2.type = "GAMMA_CORRECTION"
film.imagepipelines.0.2.value = 2.2000000000000002
film.imagepipelines.1.0.type = INTEL_OIDN
film.imagepipelines.1.1.type = "TONEMAP_LUXLINEAR"
film.imagepipelines.1.1.fstop = 4
film.imagepipelines.1.1.exposure = 100
film.imagepipelines.1.1.sensitivity = 150
film.imagepipelines.1.2.type = "GAMMA_CORRECTION"
film.imagepipelines.1.2.value = 2.2000000000000002
#film.imagepipelines.0.1.type = GAMMA_CORRECTION
#film.imagepipelines.0.1.value = 7.0
#film.imagepipelines.0.0.type = BCD_DENOISER
#film.imagepipelines.0.1.type = GAMMA_CORRECTION
#film.imagepipelines.0.1.value = 2.2
film.filter.type = "BLACKMANHARRIS"
film.filter.width = 1.5
film.outputs.0.type = "RGB_IMAGEPIPELINE"
film.outputs.0.index = 0
film.outputs.0.filename = """ + output_name + "_noisy.png" + """
film.outputs.1.type = RGB_IMAGEPIPELINE
film.outputs.1.index = 1
film.outputs.1.filename = """ + output_name + ".png" + """
film.outputs.2.type = ALBEDO
film.outputs.2.filename = """ + output_name + "_" + "ALBEDO.png" + """
film.outputs.3.type = AVG_SHADING_NORMAL
film.outputs.3.filename = """ + output_name + "_" + "AVG_SHADING_NORMAL.png" + """
scene.file = "freefall.scn"
""")
renderconfig = pyluxcore.RenderConfig(props, scene)
session = pyluxcore.RenderSession(renderconfig)
return session
def RenderConfigOps():
props = pyluxcore.Properties("scenes/luxball/luxball-hdr.cfg")
config = pyluxcore.RenderConfig(props)
