def construct(s,
PacketType,
QueueType=NormalQueueRTL,
vc=2,
credit_line=2):
# Local paramters
s.vc = vc
# Interface
s.recv = CreditRecvIfcRTL(PacketType, vc=vc)
s.give = [GiveIfcRTL(PacketType) for _ in range(vc)]
s.buffers = [
QueueType(PacketType, num_entries=credit_line) for _ in range(vc)
]
for i in range(vc):
s.buffers[i].enq.msg //= s.recv.msg
s.buffers[i].deq //= s.give[i]
s.recv.yum[i] //= s.give[i].en
@update
def up_enq():
if s.recv.en:
for i in range(vc):
s.buffers[i].enq.en @= s.recv.msg.vc_id == i
else:
for i in range(vc):
s.buffers[i].enq.en @= 0
def construct(s, Type, num_inports=1):
assert num_inports == 1, 'Null switch unit can only be used for single-input router!'
# Interface
s.get = [GetIfcRTL(Type) for _ in range(num_inports)]
s.hold = [InPort() for _ in range(num_inports)]
s.give = GiveIfcRTL(Type)
connect(s.give, s.get[0])
def construct(s, PacketType, QueueType=NormalQueueRTL):
# Interface
s.recv = RecvIfcRTL(PacketType)
s.give = GiveIfcRTL(PacketType)
# Component
s.queue = QueueType(PacketType)
s.queue.enq //= s.recv
s.queue.deq //= s.give
def construct(s, PacketType, PositionType, num_outports, n_fly=3):
# Constants
s.num_outports = num_outports
k_ary = num_outports
OutType = mk_bits(clog2(s.num_outports))
rows = k_ary**(n_fly - 1)
DstType = mk_bits(clog2(k_ary) * n_fly)
RowWidth = clog2(k_ary)
END = n_fly * RowWidth
BEGIN = END - RowWidth
# Interface
s.get = GetIfcRTL(PacketType)
s.give = [GiveIfcRTL(PacketType) for _ in range(s.num_outports)]
s.pos = InPort(PositionType)
# Componets
s.out_dir = Wire(OutType)
s.give_rdy = [Wire() for _ in range(s.num_outports)]
s.give_ens = Wire(mk_bits(s.num_outports))
# Connections
for i in range(s.num_outports):
s.give_ens[i] //= s.give[i].en
s.give_rdy[i] //= s.give[i].rdy
# Routing logic
@update
def up_ru_routing():
for i in range(s.num_outports):
s.give_rdy[i] @= 0
if s.get.rdy:
s.out_dir @= s.get.ret.dst[BEGIN:END]
s.give_rdy[s.out_dir] @= 1
@update
def up_ru_get_en():
s.get.en @= s.give_ens > 0
for i in range(s.num_outports):
s.give[i].ret @= s.get.ret
if s.get.rdy:
s.give[s.out_dir].ret.dst @= s.get.ret.dst << RowWidth
def construct( s, PacketType, PositionType, num_outports = 8 ):
# Constants
s.num_outports = num_outports
TType = mk_bits( clog2(num_outports) )
# Interface
s.get = GetIfcRTL( PacketType )
s.give = [ GiveIfcRTL (PacketType) for _ in range ( s.num_outports ) ]
s.pos = InPort( PositionType )
# Componets
s.give_ens = Wire( mk_bits( s.num_outports ) )
s.give_rdy = [ Wire() for _ in range( s.num_outports )]
# Connections
for i in range( s.num_outports ):
s.get.ret //= s.give[i].ret
s.give_ens[i] //= s.give[i].en
s.give_rdy[i] //= s.give[i].rdy
# Routing logic
@update
def up_ru_routing():
s.out_dir @= 0
for i in range( s.num_outports ):
s.give_rdy[i] @= Bits1(0)
if s.get.rdy:
if (s.pos.pos_x == s.get.ret.dst_x) & (s.pos.pos_y == s.get.ret.dst_y):
s.give_rdy[ Bits3( 4 ) + s.get.ret.dst_ter ] @= 1
elif s.get.ret.dst_x < s.pos.pos_x:
s.give_rdy[2] @= 1
elif s.get.ret.dst_x > s.pos.pos_x:
s.give_rdy[3] @= 1
elif s.get.ret.dst_y < s.pos.pos_y:
s.give_rdy[1] @= 1
else:
s.give_rdy[0] @= 1
@update
def up_ru_get_en():
s.get.en = s.give_ens > 0
def construct(s, Type, num_inports=5):
# Local parameters
s.num_inports = num_inports
s.Type = Type
s.sel_width = clog2(num_inports)
# Interface
s.get = [GetIfcRTL(s.Type) for _ in range(num_inports)]
s.hold = InPort(num_inports)
s.give = GiveIfcRTL(s.Type)
# Components
s.granted_get_rdy = Wire()
s.any_hold = Wire()
s.arbiter = GrantHoldArbiter(nreqs=num_inports)
s.arbiter.hold //= s.any_hold
s.arbiter.en //= lambda: ~s.any_hold & s.give.en
s.mux = Mux(s.Type, num_inports)
s.mux.out //= s.give.ret
s.encoder = Encoder(num_inports, s.sel_width)
s.encoder.in_ //= s.arbiter.grants
s.encoder.out //= s.mux.sel
# Combinational Logic
@update
def up_any_hold():
s.any_hold @= s.hold > 0
@update
def up_granted_get_rdy():
s.granted_get_rdy @= 0
for i in range(num_inports):
if s.arbiter.grants[i]:
s.granted_get_rdy @= s.get[i].rdy
for i in range(num_inports):
s.get[i].rdy //= s.arbiter.reqs[i]
s.get[i].ret //= s.mux.in_[i]
for i in range(num_inports):
s.get[i].en //= lambda: s.give.en & (s.mux.sel == i)
s.give.rdy //= s.granted_get_rdy
def construct(s, PacketType, num_inports=5):
# Local parameters
s.num_inports = num_inports
s.sel_width = clog2(num_inports)
s.set_ocp = 0
s.clear_ocp = 0
# Interface
s.get = [GetIfcRTL(PacketType) for _ in range(s.num_inports)]
s.give = GiveIfcRTL(PacketType)
s.out_ocp = OutPort()
# Components
s.get_en = [Wire() for _ in range(s.num_inports)]
s.get_rdy = [Wire() for _ in range(s.num_inports)]
s.arbiter = RoundRobinArbiterEn(num_inports)
s.arbiter.en //= 1
s.mux = Mux(PacketType, num_inports)
s.mux.out //= s.give.ret
s.encoder = Encoder(num_inports, s.sel_width)
s.encoder.in_ //= s.arbiter.grants
s.encoder.out //= s.mux.sel
# Connections
for i in range(num_inports):
s.get[i].rdy //= s.arbiter.reqs[i]
s.get[i].ret //= s.mux.in_[i]
s.get[i].en //= s.get_en[i]
s.get[i].rdy //= s.get_rdy[i]
@update
def up_give():
s.give.rdy @= s.arbiter.grants > 0
@update
def up_get_en():
for i in range(num_inports):
s.get_en[i] @= s.give.en & (s.mux.sel == i)
def construct(s, dtype):
s.drop = InPort()
s.in_ = GetIfcRTL(dtype)
s.out = GiveIfcRTL(dtype)
s.out.ret //= s.in_.ret
s.snoop_state = Wire()
#------------------------------------------------------------------
# state_transitions
#------------------------------------------------------------------
@s.update_ff
def state_transitions():
if s.reset:
s.snoop_state <<= SNOOP
elif s.snoop_state == SNOOP:
if s.drop & ~s.in_.rdy:
s.snoop_state <<= WAIT
elif s.snoop_state == WAIT:
if s.in_.rdy:
s.snoop_state <<= SNOOP
#------------------------------------------------------------------
# set_outputs
#------------------------------------------------------------------
@s.update
def set_outputs():
s.out.rdy = b1(0)
s.in_.en = b1(0)
if s.snoop_state == SNOOP:
s.out.rdy = s.in_.rdy & ~s.drop
s.in_.en = s.out.en
elif s.snoop_state == WAIT:
s.out.rdy = b1(0)
s.in_.en = s.in_.rdy
def construct(s, PacketType, PositionType, num_outports):
# Interface
s.get = GetIfcRTL(PacketType)
s.give = [GiveIfcRTL(PacketType) for _ in range(num_outports)]
s.pos = InPort(PositionType)
# Componets
s.out_dir = Wire(mk_bits(clog2(num_outports)))
s.give_ens = Wire(mk_bits(num_outports))
# Connections
for i in range(num_outports):
s.get.ret //= s.give[i].ret
s.give_ens[i] //= s.give[i].en
# Routing logic
@update
def up_ru_routing():
s.out_dir = Bits3(0)
for i in range(num_outports):
s.give[i].rdy = Bits1(0)
if s.get.rdy:
if s.pos.pos_x == s.get.ret.dst_x and s.pos.pos_y == s.get.ret.dst_y:
s.out_dir = SELF
elif s.get.ret.dst_x < s.pos.pos_x:
s.out_dir = WEST
elif s.get.ret.dst_x > s.pos.pos_x:
s.out_dir = EAST
elif s.get.ret.dst_y > s.pos.pos_y:
s.out_dir = NORTH
else:
s.out_dir = SOUTH
s.give[s.out_dir].rdy = Bits1(1)
@update
def up_ru_give_en():
s.get.en = s.give_ens > Bits5(0)
def construct( s, MsgType, PositionType, num_outports = 5 ):
# Interface
s.get = GetIfcRTL( MsgType )
s.give = [ GiveIfcRTL (MsgType) for _ in range ( num_outports ) ]
s.pos = InPort( PositionType )
# Componets
s.give_ens = Wire( mk_bits( num_outports ) )
# Connections
for i in range( num_outports ):
s.get.ret //= s.give[i].ret
s.give_ens[i] //= s.give[i].en
# Routing logic
@update
def up_ru_routing():
s.give[0].rdy @= 0
s.give[1].rdy @= 0
s.give[2].rdy @= 0
s.give[3].rdy @= 0
s.give[4].rdy @= 0
if s.get.rdy:
if (s.pos.pos_x == s.get.ret.dst_x) & (s.pos.pos_y == s.get.ret.dst_y):
s.give[4].rdy @= 1
elif s.get.ret.dst_y < s.pos.pos_y:
s.give[1].rdy @= 1
elif s.get.ret.dst_y > s.pos.pos_y:
s.give[0].rdy @= 1
elif s.get.ret.dst_x < s.pos.pos_x:
s.give[2].rdy @= 1
else:
s.give[3].rdy @= 1
@update
def up_ru_get_en():
s.get.en @= s.give_ens > 0
def construct(s, PacketType, num_outports):
# Local parameters
dir_nbits = 1 if num_outports == 1 else clog2(num_outports)
DirT = mk_bits(dir_nbits)
BitsN = mk_bits(num_outports)
# Interface
s.get = GetIfcRTL(PacketType)
s.give = [GiveIfcRTL(PacketType) for _ in range(num_outports)]
# Componets
s.out_dir = Wire(DirT)
s.give_ens = Wire(BitsN)
# Connections
for i in range(num_outports):
s.get.ret //= s.give[i].ret
s.give_ens[i] //= s.give[i].en
# Routing logic
@update
def up_ru_routing():
s.out_dir @= trunc(s.get.ret.dst, dir_nbits)
for i in range(num_outports):
s.give[i].rdy @= b1(0)
if s.get.rdy:
s.give[s.out_dir].rdy @= b1(1)
@update
def up_ru_give_en():
s.get.en @= s.give_ens > 0
def construct(s, PacketType, PositionType, num_routers=4):
# Constants
s.num_outports = 3
s.num_routers = num_routers
DistType = mk_bits(clog2(num_routers))
s.last_idx = DistType(num_routers - 1)
# Interface
s.get = GetIfcRTL(PacketType)
s.give = [GiveIfcRTL(PacketType) for _ in range(s.num_outports)]
s.pos = InPort(PositionType)
# Componets
s.out_dir = Wire(mk_bits(clog2(s.num_outports)))
s.give_ens = Wire(mk_bits(s.num_outports))
s.left_dist = Wire(DistType)
s.right_dist = Wire(DistType)
s.give_msg_wire = Wire(PacketType)
# Connections
for i in range(s.num_outports):
s.give_ens[i] //= s.give[i].en
# Routing logic
@update
def up_left_right_dist():
if s.get.ret.dst < s.pos:
s.left_dist @= zext(s.pos, DistType) - zext(
s.get.ret.dst, DistType)
s.right_dist @= zext(s.last_idx, DistType) - zext(
s.pos, DistType) + zext(s.get.ret.dst, DistType) + 1
else:
s.left_dist @= 1 + zext(s.last_idx, DistType) + zext(
s.pos, DistType) - zext(s.get.ret.dst, DistType)
s.right_dist @= zext(s.get.ret.dst, DistType) - zext(
s.pos, DistType)
@update
def up_ru_routing():
s.out_dir @= 0
s.give_msg_wire @= s.get.ret
for i in range(s.num_outports):
s.give[i].rdy @= 0
if s.get.rdy:
if s.pos == s.get.ret.dst:
s.out_dir @= SELF
elif s.left_dist < s.right_dist:
s.out_dir @= LEFT
else:
s.out_dir @= RIGHT
if (s.pos == s.last_idx) & (s.out_dir == RIGHT):
s.give_msg_wire.vc_id @= 1
elif (s.pos == 0) & (s.out_dir == LEFT):
s.give_msg_wire.vc_id @= 1
s.give[s.out_dir].rdy @= 1
s.give[s.out_dir].ret @= s.give_msg_wire
@update
def up_ru_get_en():
s.get.en @= s.give_ens > 0
def construct(s, PositionType, plen_field_name='plen'):
# Local parameter
assert PitonNoCHeader.nbits == 64
s.num_outports = 5
s.PhitType = Bits64
s.STATE_HEADER = 0
s.STATE_BODY = 1
PLenType = Bits8
XType = get_field_type(PositionType, 'pos_x')
YType = get_field_type(PositionType, 'pos_y')
# Interface
s.get = GetIfcRTL(s.PhitType)
s.pos = InPort(
PositionType) # TODO: figure out a way to encode position
s.give = [GiveIfcRTL(s.PhitType) for _ in range(s.num_outports)]
s.hold = [OutPort(Bits1) for _ in range(s.num_outports)]
# Components
s.header = Wire(PitonNoCHeader)
s.state = Wire(Bits1)
s.state_next = Wire(Bits1)
s.out_dir_r = Wire(Bits3)
s.out_dir = Wire(Bits3)
s.any_give_en = Wire(Bits1)
s.offchip = Wire(Bits1)
s.dst_x = Wire(Bits8)
s.dst_y = Wire(Bits8)
s.counter = Counter(PLenType)
s.counter.incr //= 0
s.counter.load_value //= s.header.plen
connect_bitstruct(s.get.ret, s.header)
for i in range(5):
s.get.ret //= s.give[i].ret
s.get.en //= s.any_give_en
@update
def up_any_give_en():
s.any_give_en @= 0
for i in range(s.num_outports):
if s.give[i].en:
s.any_give_en @= 1
# State transition logic
@update_ff
def up_state_r():
if s.reset:
s.state <<= s.STATE_HEADER
else:
s.state <<= s.state_next
@update
def up_state_next():
s.state_next @= s.state
if s.state == s.STATE_HEADER:
# If the packet has body flits
if s.any_give_en & (s.header.plen > 0):
s.state_next @= s.STATE_BODY
else: # STATE_BODY
if (s.counter.count == 1) & s.any_give_en:
s.state_next @= s.STATE_HEADER
# State output logic
@update
def up_counter_decr():
s.counter.decr @= 0
if s.state != s.STATE_HEADER:
s.counter.decr @= s.any_give_en
@update
def up_counter_load():
s.counter.load @= 0
if s.state == s.STATE_HEADER:
s.counter.load @= (s.state_next == s.STATE_BODY)
# Routing logic
s.offchip //= s.header.chipid[13]
@update
def up_dst():
s.dst_x @= 0
s.dst_y @= 0
if ~s.offchip:
s.dst_x @= s.header.xpos
s.dst_y @= s.header.ypos
@update
def up_out_dir():
s.out_dir @= s.out_dir_r
if (s.state == s.STATE_HEADER) & s.get.rdy:
s.out_dir @= 0
# Offchip port
if (s.pos.pos_x == 0) & (s.pos.pos_y == 0) & s.offchip:
s.out_dir @= WEST
elif (s.dst_x == s.pos.pos_x) & (s.dst_y == s.pos.pos_y):
s.out_dir @= SELF
elif s.dst_x < s.pos.pos_x:
s.out_dir @= WEST
elif s.dst_x > s.pos.pos_x:
s.out_dir @= EAST
elif s.dst_y < s.pos.pos_y:
s.out_dir @= NORTH
elif s.dst_y > s.pos.pos_y:
s.out_dir @= SOUTH
@update_ff
def up_out_dir_r():
s.out_dir_r <<= s.out_dir
@update
def up_give_rdy_hold():
for i in range(s.num_outports):
s.give[i].rdy @= (i == s.out_dir) & s.get.rdy
s.hold[i] @= (i == s.out_dir) & (s.state == s.STATE_BODY)
def construct(s, PacketType, PositionType, ncols=2, nrows=2):
# Constants
num_outports = 5
s.ncols = ncols
s.nrows = nrows
# Here we add 1 to avoid overflow
posx_type = mk_bits(clog2(ncols))
posy_type = mk_bits(clog2(nrows))
ns_dist_type = mk_bits(clog2(nrows + 1))
we_dist_type = mk_bits(clog2(ncols + 1))
s.last_row_id = nrows - 1
s.last_col_id = ncols - 1
# Interface
s.get = GetIfcRTL(PacketType)
s.give = [GiveIfcRTL(PacketType) for _ in range(num_outports)]
s.pos = InPort(PositionType)
# Componets
s.out_dir = Wire(Bits3)
s.give_ens = Wire(Bits5)
s.turning = Wire(Bits1)
s.north_dist = Wire(ns_dist_type)
s.south_dist = Wire(ns_dist_type)
s.west_dist = Wire(we_dist_type)
s.east_dist = Wire(we_dist_type)
s.give_msg_wire = Wire(PacketType)
# Connections
for i in range(num_outports):
s.give_ens[i] //= s.give[i].en
s.give_msg_wire //= s.give[i].ret
# Calculate distance
@update
def up_ns_dist():
if s.get.ret.dst_y < s.pos.pos_y:
s.south_dist @= zext(s.pos.pos_y, ns_dist_type) - zext(
s.get.ret.dst_y, ns_dist_type)
s.north_dist @= s.last_row_id - zext(
s.pos.pos_y, ns_dist_type) + 1 + zext(
s.get.ret.dst_y, ns_dist_type)
else:
s.south_dist @= zext(s.pos.pos_y,
ns_dist_type) + 1 + s.last_row_id - zext(
s.get.ret.dst_y, ns_dist_type)
s.north_dist @= zext(s.get.ret.dst_y, ns_dist_type) - zext(
s.pos.pos_y, ns_dist_type)
@update
def up_we_dist():
if s.get.ret.dst_x < s.pos.pos_x:
s.west_dist @= zext(s.pos.pos_x, we_dist_type) - zext(
s.get.ret.dst_x, we_dist_type)
s.east_dist @= s.last_col_id - zext(
s.pos.pos_x, we_dist_type) + 1 + zext(
s.get.ret.dst_x, we_dist_type)
else:
s.west_dist @= zext(s.pos.pos_x,
we_dist_type) + 1 + s.last_col_id - zext(
s.get.ret.dst_x, we_dist_type)
s.east_dist @= zext(s.get.ret.dst_x, we_dist_type) - zext(
s.pos.pos_x, we_dist_type)
# Routing logic
@update
def up_ru_routing():
s.give_msg_wire @= s.get.ret
s.out_dir @= 0
s.turning @= 0
for i in range(num_outports):
s.give[i].rdy @= 0
if s.get.rdy:
if (s.pos.pos_x == s.get.ret.dst_x) & (s.pos.pos_y
== s.get.ret.dst_y):
s.out_dir @= SELF
elif s.get.ret.dst_y != s.pos.pos_y:
s.out_dir @= NORTH if s.north_dist < s.south_dist else SOUTH
else:
s.out_dir @= WEST if s.west_dist < s.east_dist else EAST
# Turning logic
s.turning @= ( s.get.ret.src_x == s.pos.pos_x ) & \
( s.get.ret.src_y != s.pos.pos_y ) & \
( s.out_dir == WEST ) | ( s.out_dir == EAST )
# Dateline logic
if s.turning:
s.give_msg_wire.vc_id @= 0
if (s.pos.pos_x == 0) & (s.out_dir == WEST):
s.give_msg_wire.vc_id @= 1
elif (s.pos.pos_x == s.last_col_id) & (s.out_dir == EAST):
s.give_msg_wire.vc_id @= 1
elif (s.pos.pos_y == 0) & (s.out_dir == SOUTH):
s.give_msg_wire.vc_id @= 1
elif (s.pos.pos_y == s.last_row_id) & (s.out_dir == NORTH):
s.give_msg_wire.vc_id @= 1
s.give[s.out_dir].rdy @= 1
@update
def up_ru_get_en():
s.get.en @= s.give_ens > 0
def construct(s, HeaderFormat, num_outports=4, plen_field_name='plen'):
# Meta data
s.num_outports = num_outports
s.HeaderFormat = HeaderFormat
s.PhitType = mk_bits(HeaderFormat.nbits)
dir_nbits = clog2(num_outports) if num_outports > 1 else 1
DirType = mk_bits(dir_nbits)
PLenType = get_plen_type(HeaderFormat)
s.STATE_HEADER = b1(0)
s.STATE_BODY = b1(1)
# Interface
s.get = GetIfcRTL(s.PhitType)
s.give = [GiveIfcRTL(s.PhitType) for _ in range(s.num_outports)]
s.hold = [OutPort(Bits1) for _ in range(s.num_outports)]
# Components
s.header = Wire(HeaderFormat)
s.state = Wire()
s.state_next = Wire()
s.out_dir_r = Wire(dir_nbits)
s.out_dir = Wire(dir_nbits)
s.any_give_en = Wire()
s.counter = Counter(PLenType)
s.counter.incr //= 0
s.counter.load_value //= s.header.plen
@update
def up_header():
s.header @= s.get.ret
for i in range(s.num_outports):
s.get.ret //= s.give[i].ret
s.get.en //= s.any_give_en
@update
def up_any_give_en():
s.any_give_en @= 0
for i in range(s.num_outports):
if s.give[i].en:
s.any_give_en @= 1
# State transition logic
@update_ff
def up_state_r():
if s.reset:
s.state <<= s.STATE_HEADER
else:
s.state <<= s.state_next
@update
def up_state_next():
s.state_next @= s.state
if s.state == s.STATE_HEADER:
# If the packet has body flits
if s.any_give_en & (s.header.plen > 0):
s.state_next @= s.STATE_BODY
else: # STATE_BODY
if (s.counter.count == 1) & s.any_give_en:
s.state_next @= s.STATE_HEADER
# State output logic
@update
def up_counter_decr():
if s.state == s.STATE_HEADER:
s.counter.decr @= 0
else:
s.counter.decr @= s.any_give_en
@update
def up_counter_load():
if s.state == s.STATE_HEADER:
s.counter.load @= (s.state_next == s.STATE_BODY)
else:
s.counter.load @= 0
# Routing logic
# TODO: Figure out how to encode dest id
@update
def up_out_dir():
if (s.state == s.STATE_HEADER) & s.get.rdy:
s.out_dir @= s.header.dst[0:dir_nbits]
else:
s.out_dir @= s.out_dir_r
@update_ff
def up_out_dir_r():
s.out_dir_r <<= s.out_dir
@update
def up_give_rdy_hold():
for i in range(s.num_outports):
s.give[i].rdy @= (i == s.out_dir) & s.get.rdy
s.hold[i] @= (i == s.out_dir) & (s.state == s.STATE_BODY)
def construct(s, HeaderFormat, PositionType, plen_field_name='plen'):
# Meta data
s.num_outports = 5
s.HeaderFormat = HeaderFormat
s.PhitType = mk_bits(HeaderFormat.nbits)
s.STATE_HEADER = b1(0)
s.STATE_BODY = b1(1)
PLenType = get_plen_type(HeaderFormat)
# Interface
s.get = GetIfcRTL(s.PhitType)
s.pos = InPort(
PositionType) # TODO: figure out a way to encode position
s.give = [GiveIfcRTL(s.PhitType) for _ in range(s.num_outports)]
s.hold = [OutPort(Bits1) for _ in range(s.num_outports)]
# Components
s.header = Wire(HeaderFormat)
s.state = Wire(Bits1)
s.state_next = Wire(Bits1)
s.out_dir_r = Wire(Bits3)
s.out_dir = Wire(Bits3)
s.any_give_en = Wire(Bits1)
s.counter = m = Counter(PLenType)
m.incr //= 0
m.load_value //= s.header.plen
@update
def up_get_ret():
s.header @= s.get.ret
for i in range(5):
s.get.ret //= s.give[i].ret
s.get.en //= s.any_give_en
@update
def up_any_give_en():
s.any_give_en @= 0
for i in range(s.num_outports):
if s.give[i].en:
s.any_give_en @= 1
# State transition logic
@update_ff
def up_state_r():
if s.reset:
s.state <<= s.STATE_HEADER
else:
s.state <<= s.state_next
@update
def up_state_next():
if s.state == s.STATE_HEADER:
# If the packet has body flits
if s.any_give_en & (s.header.plen > 0):
s.state_next @= s.STATE_BODY
else:
s.state_next @= s.STATE_HEADER
else: # STATE_BODY
if (s.counter.count == 1) & s.any_give_en:
s.state_next @= s.STATE_HEADER
else:
s.state_next @= s.STATE_BODY
# State output logic
@update
def up_counter_decr():
if s.state == s.STATE_HEADER:
s.counter.decr @= 0
else:
s.counter.decr @= s.any_give_en
@update
def up_counter_load():
if s.state == s.STATE_HEADER:
s.counter.load @= (s.state_next == s.STATE_BODY)
else:
s.counter.load @= 0
# Routing logic
# TODO: Figure out how to encode dest id
@update
def up_out_dir():
if (s.state == s.STATE_HEADER) & s.get.rdy:
if (s.header.dst_x == s.pos.pos_x) & (s.header.dst_y
== s.pos.pos_y):
s.out_dir @= SELF
elif s.header.dst_x < s.pos.pos_x:
s.out_dir @= WEST
elif s.header.dst_x > s.pos.pos_x:
s.out_dir @= EAST
elif s.header.dst_y < s.pos.pos_y:
s.out_dir @= SOUTH
else:
s.out_dir @= NORTH
else:
s.out_dir @= s.out_dir_r
@update_ff
def up_out_dir_r():
s.out_dir_r <<= s.out_dir
@update
def up_give_rdy_hold():
for i in range(s.num_outports):
s.give[i].rdy @= (i == s.out_dir) & s.get.rdy
s.hold[i] @= (i == s.out_dir) & (s.state == s.STATE_BODY)