def of_demo_10():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 10 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP DSCP
# IP ECN
# UDP Source Port Number
# UDP Destination Port Number
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
eth_type = ETH_TYPE_IPv4
eth_src = "00:00:00:11:23:ae"
eth_dst = "20:14:29:01:19:61"
ipv4_src = "192.1.2.3/10"
ipv4_dst = "172.168.5.6/18"
ip_proto = IP_PROTO_UDP
ip_dscp = IP_DSCP_CS1 # 'Class Selector' = 'Priority'
ip_ecn = IP_ECN_CE # Congestion Encountered
udp_src_port = 25364
udp_dst_port = 8080
input_port = 13
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" UDP Source Port Number (%s)\n"
" UDP Destination Port Number (%s)\n"
" Input Port (%s)" %
(hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp, ip_ecn,
udp_src_port, udp_dst_port,
input_port))
print (" Action: Output (NORMAL)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 17
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(flow_priority=1008)
# --- Instruction: 'Apply-actions'
# Action: 'Output' NORMAL
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# UDP Source Port Number
# UDP Destination Port Number
# Input Port
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_ipv4_src(ipv4_src)
match.set_ipv4_dst(ipv4_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_ip_ecn(ip_ecn)
match.set_udp_src(udp_src_port)
match.set_udp_dst(udp_dst_port)
match.set_in_port(input_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_17():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 17 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IP DSCP
# UDP Source Port
# UDP Destination Port
eth_type = ETH_TYPE_IPv6
ipv6_src = "fe80::2acf:e9ff:fe21:6431/128"
ipv6_dst = "aabb:1234:2acf:e9ff::fe21:6431/64"
ip_dscp = IP_DSCP_CS1 # 'Class Selector' = 'Priority'
ip_proto = IP_PROTO_UDP
udp_src_port = 25364
udp_dst_port = 7777
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IP DSCP (%s)\n"
" UDP Source Port (%s)\n"
" UDP Destination Port (%s)" %
(hex(eth_type), ipv6_src, ipv6_dst,
ip_dscp, udp_src_port, udp_dst_port))
print (" Action: Output (to %s)" %
(output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name="demo17.py")
table_id = 0
flow_id = 23
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(flow_priority=1015)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IPv6 Source Address
# IPv6 Destination Address
# IP protocol number (UDP)
# IP DSCP
# UDP Source Port
# UDP Destination Port
match = Match()
match.set_eth_type(eth_type)
match.set_ipv6_src(ipv6_src)
match.set_ipv6_dst(ipv6_dst)
match.set_ip_proto(ip_proto)
match.set_ip_dscp(ip_dscp)
match.set_udp_src(udp_src_port)
match.set_udp_dst(udp_dst_port)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully read from the Controller")
print ("Flow info:")
flow = result.get_data()
print json.dumps(flow, indent=4)
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Delete flow with id of '%s' from the Controller's cache "
"and from the table '%s' on the '%s' node" %
(flow_id, table_id, nodeName))
time.sleep(rundelay)
result = ofswitch.delete_flow(flow_entry.get_flow_table_id(),
flow_entry.get_flow_id())
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully removed from the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
def of_demo_40():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 40 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify IP packet example1"
priority = 900
cookie = 1300
match_in_port = 10
match_eth_type = ETH_TYPE_IPv4
match_ip_proto = IP_PROTO_TCP
match_ipv4_src_addr = "192.1.2.0/24"
match_ipv4_dst_addr = "173.194.123.40/32"
match_tcp_dst_port = 8080
act_mod_ipv4_src_addr = "212.16.1.8/32"
act_mod_ipv4_dst_addr = "52.87.12.11/32"
act_mod_tcp_src_port = 8888
act_mod_tcp_dst_port = 9999
act_out_port = 119
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IP Protocol (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" TCP Destination Port (%s)" %
(match_in_port,
hex(match_eth_type),
match_ip_proto,
match_ipv4_src_addr,
match_ipv4_dst_addr,
match_tcp_dst_port))
print (" Actions: Modify IPv4 Source Address (%s)\n"
" Modify IPv4 Destination Address (%s)\n"
" Modify TCP Source Port (%s)\n"
" Modify TCP Destination Port (%s)\n"
" Output (%s)" %
(act_mod_ipv4_src_addr,
act_mod_ipv4_dst_addr,
act_mod_tcp_src_port,
act_mod_tcp_dst_port,
act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetNwSrcAction(action_order)
action.set_nw_src(act_mod_ipv4_src_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetNwDstAction(action_order)
action.set_nw_dst(act_mod_ipv4_dst_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetTpSrcAction(action_order)
action.set_tp_src(act_mod_tcp_src_port)
instruction.add_apply_action(action)
action_order += 1
action = SetTpDstAction(action_order)
action.set_tp_dst(act_mod_tcp_dst_port)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ip_proto(match_ip_proto)
match.set_ipv4_src(match_ipv4_src_addr)
match.set_ipv4_dst(match_ipv4_dst_addr)
match.set_tcp_dst(match_tcp_dst_port)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
# ---------------------------------------------------
# Second flow entry
# ---------------------------------------------------
table_id = 0
flow_id += 1
flow_name = "Modify IP packet example2"
priority = 900
cookie = 1300
match_in_port = 110
match_eth_type = ETH_TYPE_IPv4
match_ip_proto = IP_PROTO_UDP
match_ipv4_src_addr = "10.1.0.0/16"
match_ipv4_dst_addr = "168.1.1.101/32"
match_udp_dst_port = 1812
act_mod_ipv4_src_addr = "172.101.1.9/32"
act_mod_ipv4_dst_addr = "172.101.1.1/32"
act_mod_udp_src_port = 5555
act_mod_udp_dst_port = 7777
act_out_port = 120
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IP Protocol (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" UDP Destination Port (%s)" %
(match_in_port,
hex(match_eth_type),
match_ip_proto,
match_ipv4_src_addr,
match_ipv4_dst_addr,
match_udp_dst_port))
print (" Actions: Set Field (IPv4 Source Address %s)\n"
" Set Field (IPv4 Destination Address %s)\n"
" Set Field (UDP Source Port %s)\n"
" Set Field (UDP Destination Port %s)\n"
" Output (%s)" %
(act_mod_ipv4_src_addr,
act_mod_ipv4_dst_addr,
act_mod_udp_src_port,
act_mod_udp_dst_port,
act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry2 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry2.set_flow_table_id(table_id)
flow_entry2.set_flow_name(flow_name)
flow_entry2.set_flow_id(flow_id)
flow_entry2.set_flow_cookie(cookie)
flow_entry2.set_flow_priority(priority)
flow_entry2.set_flow_hard_timeout(0)
flow_entry2.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetFieldAction(action_order)
action.set_ipv4_src(act_mod_ipv4_src_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_ipv4_dst(act_mod_ipv4_dst_addr)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_udp_src(act_mod_udp_src_port)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_udp_dst(act_mod_udp_dst_port)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry2.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ip_proto(match_ip_proto)
match.set_ipv4_src(match_ipv4_src_addr)
match.set_ipv4_dst(match_ipv4_dst_addr)
match.set_udp_dst(match_udp_dst_port)
flow_entry2.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry2.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry2)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.detailed())
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
exit(0)
print ("\n")
print ("<<< Delete flows from the Controller's cache "
"and from the table '%s' on the '%s' node" % (table_id, nodeName))
time.sleep(rundelay)
delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
print ("\n")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")
print (">>> Demo End")
print (">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>")