class ShimmerBluetooth:
"""Main API for communicating with the Shimmer via Bluetooth
:arg serial: The serial interface to use for communication
"""
def __init__(self, serial: Serial):
self._serial = BluetoothSerial(serial)
self._bluetooth = BluetoothRequestHandler(self._serial)
self._thread = Thread(target=self._run_readloop, daemon=True)
def __enter__(self):
self.initialize()
return self
def __exit__(self, exc_type, exc_value, exc_traceback):
self.shutdown()
def initialize(self) -> None:
"""Initialize the reading loop of the API
Initialize the reading loop by starting a new thread to handle all reads asynchronously
"""
self._thread.start()
def shutdown(self) -> None:
"""Shutdown the read loop
Shutdown the read loop by stopping the read thread
"""
self._serial.cancel_read()
self._thread.join()
self._serial.close()
self._bluetooth.clear_queues()
def _run_readloop(self):
try:
while True:
self._bluetooth.process_single_input_event()
except ReadAbort:
print('Read loop exciting after cancel request')
def _process_and_wait(self, cmd):
compl_obj, return_obj = self._bluetooth.queue_command(cmd)
compl_obj.wait()
if return_obj is not None:
return return_obj.wait()
return None
def add_stream_callback(self, cb: Callable[[DataPacket], None]) -> None:
"""Add a stream callback which is called when a new data packet arrives
:param cb: a function with a single argument
"""
self._bluetooth.add_stream_callback(cb)
def remove_stream_callback(self, cb: Callable[[DataPacket], None]) -> None:
"""Remove the callback from the list of active callbacks
:param cb: The callback function to remove
"""
self._bluetooth.remove_stream_callback(cb)
def add_status_callback(self, cb: Callable[[List[bool]], None]) -> None:
"""Add a status callback which is called when a new status update from the Shimmer arrives
:param cb: a function with a single argument. The argument is the same value is the return value of the
:meth:`pyshimmer.bluetooth.bt_api.ShimmerBluetooth.get_status` method.
"""
self._bluetooth.add_status_callback(cb)
def remove_status_callback(self, cb: Callable[[List[bool]], None]) -> None:
"""Remove the callback from the list of active callbacks
:param cb: The callback function to remove
"""
self._bluetooth.remove_status_callback(cb)
def get_sampling_rate(self) -> float:
"""Retrieve the sampling rate of the device
:return: The sampling rate as floating point value in samples per second
"""
return self._process_and_wait(GetSamplingRateCommand())
def get_config_time(self) -> int:
"""Get the config time from the device as configured in the configuration file
:return: The config time as integer
"""
return self._process_and_wait(GetConfigTimeCommand())
def set_config_time(self, time: int) -> None:
"""Set the config time of the device
:arg time: The configuration time that will be set in the configuration of the Shimmer
"""
self._process_and_wait(SetConfigTimeCommand(time))
def get_rtc(self) -> float:
"""Retrieve the current value of the onboard real-time clock
:return: The current time of the device in seconds as UNIX timestamp
"""
return self._process_and_wait(GetRealTimeClockCommand())
def set_rtc(self, time_sec: float) -> None:
"""Set the value of the onboard real-time clock
Should be set as a UTC UNIX timestamp such that the resulting recordings have universal timestamps
:param time_sec: The UNIX timestamp in seconds
"""
self._process_and_wait(SetRealTimeClockCommand(time_sec))
def get_status(self) -> List[bool]:
"""Get the status of the device
:return: A list of 8 bools which signal:
dev_docked, dev_sensing, rtc_set, dev_logging, dev_streaming, sd_card_present, sd_error, status_red_led
"""
return self._process_and_wait(GetStatusCommand())
def get_firmware_version(self) -> Tuple[EFirmwareType, int, int, int]:
"""Get the version of the running firmware
:return: A tuple of four values:
- The firmware type as enum, i.e. SDLog, LogAndStream, ...
- the major version as int
- the minor version as int
- the patch level as int
"""
return self._process_and_wait(GetFirmwareVersionCommand())
def get_exg_register(self, chip_id: int) -> ExGRegister:
"""Get the current configuration of one of the two ExG registers of the device
Note that this command only returns meaningful results if the device features ECG chips
:param chip_id: The ID of the chip, one of [0, 1]
:return: An ExGRegister object that presents the register contents in an easily processable manner
"""
return self._process_and_wait(GetEXGRegsCommand(chip_id))
def set_exg_register(self, chip_id: int, offset: int, data: bytes) -> None:
"""Configure part of the memory of the ExG registers
:param chip_id: The ID of the chip, one of [0, 1]
:param offset: The offset at which to write the data bytes
:param data: The data bytes to write
"""
self._process_and_wait(SetEXGRegsCommand(chip_id, offset, data))
def get_device_name(self) -> str:
"""Retrieve the device name
:return: The device name as string
"""
return self._process_and_wait(GetDeviceNameCommand())
def set_device_name(self, dev_name: str) -> None:
"""Set the device name
:param dev_name: The device name to set
"""
self._process_and_wait(SetDeviceNameCommand(dev_name))
def get_experiment_id(self) -> str:
"""Retrieve the experiment id as string
:return: The experiment ID as string
"""
return self._process_and_wait(GetExperimentIDCommand())
def set_experiment_id(self, exp_id: str) -> None:
"""Set the experiment ID for the device
:param exp_id: The id to set for the device
"""
self._process_and_wait(SetExperimentIDCommand(exp_id))
def get_inquiry(self) -> Tuple[float, int, List[EChannelType]]:
"""Perform inquiry command
:return: A tuple of 3 values:
- The sampling rate as float
- The buf size of the device
- The active data channels of the device as list, does not include the TIMESTAMP channel
"""
return self._process_and_wait(InquiryCommand())
def get_data_types(self):
"""Get the active data channels of the device
These data channels will be contained in a DataPacket when streaming
:return: A list of data channels, always containing the TIMESTAMP channel
"""
_, _, ctypes = self.get_inquiry()
# The Timestamp is always present in data packets
ctypes = [EChannelType.TIMESTAMP] + ctypes
return ctypes
def start_streaming(self) -> None:
"""Start streaming data
"""
ctypes = self.get_data_types()
stream_types = [(t, ChDataTypeAssignment[t]) for t in ctypes]
self._bluetooth.set_stream_types(stream_types)
self._process_and_wait(StartStreamingCommand())
def stop_streaming(self) -> None:
"""Stop streaming data
Note that the interface will possibly return more data packets that have already been received and are in the
input buffer.
"""
self._process_and_wait(StopStreamingCommand())
def start_logging(self) -> None:
"""Start logging data to the SD card of the device
"""
self._process_and_wait(StartLoggingCommand())
def stop_logging(self) -> None:
"""Stop logging data to the SD card of the device
"""
self._process_and_wait(StopLoggingCommand())
def send_ping(self) -> None:
"""Send a ping command to the device
The command can be used to test the connection. It does not return anything.
"""
self._process_and_wait(DummyCommand())
class ShimmerBluetooth:
def __init__(self, serial: Serial):
self._serial = BluetoothSerial(serial)
self._thread = Thread(target=self._run_readloop, daemon=True)
self._stop = False
self._ack_queue = Queue()
self._resp_queue = Queue()
self._stream_types = []
self._stream_cbs = []
def __enter__(self):
self.initialize()
return self
def __exit__(self, exc_type, exc_value, exc_traceback):
self.shutdown()
def initialize(self) -> None:
"""Initialize the reading loop of the API
Initialize the reading loop by starting a new thread to handle all reads asynchronously
"""
self._thread.start()
self.send_ping()
def shutdown(self) -> None:
"""Shutdown the read loop
Shutdown the read loop by stopping the read thread
"""
self._serial.cancel_read()
self._thread.join()
self._serial.close()
def _run_readloop(self):
try:
self._readloop()
except ReadAbort:
print('Read loop exciting after cancel request')
def _readloop(self):
while True:
peek = self._serial.peek()
if peek == ACK_COMMAND_PROCESSED:
self._serial.read_ack()
compl_obj = self._ack_queue.get_nowait()
compl_obj.set_completed()
elif peek == DATA_PACKET:
packet = DataPacket(self._stream_types)
packet.receive(self._serial)
[cb(packet) for cb in self._stream_cbs]
else:
cmd, return_obj = self._resp_queue.get_nowait()
resp_code = cmd.get_response_code()
if peek != resp_code:
raise ValueError(f'Expecting response code 0x{resp_code:x} but found 0x{peek:x}')
result = cmd.receive(self._serial)
return_obj.set_result(result)
def _process_command(self, cmd: ShimmerCommand):
compl_obj = RequestCompletion()
self._ack_queue.put_nowait(compl_obj)
if cmd.has_response():
return_obj = RequestResponse()
self._resp_queue.put_nowait((cmd, return_obj))
else:
return_obj = None
cmd.send(self._serial)
return compl_obj, return_obj
def _process_and_wait(self, cmd):
compl_obj, return_obj = self._process_command(cmd)
compl_obj.wait()
if return_obj is not None:
return return_obj.wait()
return None
def add_stream_callback(self, cb):
self._stream_cbs += [cb]
def remove_stream_callback(self, cb):
self._stream_cbs.remove(cb)
def get_sampling_rate(self) -> float:
return self._process_and_wait(GetSamplingRateCommand())
def get_config_time(self) -> int:
return self._process_and_wait(GetConfigTimeCommand())
def set_config_time(self, ut_ms: int) -> None:
"""Set the config time of the device as unix timestamp in milliseconds
Set the time of the device to the supplied Unix millisecond timestamp (since Jan 1st, 1970). See Python
time.time() for more information.
Args:
ut_ms: An integer that represents the elapsed milliseconds since Jan 1st, 1970.
"""
self._process_and_wait(SetConfigTimeCommand(ut_ms))
def get_rtc(self) -> int:
return self._process_and_wait(GetRealTimeClockCommand())
def set_rtc(self, ut_ms: int) -> None:
self._process_and_wait(SetRealTimeClockCommand(ut_ms))
def get_status(self) -> List[bool]:
return self._process_and_wait(GetStatusCommand())
def get_firmware_version(self) -> Tuple[EFirmwareType, int, int, int]:
return self._process_and_wait(GetFirmwareVersionCommand())
def get_exg_register(self, chip_id) -> ExGRegister:
return self._process_and_wait(GetEXGRegsCommand(chip_id))
def set_exg_register(self, chip_id, offset, data) -> None:
self._process_and_wait(SetEXGRegsCommand(chip_id, offset, data))
def get_device_name(self) -> str:
return self._process_and_wait(GetDeviceNameCommand())
def set_device_name(self, dev_name: str) -> None:
self._process_and_wait(SetDeviceNameCommand(dev_name))
def get_experiment_id(self) -> str:
return self._process_and_wait(GetExperimentIDCommand())
def set_experiment_id(self, exp_id: str) -> None:
self._process_and_wait(SetExperimentIDCommand(exp_id))
def get_inquiry(self) -> Tuple[float, int, List[EChannelType]]:
return self._process_and_wait(InquiryCommand())
def get_data_types(self):
_, _, ctypes = self.get_inquiry()
# The Timestamp is always present in data packets
ctypes = [EChannelType.TIMESTAMP] + ctypes
return ctypes
def start_streaming(self) -> None:
ctypes = self.get_data_types()
self._stream_types = [(t, ChDataTypeAssignment[t]) for t in ctypes]
self._process_and_wait(StartStreamingCommand())
def stop_streaming(self) -> None:
self._process_and_wait(StopStreamingCommand())
def start_logging(self) -> None:
self._process_and_wait(StartLoggingCommand())
def stop_logging(self) -> None:
self._process_and_wait(StopLoggingCommand())
def send_ping(self) -> None:
self._process_and_wait(DummyCommand())